Premium Information is available for this item - Upgrade for $1 a day
4730-00-628-7240
Fluid Passage Bolt
4730006287240 006287240 537035-6
A boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE. View more Fluid Passage Bolt
November 2023
29
Marketplace 4730-00-628-7240
Request a Quotation from participating marketplace vendors
Related Documents 4730-00-628-7240 1+ Documents (More...)
(Identification) 1/2 NSN 4730-00-628-7240 (Identification) 2/2 - - 1.
PASSAGE 3 EA NS Request Quotation Updated Every Day 4730-00-628-7240 RQST NE Updated Every Day 4730-
Restrictions 4730-00-628-7240
4730-00-628-7240 is a Fluid Passage Bolt that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 4730-00-628-7240
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 4730-00-628-7240
- US Air Force (FGGC)
- Effective Date:
- 1 Apr 2005
- Former MOE Rule:
- FGAX
- US Navy (N9BC)
- Effective Date:
- 1 Apr 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- GTKE
- Poland (WP01)
- Effective Date:
- 1 Aug 2011
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Aug 2010
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 4730-00-628-7240
- Part Number
- Manufacturer
- Status
- 537035-6
- Manufacturer
- 73030 - Hamilton Sundstrand Corporation (Active)
- Primary Buy
- Primary Buy
- 537035-6
- 05812 - Horst Engineering & Manufacturing Co (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 537035-6
- 06725 - Sps Technologies, Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 537035-6
- 66861 - Hartford Aircraft Products, Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 4730-00-628-7240
- Characteristic
- Specifications
- FIIG
- Specifications
- A121A0
- Distance From First Radial Hole Center To End Of Bolt [BBLB]
- 0.309 Inches Nominal
- Body Style [AAQL]
- Body Wrenching
- Concentric Hole Diameter [AAXC]
- 0.180 Inches Nominal
- First Diameter From Wrenching Feature [BBKL]
- 1.052 Inches Minimum And 1.062 Inches Maximum
- First End Nominal Thread Size [CQYM]
- 0.750 Inches
- First End Thread Direction [ACLL]
- Right-Hand
- First End Thread Class [ACLK]
- 3A
- First End Thread Length [ATKZ]
- 0.710 Inches Nominal
- First End Thread Quantity Per Inch [CQKK]
- 16
- First End Thread Series Designator [CQMM]
- Unf
- First Radial Fluid Hole Diameter [BBKY]
- 0.144 Inches Nominal
- Fourth Diameter From Wrenching Feature [BBKP]
- 0.660 Inches Minimum And 0.662 Inches Maximum
- Material [MATT]
- Steel
- Length From Bearing Surface Of Wrenching Feature To Bolt End [BBLD]
- 5.020 Inches Nominal
- Length From Bearing Surface Of Wrenching Feature To End Of First Diameter [BBKR]
- 0.180 Inches Nominal
- Length From Bearing Surface Of Wrenching Feature To End Of Fourth Diameter [BBKW]
- 4.310 Inches Nominal
- Length From Bearing Surface Of Wrenching Feature To End Of Second Diameter [BBKS]
- 1.680 Inches Nominal
- Length From Bearing Surface Of Wrenching Feature To End Of Third Diameter [BBKT]
- 2.720 Inches Nominal
- Second Diameter From Wrenching Feature [BBKM]
- 0.665 Inches Nominal
- Second End Thread Class [ACMR]
- 3A
- Second End Thread Direction [ACMS]
- Right-Hand
- Second End Thread Length [ATLF]
- 0.615 Inches Nominal
- Second End Thread Series Designator [CRPF]
- Unf
- Second End Thread Quantity Per Inch [CRMX]
- 24
- Second End Nominal Thread Size [CRNB]
- 0.312 Inches
- Overall Length [ABHP]
- 6.170 Inches Minimum And 6.180 Inches Maximum
- Special Features [FEAT]
- Wrenching End Threads Has One Hole 0.078In.Dia Thru
- Width Across Flats [ASDB]
- 0.928 Inches Minimum And 0.940 Inches Maximum
- Wrenching Feature Height [BBLF]
- 0.540 Inches Nominal
- Wrenching Feature Style [BBDF]
- Hexagon
- Surface Treatment Document And Classification [STDC]
- Qq-P-416 Fed Spec Single Treatment Response
- Surface Treatment [SFTT]
- Cadmium
- Third Diameter From Wrenching Feature [BBKN]
- 0.758 Inches Nominal
Weapon Systems (WSDC) 4730-00-628-7240
DLA Procurement Analysis 4730-00-628-7240
- Last Stock Position:
- 2 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 4730-00-628-7240
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- PP
- PROPELLER SYSTEMS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 4730-00-628-7240
Freight Information 4730-00-628-7240
4730-00-628-7240 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 4730-00-628-7240 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 4730-00-628-7240 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 4730-00-628-7240 is not classified as a special type of cargo when transported by water. 4730-00-628-7240 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 4730-00-628-7240
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 8.0" H x -- W x -- L
- --
- --
- Physical Protection
- Any Suitable Process
- 8.0" H x -- W x -- L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- A-A-203, Kraft Wrapping Paper
- No Requirement
- Not Applicable
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- A-A-203, Kraft Wrapping Paper
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Contracting Technical Data File (CTDF) 4730-00-628-7240 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: