Premium Information is available for this item - Upgrade for $1 a day
4730-01-184-9408
Tube To Boss Elbow
4730011849408 011849408 SAE-AS1010 AS1010W0810 AS18280 2-01587W0810 2-01587 4H30022
A fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like. View more Tube To Boss Elbow
November 2023
9
Marketplace 4730-01-184-9408
Request a Quotation from participating marketplace vendors
Updated Every 15 Minutes 
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 4730-01-184-9408 5+ Documents (More...)
AS18280 ELBOW,TUBE TO BOSS 142 EA NS Request Quotation Subscribe to View Vendor Details... 2-01587W0810
87 EA NS Request Quotation 2-01587 ELBOW,TUBE TO BOSS 69 EA NS Request Quotation 4H30022 ELBOW,TUBE
LER-837J0806 AS1010J0806 ER-837J0806 AS18280 MIL-F-18280 A fitting that forms an angle of less that
AS18280 ELBOW,TUBE TO BOSS 142 EA NS Request Quotation MIL-F-18280 ELBOW,TUBE TO BOSS 200 EA NS Request
Tube To Boss Elbow 4730011849408 011849408 $1 a day Upgrade your Account Upgrade 4730-01-184-9408Tube
To Boss Elbow4730011849408 011849408 SAE-AS1010 $1 a day Upgrade your Account Upgrade 4730-01-141-8585Tube
LER-837J0806 AS1010J0806 ER-837J0806 AS18280 MIL-F-18280 A fitting that forms an angle of less that
Tube To Boss Elbow 4730011849408 011849408 $1 a day Upgrade your Account Upgrade 4730-01-184-9408Tube
SAE-AS18280 ELBOW,TUBE TO BOSS 107 EA NS Request Quotation SAE AS18280 ELBOW,TUBE TO BOSS RQST NS Request
Quotation AS18280 ELBOW,TUBE TO BOSS 532 EA NS Request Quotation Subscribe to View Vendor Details...
Restrictions 4730-01-184-9408
4730-01-184-9408 is a Tube To Boss Elbow that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 4730-01-184-9408
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 4730-01-184-9408
- US Air Force (FXGC)
- Effective Date:
- 1 Apr 2005
- Former MOE Rule:
- FXAX
Approved Sources 4730-01-184-9408
- Part Number
- Manufacturer
- Status
- SAE-AS1010
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- AS1010W0810
- 0U583 - Sae International (Active)
- Primary Buy
- Primary Buy
- AS1010W0810
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- AS18280
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- AS18280
- 0U583 - Sae International (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 2-01587W0810
- 00624 - Eaton Aeroquip Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 2-01587
- 00624 - Eaton Aeroquip Llc (Active)
- Informational Drawing
- Informational Drawing
- 4H30022
- 98897 - Lockheed Martin Corp (Active)
- Informational Drawing
- Informational Drawing
Datasheet 4730-01-184-9408
- Characteristic
- Specifications
- FIIG
- Specifications
- A080B0
- Connection Style [AHNC]
- Connection Type [AWLS]
- Threaded External Tube 2Nd End Bulkhead
- Connection Type [AWLS]
- Threaded External Tube All Ends
- Flow Angle [CRFY]
- 45.0 Degrees
- Material Document And Classification [MDCL]
- Qq-A-367 Fed Spec Single Material Response Overall
- Material [MATT]
- Aluminum Alloy 7075 Overall
- Media For Which Designed [MEDA]
- Fluid Single Response
- Nominal Outside Diameter Tube Accommodated [CWFD]
- 0.500 Inches 2Nd End
- Nominal Outside Diameter Tube Accommodated [CWFD]
- 0.625 Inches 1St End
- Nominal Thread Size [CQJX]
- 0.750 Inches 2Nd End
- Nominal Thread Size [CQJX]
- 0.750 Inches 2Nd End Bulkhead
- Nominal Thread Size [CQJX]
- 0.875 Inches 1St End
- Leg Length [AHSJ]
- 1.802 Inches Minimum 2Nd End And 1.859 Inches Maximum 2Nd End
- Leg Length [AHSJ]
- 0.805 Inches Minimum 1St End And 1.060 Inches Maximum 1St End
- Seat Angle [CQRB]
- 12.0 Degrees All Ends
- Surface Treatment Document And Classification [STDC]
- Mil-A-8625,Type2,Class 1 Mil Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Anodize Overall
- Thread Class [AAJD]
- 3A 2Nd End Bulkhead
- Thread Class [AAJD]
- 3A All Ends
- Thread Series Designator [THSD]
- Unjf 2Nd End Bulkhead
- Thread Series Designator [THSD]
- Unjf All Ends
Weapon Systems (WSDC) 4730-01-184-9408
DLA Procurement Analysis 4730-01-184-9408
- Last Stock Position:
- 9 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 4730-01-184-9408
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 4730-01-184-9408
Freight Information 4730-01-184-9408
4730-01-184-9408 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 051400. A Sub NMFC of X. It has a NMFC Description of PIPE FITTINGS ALUMINUM. 4730-01-184-9408 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 29700 which rates the freight between FCL and LCL. 4730-01-184-9408 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 4730-01-184-9408 is not classified as a special type of cargo when transported by water. 4730-01-184-9408 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 4730-01-184-9408
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- No Requirement
- Not Applicable
- MIL-DTL-117, Type III, Class C, Style 1, Medium Duty, Waterproof, Greaseproof, Opaque Bag
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Procurement History 4730-01-184-9408 7 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE7M122V7779
- 25 Jul 2022
- Subscribe
- 8
- Subscribe
- Subscribe
- Subscribe
- SPE7M122V5077
- 08 Mar 2022
- Subscribe
- 4
- Subscribe
- Subscribe
- Subscribe
- SPE7M122V2191
- 13 Jan 2022
- Subscribe
- 4
- Subscribe
- Subscribe
- Subscribe
- SPE7M817V1553
- 08 Aug 2017
- Subscribe
- 2
- Subscribe
- Subscribe
- Subscribe
- SPE7M016V9199
- 12 Apr 2016
- Subscribe
- 3
- Subscribe
- Subscribe
- Subscribe
- SPE7M115M7343
- 29 Jul 2015
- Subscribe
- 3
- Subscribe
- Subscribe
- Subscribe
- SPE7M114M6369
- 27 Jun 2014
- Subscribe
- 3
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 4730-01-184-9408 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: