Premium Information is available for this item - Upgrade for $1 a day
4730-00-684-4707
Fluid Passage Bolt
4730006844707 006844707 SAE-AS18280 ER01324 MS21939-8H4
A boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE. View more Fluid Passage Bolt
May 2023
6



Marketplace 4730-00-684-4707
Request a Quotation from participating marketplace vendors
Related Documents 4730-00-684-4707 5+ Documents (More...)
MS21939-8H4 BOLT,FLUID PASSAGE 285 EA NS Request Quotation ER01324 BOLT,FLUID PASSAGE 45 EA NS Request
MS21939-8H4 BOLT,FLUID PASSAGE 3 EA NS Request Quotation FedMall Updated Every 15 Minutes 4730-00-684
Restrictions Approved Sources Datasheet Management https//www.nsnlookup.com /fsg-47/fsc-4730/us 4730-00-684-4707
Fluid Passage Bolt 4730006844707 006844707 Quotation ER01324 BOLT,FLUID PASSAGE 45 EA NS Request
Fluid Passage Bolt 4730006844707 006844707 Account Upgrade 4730-00-684-4707Fluid Passage Bolt4730006844707
006844707 SAE-AS18280 ER01324 MS21939-8H4 MS21939-8H4 BOLT,FLUID PASSAGE 285 EA NS Request Quotation
ELBOW SAE AS18280 ELBOW,TUBE RQST NS Request Quotation SAE-AS18280 630-5466 Tube Elbow 4730016305466
016305466 /fsg-47/fsc-4730/us 4730 SAE AS18280 ELBOW,TUBE SAE AS18280 -5468 Tube Elbow 4730016305468
ELBOW SAE AS18280 ELBOW,TUBE RQST NS Request Quotation SAE-AS18280 630-5466 Tube Elbow 4730016305466
016305466 /fsg-47/fsc-4730/us 4730 SAE AS18280 ELBOW,TUBE SAE AS18280 -5468 Tube Elbow 4730016305468
Restrictions 4730-00-684-4707
4730-00-684-4707 is a Fluid Passage Bolt that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 4730-00-684-4707
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 4730-00-684-4707
- US Navy (N9BC)
- Effective Date:
- 1 Apr 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- KE
Approved Sources 4730-00-684-4707
- Part Number
- Manufacturer
- Status
- SAE-AS18280
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- MS21939-8H4
- 0U583 - Sae International (Active)
- Primary Buy
- Primary Buy
- MS21939-8H4
- 96906 - Military Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- ER01324
- 14798 - Designed Metal Connections Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- ER01324
- 79470 - Dana Corp Weatherhead Div (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- ER01324
- 01276 - Danfoss Power Solutions Ii, Llc (Active)
- Advisory Reference
- Advisory Reference
Datasheet 4730-00-684-4707
- Characteristic
- Specifications
- FIIG
- Specifications
- A121A0
- Distance From First Radial Hole Center To End Of Bolt [BBLB]
- 1.719 Inches Nominal
- Body Style [AAQL]
- Body Wrenching
- Concentric Hole Diameter [AAXC]
- 0.422 Inches Nominal
- First Diameter From Wrenching Feature [BBKL]
- 0.811 Inches Nominal
- First End Connection Type [ACKM]
- Threaded External Tube
- First End Seat Angle [CQPR]
- 12.0 Degrees Nominal
- First End Style Designator [ACKN]
- Flareless
- First End Nominal Thread Size [CQYM]
- 0.438 Inches
- First End Thread Direction [ACLL]
- Right-Hand
- First End Thread Class [ACLK]
- 3A
- First End Thread Length [ATKZ]
- 0.967 Inches Nominal
- First End Thread Series Designator [CQMM]
- Unjf
- First Radial Fluid Hole Diameter [BBKY]
- 0.422 Inches Nominal
- Fourth Diameter From Wrenching Feature [BBKP]
- 0.364 Inches Nominal
- Material Document And Classification [MDCL]
- Qq-A-225/6,T6,T62 Or T851 Fed Spec Single Material Response
- Material [MATT]
- Aluminum Alloy 2024
- Length From Bearing Surface Of Wrenching Feature To End Of First Diameter [BBKR]
- 0.377 Inches Nominal
- Length From Bearing Surface Of Wrenching Feature To End Of Fourth Diameter [BBKW]
- 1.386 Inches Nominal
- Length From Bearing Surface Of Wrenching Feature To End Of Second Diameter [BBKS]
- 0.826 Inches Nominal
- Length From Bearing Surface Of Wrenching Feature To End Of Third Diameter [BBKT]
- 1.209 Inches Nominal
- Length From Bearing Surface Of Wrenching Feature To Bolt End [BBLD]
- 2.353 Inches Nominal
- Pressure Rating [BGST]
- 3000.0 Pounds Per Square Inch Nominal
- Second Diameter From Wrenching Feature [BBKM]
- 0.740 Inches Nominal
- Second End Connection Type [ACLS]
- Threaded External Tube
- Second End Nominal Thread Size [CRNB]
- 0.750 Inches
- Second End Seat Angle [CRCN]
- 12.0 Degrees Nominal
- Second End Style Designator [ACLT]
- Flareless
- Second End Thread Class [ACMR]
- 3A
- Second End Thread Direction [ACMS]
- Right-Hand
- Second End Thread Length [ATLF]
- 0.460 Inches Nominal
- Second End Thread Series Designator [CRPF]
- Unjf
- Overall Length [ABHP]
- 3.352 Inches Nominal
- Width Across Flats [ASDB]
- 0.996 Inches Minimum And 1.003 Inches Maximum
- Wrenching Feature Height [BBLF]
- 0.437 Inches Nominal
- Wrenching Feature Style [BBDF]
- Hexagon
- Specification/Standard Data [ZZZK]
- 96906-Ms21939 Government Standard
- Surface Treatment Document And Classification [STDC]
- Mil-A-8625,Type 2,Class 1 Mil Spec Single Treatment Response
- Surface Treatment [SFTT]
- Anodize
- Third Diameter From Wrenching Feature [BBKN]
- 0.811 Inches Nominal
DLA Procurement Analysis 4730-00-684-4707
Management Data 4730-00-684-4707
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 4730-00-684-4707
Freight Information 4730-00-684-4707
4730-00-684-4707 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 013280. A Sub NMFC of X. It has a NMFC Description of ALUM BOLTS. 4730-00-684-4707 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 05450 which rates the freight between FCL and LCL. 4730-00-684-4707 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 4730-00-684-4707 is not classified as a special type of cargo when transported by water. 4730-00-684-4707 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 4730-00-684-4707
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- --
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 4730-00-684-4707 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: