Premium Information is available for this item - Upgrade for $1 a day
4730-00-784-1681
Fluid Passage Bolt
4730007841681 007841681 101486 126719A D9HA-2A-435-AA
A boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE. View more Fluid Passage Bolt
May 2023
18
Marketplace 4730-00-784-1681
Request a Quotation from participating marketplace vendors
Related Documents 4730-00-784-1681 5+ Documents (More...)
Fluid Passage Bolt 4730007841681 007841681 generate, modify, or process electrical signals which
enable JavaScript in your web browser . 2530-21-890-2661Pr Pressure Valve2530218902661 218902661 101486
$1 a day Upgrade your Account Upgrade 5841-00-787-1334Gasket Height Indic5841007871334 007871334 101486
$1 a day Upgrade your Account Upgrade 5841-00-787-1334Gasket Height Indic5841007871334 007871334 101486
a day Upgrade your Account Upgrade 5962-01-123-9616Digital Microcircuit5962011239616 011239616 17-101486
enable JavaScript in your web browser . 2530-21-890-2661Pr Pressure Valve2530218902661 218902661 101486
$1 a day Upgrade your Account Upgrade 5841-00-787-1334Gasket Height Indic5841007871334 007871334 101486
101486 A microcircuit specifically designed to generate, modify, or process electrical signals which
a day Upgrade your Account Upgrade 5962-01-123-9616Digital Microcircuit5962011239616 01123961617-101486
Restrictions 4730-00-784-1681
4730-00-784-1681 is a Fluid Passage Bolt that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 4730-00-784-1681
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 4730-00-784-1681
- US Army (A920)
- Effective Date:
- 1 Apr 2005
- Former MOE Rule:
- A181
- Supplementary Receivers:
- AZBF
- US Air Force (FXGC)
- Effective Date:
- 1 Apr 2005
- Former MOE Rule:
- FXAX
- Spain (YB01)
- Effective Date:
- 1 Sep 2003
- Italy (ZR01)
- Effective Date:
- 1 Dec 2007
- Greece (ZU01)
- Effective Date:
- 1 Jul 1995
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 4730-00-784-1681
- Part Number
- Manufacturer
- Status
- 101486
- Manufacturer
- 73370 - Honeywell International Inc (Active)
- Primary Buy
- Primary Buy
- 126719A
- 1ML14 - Brinkley Technology Group Llc (Active)
- Secondary Buy
- Secondary Buy
- D9HA-2A-435-AA
- 57526 - Ford Motor Company (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- D9HA-2A-435-AA
- 23040 - Ford Motor Co (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 126719A
- 28265 - Hercules Engine Co Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 4730-00-784-1681
- Characteristic
- Specifications
- FIIG
- Specifications
- A121A0
- Distance From First Radial Hole Center To End Of Bolt [BBLB]
- 1.344 Inches Minimum And 1.375 Inches Maximum
- Body Style [AAQL]
- Plain
- Concentric Hole Depth [AAWX]
- 1.125 Inches Minimum And 1.187 Inches Maximum
- Concentric Hole Diameter [AAXC]
- 0.093 Inches Nominal
- First Diameter From Wrenching Feature [BBKL]
- 0.250 Inches Nominal
- First End Connection Type [ACKM]
- Threaded External Tube
- First End Style Designator [ACKN]
- Plain
- First End Nominal Thread Size [CQYM]
- 0.437 Inches
- First End Thread Class [ACLK]
- 2A
- First End Thread Direction [ACLL]
- Right-Hand
- First End Thread Length [ATKZ]
- 1.000 Inches Minimum And 1.062 Inches Maximum
- First End Thread Series Designator [CQMM]
- Unf
- First Radial Fluid Hole Diameter [BBKY]
- 0.093 Inches Nominal
- Material Document And Classification [MDCL]
- Qq-S-633,Fsb1112 Or Fsb1113 Fed Spec Single Material Response
- Material [MATT]
- Steel
- Length From Bearing Surface Of Wrenching Feature To Bolt End [BBLD]
- 1.750 Inches Minimum And 1.781 Inches Maximum
- Length From Bearing Surface Of Wrenching Feature To End Of First Diameter [BBKR]
- 0.719 Inches Minimum And 0.750 Inches Maximum
- Second End Connection Type [ACLS]
- Threaded Internal Pipe
- Second End Nominal Thread Size [CRNB]
- 0.125 Inches
- Second End Style Designator [ACLT]
- Plain
- Second End Thread Direction [ACMS]
- Right-Hand
- Second End Thread Length [ATLF]
- 0.300 Inches Nominal
- Second End Thread Series Designator [CRPF]
- Nptf
- Overall Length [ABHP]
- 2.375 Inches Minimum And 2.437 Inches Maximum
- Width Across Flats [ASDB]
- 0.625 Inches Nominal
- Wrenching Feature Height [BBLF]
- 0.625 Inches Minimum And 0.656 Inches Maximum
- Wrenching Feature Style [BBDF]
- Hexagon
Weapon Systems (WSDC) 4730-00-784-1681
DLA Procurement Analysis 4730-00-784-1681
Management Data 4730-00-784-1681
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 4730-00-784-1681
Freight Information 4730-00-784-1681
4730-00-784-1681 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093480. A Sub NMFC of X. It has a NMFC Description of BOLTS/NUTS METAL SILVER PLATED. 4730-00-784-1681 is rated as class 100 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 4730-00-784-1681 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 4730-00-784-1681 is not classified as a special type of cargo when transported by water. 4730-00-784-1681 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 4730-00-784-1681
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Preservative Coating Only
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- MIL-PRF-21260, Preservative and Break-in Lubricating Oil, Internal Combustion Engine, Grade 10, 30 or 50
- --
- --
- --
- MIL-DTL-117, Type II, Class C, Style 1, Heavy Duty, Waterproof, Greaseproof, Opaque Bag
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM-D5118, Type CF, Class Weather-Resistant, Corrugated Fiberboard Box
Contracting Technical Data File (CTDF) 4730-00-784-1681 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: