Premium Information is available for this item - Upgrade for $1 a day
4730-01-388-7502
Hose Clamp
4730013887502 013887502 5428649 7Z588-9306 B 7Z588-9306 5428649-8 9306
A clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW. View more Hose Clamp
November 2023
8
Marketplace 4730-01-388-7502
Request a Quotation from participating marketplace vendors
Related Documents 4730-01-388-7502 5+ Documents (More...)
Request Quotation Subscribe to View Vendor Details... 7Z588-9306 CLAMP,HOSE 9 EA NS Request Quotation
Hose Clamp 4730013887502 013887502,5428649 54286497Z588-9306 B7Z588-93065428649-89306 A clamp in which
Clamp4730013887502 013887502 5428649 7Z588-9306 B 7Z588-9306 5428649-8 9306 A clamp in which the body
www.nsnlookup.com /fsg-47/fsc-4730/us 4730-01-195-0375 Hose Clamp 4730011950375 011950375,5428649 7Z588-9306
CLAMP,HOSE 7 EA NS Request Quotation 5428649-2 CLAMP,HOSE 7 EA NS Request Quotation 013557-01B0 CLAMP
Hose Clamp 4730013887502 013887502,5428649 Upgrade for $1 a day Upgrade your Account Upgrade 4730
7Z588-9360 B 7Z588-9360 9460 5428649-5 20060 GS60SS 4860SS HS60SS A clamp in which the body (band or
Request Quotation Subscribe to View Vendor Details... 7Z588-9360 CLAMP 1 PG NS Request Quotation 5428649
-3 7Z588-9336 9336 WWD88HS 9436 9D0021-88 7Z588-9356 838930-00 4836SS WW-C-440 5428649 A clamp in which
Hose Clamp 4730013887502 013887502,5428649 7Z588-9306 B 7Z588-9306 5428649-8 9306 A clamp in which
Restrictions 4730-01-388-7502
4730-01-388-7502 is a Hose Clamp that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 4730-01-388-7502
- US Air Force (FXGC)
- Effective Date:
- 1 Apr 2005
- Former MOE Rule:
- FXAX
- US Marine Corps (MC40)
- Effective Date:
- 1 Apr 2005
- Former MOE Rule:
- MC01
- US Navy (N9BC)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GGGT
- Italy (ZR01)
- Effective Date:
- 1 Jul 2013
Approved Sources 4730-01-388-7502
- Part Number
- Manufacturer
- Status
- 7Z588-9306 B
- Manufacturer
- 7Z588 - Norma Pennsylvania Inc. (Active)
- Primary Buy
- Primary Buy
- 7Z588-9306
- 7Z588 - Norma Pennsylvania Inc. (Active)
- Original Design
- Original Design
- 5428649-8
- A9271 - Goriziane Group Spa (Active)
- Secondary Buy
- Secondary Buy
- 5428649-8
- 53711 - Naval Sea Systems Command (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 9306
- 7Z588 - Norma Pennsylvania Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 5428649
- 53711 - Naval Sea Systems Command (Active)
- Related Drawing
- Related Drawing
Datasheet 4730-01-388-7502
- Characteristic
- Specifications
- FIIG
- Specifications
- A12700
- End Item Identification [AGAV]
- Lvt7a1
- Fastening Device Type [AXWJ]
- Slotted Hexagon Head Screw
- Material Document And Classification [MDCL]
- Qq-S-763,Cl 305 Fed Spec Single Material Response Screw
- Material Document And Classification [MDCL]
- Qq-S-766,Cl 302 Cond A Fed Spec Single Material Response Band Or Qq-S-766,Cl 304 Cond A Fed Spec Single Material Response Band Or Qq-S-766,Cl 316 Cond A Fed Spec Single Material Response Band Or Qq-S-766,Cl 321 Cond A Fed Spec Single Material Response Band
- Material [MATT]
- Steel Corrosion Resisting Band
- Material [MATT]
- Steel Corrosion Resisting Screw
- Inside Diameter [AARX]
- 0.438 Inches Minimum And 0.781 Inches Maximum
- Overall Width [ABMK]
- 0.495 Inches Minimum And 0.562 Inches Maximum
- Special Features [FEAT]
- Stainless Steel Liner To Cover Band Serrations On Inside Dia Within Min And Max Size Range
- Style Designator [STYL]
- Band
Weapon Systems (WSDC) 4730-01-388-7502
DLA Procurement Analysis 4730-01-388-7502
- Last Stock Position:
- 950 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 4730-01-388-7502
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Oct 2022
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- Oct 2021
- US Marine Corps (DM)
- EA
- Subscribe
- 1
- EA
- Aug 2021
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- Oct 2020
- US Marine Corps (DM)
- EA
- Subscribe
- 1
- EA
- Feb 2020
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
Similar Supply Items to 4730-01-388-7502
Freight Information 4730-01-388-7502
4730-01-388-7502 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 051420. A Sub NMFC of X. It has a NMFC Description of CONDUITS,O/T EARTHEN:PIPE FITTINGS. 4730-01-388-7502 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 29090 which rates the freight between FCL and LCL. 4730-01-388-7502 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 736 for ocean manifesting and military sealift. 4730-01-388-7502 is not classified as a special type of cargo when transported by water. 4730-01-388-7502 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 4730-01-388-7502
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- No Requirement
- Not Applicable
- MIL-DTL-117, Type III, Class C, Style 1, Medium Duty, Waterproof, Greaseproof, Opaque Bag
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Procurement History 4730-01-388-7502 2 Records
Contracting Technical Data File (CTDF) 4730-01-388-7502 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: