Premium Information is available for this item - Upgrade for $1 a day
4730-00-831-1640
Flange To Hose Elbow
4730008311640 008311640 67-190103-11/2 32 67-190103-1 1-2 32L1 SSN660-845-2128655IM696 SSN660-845-2128655IM696L1
A fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s). View more Flange To Hose Elbow
May 2023
21
Marketplace 4730-00-831-1640
Request a Quotation from participating marketplace vendors
Related Documents 4730-00-831-1640 2+ Documents (More...)
Restrictions 4730-00-831-1640
IUID Required
4730-00-831-1640 is a Flange To Hose Elbow that is specifically designed to be or selected as being nuclear hard. In addition it has other critical features such as tolerance, fit restrictions or application.Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 4730-00-831-1640
- US Navy (N1H5)
- Effective Date:
- 1 Apr 1991
- Supplementary Collaborators:
- HX
- Brazil (YA01)
- Effective Date:
- 1 Dec 2001
- Turkey (ZW01)
- Effective Date:
- 1 Nov 1998
Approved Sources 4730-00-831-1640
- Part Number
- Manufacturer
- Status
- 67-190103-11/2 32
- Manufacturer
- 01276 - Danfoss Power Solutions Ii, Llc (Active)
- Incomplete Reference
- Incomplete Reference
- 67-190103-1 1-2 32L1
- 03950 - Naval Inventory Control Point (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- SSN660-845-2128655IM696
- 80064 - Naval Ship Systems Command (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- SSN660-845-2128655IM696L1
- 03950 - Naval Inventory Control Point (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
Datasheet 4730-00-831-1640
- Characteristic
- Specifications
- FIIG
- Specifications
- A080B0
- Bolt Hole Nominal Diameter [CWCQ]
- 0.560 Inches 1St End
- Bolt Hole Quantity [AECS]
- 6 1St End
- Bolt Circle Nominal Diameter [CWCT]
- 3.940 Inches 1St End
- Connection Style [AHNC]
- Gripping Nipple (Nose) 2Nd End
- Connection Type [AWLS]
- Flange 1St End
- Connection Type [AWLS]
- Threaded External Hose 2Nd End
- Criticality Code Justification [CRTL]
- Zzzy
- Furnished Items And Quantity [TMQY]
- 1 Socket
- Flange Face Design [CWDF]
- Raised Swivel 1St End
- Flange Shape [ARKN]
- Round With Holes 1St End
- Flow Angle [CRFY]
- 90.0 Degrees
- Nominal Inside Diameter Hose Accommodated [CWDW]
- 1.812 Inches 2Nd End
- Nominal Outside Diameter Hose Accommodated [CWDZ]
- 2.219 Inches 2Nd End
- Nominal Outside Diameter [CWCD]
- 5.060 Inches 1St End
- Nominal Thickness [CWCK]
- 0.440 Inches 1St End
- Leg Length [AHSJ]
- 3.060 Inches Nominal 1St End
- Leg Length [AHSJ]
- 3.890 Inches Nominal 2Nd End
- Raised Face Nominal Diameter [CWDL]
- 2.740 Inches 1St End
- Raised Face Nominal Height [CWDH]
- 0.015 Inches 1St End
- Reference Number Differentiating Characteristics [ZZZY]
- Quality Control Iaw Navships 0948-045-7010 Material Identification And Control Instruction For Level 1 Items
Management Data 4730-00-831-1640
Navy
- Cognizance:
- 1H
- Consumable material assigned to NAVICP MECH for inventory management
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- L1
- An item that supports either a SUBSAFE or Level 1 system that has undergone the extreme material control and quality assurance techniques that provide objective evidence of its acceptance for its appropriate application. Each item has certification papers (or special markings that provide traceability to the certification) that pedigree its material and physical properties, provide traceability, to manufacturer, contract list and lot, and document the quality assurance system and test requirements applied to the item.
- Issue, Repair, Requisition Restriction Code:
- 00
- No Restriction
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
NATO Stock Numbers Related to 4730-00-831-1640
Freight Information 4730-00-831-1640
4730-00-831-1640 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 052190. A Sub NMFC of Z. It has a NMFC Description of PIPE,TUBING,OR PIPE OR TUBING FITTI. 4730-00-831-1640 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 30000 which rates the freight between FCL and LCL. 4730-00-831-1640 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 4730-00-831-1640 is not classified as a special type of cargo when transported by water. 4730-00-831-1640 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 4730-00-831-1640
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
- Storage Environment
- Unheated General Purpose
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 8.2" H x 8.2" W x 6.5" L
- --
- --
- Physical Protection
- Any Suitable Process
- 8.2" H x 8.2" W x 6.5" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- A-A-1898, Grade II, Water Resistant Cellulosic Cushioning
- 1/4 inch thick
- ASTM-D5118, Type CF, Class Weather-Resistant, Corrugated Fiberboard Box
- Open for inspection or use only
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement