Premium Information is available for this item - Upgrade for $1 a day
4730-01-320-1884
Aircraft Structural Component Fitting
4730013201884 013201884 SAE-AS18280 AS1001 AS1001J060404
A fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. View more Tube To Boss Tee
November 2023
19
Marketplace 4730-01-320-1884
Request a Quotation from participating marketplace vendors
Related Documents 4730-01-320-1884 5+ Documents (More...)
AS1001 FITTING,STRUCTURAL COMPONENT,AIRCRAFT 502 EA NS Request Quotation Updated Every Day 4730-01-320
AS1001-101004 TEE 2 EA NS Request Quotation AS1001-101004 TEE 3 EA NS Request Quotation AS1001-101004
AS1001-060604 TEE,TUBE TO BOSS 4 EA NS Request Quotation Subscribe to View Vendor Details...
Quotation AS1001 TEE,TUBE TO BOSS 502 EA NS Request Quotation ER783-060604 TEE,TUBE TO BOSS 62 EA NS
AS1001-101004 TEE 2 EA NS Request Quotation AS1001-101004 TEE 3 EA NS Request Quotation AS1001-101004
-101004 TEE,TUBE TO BOSS 7 EA NS Request Quotation AS1001-101004 TEE 2 EA NS Request Quotation AS1001
3173-8D 110-087-8D LER783-8D APX783-8D ER783-8D AFP409-8D 30024-8D US1175D08 AS1001D100804 AS18280 AS1001
US1175D08 TEE,TUBE TO BOSS 39 EA NS Request Quotation AS1001 TEE,TUBE TO BOSS 502 EA NS Request Quotation
LER-783J040604 TEE,TUBE TO BOSS 35 EA NS Request Quotation AS1001 TEE,TUBE TO BOSS 502 EA NS Request
your Account Upgrade 4730-01-320-1884Aircraft Structural Component Fitting4730013201884 013201884 SAE-AS18280
Restrictions 4730-01-320-1884
4730-01-320-1884 is a Aircraft Structural Component Fitting that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item has been confirmed as a Non-Critical Munitions List Item or a Non-Sensitive Commerce Control List Item and cannnot be in the possession of any party outside of the USA who is a not an authorized NATO Government. Any other possessor of this item should mutilate it now as possession violates international and local laws. This item is a confirmed Commerce Control List Item (CCLI). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 4730-01-320-1884
- US Army (A919)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- A180
- Supplementary Receivers:
- CT
- US Air Force (FXGG)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXCX
- US Navy (N9BG)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- N9GD
- Supplementary Collaborators:
- GTKE
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
Approved Sources 4730-01-320-1884
- Part Number
- Manufacturer
- Status
- SAE-AS18280
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- AS1001J060404
- 0U583 - Sae International (Active)
- Primary Buy
- Primary Buy
- AS1001J060404
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Original Design
- Original Design
- AS1001
- 0U583 - Sae International (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- AS1001J060404
- 0BXR0 - Aerospace Fittings, Inc (Active)
- Secondary Buy
- Secondary Buy
- AS1001J060404
- 66774 - Precision Aircraft Machining (Active)
- Secondary Buy
- Secondary Buy
- AS1001
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- AS1001J060404
- 50808 - United Supply Co Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 4730-01-320-1884
- Characteristic
- Specifications
- FIIG
- Specifications
- A080B0
- Specification/Standard Data [ZZZK]
- 50808-As1001j060404 Manufacturers Standard
Weapon Systems (WSDC) 4730-01-320-1884
DLA Procurement Analysis 4730-01-320-1884
- Last Stock Position:
- 29 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 4730-01-320-1884
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 4730-01-320-1884
Freight Information 4730-01-320-1884
4730-01-320-1884 has freight characteristics managed by Australia.It has a National Motor Freight Classification (NMFC) of 011790. A Sub NMFC of Z. It has a NMFC Description of AIRCRAFT PARTS NOI. 4730-01-320-1884 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 04720 which rates the freight between FCL and LCL. 4730-01-320-1884 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 671 for ocean manifesting and military sealift. 4730-01-320-1884 is not classified as a special type of cargo when transported by water. 4730-01-320-1884 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 4730-01-320-1884
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Electrical Instrument
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 4730-01-320-1884 3 Records
Contracting Technical Data File (CTDF) 4730-01-320-1884 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: