What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Fueling At Sea Breakable Spool?

A Fueling At Sea Breakable Spool (SPOOL,BREAKABLE,FUELING AT SEA) is a cast iron flanged spool, placed in a fueling hose line, having bolt slots for the easy detaching of bolts, and a machined groove around center of spool to permit easy breaking.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Pipe Bend?

A Return Pipe Bend (BEND,PIPE,RETURN) is a fitting designed to join a pipe in a parallel position to another pipe for reversing the flow of gas, steam, air, or liquids. Excludes BEND, SOIL PIPE.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Soil Pipe Reducer?

A Soil Pipe Reducer (REDUCER,SOIL PIPE) is a straight fitting with the spigot end larger than the hub end. It is used to connect two pieces of soil pipe of different size.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Pipe Lateral?

A Pipe Lateral (LATERAL,PIPE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit pipes and/or pipe fittings to be taken off laterally from the main line. It may have side inlet(s).

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - United States (US)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by United States (US) - NCB is 00 to 09

Page 18 of 608

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by United States

47	30	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - United States (US)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 140 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 1485 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 161 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 43 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 191 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 37 Items
What is a Bulkhead Hose Connector? 442 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 1248 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 1056 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 168 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Fueling At Sea Breakable Spool? 17 Items: A Fueling At Sea Breakable Spool (SPOOL,BREAKABLE,FUELING AT SEA) is a cast iron flanged spool, placed in a fueling hose line, having bolt slots for the easy detaching of bolts, and a machined groove around center of spool to permit easy breaking.
What is a Hose Expansion Ring? 44 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 155 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 146 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 6236 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 824 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 3503 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 5982 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 1491 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 55 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 161 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 2820 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 6011 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 2531 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 57 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 1897 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 12 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 301 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 4053 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2024 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 42 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 1418 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 61 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 183 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1037 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Pipe Bend? 59 Items: A Return Pipe Bend (BEND,PIPE,RETURN) is a fitting designed to join a pipe in a parallel position to another pipe for reversing the flow of gas, steam, air, or liquids. Excludes BEND, SOIL PIPE.
What is a Return Tube Bend? 71 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 67 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 327 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Soil Pipe Reducer? 15 Items: A Soil Pipe Reducer (REDUCER,SOIL PIPE) is a straight fitting with the spigot end larger than the hub end. It is used to connect two pieces of soil pipe of different size.
What is a Pipe Flange? 3798 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 137 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 82 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Pipe Lateral? 135 Items: A Pipe Lateral (LATERAL,PIPE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit pipes and/or pipe fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Tube Lateral? 50 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 412 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 4077 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 110 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 1454 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 19 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 5447 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 71 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Soil Pipe Lateral? 32 Items: A Soil Pipe Lateral (LATERAL,SOIL PIPE) is a fitting having one or two branches which are fixed at various angles other than 90 degrees to the run. If item has two branches, they will be located on opposite sides of the run (180 degrees apart) and will be identical. It may have side inlets.
What is a Soil Pipe Tee? 36 Items: A Soil Pipe Tee (TEE,SOIL PIPE) is a fitting consisting of a run and a branch. The branch may be either curved or straight, but the axis of the end connection intersects the axis of the run at right angles. It may have side inlets.
What is a Tube Coupling Inverted Nut? 269 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 127 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1696 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 51 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 1076 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 435 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Pipe Exhaust Head? 24 Items: A Pipe Exhaust Head (EXHAUST HEAD,PIPE) is a metal device open to the atmosphere located on the outside of a building and connected to the end of a pipeline carrying waste steam, for the purpose of muffling the sound and removing entrained oil and condensation.
What is a Pipe Swing Joint? 91 Items: A Pipe Swing Joint (SWING JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane.
What is a Pipe To Tube Swing Joint? 20 Items: A Pipe To Tube Swing Joint (SWING JOINT,PIPE TO TUBE) is a metallic connector usually angular in shape. It is designed to join a length of tube and/or tube fitting to a length of pipe and/or pipe fitting in a fluid line to permit turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Tube Swing Joint? 87 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 156 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 693 Items
What is a Sediment Strainer? 3870 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
Hose Connection Assembly,Air,Salvage 29 Items
What is a Hose Coupling Assembly? 219 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 455 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 58 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 194 Items
What is a Pipe Repair Clamp? 233 Items: A Pipe Repair Clamp (CLAMP,REPAIR,PIPE) is a one-piece or two-piece metal clamp generally used with gasket(s) and designed to repair longitudinal splits and pit holes and/or to support thin walls in a straight run of pipe. See also CLAMP, LEAK REPAIR, PIPE COUPLING.
What is a Pipe Cap? 784 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 1306 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 45 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 2912 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 4738 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 3129 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
What is a Water Closet Spud? 37 Items: A Water Closet Spud (SPUD,WATER CLOSET) is a short coupling of nonferrous metal flanged at one end and with iron pipe threads extending from the other end to the base of the flange. It is generally used to join a water closet bowl to the flushing water supply and is usually supplied with locknut and washer.
What is an Air Eductor? 80 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 264 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 2740 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2961 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Drain Extension Tube? 47 Items: A Drain Extension Tube (TUBE,EXTENSION,DRAIN) is a fabricated tubular product, extruded on one end, used for lengthening waste or flush tubing from plumbing fixtures.
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Pipe Cross? 296 Items: A Pipe Cross (CROSS,PIPE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is designed to be used as a junction at the intersection of pipe and/or pipe fittings.
What is a Pipe To Tube Cross? 39 Items: A Pipe To Tube Cross (CROSS,PIPE TO TUBE) is a fitting having four branches in the same plane whose axes form right angles. One or more of the connections have standard pipe threads or are unthreaded and designed to accommodate a pipe. The remaining connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It may have side inlet(s).
What is a Tube Cross? 429 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipeline Air Drier And Cooler? 36 Items: A Pipeline Air Drier And Cooler (AIR DRIER AND COOLER,PIPELINE) is a unit designed to be connected into an air line to remove particles of condensed vapor, oil, and sediment and to cool the air. It is composed of an expeller, aftercooler, and drain trap, and operates by means of baffles.
What is a Pipe-Tube Escutcheon? 44 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 71 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 68 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 167 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 123 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Drainage Pipe Tee? 26 Items: A Drainage Pipe Tee (TEE,DRAINAGE PIPE) is a fitting having three connections with the branch connection equidistant and fixed at 90 degrees (1.5705 radians) to the run. It is provided with an internal shoulder(s) at the end(s) of its internally threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow of the pipe and/or pipe fitting contents. It may have side inlet(s).
What is a Drainage Pipe Lateral? 58 Items: A Drainage Pipe Lateral (LATERAL,DRAINAGE PIPE) is a fitting having one or two branches which are fixed at various angles other than 90 degrees (1.5705 radians) to the run. It is used as a junction at the intersection of a drainage line and is provided with a shoulder(s) at the end(s) of its internal threaded or unthreaded portion, conforming to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It may have side inlet(s).
What is a Drainage Pipe Tee-Y? 97 Items: A Drainage Pipe Tee-Y (TEE-Y,DRAINAGE PIPE) is a fitting having one or two branches whose internal and/or external portions form a sweep or radius to the run with the connections fixed at 90 degrees (1.5705 radians) to the run. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and to provide a smooth flow ofthe pipe and/or pipe fitting contents. It may have side inlet(s).
What is a Valve Service Box? 12 Items: A Valve Service Box (SERVICE BOX,VALVE) is a sectional metal pipe whose lower or base section is enlarged to cover an underground valve. The primary purpose is to provide an open shaft which will allow the insertion of the service box valve key.
What is a Hose Clamp? 6579 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 70 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Lubricating Fitting Set? 10 Items: A Lubricating Fitting Set is a collection of various types and sizes of grease type lubrication fittings issued as a set.
What is a Fuel Feeder Manifold? 96 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Soil Pipe Ferrule With Plug? 13 Items: A Soil Pipe Ferrule With Plug (FERRULE WITH PLUG,SOIL PIPE) is an item used in the hubs of soil pipe traps or fittings for sealing and to permit clean out when plug is removed.
What is a Pipe Clamp Coupling? 497 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Protective Lubrication Fitting Cap? 52 Items: A Protective Lubrication Fitting Cap (CAP,LUBRICATION FITTING,PROTECTIVE) is a lubrication fitting designed to fit over another lubrication fitting to prevent the entrance of foreign matter into passageway of the fitting and to protect the fitting from external damage. Excludes CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is an Air Line Manifold? 328 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 459 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Soil Pipe Trap? 18 Items: A Soil Pipe Trap (TRAP,SOIL PIPE) is a device having hub and/or spigot ends. It is used in drain of soil systems to prevent sewer gas from backing up beyond desired point by forming a water seal in the line. This is accomplished by its peculiar shape which is usually in the form of a letter P or S. It may have side inlet and/or cleanout.
What is a Pipeline Flexible Spacer? 252 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is a Tank Nipple? 14 Items: A Tank Nipple (NIPPLE,TANK) is a short length of pipe with standard taper pipe threads on one end. The other end has a standard taper pipe thread running into a recognized standard locknut thread. It is usually fitted with locknut and faced coupling. Excludes NIPPLE (1), PIPE.
What is an Adapter Bushing? 596 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 299 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 309 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 619 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 403 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 1223 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Water Well Strainer? 10 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 148 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 45 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 4136 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 151 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 77 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 503 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 162 Items
What is a Pipe Fitting Assortment? 30 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 110 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 121 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 85 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 37 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 206 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 209 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 5713 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 7769 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 1037 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1649 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is an Emergency Damage Control Pipe Repair Kit? 22 Items: An Emergency Damage Control Pipe Repair Kit (REPAIR KIT,PIPE,EMERGENCY DAMAGE CONTROL) is an assembly of expendable and nonexpendable material and equipment such as fibrous glass cloth, mat(s), tape, rubber gloves, goggles, resin, and the like for making emergency repairs to piping systems.
Parts Kit,Self-Sealing Coupling Half 12 Items
What is a Sediment Strainer Body? 300 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 66 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 822 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 47 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 777 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Magnetic Plug Assortment? 26 Items: A Magnetic Plug Assortment (PLUG ASSORTMENT,MAGNETIC) is an assortment of PLUG, MACHINE THREAD, MAGNETIC and/or PLUG, PIPE, MAGNETIC of various types and/or sizes.
What is a Fluid Flow Restrictor Unit? 821 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is a Slip Joint Pipe Coupling? 43 Items: A Slip Joint Pipe Coupling (COUPLING,PIPE,SLIP JOINT) is a straight fitting having external threads on both ends. Each end is equipped with an internally threaded nut having an unthreaded reduced size opening which contains a gasket and other necessary parts. It is designed to join an unthreaded pipe to another unthreaded pipe in a straight line. It forms a tight fluid seal by the compression slip joint method. It may have a pipe stop.
What is an Air Hose Connector? 143 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
Nozzle,Sand Blast 69 Items
What is an Expanding Tube Repair Plug? 26 Items: An Expanding Tube Repair Plug (PLUG,TUBE REPAIR,EXPANDING) is a sleeve shaped item having a hole through its center and equipped with a machine screw, washer, and nut. Designed to be placed in the end of a tube, sealing the tube by turning the screw causing the sleeve to expand against the walls of the tube and in turn expanding the tube. For tapered tube repair plugs, see PLUG, TUBE REPAIR. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Magnetic Pipe Plug? 226 Items: A Magnetic Pipe Plug (PLUG,PIPE,MAGNETIC) is a pipe fitting primarily designed for installation in a lubrication or hydraulic system. It has an integral magnet in the body and external pipe threads.
What is a Sediment Strainer Head? 22 Items: A Sediment Strainer Head (HEAD,SEDIMENT STRAINER) is a component of a sediment strainer designed to contain the inlet and/or outlet ports of the strainer. It acts as a cover and attaches to the BOWL, SEDIMENT or mounts directly to an integral cavity in an engine, manifold, casing, or the like. The item may include relief, check, and/or by-pass valves, means for supporting the strainer element, and means for mounting the strainer. The item does not include a strainer element. Excludes HEAD, FLUID FILTER.
What is a Hose To Boss Straight Adapter? 890 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 1139 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 4275 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 492 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 405 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Pipe To Boss Elbow? 294 Items: A Pipe To Boss Elbow (ELBOW,PIPE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a pipe or pipe fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like. See also ELBOW, PIPE; and ELBOW, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Boss Elbow? 2092 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 263 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 45 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Pipe To Boss Tee? 52 Items: A Pipe To Boss Tee (TEE,PIPE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a pipe or pipe fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Tube To Boss Tee? 1665 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Cross? 52 Items: A Boss Cross (CROSS,BOSS) is a fitting having four branches in the same plane whose axes form right angles. The boss connections for items such as tanks, housings, valve fittings, and the like, have internal or external machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It may have side inlet(s). Excludes CROSS, TUBE.
What is a Boss Reducer? 999 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 83 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 353 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 238 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 160 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 69 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 934 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 223 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 537 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 389 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 882 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 186 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Cross? 12 Items: A Flange Cross (CROSS,FLANGE) is a fitting having four branches in the same plane whose axes form right angles. The connections have a flange designed to connect with another flange connection or a compression type mounting pad. It may include side inlet(s).
What is a Flange Elbow? 458 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 113 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 561 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Pipe Elbow? 283 Items: A Flange To Pipe Elbow (ELBOW,FLANGE TO PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 752 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 126 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 120 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Boss Tee? 19 Items: A Flange To Boss Tee (TEE,FLANGE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5708 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression mounting pad. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Flange To Hose Tee? 17 Items: A Flange To Hose Tee (TEE,FLANGE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a hose or hose fitting.
What is a Flange To Pipe Tee? 33 Items: A Flange To Pipe Tee (TEE,FLANGE TO PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a pipe or pipe fitting.
What is a Flange To Tube Tee? 83 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Cap? 390 Items: A Quick Disconnect Cap (CAP,QUICK DISCONNECT) is a fluid line fitting having an internal quick disconnect feature, designed to fit over a fitting with an external quick disconnect feature, to block the flow of fluid.
What is a Quick Disconnect Elbow? 80 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 457 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 114 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 70 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Pipe Flange Safety Shield? 53 Items: A Pipe Flange Safety Shield (SHIELD,SAFETY,PIPE FLANGE) is an item specifically designed to fit around a pipe flange joint to confine high pressure spray from a flanged joint leak and prevents uncontrolled spray of fluids that could result in injury to personnel and damage to equipment and materials.
What is a Suction Strainer? 365 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Coupling Swage Ferrule? 362 Items: A Tube Coupling Swage Ferrule (FERRULE,SWAGE,TUBE COUPLING) is a flanged cylindrical metallic item used with a plain end tube and swaged in place. It is designed to be used as a component part of a flexible or rigid tube coupling.
What is a Tube Fitting Insert? 374 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Pipe To Tube To Boss Tee? 20 Items: A Pipe To Tube To Boss Tee (TEE,PIPE TO TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Tube To Gas Fitting Straight Adapter? 50 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 947 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Flange To Tube To Boss Tee? 11 Items: A Flange To Tube To Boss Tee (TEE,FLANGE TO TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection is designed to connect with another flange connection or a compression type mounting pad. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube fitting or is unthreaded and designed to accommodate a tube. The boss connection has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting, tube or tube fitting, and boss or boss fitting.
What is a Tube-Hose Adapter Body? 208 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 352 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 249 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 201 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Flared Tube Fitting Conical Seal? 334 Items: A Flared Tube Fitting Conical Seal (SEAL,CONICAL,FLARED TUBE FITTING) is a cylindrical soft metallic crush item used to seal high pressure flared tube connections. It is designed to be inserted between the conical surface of a flared tube fitting and the inner surface of the flared end of the connecting tube.
What is a Quick-Disconnect Nipple? 164 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 49 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Sound Isolation Insert Set? 28 Items: A Sound Isolation Insert Set (INSERT SET,SOUND ISOLATION) is a multipiece item consisting of a nonmetallic positioning insert, thrust insert with a bonded washer and a metallic backup washer. It is specifically designed for use in a piping system sound isolation coupling flexible connector for the purpose of isolating sound.
What is a Sound Isolation Coupling Assembly? 21 Items: A Sound Isolation Coupling Assembly (COUPLING ASSEMBLY,SOUND ISOLATION) is a multipiece item specifically designed for use in a piping system to form a flexible, sound proof pipe joint. It has a flange connection on one end designed to connect with another flange connection. The other has a flange pad designed to accommodate a companion flange.
What is a Tube To Boss Cross? 51 Items: A Tube To Boss Cross (CROSS,TUBE TO BOSS) is a fitting having four branches in the same plane whose axes form right angles. One or more of the connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. The remaining connections are boss connections. The boss connections have internal or external machine threads and are designed to facilitate a gasket, preformed packing, washer, and the like to form a seal at the boss. It may have side inlet(s).
What is a Quick Disconnect Coupling Assembly Parts Kit? 61 Items: A Quick Disconnect Coupling Assembly Parts Kit (PARTS KIT,QUICK DISCONNECT COUPLING ASSEMBLY) is a parts kit used for replacing the worn and/or damaged parts used in a COUPLING ASSEMBLY, QUICK DISCONNECT. It may include such items as springs, snap rings, o-rings, bearings, and the like.
Parts Kit,Sediment Strainer 35 Items
Parts Kit,Self-Sealing Coupling Assembly 10 Items
Parts Kit,Steam Trap 123 Items
Parts Kit,Swivel Joint 35 Items
What is a Boss Outlet? 128 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 25 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 117 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is a Split Flange Parts Kit? 87 Items: A Split Flange Parts Kit (PARTS KIT,SPLIT FLANGE) is a parts kit used to install and/or repair a FLANGE, PIPE (as modified). It may contain such items as flange halfs, bolts, washers, "o" rings and the like.
What is an Exhaust-Intake Pneumatic Muffler? 68 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 79 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 190 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 44 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 102 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
What is a Hose Clamp Kit? 45 Items: A Hose Clamp Kit (CLAMP KIT,HOSE) is it consists of a roll of a specially perforated band that can be cut to a required length and an adjustable fastener that interlocks to make any diameter required.
Connector,Tubing,Straight 364 Items
What is a Hydraulic Manifold Assembly? 914 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Clamp Kit Fastener? 12 Items: A Clamp Kit Fastener (FASTENER,CLAMP KIT) is an adjustable two end attachable item with housing and screw on one end and serrations on the other end. Used with CLAMP (1), KIT.
What is a Hose Fitting Swaging Socket? 12 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 88 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 54 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
What is a Hose Repair Kit? 48 Items: A Hose Repair Kit (REPAIR KIT,HOSE) is a collection of items which may include MENDER, HOSE; CLAMP (1), HOSE; CLAMP, PLIER; CLAMP (1), SCREW QUICK ADJUSTING; HOSE ADAPTERS; CLAMP PINCERS and the like. It is used for temporary or permanent repair of a hose(s) connection.
Nozzle,Dry Honing 13 Items
Adapter,Check Valve 73 Items
Connector,Suction Pump 13 Items
Handle,Weldment,Double Swivel 16 Items
Tube Connector Assembly,Flowmeter 66 Items
Nipple,Special 105 Items
Nozzle,Line Blind 19 Items
Cap,Retention,Pressure Plug 113 Items
What is an Inseparable Chain Lube Fitting? 10 Items: An Inseparable Chain Lube Fitting (FITTING,CHAIN LUBE,INSEPARABLE) is an item designed to provide lubrication to a drive chain located within a mechanical housing. The body of the fitting is inserted through the housing and is mounted to it by a flange or similar means.
Connector,Pneumatic Starter Duct 11 Items
Adapter Assembly,Filler Cap 77 Items
Steam Trap Element 14 Items
Adapter Assembly,Valve 208 Items
Adapter,Air Shift Chamber Hose 10 Items
Adapter And Flange Assembly 238 Items
Socket Assembly,Hose Flange 23 Items
What is a Tube Coupling Assembly? 254 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 48 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 122 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Tube Fitting Socket Welded Ferrule? 31 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Quick Disconnect Flanged Tee Assembly? 62 Items: A Quick Disconnect Flanged Tee Assembly (TEE ASSEMBLY,FLANGED,QUICK DISCONNECT) is an item having connections with the connections fixed at 90 degrees (1.5708 radians), to the run. The connections are designed to connect with coupling haft, cam-locking type, male/female. The side inlet may or may not be reducer fitting.
What is a Flange To Grooved Clamp Straight Adapter? 27 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 448 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Pipe To Tube Swivel Joint? 23 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Tube Fitting Compression Ferrule? 140 Items: A Tube Fitting Compression Ferrule (FERRULE,COMPRESSION,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be slipped over tubing. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled, the joint seals at the seat in a manner similar to a seat type union.
What is a Pipe Fitting Flared Collar? 26 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 70 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 147 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 492 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 141 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Pipeline Flexible Connection? 79 Items: A Pipeline Flexible Connection (CONNECTION,FLEXIBLE,PIPELINE) is a metallic fitting, with a rubber insert for flexibility and sound isolation. It usually has a flange on one end, and a pipe or pipe coupling on the other end. It may have a filter or filter element assembly.
What is a Fluid Strainer Cover? 64 Items: A Fluid Strainer Cover (COVER,FLUID STRAINER) is an item of various shapes designed as a component of a STRAINER, SEDIMENT, acting as the cover and retaining the strainer element in place. The item does not have an inlet or outlet connection. It is fastened onto the STRAINER BODY, SEDIMENT by means of bolts, clamps, or threaded. For items with inlet and/or outlet connections, see HEAD, FILTER FLUID.
What is a Tube Coupling Nut Ring? 20 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 298 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 1398 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 226 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Quick Disconnect Coupling Half Dog? 14 Items: A Quick Disconnect Coupling Half Dog (DOG,QUICK DISCONNECT COUPLING HALF) is an item used in conjunction with similar items to form a locking mechanism in a quick disconnect coupling half for locking the adapter (nipple) to the nozzle (socket) of a quick disconnect coupling assembly.
What is a Water Feeder Manifold? 12 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.
What is a Hose Fitting Tank Valve Coupling Assembly? 22 Items: A Hose Fitting Tank Valve Coupling Assembly (COUPLING ASSEMBLY,TANK VALVE,HOSE FITTING) is an item having adaptor to tank valve at one end and two or more interchangeable end connections which mate with different hose fitting types. It is used to drain dispensing tanks.

Stock Items From Supply Class 4730 Page 18 of 608

4730-01-698-5007
Pipe To Hose Straight Adapter

016985007
MS39137-1-S: RNCC: 2 | RNVC: 2
MS39137: RNCC: 4 | RNVC: 1

19 Nov 2021

4730-01-698-7961
Lubrication Fitting

016987961
SAE-J534: RNCC: 3 | RNVC: 1
J534 9003B1 Q: RNCC: 3 | RNVC: 2

9 Dec 2021

4730-01-710-9976
Pipe Coupling

017109976
SSBR300X200X: RNCC: 3 | RNVC: 2

13 Jul 2023

4730-01-711-0324
Fluid Orifice Plate

017110324
00-972543: RNCC: 3 | RNVC: 2

17 Jul 2023

4730-01-708-2646
Tube Reducer

017082646
402-0196: RNCC: 3 | RNVC: 2

25 Mar 2023

4730-00-196-0916
Pipe Bushing

001960916
AA59616BDQBCLR: RNCC: 2 | RNVC: 2
A-A-59616: RNCC: 4 | RNVC: 1
WW-P-471BDQBCLR: RNCC: 5 | RNVC: 9
WW-P-471: RNCC: 5 | RNVC: 9
WW-P-471: RNCC: 5 | RNVC: 9
A-A-59616: RNCC: 5 | RNVC: 9
A-A-59616BDQBCLR: RNCC: 5 | RNVC: 9

1 Jan 1961

4730-00-196-1963
Pipe Nipple

001961963
ASTM-B687: RNCC: 3 | RNVC: 1
B687R-9B: RNCC: 3 | RNVC: 2
MS51846-9: RNCC: 5 | RNVC: 9
MS51846-9: RNCC: 5 | RNVC: 9
113B1-8X2: RNCC: 5 | RNVC: 9
917002: RNCC: 5 | RNVC: 9
113-B.02X.32: RNCC: 5 | RNVC: 9
19R235: RNCC: 5 | RNVC: 9
802572-00: RNCC: 5 | RNVC: 9
215PNL2-20: RNCC: 5 | RNVC: 9

1 Jan 1961

4730-01-698-3327
Hydraulic System Accessories Manifold

016983327
4354453: RNCC: 3 | RNVC: 2

10 Nov 2021

4730-01-699-1920
Quick Disconnect Coupling Assembly

016991920
301382: RNCC: 3 | RNVC: 2

14 Jan 2022

4730-00-263-3703
Pipe Tee

002633703
MS51954-16: RNCC: 2 | RNVC: 2
ASME-B16.3: RNCC: 5 | RNVC: 1
WWP521: RNCC: 5 | RNVC: 9

1 Jan 1961

4730-00-263-3702
Pipe Tee

002633702
MS51954-18: RNCC: 2 | RNVC: 2
ASME-B16.3: RNCC: 5 | RNVC: 1
WWP521: RNCC: 5 | RNVC: 9

1 Jan 1961

4730-00-174-4567
Pipe Cap

001744567
MS14304-1A24: RNCC: 2 | RNVC: 2
ASME-B16.11: RNCC: 5 | RNVC: 1
MS14304-8BSV: RNCC: 5 | RNVC: 9
B16.11: RNCC: 5 | RNVC: 9
45C729-1555: RNCC: 5 | RNVC: 9
4207: RNCC: E | RNVC: 8

1 Jan 1963

4730-01-708-8192
Pipe Plug

017088192
4S40043-137A: RNCC: 3 | RNVC: 2
4S40043: RNCC: D | RNVC: 9

25 Apr 2023

4730-01-059-9344
Pipe To Tube Straight Adapter

010599344
5K9246: RNCC: 3 | RNVC: 2
5K-9246: RNCC: 5 | RNVC: 2
5K9246: RNCC: 5 | RNVC: 9

3 May 1978

4730-00-196-0866
Pipe Bushing

001960866
WWP471BDQBULK: RNCC: 2 | RNVC: 2
WW-P-471: RNCC: 4 | RNVC: 1
181-3X2-1/2: RNCC: C | RNVC: 1

1 Jan 1961

4730-00-196-1573
Pipe Nipple

001961573
ASTM-A733: RNCC: 3 | RNVC: 1
A733S-200CFG: RNCC: 3 | RNVC: 2
MS51953-200: RNCC: 5 | RNVC: 9
MS51953-200: RNCC: 5 | RNVC: 9
WWN351: RNCC: 5 | RNVC: 9
MS51953-200: RNCC: 5 | RNVC: 9
MS51953-200: RNCC: 5 | RNVC: 9

1 Jan 1961

4730-00-196-2023
Pipe Nipple

001962023
ASTM-B687: RNCC: 3 | RNVC: 1
B687R-139B: RNCC: 3 | RNVC: 2
1018030-002: RNCC: 5 | RNVC: 2
WWN351: RNCC: 5 | RNVC: 9
MS51846-139: RNCC: 5 | RNVC: 9
WWN351: RNCC: 5 | RNVC: 9

1 Jan 1961

4730-00-198-4707
Pipe Nipple

001984707
ASTM-A733: RNCC: 3 | RNVC: 1
70-811PK: RNCC: 3 | RNVC: 2
P23428V: RNCC: 3 | RNVC: 2
P401193V: RNCC: 3 | RNVC: 2
P401675V: RNCC: 3 | RNVC: 2
WWN351: RNCC: 5 | RNVC: 9
BM11352-121: RNCC: 5 | RNVC: 9

1 Jan 1963

4730-00-929-0780
Pipe Clamp Coupling

009290780
AA52598-A-11: RNCC: 2 | RNVC: 2
A-A-52598: RNCC: 4 | RNVC: 1
77A6: RNCC: 5 | RNVC: 1
C-060-077-A-T0: RNCC: 5 | RNVC: 1
AA52598-A-168.3(6): RNCC: 5 | RNVC: 9
MIL-C-10387: RNCC: 5 | RNVC: 9
KB101-6-NZ: RNCC: 5 | RNVC: 9
B101-6-NZ: RNCC: 5 | RNVC: 9
KB101-6NZ: RNCC: 5 | RNVC: 9

31 Aug 1966

4730-01-710-3175
Tube To Hose Straight Adapter

017103175
243-1588: RNCC: 3 | RNVC: 2

24 May 2023

4730-00-226-5068
Tube Cross

002265068
MS51517A4S: RNCC: 2 | RNVC: 2
MIL-DTL-18866: RNCC: 4 | RNVC: 1
4KBTXSS: RNCC: 5 | RNVC: 1
4-4-4-4 070501SA: RNCC: 5 | RNVC: 1
J514: RNCC: 5 | RNVC: 1
000-8002-373: RNCC: 5 | RNVC: 1
35967X4: RNCC: 5 | RNVC: 1
MIL-F-18866: RNCC: 5 | RNVC: 9
4KBTXSS: RNCC: 5 | RNVC: 9
4KBTXSS: RNCC: 5 | RNVC: 9

1 Jan 1963

4730-01-048-0818
Tube Tee

010480818
AP2667D101010: RNCC: 3 | RNVC: 2
AFP515D10-10-10: RNCC: 3 | RNVC: 2
NA30503-6D: RNCC: 3 | RNVC: 2
2662-10D: RNCC: 3 | RNVC: 2
110-089-6D: RNCC: 5 | RNVC: 2
31582D101010: RNCC: 5 | RNVC: 9
13202-10-10D: RNCC: 5 | RNVC: 9
2662-10D: RNCC: 5 | RNVC: 9
D9800-I-10-10-10D: RNCC: 5 | RNVC: 9
AFP515-10-10-10D: RNCC: 5 | RNVC: 9

19 Sep 1977

4730-01-011-6190
Pipe To Tube Straight Adapter

010116190
MS51819-14A: RNCC: 2 | RNVC: 2
MIL-DTL-18866: RNCC: 4 | RNVC: 1
ABA1000-12: RNCC: 5 | RNVC: 1
MIL-F-18866: RNCC: 5 | RNVC: 9
MS51819-14: RNCC: 5 | RNVC: 9
MS39206-14: RNCC: 5 | RNVC: 9
SKB35779: RNCC: C | RNVC: 1
A8205X12: RNCC: C | RNVC: 1
MS51819-44: RNCC: C | RNVC: 1
20884P11: RNCC: C | RNVC: 1

26 Oct 1975

4730-00-230-1921
Pipe To Tube Elbow

002301921
SAE-J512: RNCC: 3 | RNVC: 1
452X5: RNCC: 3 | RNVC: 2
SAE J512 5-2 040203B: RNCC: 3 | RNVC: 2
250IFHD-5-2: RNCC: 5 | RNVC: 2
J512: RNCC: 5 | RNVC: 9
902374-52: RNCC: 5 | RNVC: 9
452X5: RNCC: 5 | RNVC: 9
J512: RNCC: 5 | RNVC: 9
902374-52: RNCC: 5 | RNVC: 9
5-2 040203B: RNCC: 5 | RNVC: 9

1 Jan 1963

4730-00-231-1311
Tube To Hose Straight Adapter

002311311
AN807-10D: RNCC: 2 | RNVC: 2
AS4843/1: RNCC: 5 | RNVC: 1
AN807-10D: RNCC: 5 | RNVC: 1
AN807-10D: RNCC: 5 | RNVC: 1
AN807-10D: RNCC: 5 | RNVC: 1
AN807-10D: RNCC: 5 | RNVC: 1
AN807-10D: RNCC: 5 | RNVC: 1
AN807-10D: RNCC: 5 | RNVC: 9
AN807-10D: RNCC: 5 | RNVC: 9
MIL-F-5509: RNCC: 5 | RNVC: 9

1 Jan 1961

4730-00-193-0905
Pipe Bushing

001930905
WWP471BDQBULH: RNCC: 2 | RNVC: 2
WW-P-471: RNCC: 4 | RNVC: 1

1 Jan 1963

4730-00-818-5185
Tube Elbow

008185185
W-2082: RNCC: 3 | RNVC: 2
B16.22: RNCC: 5 | RNVC: 1
491220PC328: RNCC: 5 | RNVC: 2
W2082EF: RNCC: 5 | RNVC: 2
EA00759: RNCC: 5 | RNVC: 2
437942ITEM148: RNCC: 5 | RNVC: 2
435698PC44: RNCC: 5 | RNVC: 2
496886PC245: RNCC: 5 | RNVC: 2
9607-LT90-2-5/8: RNCC: 5 | RNVC: 9
W2082EF: RNCC: 5 | RNVC: 9

1 Jan 1962

4730-00-172-0044
Lubrication Fitting

001720044
SAE-AS35411: RNCC: 3 | RNVC: 1
AS15005-2: RNCC: 3 | RNVC: 2
AS15005-2: RNCC: 3 | RNVC: 9
AS35411: RNCC: 5 | RNVC: 1
405015: RNCC: 5 | RNVC: 1
1920C: RNCC: 5 | RNVC: 9
MS15005-2: RNCC: 5 | RNVC: 9
45F479-4005: RNCC: 5 | RNVC: 9
MS15005-2: RNCC: 5 | RNVC: 9
MS15005-2: RNCC: 5 | RNVC: 9

1 Jan 1961

4730-00-993-5031
Pipe Plug

009935031
WW-P-471: RNCC: 4 | RNVC: 1
WWP471: RNCC: 4 | RNVC: 1

1 Jan 1962

4730-01-414-3294
Tube Tee

014143294
8T8902: RNCC: 3 | RNVC: 2
8T-8902: RNCC: 5 | RNVC: 2

5 Jun 1995

4730-01-238-1895
Tube Reducer Body

012381895
SAE-AS4841: RNCC: 3 | RNVC: 1
NAS1564-16-8: RNCC: 3 | RNVC: 2
AS4841: RNCC: 5 | RNVC: 9
AS4841: RNCC: 5 | RNVC: 9

12 Aug 1986

4730-00-116-9614
Pipe Nipple

001169614
MS51846-193: RNCC: 2 | RNVC: 2
MS51846: RNCC: 4 | RNVC: 1
ASTM B687: RNCC: 5 | RNVC: 1
WW-N-351: RNCC: 5 | RNVC: 9

27 Dec 1972

4730-00-203-3967
Pipe Coupling

002033967
SAE-J514: RNCC: 3 | RNVC: 1
2046-20-20S: RNCC: 3 | RNVC: 2
11295P11: RNCC: 3 | RNVC: 2
9255X20X20: RNCC: 3 | RNVC: 2
SAE J514 20-20 140131C: RNCC: 3 | RNVC: 2
R0207-20-20: RNCC: 3 | RNVC: 2
J514: RNCC: 5 | RNVC: 1
0207-20-20: RNCC: 5 | RNVC: 2
20-20 140131C: RNCC: 5 | RNVC: 9
9255X20X20: RNCC: 5 | RNVC: 9

1 Jan 1961

4730-00-203-9725
Pipe To Tube Straight Adapter

002039725
SAE-AS4842/2: RNCC: 3 | RNVC: 1
AS896F0402: RNCC: 3 | RNVC: 2
ER816-04: RNCC: 5 | RNVC: 1
ER816-4: RNCC: 5 | RNVC: 1
ER816-4: RNCC: 5 | RNVC: 2
AS4842/2: RNCC: 5 | RNVC: 9
ER816-04: RNCC: 5 | RNVC: 9
ER816-4: RNCC: 5 | RNVC: 9
AS896: RNCC: 5 | RNVC: 9
AS896F0402: RNCC: 5 | RNVC: 9

1 Jan 1963

4730-00-204-1993
Pipe Bushing

002041993
SAE-J530: RNCC: 3 | RNVC: 1
110-B: RNCC: 3 | RNVC: 1
J530 6-2 130140B: RNCC: 3 | RNVC: 2
209P6-2: RNCC: 3 | RNVC: 2
6-2 130140B: RNCC: 3 | RNVC: 2
0102-6-2B: RNCC: 5 | RNVC: 1
3882: RNCC: 5 | RNVC: 1
23226X2: RNCC: 5 | RNVC: 1
3220X6X2: RNCC: 5 | RNVC: 1
8367807: RNCC: 5 | RNVC: 1

1 Jan 1963

4730-00-202-9200
Tube Reducer

002029200
SAE-J513: RNCC: 3 | RNVC: 1
S3402-692436ITEM: RNCC: 3 | RNVC: 2
S3402-855328ITEM: RNCC: 3 | RNVC: 2
S3402-855329ITEM: RNCC: 3 | RNVC: 2
A3494: RNCC: 3 | RNVC: 2
S3402-692431ITEM: RNCC: 3 | RNVC: 2
S3402-692432ITEM: RNCC: 3 | RNVC: 2
SAE J513 4-6 010104BA: RNCC: 3 | RNVC: 2
S3402-692433ITEM: RNCC: 3 | RNVC: 2
S3402-692434ITEM: RNCC: 3 | RNVC: 2

1 Jan 1961

4730-00-053-0234
Pipe Locknut

000530234
219148: RNCC: 2 | RNVC: 2
WW-P-471: RNCC: 4 | RNVC: 1

25 May 1967

4730-00-196-2025
Pipe Nipple

001962025
ASTM-B687: RNCC: 3 | RNVC: 1
B687R-141B: RNCC: 3 | RNVC: 2
MS51846-141: RNCC: 5 | RNVC: 9
WW-N-351: RNCC: 5 | RNVC: 9
WW-N-351TY2TABLE5: RNCC: E | RNVC: 8

1 Jan 1961

4730-01-375-8051
Pipe To Tube Straight Adapter

013758051
SAE-J512: RNCC: 3 | RNVC: 1
202049: RNCC: 3 | RNVC: 2
68C-3-4: RNCC: 3 | RNVC: 2
SAE J512 3-4 060102BA: RNCC: 3 | RNVC: 2
J512: RNCC: 5 | RNVC: 1
202049-1: RNCC: 5 | RNVC: 2
3-4 060102BA: RNCC: 5 | RNVC: 9
J512: RNCC: 5 | RNVC: 9
202049: RNCC: 5 | RNVC: 9
202049-1: RNCC: 5 | RNVC: 9

21 May 1993

4730-01-356-3551
Hose Clamp

013563551
4F7L1: RNCC: 3 | RNVC: 2
HK0913: RNCC: 5 | RNVC: 2
HK0913: RNCC: 5 | RNVC: 2
HK0913: RNCC: 5 | RNVC: 2
4F7L1: RNCC: 5 | RNVC: 2
HK0913: RNCC: 5 | RNVC: 9
137194: RNCC: 5 | RNVC: 9
HK0913: RNCC: 5 | RNVC: 9

3 Apr 1992

4730-00-193-2705
Pipe Nipple

001932705
ASTM-A733: RNCC: 3 | RNVC: 1
A733S-243CFB: RNCC: 3 | RNVC: 2
45-5750-030-040: RNCC: 5 | RNVC: 1
A733: RNCC: 5 | RNVC: 9
MS51953-243B: RNCC: 5 | RNVC: 9
P1197: RNCC: 5 | RNVC: 9
WWN351: RNCC: E | RNVC: 8

1 Jan 1961

4730-00-204-3481
Pipe Bushing

002043481
WW-P-471-BDQBUDB: RNCC: 2 | RNVC: 2
WW-P-471: RNCC: 4 | RNVC: 1
8200-9-34: RNCC: 5 | RNVC: 1
10933104-3: RNCC: 5 | RNVC: 1
4535K55: RNCC: 5 | RNVC: 1
9S9370: RNCC: 5 | RNVC: 1
MS51887-9: RNCC: 5 | RNVC: 9
4730002026669: RNCC: 5 | RNVC: 9
WWP471: RNCC: 5 | RNVC: 9
88BX5: RNCC: 5 | RNVC: 9

23 May 1969

4730-01-077-2016
Sediment Strainer Element

010772016
3008706: RNCC: 3 | RNVC: 2
3008706: RNCC: 5 | RNVC: 2
8992089: RNCC: 5 | RNVC: 2
3008706: RNCC: 5 | RNVC: 2
2910010772016: RNCC: 5 | RNVC: 9
10050806: RNCC: 6 | RNVC: 9
174298: RNCC: C | RNVC: 1

19 May 1979

4730-00-196-0908
Pipe Bushing

001960908
WWP471BEQBCKG: RNCC: 2 | RNVC: 2
WW-P-471: RNCC: 4 | RNVC: 1
MS51887-71Z: RNCC: 5 | RNVC: 9

1 Jan 1961

4730-00-194-1122
Pipe To Boss Straight Adapter

001941122
SAE-AS4842/1: RNCC: 3 | RNVC: 1
AS5194B0604: RNCC: 3 | RNVC: 2
AN816-6B: RNCC: 5 | RNVC: 1
0103-4-6B: RNCC: 5 | RNVC: 1
AN816-6B: RNCC: 5 | RNVC: 2
AN816-6B: RNCC: 5 | RNVC: 9
AN816-6B: RNCC: 5 | RNVC: 9
A2303-12-58PC4: RNCC: 5 | RNVC: 9
AN816-6B: RNCC: 5 | RNVC: 9
AN816-6B: RNCC: 5 | RNVC: 9

1 Jan 1961

4730-00-188-1849
Pipe Nipple

001881849
ASTM-A733: RNCC: 3 | RNVC: 1
A733S-16CFB: RNCC: 3 | RNVC: 2
144622: RNCC: 5 | RNVC: 2
MS51953-16B: RNCC: 5 | RNVC: 9
106201: RNCC: 5 | RNVC: 9
144622: RNCC: 5 | RNVC: 9
902466-47: RNCC: 5 | RNVC: 9

1 Jan 1963

4730-00-197-6656
Pipe Nipple

001976656
ASTM-A733: RNCC: 3 | RNVC: 1
A733S-180CFB: RNCC: 3 | RNVC: 2
MS51953-180B: RNCC: 5 | RNVC: 9
WWN351: RNCC: 5 | RNVC: 9
216346: RNCC: 5 | RNVC: 9
62343: RNCC: 5 | RNVC: 9

1 Jan 1963

4730-00-202-8433
Pipe To Hose Straight Adapter

002028433
258976PC8: RNCC: 3 | RNVC: 2
91A3-4X3-4: RNCC: 3 | RNVC: 2
501172-2: RNCC: 5 | RNVC: 2
3697073-1: RNCC: 5 | RNVC: 9
91-3/4-3/4: RNCC: E | RNVC: 8

1 Jan 1963

4730-00-207-9260
Pipe To Tube Elbow

002079260
SAE-J514: RNCC: 3 | RNVC: 1
SAE J514 5-2 070203BA: RNCC: 3 | RNVC: 2
13218E0182-25: RNCC: 3 | RNVC: 2
J514: RNCC: 5 | RNVC: 1
5DBTXB: RNCC: 5 | RNVC: 1
5DBTXB: RNCC: 5 | RNVC: 9
J514 5-2 070203BA: RNCC: 5 | RNVC: 9
5DBTXB: RNCC: 5 | RNVC: 9
5-2 070203BA: RNCC: 5 | RNVC: 9
J514: RNCC: 5 | RNVC: 9

11 Apr 1973

4730-01-710-7791
Valve Service Box

017107791
110185-19: RNCC: 3 | RNVC: 2

23 Jun 2023

4730-01-710-8450
Tube To Boss Straight Adapter

017108450
SLF3003-24: RNCC: 3 | RNVC: 2
RF9824-13: RNCC: 5 | RNVC: 2

29 Jun 2023

4730-01-577-9216
Tube To Hose Elbow

015779216
FS6809-04-04: RNCC: 3 | RNVC: 2
4535X4: RNCC: 5 | RNVC: 9

22 Sep 2009

4730-00-196-1542
Pipe Nipple

001961542
A733S-59CFG: RNCC: 2 | RNVC: 2
192073: RNCC: 5 | RNVC: 1
00311-0043: RNCC: 5 | RNVC: 1
3430: RNCC: 5 | RNVC: 1
2084-6S-4: RNCC: 5 | RNVC: 1
ASTM A733: RNCC: 5 | RNVC: 1
MS51953-59: RNCC: 5 | RNVC: 9
WWN351: RNCC: 5 | RNVC: 9
WWN351: RNCC: 5 | RNVC: 9
WWN351: RNCC: 5 | RNVC: 9

1 Jan 1961

4730-01-519-6552
Quick Disconnect Reducer

015196552
MS51895-2S: RNCC: 2 | RNVC: 2
MIL-DTL-18866: RNCC: 4 | RNVC: 1
SAE51895-2SS: RNCC: 5 | RNVC: 9
MS51895-2SS: RNCC: 5 | RNVC: 9

27 Apr 2004

4730-01-596-2191
Hose To Gas Fitting Straight Adapter

015962191
S3KCAL: RNCC: 3 | RNVC: 2
5201094-00A: RNCC: 5 | RNVC: 2
S3KCAL: RNCC: 5 | RNVC: 2

13 May 2011

4730-01-054-3760
Fluid Flow Restrictor Unit

010543760
MS18301-05AND11MOD.021DIA: RNCC: 2 | RNVC: 2
MS18301-05,11: RNCC: 2 | RNVC: 2
MS18301-05X11: RNCC: 5 | RNVC: 9
MS18301-05X11-0: RNCC: C | RNVC: 1

18 Jan 1978

4730-00-196-0861
Pipe Bushing

001960861
WWP471BEQBULE: RNCC: 2 | RNVC: 2
WW-P-471: RNCC: 4 | RNVC: 1
6577: RNCC: 5 | RNVC: 1
142269: RNCC: 5 | RNVC: 1
MS51887-89: RNCC: 5 | RNVC: 9

1 Jan 1961

4730-00-189-3021
Pipe To Tube Elbow

001893021
SAE-AS4842/1: RNCC: 3 | RNVC: 1
AS5195B0806: RNCC: 3 | RNVC: 2
MS20822-8B: RNCC: 5 | RNVC: 9
AS5195: RNCC: 5 | RNVC: 9
MS20822-8B: RNCC: 5 | RNVC: 9
MS20822-8B: RNCC: 5 | RNVC: 9
MS20822-8B: RNCC: 5 | RNVC: 9
MS20822-8B: RNCC: 5 | RNVC: 9
MS20822-8B: RNCC: 5 | RNVC: 9
MS20822-8B: RNCC: 5 | RNVC: 9

1 Jan 1963

4730-00-289-5492
Pipe Plug

002895492
AA59616AACBCK: RNCC: 2 | RNVC: 2
A-A-59616: RNCC: 4 | RNVC: 1
WWP471: RNCC: 5 | RNVC: 9
MS51884-19ZH: RNCC: 5 | RNVC: 9
WW-P-471AACBCK: RNCC: 5 | RNVC: 9
WWP501: RNCC: E | RNVC: 8

1 Jan 1963

4730-00-196-1969
Pipe Nipple

001961969
MS51846-16: RNCC: 2 | RNVC: 2
MS51846: RNCC: 4 | RNVC: 1
ASTM B687: RNCC: 5 | RNVC: 1
MS51846-16: RNCC: 5 | RNVC: 1
WWN351: RNCC: 5 | RNVC: 9

1 Jan 1961

4730-00-784-2537
Tube Reducer

007842537
MS51534A12-4: RNCC: 2 | RNVC: 2
MIL-DTL-18866: RNCC: 4 | RNVC: 1
9K6: RNCC: 5 | RNVC: 1
12-4TRTXS: RNCC: 5 | RNVC: 1
12-4TRTXS: RNCC: 5 | RNVC: 9
MS515343A12-4: RNCC: 5 | RNVC: 9
12-4TRTXS: RNCC: 5 | RNVC: 9
P69495: RNCC: 5 | RNVC: 9
883-FS-12X04: RNCC: 5 | RNVC: 9
MIL-F-18866: RNCC: 5 | RNVC: 9

1 Jan 1962

4730-01-701-4657
Pipe Flange

017014657
5A3339-57: RNCC: 3 | RNVC: 2

18 May 2022

4730-01-707-8937
Pipe To Tube Straight Adapter

017078937
Q207ACBH-M12FS-6: RNCC: 3 | RNVC: 2

1 Mar 2023

4730-01-659-3687
Pipe To Tube Elbow

016593687
SAE-J513: RNCC: 3 | RNVC: 1
SAE J513 4-4 010203BA: RNCC: 3 | RNVC: 2
4-4 010203BA: RNCC: 3 | RNVC: 9
J513: RNCC: 5 | RNVC: 1
4-4 010203BA: RNCC: 5 | RNVC: 9
J513: RNCC: 5 | RNVC: 9

22 Nov 2016

4730-01-660-1400
Tube Coupling Nut

016601400
SAE-AS21921: RNCC: 3 | RNVC: 1
MS21921-20K: RNCC: 3 | RNVC: 2
SAE-AS18280: RNCC: 5 | RNVC: 1
MS21921-20K: RNCC: 5 | RNVC: 9

6 Jan 2017

4730-01-689-7811
Hose Coupling

016897811
K-3706: RNCC: 3 | RNVC: 2
9900002164: RNCC: 5 | RNVC: 2

9 Jul 2020

4730-01-315-8250
Pipe Tee

013158250
SAE-J514: RNCC: 3 | RNVC: 1
1MMS-SS: RNCC: 3 | RNVC: 2
2090-16-16C: RNCC: 3 | RNVC: 2
SAE J514 16-16-16 140425S: RNCC: 3 | RNVC: 2
16-16-16 140425S: RNCC: 3 | RNVC: 9
J514: RNCC: 5 | RNVC: 1
1MMS-SS: RNCC: 5 | RNVC: 9
16-MMS-SS: RNCC: 5 | RNVC: 9
16-16-16 140425S: RNCC: 5 | RNVC: 9
3621 X 16: RNCC: 5 | RNVC: 9

23 Feb 1990

4730-00-287-0168
Pipe Union

002870168
ASME-B16.39: RNCC: 3 | RNVC: 1
ASMEB16.39-55-T-A: RNCC: 3 | RNVC: 2
1280-3INBLK: RNCC: 5 | RNVC: 1
7320-3IN: RNCC: 5 | RNVC: 1
1601-500BLK: RNCC: 5 | RNVC: 1
WW-U-531: RNCC: 5 | RNVC: 9
WWU53155TA: RNCC: 5 | RNVC: 9
463-3INBLK: RNCC: 5 | RNVC: 9
34-4001-3: RNCC: C | RNVC: 1
463 3IN: RNCC: E | RNVC: 8

1 Jan 1963

4730-01-708-7608
Fluid-Emulsion Spray Nozzle

017087608
7-611A21535-103: RNCC: 3 | RNVC: 2

21 Apr 2023

4730-01-708-5235
Quick Disconnect Coupling Half

017085235
GTP-1170A: RNCC: 3 | RNVC: 2
C3-25172400BC: RNCC: 5 | RNVC: 2

12 Apr 2023

4730-01-708-8512
Tube Nipple

017088512
R291P06: RNCC: 3 | RNVC: 2

27 Apr 2023

4730-01-708-5048
Machine Thread Plug

017085048
406-040-540-103: RNCC: 3 | RNVC: 2

11 Apr 2023

4730-01-708-1740
Tube Tee

017081740
PUT1/4: RNCC: 3 | RNVC: 2

20 Mar 2023

4730-01-708-3544
Quick Disconnect Coupling Half

017083544
001-002711-000: RNCC: 3 | RNVC: 2

31 Mar 2023

4730-01-710-4740
Union Thread Piece

017104740
3100516: RNCC: 3 | RNVC: 2

1 Jun 2023

4730-00-277-6380
Pipe Bushing

002776380
AN912-8S: RNCC: 2 | RNVC: 2
AN912-8S: RNCC: 5 | RNVC: 1
AN912-8S: RNCC: 5 | RNVC: 1
AS4842: RNCC: 5 | RNVC: 1
SAE-AS4842: RNCC: 5 | RNVC: 1
MIL-F-5509: RNCC: 5 | RNVC: 9
AN912-8S: RNCC: 5 | RNVC: 9
AN912-8S: RNCC: 5 | RNVC: 9
AS4842: RNCC: 5 | RNVC: 9
AN912-8S: RNCC: 5 | RNVC: 9

1 Jan 1961

4730-00-277-9642
Pipe Nipple

002779642
ASTM A733: RNCC: 3 | RNVC: 1
ASTM-A733: RNCC: 3 | RNVC: 1
A733S-24CFG: RNCC: 3 | RNVC: 2
WWN351: RNCC: 5 | RNVC: 9

1 Jan 1963

4730-00-278-3697
Boss Elbow

002783697
SAE-AS4875: RNCC: 3 | RNVC: 1
AS5191-10: RNCC: 3 | RNVC: 2
AN928-10: RNCC: 5 | RNVC: 9
AN941-10: RNCC: 5 | RNVC: 9
AN941-10: RNCC: 5 | RNVC: 9
AS4875: RNCC: 5 | RNVC: 9
AS5191-10: RNCC: 5 | RNVC: 9
AN941-10: RNCC: 5 | RNVC: 9
AS4875: RNCC: 5 | RNVC: 9
AN941-10: RNCC: 5 | RNVC: 9

1 Jan 1963

4730-00-278-2607
Sediment Strainer

002782607
WW-S-2739-C-35: RNCC: 2 | RNVC: 2
WW-S-2739: RNCC: 4 | RNVC: 1
MILS16293: RNCC: 5 | RNVC: 1
MILS16293: RNCC: 5 | RNVC: 1
M16293C35: RNCC: 5 | RNVC: 9
MILS16293: RNCC: 5 | RNVC: 9
MILS16293: RNCC: 5 | RNVC: 9
4417K26: RNCC: 5 | RNVC: 9
M534-2IN: RNCC: 5 | RNVC: 9
BGC-2 IN.: RNCC: E | RNVC: 8

1 Jan 1961

4730-00-052-7926
Pipe Bushing

000527926
WW-P-471: RNCC: 4 | RNVC: 1

1 Jan 1963

4730-00-187-4217
Pipe Plug

001874217
WW-P-471: RNCC: 4 | RNVC: 1
12205C: RNCC: 5 | RNVC: 2

1 Jan 1963

4730-00-288-9391
Tube Coupling Inverted Nut

002889391
8F8997: RNCC: 3 | RNVC: 2
67652D: RNCC: 5 | RNVC: 9
19986R1: RNCC: 5 | RNVC: 9
67652DX: RNCC: 5 | RNVC: 9
81LB3-8: RNCC: 5 | RNVC: 9
8F8997: RNCC: 5 | RNVC: 9
441392: RNCC: 5 | RNVC: 9
28737: RNCC: 5 | RNVC: 9
28737R: RNCC: 5 | RNVC: 9
67652D: RNCC: 5 | RNVC: 9

1 Jan 1963

4730-00-289-1266
Pipe Elbow

002891266
SAE-J514: RNCC: 3 | RNVC: 1
SAE J514 20-20 140230CA: RNCC: 3 | RNVC: 2
11345P11: RNCC: 5 | RNVC: 1
981522020: RNCC: 5 | RNVC: 1
3410032: RNCC: 5 | RNVC: 2
20MA20UFS: RNCC: 5 | RNVC: 9
20MA20UFS: RNCC: 5 | RNVC: 9
J514: RNCC: 5 | RNVC: 9
4730002891266: RNCC: 5 | RNVC: 9
20-20 140230CA: RNCC: 5 | RNVC: 9

1 Jan 1963

4730-00-196-0862
Pipe Bushing

001960862
WWP471BEQBULF: RNCC: 2 | RNVC: 2
WW-P-471: RNCC: 4 | RNVC: 1

1 Jan 1961

4730-00-196-0864
Pipe Bushing

001960864
WWP471BEQBULH: RNCC: 2 | RNVC: 2
WW-P-471: RNCC: 4 | RNVC: 1
64519: RNCC: 5 | RNVC: 1
MS51887-83: RNCC: 5 | RNVC: 9
64519: RNCC: 5 | RNVC: 9

1 Jan 1961

4730-00-277-6839
Pipe To Tube Straight Adapter

002776839
SAE-J512: RNCC: 3 | RNVC: 1
SAE J512 6-2 060103BA: RNCC: 3 | RNVC: 2
SAE J512 6-2 060103BA: RNCC: 3 | RNVC: 9
66C-6-2: RNCC: 5 | RNVC: 1
J512: RNCC: 5 | RNVC: 1
66X6X2: RNCC: 5 | RNVC: 1
9975911: RNCC: 5 | RNVC: 1
J512: RNCC: 5 | RNVC: 9
66X6X2: RNCC: 5 | RNVC: 9
E266X6X2: RNCC: 5 | RNVC: 9

1 Jan 1963

4730-00-277-6961
Pipe Tee

002776961
MS51954-5: RNCC: 2 | RNVC: 2
ASME-B16.3: RNCC: 5 | RNVC: 1
4730002776961: RNCC: 5 | RNVC: 9
4730002776961: RNCC: 6 | RNVC: 9

1 Jan 1961

4730-00-277-4376
Pipe To Tube Elbow

002774376
SAE-J512: RNCC: 3 | RNVC: 1
SAE J512 5-4 010203B: RNCC: 3 | RNVC: 2
J512: RNCC: 5 | RNVC: 1
150F-5-4: RNCC: 5 | RNVC: 2
A4631: RNCC: 5 | RNVC: 2
50X5X4: RNCC: 5 | RNVC: 2
50-F-05X04: RNCC: 5 | RNVC: 9
150X5X4: RNCC: 5 | RNVC: 9
J512: RNCC: 5 | RNVC: 9
SAE J512 5-4 010203B: RNCC: 5 | RNVC: 9

1 Jan 1961

4730-00-277-5040
Pipe To Tube Tee

002775040
SAE-AS4842/1: RNCC: 3 | RNVC: 1
AS5198-100810: RNCC: 3 | RNVC: 2
AS5198: RNCC: 5 | RNVC: 9
MS20826-10: RNCC: 5 | RNVC: 9
AN826-10: RNCC: 5 | RNVC: 9
AN826-10: RNCC: 5 | RNVC: 9
SAE AS4842/1: RNCC: 5 | RNVC: 9
AS5198: RNCC: 5 | RNVC: 9
LT185-5: RNCC: 5 | RNVC: 9
AN826-10: RNCC: 5 | RNVC: 9

1 Jan 1961

4730-00-277-2863
Pipe Elbow

002772863
MPD9484-3A1-1: RNCC: 3 | RNVC: 2
WWP521TYPE1: RNCC: 4 | RNVC: 1
0001311: RNCC: 5 | RNVC: 2
WWP501: RNCC: E | RNVC: 8

1 Jan 1963

4730-00-278-3563
Pipe Nipple

002783563
ASTM A733: RNCC: 3 | RNVC: 1
ASTM-A733: RNCC: 3 | RNVC: 1
WWN351: RNCC: 5 | RNVC: 9

1 Jan 1961

4730-00-278-5656
Lubrication Fitting

002785656
9000890: RNCC: 3 | RNVC: 2
7600015: RNCC: 3 | RNVC: 2
09118099: RNCC: 5 | RNVC: 2
5099: RNCC: 5 | RNVC: 2
5509: RNCC: 5 | RNVC: 2
1942461: RNCC: 5 | RNVC: 2
131349-40: RNCC: 5 | RNVC: 9
131349-40: RNCC: 5 | RNVC: 9
9118099: RNCC: 5 | RNVC: 9
9118099: RNCC: 5 | RNVC: 9

1 Jan 1963

4730-01-581-3743
Fluid Passage Bolt

015813743
1132600410: RNCC: 3 | RNVC: 2
1-13260-001-1: RNCC: 5 | RNVC: 2
1005582: RNCC: 5 | RNVC: 2
1005582: RNCC: 5 | RNVC: 9
1-13260-001-1: RNCC: 5 | RNVC: 9

13 Jan 2010

4730-01-690-8682
Tube To Boss Elbow

016908682
0109 04 10: RNCC: 3 | RNVC: 2
C3BMB4-1/8: RNCC: 3 | RNVC: 9
P001534 REV B ITEM NO 8: RNCC: C | RNVC: 1
P001534/ ITEM NO 8: RNCC: C | RNVC: 1

8 Sep 2020

4730-01-710-8056
Pipe Nipple

017108056
A-324-21 ITEM 72: RNCC: 3 | RNVC: 2
A-324-21 REV B: RNCC: D | RNVC: 9

27 Jun 2023

4730-01-711-0116
Tube Elbow

017110116
SAE-AS4409: RNCC: 3 | RNVC: 1
AS4409: RNCC: 3 | RNVC: 1
AS4409J0808: RNCC: 3 | RNVC: 2
AS4841: RNCC: 5 | RNVC: 1
SAE-AS4841: RNCC: 5 | RNVC: 1

14 Jul 2023

4730-01-709-2260
Tube To Boss Tee

017092260
STSPB231W080808: RNCC: 3 | RNVC: 2

18 May 2023

4730-01-710-5357
Tube Tee

017105357
STSPB231W200616: RNCC: 3 | RNVC: 2
STSPB231: RNCC: D | RNVC: 9

6 Jun 2023

4730-01-337-0024
Pipe Nipple

013370024
ASTM-A733: RNCC: 3 | RNVC: 1
A733S-198CFB: RNCC: 3 | RNVC: 2
A733: RNCC: 5 | RNVC: 9
MS51953-198B: RNCC: 5 | RNVC: 9

7 Apr 1991

4730-01-708-1417
Tube Tee

017081417
5058K591: RNCC: 3 | RNVC: 2

17 Mar 2023

4730-01-708-1421
Tube-Pipe Fitting Kit

017081421
116559034-21: RNCC: 3 | RNVC: 2
116559034: RNCC: D | RNVC: 9

17 Mar 2023

4730-01-706-8879
Hose Reducer

017068879
002-2044-005: RNCC: 3 | RNVC: 2
002-2044-005: RNCC: 5 | RNVC: 2

29 Dec 2022

4730-01-376-4510
Tube Tee

013764510
7D0230: RNCC: 3 | RNVC: 1
7D0230T06: RNCC: 3 | RNVC: 2
DMD10076V06: RNCC: 5 | RNVC: 2
AP11557T06: RNCC: 5 | RNVC: 2
HMD10076E06: RNCC: 5 | RNVC: 2
7D0230B: RNCC: D | RNVC: 9

3 Jun 1993

4730-01-706-6632
Tube To Boss Straight Adapter

017066632
2000909: RNCC: 3 | RNVC: 2

12 Dec 2022

4730-01-708-0520
Sediment Strainer

017080520
SRS-2.5SS: RNCC: 3 | RNVC: 2

13 Mar 2023

4730-01-706-6883
Valve Adapter Assembly

017066883
16A4623-861: RNCC: 3 | RNVC: 2

13 Dec 2022

4730-01-706-5489
Hose Elbow

017065489
550-4871: RNCC: 3 | RNVC: 2

5 Dec 2022

4730-01-706-5604
Pipe Elbow

017065604
439-1889: RNCC: 3 | RNVC: 2

6 Dec 2022

4730-01-707-9144
Tube Coupling Assembly

017079144
6L-7028: RNCC: 3 | RNVC: 2

3 Mar 2023

4730-01-708-0838
Pipe To Tube Straight Adapter

017080838
4W-7490: RNCC: 3 | RNVC: 2

15 Mar 2023

4730-01-706-5078
Pipe To Tube Straight Adapter

017065078
AN840-11S: RNCC: 2 | RNVC: 9
SAE-AS4843/2: RNCC: 5 | RNVC: 1

1 Dec 2022

4730-01-707-9525
Tube Tee

017079525
SS-6M0-3SC11: RNCC: 3 | RNVC: 2

7 Mar 2023

4730-01-707-2342
Tube Reducer

017072342
AP12102-P1008H: RNCC: 3 | RNVC: 2
AP12102: RNCC: D | RNVC: 9

24 Jan 2023

4730-01-706-0540
Pipe To Tube Straight Adapter

017060540
SS-1210-1-8RP: RNCC: 3 | RNVC: 2

27 Oct 2022

4730-01-698-9656
Hose Clamp

016989656
MS21920-45: RNCC: 2 | RNVC: 2
MIL-DTL-8783/1: RNCC: 4 | RNVC: 1
MS21920-45: RNCC: 5 | RNVC: 9

26 Dec 2021

4730-00-193-2721
Pipe Nipple

001932721
ASTM-B687: RNCC: 3 | RNVC: 1
B687R-174B: RNCC: 3 | RNVC: 2
WW-N-351: RNCC: 5 | RNVC: 9
MS51846-174: RNCC: 5 | RNVC: 9

1 Jan 1961

4730-01-413-5918
Tube Elbow

014135918
6V8721: RNCC: 3 | RNVC: 2
6V-8721: RNCC: 5 | RNVC: 2

17 May 1995

4730-01-701-0458
Quick Disconnect Coupling Assembly

017010458
KHC-1160: RNCC: 3 | RNVC: 2

25 Apr 2022

4730-01-284-2207
Pipe To Tube Tee

012842207
SAE-J514: RNCC: 3 | RNVC: 1
SAE J514 6-6-6 070424SA: RNCC: 3 | RNVC: 2
6-6-6 RBTX-SS: RNCC: 3 | RNVC: 2
6-6RBTX-SS: RNCC: 3 | RNVC: 2
6-6-6 070424SA: RNCC: 3 | RNVC: 9
J514: RNCC: 5 | RNVC: 1
6-6RBTX-SS: RNCC: 5 | RNVC: 9
6-6-6 070424SA: RNCC: 5 | RNVC: 9
J514: RNCC: 5 | RNVC: 9
3308474: RNCC: 7 | RNVC: 1

19 Aug 1988

4730-01-699-8225
Hose Mender

016998225
3622-06-05: RNCC: 3 | RNVC: 2
79014872: RNCC: 5 | RNVC: 2
7479014872: RNCC: 5 | RNVC: 2

28 Feb 2022

4730-01-701-3378
Quick Disconnect Coupling Half

017013378
21SBTF08MVX: RNCC: 3 | RNVC: 2
MEP-00004184: RNCC: 5 | RNVC: 2
193622542: RNCC: 5 | RNVC: 2
10AB-73: RNCC: 5 | RNVC: 2
MEP-00004185: RNCC: 5 | RNVC: 2

11 May 2022

4730-01-429-9747
Tube Elbow

014299747
6V8076: RNCC: 3 | RNVC: 2
6V-8076: RNCC: 5 | RNVC: 2

22 Apr 1996

4730-01-281-1609
Tube To Boss Tee

012811609
SAE-J1453/3: RNCC: 3 | RNVC: 1
FF1861T-2424S: RNCC: 3 | RNVC: 2
24S50L0S: RNCC: 3 | RNVC: 2
SAE J1453-3 24-24-24 520429C: RNCC: 3 | RNVC: 2
J1453: RNCC: 5 | RNVC: 1
7-447-242404: RNCC: 5 | RNVC: 2
24-24-24 520429C: RNCC: 5 | RNVC: 9
24S50L0S: RNCC: 5 | RNVC: 9
24-24-24 520429C: RNCC: 5 | RNVC: 9
J1453: RNCC: 5 | RNVC: 9

17 Jun 1988

4730-01-253-4589
Flange To Hose Elbow

012534589
328-9145: RNCC: 3 | RNVC: 2
5S9614: RNCC: 5 | RNVC: 9

18 Apr 1987

4730-01-225-2225
Quick Disconnect Coupling Half

012252225
633A-1-1/4SS: RNCC: 3 | RNVC: 9
633A-0730: RNCC: 5 | RNVC: 2
633A-1-1/4SS: RNCC: 5 | RNVC: 2
125A-SS: RNCC: 5 | RNVC: 2
10037476: RNCC: 5 | RNVC: 2
633A-0730: RNCC: 5 | RNVC: 9
633A: RNCC: 5 | RNVC: 9

30 Jan 1986

4730-01-540-4214
Tube Elbow

015404214
SAE J1453-3: RNCC: 3 | RNVC: 1
SAE-J1453/3: RNCC: 3 | RNVC: 1
SAE J1453-3 12-12 520221SA: RNCC: 3 | RNVC: 2
SAE J1453-3 12-12 520221SA: RNCC: 5 | RNVC: 9
12-12 520221SA: RNCC: 5 | RNVC: 9
SAE J1453-3: RNCC: 5 | RNVC: 9

18 May 2006

4730-01-652-2395
Tube To Boss Tee

016522395
SAE-J1453/3: RNCC: 3 | RNVC: 1
SAE J1453-3 16-16-16 520429C: RNCC: 3 | RNVC: 2
J1453-3: RNCC: 5 | RNVC: 9
J1453-1: RNCC: 5 | RNVC: 9
SAE J1453-3 16-16-16 520429C: RNCC: 5 | RNVC: 9
J1453-3: RNCC: 5 | RNVC: 9
J1453-1: RNCC: 5 | RNVC: 9

13 Feb 2016

4730-01-128-9095
Tube Elbow

011289095
A-600-8-0001: RNCC: 3 | RNVC: 2
A600-8-0003: RNCC: 3 | RNVC: 2
A-600-8-0003: RNCC: 5 | RNVC: 2
7M494A6-1: RNCC: 5 | RNVC: 9

27 Mar 1982

4730-01-543-7561
A Hydraulic Fitting

015437561
B94548-4: RNCC: 3 | RNVC: 2
A51986-04: RNCC: 5 | RNVC: 9
AS1986-04: RNCC: 5 | RNVC: 9
B94548-4: RNCC: 5 | RNVC: 9

21 Sep 2006

4730-01-117-9512
Pipe To Tube Straight Adapter

011179512
MS51500A10S: RNCC: 2 | RNVC: 2
MIL-DTL-18866: RNCC: 4 | RNVC: 1
000-8002-471: RNCC: 5 | RNVC: 1
10FBTX-SS: RNCC: 5 | RNVC: 1
10-8 070102SA: RNCC: 5 | RNVC: 1
J514: RNCC: 5 | RNVC: 1
010-004699: RNCC: 5 | RNVC: 1
10FBTX-SS: RNCC: 5 | RNVC: 9
35217-10-10: RNCC: 5 | RNVC: 9
10-8 070102SA: RNCC: 5 | RNVC: 9

24 Aug 1981

4730-01-251-4338
Pipe To Tube Straight Adapter

012514338
SAE-J514: RNCC: 3 | RNVC: 1
SAE J514 16-16 080102SA: RNCC: 3 | RNVC: 2
16-1MC-16SS: RNCC: 5 | RNVC: 1
16-16FBZ-SS: RNCC: 5 | RNVC: 1
533942-76: RNCC: 5 | RNVC: 1
SS-1610-1-16: RNCC: 5 | RNVC: 1
ISSD16MC16: RNCC: 5 | RNVC: 2
J514: RNCC: 5 | RNVC: 9
16-16 080102SA: RNCC: 5 | RNVC: 9
SAE J514 16-16 080102SA: RNCC: 5 | RNVC: 9

19 Mar 1987

4730-01-706-5879
Pipe To Tube Straight Adapter

017065879
528-1246: RNCC: 3 | RNVC: 2
A00987: RNCC: 5 | RNVC: 2

7 Dec 2022

4730-01-476-5019
Pipe Flange

014765019
6V0400: RNCC: 3 | RNVC: 2
A03227: RNCC: 5 | RNVC: 2
6V-0400: RNCC: 5 | RNVC: 9

14 Jul 2000

4730-01-556-0894
Pipe To Tube Straight Adapter

015560894
GE25SREDOMDCF: RNCC: 3 | RNVC: 2
A231004000219: RNCC: 5 | RNVC: 2
GE25SREDOMDCF: RNCC: 5 | RNVC: 2
1575039: RNCC: 5 | RNVC: 2
GE25SREDOMDCF: RNCC: 5 | RNVC: 2
GE25SREDOMDCF: RNCC: 5 | RNVC: 2
69.ASHW0-3845: RNCC: 5 | RNVC: 2
354A01: RNCC: 5 | RNVC: 2
GE25SREDOMDCF: RNCC: 5 | RNVC: 2
4730901843: RNCC: 5 | RNVC: 2

24 Sep 2007

4730-01-709-2336
Hose Clamp

017092336
BACC10BN175L5ME: RNCC: 3 | RNVC: 2
BACC10BN175L5ME: RNCC: 3 | RNVC: 2
BACC10BN175L5ME: RNCC: 3 | RNVC: 2
BACC10BN175L5ME: RNCC: 5 | RNVC: 9
BACC10BN175L5ME: RNCC: C | RNVC: 1
BACC10BN: RNCC: D | RNVC: 9

18 May 2023

4730-01-709-2527
Tube Elbow

017092527
J4-4M3-XP97: RNCC: 3 | RNVC: 2
AS2013656: RNCC: 5 | RNVC: 2
4213AS0117-1: RNCC: 5 | RNVC: 2
2013656: RNCC: 5 | RNVC: 2

19 May 2023

4730-01-710-4535
Pipe Nipple

017104535
801-6405504-FIND-NO-20-5: RNCC: 3 | RNVC: 2
DF330769-FIND-NO-20-5: RNCC: D | RNVC: 9
6405504: RNCC: D | RNVC: 9

31 May 2023

4730-01-710-5210
Tube Coupling Inverted Nut

017105210
YVA BONNET: RNCC: 3 | RNVC: 2

5 Jun 2023

4730-01-710-6328
Union Nut

017106328
801-6405504-FN-11-5: RNCC: 3 | RNVC: 2
DF330769-FN-11-5: RNCC: C | RNVC: 1
211025893: RNCC: C | RNVC: 1
6405504 REV. C, SHEET 6A/16: RNCC: D | RNVC: 9

12 Jun 2023

4730-01-710-6329
Union Tailpiece

017106329
801-6405504-FN-16-6: RNCC: 3 | RNVC: 2
211041036: RNCC: C | RNVC: 1
DF330769-FN-16-6: RNCC: C | RNVC: 1
6405504 REV. C, SHEET 6A/16: RNCC: D | RNVC: 9

12 Jun 2023

4730-01-204-2284
Tube To Boss Straight Adapter

012042284
R45116T-0806W: RNCC: 3 | RNVC: 2
AP302T0806H: RNCC: 5 | RNVC: 2
AFP2040T0806W: RNCC: 5 | RNVC: 2
ST7M236T0806W: RNCC: 5 | RNVC: 9
AE16111-8-6W: RNCC: 5 | RNVC: 9
ST7M236T0806W: RNCC: 5 | RNVC: 9
ST7M236T0806W: RNCC: 7 | RNVC: 2
R45116T-0806W: RNCC: C | RNVC: 1
ST7M236: RNCC: D | RNVC: 9

23 Mar 1985

4730-00-684-6028
Tube To Boss Tee

006846028
SAE-J514: RNCC: 3 | RNVC: 1
SAE J514 8-8-8 080429SA: RNCC: 3 | RNVC: 2
8S5BUSS: RNCC: 5 | RNVC: 1
9100605: RNCC: 5 | RNVC: 1
J514 8-8-8 080429SA: RNCC: 5 | RNVC: 9
MS51841-6SS: RNCC: 5 | RNVC: 9
J514: RNCC: 5 | RNVC: 9
8S5BUSS: RNCC: 5 | RNVC: 9
8-8-8 080429SA: RNCC: 5 | RNVC: 9
J514: RNCC: 5 | RNVC: 9

1 Jan 1963

4730-00-196-0930
Pipe Bushing

001960930
MS14315-1XA: RNCC: 2 | RNVC: 2
WWP460: RNCC: 4 | RNVC: 1
3880: RNCC: 5 | RNVC: 1
922800: RNCC: 5 | RNVC: 1
0922800-8: RNCC: 5 | RNVC: 1
B4RB2: RNCC: 5 | RNVC: 1
112877: RNCC: 5 | RNVC: 1
112877: RNCC: 5 | RNVC: 1
019-00004-47: RNCC: 5 | RNVC: 1
S-970-B: RNCC: 5 | RNVC: 1

14 Sep 1966

4730-01-106-8287
Pipe Reducer

011068287
SAE-J514: RNCC: 3 | RNVC: 1
SAE J514 20-16 140137C: RNCC: 3 | RNVC: 2
2083-20-16S: RNCC: 3 | RNVC: 2
12330337: RNCC: 3 | RNVC: 2
0101-16-20: RNCC: 3 | RNVC: 2
11/4X1FF-S: RNCC: 3 | RNVC: 2
1 1/4X1FF-S: RNCC: 3 | RNVC: 2
J514: RNCC: 5 | RNVC: 1
BML62714: RNCC: 5 | RNVC: 2
10019656: RNCC: 5 | RNVC: 2

25 Jan 1981

4730-01-700-0711
Pipe Elbow

017000711
M24202TY1,8IN,45LRLTBW: RNCC: 2 | RNVC: 2
MIL-DTL-24202: RNCC: 4 | RNVC: 1
41-4EL30BW7: RNCC: 5 | RNVC: 1
15-08-2753A: RNCC: 5 | RNVC: 9
15-08-2753: RNCC: 5 | RNVC: 9
4677429-0F32: RNCC: 5 | RNVC: 9
508-4677429-FND32: RNCC: C | RNVC: 1
845-4677428: RNCC: D | RNVC: 9
2621-040-01: RNCC: D | RNVC: 9
508-4677429: RNCC: D | RNVC: 9

15 Mar 2022

4730-01-707-4004
Pipe To Tube Elbow

017074004
Q189PTCR-12-12-M16: RNCC: 3 | RNVC: 2

31 Jan 2023

4730-01-350-9037
Hose To Boss Straight Adapter

013509037
4-190885-3/8-8: RNCC: 3 | RNVC: 2
4-190885-3/8-8: RNCC: 3 | RNVC: 9
MIL-DTL-24787/3: RNCC: 4 | RNVC: 1
MIL-F-24787: RNCC: 5 | RNVC: 1
CMC-4-5603-3/8-08: RNCC: 5 | RNVC: 2
MIL-F-24787/3: RNCC: 5 | RNVC: 9

25 Dec 1991

4730-01-706-1400
Quick Disconnect Coupling Half

017061400
D3101MMF08ALA11: RNCC: 3 | RNVC: 2
D3101: RNCC: D | RNVC: 9

3 Nov 2022

4730-01-706-2385
Hydraulic Manifold Assembly

017062385
23418-400-1: RNCC: 3 | RNVC: 2
23418-400: RNCC: D | RNVC: 9

9 Nov 2022

4730-01-706-2377
Hose Cross

017062377
H032502: RNCC: 3 | RNVC: 2
H032502: RNCC: D | RNVC: 9

9 Nov 2022

4730-01-706-1639
Quick-Disconnect Nipple

017061639
52702-942: RNCC: 3 | RNVC: 2

4 Nov 2022

4730-01-706-8686
Tube Elbow

017068686
8600289-005: RNCC: 3 | RNVC: 1
8600289D6: RNCC: 5 | RNVC: 1
SAE J1453/1D6: RNCC: 5 | RNVC: 1
8598301-03 FN61: RNCC: 5 | RNVC: 1
8598301-03 FN61D6: RNCC: 5 | RNVC: 2
8600289-005D6: RNCC: 5 | RNVC: 2
SAE J1453/1: RNCC: 7 | RNVC: 1
8600289: RNCC: D | RNVC: 9

27 Dec 2022

4730-01-706-8294
Flange To Hose Straight Adapter

017068294
EF-1546A3-2-40: RNCC: 3 | RNVC: 2

21 Dec 2022

4730-01-706-0272
Hydraulic System Accessories Manifold

017060272
130009-230: RNCC: 3 | RNVC: 2

26 Oct 2022

4730-01-706-0493
Tube Elbow

017060493
NGE510GK10R45: RNCC: 3 | RNVC: 2
R51002T10: RNCC: 5 | RNVC: 2
NGE510GK: RNCC: D | RNVC: 9

27 Oct 2022

4730-01-706-0474
Tube Elbow

017060474
NGE510GP0808: RNCC: 3 | RNVC: 2
DASC027T0808: RNCC: 5 | RNVC: 2
L51003T08: RNCC: 5 | RNVC: 2
NGE510GP: RNCC: D | RNVC: 9

27 Oct 2022

4730-01-706-0730
Pipe To Boss Straight Adapter

017060730
LC276-10-16AE: RNCC: 3 | RNVC: 2
LC276-10-16: RNCC: 5 | RNVC: 2
LC276: RNCC: D | RNVC: 9

28 Oct 2022

4730-01-706-0975
Tube Reducer

017060975
AS5174W2016: RNCC: 3 | RNVC: 2

1 Nov 2022

4730-01-705-7988
Tube Elbow

017057988
NGE510GP0810: RNCC: 3 | RNVC: 2
R51053T0810: RNCC: 5 | RNVC: 2
NGE510GP: RNCC: D | RNVC: 9

13 Oct 2022

4730-01-705-8137
Pipe Reducer

017058137
CTS 02400 5400: RNCC: 3 | RNVC: 2
A22749: RNCC: 5 | RNVC: 2
3698010: RNCC: 5 | RNVC: 2

14 Oct 2022

4730-01-707-3848
Flowmeter Tube Connector Assembly

017073848
219178: RNCC: 3 | RNVC: 2

31 Jan 2023

4730-01-705-7845
Pipe Tee

017057845
PVC004011000HD: RNCC: 3 | RNVC: 2
641165: RNCC: 5 | RNVC: 2

12 Oct 2022

4730-01-706-5256
Pipe To Tube Straight Adapter

017065256
803-5184176 1-1/4PC2: RNCC: 3 | RNVC: 2
803-5184176 PIECE 2: RNCC: C | RNVC: 1
5184176: RNCC: D | RNVC: 9

2 Dec 2022

4730-01-706-7578
Threaded Rod Coupling

017067578
133: RNCC: 3 | RNVC: 2
61298-00189/FIND NO. 29: RNCC: D | RNVC: 9

16 Dec 2022

4730-01-697-4134
Tube To Boss Straight Adapter

016974134
SAE-J1453/3: RNCC: 3 | RNVC: 1
SAE J1453-3 4-4 520120S: RNCC: 3 | RNVC: 2
SAE J1453-3: RNCC: 5 | RNVC: 1
4-4 520120S: RNCC: 5 | RNVC: 9

17 Sep 2021

4730-01-705-9244
Fluid Orifice Plate

017059244
B001200P01008-31: RNCC: 3 | RNVC: 2
LC212-08A: RNCC: 5 | RNVC: 2
B001200P01008: RNCC: D | RNVC: 9

21 Oct 2022

4730-01-705-7834
Pipe Reducer

017057834
PVC001021000HD: RNCC: 3 | RNVC: 2
203391383: RNCC: 5 | RNVC: 2

12 Oct 2022

4730-01-709-0773
Tube Nipple

017090773
8 WLO-SS: RNCC: 3 | RNVC: 2

10 May 2023

4730-01-707-5178
Pipe Flange

017075178
R31AB3-0500F0: RNCC: 3 | RNVC: 2
7766: RNCC: D | RNVC: 9

7 Feb 2023

4730-01-706-5185
Sediment Strainer

017065185
32FFY-B2062PML-GBB-BA7: RNCC: 3 | RNVC: 2
AL90000(B62): RNCC: D | RNVC: 9

2 Dec 2022

4730-01-705-8219
Boss Tee

017058219
LC010-12AE: RNCC: 3 | RNVC: 2
LC010-12: RNCC: 5 | RNVC: 2
LC010: RNCC: D | RNVC: 9

14 Oct 2022

4730-01-706-0186
Tube Coupling Nut

017060186
AS1734D16: RNCC: 3 | RNVC: 2

25 Oct 2022

4730-01-706-0259
Tube Coupling

017060259
MR54040T-2120A: RNCC: 3 | RNVC: 2
GF503BH20A: RNCC: 5 | RNVC: 2
GF503BH: RNCC: D | RNVC: 9

26 Oct 2022

4730-01-706-4734
Tube Tee

017064734
AS4410W060606: RNCC: 3 | RNVC: 2

29 Nov 2022

4730-01-705-7377
Tube Elbow

017057377
NGE510GP0812: RNCC: 3 | RNVC: 2
R51053T0812: RNCC: 5 | RNVC: 2
NGE510GP: RNCC: D | RNVC: 9

7 Oct 2022

4730-01-705-7402
Tube Tee

017057402
T0-2.5BN: RNCC: 3 | RNVC: 2

7 Oct 2022

4730-01-708-7603
Tube Elbow

017087603
20 C5OLO-22 C0873: RNCC: 3 | RNVC: 2

21 Apr 2023

4730-01-707-0975
Pipe Tee

017070975
7055621: RNCC: 3 | RNVC: 2

17 Jan 2023

4730-01-705-6387
Tube Coupling

017056387
7NG0081-8: RNCC: 3 | RNVC: 2
L51021T08: RNCC: 5 | RNVC: 2
7NG0081: RNCC: D | RNVC: 9

30 Sep 2022

4730-01-707-2457
Tube Elbow

017072457
7NG0009-0406: RNCC: 3 | RNVC: 2
DASC026T0406: RNCC: 5 | RNVC: 2
L51052T0406: RNCC: 5 | RNVC: 2
7NG0009: RNCC: D | RNVC: 9

24 Jan 2023

4730-01-705-6546
Fluid Flow Restrictor Unit

017056546
801-8617176 ASSY-123A: RNCC: 3 | RNVC: 1
2655-561-02 ASSY-123A: RNCC: 5 | RNVC: 1
2655-561-02 ASSY-123AL1: RNCC: 5 | RNVC: 2
801-8617176 ASSY-123AL1: RNCC: 5 | RNVC: 2
801-8617176L1: RNCC: 5 | RNVC: 2
801-8617176: RNCC: D | RNVC: 9

30 Sep 2022

4730-01-705-7166
Tube Tee

017057166
R50030T20: RNCC: 3 | RNVC: 2
R50030T: RNCC: D | RNVC: 9

6 Oct 2022

4730-01-705-7780
Tube Tee

017057780
LC1420-121212AE: RNCC: 3 | RNVC: 2
LC1420: RNCC: D | RNVC: 9

12 Oct 2022

4730-01-705-5263
Tube Tee

017055263
L50082T030404: RNCC: 3 | RNVC: 2
L50082T: RNCC: D | RNVC: 9

23 Sep 2022

4730-01-708-3841
Hose To Boss Straight Adapter

017083841
CMC-4-5601-1-1/2-32: RNCC: 3 | RNVC: 2
4-1909111-1/2-32: RNCC: 5 | RNVC: 2
CMC-5601: RNCC: D | RNVC: 9

3 Apr 2023

4730-01-706-3653
Quick Disconnect Coupling Half

017063653
AE75201G: RNCC: 3 | RNVC: 2

18 Nov 2022

4730-01-707-1655
Bulkhead Hose Connector

017071655
LC639-10AE: RNCC: 3 | RNVC: 2
LC639: RNCC: D | RNVC: 9

20 Jan 2023

4730-01-707-1711
Drainage Pipe Tee-Y

017071711
7052773: RNCC: 3 | RNVC: 2

20 Jan 2023

4730-01-708-4020
Pipeline Flexible Spacer

017084020
512-6985078-4: RNCC: 3 | RNVC: 2
H512-0106-4: RNCC: 5 | RNVC: 2
512-6985078: RNCC: D | RNVC: 9

4 Apr 2023

4730-01-706-4439
Pipe Elbow

017064439
820-2177965-CS-04(3IN-TANGENT): RNCC: 3 | RNVC: 1

28 Nov 2022

4730-01-707-2999
Threaded Tube Fitting Plug

017072999
8600291-011: RNCC: 3 | RNVC: 1
8598317-03 FN58: RNCC: 5 | RNVC: 1
SAE J1453/1D6: RNCC: 5 | RNVC: 1
8598317-03 FN58D6: RNCC: 5 | RNVC: 2
8600291-011D6: RNCC: 5 | RNVC: 2
SAE J1453/1: RNCC: 7 | RNVC: 1

26 Jan 2023

4730-01-706-4535
Pipe Reinforcement Saddle

017064535
0500176136: RNCC: 3 | RNVC: 2
5LWU2: RNCC: 5 | RNVC: 2

28 Nov 2022

4730-01-708-9072
Pipe Plug

017089072
EP-0008339: RNCC: 3 | RNVC: 2
EP-0008335: RNCC: D | RNVC: 9

1 May 2023

4730-01-708-6361
Pipe Flange

017086361
14003409: RNCC: 3 | RNVC: 2

14 Apr 2023

4730-01-706-4710
Tube Tee

017064710
L50079T080802: RNCC: 3 | RNVC: 2
L50079T: RNCC: D | RNVC: 9

29 Nov 2022

4730-01-707-3433
Hose Tee

017073433
7052776: RNCC: 3 | RNVC: 2

28 Jan 2023

4730-01-706-3136
Tube Tee

017063136
8600291-009: RNCC: 3 | RNVC: 1
8600291-009D6: RNCC: 5 | RNVC: 2

15 Nov 2022

4730-01-706-3695
Hose Coupling

017063695
707001-1208: RNCC: 3 | RNVC: 2

18 Nov 2022

4730-01-707-1065
Hydraulic System Accessories Manifold

017071065
201330720-10: RNCC: 3 | RNVC: 2
201330720: RNCC: 7 | RNVC: 2

17 Jan 2023

4730-01-706-3550
Union Tailpiece

017063550
8600289-023: RNCC: 3 | RNVC: 1
SAE J1453/1D6: RNCC: 5 | RNVC: 1
8600289D6: RNCC: 5 | RNVC: 1
8598301-03 FN70: RNCC: 5 | RNVC: 1
8600289-023D6: RNCC: 5 | RNVC: 2
8598301-03 FN70D6: RNCC: 5 | RNVC: 2
SAE J1453/1: RNCC: 7 | RNVC: 1
8600289: RNCC: D | RNVC: 9

17 Nov 2022

4730-00-878-4199
Pipe Reducer

008784199
SAE-J530: RNCC: 3 | RNVC: 1
SAE J530 6-4 130137B: RNCC: 3 | RNVC: 2
121872: RNCC: 5 | RNVC: 2
BF332564: RNCC: 5 | RNVC: 2
69.BD000-2223: RNCC: 5 | RNVC: 2
ABF127: RNCC: 5 | RNVC: 2
BF332564: RNCC: 5 | RNVC: 2
J530: RNCC: 5 | RNVC: 9
J530: RNCC: 5 | RNVC: 9
U10BC: RNCC: 5 | RNVC: 9

1 Jan 1960

4730-01-711-0024
Hose Clamp

017110024
SAE J1508-E32: RNCC: 3 | RNVC: 2

13 Jul 2023

4730-01-020-7187
Swivel Flange To Hose Elbow

010207187
M24787/1,TY-FL,CL-II,GR-X,-40: RNCC: 2 | RNVC: 2
MIL-DTL-24787/1: RNCC: 4 | RNVC: 1
FC9637-3240-189: RNCC: 5 | RNVC: 1
FC9637-189: RNCC: 5 | RNVC: 9
MIL-H-24136: RNCC: 5 | RNVC: 9

3 May 1976

4730-01-705-5164
Tube Tee

017055164
AS5972T060604: RNCC: 3 | RNVC: 2
SAE-AS5972: RNCC: 5 | RNVC: 1
T060604: RNCC: 5 | RNVC: 2

23 Sep 2022

4730-01-209-2933
Hose Mender

012092933
3V3263: RNCC: 3 | RNVC: 2
3V-3263: RNCC: 5 | RNVC: 2
88352-21: RNCC: 5 | RNVC: 9

27 May 1985

4730-01-241-4116
Pipe Elbow

012414116
4639707 PEICE F-18: RNCC: 3 | RNVC: 2
216-4639707 ITEM F-18: RNCC: 5 | RNVC: 2
15-25-6126: RNCC: 5 | RNVC: 2
216-4639707PCF18: RNCC: 5 | RNVC: 9
87788-1901 PEICE F-18: RNCC: 5 | RNVC: 9
LLCZ24428: RNCC: 5 | RNVC: 9

25 Sep 1986

4730-01-710-8240
Pipe Nipple

017108240
A-324-21 ITEM 73: RNCC: 3 | RNVC: 2
A-324-21 REV B ITEM 73: RNCC: C | RNVC: 1
A-324-21: RNCC: D | RNVC: 9

28 Jun 2023

4730-00-127-4504
Tube To Boss Tee

001274504
SAE-AS1003: RNCC: 3 | RNVC: 1
AS1003F040403: RNCC: 3 | RNVC: 2
SAE-AS18280: RNCC: 5 | RNVC: 1
ER804-040403: RNCC: 5 | RNVC: 9
AS18280: RNCC: 5 | RNVC: 9
AS1003-040403: RNCC: 5 | RNVC: 9
AS1003F040403: RNCC: 5 | RNVC: 9
AS18280: RNCC: 5 | RNVC: 9

4 Jan 1973

4730-00-952-7527
Pipe Bushing

009527527
WWP471: RNCC: 4 | RNVC: 1
WW-P-471: RNCC: 4 | RNVC: 1

1 Jan 1962

4730-01-698-2652
Tube To Boss Straight Adapter

016982652
8-4F42EDMLOS: RNCC: 3 | RNVC: 2

5 Nov 2021

4730-01-701-8636
Pipe To Tube Straight Adapter

017018636
AS896K0404: RNCC: 3 | RNVC: 2
AS896: RNCC: 5 | RNVC: 1
262-8592594 ITEM 43: RNCC: C | RNVC: 1
8592594: RNCC: D | RNVC: 9

14 Jun 2022

4730-00-640-6585
Pipe Bushing

006406585
WWP471: RNCC: 4 | RNVC: 1
WW-P-471: RNCC: 4 | RNVC: 1

1 Jan 1963

4730-01-162-0112
Flange To Pipe Elbow

011620112
8N6849: RNCC: 3 | RNVC: 2
8N-6849: RNCC: 5 | RNVC: 2

13 Sep 1983

4730-01-486-0480
Pipe Coupling

014860480
101-0104: RNCC: 3 | RNVC: 2
01-0104: RNCC: 5 | RNVC: 9

18 Jun 2001

4730-00-277-5103
Tube To Boss Tee

002775103
SAE-AS4841: RNCC: 3 | RNVC: 1
AS1035R040404: RNCC: 3 | RNVC: 2
AN824-4S: RNCC: 5 | RNVC: 9
AN824-4S: RNCC: 5 | RNVC: 9
AS4841: RNCC: 5 | RNVC: 9
AN824-4S: RNCC: 5 | RNVC: 9
AN824-4S: RNCC: 5 | RNVC: 9
AN824-4S: RNCC: 5 | RNVC: 9
AS1035R040404: RNCC: 5 | RNVC: 9
AN824-4S: RNCC: 5 | RNVC: 9

1 Jan 1961

4730-00-201-3228
Tube To Boss Tee

002013228
SAE-AS18280: RNCC: 3 | RNVC: 1
AS1001J060604: RNCC: 3 | RNVC: 2
AS1001J060604: RNCC: 3 | RNVC: 9
AS1001: RNCC: 5 | RNVC: 1
ER783J060604: RNCC: 5 | RNVC: 9
CVC4260J060604: RNCC: 5 | RNVC: 9
AS1001: RNCC: 5 | RNVC: 9
110-087-4C: RNCC: 5 | RNVC: 9
AX1001J060604: RNCC: 5 | RNVC: 9
AFP509C060604: RNCC: 5 | RNVC: 9

31 Mar 1973

4730-00-825-8684
Pipe Elbow

008258684
452E: RNCC: 3 | RNVC: 1
1702: RNCC: E | RNVC: 8

1 Jan 1962

4730-00-825-9693
Pipe Nipple

008259693
ASTM B 687: RNCC: 3 | RNVC: 1
ASTM-B687: RNCC: 3 | RNVC: 1
WW-N-351: RNCC: 5 | RNVC: 9

1 Jan 1962

4730-00-679-4499
Sediment Strainer

006794499
8350689: RNCC: 3 | RNVC: 2
25206794499: RNCC: 5 | RNVC: 9
2520006794499: RNCC: 6 | RNVC: 9
25206794499: RNCC: 6 | RNVC: 9

1 Jan 1963

4730-01-697-8713
Quick Disconnect Coupling Half

016978713
FEM-752-12FP: RNCC: 3 | RNVC: 2

15 Oct 2021

4730-00-963-5841
Swivel Flange To Hose Elbow

009635841
M24787/1FLX-IOO24135/04-64X-0350: RNCC: 2 | RNVC: 2
MIL-DTL-24787/1: RNCC: 4 | RNVC: 1
MIL-F-24787/1: RNCC: 5 | RNVC: 9
M24787/1,TYFL,CLI,GRIV,64 3 1/2: RNCC: 5 | RNVC: 9
M24787/1,3.5IN-64,TY-FL,CLI,GRIV: RNCC: 5 | RNVC: 9
265-190758-3 1/2-64: RNCC: 5 | RNVC: 9
90EF-449B1-3.5-64: RNCC: 5 | RNVC: 9

1 Jan 1963

4730-01-353-8475
Tube To Boss Elbow

013538475
SAE-J1453/3: RNCC: 3 | RNVC: 1
38H1413: RNCC: 3 | RNVC: 2
FF1868T1-0612S: RNCC: 3 | RNVC: 2
SAE J1453-3 6-12 520220C: RNCC: 3 | RNVC: 2
6-12C5L-S: RNCC: 5 | RNVC: 9
6-12 520220C: RNCC: 5 | RNVC: 9
6-12C5L-S: RNCC: 5 | RNVC: 9
6-12 520220C: RNCC: 5 | RNVC: 9
38H1413: RNCC: 5 | RNVC: 9

19 Feb 1992

4730-01-421-5253
Pipe Flange

014215253
16FOPX: RNCC: 3 | RNVC: 9
16-FOPX: RNCC: 5 | RNVC: 2

9 Nov 1995

4730-00-051-8394
Pipe Bushing

000518394
WW-P-471: RNCC: 4 | RNVC: 1

1 Jan 1963

4730-01-559-3619
Hose To Boss Straight Adapter

015593619
4315X12X8: RNCC: 3 | RNVC: 2
FF1852T1208S: RNCC: 5 | RNVC: 2

14 Dec 2007

4730-01-697-4377
Tube To Boss Straight Adapter

016974377
SAE-J1453/3: RNCC: 3 | RNVC: 1
SAE J1453-3 16-16 520120S: RNCC: 3 | RNVC: 2
SAE J1453-3: RNCC: 5 | RNVC: 1
16-16 520120S: RNCC: 5 | RNVC: 9

20 Sep 2021

4730-01-655-1888
Tube To Boss Straight Adapter

016551888
SAE J1926-1: RNCC: 3 | RNVC: 1
SAE J1926 24-16 090136C: RNCC: 3 | RNVC: 2
SAE J1926 24-16 090136C: RNCC: 3 | RNVC: 9

20 May 2016

4730-01-689-0803
Tube To Boss Elbow

016890803
SAE J1453-3: RNCC: 3 | RNVC: 1
SAE-J1453/3: RNCC: 3 | RNVC: 1
SAE J1453-3 24-24 520220C: RNCC: 3 | RNVC: 2
24-24-520220C: RNCC: 5 | RNVC: 9
J1453-3-24-24-520220C: RNCC: 5 | RNVC: 9
J1453-3-24-24-520220C: RNCC: 5 | RNVC: 9
24-24-520220C: RNCC: 5 | RNVC: 9
SAE-J1453-3-24-24-520220C: RNCC: 5 | RNVC: 9

4 Jun 2020

4730-01-199-5713
Hose To Boss Straight Adapter

011995713
MIL-F-24787/3 GR VI TY C CL: RNCC: 2 | RNVC: 2
MIL-DTL-24787/3: RNCC: 4 | RNVC: 1
FJ9366-2424-41: RNCC: 5 | RNVC: 1
MIL-F-24787: RNCC: 5 | RNVC: 9

23 Jan 1985

4730-00-928-6581
Swivel Flange To Hose Straight Adapter

009286581
M24787/1FXX-IVO24135/04-64X-04XX: RNCC: 2 | RNVC: 2
MIL-DTL-24787/1: RNCC: 4 | RNVC: 1
EF-449A3-4-64: RNCC: 5 | RNVC: 1
117-190655-4-64: RNCC: 5 | RNVC: 9
265-190655-4-64: RNCC: 5 | RNVC: 9
MIL-F-24787/1: RNCC: 5 | RNVC: 9
M24787/1,TY-F,CL-IV,GR-IV,-64 4: RNCC: 5 | RNVC: 9
M24787/1,4IN-64,TYF,CL-IV,GRIV: RNCC: 5 | RNVC: 9

26 Aug 1966

4730-01-708-4990
Hose Coupling

017084990
1099703: RNCC: 3 | RNVC: 2

10 Apr 2023

4730-01-710-2669
Tube Reducer

017102669
D10405D0810: RNCC: 3 | RNVC: 2

20 May 2023

4730-01-709-2537
Tube Elbow

017092537
D10186D0406: RNCC: 3 | RNVC: 2

19 May 2023

4730-01-710-4617
Pipe Union

017104617
5273653: RNCC: 3 | RNVC: 2

31 May 2023

4730-01-710-5033
Pipe Reducer

017105033
13-LM-0034-108: RNCC: 3 | RNVC: 2

3 Jun 2023

4730-01-710-2665
Tube Elbow

017102665
D10416-0406: RNCC: 3 | RNVC: 2

20 May 2023

4730-01-709-0964
Machine Thread Plug

017090964
131529: RNCC: 3 | RNVC: 2

11 May 2023

4730-00-727-9002
Tube Tee

007279002
MS51853-11P: RNCC: 2 | RNVC: 2
MIL-DTL-18866: RNCC: 4 | RNVC: 1
8S6BUS: RNCC: 5 | RNVC: 1
MS51853-12P: RNCC: 5 | RNVC: 9
8S6BUS: RNCC: 5 | RNVC: 9
8S6BUS: RNCC: 5 | RNVC: 9
MS51853: RNCC: 5 | RNVC: 9
38-8-8 080433SA: RNCC: C | RNVC: 1
1856BU-SS: RNCC: C | RNVC: 1
18S67SS: RNCC: C | RNVC: 1

1 Jan 1961

4730-01-710-2663
Tube Elbow

017102663
D10416D0406: RNCC: 3 | RNVC: 2

20 May 2023

4730-01-709-2106
Tube To Boss Straight Adapter

017092106
J514 4-2 080103S: RNCC: 3 | RNVC: 2
SAE J514 4-2 080103S: RNCC: 3 | RNVC: 2
J514: RNCC: 5 | RNVC: 1
4-2 080103S: RNCC: 5 | RNVC: 2

17 May 2023

4730-01-709-2461
Tube To Boss Straight Adapter

017092461
SAE J514 6-6 081720S: RNCC: 3 | RNVC: 2
J514: RNCC: 5 | RNVC: 1
6-6 081720S: RNCC: 5 | RNVC: 2

19 May 2023

4730-01-698-7521
Hose Clamp

016987521
30051-0150: RNCC: 3 | RNVC: 2
30051-0150: RNCC: 5 | RNVC: 9

6 Dec 2021

4730-01-710-2728
Union Nut

017102728
801-6405504-FIND-NO-11-2: RNCC: 3 | RNVC: 2
DF330769-FIND-NO-11-2: RNCC: C | RNVC: 1
801-6405504: RNCC: D | RNVC: 9

20 May 2023

4730-01-710-3448
Pipe Flange

017103448
12647474: RNCC: 3 | RNVC: 2

26 May 2023

4730-00-619-9362
Pipe To Tube Tee

006199362
SAE-J512: RNCC: 3 | RNVC: 1
SAE J512 5-2-5 010424B: RNCC: 3 | RNVC: 2
140642: RNCC: 5 | RNVC: 1
51X5: RNCC: 5 | RNVC: 1
MS39164-4: RNCC: 5 | RNVC: 9
0913043: RNCC: 5 | RNVC: 9
0913043-6: RNCC: 5 | RNVC: 9
51X5: RNCC: 5 | RNVC: 9
5-2 010424B: RNCC: 5 | RNVC: 9
SAE J512: RNCC: 5 | RNVC: 9

22 Feb 1975

4730-00-640-6062
Pipe Plug

006406062
WWP471: RNCC: 4 | RNVC: 1
WW-P-471: RNCC: 4 | RNVC: 1

1 Jan 1963

4730-00-640-6906
Pipe Plug

006406906
WWP471: RNCC: 4 | RNVC: 1
WW-P-471: RNCC: 4 | RNVC: 1

1 Jan 1963

4730-00-278-5816
Fluid Pressure Line Multiple Connector

002785816
AN778-6: RNCC: 2 | RNVC: 2
AN778-6: RNCC: 5 | RNVC: 1
AN778-6: RNCC: 5 | RNVC: 1
AN778-6: RNCC: 5 | RNVC: 1
AN778-6: RNCC: 5 | RNVC: 1
AS4875/1: RNCC: 5 | RNVC: 1
AN778-6: RNCC: 5 | RNVC: 1
MIL-F-5509: RNCC: 5 | RNVC: 9
AN778-6: RNCC: 5 | RNVC: 9
AS4875/1: RNCC: 5 | RNVC: 9

1 Jan 1963

4730-00-287-0001
Pipe Plug

002870001
WW-P-471: RNCC: 4 | RNVC: 1
WWP471: RNCC: 4 | RNVC: 1

1 Jan 1963

4730-00-221-2142
Pipe Plug

002212142
SAE-AS4863: RNCC: 3 | RNVC: 1
AS4863S10: RNCC: 3 | RNVC: 2
802815-050: RNCC: 5 | RNVC: 2
1833082: RNCC: 5 | RNVC: 9
MS20913-10S: RNCC: 5 | RNVC: 9
70080-10S: RNCC: 5 | RNVC: 9
171SH0409000: RNCC: 5 | RNVC: 9
AS4863: RNCC: 5 | RNVC: 9
AS4863: RNCC: 5 | RNVC: 9
AS4863S10: RNCC: 5 | RNVC: 9

1 Jan 1963

4730-00-203-2828
Pipe Bushing

002032828
WWP471BDQBCJD: RNCC: 2 | RNVC: 2
WW-P-471: RNCC: 4 | RNVC: 1
WWP471TYPE2STYLECCLASS1: RNCC: 5 | RNVC: 9

1 Jan 1963

4730-00-092-3822
Tube Reducer Body

000923822
SAE-AS4841: RNCC: 3 | RNVC: 1
NAS1564-12-8: RNCC: 3 | RNVC: 2

6 Dec 1972

4730-00-793-2697
Pipe To Tube Elbow

007932697
4-4 DBZ-SS: RNCC: 3 | RNVC: 2
ISSD4FE4: RNCC: 3 | RNVC: 2
4LF4-316: RNCC: 5 | RNVC: 2
CV0088-001: RNCC: 5 | RNVC: 2
SS4-2FE-4: RNCC: 5 | RNVC: 2
SS-400-8-4: RNCC: 5 | RNVC: 9
4LF4-316: RNCC: 5 | RNVC: 9
400-8-4-316: RNCC: 5 | RNVC: 9
770FSS1-4X1-4: RNCC: 5 | RNVC: 9
I4-4FE-SS: RNCC: 5 | RNVC: 9

1 Jan 1962

4730-01-693-4886
Electrical Special Purpose Cable Assembly

016934886
801-7549599-ASSY-123-17: RNCC: 3 | RNVC: 2
2633-561-02-ASSY-123-17: RNCC: 5 | RNVC: 2
801-7549599: RNCC: D | RNVC: 9

17 Feb 2021

4730-01-652-2351
Tube Tee

016522351
SAE-J1453/3: RNCC: 3 | RNVC: 1
SAE J1453-3 8-8-8 520959CN: RNCC: 3 | RNVC: 2
SAE J1453-3 8-8-8 520959CN: RNCC: 3 | RNVC: 9

13 Feb 2016

4730-00-933-0706
Tube To Hose Straight Adapter

009330706
MS27386-12C: RNCC: 2 | RNVC: 2
MIL-DTL-27272: RNCC: 4 | RNVC: 1
148-30346-12: RNCC: 5 | RNVC: 1
MS27386-12C: RNCC: 5 | RNVC: 2
MS27386-12C: RNCC: 5 | RNVC: 9
MS27386-12C: RNCC: 5 | RNVC: 9
G65018-12: RNCC: 5 | RNVC: 9
MS27386-12C: RNCC: 5 | RNVC: 9
MIL-F-27272: RNCC: 5 | RNVC: 9

1 Mar 1967

4730-01-083-8862
Pipe Nipple

010838862
51262-8-1875-SV: RNCC: 3 | RNVC: 2
51262-8-1875: RNCC: 3 | RNVC: 9
51262-8-1875: RNCC: 5 | RNVC: 9
51262-8-1875: RNCC: 5 | RNVC: 9

3 Oct 1979

4730-01-700-4296
Pipe Nipple

017004296
8048-300: RNCC: 3 | RNVC: 2
12638404: RNCC: D | RNVC: 9

29 Mar 2022

4730-01-700-4865
Pipe To Tube Tee

017004865
11E-7: RNCC: 3 | RNVC: 2

30 Mar 2022

4730-01-699-8549
Pipe To Tube Straight Adapter

016998549
MS51819-44SS: RNCC: 2 | RNVC: 2
MIL-DTL-18866: RNCC: 4 | RNVC: 1

2 Mar 2022

4730-01-701-0082
Pipe Flange

017010082
06351-08336-101: RNCC: 3 | RNVC: 2
06351-08336: RNCC: D | RNVC: 9

22 Apr 2022

4730-01-701-0114
Reducing Tube Coupling Nut

017010114
STSPB804V08: RNCC: 3 | RNVC: 2
STSPB804: RNCC: D | RNVC: 9

22 Apr 2022

4730-01-699-9393
Anchor And Reinforcement Pipe Clamp

016999393
48218: RNCC: 3 | RNVC: 9

8 Mar 2022

4730-01-699-8900
Pipe To Tube Straight Adapter

016998900
CDP4018: RNCC: 3 | RNVC: 2
NPN: RNCC: D | RNVC: 9

4 Mar 2022

4730-01-699-7728
Pipe Elbow

016997728
820-2177965-CN-60(3.5INTAN): RNCC: 3 | RNVC: 1
215-4455008F-102: RNCC: 5 | RNVC: 1

24 Feb 2022

4730-01-700-4869
Pipe To Hose Elbow

017004869
IDA000551RET: RNCC: 3 | RNVC: 2
9880-0402: RNCC: 3 | RNVC: 2

30 Mar 2022

4730-01-702-0666
Fluid Flow Restrictor

017020666
12596700-6: RNCC: 3 | RNVC: 2

21 Jun 2022

4730-01-700-2814
Hose Mender

017002814
A-A-52403-12: RNCC: 2 | RNVC: 2
A-A-52403: RNCC: 4 | RNVC: 1
5357K77: RNCC: 5 | RNVC: 1

22 Mar 2022

4730-01-699-7181
Pipe To Tube Straight Adapter

016997181
1731002208G: RNCC: 3 | RNVC: 9
5-13-10745-1: RNCC: 5 | RNVC: 2
5-13-10745: RNCC: 7 | RNVC: 2

22 Feb 2022

4730-01-699-7383
Sediment Strainer

016997383
M6710379: RNCC: 3 | RNVC: 2
MM133015: RNCC: 5 | RNVC: 2
6.0-792FHH-D-15685-01 / IT 4: RNCC: D | RNVC: 9

23 Feb 2022

4730-01-700-3582
Tube Coupling Assembly

017003582
9-1-1402-2-AL: RNCC: 3 | RNVC: 2
9-1-1402: RNCC: D | RNVC: 9

24 Mar 2022

4730-01-699-7533
Tube Elbow

016997533
J514: RNCC: 3 | RNVC: 1
SAE J514 10-10 070321S: RNCC: 3 | RNVC: 2
J514 10-10 070321S: RNCC: 5 | RNVC: 2
10-10 070321S: RNCC: 5 | RNVC: 2

23 Feb 2022

4730-01-699-7559
Fluid Passage Bolt

016997559
3595373: RNCC: 3 | RNVC: 2

24 Feb 2022

4730-01-701-4659
Pipe Tee

017014659
7721184-101: RNCC: 3 | RNVC: 2

18 May 2022

4730-01-699-7699
Pipe To Tube Tee

016997699
8-8-6 070427S: RNCC: 3 | RNVC: 2
SAE J514: RNCC: 5 | RNVC: 1
SAE J514 8-8-6 070427: RNCC: 5 | RNVC: 2

24 Feb 2022

4730-01-700-9355
Tube Elbow

017009355
5360L-15: RNCC: 3 | RNVC: 2
17-61245-02: RNCC: 7 | RNVC: 2
17-61245: RNCC: D | RNVC: 9

20 Apr 2022

4730-01-699-7509
Pipe Nipple

016997509
030-00195: RNCC: 3 | RNVC: 2
5-13-11168-1: RNCC: 5 | RNVC: 2
5-13-11168: RNCC: 7 | RNVC: 2

23 Feb 2022

4730-01-701-5153
Filler Port

017015153
300267-105: RNCC: 3 | RNVC: 2

20 May 2022

4730-01-701-0903
Blind Pipe Flange

017010903
316532: RNCC: 3 | RNVC: 2
306810 ITEM 119: RNCC: C | RNVC: 1
306810: RNCC: D | RNVC: 9

26 Apr 2022

4730-01-699-5286
Moisture Trap

016995286
PMCP2XLP01850X01600: RNCC: 3 | RNVC: 2
220002-02: RNCC: D | RNVC: 9

7 Feb 2022

4730-01-699-5290
Moisture Trap

016995290
PMCP2XLP05150X03500: RNCC: 3 | RNVC: 2
220002-02: RNCC: D | RNVC: 9

7 Feb 2022

4730-01-699-5289
Moisture Trap

016995289
PMCP2XLP02250X02500: RNCC: 3 | RNVC: 2
220002-02: RNCC: D | RNVC: 9

7 Feb 2022

4730-01-699-6357
Fluid Passage Bolt

016996357
48634: RNCC: 3 | RNVC: 2

15 Feb 2022

4730-01-701-3065
Fluid Passage Bolt

017013065
348-8082: RNCC: 3 | RNVC: 2
N1F8SJ LCU138 SHEET 8 REF NO 1: RNCC: C | RNVC: 1

10 May 2022

4730-01-701-3622
Tube To Boss Straight Adapter

017013622
6464-10-10-O: RNCC: 3 | RNVC: 2

12 May 2022

4730-01-701-9157
Quick Disconnect Cap

017019157
8827673: RNCC: 3 | RNVC: 2
8827673 REV: RNCC: D | RNVC: 9

15 Jun 2022

4730-01-701-3274
Hydraulic Manifold Assembly

017013274
4952941: RNCC: 3 | RNVC: 2
4952941: RNCC: 3 | RNVC: 2

10 May 2022

4730-01-701-8252
Pipe To Tube Straight Adapter

017018252
4-4 GBU-SS: RNCC: 3 | RNVC: 2
190099A0607: RNCC: D | RNVC: 9

10 Jun 2022

4730-01-701-8122
Tube Coupling

017018122
52245K537: RNCC: 3 | RNVC: 2
8287633/PC35: RNCC: D | RNVC: 9

9 Jun 2022

4730-01-699-5976
Pipe Plug

016995976
984793: RNCC: 3 | RNVC: 2

11 Feb 2022

4730-01-701-2576
Boss Tee

017012576
AS4133V080808: RNCC: 3 | RNVC: 2

5 May 2022

4730-01-701-2134
Tube Coupling

017012134
836-030C: RNCC: 3 | RNVC: 2

4 May 2022

4730-01-701-1282
Threaded Tube Fitting Plug

017011282
AS5170W18: RNCC: 3 | RNVC: 2
AS5170: RNCC: 5 | RNVC: 1
SAE AS5170W18: RNCC: 5 | RNVC: 2

28 Apr 2022

4730-01-699-4778
Fluid Passage Bolt

016994778
21184847: RNCC: 3 | RNVC: 2

2 Feb 2022

4730-01-700-0207
Machine Thread Plug

017000207
02/912468: RNCC: 3 | RNVC: 2

11 Mar 2022

4730-01-698-8658
Tube Coupling

016988658
AM4FC: RNCC: 3 | RNVC: 2

16 Dec 2021

4730-01-698-8778
Swivel Retaining Pipe Flange

016988778
00-848541: RNCC: 3 | RNVC: 2

16 Dec 2021

4730-01-698-8808
Pipeline Adapter

016988808
091-705H: RNCC: 3 | RNVC: 2
1063934: RNCC: 5 | RNVC: 2

16 Dec 2021

4730-01-697-6718
Tube Reducer

016976718
W01065: RNCC: 3 | RNVC: 2

4 Oct 2021

4730-01-697-7179
Tube Elbow

016977179
NGE510GK06R45: RNCC: 3 | RNVC: 2
L51002T06: RNCC: 5 | RNVC: 2
NGE510GK: RNCC: D | RNVC: 9

6 Oct 2021

4730-01-698-0657
Tube To Boss Tee

016980657
AS1033W101010: RNCC: 3 | RNVC: 2
SAE AS1033: RNCC: 5 | RNVC: 2

27 Oct 2021

4730-01-698-9211
Tube Coupling Swage Ferrule

016989211
AS4734C64: RNCC: 3 | RNVC: 2

21 Dec 2021

4730-01-698-0541
Pipe Union

016980541
AS8461T04: RNCC: 3 | RNVC: 2
SAE- AS8461: RNCC: 5 | RNVC: 2

26 Oct 2021

4730-01-698-0509
Pipe To Tube Elbow

016980509
12M26C8OMXS V0894: RNCC: 3 | RNVC: 2
21545202: RNCC: 5 | RNVC: 2
21545201: RNCC: D | RNVC: 9

26 Oct 2021

4730-01-698-3737
Pipe Plug

016983737
2-32004-8: RNCC: 3 | RNVC: 2

12 Nov 2021

4730-01-698-4732
Tube Elbow

016984732
AS4407W0404L: RNCC: 3 | RNVC: 2
SAE-AS4407: RNCC: 5 | RNVC: 1

18 Nov 2021

4730-01-699-3417
Tube Reducer

016993417
8287601: RNCC: 3 | RNVC: 2
8288641/ ITEM 6: RNCC: C | RNVC: 1
8288641: RNCC: D | RNVC: 9

25 Jan 2022

4730-01-699-3155
Pipe Tee

016993155
150-5968: RNCC: 3 | RNVC: 2

24 Jan 2022

4730-01-699-3721
Machine Thread Plug

016993721
21171958: RNCC: 3 | RNVC: 2
21171958: RNCC: 5 | RNVC: 2
2171958: RNCC: 5 | RNVC: 9
17-61206: RNCC: 7 | RNVC: 2

26 Jan 2022

4730-01-699-4089
Hose To Grooved Clamp Coupling Straight Adapter

016994089
FAAK-07-0100: RNCC: 3 | RNVC: 2
GHMT075B: RNCC: 3 | RNVC: 2
FAAK-07-0100: RNCC: D | RNVC: 9

28 Jan 2022

4730-01-699-3767
Straight Tubing Connector

016993767
58490-002: RNCC: 3 | RNVC: 2

26 Jan 2022

4730-01-700-5346
Hose Elbow

017005346
119773-13510: RNCC: 3 | RNVC: 2
104120331: RNCC: 5 | RNVC: 2
119773-13510: RNCC: 5 | RNVC: 2

31 Mar 2022

NSN 4730-00-265-6825 002656825 FITTING,LUBRICATION

4730-00-265-6825
Lubrication Fitting

002656825
A94-1: RNCC: 3 | RNVC: 2
5031: RNCC: 3 | RNVC: 2
3MR8: RNCC: 3 | RNVC: 2
126098: RNCC: 3 | RNVC: 2
5226117: RNCC: 5 | RNVC: 2
126098: RNCC: 5 | RNVC: 2
Q3990: RNCC: 5 | RNVC: 9
W4025C: RNCC: 5 | RNVC: 9
3MR8: RNCC: 5 | RNVC: 9
Q3990: RNCC: 5 | RNVC: 9

1 Jan 1963

4730-01-699-1934
Pipe Elbow

016991934
9261-1000: RNCC: 3 | RNVC: 2

14 Jan 2022

4730-01-698-6427
Pipe Tee

016986427
AS85421/3T040404: RNCC: 3 | RNVC: 2

1 Dec 2021

4730-01-698-2661
Tube Elbow

016982661
P8EU6: RNCC: 3 | RNVC: 2

5 Nov 2021

4730-01-698-1749
Quick Disconnect Elbow

016981749
5298548: RNCC: 3 | RNVC: 2

2 Nov 2021

4730-01-699-1189
Tube Tee

016991189
SS12TEE: RNCC: 3 | RNVC: 2

10 Jan 2022

4730-01-698-5829
Pipe Elbow

016985829
9806-012: RNCC: 3 | RNVC: 2

26 Nov 2021

4730-01-699-0159
Lubrication Fitting

016990159
74A325019-2004: RNCC: 3 | RNVC: 2
74A325019-2004: RNCC: 5 | RNVC: 2

3 Jan 2022

4730-01-694-4189
Tube To Boss Tee

016944189
SAE-AS18280: RNCC: 3 | RNVC: 1
AS1003J080608: RNCC: 3 | RNVC: 2
AS1003: RNCC: 5 | RNVC: 1
AS1003J080608: RNCC: 5 | RNVC: 9

1 Apr 2021

4730-01-229-9677
Tube Tee

012299677
FER1551J040406: RNCC: 3 | RNVC: 2
LER804J040406: RNCC: 3 | RNVC: 2
APX804J040406: RNCC: 3 | RNVC: 2
ER804J040406: RNCC: 3 | RNVC: 2
BACT16AX040406J: RNCC: 3 | RNVC: 2
FER1551040406J: RNCC: 5 | RNVC: 2
APX804040406J: RNCC: 5 | RNVC: 2
ER804040406J: RNCC: 5 | RNVC: 2
AFP329J040406: RNCC: 5 | RNVC: 2
LER804040406J: RNCC: 5 | RNVC: 2

8 Apr 1986

4730-01-703-2512
Sediment Strainer

017032512
3.0-781SS-D-20846-01: RNCC: 3 | RNVC: 2
3.0-781SS-D-20846-01/REV 1: RNCC: D | RNVC: 9

25 Aug 2022

4730-01-698-3302
Lubrication Fitting

016983302
842-349437-46: RNCC: 3 | RNVC: 2

10 Nov 2021

4730-01-703-3511
Pipe Elbow

017033511
31542: RNCC: 3 | RNVC: 2
5-13-11188-1: RNCC: 7 | RNVC: 2
5-13-11188: RNCC: D | RNVC: 9

31 Aug 2022

4730-01-701-1441
Pipe Expansion Joint

017011441
W6 0802 600000 ITEM 10: RNCC: 3 | RNVC: 2

29 Apr 2022

4730-01-698-3078
Pipe Cap

016983078
842-349437-44: RNCC: 3 | RNVC: 2

9 Nov 2021

4730-01-705-3653
Hydraulic System Accessories Manifold

017053653
13706447-1: RNCC: 3 | RNVC: 2
13706447: RNCC: D | RNVC: 9

16 Sep 2022

4730-01-701-3980
Pipe Flange

017013980
284T0589-3: RNCC: 3 | RNVC: 1

16 May 2022

4730-01-698-3084
Lubrication Fitting

016983084
842-349437-22: RNCC: 3 | RNVC: 2

9 Nov 2021

4730-01-590-8736
Tube Fitting Flared Sleeve

015908736
SAE-AS1654: RNCC: 3 | RNVC: 1
AS1654A24: RNCC: 3 | RNVC: 2
AS1654A24: RNCC: 3 | RNVC: 9

29 Dec 2010

4730-01-625-9296
Hose Coupling

016259296
22899.13655: RNCC: 3 | RNVC: 2
33057: RNCC: 5 | RNVC: 2

20 Feb 2014

4730-01-710-3547
Tube Elbow

017103547
031-00118: RNCC: 3 | RNVC: 2

30 May 2023

4730-01-710-5174
Hydraulic Manifold Assembly

017105174
556-8845875-RHS-1306: RNCC: 3 | RNVC: 2
218129971: RNCC: 5 | RNVC: 2
LOA053697-RHS-1306: RNCC: 5 | RNVC: 2
8845875: RNCC: D | RNVC: 9

5 Jun 2023

4730-01-710-6028
Sediment Strainer Body

017106028
801-6556602-PC-212: RNCC: 3 | RNVC: 2
2621-601-15-PC-212: RNCC: C | RNVC: 1

9 Jun 2023

4730-01-709-2102
Hose Reducer

017092102
14-002800: RNCC: 3 | RNVC: 2

17 May 2023

4730-01-051-8974
Tube Tee

010518974
AFD344R060606: RNCC: 3 | RNVC: 2
BACT16AZ060606R: RNCC: 3 | RNVC: 2
BACT16AZ060606D: RNCC: 3 | RNVC: 2
W30834060606R: RNCC: 3 | RNVC: 2
CAP1015-060606R: RNCC: 3 | RNVC: 2
AFP344R060606: RNCC: 3 | RNVC: 2
AFP344D060606: RNCC: 5 | RNVC: 2
2652726-060606D: RNCC: 5 | RNVC: 9
CAP1015-060606D: RNCC: 5 | RNVC: 9
DB0 T 16AZ: RNCC: 5 | RNVC: 9

7 Dec 1977

4730-01-710-2575
Sediment Strainer Element

017102575
BSKT.25MNL.BSAB1000: RNCC: 3 | RNVC: 2

19 May 2023

4730-01-710-5827
Flange Elbow

017105827
112149140: RNCC: 3 | RNVC: 2

8 Jun 2023

4730-01-708-7916
Fluid-Emulsion Spray Nozzle

017087916
7-611A21535-107: RNCC: 3 | RNVC: 2

24 Apr 2023

4730-01-708-7664
Pipe Exhaust Head

017087664
92308-04200-041: RNCC: 3 | RNVC: 2

21 Apr 2023

4730-01-708-8332
Hose To Gas Fitting Straight Adapter

017088332
8M0182334: RNCC: 3 | RNVC: 2
8M0182334: RNCC: 5 | RNVC: 2

26 Apr 2023

4730-01-708-4192
Boss Nipple

017084192
MS21900K5: RNCC: 3 | RNVC: 2
AS21900 REV D: RNCC: D | RNVC: 9

4 Apr 2023

4730-01-710-4767
Air Line Manifold

017104767
IM9042-02: RNCC: 3 | RNVC: 2

1 Jun 2023

4730-00-737-3251
Fluid Pressure Line Multiple Connector

007373251
7373251: RNCC: 3 | RNVC: 2
112-10327: RNCC: 3 | RNVC: 9
112-10327: RNCC: 5 | RNVC: 2
452M2: RNCC: 5 | RNVC: 9
4720007373251: RNCC: 6 | RNVC: 9
4730007373251: RNCC: 6 | RNVC: 9

1 Jan 1963

4730-00-640-6829
Pipe Flange

006406829
CS4730-0108A038DJ: RNCC: 3 | RNVC: 2
MIL-PRF-20042E: RNCC: 4 | RNVC: 1
MIL-PRF-20042: RNCC: 4 | RNVC: 1
MILF20042: RNCC: 5 | RNVC: 9
MILF20042: RNCC: 5 | RNVC: 9
MILF20042: RNCC: 5 | RNVC: 9

1 Jan 1961

4730-01-669-0672
Boss Nipple

016690672
SAE-AS18280: RNCC: 3 | RNVC: 1
AS5230W2020: RNCC: 3 | RNVC: 2
AS5230W2020: RNCC: 3 | RNVC: 9

19 Dec 2017

4730-01-652-2361
Swivel Flange To Tube Elbow

016522361
SAE-J1453/3: RNCC: 3 | RNVC: 1
SAE J1453-3 12-12 520281CN: RNCC: 3 | RNVC: 2
SAE J1453-3 12-12 520281CN: RNCC: 3 | RNVC: 9

13 Feb 2016

4730-01-707-3888
Pipe Tee

017073888
Q1224P-8-M16: RNCC: 3 | RNVC: 2

31 Jan 2023

4730-01-698-7820
Tube Nipple

016987820
10-6F42EDMLOS: RNCC: 3 | RNVC: 2

8 Dec 2021

4730-01-702-9471
Tube Tee

017029471
Q1225P-4G-M12-4: RNCC: 3 | RNVC: 2

9 Aug 2022

4730-01-707-4196
Flange To Boss Elbow

017074196
Q369PTCR-12-M16: RNCC: 3 | RNVC: 2

1 Feb 2023

4730-01-199-7893
Hose Elbow

011997893
M24787/5-24,TY-D,GR-VI: RNCC: 2 | RNVC: 2
MIL-DTL-24787/5: RNCC: 4 | RNVC: 1
FJ9343-2424-41: RNCC: 5 | RNVC: 1
CMC-51-8260-24-24: RNCC: 5 | RNVC: 1
MIL-F-24787/5: RNCC: 5 | RNVC: 9
MIL-F-24787: RNCC: 5 | RNVC: 9
MIL-F-24787/5-24 GR VI TY D: RNCC: 5 | RNVC: 9

25 Jan 1985

4730-01-698-8809
Pipe Cap

016988809
842-349439-35: RNCC: 3 | RNVC: 2

16 Dec 2021

4730-01-698-9414
Pipe Elbow

016989414
AS4138T1216: RNCC: 3 | RNVC: 2

22 Dec 2021

4730-01-703-0838
Split Flange Parts Kit

017030838
2-PSA-PLS-0009-KIT J: RNCC: 3 | RNVC: 2
2-PSA-PLS-0009-KIT J: RNCC: 5 | RNVC: 2
243-8728882 FIND ITEM 18: RNCC: C | RNVC: 1
243-8728882: RNCC: D | RNVC: 9

16 Aug 2022

4730-01-703-2178
Split Flange Parts Kit

017032178
2-PSA-PLS-0007-KIT G: RNCC: 3 | RNVC: 2
243-8728882 FN0014: RNCC: D | RNVC: 9

24 Aug 2022

4730-01-703-2420
Pipe Tee

017032420
PVC004001000HD: RNCC: 3 | RNVC: 2

25 Aug 2022

4730-01-703-3420
Adapter Bushing

017033420
A-51219-N: RNCC: 3 | RNVC: 2
310-1-040: RNCC: 5 | RNVC: 2

31 Aug 2022

4730-01-703-3448
Pipe To Boss Straight Adapter

017033448
1/8X1/8F4OHGS: RNCC: 3 | RNVC: 2
12683411: RNCC: 7 | RNVC: 2

31 Aug 2022

4730-01-703-4274
Tube To Boss Elbow

017034274
12-8 C5OX-SS FKM: RNCC: 3 | RNVC: 2

7 Sep 2022

4730-01-705-3577
Pipe Union

017053577
AS5969T1212: RNCC: 3 | RNVC: 2

15 Sep 2022

4730-01-092-5606
Swivel Flange To Hose Elbow

010925606
FC7751-1010-189: RNCC: 3 | RNVC: 2
MIL-DTL-24787/1: RNCC: 4 | RNVC: 1
19-00-9583: RNCC: 5 | RNVC: 2
MIL-H-24136: RNCC: 5 | RNVC: 9
MIL-F-24787/1 GRIX TYFL CLII: RNCC: 5 | RNVC: 9
MIL-F-24787/1: RNCC: 5 | RNVC: 9
FC7751-189: RNCC: D | RNVC: 9

28 Mar 1980

4730-00-231-2432
Pipe Cap

002312432
B16.3: RNCC: 3 | RNVC: 1
3.5 NPS CAP 150 CLASS ZN PLATE: RNCC: 5 | RNVC: 1
WWP521: RNCC: 5 | RNVC: 9

1 Jan 1961

4730-00-905-6223
Tube To Boss Tee

009056223
SAE-AS4841: RNCC: 3 | RNVC: 1
AS1035D060404: RNCC: 3 | RNVC: 2
AS1035D060404: RNCC: 3 | RNVC: 9
7M136D06-04-04: RNCC: 5 | RNVC: 2
7M136D06-04-04: RNCC: 5 | RNVC: 2
7M136D06-04-04: RNCC: 5 | RNVC: 2
7M136D06-04-04: RNCC: 5 | RNVC: 2
201023D06-04-04: RNCC: 5 | RNVC: 2
7M136D06-04-04: RNCC: 5 | RNVC: 2
MCD824D06-04-04: RNCC: 5 | RNVC: 9

1 Jan 1960

4730-01-664-1921
Pipe To Tube Straight Adapter

016641921
MS51816-30SB: RNCC: 2 | RNVC: 2
MS51816: RNCC: 4 | RNVC: 1
MIL-DTL-18866: RNCC: 5 | RNVC: 9
MS51816-30SS: RNCC: 5 | RNVC: 9

9 Jun 2017

4730-00-023-4875
Tube Reducer Body

000234875
SAE-AS4841: RNCC: 3 | RNVC: 1
NAS1564K16-8: RNCC: 3 | RNVC: 2

6 May 1967

4730-00-328-5318
Steam Trap

003285318
TD52-3-8: RNCC: 3 | RNVC: 2
WWT696: RNCC: E | RNVC: 8

9 Dec 1973

4730-00-261-8561
Tube Reducer Body

002618561
SAE-AS4841: RNCC: 3 | RNVC: 1
NAS1564J12-6: RNCC: 3 | RNVC: 2

27 Jun 1973

4730-01-699-8754
Sediment Strainer

016998754
SS-300-0-3: RNCC: 3 | RNVC: 2
030863: RNCC: 5 | RNVC: 2

3 Mar 2022

4730-01-702-3844
Hose Clamp

017023844
RE67208: RNCC: 3 | RNVC: 9

1 Jul 2022

4730-01-650-0848
Tube Union

016500848
SAE-AS18280: RNCC: 3 | RNVC: 1
AS5230T0606: RNCC: 3 | RNVC: 2
AS5230T0606: RNCC: 3 | RNVC: 9

18 Nov 2015

4730-01-703-2988
Tube Fitting Locknut

017032988
5-13-11040-3: RNCC: 3 | RNVC: 2
5-13-11040: RNCC: 7 | RNVC: 2

29 Aug 2022

4730-01-703-3043
Pipe Bushing

017033043
PVC021071400HD: RNCC: 3 | RNVC: 2

29 Aug 2022

4730-01-705-3539
Sediment Strainer Element

017053539
M6759294: RNCC: 3 | RNVC: 2
1.5-125FSS-D-24869-01 REV 0 IT 3: RNCC: D | RNVC: 9

15 Sep 2022

4730-00-277-2742
Pipe Bushing

002772742
WW-P-471BEQBCNK: RNCC: 2 | RNVC: 2
WWP471BEQBCNK: RNCC: 2 | RNVC: 2
WW-P-471: RNCC: 4 | RNVC: 1

1 Jan 1963

4730-00-278-3133
Tube Elbow

002783133
SAE-J512: RNCC: 3 | RNVC: 1
502X3: RNCC: 3 | RNVC: 2
SAE J512 3-3 040201B: RNCC: 3 | RNVC: 2
J512: RNCC: 5 | RNVC: 1
502X3: RNCC: 5 | RNVC: 9
3-3 040201B: RNCC: 5 | RNVC: 9
3-3 040201B: RNCC: 5 | RNVC: 9
J512: RNCC: 5 | RNVC: 9

1 Jan 1963

4730-00-278-4112
Pipe Nipple

002784112
ASTM A733: RNCC: 3 | RNVC: 1
ASTM-A733: RNCC: 3 | RNVC: 1
A733S-310CFG: RNCC: 3 | RNVC: 2
WWN351: RNCC: 5 | RNVC: 9

1 Jan 1963

4730-00-240-1770
Tube Elbow

002401770
SAE-J512: RNCC: 3 | RNVC: 1
SAE J512 8-8 060201B: RNCC: 3 | RNVC: 2
MS39170-7: RNCC: 5 | RNVC: 9
J512: RNCC: 5 | RNVC: 9
40333: RNCC: 5 | RNVC: 9
J512: RNCC: 5 | RNVC: 9

1 Jan 1961

4730-01-690-6618
Moisture Trap

016906618
1C334480-AS: RNCC: 3 | RNVC: 2
1C334480: RNCC: 3 | RNVC: 9
1C334480-AS: RNCC: 5 | RNVC: 2

25 Aug 2020

4730-01-688-3819
Hose Clamp

016883819
SAE-J1508: RNCC: 3 | RNVC: 1
SAEJ1508F60: RNCC: 3 | RNVC: 2
SAE-J1508 TYPE F SIZE 60: RNCC: 3 | RNVC: 2

14 May 2020

4730-00-196-1517
Pipe Nipple

001961517
ASTM-A733: RNCC: 3 | RNVC: 1
A733S-219CFG: RNCC: 3 | RNVC: 2
AS733S-219CB: RNCC: 5 | RNVC: 9
MS51953-219: RNCC: 5 | RNVC: 9
WWN351: RNCC: 5 | RNVC: 9

1 Jan 1961

4730-00-412-2716
Pipe Bushing

004122716
WWP471: RNCC: 4 | RNVC: 1
WW-P-471: RNCC: 4 | RNVC: 1

2 Feb 1972

4730-01-666-1797
Tube Elbow

016661797
SAE-J1453/3: RNCC: 3 | RNVC: 1
SAE J1453-3 8 520701S: RNCC: 3 | RNVC: 2
8 520701S: RNCC: 3 | RNVC: 9
SAE J1453-3: RNCC: 5 | RNVC: 1
J1453-3 8 520701S: RNCC: 5 | RNVC: 2
J1453-3 8 520701S: RNCC: 5 | RNVC: 9
8 520701S: RNCC: 5 | RNVC: 9
SAE J1453-3: RNCC: 5 | RNVC: 9

28 Aug 2017

4730-00-277-2665
Pipe Bushing

002772665
WW-P-471BDQBULF: RNCC: 2 | RNVC: 2
WWP471BDQBULF: RNCC: 2 | RNVC: 2
WW-P-471: RNCC: 4 | RNVC: 1

1 Jan 1963

4730-00-277-2814
Pipe Elbow

002772814
WWP521: RNCC: 4 | RNVC: 1
WWP501: RNCC: E | RNVC: 8

1 Jan 1963

4730-01-666-5868
Tube To Boss Straight Adapter

016665868
SAE-J1453/3: RNCC: 3 | RNVC: 1
SAE J1453-3 16-16 520101SN: RNCC: 3 | RNVC: 2
16-16 520101 SN: RNCC: 3 | RNVC: 9
J1453-3: RNCC: 5 | RNVC: 1
SAE J1453-3 16-16 520101 SN: RNCC: 5 | RNVC: 2
J1453-3 16-16 520101 SN: RNCC: 5 | RNVC: 2
16-16 520101 SN: RNCC: 5 | RNVC: 9
SAE J1453-3 16-16 520101 SN: RNCC: 5 | RNVC: 9
J1453-3: RNCC: 5 | RNVC: 9
J1453-3 16-16 520101 SN: RNCC: 5 | RNVC: 9

13 Sep 2017

4730-01-661-1120
Tube To Boss Straight Adapter

016611120
SAE-AS1985: RNCC: 3 | RNVC: 1
AS1985-02: RNCC: 3 | RNVC: 2
AS1985-02: RNCC: 3 | RNVC: 9
AS1985: RNCC: 5 | RNVC: 1
AS1985: RNCC: 5 | RNVC: 9

16 Feb 2017

4730-01-664-6210
Tube To Boss Tee

016646210
SAE-AS18280: RNCC: 3 | RNVC: 1
AS1001GW060608: RNCC: 3 | RNVC: 2
AS1001GW060608: RNCC: 3 | RNVC: 9

28 Jun 2017

4730-01-660-1095
Pipe Flange

016601095
556-7551239-F139: RNCC: 3 | RNVC: 1
556-7551348-F113: RNCC: 3 | RNVC: 1
556-7551351-F125: RNCC: 3 | RNVC: 1
B793-8720-F126: RNCC: 3 | RNVC: 1
B793-9420-F110: RNCC: 3 | RNVC: 1
B793-9450-F113: RNCC: 3 | RNVC: 1
B793-9480-F125: RNCC: 3 | RNVC: 1
556-7551242-F126: RNCC: 3 | RNVC: 1
556-7551345-F110: RNCC: 3 | RNVC: 1
2633-228-01 ASSY 382: RNCC: 3 | RNVC: 1

5 Jan 2017

4730-00-993-0147
Pipe To Tube Straight Adapter

009930147
MS51819-18PA: RNCC: 2 | RNVC: 2
MIL-DTL-18866: RNCC: 4 | RNVC: 1
J514: RNCC: 5 | RNVC: 1
16 FBU-S: RNCC: 5 | RNVC: 1
MS51819-18P: RNCC: 5 | RNVC: 1
16-16 080102CA-PHOS: RNCC: 5 | RNVC: 1
16FBUS: RNCC: 5 | RNVC: 9
MIL-F-18866: RNCC: 5 | RNVC: 9
16 FBU-S: RNCC: 5 | RNVC: 9
MS51819-18P: RNCC: 5 | RNVC: 9

1 Jan 1962

4730-00-187-4219
Pipe Plug

001874219
WW-P-471: RNCC: 4 | RNVC: 1

1 Jan 1963

4730-00-187-4223
Pipe Plug

001874223
WWP471AASBUM: RNCC: 2 | RNVC: 2
WW-P-471: RNCC: 4 | RNVC: 1

1 Jan 1963

4730-00-269-0109
Pipe Bushing

002690109
WWP471: RNCC: 4 | RNVC: 1
WW-P-471: RNCC: 4 | RNVC: 1

20 Jul 1973

4730-01-666-4534
Tube Fitting Locknut

016664534
SAE-J1453/3: RNCC: 3 | RNVC: 1
SAE J1453-3 16-16 520118C: RNCC: 3 | RNVC: 2
16-16 520118C: RNCC: 3 | RNVC: 9
J1453-3: RNCC: 5 | RNVC: 1
J1453-3 16-16 520118C: RNCC: 5 | RNVC: 2
J1453-3 16-16 520118C: RNCC: 5 | RNVC: 9
16-16 520118C: RNCC: 5 | RNVC: 9
SAE J1453-3 16-16 520118C: RNCC: 5 | RNVC: 9
J1453-3: RNCC: 5 | RNVC: 9

7 Sep 2017

4730-01-666-3680
Pipe To Hose Elbow

016663680
SAE-J1231: RNCC: 3 | RNVC: 1
SAE J1231 4-4 431460SA: RNCC: 3 | RNVC: 2
4-4-431460-SA: RNCC: 3 | RNVC: 9
J1231: RNCC: 5 | RNVC: 1
J1231-4-4-431460-SA: RNCC: 5 | RNVC: 2
J1231-4-4-431460-SA: RNCC: 5 | RNVC: 9
J1231: RNCC: 5 | RNVC: 9
4-4-431460-SA: RNCC: 5 | RNVC: 9

5 Sep 2017

4730-00-063-3913
Hose Mender

000633913
AA2921M2B: RNCC: 2 | RNVC: 2
A-A-2921: RNCC: 4 | RNVC: 1
234C3-4HOSE: RNCC: 5 | RNVC: 9
WW-C-1692: RNCC: 5 | RNVC: 9
234-Z-3/4: RNCC: 5 | RNVC: 9

1 Jan 1963

4730-01-658-0635
Pipe Reducer

016580635
1/4 FG-S: RNCC: 3 | RNVC: 2
J28010-123: RNCC: 5 | RNVC: 2

12 Sep 2016

4730-01-659-2108
Swivel Flange To Hose Connector

016592108
SAE J1453-3: RNCC: 3 | RNVC: 1
SAE-J1453/3: RNCC: 3 | RNVC: 1
SAE J1453-3 8-8 520181CN: RNCC: 3 | RNVC: 2
SAE J1453-3: RNCC: 5 | RNVC: 9
SAE J1453-3 8-8 520181CN: RNCC: 5 | RNVC: 9

9 Nov 2016

4730-00-064-4434
Quick Disconnect Plug

000644434
AA59326/11-10-A: RNCC: 2 | RNVC: 2
A-A-59326/11: RNCC: 4 | RNVC: 1
A-A-59326: RNCC: 5 | RNVC: 1
634A-6AL: RNCC: 5 | RNVC: 9
634-A-0190: RNCC: 5 | RNVC: 9
634-6AL: RNCC: 5 | RNVC: 9
MIL-C-27487: RNCC: 5 | RNVC: 9
634-A-6IN-AL: RNCC: 5 | RNVC: 9
600-DP-AL: RNCC: 5 | RNVC: 9
AA59326/11-10: RNCC: 5 | RNVC: 9

1 Jan 1961

4730-01-329-4988
Hose To Boss Straight Adapter

013294988
M24787/3,TY-C,GR-II,-12 1/2: RNCC: 2 | RNVC: 2
MIL-DTL-24787/3: RNCC: 4 | RNVC: 1
MIL-F-24787: RNCC: 5 | RNVC: 1
MIL-F-24787/3: RNCC: 5 | RNVC: 9
MIL-F-24787/3 GPII TYC 1/2-12: RNCC: 5 | RNVC: 9

18 Nov 1990

4730-00-054-6327
Pipe Bushing

000546327
WW-P-471: RNCC: 4 | RNVC: 1

1 Jan 1961

NSN 4730-01-364-6029 013646029 ADAPTER,STRAIGHT,PIPE TO TUBE

4730-01-364-6029
Pipe To Tube Straight Adapter

013646029
SS-100-7-2: RNCC: 3 | RNVC: 2
10474044: RNCC: 6 | RNVC: 9

22 Sep 1992

4730-01-701-7065
Pipe Reducer

017017065
SAE-AS18280: RNCC: 3 | RNVC: 1
AS5230W1006: RNCC: 3 | RNVC: 2

2 Jun 2022

4730-01-702-3851
Hose Clamp

017023851
RE65979: RNCC: 3 | RNVC: 9

1 Jul 2022

4730-00-640-5980
Pipe Plug

006405980
WWP471: RNCC: 4 | RNVC: 1
WW-P-471: RNCC: 4 | RNVC: 1

1 Jan 1963

4730-00-640-6907
Pipe Plug

006406907
WWP471: RNCC: 4 | RNVC: 1
WW-P-471: RNCC: 4 | RNVC: 1

1 Jan 1963

4730-00-163-4640
Tube Tee

001634640
AFP651F161616: RNCC: 3 | RNVC: 2
VSF1270F161616: RNCC: 3 | RNVC: 2
GA7407F161616: RNCC: 3 | RNVC: 2
AP879F161616: RNCC: 3 | RNVC: 2
2-02269F161616: RNCC: 3 | RNVC: 2
ER211F161616: RNCC: 5 | RNVC: 9
US1119F161616: RNCC: 5 | RNVC: 9
4671133F161616: RNCC: 5 | RNVC: 9
DLG211F161616: RNCC: 5 | RNVC: 9
STSPB211F161616: RNCC: 5 | RNVC: 9

12 Nov 1971

4730-00-802-7052
Tube Nipple

008027052
MS51812-12PB: RNCC: 2 | RNVC: 2
MIL-DTL-18866: RNCC: 4 | RNVC: 1
J514: RNCC: 5 | RNVC: 1
J514 24-24 080601PA: RNCC: 5 | RNVC: 1
MILF18866: RNCC: 5 | RNVC: 9
24-24 080601C-PHOS: RNCC: 5 | RNVC: 9
MS51812-32P: RNCC: 5 | RNVC: 9
MS51812-32P: RNCC: 5 | RNVC: 9
MS51812-32P: RNCC: 5 | RNVC: 9
MS51812-32D: RNCC: 5 | RNVC: 9

1 Jan 1960

4730-00-790-2495
Hose Elbow

007902495
M24787/5-8,TY-D,GR-VIII: RNCC: 2 | RNVC: 2
MIL-DTL-24787/5: RNCC: 4 | RNVC: 1
4-191302-8: RNCC: 5 | RNVC: 1
2620-225X1PC422: RNCC: 5 | RNVC: 1
M24136/3E8: RNCC: 5 | RNVC: 9
MIL-F-24787: RNCC: 5 | RNVC: 9
MIL-F-24787/5 GRVIII TYD: RNCC: 5 | RNVC: 9
MIL-H-24136/3: RNCC: 5 | RNVC: 9
MIL-F-24787/5: RNCC: 5 | RNVC: 9

1 Jan 1960

4730-00-810-7039
Pipe To Tube Tee

008107039
MS51818-1A: RNCC: 2 | RNVC: 2
MIL-DTL-18866: RNCC: 4 | RNVC: 1
2SBU-S: RNCC: 5 | RNVC: 1
8605X2: RNCC: 5 | RNVC: 1
MS51818-1: RNCC: 5 | RNVC: 9
2SBU-S: RNCC: 5 | RNVC: 9
MIL-F-18866: RNCC: 5 | RNVC: 9
423618: RNCC: 5 | RNVC: 9
423618: RNCC: 5 | RNVC: 9
423618: RNCC: 5 | RNVC: 9

1 Jan 1962

4730-00-950-8830
Boss Nipple

009508830
SAE-AS18280: RNCC: 3 | RNVC: 1
MS21900J12: RNCC: 3 | RNVC: 2
AS18280: RNCC: 5 | RNVC: 9
AS21900: RNCC: 5 | RNVC: 9
MS21900J12: RNCC: 5 | RNVC: 9
MS21900-12C: RNCC: 5 | RNVC: 9
MS21900J12: RNCC: 5 | RNVC: 9
AS18280: RNCC: 5 | RNVC: 9
AS21900: RNCC: 5 | RNVC: 9
MS21900-12C: RNCC: 5 | RNVC: 9

1 Jan 1962

4730-01-703-0812
Pipe Tee

017030812
8668324-011: RNCC: 3 | RNVC: 2
8668324/REVISION B/FIND 11: RNCC: C | RNVC: 1
8668324: RNCC: D | RNVC: 9

16 Aug 2022

4730-01-703-3744
Hose Elbow

017033744
1650391F: RNCC: 3 | RNVC: 2

1 Sep 2022

4730-01-703-2415
Sediment Strainer Element

017032415
801-6640828-SHEET-186: RNCC: 3 | RNVC: 2
2633-713-01-PC-186: RNCC: 5 | RNVC: 2
801-6640828: RNCC: D | RNVC: 9

25 Aug 2022

4730-01-704-4559
Tube Union

017044559
10-8 HTX-SS: RNCC: 3 | RNVC: 2

12 Sep 2022

4730-01-705-3096
Swivel Flange To Hose Straight Adapter

017053096
SS-1210-11-12: RNCC: 3 | RNVC: 2

13 Sep 2022

4730-01-669-0669
Tube Union

016690669
SAE-AS18280: RNCC: 3 | RNVC: 1
AS5230W1616: RNCC: 3 | RNVC: 2
AS5230W1616: RNCC: 3 | RNVC: 9

19 Dec 2017

4730-01-670-4111
Tube Coupling Nut

016704111
SAE AS5175: RNCC: 3 | RNVC: 1
AS5175J08: RNCC: 3 | RNVC: 2
SAE AS4841: RNCC: 5 | RNVC: 1

22 Feb 2018

4730-01-698-3083
Lubrication Fitting

016983083
842-349437-21: RNCC: 3 | RNVC: 2

9 Nov 2021

4730-01-702-0069
Tube Elbow

017020069
24 V5OX-S: RNCC: 3 | RNVC: 2

21 Jun 2022

4730-01-702-5323
Hose Coupling

017025323
546-6404323-FIND-7: RNCC: 3 | RNVC: 2
902-6725854-FIND-F39: RNCC: 5 | RNVC: 2
D2000020539-FIND-F39: RNCC: 5 | RNVC: 2
DF2018-76-FIND-7: RNCC: 5 | RNVC: 2

13 Jul 2022

4730-01-702-0526
Fluid Flow Restrictor

017020526
12596700-4: RNCC: 3 | RNVC: 2

21 Jun 2022

4730-01-702-1213
Pipe Cross

017021213
12639316: RNCC: 3 | RNVC: 2

22 Jun 2022

4730-01-702-6478
Machine Thread Plug

017026478
1201062000: RNCC: 3 | RNVC: 2
5803014508: RNCC: 5 | RNVC: 2

19 Jul 2022

4730-01-702-1092
Drive Adapter

017021092
988-0001: RNCC: 3 | RNVC: 2

22 Jun 2022

4730-01-701-7858
Tube Tee

017017858
AS4411W081212: RNCC: 3 | RNVC: 2
AS4411: RNCC: 5 | RNVC: 1

8 Jun 2022

4730-01-701-9158
Fluid Strainer Cover

017019158
8827652: RNCC: 3 | RNVC: 2
8827652 REV-: RNCC: D | RNVC: 9

15 Jun 2022

4730-01-701-7465
Pipe Coupling

017017465
1342-025: RNCC: 3 | RNVC: 2

6 Jun 2022

4730-01-701-8884
Quick Disconnect Cap

017018884
8827672: RNCC: 3 | RNVC: 2
8827672 REV: RNCC: D | RNVC: 9

14 Jun 2022

4730-01-701-9588
Swivel Flange To Tube Elbow

017019588
AS4137V0808P: RNCC: 3 | RNVC: 2

17 Jun 2022

4730-01-701-7849
Tube Tee

017017849
AS4410J121212: RNCC: 3 | RNVC: 2
AS4410: RNCC: 5 | RNVC: 1

8 Jun 2022

4730-01-701-7928
Pipe To Tube Elbow

017017928
C8UPMTB12-M22-K: RNCC: 3 | RNVC: 2
MDQ69DOTS12M22: RNCC: 5 | RNVC: 9
12683390: RNCC: 7 | RNVC: 2

8 Jun 2022

4730-01-666-1863
Tube Tee

016661863
SAE-J1453/3: RNCC: 3 | RNVC: 1
SAE J1453-3 6-6-6 520959S: RNCC: 3 | RNVC: 2
6-6-6 520959S: RNCC: 3 | RNVC: 9
SAE J1453: RNCC: 5 | RNVC: 1
SAE J1453: RNCC: 5 | RNVC: 9
SAE J1453-3 6-6-6 520959S: RNCC: 5 | RNVC: 9
6-6-6 520959S: RNCC: 5 | RNVC: 9

29 Aug 2017

4730-01-701-0564
Pipe Plug

017010564
06354-08006-101: RNCC: 3 | RNVC: 2
06354-08006: RNCC: D | RNVC: 9

25 Apr 2022

4730-01-700-5224
Tube To Boss Straight Adapter

017005224
8-WF5OX-WLN-S: RNCC: 3 | RNVC: 2

31 Mar 2022

4730-01-701-5017
Moisture Trap

017015017
PMCP2XLP04150X02500: RNCC: 3 | RNVC: 2
221637-02: RNCC: D | RNVC: 9

19 May 2022

4730-01-701-5377
Fluid Orifice Plate

017015377
23509-400-1: RNCC: 3 | RNVC: 2

23 May 2022

4730-01-702-2985
Tube Elbow

017022985
BACE21AW1010W: RNCC: 3 | RNVC: 2

27 Jun 2022

4730-01-702-3078
Boss Reducer

017023078
TRC-8064-P: RNCC: 3 | RNVC: 2

28 Jun 2022

4730-01-702-3083
Pipe Tee

017023083
801-334C: RNCC: 3 | RNVC: 2

28 Jun 2022

4730-01-701-1952
Air Line Manifold

017011952
11869SP: RNCC: 3 | RNVC: 2

3 May 2022

4730-01-701-2317
Tube Elbow

017012317
AS4130T1616: RNCC: 3 | RNVC: 2

4 May 2022

4730-01-701-2574
Boss Tee

017012574
AS4133T161610: RNCC: 3 | RNVC: 2

5 May 2022

4730-01-701-3502
Hydraulic Manifold Assembly

017013502
4952940: RNCC: 3 | RNVC: 2
4952940: RNCC: 3 | RNVC: 2

11 May 2022

4730-01-701-4941
Pipe Flange

017014941
5801712485: RNCC: 3 | RNVC: 2

19 May 2022

4730-01-701-6837
Pipe Flange

017016837
2-PSA-PSW-0001-KIT L: RNCC: 3 | RNVC: 2
243-8728884 SHEET 3: RNCC: D | RNVC: 9

1 Jun 2022

4730-01-701-6992
Tube Tee

017016992
AS4139V060604P: RNCC: 3 | RNVC: 2

2 Jun 2022

4730-01-701-7136
Hose To Gas Fitting Straight Adapter

017017136
A08276: RNCC: 3 | RNVC: 2

3 Jun 2022

4730-01-664-9483
Pipe Union

016649483
SAE-AS18280: RNCC: 3 | RNVC: 1
AS1007HJ0405: RNCC: 3 | RNVC: 2
AS1007HJ0405: RNCC: 3 | RNVC: 9

12 Jul 2017

4730-01-698-2587
Tube Coupling

016982587
58-60297-00: RNCC: 3 | RNVC: 2

5 Nov 2021

4730-01-698-9542
Hydraulic System Accessories Manifold

016989542
7020500-01: RNCC: 3 | RNVC: 2

23 Dec 2021

4730-01-699-7163
Pipe Elbow

016997163
H016245: RNCC: 3 | RNVC: 2
5-13-10947-1: RNCC: 5 | RNVC: 2
5-13-10947: RNCC: 7 | RNVC: 2

22 Feb 2022

4730-01-699-7562
Pipe Plug

016997562
966147: RNCC: 3 | RNVC: 2

24 Feb 2022

4730-01-699-8281
Pipe Reducer

016998281
RED30S/35LCF: RNCC: 3 | RNVC: 2

1 Mar 2022

4730-01-698-9460
Tube Elbow

016989460
451-0386: RNCC: 3 | RNVC: 2

22 Dec 2021

4730-01-698-1369
Hose Clamp

016981369
46060: RNCC: 3 | RNVC: 2

1 Nov 2021

4730-01-698-0424
Tube To Boss Tee

016980424
MS51892-7KAB: RNCC: 2 | RNVC: 2
MIL-DTL-18866: RNCC: 4 | RNVC: 1
MS51892-7PBB: RNCC: 5 | RNVC: 9

26 Oct 2021

4730-01-697-7009
Return Pipe Bend

016977009
820-2177965,2IN,180DEG,SCH80LR: RNCC: 3 | RNVC: 1

5 Oct 2021

4730-01-699-6373
Pipe Reducer

016996373
11423710: RNCC: 3 | RNVC: 2

15 Feb 2022

4730-01-699-6504
Boss Elbow

016996504
3990574: RNCC: 3 | RNVC: 2

16 Feb 2022

4730-01-699-7184
Pipe To Hose Straight Adapter

016997184
H016247: RNCC: 3 | RNVC: 2
5-13-10949-1: RNCC: 5 | RNVC: 2
5-13-10949: RNCC: 7 | RNVC: 2

22 Feb 2022

4730-01-699-1489
Pipe Flange

016991489
300180: RNCC: 3 | RNVC: 2

12 Jan 2022

4730-01-697-6650
Pipe Tee

016976650
W04049: RNCC: 3 | RNVC: 2

4 Oct 2021

4730-01-699-7782
Pipe Elbow

016997782
820-2177966-7S-82: RNCC: 3 | RNVC: 1
820-2177966,2IN,45DEG,CRES,SW: RNCC: 5 | RNVC: 1

24 Feb 2022

4730-01-699-7796
Pipe Reducer

016997796
820-2177965,2-1/2X2IN: RNCC: 3 | RNVC: 1

24 Feb 2022

4730-01-698-0880
Sediment Strainer

016980880
030SWB-60602213: RNCC: 3 | RNVC: 2

28 Oct 2021

4730-01-699-0113
Tube To Boss Straight Adapter

016990113
LC1510-24C: RNCC: 3 | RNVC: 2

30 Dec 2021

4730-01-699-1417
Sediment Strainer Element

016991417
0069GB-60802212: RNCC: 3 | RNVC: 2

11 Jan 2022

4730-01-698-8516
Tube-Pipe Fitting Kit

016988516
9826-G502: RNCC: 3 | RNVC: 2
9826-G502/REV -: RNCC: D | RNVC: 9

15 Dec 2021

4730-01-698-9333
Valve Adapter Assembly

016989333
7021800-01: RNCC: 3 | RNVC: 2

22 Dec 2021

4730-01-179-2905
Tube To Boss Tee

011792905
SAE-AS1003: RNCC: 3 | RNVC: 1
AS1003D121004: RNCC: 3 | RNVC: 2
SAE-AS18280: RNCC: 5 | RNVC: 1
AS18280: RNCC: 5 | RNVC: 9
AS1003D121004: RNCC: 5 | RNVC: 9
AS18280: RNCC: 5 | RNVC: 9
AS1003D121004: RNCC: C | RNVC: 1

16 May 1984

4730-01-071-4039
Pipe To Tube Tee

010714039
MS51822-3: RNCC: 2 | RNVC: 2
MIL-DTL-18866: RNCC: 4 | RNVC: 1
800-4: RNCC: 5 | RNVC: 1
3400-4: RNCC: 5 | RNVC: 1
4-2 080426CA: RNCC: 5 | RNVC: 1
J514: RNCC: 5 | RNVC: 1
4MBUS: RNCC: 5 | RNVC: 1
S400-3-TFT: RNCC: 5 | RNVC: 1
7805X4: RNCC: 5 | RNVC: 1
4MBUS: RNCC: 5 | RNVC: 9

7 Feb 1979

4730-01-697-6973
Pipe To Tube Straight Adapter

016976973
W01246: RNCC: 3 | RNVC: 2

5 Oct 2021

4730-01-696-0820
Tube Nipple

016960820
SAE-J1453/3: RNCC: 3 | RNVC: 1
SAE J1453-3 24-24 520101S: RNCC: 3 | RNVC: 2
SAE J1453-3: RNCC: 5 | RNVC: 1
24-24 520101S: RNCC: 5 | RNVC: 2
J1453 24-24 520101S: RNCC: 5 | RNVC: 2
SAE J1453 24-24 520101S: RNCC: 5 | RNVC: 9
24-24 520101S: RNCC: 5 | RNVC: 9

8 Jul 2021

4730-01-700-9367
Pipe To Tube Straight Adapter

017009367
5007L-12-04: RNCC: 3 | RNVC: 2
17-61250: RNCC: 7 | RNVC: 2

20 Apr 2022

4730-01-697-7383
Tube Elbow

016977383
NGE510GP1212: RNCC: 3 | RNVC: 2
R51003T12: RNCC: 5 | RNVC: 2
DASC027T1212: RNCC: 5 | RNVC: 2
NGE510GP: RNCC: D | RNVC: 9

7 Oct 2021

4730-01-697-7401
Tube Elbow

016977401
NGE510GP1010: RNCC: 3 | RNVC: 2
R51003T10: RNCC: 5 | RNVC: 2
DASC027T1010: RNCC: 5 | RNVC: 2
NGE510GP: RNCC: D | RNVC: 9

7 Oct 2021

4730-01-701-0072
Pipe Reducer

017010072
R82141T04: RNCC: 3 | RNVC: 2
R82141T04: RNCC: 5 | RNVC: 2

22 Apr 2022

4730-01-700-1821
Pipe Nipple

017001821
TN075X2: RNCC: 3 | RNVC: 2
17-60809-02: RNCC: D | RNVC: 9

21 Mar 2022

4730-01-697-9030
Hose Clamp

016979030
6114-700: RNCC: 3 | RNVC: 2
7300-G502 REV E ITEM 28: RNCC: C | RNVC: 1
7300-G502: RNCC: D | RNVC: 9

18 Oct 2021

4730-01-698-8064
Packing Nut

016988064
202023746-01: RNCC: 3 | RNVC: 2
202023746: RNCC: D | RNVC: 9

9 Dec 2021

4730-01-699-1910
Quick Disconnect Coupling Assembly

016991910
301355: RNCC: 3 | RNVC: 2

14 Jan 2022

4730-00-587-4908
Hose Elbow

005874908
M24787/5-64,TY-D,GR-IV: RNCC: 2 | RNVC: 2
MIL-DTL-24787/5: RNCC: 4 | RNVC: 1
140-190717-64: RNCC: 5 | RNVC: 9
MIL-F-24787/5: RNCC: 5 | RNVC: 9
90ELB-449E-64: RNCC: 5 | RNVC: 9
MIL-F-24787/5,GR-IV,TY-D,-64: RNCC: 5 | RNVC: 9
265-190717-64: RNCC: 5 | RNVC: 9

24 Jan 1968

4730-00-540-4485
Pipe Flange

005404485
568: RNCC: 3 | RNVC: 1
568 2IN: RNCC: 3 | RNVC: 2
30: RNCC: E | RNVC: 8

1 Jan 1963

4730-01-699-1366
Anchor And Reinforcement Pipe Clamp

016991366
S346DG26: RNCC: 3 | RNVC: 2

11 Jan 2022

4730-01-701-4772
Pipeline Separator

017014772
21169409: RNCC: 3 | RNVC: 2

18 May 2022

4730-01-698-4553
Hose Reducer

016984553
GZR18/10LCF FKM: RNCC: 3 | RNVC: 2

18 Nov 2021

4730-00-968-3428
Pipe To Tube Elbow

009683428
769FB08-04: RNCC: 3 | RNVC: 2
769FB: RNCC: E | RNVC: 8

1 Jan 1962

4730-01-698-9944
Flange To Flange Straight Adapter

016989944
17-60169: RNCC: 3 | RNVC: 2

29 Dec 2021

4730-00-961-3495
Pipe Reducer

009613495
93: RNCC: 3 | RNVC: 1
B16-9: RNCC: E | RNVC: 8

1 Jan 1962

4730-01-702-1635
Hydraulic System Accessories Manifold

017021635
12594540: RNCC: 3 | RNVC: 2

22 Jun 2022

4730-01-703-3462
Pipe Elbow

017033462
106-W3044: RNCC: 3 | RNVC: 2
5-13-11278-1: RNCC: 7 | RNVC: 2
5-13-11278: RNCC: D | RNVC: 9

31 Aug 2022

4730-01-705-0422
Pipe Plug

017050422
94050904BP: RNCC: 3 | RNVC: 2
9405090BP: RNCC: 3 | RNVC: 9

12 Sep 2022

4730-00-963-5846
Swivel Flange To Hose Straight Adapter

009635846
M24787/1FXX-IIO24135/04-48X-03XX: RNCC: 2 | RNVC: 2
M24787/1FXX-IIO-24135/04-48X03XX: RNCC: 2 | RNVC: 2
MIL-DTL-24787/1: RNCC: 4 | RNVC: 1
MIL-F-24787: RNCC: 5 | RNVC: 9
M24787/1,3IN-48,TY-F,CL-II,GR-IV: RNCC: 5 | RNVC: 9
M24787/1,TY-F,CL-II,GR-IV,-48 3: RNCC: 5 | RNVC: 9
117-190751-3-48: RNCC: 5 | RNVC: 9
265-190751-3-48: RNCC: 5 | RNVC: 9
EF-449A5-3-48: RNCC: 5 | RNVC: 9
MIL-F-24787/1: RNCC: 5 | RNVC: 9

1 Jan 1962

4730-00-542-5210
Tube Elbow

005425210
M1183/11-37A4: RNCC: 2 | RNVC: 2
MIL-DTL-1183/11: RNCC: 4 | RNVC: 1
MIL-F-1183/11: RNCC: 5 | RNVC: 9
CS4730-0120A71GLPQ: RNCC: 5 | RNVC: 9
M1183/11-37A34: RNCC: 5 | RNVC: 9

1 Jan 1961

4730-01-647-1655
Tube Tee

016471655
SAE J1453-3: RNCC: 3 | RNVC: 1
SAE-J1453/3: RNCC: 3 | RNVC: 1
SAE J1453-3 4-4-4 520432CN: RNCC: 3 | RNVC: 2
4-4-4 520432CN: RNCC: 5 | RNVC: 9
4-4-4 520432CN: RNCC: 5 | RNVC: 9
SAE J1453-3: RNCC: 5 | RNVC: 9

13 Aug 2015

4730-00-825-9688
Pipe Nipple

008259688
ASTM B 687: RNCC: 3 | RNVC: 1
ASTM-B687: RNCC: 3 | RNVC: 1
WW-N-351: RNCC: 5 | RNVC: 9

1 Jan 1962

4730-00-844-3823
Pipe Nipple

008443823
ASTM B 687: RNCC: 3 | RNVC: 1
ASTM-B687: RNCC: 3 | RNVC: 1
WW-N-351: RNCC: 5 | RNVC: 9

1 Jan 1962

4730-00-845-0673
Pipe Nipple

008450673
ASTM B 687: RNCC: 3 | RNVC: 1
ASTM-B687: RNCC: 3 | RNVC: 1
WW-N-351TY2TABLE5: RNCC: 5 | RNVC: 9

1 Jan 1963

Load More Results