4810-12-321-3364

4810-14-503-7913 4810145037913 145037913 is an item which may have a cylindrical or other cross-sectional shape, with recess areas on the periphery. it is designed to control the flow direction in a linear directional control valve by the selection of various inlet and outlet ports in a sleeve or the valve body. the slide reciprocates thus mating recess areas with the various ports in the sleeve or valve body. it may have an off (no flow) position.

5330-14-503-7908 5330145037908 145037908 is a deformable material which prevents the passage of matter through the joint formed when two faces are joined. it may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. it may be made to any predetermined dimension and shape. excludes flat disks, items made of felt material and items having joints. for round metal and plastic items with an aperture and a solid rectangular cross section, see washer, flat; shim; bearing, washer, thrust; and spacer ring. excludes disk, valve; seal, nonmetallic angle; seal, nonmetallic channel; seal, nonmetallic special shaped section; shielding gasket, electronic; and ring, sealing jar.

5310-14-503-7912 5310145037912 145037912 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

4810-12-318-2512 4810123182512 123182512 PARTS KIT,SOLENOID VALVE