4820-14-302-7836

1 Jan 1970 4130-14-353-8593 Embiellage Complet E630J13RNCC: 5 | RNVC: 9 | DAC: 2 16 Jan 1979 4820-14-302-7836

5365-01-547-8305 5365015478305 015478305 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

5950-99-547-8305 5950995478305 995478305 is an item having either a single tapped winding (autotransformer type), or two or more windings designed to furnish inductive reactance and/or transfer electrical energy in circuits by means of a magnetic field. it is so designed that its entire intended range of operations is above 20 kilohertz (kilocycles). the minimum value may extend into the audio frequency range (below 20 kilohertz). it may include integral capacitors, coils, resistors, and adjustable tuning cores. for items having only two active terminals see coil, radio frequency. includes types having windings which may be moved with respect to each other. excludes transformer, discriminator.

4140-14-547-8305 4140145478305 145478305 is a nonpositive displacement mechanical device having an axial fan impeller with or without a protective enclosure. it is designed to circulate air under free-airflow conditions, and may be equipped with a baffle(s) to deflect the air radially. it may be suspended from the ceiling, attached to the wall, or stand on a horizontal surface.

5950-00-547-8305 5950005478305 005478305