Premium Information is available for this item - Upgrade for $1 a day
4730-01-426-0334
Tube Elbow
4730014260334 014260334 AFP1409T20 R45347-45A-21 AP3043T21 07A258-20 AFP1409-20 4P02216-20 07A258
A fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. View more Tube Elbow
May 2023
7
Marketplace 4730-01-426-0334
Request a Quotation from participating marketplace vendors
Updated Every 15 Minutes 
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 4730-01-426-0334 5+ Documents (More...)
R45347-45A-21 ELBOW,TUBE 1 EA NS Request Quotation Subscribe to View Vendor Details... 07A258-20 ELBOW
4P02216-20 ELBOW,TUBE RQST NS Request Quotation 07A258-20 ELBOW,TUBE RQST NS Request Quotation FedMall
fsc-4730/us 4730-01-348-6236 Tube Elbow 4730013486236 013486236 Subscribe to View Vendor Details... 07A258
-16 ELBOW AP3043T16 ELBOW,TUBE RQST NS Request Quotation 4P02216-16 Request Quotation 07A258 https//www.nsnlookup.com
https//www.nsnlookup.com /fsg-47/fsc-4730/us 4730-01-426-0334 Tube Elbow 4730014260334 014260334 -20
AFP1409-20 4P02216-20 07A258 A fitting that forms an angle of less than 180 degrees (3.141 radians R45347
R45347-45A-16 ELBOW,TUBE 1 EA NS Request Quotation Subscribe to View Vendor Details... 07A258-16 ELBOW
AP3043T16 ELBOW,TUBE RQST NS Request Quotation 4P02216-16 ELBOW,TUBE RQST NS Request Quotation 07A258
AAC4216-06 ELBOW,TUBE RQST NS Request Quotation 07A258-06 ELBOW,TUBE RQST NS Request Quotation 4PHS216
Account Upgrade 4730-01-348-1446Tube Elbow4730013481446 013481446 AP3752T06AAC4216-06R45347-45A-06 07A258
Restrictions 4730-01-426-0334
4730-01-426-0334 is a Tube Elbow that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 4730-01-426-0334
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 4730-01-426-0334
- US Air Force (FXGC)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXAX
Approved Sources 4730-01-426-0334
- Part Number
- Manufacturer
- Status
- AFP1409T20
- Manufacturer
- 30974 - Aerofit, Llc (Active)
- Primary Buy
- Primary Buy
- R45347-45A-21
- 50599 - Parker-Hannifin Corporation (Active)
- Secondary Buy
- Secondary Buy
- AP3043T21
- 01673 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- 07A258-20
- 1W025 - Northrop Grumman Systems Corp (Active)
- Secondary Buy
- Secondary Buy
- AFP1409-20
- 30974 - Aerofit, Llc (Active)
- Secondary Buy
- Secondary Buy
- 4P02216-20
- 06090 - Te Connectivity Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- R45347-45A-21
- 06090 - Te Connectivity Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 4P02216-20
- 0S664 - Advanced Metal Components Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 07A258
- 1W025 - Northrop Grumman Systems Corp (Active)
- Informational Drawing
- Informational Drawing
Datasheet 4730-01-426-0334
- Characteristic
- Specifications
- FIIG
- Specifications
- A080B0
- Material [MATT]
- Titanium Alloy Uns R54520 Overall
- Material Document And Classification [MDCL]
- Ams4928 Assn Std Single Material Response Overall
- Maximum Operating Pressure [CQGM]
- 4000.0 Pounds Per Square Inch Single Response
- Maximum Operating Temp [AEHZ]
- 275.0 Deg Fahrenheit Single Response
- Connection Type [AWLS]
- Unthreaded Internal Tube All Ends
- Connection Style [AHNC]
- Plain (Tube) All Ends
- Nominal Outside Diameter Tube Accommodated [CWFD]
- 1.250 Inches All Ends
- Thread Series Designator [THSD]
- Unjs 1St End Bulkhead
- Nominal Thread Size [CQJX]
- 1.578 Inches 1St End Bulkhead
- Thread Quantity Per Inch [CMLP]
- 14 1St End Bulkhead
- Thread Class [AAJD]
- 3A 1St End Bulkhead
- Tubing Wall Nominal Thickness For Which Designed [CWFK]
- 0.095 Inches All Ends
- Leg Length [AHSJ]
- 3.330 Inches Nominal 1St End
- Leg Length [AHSJ]
- 2.606 Inches Nominal 2Nd End
- Flow Angle [CRFY]
- 45.0 Degrees
- End Item Identification [AGAV]
- B-2 Bomber Acft
DLA Procurement Analysis 4730-01-426-0334
Management Data 4730-01-426-0334
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 4730-01-426-0334
Freight Information 4730-01-426-0334
4730-01-426-0334 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 052190. A Sub NMFC of Z. It has a NMFC Description of PIPE,TUBING,OR PIPE OR TUBING FITTI. 4730-01-426-0334 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 30000 which rates the freight between FCL and LCL. 4730-01-426-0334 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 4730-01-426-0334 is not classified as a special type of cargo when transported by water. 4730-01-426-0334 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 4730-01-426-0334
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- No Requirement
- Not Applicable
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 4730-01-426-0334 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: