Premium Information is available for this item - Upgrade for $1 a day
4730-01-051-8309
Pipe To Tube Elbow
4730010518309 010518309 SAE-J512 SAE J512 5-6 040202B 5-6 040202B J512 402X5X6
A fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. View more Pipe To Tube Elbow
November 2023
13
Marketplace 4730-01-051-8309
Request a Quotation from participating marketplace vendors
Related Documents 4730-01-051-8309 5+ Documents (More...)
SAE J512 8-6 040102B DX3590AE X05035 MD1917 70908H 34077 SAE J512 8 040110C 48IFHD-8-6 200X8 SAE J512
SAE J512 8 040110C 48IFHD-8-6 200X8 SAE J512 8-6 040102B DX3590AE X05035 MD1917 70908H 34077 SAE J512
8 040110C 48IFHD-8-6 200X8 SAE J512 8-6 040102B DX3590AE X05035 MD1917 70908H 34077 SAE J512 SAE J512
SAE J512 8-6 040102B DX3590AE X05035 MD1917 70908H 34077 SAE J512 8 040110C 48IFHD-8-6 200X8 SAE J512
SAE J512 8 040110C 48IFHD-8-6 200X8 SAE J512 8-6 040102B DX3590AE X05035 MD1917 70908H 34077 SAE J512
241X2 144303 41X2 J512 MS39166-1L 41-F-02 550-1-8 MS39167-1L J512 137401 SAE J512 SAE J512 8 040110C
SAE J512 8-6 040102B DX3590AE X05035 MD1917 70908H 34077 SAE J512 8 040110C 48IFHD-8-6 200X8 SAE J512
SAE J512 8 040110C 48IFHD-8-6 200X8 SAE J512 8-6 040102B DX3590AE X05035 MD1917 70908H 34077 SAE J512
8 040110C 48IFHD-8-6 200X8 SAE J512 8-6 040102B DX3590AE X05035 MD1917 70908H 34077 SAE J512 SAE J512
8 040110C 48IFHD-8-6 200X8 SAE J512 8-6 040102B DX3590AE X05035 MD1917 70908H 34077 SAE J512 SAE J512
Restrictions 4730-01-051-8309
4730-01-051-8309 is a Pipe To Tube Elbow that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 4730-01-051-8309
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 4730-01-051-8309
- US Air Force (FXGC)
- Effective Date:
- 1 Apr 2005
- Former MOE Rule:
- FXAX
- US Navy (N9BC)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GG
- Greece (ZU01)
- Effective Date:
- 1 Jul 1995
Approved Sources 4730-01-051-8309
- Part Number
- Manufacturer
- Status
- SAE-J512
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- SAE J512 5-6 040202B
- 0U583 - Sae International (Active)
- Primary Buy
- Primary Buy
- 5-6 040202B
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Original Design
- Original Design
- 402X5X6
- 01276 - Danfoss Power Solutions Ii, Llc (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- J512
- 0U583 - Sae International (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- J512
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 402X5X6
- 79470 - Dana Corp (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 5-6 040202B
- 0U583 - Sae International (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 4730-01-051-8309
- Characteristic
- Specifications
- FIIG
- Specifications
- A080B0
- Material [MATT]
- Copper Alloy 377 Overall
- Connection Type [AWLS]
- Threaded Internal Tube 1St End
- Connection Type [AWLS]
- Threaded External Pipe 2Nd End
- Connection Style [AHNC]
- Plain (Pipe) 1St End
- Connection Style [AHNC]
- Plain (Pipe) 2Nd End
- Seat Angle [CQRB]
- 42.0 Degrees 1St End
- Nominal Outside Diameter Tube Accommodated [CWFD]
- 0.312 Inches 1St End
- Thread Series Designator [THSD]
- Unf 1St End
- Thread Series Designator [THSD]
- Nptf 2Nd End
- Nominal Thread Size [CQJX]
- 0.500 Inches 1St End
- Nominal Thread Size [CQJX]
- 0.375 Inches 2Nd End
- Thread Class [AAJD]
- 2B 1St End
- Leg Length [AHSJ]
- 0.340 Inches Nominal 1St End
- Leg Length [AHSJ]
- 0.840 Inches Maximum 2Nd End
- Flow Angle [CRFY]
- 90.0 Degrees
- Specification/Standard Data [ZZZK]
- 81343-J512 Professional/Industrial Association Standard
- Nondefinitive Spec/Std Data [ZZZT]
- 6 Figure
DLA Procurement Analysis 4730-01-051-8309
Management Data 4730-01-051-8309
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 4730-01-051-8309
Freight Information 4730-01-051-8309
4730-01-051-8309 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 052185. A Sub NMFC of Z. It has a NMFC Description of PIPE,TUBING,OR PIPE OR TUBING FIT. 4730-01-051-8309 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 29950 which rates the freight between FCL and LCL. 4730-01-051-8309 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 4730-01-051-8309 is not classified as a special type of cargo when transported by water. 4730-01-051-8309 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 4730-01-051-8309
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 5
- 3.0" H x 3.0" W x 1.0" L
- --
- --
- --
- Any Suitable Process
- 3.0" H x 3.0" W x 1.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- --
- --
- --
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Container
Contracting Technical Data File (CTDF) 4730-01-051-8309 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: