4820-12-362-1681

| DAC: 1 14 Oct 1988 4820-12-315-3738 Check Valve 3085RNCC: 3 | RNVC: 2 | DAC: 1 18 Oct 1988 4820-12-362-1681

Kg (CAGE Code C3657) | DAC: 1 18 Oct 1988 4820-12-362-1681 Globe Valve 4229RNCC: 3 | RNVC: 2 | DAC: 3

CAGE 2633H Trinity Media Entertainment in Warszawa, Mazowieckie Poland

5330-66-132-1177 5330661321177 661321177 is a circular shaped item with an aperture manufactured to predetermined dimensions and designed for use as a seal in stuffing boxes, packing nuts, and the like. it may be (1) any nonmetallic molded or formed ring (except solid (without joint) rings having a square or rectangular cross section); or (2) any shredded metal or metal foil type metallic or semimetallic rings. excludes felt items but includes multimaterial items in which one of the materials is felt. for solid (without joints) nonmetallic items with a square or rectangular cross section, see washer (as modified) and gasket. for rubber items specifically designed for weather-proofing doors, windows, chests, and the like see seal, nonmetallic angle; seal, nonmetallic channel; and seal, nonmetallic, special shaped section. for circular (with aperature) nonmetallic items with a solid round cross-section see o-ring. excludes cup, compression; gasket; washer (as modified); and felt, mechanical, preformed.

3120-99-562-1518 3120995621518 995621518 is an item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. it is designed for applications involving moving (kinetic) loads. except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. the thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. see also washer, flat and spacer, sleeve.