Premium Information is available for this item - Upgrade for $1 a day
4730-00-400-7279
Fluid Passage Bolt
4730004007279 004007279 S6110-26027-1
A boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE. View more Fluid Passage Bolt
May 2023
11
Marketplace 4730-00-400-7279
Request a Quotation from participating marketplace vendors
Related Documents 4730-00-400-7279 5+ Documents (More...)
Updated Every Day 4730-00-400-7279 RQST Updated Every Day 4730-00-400-7279 RQST NE Related Documents
S6110-26027-1 BOLT,FLUID PASSAGE 73 EA NS Request Quotation Updated Every Day 4730-00-400-7279 RQST NE
Fluid Passage Bolt 4730004007279 004007279 S6110-26027-001 BOLT,FLUID PASSAGE 26 EA NS Request
S6110-26027-1 BOLT,FLUID PASSAGE 73 EA NS Request Quotation Updated Every Day 4730-00-400-7279 RQST NE
Fluid Passage Bolt 4730004007279 004007279 day Upgrade your Account Upgrade 4730-00-400-7279Fluid
Passage Bolt4730004007279 004007279 S6110-26027-1 S6110-26027-1 BOLT,FLUID PASSAGE 73 EA NS Request
Fluid Passage Bolt 4730004007279 004007279 Updated Every Day 4730-00-400-7279 RQST Updated Every
Day 4730-00-400-7279 RQST NE Related Documents 4730-00-400-7279 5+ Documents ( More... ) https//www.nsnlookup.com
Fluid Passage Bolt 4730004007279 004007279 S6110-26027-001 BOLT,FLUID PASSAGE 26 EA NS Request
S6110-26027-1 BOLT,FLUID PASSAGE 73 EA NS Request Quotation Updated Every Day 4730-00-400-7279 RQST NE
Restrictions 4730-00-400-7279
4730-00-400-7279 is a Fluid Passage Bolt that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 4730-00-400-7279
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 4730-00-400-7279
- US Army (A920)
- Effective Date:
- 1 Apr 2005
- Former MOE Rule:
- A181
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Malaysia (YW01)
- Effective Date:
- 1 Apr 1991
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
- Italy (ZR01)
- Effective Date:
- 1 Jun 1997
Approved Sources 4730-00-400-7279
- Part Number
- Manufacturer
- Status
- S6110-26027-1
- Manufacturer
- 78286 - Sikorsky Aircraft Corporation (Active)
- Primary Buy
- Primary Buy
- S6110-26027-1
- 56453 - Tell Tool Inc (Active)
- Secondary Buy
- Secondary Buy
- S6110-26027-1
- 7Z728 - Triad Precision Components Inc (Active)
- Secondary Buy
- Secondary Buy
Datasheet 4730-00-400-7279
- Characteristic
- Specifications
- FIIG
- Specifications
- A121A0
- Distance From Bolt End To Hole Center [BBKK]
- 0.115 Inches Minimum And 0.135 Inches Maximum
- Distance From First Radial Hole Center To End Of Bolt [BBLB]
- 1.220 Inches Minimum And 1.280 Inches Maximum
- Distance From Second Radial Hole Center To End Of Bolt [BBLC]
- 0.720 Inches Minimum And 0.780 Inches Maximum
- Concentric Hole Depth [AAWX]
- 1.410 Inches Minimum And 1.430 Inches Maximum
- Concentric Hole Diameter [AAXC]
- 0.359 Inches Minimum And 0.391 Inches Maximum
- Cotter Pin Hole Diameter [ADDV]
- 0.060 Inches Minimum And 0.080 Inches Maximum
- First Diameter From Wrenching Feature [BBKL]
- 0.556 Inches Minimum And 0.560 Inches Maximum
- First End Connection Type [ACKM]
- Threaded External Tube
- First End Nominal Thread Size [CQYM]
- 0.562 Inches
- First End Thread Class [ACLK]
- 3A
- First End Thread Direction [ACLL]
- Right-Hand
- First End Thread Length [ATKZ]
- 0.543 Inches Minimum And 0.643 Inches Maximum
- First End Thread Series Designator [CQMM]
- Unf
- First End Style Designator [ACKN]
- Plain
- First Radial Fluid Hole Diameter [BBKY]
- 0.219 Inches Minimum And 0.281 Inches Maximum
- Hardness Rating [CQFM]
- 26.0 Rockwell C Minimum And 33.0 Rockwell C Maximum
- Material Document And Classification [MDCL]
- Mil-S-6758,Cond D Mil Spec Single Material Response
- Minimum Tensile Strength [CQBC]
- 125000 Pounds Per Square Inch
- Material [MATT]
- Steel
- Length From Bearing Surface Of Wrenching Feature To End Of First Diameter [BBKR]
- 0.079 Inches Minimum And 0.114 Inches Maximum
- Length From Bearing Surface Of Wrenching Feature To End Of Second Diameter [BBKS]
- 0.949 Inches Minimum And 0.989 Inches Maximum
- Second Diameter From Wrenching Feature [BBKM]
- 0.490 Inches Minimum And 0.510 Inches Maximum
- Second Radial Fluid Hole Diameter [BBKZ]
- 0.219 Inches Minimum And 0.281 Inches Maximum
- Overall Length [ABHP]
- 1.865 Inches Minimum And 1.885 Inches Maximum
- Width Across Flats [ASDB]
- 0.802 Inches Minimum And 0.822 Inches Maximum
- Wrenching Feature Height [BBLF]
- 0.293 Inches Minimum And 0.333 Inches Maximum
- Wrenching Feature Style [BBDF]
- Hexagon
- Surface Treatment [SFTT]
- Oxide
DLA Procurement Analysis 4730-00-400-7279
Management Data 4730-00-400-7279
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Similar Supply Items to 4730-00-400-7279
Freight Information 4730-00-400-7279
4730-00-400-7279 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 4730-00-400-7279 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 4730-00-400-7279 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 4730-00-400-7279 is not classified as a special type of cargo when transported by water. 4730-00-400-7279 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 4730-00-400-7279
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- No Requirement
- Not Applicable
- MIL-DTL-117, Type III, Class C, Style 1, Medium Duty, Waterproof, Greaseproof, Opaque Bag
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 4730-00-400-7279 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: