4820-66-132-6376

Oct 2002 4330-01-378-1562 Fluid Filter Element 11004919RNCC: 5 | RNVC: 2 | DAC: 3 12 Aug 1993 4820-66-132-6376

your web browser . 4820-12-338-4157System Pressure Regulating Valve4820123384157 123384157 34L0049 KVL 15
(Active) Primary Buy RNCC 3 RNVC 2 DAC 3 KVL 15 C1787 - Danfoss Power Solutions Gmbh & Co.

4820-22-257-8639 4820222578639 222578639 is a valve designed to automatically maintain within close limits a predetermined outlet pressure which may be adjustable within a specified range regardless of the higher fluctuating or constant inlet pressure. it is designed for use with compressed gas(es) and various liquids and may include gauges. it may be inline or cartridge (manifold) design. excludes regulator, pressure, medical gas administration apparatus; regulator, oxygen, barometric continuous flow; regulator, oxygen demand; regulator, oxygen diluter demand; and valve(1), fluid pressure regulating, aircraft.

4320-14-522-2164 4320145222164 145222164 is a governor specifically designed to regulate the discharge pressure of reciprocating or turbine driven pumps. it may be actuated by either the pump discharge fluid or air flow from an external pilot valve.

5365-14-031-3339 5365140313339 140313339 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.