Premium Information is available for this item - Upgrade for $1 a day
4730-01-377-1651
Pipe Cap
4730013771651 013771651 ANSI B16.9 ANSIB16.9(CAP)SCH80,8IN ANSI B16.9L1 ANSIB16.9(CAP)SCH80,8INL1
A pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND. View more Pipe Cap
May 2023
4
Marketplace 4730-01-377-1651
Request a Quotation from participating marketplace vendors
Related Documents 4730-01-377-1651 5+ Documents (More...)
RQST NE Updated Every Day 4730-01-377-1651 RQST Updated Every Day 4730-01-377-1651 RQST NE Related Documents
4730-01-377-1651 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-47/fsc-4730/us 4730-01-377-1651
380-7371 Pipe Cap 4730013807371 013807371,ANSI B16.9 ANSI B16.9L1 A pipe fitting primarily designed for
ANSIB16.9(CAP)SCH80,12IN https//www.nsnlookup.com /fsg-47/fsc-4730/us 4730-01-377-1651 Pipe Cap 4730013771651
380-7371 Pipe Cap 4730013807371 013807371,ANSI B16.9 ANSI B16.9L1 A pipe fitting primarily designed for
ANSIB16.9(CAP)SCH80,12IN https//www.nsnlookup.com /fsg-47/fsc-4730/us 4730-01-377-1651 Pipe Cap 4730013771651
380-7371 Pipe Cap 4730013807371 013807371,ANSI B16.9 ANSI B16.9L1 A pipe fitting primarily designed for
ANSIB16.9(CAP)SCH80,12IN https//www.nsnlookup.com /fsg-47/fsc-4730/us 4730-01-377-1651 Pipe Cap 4730013771651
380-7371 Pipe Cap 4730013807371 013807371,ANSI B16.9 ANSI B16.9L1 A pipe fitting primarily designed for
ANSIB16.9(CAP)SCH80,12IN https//www.nsnlookup.com /fsg-47/fsc-4730/us 4730-01-377-1651 Pipe Cap 4730013771651
Restrictions 4730-01-377-1651
IUID Required
4730-01-377-1651 is a Pipe Cap that is specifically designed to be or selected as being nuclear hard. In addition it has other critical features such as tolerance, fit restrictions or application.Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 4730-01-377-1651
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 4730-01-377-1651
- US Navy (N1H5)
- Effective Date:
- 1 Jul 1993
- Supplementary Collaborators:
- HXJB
- Supplementary Receivers:
- GG
Approved Sources 4730-01-377-1651
- Part Number
- Manufacturer
- Status
- ANSI B16.9
- Manufacturer
- 80204 - American National Standards (Active)
- Incomplete Reference
- Incomplete Reference
- ANSIB16.9(CAP)SCH80,8IN
- 80204 - American National Standards (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- ANSI B16.9L1
- 03950 - Naval Inventory Control Point (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- ANSIB16.9(CAP)SCH80,8INL1
- 03950 - Naval Inventory Control Point (Active)
- Secondary Buy
- Secondary Buy
Datasheet 4730-01-377-1651
- Characteristic
- Specifications
- FIIG
- Specifications
- A208A0
- Criticality Code Justification [CRTL]
- Zzzy
- Material [MATT]
- Steel Overall
- Nominal Pipe Size For Which Designed [ACSU]
- 8.000 Inches
- Material Document And Classification [MDCL]
- Astm A234wpb Assn Std Single Material Response Overall
- Reference Number Differentiating Characteristics [ZZZY]
- Material Controlled Iaw Navsea 0948-Lp-045-7010 Material Control Standard For Level I Items
- Special Features [FEAT]
- Butt Weld-Astm A234 Wpb Sch 80
Management Data 4730-01-377-1651
Navy
- Cognizance:
- 1H
- Consumable material assigned to NAVICP MECH for inventory management
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- L1
- An item that supports either a SUBSAFE or Level 1 system that has undergone the extreme material control and quality assurance techniques that provide objective evidence of its acceptance for its appropriate application. Each item has certification papers (or special markings that provide traceability to the certification) that pedigree its material and physical properties, provide traceability, to manufacturer, contract list and lot, and document the quality assurance system and test requirements applied to the item.
- Issue, Repair, Requisition Restriction Code:
- 00
- No Restriction
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
NATO Stock Numbers Related to 4730-01-377-1651
Freight Information 4730-01-377-1651
4730-01-377-1651 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 052190. A Sub NMFC of Z. It has a NMFC Description of PIPE,TUBING,OR PIPE OR TUBING FITTI. 4730-01-377-1651 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. 4730-01-377-1651 is rated as class 50 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 30000 which rates the freight between FCL and LCL. 4730-01-377-1651 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 4730-01-377-1651 is not classified as a special type of cargo when transported by water. 4730-01-377-1651 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 4730-01-377-1651
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
- Storage Environment
- Unheated General Purpose
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- MIL-PRF-121, Greaseproof, Waterproof Barrier
- ASTM-D4727, Fiberboard used as Pads, Cells, Die-cuts or Sleeves
- --
- ASTM-D5118, Type CF, Class Weather-Resistant, Corrugated Fiberboard Box
- Open for inspection or use only
- MIL-PRF-121, Greaseproof, Waterproof Barrier
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement