Premium Information is available for this item - Upgrade for $1 a day
4730-01-552-3001
Hose Clamp
4730015523001 015523001 SAE-J1508 SAE-J1508 TYPE M SIZE 06 SAE J1508 SAE/J1508-M-06
A clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW. View more Hose Clamp
November 2023
4
Marketplace 4730-01-552-3001
Request a Quotation from participating marketplace vendors
Related Documents 4730-01-552-3001 5+ Documents (More...)
S- 4 C-54-53101 54-53101 J1508E-S-4 SAE J1508 A clamp /fsc-4730/us 4730-01-552-3001 Hose Clamp 4730015523001015523001SAE-J1508
clamp in which the body (band SAE-J1508 S Restrictions 4730-01-552-3001 DEMIL: A | DEMILI : 1 | CRITICALITY
(band SAE-J1508 S- 4 C-54-53101 54-53101 J1508E-S-4 SAE J1508 A clamp https//www.nsnlookup.com /fsg-
-4 SAE J1508 A clamp -4 SAE J1508 A clamp -4 SAE J1508 https//www.nsnlookup.com /fsg-47/fsc-4730/us 4730
J1508E-S-4 SAE J1508 A clamp -53101 SAE J1508E-S-4 SAE J1508 A https//www.nsnlookup.com /fsg-47/fsc-
SAE-J1508 S- 4 C-54-53101 54-53101 J1508E-S-4 SAE J1508 A clamp -13 SAE J1508 A clamp in which (band
SAE-J1508 S- 4 C-54-53101 54-53101 J1508E-S-4 SAE J1508 A clamp -13 SAE J1508 A clamp in which (band
SAE-J1508 S- 4 C-54-53101 54-53101 J1508E-S-4 SAE J1508 A clamp -13 SAE J1508 A clamp in which the body
-53101 SAE J1508E-S-4 SAE J1508 A clamp 54-53101 SAE https//www.nsnlookup.com /fsg-47/fsc-4730/us 4730
-01-552-3001 Hose Clamp 4730015523001 015523001 SAE-J1508 TYPE M SIZE 06 SAE J1508SAE/J1508-M-06 A clamp
Restrictions 4730-01-552-3001
4730-01-552-3001 is a Hose Clamp that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 4730-01-552-3001
- US Air Force (FGGC)
- Effective Date:
- 1 Oct 2008
- US Marine Corps (MC40)
- Effective Date:
- 1 Apr 2012
- US Navy (N9BC)
- Effective Date:
- 1 Jun 2007
- Supplementary Collaborators:
- GTKE
- Germany (ZG01)
- Effective Date:
- 1 Sep 2009
Approved Sources 4730-01-552-3001
- Part Number
- Manufacturer
- Status
- SAE-J1508
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- SAE-J1508 TYPE M SIZE 06
- 0U583 - Sae International (Active)
- Primary Buy
- Primary Buy
- SAE J1508
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- SAE/J1508-M-06
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 4730-01-552-3001
- Characteristic
- Specifications
- FIIG
- Specifications
- A12700
- End Item Identification [AGAV]
- Aircraft
- Fastening Device Type [AXWJ]
- Slotted Hexagon Head Screw
- Material [MATT]
- Steel Corrosion Resisting Overall
- Inside Diameter [AARX]
- 0.440 Inches Minimum And 0.780 Inches Maximum
- Overall Width [ABMK]
- 0.305 Inches Minimum And 0.325 Inches Maximum
- Part Name Assigned By Controlling Agency [CXCY]
- Inavy: Hose Clamp
- Style Designator [STYL]
- Band
Weapon Systems (WSDC) 4730-01-552-3001
DLA Procurement Analysis 4730-01-552-3001
- Last Stock Position:
- 216 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 4730-01-552-3001
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Oct 2022
- Department of the Army (DA)
- EA
- Subscribe
- 1
- EA
- Oct 2021
- US Marine Corps (DM)
- EA
- Subscribe
- 1
- EA
- Oct 2020
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- Apr 2020
- US Marine Corps (DM)
- EA
- Subscribe
- 1
- EA
- Oct 2019
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 2
- Non-Critical Repair Part
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 4730-01-552-3001
Freight Information 4730-01-552-3001
4730-01-552-3001 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 051420. A Sub NMFC of X. It has a NMFC Description of CONDUITS,O/T EARTHEN:PIPE FITTINGS. 4730-01-552-3001 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 29090 which rates the freight between FCL and LCL. 4730-01-552-3001 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 736 for ocean manifesting and military sealift. 4730-01-552-3001 is not classified as a special type of cargo when transported by water. 4730-01-552-3001 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 4730-01-552-3001
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- No Requirement
- Not Applicable
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 4730-01-552-3001 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: