4820-14-403-0371

1315-14-471-1827 1315144711827 144711827 PROJECTILE AND PROPELLING CHARGE,105 MILLIMETER,PRACTICE

3120-01-471-1827 3120014711827 014711827 BUSHING SET,PISTON

5935-00-471-1827 5935004711827 004711827 is the main or principal part of a connector, receptacle, electrical which includes insert(s) designed to accommodate but does not include removable contacts. it may have a hood or shell, a jackscrew and jacksocket, or other means for polarizing and aligning. it is designed to be mounted on a bulkhead, chassis, panel, wall, or the like. excludes connector body, modular receptacle, electrical. for items without inserts, see shell, electrical connector.

5310-99-471-1827 5310994711827 994711827 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.