Valves, Powered - Canada (CA)
Federal Supply Class (FSC): 4810
NATO Supply Classification Class (NSC): 4810
Federal Supply Group (FSG): 48 Valves
NATO Supply Classification Group (NSG): 48 Valves
Items Managed by Canada (CA) - NCB is 20 or 21
Page 1 of 5
NSN Format for Valves, Powered
Codified by Canada
| 48 | 10 | 21 | XXX | XXXX | |||
|---|---|---|---|---|---|---|---|
| Group FSG | Class | NCB | Identifier | ||||
| FSC Federal Supply Class | NIIN | ||||||
| NSN | |||||||
NATO Supply Class 4810 is a classification for valves that are powered, meaning they require some form of external power source to operate. This class is part of NATO Supply Group 48, which is specifically dedicated to valves.
Valves in this class are typically used in various industries and applications where the control or regulation of fluid flow is required. Powered valves can be operated using different power sources such as electricity, hydraulics, or pneumatics, depending on the specific design and intended use.
These valves are essential components in systems that require precise control over the flow of liquids or gases. They can be found in a wide range of equipment and machinery, including industrial processes, power plants, pipelines, and transportation systems.
The NATO Supply Class 4810 for Valves, Powered, provides a standardized classification system that helps facilitate procurement, logistics, and inventory management within NATO member countries. It ensures that the right valves with specific power requirements can be identified and acquired efficiently for military and civilian purposes.
If you need more specific information about valves in this class or any other related topic, feel free to ask!
Includes Electric Motor Operated Valves; Hydraulic Operated Valves; Solenoid Operated Valves.
Excludes Engine Intake and Exhaust valves (FSC 2990, 2815); Valves specifically designed for use with fire fighting equipment (FSC 4210); plumbing equipment, and the like (FSC 4540).
Note-This group may include specially designed valves for use on individual types of equipment or systems. Excluded are such items as tire valves, engine intake and exhaust valves, explosive valves, carburetor valves, water mixing valves, and flush valves.
Frequently Asked Questions(FAQ) for Federal Supply Class 4810
- What is Federal Supply Class 4810?
- FSC 4810 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4810) in the USA for supply items codified in the category of Valves, Powered.
- What is NATO Supply Classification Class 4810?
- NSC 4810 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4810 in the USA) for supply items codified in the category of Valves, Powered.
- Which Federal Supply Group is FSC 4810 in?
- FSC 4810 is in Federal Supply Group (FSG) 48 which contains Valves.
- Which NATO Supply Classification Group is NSC 4810 in?
- NSC 4810 is in NATO Supply Classification Group (NSG) 48 which contains Valves.
Supply Items Included in Federal Supply Class 4810
- What is a Gate Valve? 29 Items
- A Gate Valve (VALVE,GATE) is a valve having a flat or tapered disk (gate) which moves transversely to the axis of flow by rotating or sliding movements of the stem to open or close the orifice. It may also contain an oval or rectangular shaped slide which may be manually, motor, or pressure operated through the means of an arm or arm assembly. The body flange may be designed to accommodate tube type connectors. It may or may not contain thermal relief features. Includes valve (gate) specifically designed for the control of fluid systems in aircraft or missiles.
- What is a Cross Valve? 33 Items
- A Cross Valve (VALVE,CROSS) is a valve with two connections on the run and a third and sometimes fourth connection at 90 degree (1.5708 radians) angle(s) to the run. The flow is controlled by the action of a stem which lifts a disk perpendicularly off of the center axis of its seat.
- What is a Globe Valve? 51 Items
- A Globe Valve (VALVE,GLOBE) is a valve with one inlet and one outlet connection with outlet flow parallel to inlet flow. The flow is controlled by the action of a stem which lifts the disk perpendicularly off the center axis of its seat. The stem is at a 90 degree (1.5708 radians) angle to axis of flow. Excludes VALVE, STOP-CHECK; COCK, SHUTOFF, SCREW STEM; and VALVE, SOLENOID.
- What is a Butterfly Valve? 43 Items
- A Butterfly Valve (VALVE,BUTTERFLY) is a valve that controls flow by a circular disk, or a pair of semicircular disks, attached to a common spindle or lever turning on a diametral axis.
- What is a Solenoid Valve? 386 Items
- A Solenoid Valve (VALVE,SOLENOID) is a valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see VALVE (1), LINEAR, DIRECTIONAL CONTROL. It may be inline or cartridge (manifold) design. Excludes VALVE (1), BUTTERFLY.
- What is a Ball Valve? 28 Items
- A Ball Valve (VALVE,BALL) is a multi-ported, nonlubricated valve designed to provide straight through flow or ability to direct a number of flows or pressure through a single valve. The flow is controlled by the rotation of a ported ball within a suitable ported seat(s). The ball is usually engaged by a stem. It is normally operated in an open or closed position. Excludes VALVE, CHECK.
- What is a Valve Seat? 63 Items
- A Valve Seat (SEAT,VALVE) is a replaceable item designed to provide a stationary seating surface for a mating, moveable item such as a valve disk or the like. The body may have a flange of various shapes. For diesel and gasoline reciprocating engines, see INSERT, ENGINE VALVE SEAT.
- What is a Fluid Pressure Regulating Valve? 51 Items
- A Fluid Pressure Regulating Valve (VALVE,REGULATING,FLUID PRESSURE) is a valve designed to automatically maintain within close limits a predetermined outlet pressure which may be adjustable within a specified range regardless of the higher fluctuating or constant inlet pressure. It is designed for use with compressed gas(es) and various liquids and may include gauges. It may be inline or cartridge (manifold) design. Excludes REGULATOR, PRESSURE, MEDICAL GAS ADMINISTRATION APPARATUS; REGULATOR, OXYGEN, BAROMETRIC CONTINUOUS FLOW; REGULATOR, OXYGEN DEMAND; REGULATOR, OXYGEN DILUTER DEMAND; and valve(1), fluid pressure regulating, aircraft.
- What is a Fluid Valve Stem? 35 Items
- A Fluid Valve Stem (STEM,FLUID VALVE) is an item usually metallic, threaded or unthreaded, used for securing to or positioning into a mating part. It is designed to be used in a globe, relief, regulator valve and the like as a means of controlling the flow of liquids or gases in a given system. One end may have an integral disk or be designed to accommodate a metallic or nonmetallic disk. The other end is designed for a handwheel, lever, spring, diaphragm and the like for nonpowered operation or to accommodate a gear, solenoid, air motor and the like for powered operation. The handwheel and/or disk may be furnished with the item. Excludes STEM, FAUCET; and STEM, NEEDLE VALVE.
- Parts Kit,Solenoid Valve 52 Items
- What is a Valve Disk? 39 Items
- A Valve Disk (DISK,VALVE) is an item of various shapes (usually circular, conical, cylindrical, or rectangular) used to prevent or regulate the flow of liquids or gases through the valve. May include a retainer, screw, holder, and the like.
- What is a Valve Body? 20 Items
- A Valve Body (BODY,VALVE) is an item designed to enclose and support the internalpart(s) of a valve.
- What is a Linear Hydraulic-Pneumatic Actuator? 31 Items
- A Linear Hydraulic-Pneumatic Actuator (ACTUATOR,HYDRAULIC-PNEUMATIC,LINEAR) is a self-contained power transmitting device designed to convert hydraulic or pneumatic force into controlled mechanical force in the form of linear (straight line) mechanical movement. The linear motion is limited in regards to travel distance. Excludes hydraulic and pneumatic cylinders and screwjacks.
- What is a Rotary Hydraulic-Pneumatic Actuator? 25 Items
- A Rotary Hydraulic-Pneumatic Actuator (ACTUATOR,HYDRAULIC-PNEUMATIC,ROTARY) is a self-contained power transmitting device designed to convert hydraulic or pneumatic force into controlled mechanical force in the form of torque (rotational mechanical movement limited to less than 360 degrees). The linear motion of the hydraulically or pneumatically operated power piston and shaft is converted to rotary motion in the output shaft through such linkage as rack and pinion, pin and yoke, a connecting link, and the like. Excludes hydraulic and pneumatic cylinders and screwjacks.
- What is a Valve Parts Kit? 29 Items
- A Valve Parts Kit (PARTS KIT,VALVE) is do not use if a more specific item name is applicable.
- What is a Linear Actuator Hydraulic-Pneumatic Parts Kit? 14 Items
- A Linear Actuator Hydraulic-Pneumatic Parts Kit (PARTS KIT,HYDRAULIC-PNEUMATIC,LINEAR ACTUATOR) is a parts kit used to repair an ACTUATOR, HYDRAULIC-PNEUMATIC, LINEAR. Excludes PARTS KIT (1), ELECTRO-MECHANICAL LINEAR ACTUATOR; PARTS KIT (1), LINEAR ACTUATING CYLINDER ASSEMBLY.
- What is a Rotary Actuator Hydraulic-Pneumatic Parts Kit? 10 Items
- A Rotary Actuator Hydraulic-Pneumatic Parts Kit (PARTS KIT,HYDRAULIC-PNEUMATIC,ROTARY ACTUATOR) is a parts kit used to repair an ACTUATOR, HYDRAULIC-PNEUMATIC, ROTARY. Excludes PARTS KIT (1), ELECTRO-MECHANICAL ROTARY ACTUATOR.
- What is a Special Shaped Actuator Valve Diaphragm? 15 Items
- A Special Shaped Actuator Valve Diaphragm (DIAPHRAGM,ACTUATOR VALVE,SPECIAL SHAPED) is an item constructed of one or more layers of thin flexible material, either laminated or separated, designed to form a tight seal between the chambers of a valve, and to transmit pressure inducted motion to a valve disk either directly or through a mechanical linkage. The surface of the item must be formed or molded to have a beaded or rolled edge, ribs or any other raised surfaces. The item may contain bolt holes and/or center holes. Excludes DIAPHRA GM, VALVE, FLAT and GASKET.
- What is a Valve Assembly? 19 Items
- A Valve Assembly is an assembly of items consisting of two or more complete valves on a common mounting; mounted on each other; or joined together with fitting(s), hose(s), tube(s), pipe(s), or the like. For items consisting of two or more valves in a common body, See VALVE ASSEMBLY, MANIFOLD.
- What is a Flat Valve Diaphragm? 26 Items
- A Flat Valve Diaphragm (DIAPHRAGM,VALVE,FLAT) is an item in the form of one or more thin flexible sheets normally designed to form a tight seal between chambers of a valve, and to transmit motion to a valve disk either directly or through a mechanical linkage. The surface of the item(s) may not be formed or molded to have a beaded or rolled edge, ribs, or any other raised surfaces. The item may contain bolt holes and/or a center hole. Excludes DIAPHRAGM, VALVE, SPECIAL SHAPED and GASKET.
- What is a Directional Control Linear Valve Slide? 14 Items
- A Directional Control Linear Valve Slide (SLIDE,DIRECTIONAL CONTROL LINEAR VALVE) is an item which may have a cylindrical or other cross-sectional shape, with recess areas on the periphery. It is designed to control the flow direction in a linear directional control valve by the selection of various inlet and outlet ports in a sleeve or the valve body. The slide reciprocates thus mating recess areas with the various ports in the sleeve or valve body. It may have an off (no flow) position.
- What is a Directional Control Linear Valve? 169 Items
- A Directional Control Linear Valve (VALVE,LINEAR,DIRECTIONAL CONTROL) is a manually or power operated valve having three or more ports. The direction of the flow through the various ports is controlled by either one or more reciprocating slide(s) or spool(s) with recess areas which mate with ports in an integral or replaceable ported sleeve, or one or more poppet(s). It is designed to change the direction of fluid flow from one valve port to another. An off (no flow) position is not a flow pattern. The valve is designed to actuate various components of a fluid system. A power operated valve may have a manual override. For items which stop, start, or change the flow of fluid, see: VALVE, SOLENOID. Excludes VALVE, PLUG. See also SERVOVALVE, HYDRAULIC; BODY SECTION, WORKING, LINEAR DIRECTIONAL CONTROL VALVE; and VALVE ASSEMBLY.
Stock Items From Supply Class 4810 Page 1 of 5
- V5011A1049ANDMP953D1107
- RNCC: 5 | RNVC: 2 | DAC: 6
- 741149-ITEM 4
- RNCC: 5 | RNVC: 2 | DAC: 2
- 862623 ITEM 9 8 IN
- RNCC: 5 | RNVC: 2 | DAC: 2
- 100-00946
- RNCC: 3 | RNVC: 2 | DAC: 6
- 86263-4-25
- RNCC: 3 | RNVC: 2 | DAC: 2
- 300-00155
- RNCC: 3 | RNVC: 2 | DAC: 6
- 862623 ITEM 9
- RNCC: D | RNVC: 9 | DAC: 2
- 414-316
- RNCC: 3 | RNVC: 2 | DAC: 4
- 170-0120-01
- RNCC: 3 | RNVC: 2 | DAC: 6
- 32239 REF 41
- RNCC: 5 | RNVC: 9 | DAC: 2
- 57420-5A
- RNCC: 3 | RNVC: 2 | DAC: 6
- 862623 ITEM 13 8 IN
- RNCC: 5 | RNVC: 2 | DAC: 2
- 3SGE-6000 TYPE S/T 24 VDC
- RNCC: 3 | RNVC: 1 | DAC: 4
- 862623 ITEM 3 8 IN
- RNCC: 5 | RNVC: 2 | DAC: 2
- 741329
- RNCC: 3 | RNVC: 2 | DAC: 6
- 861951
- RNCC: 3 | RNVC: 2 | DAC: 4
- 862623 ITEM 7
- RNCC: D | RNVC: 9 | DAC: 2
- NE 729
- RNCC: 3 | RNVC: 2 | DAC: 4
- G1031235072
- RNCC: 3 | RNVC: 2 | DAC: 6
- V5013B1003ANDMP953C1075
- RNCC: 5 | RNVC: 2 | DAC: 6
- DTDAMHN224GAI
- RNCC: 3 | RNVC: 2 | DAC: 4
- 861961
- RNCC: 3 | RNVC: 2 | DAC: 4
- 60043P3
- RNCC: 3 | RNVC: 2 | DAC: 6
- VP514B
- RNCC: 3 | RNVC: 1 | DAC: 6
- 42885
- RNCC: 3 | RNVC: 2 | DAC: 4
- 2-5248-11
- RNCC: 3 | RNVC: 2 | DAC: 6
- PTV59380
- RNCC: 3 | RNVC: 2 | DAC: 4
- CD660109ITEM1A4
- RNCC: 2 | RNVC: 2 | DAC: 6
- 7SC0104
- RNCC: 5 | RNVC: 2 | DAC: 6