4810-01-043-9911

https//www.nsnlookup.com /cage Itt Aerospace Controls Llc (CAGE Code 73760) DAC: X 1 Jan 1963 4810-01-043-9911

5815-00-129-1917 5815001291917 001291917 WINDOW

5 Apr 1974 5315-00-687-5272 Headless Grooved Pin 16503ARNCC: 3 | RNVC: 2 | DAC: X 1 Jan 1963 4810-01-043-9911

4730-01-101-0089 4730011010089 011010089 is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. it may have side or heel inlet(s). see also elbow, tube; and connector, multiple, fluid pressure line. excludes bend, soil pipe.

5365-01-583-7458 5365015837458 015837458 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.