4730-00-775-9791

5365-01-531-1300 5365015311300 015311300 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

4730-00-777-2745 4730007772745 007772745 PLUG,PORT

Account Upgrade 4330-99-373-9328Oil Centrifugal Purifier4330993739328 993739328 0196A 76531915500 600-11
DAC 2 76531915500 F0579 - Man Energy Solutions France (Active) Secondary Buy RNCC 5 RNVC 2 DAC 4 600-11

5935-01-271-7507 5935012717507 012717507 is an item specifically designed to be placed around that portion of a connector, receptable, electrical or connector, plug, electrical which contains the facilities for attaching wires or cables.it may be designed to provide the necessary accomodations between an electrical cable clamping device and an electrical connector shell, or it may include the clamping device.it may be used for shielding against electrical interference, mechanical injury, or physical damage due to environmental conditions.

4730-14-550-6841 4730145506841 145506841 is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. the connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. it may have side inlet(s). it is used as a junction at the intersection of a tube or tube fitting.