Premium Information is available for this item - Upgrade for $1 a day
4730-01-280-8756
Pipe Tee
4730012808756 012808756 ANSI B16.11 ANSI B16.11L1
A fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings. View more Pipe Tee
May 2023
7
Marketplace 4730-01-280-8756
Request a Quotation from participating marketplace vendors
Related Documents 4730-01-280-8756 5+ Documents (More...)
ANSI B16.11L1 A straight fitting 12 inches (304 mm) long or under having the same or different type
ANSI B16.11L1 A straight fitting 12 inches (304 mm) long or under having the same or different type
ANSI B16.11L1 A straight fitting 12 inches (304 mm) long or under having the same or different type
ANSI B16.11L1 A straight fitting 12 inches (304 mm) long or under having the same or different type
ANSI B16.11L1 A straight fitting 12 inches (304 mm) long or under having the same or different type
ANSI B16.11L1 A straight fitting 12 inches (304 mm) long or under having the same or different type
ANSI B16.11L1 A straight fitting 12 inches (304 mm) long or under having the same or different type
ANSI B16.11L1 A straight fitting 12 inches (304 mm) long or under having the same or different type
ANSI B16.11L1 A straight fitting 12 inches (304 mm) long or under having the same or different type
ANSI B16.11L1 A straight fitting 12 inches (304 mm) long or under having the same or different type
Restrictions 4730-01-280-8756
IUID Required
4730-01-280-8756 is a Pipe Tee that is specifically designed to be or selected as being nuclear hard. In addition it has other critical features such as tolerance, fit restrictions or application.Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 4730-01-280-8756
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 4730-01-280-8756
- US Navy (N1H5)
- Effective Date:
- 1 Apr 1991
- Supplementary Receivers:
- GG
Approved Sources 4730-01-280-8756
- Part Number
- Manufacturer
- Status
- ANSI B16.11
- Manufacturer
- 80204 - American National Standards (Active)
- Incomplete Reference
- Incomplete Reference
- ANSI B16.11L1
- 03950 - Naval Inventory Control Point (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
Datasheet 4730-01-280-8756
- Characteristic
- Specifications
- FIIG
- Specifications
- A080B0
- Connection Style [AHNC]
- Socket (Pipe) All Ends
- Connection Type [AWLS]
- Unthreaded Internal Pipe All Ends
- Criticality Code Justification [CRTL]
- Zzzy
- Flow Angle [CRFY]
- 90.0 Degrees
- Material Document And Classification [MDCL]
- Qq-S-763,Cond A,Cl316l Fed Spec 1St Material Response Overall Or Astm A403,Cl316l Assn Std 2Nd Material Response Overall
- Material [MATT]
- Steel Comp 316L Overall
- Maximum Operating Pressure [CQGM]
- 6000.0 Pounds Per Square Inch Single Response
- Nominal Pipe Size Accommodated [AAAR]
- 0.750 Inches All Ends
- Reference Number Differentiating Characteristics [ZZZY]
- Quality Control In Accordance With Navships 0948-045-7010 Material Identification And Control Instruction For Level 1 Items
Management Data 4730-01-280-8756
Navy
- Cognizance:
- 1H
- Consumable material assigned to NAVICP MECH for inventory management
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- L1
- An item that supports either a SUBSAFE or Level 1 system that has undergone the extreme material control and quality assurance techniques that provide objective evidence of its acceptance for its appropriate application. Each item has certification papers (or special markings that provide traceability to the certification) that pedigree its material and physical properties, provide traceability, to manufacturer, contract list and lot, and document the quality assurance system and test requirements applied to the item.
- Issue, Repair, Requisition Restriction Code:
- 00
- No Restriction
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
NATO Stock Numbers Related to 4730-01-280-8756
Freight Information 4730-01-280-8756
4730-01-280-8756 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 107120. A Sub NMFC of X. It has a NMFC Description of TEES/ZEES NOI I/S. 4730-01-280-8756 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55070 which rates the freight between FCL and LCL. 4730-01-280-8756 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 4730-01-280-8756 is not classified as a special type of cargo when transported by water. 4730-01-280-8756 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 4730-01-280-8756
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
- Storage Environment
- Unheated General Purpose
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 8.0" H x 8.0" W x 8.0" L
- --
- --
- Physical Protection
- Any Suitable Process
- 8.0" H x 8.0" W x 8.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- A-A-1898, Grade II, Water Resistant Cellulosic Cushioning
- --
- ASTM-D5118, Type CF, Class Weather-Resistant, Corrugated Fiberboard Box
- Open for inspection or use only
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement