4810-15-198-0563

Documents 5999-14-323-8713 1+ Documents ( More... ) https//www.nsnlookup.com /fsg-48/fsc-4810/it 4810-15-198-0563
Valvola Aspirazione 4810151980563 151980563 Documents 4810-15-198-0563 2+ Documents ( More... )

1997 3040-15-121-1803 Shouldered Shaft 01-03-1113-57-CRNCC: 3 | RNVC: 2 | DAC: 1 31 Jan 1996 4810-15-198-0563

5310-14-209-6658 5310142096658 142096658 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

6640-14-396-6140 6640143966140 143966140 is a nonbulbous instrument calibrated with graduations along the cylindrical portion only.

8430-15-001-9808 8430150019808 150019808 is footwear made of a suitable material or a combination of suitable materials. they may be insulated and are primarily designed for protection at mean monthly temperatures below plus 14 degrees fahrenheit (minus 10 degrees celsius).