Premium Information is available for this item - Upgrade for $1 a day
4730-00-900-0735
Tube To Boss Tee
4730009000735 009000735 SAE-AS4875/1 PA784D201616 AS1032D201616 AS1032 F20784D201616
A fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. View more Tube To Boss Tee
May 2023
10
Marketplace 4730-00-900-0735
Request a Quotation from participating marketplace vendors
Updated Every 15 Minutes 
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 4730-00-900-0735 5+ Documents (More...)
AN784J6 AS1032 Account Upgrade 4730-00-541-1208Tube To Boss Tee4730005411208 005411208 SAE-AS4875/1 AS1032161616
AS1032 AS4875/1 TEE,PIPE TO TUBE TO BOSS 682 EA NS Request Quotation AS1032 TEE,PIPE TO TUBE TO BOSS
Account Upgrade 4730-00-541-1208Tube To Boss Tee4730005411208 005411208 SAE-AS4875/1 AS1032161616 AS1032
006185453 SAE-AS4875/1 AS1032J060606 AN784J6 AS1032 -030303 MS24389-3 AN784-3 AS4875/1 AS1032 A fitting
Upgrade 4730-00-618-5453Tube To Boss Tee4730006185453 006185453 SAE-AS4875/1 AS1032J060606 AN784J6 AS1032
Account Upgrade 4730-00-541-1208Tube To Boss Tee4730005411208 005411208 SAE-AS4875/1 AS1032161616 AS1032
AS1032-040404 AN784-4 AS4875/1AS1032 A fitting having three connections with the branch connection
SAE-AS4875/1 AS1032161616 AS1032AS4875/1 TEE,PIPE TO TUBE TO BOSS 682 EA NS Request Quotation AS1032
Restrictions 4730-00-900-0735
4730-00-900-0735 is a Tube To Boss Tee that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 4730-00-900-0735
- US Air Force (FXGC)
- Effective Date:
- 1 Apr 2005
- Former MOE Rule:
- FXAX
Approved Sources 4730-00-900-0735
- Part Number
- Manufacturer
- Status
- SAE-AS4875/1
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- PA784D201616
- 50948 - Parker Hannifin Corp (Active)
- Primary Buy
- Primary Buy
- AS1032D201616
- 0U583 - Sae International (Active)
- Primary Buy
- Primary Buy
- AS1032D201616
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Original Design
- Original Design
- AS1032
- 0U583 - Sae International (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- AS1032
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- F20784D201616
- 08661 - Brill John G Co (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 4730-00-900-0735
- Characteristic
- Specifications
- FIIG
- Specifications
- A080B0
- Connection Style [AHNC]
- Flared W/ Gasket Seal (Boss) 2Nd End
- Connection Style [AHNC]
- Flared W/ Gasket Seal (Boss) 3Rd End
- Connection Style [AHNC]
- Gasket Seal (Boss) 1St End
- Connection Type [AWLS]
- Threaded External Boss 2Nd End
- Connection Type [AWLS]
- Threaded External Boss 3Rd End
- Connection Type [AWLS]
- Threaded Internal Boss 1St End
- Material Document And Classification [MDCL]
- Qq-S-763 Fed Spec Single Material Response Overall
- Material [MATT]
- Aluminum Alloy 2014 Overall Or Aluminum Alloy 2024 Overall
- Nominal Outside Diameter Tube Accommodated [CWFD]
- 1.000 Inches 3Rd End
- Nominal Outside Diameter Tube Accommodated [CWFD]
- 1.250 Inches 1St End Bulkhead
- Nominal Thread Size [CQJX]
- 1.312 Inches 1St End
- Nominal Thread Size [CQJX]
- 1.312 Inches 3Rd End
- Nominal Thread Size [CQJX]
- 1.625 Inches 2Nd End
- Nominal Thread Size [CQJX]
- 1.625 Inches 2Nd End Bulkhead
- Leg Length [AHSJ]
- 1.742 Inches Nominal 1St End
- Leg Length [AHSJ]
- 2.226 Inches Nominal 3Rd End
- Leg Length [AHSJ]
- 3.054 Inches Nominal 2Nd End
- Specification/Standard Data [ZZZK]
- 81343-As1032 Professional/Industrial Association Standard
- Surface Treatment Document And Classification [STDC]
- Mil-A-8625,Type 2 Mil Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Anodize Overall
- Thread Class [AAJD]
- 3A 2Nd End Bulkhead
- Thread Class [AAJD]
- 3A 3Rd End
- Thread Class [AAJD]
- 3A 1St End
- Thread Class [AAJD]
- 3B 2Nd End
- Thread Series Designator [THSD]
- Un 2Nd End
- Thread Series Designator [THSD]
- Un 2Nd End Bulkhead
- Thread Series Designator [THSD]
- Un 3Rd End
- Thread Series Designator [THSD]
- Un 1St End
- Thread Quantity Per Inch [CMLP]
- 12 1St End
- Thread Quantity Per Inch [CMLP]
- 12 2Nd End
- Thread Quantity Per Inch [CMLP]
- 12 3Rd End
DLA Procurement Analysis 4730-00-900-0735
Management Data 4730-00-900-0735
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 4730-00-900-0735
Freight Information 4730-00-900-0735
4730-00-900-0735 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 052175. A Sub NMFC of Z. It has a NMFC Description of PIPE,TUBING,OR PIPE OR TUBING FIT. 4730-00-900-0735 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 29920 which rates the freight between FCL and LCL. 4730-00-900-0735 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 4730-00-900-0735 is not classified as a special type of cargo when transported by water. 4730-00-900-0735 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 4730-00-900-0735
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- No Requirement
- Not Applicable
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM-D5118, Type CF, Class Domestic, Corrugated Fiberboard Box
Contracting Technical Data File (CTDF) 4730-00-900-0735 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: