Premium Information is available for this item - Upgrade for $1 a day
4730-00-167-2718
Blind Pipe Flange
4730001672718 001672718 1596779G1 1596779
An item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE. View more Blind Pipe Flange
May 2023
9
Marketplace 4730-00-167-2718
Request a Quotation from participating marketplace vendors
Related Documents 4730-00-167-2718 5+ Documents (More...)
Blind Pipe Flange 4730001672718 001672718 Documents 4730-00-167-2718 5+ Documents ( More... ) https
/fsg-31/fsc-3120/au
Restrictions 4730-00-167-2718
4730-00-167-2718 is a Blind Pipe Flange that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 4730-00-167-2718
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 4730-00-167-2718
- National Security Agency (DGX1)
- Effective Date:
- 1 Apr 2005
- Former MOE Rule:
- DAX1
- Supplementary Receivers:
- AX
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
Approved Sources 4730-00-167-2718
- Part Number
- Manufacturer
- Status
- 1596779G1
- Manufacturer
- 10001 - Navair And Navsea Managed (Active)
- Primary Buy
- Primary Buy
- 1596779
- 10001 - Navair And Navsea Managed (Active)
- Informational Drawing
- Informational Drawing
Datasheet 4730-00-167-2718
- Characteristic
- Specifications
- FIIG
- Specifications
- A23300
- Bolt Circle Diameter [ABKG]
- 2.250 Inches Nominal
- Bolt Hole Quantity [AECS]
- 4
- Bolt Hole Diameter [AHNX]
- 0.210 Inches Minimum And 0.218 Inches Maximum
- Face Seating Surface Condition [AKWE]
- Ground
- Flange Diameter [ABKK]
- 3.000 Inches Nominal
- Flange Section Style [AJEM]
- Tongued Face (Blind)
- Material Document And Classification [MDCL]
- Qq-A-325,Alloy 6061 Fed Spec Single Material Response
- Material [MATT]
- Aluminum Alloy
- Raised Face Diameter [AJEE]
- 1.864 Inches Minimum And 1.866 Inches Maximum
- Raised Face Height [AJED]
- 0.720 Inches Minimum And 0.780 Inches Maximum
- Recess Diameter [ABMD]
- 1.350 Inches Minimum And 1.410 Inches Maximum
- Style Designator [STYL]
- Round, One Bolt Hole Circle
- Surface Treatment Document And Classification [STDC]
- Mil-A-8625 Mil Spec Single Treatment Response
- Surface Treatment [SFTT]
- Anodize
- Thickness [ABNM]
- 0.160 Inches Minimum And 0.270 Inches Maximum
DLA Procurement Analysis 4730-00-167-2718
Management Data 4730-00-167-2718
NATO Stock Numbers Related to 4730-00-167-2718
Freight Information 4730-00-167-2718
4730-00-167-2718 has freight characteristics managed by the Office od the Secretary of HEW.It has a National Motor Freight Classification (NMFC) of 051400. A Sub NMFC of X. It has a NMFC Description of PIPE FITTINGS ALUMINUM. 4730-00-167-2718 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 29700 which rates the freight between FCL and LCL. 4730-00-167-2718 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 4730-00-167-2718 is not classified as a special type of cargo when transported by water. 4730-00-167-2718 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 4730-00-167-2718 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: