What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Fueling At Sea Breakable Spool?

A Fueling At Sea Breakable Spool (SPOOL,BREAKABLE,FUELING AT SEA) is a cast iron flanged spool, placed in a fueling hose line, having bolt slots for the easy detaching of bolts, and a machined groove around center of spool to permit easy breaking.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Pipe Bend?

A Return Pipe Bend (BEND,PIPE,RETURN) is a fitting designed to join a pipe in a parallel position to another pipe for reversing the flow of gas, steam, air, or liquids. Excludes BEND, SOIL PIPE.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Soil Pipe Reducer?

A Soil Pipe Reducer (REDUCER,SOIL PIPE) is a straight fitting with the spigot end larger than the hub end. It is used to connect two pieces of soil pipe of different size.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Pipe Lateral?

A Pipe Lateral (LATERAL,PIPE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit pipes and/or pipe fittings to be taken off laterally from the main line. It may have side inlet(s).

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - United States (US)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by United States (US) - NCB is 00 to 09

Page 27 of 608

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by United States

47	30	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - United States (US)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 140 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 1485 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 161 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 43 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 191 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 37 Items
What is a Bulkhead Hose Connector? 442 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 1248 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 1056 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 168 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Fueling At Sea Breakable Spool? 17 Items: A Fueling At Sea Breakable Spool (SPOOL,BREAKABLE,FUELING AT SEA) is a cast iron flanged spool, placed in a fueling hose line, having bolt slots for the easy detaching of bolts, and a machined groove around center of spool to permit easy breaking.
What is a Hose Expansion Ring? 44 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 155 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 146 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 6236 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 824 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 3503 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 5982 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 1491 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 55 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 161 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 2820 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 6011 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 2531 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 57 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 1897 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 12 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 301 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 4053 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2024 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 42 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 1418 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 61 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 183 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1037 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Pipe Bend? 59 Items: A Return Pipe Bend (BEND,PIPE,RETURN) is a fitting designed to join a pipe in a parallel position to another pipe for reversing the flow of gas, steam, air, or liquids. Excludes BEND, SOIL PIPE.
What is a Return Tube Bend? 71 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 67 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 327 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Soil Pipe Reducer? 15 Items: A Soil Pipe Reducer (REDUCER,SOIL PIPE) is a straight fitting with the spigot end larger than the hub end. It is used to connect two pieces of soil pipe of different size.
What is a Pipe Flange? 3798 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 137 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 82 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Pipe Lateral? 135 Items: A Pipe Lateral (LATERAL,PIPE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit pipes and/or pipe fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Tube Lateral? 50 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 412 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 4077 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 110 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 1454 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 19 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 5447 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 71 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Soil Pipe Lateral? 32 Items: A Soil Pipe Lateral (LATERAL,SOIL PIPE) is a fitting having one or two branches which are fixed at various angles other than 90 degrees to the run. If item has two branches, they will be located on opposite sides of the run (180 degrees apart) and will be identical. It may have side inlets.
What is a Soil Pipe Tee? 36 Items: A Soil Pipe Tee (TEE,SOIL PIPE) is a fitting consisting of a run and a branch. The branch may be either curved or straight, but the axis of the end connection intersects the axis of the run at right angles. It may have side inlets.
What is a Tube Coupling Inverted Nut? 269 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 127 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1696 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 51 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 1076 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 435 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Pipe Exhaust Head? 24 Items: A Pipe Exhaust Head (EXHAUST HEAD,PIPE) is a metal device open to the atmosphere located on the outside of a building and connected to the end of a pipeline carrying waste steam, for the purpose of muffling the sound and removing entrained oil and condensation.
What is a Pipe Swing Joint? 91 Items: A Pipe Swing Joint (SWING JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane.
What is a Pipe To Tube Swing Joint? 20 Items: A Pipe To Tube Swing Joint (SWING JOINT,PIPE TO TUBE) is a metallic connector usually angular in shape. It is designed to join a length of tube and/or tube fitting to a length of pipe and/or pipe fitting in a fluid line to permit turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Tube Swing Joint? 87 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 156 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 693 Items
What is a Sediment Strainer? 3870 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
Hose Connection Assembly,Air,Salvage 29 Items
What is a Hose Coupling Assembly? 219 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 455 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 58 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 194 Items
What is a Pipe Repair Clamp? 233 Items: A Pipe Repair Clamp (CLAMP,REPAIR,PIPE) is a one-piece or two-piece metal clamp generally used with gasket(s) and designed to repair longitudinal splits and pit holes and/or to support thin walls in a straight run of pipe. See also CLAMP, LEAK REPAIR, PIPE COUPLING.
What is a Pipe Cap? 784 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 1306 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 45 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 2912 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 4738 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 3129 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
What is a Water Closet Spud? 37 Items: A Water Closet Spud (SPUD,WATER CLOSET) is a short coupling of nonferrous metal flanged at one end and with iron pipe threads extending from the other end to the base of the flange. It is generally used to join a water closet bowl to the flushing water supply and is usually supplied with locknut and washer.
What is an Air Eductor? 80 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 264 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 2740 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2961 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Drain Extension Tube? 47 Items: A Drain Extension Tube (TUBE,EXTENSION,DRAIN) is a fabricated tubular product, extruded on one end, used for lengthening waste or flush tubing from plumbing fixtures.
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Pipe Cross? 296 Items: A Pipe Cross (CROSS,PIPE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is designed to be used as a junction at the intersection of pipe and/or pipe fittings.
What is a Pipe To Tube Cross? 39 Items: A Pipe To Tube Cross (CROSS,PIPE TO TUBE) is a fitting having four branches in the same plane whose axes form right angles. One or more of the connections have standard pipe threads or are unthreaded and designed to accommodate a pipe. The remaining connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It may have side inlet(s).
What is a Tube Cross? 429 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipeline Air Drier And Cooler? 36 Items: A Pipeline Air Drier And Cooler (AIR DRIER AND COOLER,PIPELINE) is a unit designed to be connected into an air line to remove particles of condensed vapor, oil, and sediment and to cool the air. It is composed of an expeller, aftercooler, and drain trap, and operates by means of baffles.
What is a Pipe-Tube Escutcheon? 44 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 71 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 68 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 167 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 123 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Drainage Pipe Tee? 26 Items: A Drainage Pipe Tee (TEE,DRAINAGE PIPE) is a fitting having three connections with the branch connection equidistant and fixed at 90 degrees (1.5705 radians) to the run. It is provided with an internal shoulder(s) at the end(s) of its internally threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow of the pipe and/or pipe fitting contents. It may have side inlet(s).
What is a Drainage Pipe Lateral? 58 Items: A Drainage Pipe Lateral (LATERAL,DRAINAGE PIPE) is a fitting having one or two branches which are fixed at various angles other than 90 degrees (1.5705 radians) to the run. It is used as a junction at the intersection of a drainage line and is provided with a shoulder(s) at the end(s) of its internal threaded or unthreaded portion, conforming to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It may have side inlet(s).
What is a Drainage Pipe Tee-Y? 97 Items: A Drainage Pipe Tee-Y (TEE-Y,DRAINAGE PIPE) is a fitting having one or two branches whose internal and/or external portions form a sweep or radius to the run with the connections fixed at 90 degrees (1.5705 radians) to the run. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and to provide a smooth flow ofthe pipe and/or pipe fitting contents. It may have side inlet(s).
What is a Valve Service Box? 12 Items: A Valve Service Box (SERVICE BOX,VALVE) is a sectional metal pipe whose lower or base section is enlarged to cover an underground valve. The primary purpose is to provide an open shaft which will allow the insertion of the service box valve key.
What is a Hose Clamp? 6579 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 70 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Lubricating Fitting Set? 10 Items: A Lubricating Fitting Set is a collection of various types and sizes of grease type lubrication fittings issued as a set.
What is a Fuel Feeder Manifold? 96 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Soil Pipe Ferrule With Plug? 13 Items: A Soil Pipe Ferrule With Plug (FERRULE WITH PLUG,SOIL PIPE) is an item used in the hubs of soil pipe traps or fittings for sealing and to permit clean out when plug is removed.
What is a Pipe Clamp Coupling? 497 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Protective Lubrication Fitting Cap? 52 Items: A Protective Lubrication Fitting Cap (CAP,LUBRICATION FITTING,PROTECTIVE) is a lubrication fitting designed to fit over another lubrication fitting to prevent the entrance of foreign matter into passageway of the fitting and to protect the fitting from external damage. Excludes CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is an Air Line Manifold? 328 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 459 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Soil Pipe Trap? 18 Items: A Soil Pipe Trap (TRAP,SOIL PIPE) is a device having hub and/or spigot ends. It is used in drain of soil systems to prevent sewer gas from backing up beyond desired point by forming a water seal in the line. This is accomplished by its peculiar shape which is usually in the form of a letter P or S. It may have side inlet and/or cleanout.
What is a Pipeline Flexible Spacer? 252 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is a Tank Nipple? 14 Items: A Tank Nipple (NIPPLE,TANK) is a short length of pipe with standard taper pipe threads on one end. The other end has a standard taper pipe thread running into a recognized standard locknut thread. It is usually fitted with locknut and faced coupling. Excludes NIPPLE (1), PIPE.
What is an Adapter Bushing? 596 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 299 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 309 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 619 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 403 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 1223 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Water Well Strainer? 10 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 148 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 45 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 4136 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 151 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 77 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 503 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 162 Items
What is a Pipe Fitting Assortment? 30 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 110 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 121 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 85 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 37 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 206 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 209 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 5713 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 7769 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 1037 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1649 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is an Emergency Damage Control Pipe Repair Kit? 22 Items: An Emergency Damage Control Pipe Repair Kit (REPAIR KIT,PIPE,EMERGENCY DAMAGE CONTROL) is an assembly of expendable and nonexpendable material and equipment such as fibrous glass cloth, mat(s), tape, rubber gloves, goggles, resin, and the like for making emergency repairs to piping systems.
Parts Kit,Self-Sealing Coupling Half 12 Items
What is a Sediment Strainer Body? 300 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 66 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 822 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 47 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 777 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Magnetic Plug Assortment? 26 Items: A Magnetic Plug Assortment (PLUG ASSORTMENT,MAGNETIC) is an assortment of PLUG, MACHINE THREAD, MAGNETIC and/or PLUG, PIPE, MAGNETIC of various types and/or sizes.
What is a Fluid Flow Restrictor Unit? 821 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is a Slip Joint Pipe Coupling? 43 Items: A Slip Joint Pipe Coupling (COUPLING,PIPE,SLIP JOINT) is a straight fitting having external threads on both ends. Each end is equipped with an internally threaded nut having an unthreaded reduced size opening which contains a gasket and other necessary parts. It is designed to join an unthreaded pipe to another unthreaded pipe in a straight line. It forms a tight fluid seal by the compression slip joint method. It may have a pipe stop.
What is an Air Hose Connector? 143 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
Nozzle,Sand Blast 69 Items
What is an Expanding Tube Repair Plug? 26 Items: An Expanding Tube Repair Plug (PLUG,TUBE REPAIR,EXPANDING) is a sleeve shaped item having a hole through its center and equipped with a machine screw, washer, and nut. Designed to be placed in the end of a tube, sealing the tube by turning the screw causing the sleeve to expand against the walls of the tube and in turn expanding the tube. For tapered tube repair plugs, see PLUG, TUBE REPAIR. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Magnetic Pipe Plug? 226 Items: A Magnetic Pipe Plug (PLUG,PIPE,MAGNETIC) is a pipe fitting primarily designed for installation in a lubrication or hydraulic system. It has an integral magnet in the body and external pipe threads.
What is a Sediment Strainer Head? 22 Items: A Sediment Strainer Head (HEAD,SEDIMENT STRAINER) is a component of a sediment strainer designed to contain the inlet and/or outlet ports of the strainer. It acts as a cover and attaches to the BOWL, SEDIMENT or mounts directly to an integral cavity in an engine, manifold, casing, or the like. The item may include relief, check, and/or by-pass valves, means for supporting the strainer element, and means for mounting the strainer. The item does not include a strainer element. Excludes HEAD, FLUID FILTER.
What is a Hose To Boss Straight Adapter? 890 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 1139 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 4275 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 492 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 405 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Pipe To Boss Elbow? 294 Items: A Pipe To Boss Elbow (ELBOW,PIPE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a pipe or pipe fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like. See also ELBOW, PIPE; and ELBOW, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Boss Elbow? 2092 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 263 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 45 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Pipe To Boss Tee? 52 Items: A Pipe To Boss Tee (TEE,PIPE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a pipe or pipe fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Tube To Boss Tee? 1665 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Cross? 52 Items: A Boss Cross (CROSS,BOSS) is a fitting having four branches in the same plane whose axes form right angles. The boss connections for items such as tanks, housings, valve fittings, and the like, have internal or external machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It may have side inlet(s). Excludes CROSS, TUBE.
What is a Boss Reducer? 999 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 83 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 353 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 238 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 160 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 69 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 934 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 223 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 537 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 389 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 882 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 186 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Cross? 12 Items: A Flange Cross (CROSS,FLANGE) is a fitting having four branches in the same plane whose axes form right angles. The connections have a flange designed to connect with another flange connection or a compression type mounting pad. It may include side inlet(s).
What is a Flange Elbow? 458 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 113 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 561 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Pipe Elbow? 283 Items: A Flange To Pipe Elbow (ELBOW,FLANGE TO PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 752 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 126 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 120 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Boss Tee? 19 Items: A Flange To Boss Tee (TEE,FLANGE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5708 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression mounting pad. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Flange To Hose Tee? 17 Items: A Flange To Hose Tee (TEE,FLANGE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a hose or hose fitting.
What is a Flange To Pipe Tee? 33 Items: A Flange To Pipe Tee (TEE,FLANGE TO PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a pipe or pipe fitting.
What is a Flange To Tube Tee? 83 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Cap? 390 Items: A Quick Disconnect Cap (CAP,QUICK DISCONNECT) is a fluid line fitting having an internal quick disconnect feature, designed to fit over a fitting with an external quick disconnect feature, to block the flow of fluid.
What is a Quick Disconnect Elbow? 80 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 457 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 114 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 70 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Pipe Flange Safety Shield? 53 Items: A Pipe Flange Safety Shield (SHIELD,SAFETY,PIPE FLANGE) is an item specifically designed to fit around a pipe flange joint to confine high pressure spray from a flanged joint leak and prevents uncontrolled spray of fluids that could result in injury to personnel and damage to equipment and materials.
What is a Suction Strainer? 365 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Coupling Swage Ferrule? 362 Items: A Tube Coupling Swage Ferrule (FERRULE,SWAGE,TUBE COUPLING) is a flanged cylindrical metallic item used with a plain end tube and swaged in place. It is designed to be used as a component part of a flexible or rigid tube coupling.
What is a Tube Fitting Insert? 374 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Pipe To Tube To Boss Tee? 20 Items: A Pipe To Tube To Boss Tee (TEE,PIPE TO TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Tube To Gas Fitting Straight Adapter? 50 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 947 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Flange To Tube To Boss Tee? 11 Items: A Flange To Tube To Boss Tee (TEE,FLANGE TO TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection is designed to connect with another flange connection or a compression type mounting pad. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube fitting or is unthreaded and designed to accommodate a tube. The boss connection has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting, tube or tube fitting, and boss or boss fitting.
What is a Tube-Hose Adapter Body? 208 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 352 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 249 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 201 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Flared Tube Fitting Conical Seal? 334 Items: A Flared Tube Fitting Conical Seal (SEAL,CONICAL,FLARED TUBE FITTING) is a cylindrical soft metallic crush item used to seal high pressure flared tube connections. It is designed to be inserted between the conical surface of a flared tube fitting and the inner surface of the flared end of the connecting tube.
What is a Quick-Disconnect Nipple? 164 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 49 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Sound Isolation Insert Set? 28 Items: A Sound Isolation Insert Set (INSERT SET,SOUND ISOLATION) is a multipiece item consisting of a nonmetallic positioning insert, thrust insert with a bonded washer and a metallic backup washer. It is specifically designed for use in a piping system sound isolation coupling flexible connector for the purpose of isolating sound.
What is a Sound Isolation Coupling Assembly? 21 Items: A Sound Isolation Coupling Assembly (COUPLING ASSEMBLY,SOUND ISOLATION) is a multipiece item specifically designed for use in a piping system to form a flexible, sound proof pipe joint. It has a flange connection on one end designed to connect with another flange connection. The other has a flange pad designed to accommodate a companion flange.
What is a Tube To Boss Cross? 51 Items: A Tube To Boss Cross (CROSS,TUBE TO BOSS) is a fitting having four branches in the same plane whose axes form right angles. One or more of the connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. The remaining connections are boss connections. The boss connections have internal or external machine threads and are designed to facilitate a gasket, preformed packing, washer, and the like to form a seal at the boss. It may have side inlet(s).
What is a Quick Disconnect Coupling Assembly Parts Kit? 61 Items: A Quick Disconnect Coupling Assembly Parts Kit (PARTS KIT,QUICK DISCONNECT COUPLING ASSEMBLY) is a parts kit used for replacing the worn and/or damaged parts used in a COUPLING ASSEMBLY, QUICK DISCONNECT. It may include such items as springs, snap rings, o-rings, bearings, and the like.
Parts Kit,Sediment Strainer 35 Items
Parts Kit,Self-Sealing Coupling Assembly 10 Items
Parts Kit,Steam Trap 123 Items
Parts Kit,Swivel Joint 35 Items
What is a Boss Outlet? 128 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 25 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 117 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is a Split Flange Parts Kit? 87 Items: A Split Flange Parts Kit (PARTS KIT,SPLIT FLANGE) is a parts kit used to install and/or repair a FLANGE, PIPE (as modified). It may contain such items as flange halfs, bolts, washers, "o" rings and the like.
What is an Exhaust-Intake Pneumatic Muffler? 68 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 79 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 190 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 44 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 102 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
What is a Hose Clamp Kit? 45 Items: A Hose Clamp Kit (CLAMP KIT,HOSE) is it consists of a roll of a specially perforated band that can be cut to a required length and an adjustable fastener that interlocks to make any diameter required.
Connector,Tubing,Straight 364 Items
What is a Hydraulic Manifold Assembly? 914 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Clamp Kit Fastener? 12 Items: A Clamp Kit Fastener (FASTENER,CLAMP KIT) is an adjustable two end attachable item with housing and screw on one end and serrations on the other end. Used with CLAMP (1), KIT.
What is a Hose Fitting Swaging Socket? 12 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 88 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 54 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
What is a Hose Repair Kit? 48 Items: A Hose Repair Kit (REPAIR KIT,HOSE) is a collection of items which may include MENDER, HOSE; CLAMP (1), HOSE; CLAMP, PLIER; CLAMP (1), SCREW QUICK ADJUSTING; HOSE ADAPTERS; CLAMP PINCERS and the like. It is used for temporary or permanent repair of a hose(s) connection.
Nozzle,Dry Honing 13 Items
Adapter,Check Valve 73 Items
Connector,Suction Pump 13 Items
Handle,Weldment,Double Swivel 16 Items
Tube Connector Assembly,Flowmeter 66 Items
Nipple,Special 105 Items
Nozzle,Line Blind 19 Items
Cap,Retention,Pressure Plug 113 Items
What is an Inseparable Chain Lube Fitting? 10 Items: An Inseparable Chain Lube Fitting (FITTING,CHAIN LUBE,INSEPARABLE) is an item designed to provide lubrication to a drive chain located within a mechanical housing. The body of the fitting is inserted through the housing and is mounted to it by a flange or similar means.
Connector,Pneumatic Starter Duct 11 Items
Adapter Assembly,Filler Cap 77 Items
Steam Trap Element 14 Items
Adapter Assembly,Valve 208 Items
Adapter,Air Shift Chamber Hose 10 Items
Adapter And Flange Assembly 238 Items
Socket Assembly,Hose Flange 23 Items
What is a Tube Coupling Assembly? 254 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 48 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 122 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Tube Fitting Socket Welded Ferrule? 31 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Quick Disconnect Flanged Tee Assembly? 62 Items: A Quick Disconnect Flanged Tee Assembly (TEE ASSEMBLY,FLANGED,QUICK DISCONNECT) is an item having connections with the connections fixed at 90 degrees (1.5708 radians), to the run. The connections are designed to connect with coupling haft, cam-locking type, male/female. The side inlet may or may not be reducer fitting.
What is a Flange To Grooved Clamp Straight Adapter? 27 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 448 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Pipe To Tube Swivel Joint? 23 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Tube Fitting Compression Ferrule? 140 Items: A Tube Fitting Compression Ferrule (FERRULE,COMPRESSION,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be slipped over tubing. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled, the joint seals at the seat in a manner similar to a seat type union.
What is a Pipe Fitting Flared Collar? 26 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 70 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 147 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 492 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 141 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Pipeline Flexible Connection? 79 Items: A Pipeline Flexible Connection (CONNECTION,FLEXIBLE,PIPELINE) is a metallic fitting, with a rubber insert for flexibility and sound isolation. It usually has a flange on one end, and a pipe or pipe coupling on the other end. It may have a filter or filter element assembly.
What is a Fluid Strainer Cover? 64 Items: A Fluid Strainer Cover (COVER,FLUID STRAINER) is an item of various shapes designed as a component of a STRAINER, SEDIMENT, acting as the cover and retaining the strainer element in place. The item does not have an inlet or outlet connection. It is fastened onto the STRAINER BODY, SEDIMENT by means of bolts, clamps, or threaded. For items with inlet and/or outlet connections, see HEAD, FILTER FLUID.
What is a Tube Coupling Nut Ring? 20 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 298 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 1398 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 226 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Quick Disconnect Coupling Half Dog? 14 Items: A Quick Disconnect Coupling Half Dog (DOG,QUICK DISCONNECT COUPLING HALF) is an item used in conjunction with similar items to form a locking mechanism in a quick disconnect coupling half for locking the adapter (nipple) to the nozzle (socket) of a quick disconnect coupling assembly.
What is a Water Feeder Manifold? 12 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.
What is a Hose Fitting Tank Valve Coupling Assembly? 22 Items: A Hose Fitting Tank Valve Coupling Assembly (COUPLING ASSEMBLY,TANK VALVE,HOSE FITTING) is an item having adaptor to tank valve at one end and two or more interchangeable end connections which mate with different hose fitting types. It is used to drain dispensing tanks.

Stock Items From Supply Class 4730 Page 27 of 608

4730-01-473-6072
Pipe To Tube Straight Adapter

014736072
SS-6-TA-7-4-WNF: RNCC: 3 | RNVC: 1
6-FA-4N-316-Z6: RNCC: 5 | RNVC: 1

12 Apr 2000

4730-01-473-6035
Pipe To Tube Straight Adapter

014736035
SS-4-TA-7-6-WNF: RNCC: 3 | RNVC: 1
6-FA-6N-316-Z6: RNCC: 5 | RNVC: 1

12 Apr 2000

4730-01-473-5817
Pipe To Tube Straight Adapter

014735817
SS-4-TA-7-4-WNF: RNCC: 3 | RNVC: 1
4-FA-4N-316-Z6: RNCC: 5 | RNVC: 1

11 Apr 2000

4730-01-473-5230
Pipe To Tube Straight Adapter

014735230
SS-4-TA-1-4-WNF: RNCC: 3 | RNVC: 1
4-MA-4N-316-Z6: RNCC: 5 | RNVC: 1

11 Apr 2000

4730-01-473-4803
Combat Earthm Deployable Tractor

10 Apr 2000

4730-01-473-4460
Pipe To Tube Straight Adapter

014734460
SS-12-TA-7-16-WNF: RNCC: 3 | RNVC: 1
12-FA-16N-316-Z6: RNCC: 5 | RNVC: 1

10 Apr 2000

4730-01-473-4488
Pipe Reducer

014734488
SS-16-HRCG-12: RNCC: 3 | RNVC: 1

10 Apr 2000

4730-01-473-4456
Pipe To Tube Straight Adapter

014734456
SS-12-TA-7-12-WNF: RNCC: 3 | RNVC: 1
12-FA-12N-316-Z6: RNCC: 5 | RNVC: 1

10 Apr 2000

4730-01-473-4431
Pipe Tee

014734431
SS-12-T: RNCC: 3 | RNVC: 2
SS-12-T: RNCC: 5 | RNVC: 9

10 Apr 2000

4730-01-473-4439
Pipe To Tube Straight Adapter

014734439
SS-12-TA-1-12-WNF: RNCC: 3 | RNVC: 1
12-MA-12N-316-WNF: RNCC: 5 | RNVC: 1

10 Apr 2000

4730-01-473-4446
Pipe To Tube Straight Adapter

014734446
SS-12-TA-1-16-WNF: RNCC: 3 | RNVC: 1
12-MA-16N-316-Z6: RNCC: 5 | RNVC: 1

10 Apr 2000

4730-01-473-3669
Tube Elbow

014733669
SS-810-9(COMP): RNCC: 3 | RNVC: 1
8-EE-316: RNCC: 5 | RNVC: 1

6 Apr 2000

4730-01-473-3679
Tube Reducer

014733679
SS-811-PC-6-WNF: RNCC: 3 | RNVC: 1
6-PC-8-316-Z6: RNCC: 5 | RNVC: 1

6 Apr 2000

4730-01-473-3672
Tube Reducer

014733672
SS-811-PC-4-WNF: RNCC: 3 | RNVC: 1
4-PC-8-316-Z6: RNCC: 5 | RNVC: 1

6 Apr 2000

4730-01-473-3632
Tube Nipple

014733632
SS-810-6-8AN: RNCC: 3 | RNVC: 1
8-XASC-10-316: RNCC: 5 | RNVC: 1

6 Apr 2000

4730-01-473-3636
Pipe Nipple

014733636
SS-810-61: RNCC: 3 | RNVC: 1
8-BC-8-316: RNCC: 5 | RNVC: 1

6 Apr 2000

4730-01-473-3536
Hose Clamp

5 Apr 2000

4730-01-473-3319
Tube Reducer

014733319
SS-810-6-4(COMP): RNCC: 3 | RNVC: 1
8-RU-4-316: RNCC: 5 | RNVC: 1

5 Apr 2000

4730-01-473-3294
Pipe To Tube Tee

014733294
SS-810-3TTF: RNCC: 3 | RNVC: 1
8-FBT-6N-316: RNCC: 5 | RNVC: 1

5 Apr 2000

4730-01-473-3326
Tube Reducer

014733326
SS-810-6-6: RNCC: 3 | RNVC: 1
8-RU-6-316: RNCC: 5 | RNVC: 1

5 Apr 2000

4730-01-473-3251
Pipe To Tube Straight Adapter

014733251
6-6-FBU-SS: RNCC: 3 | RNVC: 1

5 Apr 2000

4730-01-473-3233
Pipe To Tube Straight Adapter

014733233
SS-810-1-12-WNF: RNCC: 3 | RNVC: 1
8-MSC-12N-316: RNCC: 5 | RNVC: 1

5 Apr 2000

4730-01-473-3232
Pipe To Tube Straight Adapter

014733232
SS-810-1-12-ORF: RNCC: 3 | RNVC: 1
8-M3SC-12-316: RNCC: 5 | RNVC: 1

5 Apr 2000

4730-01-473-3237
Pipe To Tube Straight Adapter

014733237
SS-810-1-6-OR: RNCC: 3 | RNVC: 1
8-M3SC-6-316: RNCC: 5 | RNVC: 1

5 Apr 2000

4730-01-473-3238
Pipe To Tube Straight Adapter

014733238
SS-810-1-6ST: RNCC: 3 | RNVC: 1
8-M1SC-6-316: RNCC: 5 | RNVC: 1

5 Apr 2000

4730-01-473-3199
Tube Coupling Nut

014733199
1612-1: RNCC: 3 | RNVC: 1
1612-1: RNCC: 3 | RNVC: 1
16-NU-16-316: RNCC: 5 | RNVC: 1

4 Apr 2000

4730-01-473-3198
Tube Coupling Nut

014733198
SS-812-1: RNCC: 3 | RNVC: 1
8-NU-8-316: RNCC: 5 | RNVC: 1

4 Apr 2000

4730-01-473-3195
Pipe Reducer

014733195
SS-810-R-12-WNF: RNCC: 3 | RNVC: 1
12-TUR-8-316-Z6: RNCC: 5 | RNVC: 1

4 Apr 2000

4730-01-473-3197
Pipe To Tube Straight Adapter

014733197
SS-810-1-6(COMP): RNCC: 3 | RNVC: 1
8-MSC-6N-316: RNCC: 5 | RNVC: 1

4 Apr 2000

4730-01-473-3196
Pipe Reducer

014733196
SS-810-R-16-WNF: RNCC: 3 | RNVC: 1
16-TUR-8-316-Z6: RNCC: 5 | RNVC: 1

4 Apr 2000

4730-01-473-3192
Tube Coupling

014733192
SS-810-A-8-ANF: RNCC: 3 | RNVC: 1
8-X6TU-8-316: RNCC: 5 | RNVC: 1

4 Apr 2000

4730-01-473-3189
Tube Coupling

014733189
SS-8-TA-1-8-ANWNF: RNCC: 3 | RNVC: 1
8-XATU-8-316-Z6: RNCC: 5 | RNVC: 1

4 Apr 2000

4730-01-473-3152
Tube Coupling

014733152
SS-8-TA-1-6-ORWNF: RNCC: 3 | RNVC: 1
8-M3TU-6-316-Z6: RNCC: 5 | RNVC: 1

4 Apr 2000

4730-01-473-3104
Tube Coupling

014733104
SS-8-TA-1-4-ANWNF: RNCC: 3 | RNVC: 1
8-XATU-6-316-Z6: RNCC: 5 | RNVC: 1

4 Apr 2000

4730-01-473-3103
Tube Coupling

014733103
SS-8-TA-1-ORWNF: RNCC: 3 | RNVC: 1
8-M2TU-8-316-Z6: RNCC: 5 | RNVC: 1

4 Apr 2000

4730-01-473-2974
Pipe Reducer

014732974
SS-600-R-8-WNF: RNCC: 3 | RNVC: 1
8-TUR-6-316-Z6: RNCC: 5 | RNVC: 1

4 Apr 2000

4730-01-473-2936
Pipe To Tube Straight Adapter

014732936
SS-600-1-8ST: RNCC: 3 | RNVC: 1
6-M1SC-8-316: RNCC: 5 | RNVC: 1

4 Apr 2000

4730-01-473-2929
Pipe To Tube Straight Adapter

014732929
SS-501-PC-4-WNF: RNCC: 3 | RNVC: 1
4-PC-5-316-Z6: RNCC: 5 | RNVC: 1

4 Apr 2000

4730-01-473-2906
Pipe To Tube Straight Adapter

014732906
SS-600-1-2: RNCC: 3 | RNVC: 1
6-MSC-2N-316: RNCC: 5 | RNVC: 1

4 Apr 2000

4730-01-473-2932
Tube Coupling

014732932
SS-6-TA-1-ORWNF: RNCC: 3 | RNVC: 1
6-M2TU-6-316-X6: RNCC: 5 | RNVC: 1

4 Apr 2000

4730-01-473-3078
Tube To Boss Straight Adapter

014733078
SS-810-1-OR(COMP): RNCC: 3 | RNVC: 1
8-M2SC-8-316: RNCC: 5 | RNVC: 1

4 Apr 2000

4730-01-473-3069
Self-Sealing Coupling Assembly

014733069
12467260: RNCC: 1 | RNVC: 2
155506-F5: RNCC: 3 | RNVC: 2

4 Apr 2000

4730-01-473-3041
Tube Reducer

014733041
SS-601-PC-4-WNF: RNCC: 3 | RNVC: 1
4-PC-6-316-Z6: RNCC: 5 | RNVC: 1

4 Apr 2000

4730-01-473-2981
Pipe To Tube Elbow

014732981
SS-600-8-4: RNCC: 3 | RNVC: 1
6-FEL-4N-316: RNCC: 5 | RNVC: 1

4 Apr 2000

4730-01-473-2969
Solder Type Tube Fitting Plug

014732969
SS-600-P: RNCC: 3 | RNVC: 1
6-BLP-6-316: RNCC: 5 | RNVC: 1

4 Apr 2000

4730-01-473-2972
Pipe Reducer

014732972
SS-600-R-12-WNF: RNCC: 3 | RNVC: 1
12-TUR-6-316: RNCC: 5 | RNVC: 1

4 Apr 2000

4730-01-473-2964
Tube Coupling

014732964
SS-600-A-6-ANF: RNCC: 3 | RNVC: 1
6-X6TU-6-316: RNCC: 5 | RNVC: 1

4 Apr 2000

4730-01-473-2971
Tube Reducer

014732971
SS-600-6-4AN: RNCC: 3 | RNVC: 1
4-XASC-6-316: RNCC: 5 | RNVC: 1

4 Apr 2000

4730-01-473-2940
Tube Coupling

014732940
SS-6-TA-1-4-ANWNF: RNCC: 3 | RNVC: 1
4-XATU-6-316-X6: RNCC: 5 | RNVC: 1

4 Apr 2000

4730-01-473-2943
Pipe To Tube Elbow

014732943
SS-600-2-6(COMP): RNCC: 3 | RNVC: 1
6-MSEL-6N-316: RNCC: 5 | RNVC: 1

4 Apr 2000

4730-01-473-2933
Pipe To Tube Straight Adapter

014732933
SS-600-1-8: RNCC: 3 | RNVC: 1
6-MSC-8N-316: RNCC: 5 | RNVC: 1

4 Apr 2000

4730-01-473-2948
Tube Coupling

014732948
SS-6-TA-1-6-ORWNF: RNCC: 3 | RNVC: 1
6-M3TU-6-316-X6: RNCC: 5 | RNVC: 1

4 Apr 2000

4730-01-473-2944
Tube Coupling

014732944
SS-6-TA-1-4-ORWNF: RNCC: 3 | RNVC: 1
6-M3TU-4-316-X6: RNCC: 5 | RNVC: 1

4 Apr 2000

4730-01-473-2935
Tube Coupling

014732935
SS-6-TA-1-2-ORWNF: RNCC: 3 | RNVC: 1
6-M3TU-S-316-X6: RNCC: 5 | RNVC: 1

4 Apr 2000

4730-01-473-2909
Pipe To Tube Straight Adapter

014732909
SS-600-1-4-OR: RNCC: 3 | RNVC: 1
6-M3SC-4-316: RNCC: 5 | RNVC: 1

4 Apr 2000

4730-01-473-2910
Tube To Boss Straight Adapter

014732910
SS-600-1-4ST: RNCC: 3 | RNVC: 1
6-MISC-4-316: RNCC: 5 | RNVC: 1

4 Apr 2000

4730-01-473-2918
Pipe To Tube Straight Adapter

014732918
SS-600-1-6(COMP): RNCC: 3 | RNVC: 1
6-MSC-6N-316: RNCC: 5 | RNVC: 1

4 Apr 2000

4730-01-473-2838
Tube Coupling

014732838
SS-400-6-4-AN: RNCC: 3 | RNVC: 1
4-XASC-4-316: RNCC: 5 | RNVC: 1

3 Apr 2000

4730-01-473-2893
Tube To Boss Straight Adapter

014732893
SS-600-1-OR(COMP): RNCC: 3 | RNVC: 1
6-M2SC-6-316: RNCC: 5 | RNVC: 1

4 Apr 2000

4730-01-473-2807
Tube Coupling

014732807
SS-4-TA-1-ORWNF: RNCC: 3 | RNVC: 1
4-M2TU-6-316-X6: RNCC: 5 | RNVC: 1

3 Apr 2000

4730-01-473-2808
Tube Coupling

014732808
SS-4-TA-1-4-ORWNF: RNCC: 3 | RNVC: 1
4-M3TU-4-316-X6: RNCC: 5 | RNVC: 1

3 Apr 2000

4730-01-473-2812
Tube Coupling

014732812
SS-4-TA-1-6-ORWNF: RNCC: 3 | RNVC: 1
4-M3TU-6-316-X6: RNCC: 5 | RNVC: 1

3 Apr 2000

4730-01-473-2804
Pipe Reducer

014732804
SS-300-R-4-WNF: RNCC: 3 | RNVC: 1
4-TUR-3-316-Z6: RNCC: 5 | RNVC: 1

3 Apr 2000

4730-01-473-2725
Tube Coupling

014732725
SS-2-TA-1-ORWNF: RNCC: 3 | RNVC: 1
2-M2TU-2-316-Z6: RNCC: 5 | RNVC: 1

3 Apr 2000

4730-01-473-2699
Pipe Reducer

014732699
SS-1610-1-12ST: RNCC: 3 | RNVC: 1
16-MISC-12-316: RNCC: 5 | RNVC: 1

3 Apr 2000

4730-01-473-2841
Pipe To Tube Straight Adapter

014732841
SS-400-7-4-OR: RNCC: 3 | RNVC: 1
4-FSC-4N-316: RNCC: 5 | RNVC: 1

3 Apr 2000

4730-01-473-2723
Pipe To Tube Straight Adapter

014732723
SS-1611-PC-12-WNF: RNCC: 3 | RNVC: 1
12-PC-16-316-Z6: RNCC: 5 | RNVC: 1

3 Apr 2000

4730-01-473-2679
Tube Coupling

014732679
SS-1610-A-16ANF: RNCC: 3 | RNVC: 1
16-X16TU-16-316NF: RNCC: 5 | RNVC: 1

3 Apr 2000

4730-01-473-2720
Pipe To Tube Straight Adapter

014732720
SS-1610-7-16: RNCC: 3 | RNVC: 1
16-FSC-316: RNCC: 5 | RNVC: 1

3 Apr 2000

4730-01-473-2722
Pipe To Tube Straight Adapter

014732722
SS-1611-PC-WNF: RNCC: 3 | RNVC: 1
16-PC-316-Z6: RNCC: 5 | RNVC: 1

3 Apr 2000

4730-01-473-2674
Tube Coupling Nut

014732674
SS-1212-1: RNCC: 3 | RNVC: 1
12-NU-12-316: RNCC: 5 | RNVC: 1

3 Apr 2000

4730-01-473-2677
Tube Coupling

014732677
SS-16-TA-1-16-ANWNF: RNCC: 3 | RNVC: 1
16-XATU16-316-Z6: RNCC: 5 | RNVC: 1

3 Apr 2000

4730-01-473-2648
Pipe To Tube Straight Adapter

014732648
SS-1210-1-16: RNCC: 3 | RNVC: 1
12-MSC-16N-316: RNCC: 5 | RNVC: 1

3 Apr 2000

4730-01-473-2643
Tube Reducer

014732643
SS-1210-6-8: RNCC: 3 | RNVC: 1
12-RU-8-316: RNCC: 5 | RNVC: 1

3 Apr 2000

4730-01-473-2669
Pipe To Tube Straight Adapter

014732669
SS-1211-PC-8-WNF: RNCC: 3 | RNVC: 1
8-PC-12-316-Z6: RNCC: 5 | RNVC: 1

3 Apr 2000

4730-01-473-2670
Tube To Boss Straight Adapter

014732670
SS-400-1-4ST(COMP): RNCC: 3 | RNVC: 1
4-MISC-4-316: RNCC: 5 | RNVC: 1

3 Apr 2000

4730-01-473-2666
Pipe To Tube Straight Adapter

014732666
SS-1211-PC-WNF: RNCC: 3 | RNVC: 1
12-PC-12-316-Z6: RNCC: 5 | RNVC: 1

3 Apr 2000

4730-01-473-2644
Pipe To Tube Straight Adapter

014732644
SS-1210-1-OR: RNCC: 3 | RNVC: 1
12-M2SC-12-316: RNCC: 5 | RNVC: 1

3 Apr 2000

4730-01-473-2653
Pipe To Tube Straight Adapter

014732653
SS-1210-1-8ST: RNCC: 3 | RNVC: 1
12-MISC-8-316: RNCC: 5 | RNVC: 1

3 Apr 2000

4730-01-473-2657
Hp Helium Oxygen Ho

014732657
6962070-5: RNCC: 3 | RNVC: 1
3V1006V-06000-006X06000-004-50: RNCC: 5 | RNVC: 2
3V1006V-06000-006X06000-004-50CP: RNCC: 5 | RNVC: 2
6962070-5CP: RNCC: 5 | RNVC: 2
3V1006V-06000-006X06000-004-50: RNCC: 5 | RNVC: 2

3 Apr 2000

4730-01-473-2665
Pipe To Tube Straight Adapter

014732665
SS-1210-1-12(COMP): RNCC: 3 | RNVC: 1
12-MSC-12N-316: RNCC: 5 | RNVC: 1

3 Apr 2000

4730-01-473-2629
Pipe To Tube Elbow

014732629
SS-1610-2-16: RNCC: 3 | RNVC: 1
16-MSEL-16N-316: RNCC: 5 | RNVC: 1

3 Apr 2000

4730-01-473-2617
Pipe To Tube Elbow

014732617
SS-1210-2-12: RNCC: 3 | RNVC: 1
12-MSEL-12N-316: RNCC: 5 | RNVC: 1

3 Apr 2000

4730-01-473-2638
Tube Cross

014732638
SS-1210-4: RNCC: 3 | RNVC: 1
12-ECR-12-316: RNCC: 5 | RNVC: 1

3 Apr 2000

4730-01-473-2137
Tube Fitting Brazing Ferrule

014732137
B-600-SETS-10: RNCC: 3 | RNVC: 1
6-BF-6-B/6-FF-6-B: RNCC: 5 | RNVC: 1

30 Mar 2000

4730-01-473-1252
Pipe Bushing

014731252
MS14304-6T2408: RNCC: 2 | RNVC: 2
MS14304: RNCC: 4 | RNVC: 1
671662-20064: RNCC: 5 | RNVC: 1
ASME-B16.11: RNCC: 5 | RNVC: 1

28 Mar 2000

4730-01-473-1219
Resuscitator Plug

28 Mar 2000

4730-01-472-9535
Tube To Hose Elbow

014729535
AN839-8K: RNCC: 2 | RNVC: 2

22 Mar 2000

4730-01-472-9429
Tube To Boss Tee

014729429
MS51529A12Z: RNCC: 2 | RNVC: 2

22 Mar 2000

4730-01-472-8849
Hose Coupling

21 Mar 2000

4730-01-472-7871
Tube Elbow

014727871
SF1004-4-4: RNCC: 3 | RNVC: 2
1004-4-4SF: RNCC: 5 | RNVC: 2

16 Mar 2000

4730-01-472-7452
Positionable Elbow

014727452
7245940: RNCC: 3 | RNVC: 1
99-1536: RNCC: 5 | RNVC: 1
SS-8-VCO-9P-8ST: RNCC: 5 | RNVC: 2
7245940 NO.40: RNCC: 5 | RNVC: 2

15 Mar 2000

4730-01-472-7281
Sediment Strainer Element

014727281
081-5100: RNCC: 3 | RNVC: 2

14 Mar 2000

4730-01-472-7265
Hydraulic Swivel Joint

014727265
082-7763: RNCC: 3 | RNVC: 2

14 Mar 2000

4730-01-472-7258
Fluid Flow Restrictor

014727258
69080-1: RNCC: 3 | RNVC: 2

14 Mar 2000

4730-01-472-7143
90 Degree Elbow

014727143
5793637-61: RNCC: 3 | RNVC: 1
6390675 FIND 26: RNCC: 5 | RNVC: 1
5793637-61D4: RNCC: 5 | RNVC: 2
6390675 FIND 26D4: RNCC: 5 | RNVC: 2

14 Mar 2000

4730-01-472-6920
Pipe Tee

014726920
16-16-16 140438C: RNCC: 3 | RNVC: 2
J514: RNCC: 5 | RNVC: 1

13 Mar 2000

4730-01-472-6044
Tube Elbow

014726044
68715: RNCC: 3 | RNVC: 2
99-0685: RNCC: 5 | RNVC: 1

9 Mar 2000

4730-01-472-5690
Special-Shaped Hose Clamp

8 Mar 2000

4730-01-472-5635
Tube Coupling

014725635
HS4517-4D: RNCC: 3 | RNVC: 2
HS4517: RNCC: 3 | RNVC: 9
AP10100D04: RNCC: 5 | RNVC: 2
HS4517-4D: RNCC: 5 | RNVC: 9
HS4517-4D: RNCC: 5 | RNVC: 9

8 Mar 2000

4730-01-472-4218
Tube 100 Dgr Elbow

014724218
6393734-1: RNCC: 3 | RNVC: 1
6393734-1D4: RNCC: 5 | RNVC: 2

2 Mar 2000

4730-01-472-4246
Sw Elbow

014724246
5793637-75: RNCC: 3 | RNVC: 1
6390675 FIND 17: RNCC: 5 | RNVC: 1
6394157 FIND 007: RNCC: 5 | RNVC: 1
6394866 FIND 002: RNCC: 5 | RNVC: 1
6395359 FIND 002: RNCC: 5 | RNVC: 1
5793637-75D4: RNCC: 5 | RNVC: 2
6390675 FIND 17D4: RNCC: 5 | RNVC: 2
6394866 FIND 002D4: RNCC: 5 | RNVC: 2
6395359 FIND 002D4: RNCC: 5 | RNVC: 2
6394157 FIND 007D4: RNCC: 5 | RNVC: 2

2 Mar 2000

4730-01-472-2198
Fluid Orifice Plate

014722198
3352511-11: RNCC: 3 | RNVC: 2

23 Feb 2000

4730-01-472-0726
Tube To Boss Straight Adapter

014720726
NY-400-1-4ST: RNCC: 3 | RNVC: 2

17 Feb 2000

4730-01-472-0384
Fitting

014720384
395063: RNCC: 3 | RNVC: 2

17 Feb 2000

4730-01-471-9055
Fitting Adapter

014719055
901-036-503-107: RNCC: 3 | RNVC: 2

17 Feb 2000

4730-01-471-6608
Tube Union

014716608
26-84007-001: RNCC: 3 | RNVC: 2

9 Feb 2000

4730-01-471-6340
Pipe Reducer

014716340
27-62049-059: RNCC: 3 | RNVC: 2

8 Feb 2000

4730-01-471-5405
Hyd Fitting Adapter

014715405
27-52016-001: RNCC: 3 | RNVC: 2

4 Feb 2000

4730-01-471-5010
Special-Shaped Hose Clamp

014715010
1401339: RNCC: 3 | RNVC: 2

3 Feb 2000

4730-01-471-3796
Sediment Strainer

014713796
19-030-513-00-501: RNCC: 3 | RNVC: 1

1 Feb 2000

4730-01-471-3784
Sediment Strainer

014713784
19-660-242-00-501: RNCC: 3 | RNVC: 1

1 Feb 2000

4730-01-471-3451
Fluid Flow Restrictor

014713451
P401-050-291: RNCC: 3 | RNVC: 2

31 Jan 2000

4730-01-471-2892
Flange To Hose Straight Adapter

014712892
27-64028-001: RNCC: 3 | RNVC: 2

28 Jan 2000

4730-01-470-9155
Boss Elbow

14 Jan 2000

4730-01-470-6979
Tube Tee

014706979
7765: RNCC: 3 | RNVC: 2
7765: RNCC: 3 | RNVC: 9
NW32343: RNCC: 5 | RNVC: 2
112-10036: RNCC: D | RNVC: 9

6 Jan 2000

4730-01-470-5577
Fluid Passage Bolt

23 Dec 1999

4730-01-470-4580
Garden Hose Nozzle

014704580
439C: RNCC: 3 | RNVC: 1

20 Dec 1999

4730-01-470-4235
Threaded Tube Fitting Plug

20 Dec 1999

4730-01-470-3833
Hose Coupling Assembly

014703833
N78C 9 4KHO7 0: RNCC: 3 | RNVC: 1

16 Dec 1999

4730-01-470-3222
Slip Joint Pipe Coupling

15 Dec 1999

4730-01-470-3088
Hydraulic Manifold Assembly

15 Dec 1999

4730-01-470-2051
Aircraft Tube Cap

014702051
MS21914-8F: RNCC: 2 | RNVC: 2

10 Dec 1999

4730-01-470-1680
Tube Elbow

014701680
7M1127T6: RNCC: 3 | RNVC: 2
L51043T06: RNCC: 3 | RNVC: 2

9 Dec 1999

4730-01-470-1475
Tube Fitting Locknut

014701475
39198: RNCC: 3 | RNVC: 2
A-1227-J-972: RNCC: 5 | RNVC: 2

9 Dec 1999

4730-01-470-1292
Union Tailpiece

014701292
820-13859901.00IPSCRESCL304/3-: RNCC: 3 | RNVC: 1
6000#BUTTWELDSCHEDULE40TAILPIECE: RNCC: 5 | RNVC: 1
215-4497905PC327: RNCC: 5 | RNVC: 1
820-13859901.00IPSCRESCL304/316,: RNCC: 5 | RNVC: 1

8 Dec 1999

4730-01-470-1350
Union Tailpiece

8 Dec 1999

4730-01-469-9937
Aircraft A Tube Cap

014699937
MS21914-6F: RNCC: 2 | RNVC: 2

3 Dec 1999

4730-01-469-9936
Aircraft A Tube Cap

014699936
MS21914-4F: RNCC: 2 | RNVC: 2

3 Dec 1999

4730-01-469-9938
Aircraft A Tube Cap

014699938
MS21914-10F: RNCC: 2 | RNVC: 2

3 Dec 1999

4730-01-469-9934
Aircraft A Tube Cap

014699934
MS21914-16F: RNCC: 2 | RNVC: 2

3 Dec 1999

4730-01-469-9932
Aircradt A Tube Cap

014699932
MS21914-12F: RNCC: 2 | RNVC: 2

3 Dec 1999

4730-01-469-8741
Whip Hose

014698741
6Y835: RNCC: 3 | RNVC: 2

29 Nov 1999

4730-01-469-5051
Tube Tee

014695051
L50054T060610: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-5123
Tube Tee

014695123
L51096T060406: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-5113
Tube Tee

014695113
L53043T06: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-5108
Tube Tee

014695108
L52003T04: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-5117
Tube Tee

014695117
L51096T040604: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-5109
Tube Tee

014695109
L51053T1008: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-5104
Tube Elbow

014695104
L51053T0608: RNCC: 3 | RNVC: 2
7M1123T0608: RNCC: 5 | RNVC: 2

15 Nov 1999

4730-01-469-5098
Tube Tee

014695098
L51044T04: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-5103
Tube Tee

014695103
L51094T060604: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-5089
Tube Tee

014695089
L51051T1008: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-5096
Tube Tee

014695096
L51093T1008: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-5099
Tube Tee

014695099
L51094T060404: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-5092
Tube Tee

014695092
L51043T08: RNCC: 3 | RNVC: 2
7M1127T8: RNCC: 5 | RNVC: 2

15 Nov 1999

4730-01-469-5088
Tube Tee

014695088
L51051T0806: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-5087
Tube Tee

014695087
L51003T08: RNCC: 3 | RNVC: 2
7M1122T8: RNCC: 5 | RNVC: 2

15 Nov 1999

4730-01-469-5085
Tube Elbow

014695085
L51042T06: RNCC: 3 | RNVC: 2
7M1128T6: RNCC: 5 | RNVC: 2

15 Nov 1999

4730-01-469-5076
Tube Tee

014695076
L51026T08: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-5081
Tube Tee

014695081
L51023T08: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-5080
Tube Tee

014695080
L50054T121206: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-5075
Tube Tee

014695075
L51002T08: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-5057
Tube Tee

014695057
L50054T081012: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-5072
Tube Tee

014695072
L51004T08: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-5070
Tube Tee

014695070
L51001T08: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-5071
Tube Tee

014695071
L50054T080806: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-5056
Tube Tee

014695056
L50054T100810: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-5065
Tube Tee

014695065
L51001T06: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-5066
Tube Tee

014695066
L50054T080804: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-5063
Tube Tee

014695063
L51001T04: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-5062
Tube Tee

014695062
L50054T120610: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-5050
Tube Tee

014695050
L50054T060604: RNCC: 3 | RNVC: 2
7M1130T060604: RNCC: 5 | RNVC: 2

15 Nov 1999

4730-01-469-3622
Rynglok Union Assy

014693622
R51082T081010: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-3657
Tube Tee

014693657
R81151T1208: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-3680
Tube Tee

014693680
R81287T041212: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-3632
Tube Tee

014693632
R51287T041212: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-3594
Tube Tee

014693594
R81153T0403: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-3599
Tube Tee

014693599
R51287T061212: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-3613
Tube Tee

014693613
R51056T101004: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-3606
Tube Tee

014693606
R51051T0604: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-3598
Tube Tee

014693598
R51051T0403: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-3589
Tube Tee

014693589
R51091T0403: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-3582
Tube Tee

014693582
R51056T101006: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-3581
Tube Tee

014693581
R50241T12: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-3576
Tube Tee

014693576
R51051T1210: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-3549
Tube Tee

014693549
R51094T060604: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-3567
Tube Tee

014693567
R51041T03: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-3575
Tube Tee

014693575
R50054T101008: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-3566
Tube Tee

014693566
R50004T10: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-3572
Tube Tee

014693572
R50004T12: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-3564
Tube Tee

014693564
R51001T03: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-3555
Tube Tee

014693555
R50279T101004: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-3558
Tube Elbow

014693558
R80103T06: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-3559
Tube Tee

014693559
R50002T12: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-3550
Tube Tee

014693550
R50001T16: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-3544
Tube Tee

014693544
R51094T040604: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-3541
Tube Tee

014693541
R51074T081010: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-3524
Tube Tee

014693524
R51043T10: RNCC: 3 | RNVC: 2
7M1127T10: RNCC: 5 | RNVC: 2

15 Nov 1999

4730-01-469-3530
Tube Tee

014693530
R51074T041212: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-3529
Tube Tee

014693529
R51053T0403: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-3521
Tube Tee

014693521
R51043T03: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-3515
Tube Tee

014693515
R50054T101006: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-3518
Tube Tee

014693518
R51003T03: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-469-3516
Tube Tee

014693516
R51001T12: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-01-468-7487
Pipe Plug

014687487
4-900598-6: RNCC: 3 | RNVC: 1

20 Oct 1999

4730-01-468-6489
Tube Reducer

014686489
AJ12-8U: RNCC: 3 | RNVC: 2

18 Oct 1999

4730-01-468-6490
Pipe To Tube Straight Adapter

014686490
AJ12-16GC: RNCC: 3 | RNVC: 2

18 Oct 1999

4730-01-468-6488
Tube Union

014686488
AJ12U: RNCC: 3 | RNVC: 2

18 Oct 1999

4730-01-468-6312
Sediment Strainer Element

014686312
12463060: RNCC: 3 | RNVC: 2

18 Oct 1999

4730-01-468-4918
Cable Trans Adapter

014684918
4114359: RNCC: 3 | RNVC: 2

13 Oct 1999

4730-01-468-4734
Adapter Bushing

014684734
492024: RNCC: 3 | RNVC: 9

12 Oct 1999

4730-01-468-4674
Pressure Ga Adapter

014684674
4114234: RNCC: 3 | RNVC: 2

12 Oct 1999

4730-01-468-4635

12 Oct 1999

4730-01-468-4551
Absorber Dust Cap

014684551
4114094: RNCC: 3 | RNVC: 2

12 Oct 1999

4730-01-468-4465
Orc Asm-Nmmy

014684465
4114277-001: RNCC: 3 | RNVC: 2

12 Oct 1999

4730-01-468-4484
Failsafe Block

014684484
4114031: RNCC: 3 | RNVC: 2

12 Oct 1999

4730-01-468-4392
Hydraulic Manifold Assembly

014684392
887751: RNCC: 3 | RNVC: 2

8 Oct 1999

4730-01-468-3370
Quick Disconnect Coupling Half

6 Oct 1999

4730-01-468-3073
Pipe Union

014683073
90C01-5162: RNCC: 3 | RNVC: 1
6MD23-154IT51: RNCC: 5 | RNVC: 1

5 Oct 1999

4730-01-468-2625
Moisture Trap

014682625
4250C: RNCC: 3 | RNVC: 2
98-1471: RNCC: 5 | RNVC: 1

4 Oct 1999

4730-01-468-2057
Quick Disconnect Coupling Half

014682057
2KIL-F720: RNCC: 3 | RNVC: 2

1 Oct 1999

4730-01-468-1145
Tube Elbow

29 Sep 1999

4730-01-468-0972
Hose Clamp

014680972
TR30E-62-225-Z: RNCC: 3 | RNVC: 2

28 Sep 1999

4730-01-468-0798
Hose Clamp

28 Sep 1999

4730-01-468-0718
Fluid Flow Restrictor

014680718
P401-050-200: RNCC: 3 | RNVC: 2

27 Sep 1999

4730-01-467-9382
Pipe Plug

21 Sep 1999

4730-01-467-7832
Union Tailpiece

014677832
104T-5: RNCC: 3 | RNVC: 1
610-5910956PC19: RNCC: 5 | RNVC: 1

15 Sep 1999

4730-01-467-7496
Lubrication Fitting

014677496
500174-1: RNCC: 3 | RNVC: 2

14 Sep 1999

4730-01-467-6629
Pressure Plug Retention Cap

014676629
418877: RNCC: 3 | RNVC: 2

9 Sep 1999

4730-01-467-6393
Fluid Flow Restrictor

014676393
P401-150-060: RNCC: 3 | RNVC: 2

8 Sep 1999

4730-01-467-5271
Sectional Guide

014675271
9511M37P15: RNCC: 3 | RNVC: 2

2 Sep 1999

4730-01-467-5139
Pipe Elbow Assembly

014675139
8791-6-10D: RNCC: 3 | RNVC: 2

1 Sep 1999

4730-01-467-5270
Sectional Guide

014675270
9511M37P16: RNCC: 3 | RNVC: 2

2 Sep 1999

4730-01-467-5269
Sectional Guide

014675269
9511M37P14: RNCC: 3 | RNVC: 2

2 Sep 1999

4730-01-467-5267
Sectional Guide

014675267
9511M37P13: RNCC: 3 | RNVC: 2

2 Sep 1999

4730-01-467-4161
Pipe Elbow

27 Aug 1999

4730-01-466-9269
Straight Tubing Connector

014669269
6V1438: RNCC: 3 | RNVC: 2

6 Aug 1999

4730-01-466-8616
Tube To Boss Elbow

014668616
MS51528A16Z: RNCC: 2 | RNVC: 2

4 Aug 1999

4730-01-466-8321
Tube To Boss Straight Adapter

3 Aug 1999

4730-01-466-6063
Tube Elbow

27 Jul 1999

4730-01-466-4800

21 Jul 1999

4730-01-466-1889
Pipe To Tube Straight Adapter

014661889
259-2242-6-6: RNCC: 3 | RNVC: 2

9 Jul 1999

4730-01-466-0954
Tube To Hose Straight Adapter

014660954
ADTS405-1891-56-M0: RNCC: 3 | RNVC: 2

7 Jul 1999

4730-01-465-9492
Hose Clamp

28 Jun 1999

4730-01-465-8924
Tube Elbow Fitting

014658924
MS51842-20SS: RNCC: 2 | RNVC: 2

25 Jun 1999

4730-01-465-7753
Tube To Hose Straight Adapter

014657753
K7M24-10-08: RNCC: 3 | RNVC: 2

22 Jun 1999

4730-01-465-6390
Pipe To Tube Tee

16 Jun 1999

4730-01-465-6318
Pipe Nipple

014656318
3/4NPT X 3: RNCC: 3 | RNVC: 2
4568K194: RNCC: 3 | RNVC: 2
9325C03-1852: RNCC: D | RNVC: 9

16 Jun 1999

4730-01-465-5765
Hose Nipple

014655765
186100H8-8S: RNCC: 3 | RNVC: 2

14 Jun 1999

4730-01-465-5767
Tube To Hose Elbow

014655767
1SA6FJB6: RNCC: 3 | RNVC: 2

14 Jun 1999

4730-01-465-5761
Hose Coupling

014655761
1SA4: RNCC: 3 | RNVC: 2

14 Jun 1999

4730-01-465-4325
Suction Strainer

014654325
12466679-2: RNCC: 3 | RNVC: 2

8 Jun 1999

4730-01-465-3698
Self-Sealing Coupling Half

014653698
101944-02: RNCC: 3 | RNVC: 2

3 Jun 1999

4730-01-465-3183
Tube Reducer

014653183
B-601-PC-2: RNCC: 3 | RNVC: 9

1 Jun 1999

4730-01-465-1243
Tube To Boss Straight Adapter

21 May 1999

4730-01-464-7899
Hose Clamp

11 May 1999

4730-01-464-7772
Sediment Strainer Body

014647772
060D11-01211: RNCC: 3 | RNVC: 2
060D11-01211: RNCC: 5 | RNVC: 9
060DH1-211 ITEM 1: RNCC: D | RNVC: 9
500-S4824-F-1385602B: RNCC: D | RNVC: 9

10 May 1999

4730-01-464-6156
Boss Reducer

5 May 1999

4730-01-464-2342
Reel Elbow

014642342
IS0-18-XX: RNCC: 3 | RNVC: 2

22 Apr 1999

4730-01-464-0126
Flexible Tube Coupling Assembly

014640126
44010: RNCC: 3 | RNVC: 2

13 Apr 1999

4730-01-463-9302
Nuclear Reactor Repair Parts

014639302
MIL-F-23509: RNCC: 4 | RNVC: 1
MILF23509ELB1INSCH409DEG: RNCC: 5 | RNVC: 1
SAFC-0386: RNCC: 5 | RNVC: 1

9 Apr 1999

4730-01-463-8664
Aircraf Tube Nipple

014638664
MS9193-12: RNCC: 3 | RNVC: 2
NSN SPECIFIC V-22 AE1107C ENGINE: RNCC: 5 | RNVC: 2

8 Apr 1999

4730-01-463-7586
Tube Fitting Flared Sleeve

5 Apr 1999

4730-01-463-7205
Pipe Plug

2 Apr 1999

4730-01-463-5023
Tube To Hose Elbow

014635023
27-21140-059: RNCC: 3 | RNVC: 2

24 Mar 1999

4730-01-463-3583
Sediment Strainer Body

014633583
SK-A-40589(MOD): RNCC: 3 | RNVC: 1

17 Mar 1999

4730-01-463-3427
Pipe Fitting Assortment

014633427
608-4363048ITEMIII-25: RNCC: 3 | RNVC: 1

17 Mar 1999

4730-01-463-2616
Pipe Flange

014632616
V2C13210-8DA: RNCC: 3 | RNVC: 1
V3E10086 ITEM 9: RNCC: 5 | RNVC: 1
V2C13210-8DAC1: RNCC: 5 | RNVC: 2
V3E10086 ITEM 9C1: RNCC: 5 | RNVC: 2

13 Mar 1999

4730-01-463-2584
Pipe To Boss Straight Adapter

014632584
215-7313902CH-F34(SPCLN): RNCC: 3 | RNVC: 1

12 Mar 1999

4730-01-463-2585
Pipe To Boss Straight Adapter

014632585
215-7313902CH-F33(SPCLN): RNCC: 3 | RNVC: 1

12 Mar 1999

4730-01-463-1078
Fluid-Emulsion Spray Nozzle

014631078
0096-0018-1: RNCC: 3 | RNVC: 2
0096-0018: RNCC: 5 | RNVC: 9

8 Mar 1999

4730-01-463-0427
Air Line Manifold

014630427
790863-001: RNCC: 3 | RNVC: 2

3 Mar 1999

4730-01-462-9373

25 Feb 1999

4730-01-462-8881
Coupling Retainer

23 Feb 1999

4730-01-462-8875
Tube Coupling

014628875
8Q2117: RNCC: 3 | RNVC: 2

23 Feb 1999

4730-01-462-8423
Aircraft Tube Elbow

014628423
7M1127T12: RNCC: 3 | RNVC: 2
R51043T12: RNCC: 5 | RNVC: 2

19 Feb 1999

4730-01-462-8427
M Aircraft Tube Tee

014628427
7M1125T1210: RNCC: 3 | RNVC: 2

19 Feb 1999

4730-01-462-8417
Aircraft Tube Elbow

014628417
7M1122T12: RNCC: 3 | RNVC: 2

19 Feb 1999

4730-01-462-8338
Aircraft Tube Elbow

014628338
7M1124T12: RNCC: 3 | RNVC: 2

19 Feb 1999

4730-01-462-8337
Aircraft Tube Elbow

014628337
R51002T10: RNCC: 3 | RNVC: 2
7M1124T10: RNCC: 5 | RNVC: 2

19 Feb 1999

4730-01-462-7632
Tube Elbow

014627632
7M1124T6: RNCC: 3 | RNVC: 2
L51002T06: RNCC: 5 | RNVC: 2

17 Feb 1999

4730-01-462-7641
Tube Elbow

014627641
7M1122T6: RNCC: 3 | RNVC: 2
L51003T06: RNCC: 5 | RNVC: 2

17 Feb 1999

4730-01-462-7488
Quick Disconnect Coupling Half

014627488
ML4-K26: RNCC: 3 | RNVC: 2

17 Feb 1999

4730-01-462-6999
Tube Tee

12 Feb 1999

4730-01-462-2921
Tube Elbow

014622921
L50003T04: RNCC: 3 | RNVC: 2
7M1121T4: RNCC: 5 | RNVC: 2

28 Jan 1999

4730-01-462-2920
Tube Union

014622920
R50001T12: RNCC: 3 | RNVC: 2
7M1120T12: RNCC: 5 | RNVC: 2

28 Jan 1999

4730-01-462-2917
Tube Union

014622917
R50001T10: RNCC: 3 | RNVC: 2
7M1120T10: RNCC: 5 | RNVC: 2

28 Jan 1999

4730-01-462-2897
Tube Elbow

014622897
L51052T0806: RNCC: 3 | RNVC: 2
7M1125T0806: RNCC: 5 | RNVC: 2

28 Jan 1999

4730-01-462-2927
Tube Elbow

014622927
L50043T06: RNCC: 3 | RNVC: 2
7M1159T6: RNCC: 5 | RNVC: 2

28 Jan 1999

4730-01-462-2902
Tube Tee

014622902
L51094T100608: RNCC: 3 | RNVC: 2
7M1152T100608: RNCC: 5 | RNVC: 2

28 Jan 1999

4730-01-462-2923
Tube Tee

014622923
L50004T04: RNCC: 3 | RNVC: 2
7M1129T4: RNCC: 5 | RNVC: 2

28 Jan 1999

4730-01-462-2801
Tube Tee

014622801
L50004T06: RNCC: 3 | RNVC: 2
7M1129T6: RNCC: 5 | RNVC: 2

28 Jan 1999

4730-01-462-2900
Tube Tee

014622900
L51054T060404: RNCC: 3 | RNVC: 2
7M1134T060404: RNCC: 5 | RNVC: 2

28 Jan 1999

4730-01-462-2893
Tube Union

014622893
L50001T08: RNCC: 3 | RNVC: 2
7M1120T8: RNCC: 5 | RNVC: 2

28 Jan 1999

4730-01-462-2895
Tube Elbow

014622895
L51053T0806: RNCC: 3 | RNVC: 2
7M1123T0806: RNCC: 5 | RNVC: 2

28 Jan 1999

4730-01-462-2812
Tube To Hose Straight Adapter

014622812
L51201T04: RNCC: 3 | RNVC: 2
7M1167T4: RNCC: 5 | RNVC: 2

28 Jan 1999

4730-01-462-2797
Tube Elbow

014622797
L50003T06: RNCC: 3 | RNVC: 2
7M1121T6: RNCC: 5 | RNVC: 2

28 Jan 1999

4730-01-462-2795
Tube Union

014622795
L50001T06: RNCC: 3 | RNVC: 2
7M1120T6: RNCC: 5 | RNVC: 2

28 Jan 1999

4730-01-462-2799
Tube Elbow

014622799
L50003T08: RNCC: 3 | RNVC: 2
7M1121T8: RNCC: 5 | RNVC: 2

28 Jan 1999

4730-01-462-2802
Tube Tee

014622802
R50054T101012: RNCC: 3 | RNVC: 2
7M1130T101012: RNCC: 5 | RNVC: 2

28 Jan 1999

4730-01-462-0514
Hose Clamp

014620514
5740171: RNCC: 3 | RNVC: 2
0722112: RNCC: 5 | RNVC: 2

19 Jan 1999

4730-01-461-7416
Sediment Strainer

014617416
3323AS380-1: RNCC: 3 | RNVC: 2

31 Dec 1998

4730-01-461-6501
Adapter Purge

014616501
JA218875-005: RNCC: 3 | RNVC: 2

22 Dec 1998

4730-01-461-6351
Quick Disc Coupling

22 Dec 1998

4730-01-461-5621

17 Dec 1998

4730-01-461-3441
Tube Cap

9 Dec 1998

4730-01-461-3306
Tube Cap

9 Dec 1998

4730-01-461-2267
Tube To Boss Straight Adapter

014612267
8-6-F5 BX-SS: RNCC: 3 | RNVC: 2

3 Dec 1998

4730-01-460-8854
Pipe To Tube Straight Adapter

014608854
2239-6-4B: RNCC: 3 | RNVC: 2
6-4-070603BA: RNCC: 5 | RNVC: 1

19 Nov 1998

4730-01-460-8739
Quick Disconnect Coupling Half

19 Nov 1998

4730-01-460-8660
Quick Coupling Half

19 Nov 1998

4730-01-460-8663
Quick Coupling Half

19 Nov 1998

4730-01-460-8318
Tube Elbow

18 Nov 1998

4730-01-460-7716
Quick Disconne Coupling Assembly

16 Nov 1998

4730-01-460-7015
Tube Reducer Body

014607015
16-12 TRLO-S: RNCC: 3 | RNVC: 2
1HB227: RNCC: 5 | RNVC: 2

13 Nov 1998

4730-01-460-6419
Pipe Coupling

014606419
13230E5943-101: RNCC: 3 | RNVC: 2

12 Nov 1998

4730-01-460-5767
Hydraulic System Access Manifold

9 Nov 1998

4730-01-460-5213
Tube To Boss Tee

6 Nov 1998

4730-01-460-5076
Tube To Gas Fitting Straight Adapter

014605076
40333: RNCC: 3 | RNVC: 2

6 Nov 1998

4730-01-460-4842
Hydraulic System Accessories Manifold

5 Nov 1998

4730-01-460-3679
Tube To Boss Straight Adapter

4 Nov 1998

4730-01-460-2207
Sediment Strainer Element

014602207
630B REV0 ITEM25: RNCC: 3 | RNVC: 2
7630B-1IN-25-80M: RNCC: 5 | RNVC: 2

29 Oct 1998

4730-01-460-1592
Adapter And Flange Assembly

28 Oct 1998

4730-01-459-9561
Pipe Plug

014599561
BK-7680-VB: RNCC: 3 | RNVC: 1
15-0093 PC 19: RNCC: 5 | RNVC: 1
AA-784 PC 19: RNCC: 5 | RNVC: 1
LO4997: RNCC: 5 | RNVC: 2
15-0093: RNCC: D | RNVC: 9
AA-784: RNCC: D | RNVC: 9

20 Oct 1998

4730-01-459-8361
Tube To Hose Straight Adapter

16 Oct 1998

4730-01-459-5880
Tube Fitting Clinch Sleeve

014595880
MS21922-12R: RNCC: 2 | RNVC: 2

7 Oct 1998

4730-01-459-5856
Pipe Plug

014595856
111148046: RNCC: 3 | RNVC: 2

7 Oct 1998

4730-01-459-5857
Pipe Plug

014595857
111148047: RNCC: 3 | RNVC: 2

7 Oct 1998

4730-01-459-4626
Tube-Hose Adapter Body

014594626
3307834-5: RNCC: 3 | RNVC: 2

2 Oct 1998

4730-01-459-4360
Quick Disconnect Wye

014594360
13230E6064-01: RNCC: 3 | RNVC: 2
13230E6064: RNCC: 5 | RNVC: 2
64072DV: RNCC: 5 | RNVC: 2

1 Oct 1998

4730-01-459-3621
Sediment Strainer Element

014593621
2674953: RNCC: 3 | RNVC: 2

29 Sep 1998

4730-01-459-1092
Sediment Strainer

014591092
136YF 2IN 1/16M: RNCC: 3 | RNVC: 2

21 Sep 1998

4730-01-459-0445
Hydraulic System Accessories Manifold

014590445
85637-10: RNCC: 3 | RNVC: 2
9-926-108541: RNCC: 5 | RNVC: 2

18 Sep 1998

4730-01-459-0204
Hose Clamp

014590204
DC301027460: RNCC: 3 | RNVC: 1

17 Sep 1998

4730-01-458-8490
Self-Sealing Coupling Half

014588490
13213277-2: RNCC: 3 | RNVC: 2

11 Sep 1998

4730-01-458-8161
Union Tailpiece

014588161
1560 ITEM 4 1.25IN: RNCC: 3 | RNVC: 2

10 Sep 1998

4730-01-458-5646
Pipe Swivel Joint

31 Aug 1998

4730-01-458-5353
Self-Sealing Coupling Half

014585353
13213276-1: RNCC: 3 | RNVC: 2

29 Aug 1998

4730-01-458-5351
Self-Sealing Coupling Half

014585351
13213276-2: RNCC: 3 | RNVC: 2

29 Aug 1998

4730-01-458-4932
Tube Coupling

014584932
SS-38M0-61: RNCC: 3 | RNVC: 2
SS-38M0-61: RNCC: 5 | RNVC: 9

28 Aug 1998

4730-01-458-4411
Pipe Tee

26 Aug 1998

4730-01-458-3455
Sediment Strainer Element

014583455
1-1/2IN692-S-B-B: RNCC: 3 | RNVC: 2

21 Aug 1998

4730-01-458-3456
Sediment Strainer Element

014583456
S-1 1/4-692-4-F-0-0: RNCC: 3 | RNVC: 2

21 Aug 1998

4730-01-458-2993
Sediment Strainer Element

014582993
S-0.25-1710-4-0-16-0: RNCC: 3 | RNVC: 2

20 Aug 1998

4730-01-458-2994
Sediment Strainer Element

014582994
AN-0.25-351-H-20SSTL: RNCC: 3 | RNVC: 2

20 Aug 1998

4730-01-458-2652
Pipe To Tube Tee

014582652
SS-16M0-3TMT: RNCC: 3 | RNVC: 2

19 Aug 1998

4730-01-458-2661
Pipe To Tube Straight Adapter

014582661
SS-38-MTA-1-24: RNCC: 3 | RNVC: 2
SS-38-MTA-1-24: RNCC: 5 | RNVC: 9

19 Aug 1998

4730-01-458-2650
Pipe To Tube Tee

014582650
SS-12M0-3-4TMT: RNCC: 3 | RNVC: 2

19 Aug 1998

4730-01-458-2668
Pipe To Tube Straight Adapter

014582668
SS-16-MTA-7-8RG: RNCC: 3 | RNVC: 2
SS-16-MTA-7-8RG: RNCC: 5 | RNVC: 9

19 Aug 1998

4730-01-458-2662
Pipe To Tube Straight Adapter

014582662
SS-30-MTA-1-16: RNCC: 3 | RNVC: 2
SS-30-MTA-1-16: RNCC: 5 | RNVC: 9

19 Aug 1998

4730-01-458-2664
Pipe To Tube Straight Adapter

014582664
SS-30-MTA-1-20: RNCC: 3 | RNVC: 2
SS-30-MTA-1-20: RNCC: 5 | RNVC: 9

19 Aug 1998

4730-01-458-2666
Pipe To Tube Straight Adapter

014582666
SS-30-MTA-1-20RP: RNCC: 3 | RNVC: 2
SS-30-MTA-1-20RP: RNCC: 5 | RNVC: 9

19 Aug 1998

4730-01-458-2667
Pipe To Tube Straight Adapter

014582667
SS-38-MTA-1-24RP: RNCC: 3 | RNVC: 2
SS-38-MTA-1-24RP: RNCC: 5 | RNVC: 9

19 Aug 1998

4730-01-458-2651
Pipe To Tube Tee

014582651
SS-8M0-3-4TMT: RNCC: 3 | RNVC: 2

19 Aug 1998

4730-01-458-1405
Sediment Strainer

014581405
AN-1.0-852: RNCC: 3 | RNVC: 2
AN-1.0-852-1: RNCC: 5 | RNVC: 2

14 Aug 1998

4730-01-458-1134
Quick Disconnect Coupling Half

014581134
4HF4: RNCC: 3 | RNVC: 2

13 Aug 1998

4730-01-457-9223
Pipe Reducer

014579223
4-2 140139C: RNCC: 3 | RNVC: 2

7 Aug 1998

4730-01-457-8622
Quick Disconnect Coupling Half

014578622
PLCD100-04 BSPT: RNCC: 3 | RNVC: 2

5 Aug 1998

4730-01-457-8142
Sediment Strainer

014578142
AN-1.5-862-0.057SSTL: RNCC: 3 | RNVC: 2

4 Aug 1998

4730-01-457-7785
Tube Union

014577785
12466619-1: RNCC: 3 | RNVC: 2

4 Aug 1998

4730-01-457-7792
Suction Strainer

014577792
12466679: RNCC: 3 | RNVC: 2

4 Aug 1998

4730-01-457-7783
Tube Tee

014577783
12466625: RNCC: 3 | RNVC: 2

4 Aug 1998

4730-01-457-7791
Tube Union

014577791
12466619-4: RNCC: 3 | RNVC: 2

4 Aug 1998

4730-01-457-7796
Tube Union

014577796
12466619-5: RNCC: 3 | RNVC: 2

4 Aug 1998

4730-01-457-6120
Tube Tee

014576120
MS24395D3: RNCC: 2 | RNVC: 2

28 Jul 1998

4730-01-457-3735
Tube Reducer

014573735
16-8 TRBTX-SS: RNCC: 3 | RNVC: 1
259-221501-16-8: RNCC: 5 | RNVC: 9

21 Jul 1998

4730-01-457-2090
Quick Disconnect Coupling Half

014572090
2HK-LL2-K16: RNCC: 3 | RNVC: 2

16 Jul 1998

4730-01-457-2089
Quick Disconnect Coupling Half

014572089
2HK-LL2-H16: RNCC: 3 | RNVC: 2

16 Jul 1998

4730-01-456-6683
Externally Threaded Ring

22 Jun 1998

4730-01-456-5964
Quick Disconnect Coupling Half

014565964
3201-16359-0002: RNCC: 3 | RNVC: 2

18 Jun 1998

4730-01-456-5961
Quick-Disconnect Nipple

014565961
3201-16359-0001: RNCC: 3 | RNVC: 2

18 Jun 1998

4730-01-456-5689
Tube Seal Bonnet

014565689
AN929-8W: RNCC: 2 | RNVC: 2

18 Jun 1998

4730-01-456-5415
Flange To Pipe Straight Adapter

014565415
820-2178020-9: RNCC: 3 | RNVC: 1

17 Jun 1998

4730-01-456-5448
Pipe Bushing

014565448
12463220: RNCC: 3 | RNVC: 2
12463220: RNCC: 3 | RNVC: 2

17 Jun 1998

4730-01-456-5041
Pipe To Tube Straight Adapter

16 Jun 1998

4730-01-456-1631
Fluid Flow Restrictor

014561631
MB1020-3: RNCC: 3 | RNVC: 2

2 Jun 1998

4730-01-455-9493
Pipe Elbow

014559493
5004-550: RNCC: 3 | RNVC: 2

21 May 1998

4730-01-455-9497
Pipe Elbow

014559497
5004-500: RNCC: 3 | RNVC: 2

21 May 1998

4730-01-455-9496
Pipe Elbow

014559496
5111-550: RNCC: 3 | RNVC: 2

21 May 1998

4730-01-455-8930
Tube Elbow

20 May 1998

4730-01-455-8926
Pipe Tee

014558926
5121-400: RNCC: 3 | RNVC: 2

20 May 1998

4730-01-455-8212
Tube Coupling Nut Assembly

014558212
12K36-24A: RNCC: 3 | RNVC: 2

18 May 1998

4730-01-455-6336
Hose Clamp

014556336
627832: RNCC: 3 | RNVC: 1
2CSK3020-136ITEM4: RNCC: 5 | RNVC: 1

8 May 1998

4730-01-455-3759
Tube Swing Joint

30 Apr 1998

4730-01-455-3744
Hexagon Self-Locking Nut

30 Apr 1998

4730-01-455-2180
Pipe Elbow

014552180
2101-2-2: RNCC: 3 | RNVC: 2
32726879: RNCC: 5 | RNVC: 2

25 Apr 1998

4730-01-455-1157
Hose Clamp

014551157
94293-0300: RNCC: 3 | RNVC: 2
9474142-1: RNCC: 5 | RNVC: 2
C42093N-75-300-K1: RNCC: 5 | RNVC: 9
9474142-1: RNCC: 5 | RNVC: 9
9474142: RNCC: D | RNVC: 9

22 Apr 1998

4730-01-455-1276
Quick Disconnect Reducer

23 Apr 1998

4730-01-455-0444
Ringlock Union

014550444
R51076T101004: RNCC: 3 | RNVC: 2

21 Apr 1998

4730-01-454-9378
Fluid Passage Bolt

17 Apr 1998

4730-01-454-8274
Tube Elbow

014548274
HS4519-5: RNCC: 3 | RNVC: 2
HS4519-5: RNCC: 5 | RNVC: 9

14 Apr 1998

4730-01-454-7556
Sediment Strainer

014547556
IT-1.50IPS: RNCC: 3 | RNVC: 2
1110-150: RNCC: 5 | RNVC: 2
IT-1-1/2IN: RNCC: 5 | RNVC: 2

13 Apr 1998

4730-01-454-7194
Union Nut

014547194
10-269: RNCC: 3 | RNVC: 2
REPAIR PART: RNCC: 5 | RNVC: 1
LL-H47-5219: RNCC: 5 | RNVC: 9
10-269: RNCC: 5 | RNVC: 9

10 Apr 1998

4730-01-454-4995
Tube-Hose Fitting Compression Sleeve

014544995
REPAIR PART: RNCC: 3 | RNVC: 2
53-038: RNCC: 5 | RNVC: 1
LL-H47-5222: RNCC: 5 | RNVC: 9

2 Apr 1998

4730-01-454-4708
Sediment Strainer Element

014544708
AN-1.0-862BC-316L-N3 ITEM 3: RNCC: 3 | RNVC: 2

1 Apr 1998

4730-01-454-3765
Sediment Strainer Element

014543765
845-7016077-X-012: RNCC: 3 | RNVC: 1

27 Mar 1998

4730-01-454-3410
Pipe To Tube Straight Adapter

014543410
A4540: RNCC: 3 | RNVC: 9
334543P01: RNCC: 5 | RNVC: 9
334543P01: RNCC: 7 | RNVC: 2
334543P01: RNCC: 7 | RNVC: 9
334543: RNCC: D | RNVC: 9

26 Mar 1998

4730-01-454-1992
Pipe To Hose Elbow

014541992
5-418922-01: RNCC: 3 | RNVC: 2

23 Mar 1998

4730-01-454-1522
Quick Disconnect Cap

014541522
634B-NA 1.25-2-SS: RNCC: 3 | RNVC: 2
634B-NA 1.25-2-SS: RNCC: 5 | RNVC: 9

20 Mar 1998

4730-01-453-8868
Tube Coupling

12 Mar 1998

4730-01-453-8815
Pipe Elbow

014538815
5359: RNCC: 3 | RNVC: 2

12 Mar 1998

4730-01-453-8355
Sediment Strainer

014538355
846075: RNCC: 3 | RNVC: 1
H-7860ITEM118: RNCC: 5 | RNVC: 1
H-7862ITEM118: RNCC: 5 | RNVC: 1
NB-3154PT846075: RNCC: 5 | RNVC: 1

11 Mar 1998

4730-01-453-7326
Machine Thread Plug

9 Mar 1998

4730-01-453-7322
Hydraulic Manifold

014537322
9S000423-B: RNCC: 3 | RNVC: 2
9S000423-B: RNCC: 5 | RNVC: 2

9 Mar 1998

4730-01-453-7337
Machine Thread Plug

9 Mar 1998

4730-01-453-4939
Lubricating Oil Cup

3 Mar 1998

4730-01-453-4680
Pipe Bushing

2 Mar 1998

4730-01-453-3360
Tube Tee

014533360
01-90-2445: RNCC: 3 | RNVC: 2
REPAIR PART: RNCC: 5 | RNVC: 1
01-90-2445: RNCC: 5 | RNVC: 9
LL-H47-1674: RNCC: 5 | RNVC: 9

26 Feb 1998

4730-01-453-2951
Pipe To Tube Straight Adapter

25 Feb 1998

4730-01-453-2930
Strainer

014532930
AN-4.0-851M-D-ITEM 3: RNCC: 3 | RNVC: 2

25 Feb 1998

4730-01-453-1214
Fluid Passage Bolt

014531214
17P6W8247-39: RNCC: 3 | RNVC: 2

20 Feb 1998

4730-01-453-0483
Fluid Filter Element

014530483
080995-2.5: RNCC: 3 | RNVC: 2
080995: RNCC: D | RNVC: 9

18 Feb 1998

4730-01-453-0425
Swivel Flange To Tube Elbow

014530425
679-F-06: RNCC: 3 | RNVC: 2

18 Feb 1998

4730-01-452-8131
Tube Coupling

014528131
DPLE000020: RNCC: 3 | RNVC: 2
DPLE000: RNCC: D | RNVC: 9

9 Feb 1998

4730-01-452-6798
Pipe To Tube Elbow

014526798
P-3382: RNCC: 3 | RNVC: 2
P-3382: RNCC: 5 | RNVC: 9

4 Feb 1998

4730-01-452-6801
Pipe To Tube Elbow

014526801
P-S270: RNCC: 3 | RNVC: 2
P-S270: RNCC: 5 | RNVC: 9

4 Feb 1998

4730-01-452-6797
Pipe To Tube Elbow

014526797
P-50001265: RNCC: 3 | RNVC: 2
P-50001265: RNCC: 5 | RNVC: 9

4 Feb 1998

4730-01-452-6794
Tube Fitting Clinch Sleeve

014526794
75316-3: RNCC: 3 | RNVC: 2

4 Feb 1998

4730-01-452-6719
Pipe To Tube Elbow

014526719
P-1287: RNCC: 3 | RNVC: 2
P-1287: RNCC: 5 | RNVC: 9

3 Feb 1998

4730-01-452-6725
Pipe Tee

014526725
P-MP25A77: RNCC: 3 | RNVC: 2
P-MP25A77: RNCC: 5 | RNVC: 9

3 Feb 1998

4730-01-452-6723
Straight Tubing Connector

014526723
P-MP26A18: RNCC: 3 | RNVC: 2
P-MP26A18: RNCC: 5 | RNVC: 9

3 Feb 1998

4730-01-452-4765
Pipe Plug

014524765
4638K827: RNCC: 3 | RNVC: 2

28 Jan 1998

4730-01-452-3742
Hose To Boss Straight Adapter

014523742
134386: RNCC: 3 | RNVC: 2

26 Jan 1998

4730-01-452-3741
Fluid-Emulsion Spray Nozzle

014523741
141045: RNCC: 3 | RNVC: 2

26 Jan 1998

4730-01-452-2919
Tube Cap

014522919
692891: RNCC: 3 | RNVC: 2

22 Jan 1998

4730-01-452-1788
Flexible Tube Coupling Assembly

014521788
5MA1155-2: RNCC: 3 | RNVC: 2

20 Jan 1998

4730-01-452-0353

13 Jan 1998

4730-01-452-0213
Union Nut

014520213
DS-B-90374-3: RNCC: 3 | RNVC: 1
301707: RNCC: 5 | RNVC: 1
301707L1: RNCC: 5 | RNVC: 2
DS-B-90374-3L1: RNCC: 5 | RNVC: 2

13 Jan 1998

4730-01-451-8580
Air Brak Repair Kit

014518580
4730NR0045: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-01-451-7433
Cartridge Cap

014517433
00-4033-04: RNCC: 3 | RNVC: 2

30 Dec 1997

4730-01-451-7431
Cartridge Cap

014517431
00-4033-02: RNCC: 3 | RNVC: 2

30 Dec 1997

4730-01-451-1859
Tube To Hose Straight Adapter

8 Dec 1997

4730-01-451-1596
Pipe Nipple

6 Dec 1997

4730-01-451-1302
Straight Tubing Connector

014511302
820-6652562H01: RNCC: 3 | RNVC: 1

5 Dec 1997

4730-01-450-8852
Tube Nipple

014508852
E150-1-12-9: RNCC: 3 | RNVC: 2

25 Nov 1997

4730-01-450-8347
Tube To Hose Straight Adapter

014508347
FJ9760-24-24S: RNCC: 3 | RNVC: 2

24 Nov 1997

4730-01-450-7703
Quick Disconnect Coupling Half

21 Nov 1997

4730-01-450-5046
Pipe To Tube Elbow

13 Nov 1997

4730-01-450-2614
Hose Clamp

014502614
57490-350: RNCC: 3 | RNVC: 2

31 Oct 1997

4730-01-449-9697
Boss Nipple

014499697
4GCU W/O O-RING: RNCC: 3 | RNVC: 2
7005538-1: RNCC: 7 | RNVC: 2
SK7005538: RNCC: D | RNVC: 9

22 Oct 1997

4730-01-449-7798
Tube Coupling Nut

15 Oct 1997

4730-01-449-7697
Fluid Flow Restrictor

014497697
4M307-3-16: RNCC: 3 | RNVC: 2
4M307-3-16: RNCC: 5 | RNVC: 2
4M307-3-16: RNCC: 5 | RNVC: 9
4M307-3-16: RNCC: 5 | RNVC: 9

14 Oct 1997

4730-01-449-6558
Flange To Tube Straight Adapter

014496558
16Y244-101: RNCC: 3 | RNVC: 2

8 Oct 1997

4730-01-449-1842
Rotalok Adapter

014491842
BA09X14: RNCC: 3 | RNVC: 9
BA09X14: RNCC: 5 | RNVC: 9
BA09X14: RNCC: C | RNVC: 1

22 Sep 1997

4730-01-448-6871
Adapter Union

8 Sep 1997

4730-01-448-6869
Pipe Tee

8 Sep 1997

4730-01-448-2622
Pipe Coupling

014482622
AE50000K: RNCC: 3 | RNVC: 2
GU500AD12: RNCC: 5 | RNVC: 2

26 Aug 1997

4730-01-448-1122
Tube Nipple

014481122
4HBTX-B L1: RNCC: 3 | RNVC: 1

21 Aug 1997

4730-01-448-0535
Tube Tee

014480535
AE50500KJG: RNCC: 3 | RNVC: 2
GT515AU12-10-6: RNCC: 5 | RNVC: 2
AE50500: RNCC: D | RNVC: 9

20 Aug 1997

4730-01-448-0734
Moisture Trap

014480734
ADTS405-1893-52-M0: RNCC: 3 | RNVC: 2

20 Aug 1997

4730-01-447-9971
Boss Bushing

014479971
9999-0032-009: RNCC: 3 | RNVC: 2
REPAIR PART: RNCC: 5 | RNVC: 1
LL-H47-0336: RNCC: 5 | RNVC: 9

19 Aug 1997

4730-01-447-9197
Pipe Coupling

014479197
17P2N4182-503: RNCC: 3 | RNVC: 2

16 Aug 1997

4730-01-447-8618
Pipe Repair Clamp

014478618
3121-AS: RNCC: 3 | RNVC: 9

15 Aug 1997

4730-01-447-4584
Pipe Coupling

7 Aug 1997

4730-01-446-9744
Hose Connector Sleeve

014469744
282914-1: RNCC: 3 | RNVC: 2

22 Jul 1997

4730-01-446-8711
Tube Reducer

014468711
2MP4739: RNCC: 3 | RNVC: 2

18 Jul 1997

4730-01-446-8713
Tube Reducer

014468713
2MP4738: RNCC: 3 | RNVC: 2

18 Jul 1997

4730-01-446-5106
Hose Cap

014465106
HBC-1.5: RNCC: 3 | RNVC: 2

8 Jul 1997

4730-01-446-5104
Hose Reducer

8 Jul 1997

4730-01-446-4088
Hose Reducer

014464088
GH KIT 1.5: RNCC: 3 | RNVC: 2

1 Jul 1997

4730-01-446-3419
Pipe To Tube Straight Adapter

014463419
SS-10-TSW-7-8: RNCC: 3 | RNVC: 2
SS-10-TSW-7-8: RNCC: 5 | RNVC: 9

30 Jun 1997

4730-01-446-0232
Tube Tee

014460232
AP6325T080806: RNCC: 3 | RNVC: 2
C7931-8L-8-6: RNCC: 7 | RNVC: 2
C7931: RNCC: D | RNVC: 9

19 Jun 1997

4730-01-446-0165
Tube Union

014460165
P50375-36H: RNCC: 3 | RNVC: 2

19 Jun 1997

4730-01-445-9781
Tube Reducer Body

014459781
P10373-31J: RNCC: 3 | RNVC: 2

18 Jun 1997

4730-01-445-9756
Tube Union

014459756
P50375-13H: RNCC: 3 | RNVC: 2

18 Jun 1997

4730-01-445-9759
Tube Union

014459759
P48375-74H: RNCC: 3 | RNVC: 2
H4837594: RNCC: 5 | RNVC: 2
H48375-74: RNCC: 5 | RNVC: 2
P48375-74H: RNCC: 5 | RNVC: 2

18 Jun 1997

4730-01-445-8168
Fluid Passage Bolt

13 Jun 1997

4730-01-445-7521
Tube Union

014457521
P48375-75J: RNCC: 3 | RNVC: 2

11 Jun 1997

4730-01-445-5636
Sediment Strainer Element

014455636
632C-1 1/4IN PC 5: RNCC: 3 | RNVC: 2
632C-A-0001: RNCC: 5 | RNVC: 9
632C-A: RNCC: D | RNVC: 9

5 Jun 1997

4730-01-445-5598
Hose Connection Kit

014455598
MEC90-0002: RNCC: 3 | RNVC: 9

5 Jun 1997

4730-01-445-4679
Sediment Strainer

014454679
136 1-1/4IPS: RNCC: 3 | RNVC: 2
136-1.250IN: RNCC: C | RNVC: 1
632C-A: RNCC: D | RNVC: 9

3 Jun 1997

4730-01-445-3913
Tube To Hose Straight Adapter

2 Jun 1997

4730-01-445-3296
Blind Pipe Flange

29 May 1997

4730-01-445-0286
Hose Tee

014450286
77301: RNCC: 3 | RNVC: 2

22 May 1997

4730-01-444-9952
Quick Disconnect Coupling Half

21 May 1997

4730-01-444-9087
Tube To Hose Straight Adapter

014449087
6FJ-6LB: RNCC: 3 | RNVC: 2
6FJ-6LB: RNCC: 5 | RNVC: 9

20 May 1997

4730-01-444-8826
Quick Disconnect Coupling Half

19 May 1997

4730-01-444-6927
Hose Clamp

14 May 1997

4730-01-444-6469
Tube Tee

014446469
P12372-90F: RNCC: 3 | RNVC: 2

13 May 1997

4730-01-444-6470
Tube Union

014446470
P50375-58G: RNCC: 3 | RNVC: 2

13 May 1997

4730-01-444-6473
Tube Union

014446473
P48375-96G: RNCC: 3 | RNVC: 2

13 May 1997

4730-01-444-6471
Tube Union

014446471
P48375-72F: RNCC: 3 | RNVC: 2

13 May 1997

4730-01-444-5795
Tube To Hose Straight Adapter

014445795
20FJ-20DN: RNCC: 3 | RNVC: 2

12 May 1997

4730-01-444-5784
Sediment Strainer

12 May 1997

4730-01-444-5351
Fluid Pressure Line Multiple Connector

9 May 1997

4730-01-444-4348
Lubricating Oil Cup

014444348
901-060-208-103: RNCC: 3 | RNVC: 2

7 May 1997

4730-01-444-4347
Quick Disconnect Coupling Assembly

014444347
901-047-063-103: RNCC: 3 | RNVC: 2

7 May 1997

4730-01-444-4349
Lubricating Oil Cup

014444349
901-060-208-105: RNCC: 3 | RNVC: 2

7 May 1997

4730-01-444-3981
Hose Coupling

014443981
1101-3029-000: RNCC: 3 | RNVC: 2
REPAIR PART: RNCC: 5 | RNVC: 1

6 May 1997

4730-01-444-3979
Hose Coupling

014443979
1101-3028-000: RNCC: 3 | RNVC: 2
REPAIR PART: RNCC: 5 | RNVC: 1

6 May 1997

4730-01-444-3028
Pipe Elbow

014443028
501-6938918,SHT 4,ITEM 4 D4: RNCC: 3 | RNVC: 1

4 May 1997

4730-01-444-2890
Hose Coupling

014442890
1101-3028: RNCC: 3 | RNVC: 9
REPAIR PART: RNCC: 5 | RNVC: 1

2 May 1997

4730-01-444-2694
Boss Reducer

014442694
AN919D6: RNCC: 2 | RNVC: 2

2 May 1997

4730-01-444-2004
Quick Disconnect Coupling Assembly

014442004
30-288-2: RNCC: 3 | RNVC: 2

1 May 1997

4730-01-444-1482
Hose Plug

014441482
4083258: RNCC: 3 | RNVC: 2

29 Apr 1997

4730-01-443-8960
Tube Coupling Nut

22 Apr 1997

4730-01-443-8556
Boss Elbow

014438556
255413 PIECE 1407: RNCC: 3 | RNVC: 1
508-6938922 SHT 5 ITEM F-24: RNCC: 5 | RNVC: 1
6938922 SHT 5 ITEM F-24: RNCC: 5 | RNVC: 1
255413 PIECE 1407D4: RNCC: 5 | RNVC: 2
508-6938922 SHT 5 ITEM F-24D4: RNCC: 5 | RNVC: 2
6938922 SHT 5 ITEM F-24D4: RNCC: 5 | RNVC: 2

21 Apr 1997

4730-01-443-6640

15 Apr 1997

4730-01-443-6176

14 Apr 1997

4730-01-443-5984
Tube To Boss Straight Adapter

14 Apr 1997

4730-01-443-5970
Sediment Strainer Element

014435970
RG37807: RNCC: 3 | RNVC: 2

14 Apr 1997

4730-01-443-5978
Sediment Strainer Element

014435978
RG37811: RNCC: 3 | RNVC: 2

14 Apr 1997

4730-01-443-4426
Pipe Plug

10 Apr 1997

4730-01-443-4013
Pipe Nipple

014434013
20005-3: RNCC: 3 | RNVC: 2
LL-H44-1978: RNCC: 5 | RNVC: 1
REPAIR PART: RNCC: 5 | RNVC: 1

9 Apr 1997

4730-01-443-2371
Tube Fitting Clinch Sleeve

014432371
921853-06: RNCC: 3 | RNVC: 2
7D0162T06: RNCC: 5 | RNVC: 2
921853-06: RNCC: 5 | RNVC: 9
921853-06: RNCC: 5 | RNVC: 9
920979-06: RNCC: 5 | RNVC: 9

4 Apr 1997

4730-01-443-1238
Hydraulic System Accessories Manifold

014431238
DAA7221A114-001: RNCC: 3 | RNVC: 2

2 Apr 1997

4730-01-443-1171
Tube Fitting Clinch Sleeve

2 Apr 1997

4730-01-442-6894
Pipe To Tube Straight Adapter

014426894
335830P01: RNCC: 3 | RNVC: 2
335830P01: RNCC: 3 | RNVC: 9
335830P01: RNCC: 5 | RNVC: 9

20 Mar 1997

4730-01-442-3488
Hose Tee

014423488
TT-91288: RNCC: 3 | RNVC: 2

12 Mar 1997

Load More Results