What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Pipe Bend?

A Return Pipe Bend (BEND,PIPE,RETURN) is a fitting designed to join a pipe in a parallel position to another pipe for reversing the flow of gas, steam, air, or liquids. Excludes BEND, SOIL PIPE.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Soil Pipe Reducer?

A Soil Pipe Reducer (REDUCER,SOIL PIPE) is a straight fitting with the spigot end larger than the hub end. It is used to connect two pieces of soil pipe of different size.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Pipe Lateral?

A Pipe Lateral (LATERAL,PIPE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit pipes and/or pipe fittings to be taken off laterally from the main line. It may have side inlet(s).

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Soil Pipe Lateral?

A Soil Pipe Lateral (LATERAL,SOIL PIPE) is a fitting having one or two branches which are fixed at various angles other than 90 degrees to the run. If item has two branches, they will be located on opposite sides of the run (180 degrees apart) and will be identical. It may have side inlets.

What is a Soil Pipe Tee?

A Soil Pipe Tee (TEE,SOIL PIPE) is a fitting consisting of a run and a branch. The branch may be either curved or straight, but the axis of the end connection intersects the axis of the run at right angles. It may have side inlets.

What is a Tube Coupling Inverted Nut?

A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.

What is a Tube Coupling Nut?

A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.

What is an Union Tailpiece?

An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.

What is an Union Thread Piece?

An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - United Kingdom (UK)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by United Kingdom (UK) - NCB is 99

Page 80 of 242

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by United Kingdom

47	30	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - United Kingdom (UK)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 43 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 608 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 26 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 14 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 16 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
What is a Bulkhead Hose Connector? 44 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 123 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 192 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 30 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Cap? 97 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 18 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 1095 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 322 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 1326 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 970 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 64 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Pipe To Hose Straight Adapter? 986 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 8242 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 197 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Pipe Bushing? 294 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Hose Nipple? 57 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 1594 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 953 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 86 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 586 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Tube Union? 47 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 172 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Pipe Bend? 11 Items: A Return Pipe Bend (BEND,PIPE,RETURN) is a fitting designed to join a pipe in a parallel position to another pipe for reversing the flow of gas, steam, air, or liquids. Excludes BEND, SOIL PIPE.
What is a Return Tube Bend? 18 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 33 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 131 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Soil Pipe Reducer? 28 Items: A Soil Pipe Reducer (REDUCER,SOIL PIPE) is a straight fitting with the spigot end larger than the hub end. It is used to connect two pieces of soil pipe of different size.
What is a Pipe Flange? 1150 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Machine Thread Plug? 108 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Pipe Lateral? 30 Items: A Pipe Lateral (LATERAL,PIPE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit pipes and/or pipe fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Tube Lateral? 16 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 122 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 2442 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 18 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 312 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Tube Tee? 892 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Soil Pipe Lateral? 30 Items: A Soil Pipe Lateral (LATERAL,SOIL PIPE) is a fitting having one or two branches which are fixed at various angles other than 90 degrees to the run. If item has two branches, they will be located on opposite sides of the run (180 degrees apart) and will be identical. It may have side inlets.
What is a Soil Pipe Tee? 10 Items: A Soil Pipe Tee (TEE,SOIL PIPE) is a fitting consisting of a run and a branch. The branch may be either curved or straight, but the axis of the end connection intersects the axis of the run at right angles. It may have side inlets.
What is a Tube Coupling Inverted Nut? 365 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Tube Coupling Nut? 113 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is an Union Tailpiece? 217 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 61 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Pipe Swivel Joint? 56 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 525 Items
What is a Sediment Strainer? 692 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 24 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 54 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 16 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 228 Items
What is a Pipe Repair Clamp? 51 Items: A Pipe Repair Clamp (CLAMP,REPAIR,PIPE) is a one-piece or two-piece metal clamp generally used with gasket(s) and designed to repair longitudinal splits and pit holes and/or to support thin walls in a straight run of pipe. See also CLAMP, LEAK REPAIR, PIPE COUPLING.
What is a Pipe Cap? 247 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 238 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 14 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 1072 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 1811 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 551 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
What is a Hose Reducer? 41 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 2097 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 1319 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Pipe Cross? 115 Items: A Pipe Cross (CROSS,PIPE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is designed to be used as a junction at the intersection of pipe and/or pipe fittings.
What is a Pipe To Tube Cross? 58 Items: A Pipe To Tube Cross (CROSS,PIPE TO TUBE) is a fitting having four branches in the same plane whose axes form right angles. One or more of the connections have standard pipe threads or are unthreaded and designed to accommodate a pipe. The remaining connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It may have side inlet(s).
What is a Tube Cross? 86 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Spool Piece? 28 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Water Closet Bend? 10 Items: A Water Closet Bend (BEND,WATER CLOSET) is a waste line fitting designed for use with a water closet, to provide a means of connecting a water closet bowl to a waste line.
What is a Pipe Locknut? 74 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 21 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Drainage Pipe Lateral? 23 Items: A Drainage Pipe Lateral (LATERAL,DRAINAGE PIPE) is a fitting having one or two branches which are fixed at various angles other than 90 degrees (1.5705 radians) to the run. It is used as a junction at the intersection of a drainage line and is provided with a shoulder(s) at the end(s) of its internal threaded or unthreaded portion, conforming to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It may have side inlet(s).
What is a Hose Clamp? 1782 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is a Fuel Feeder Manifold? 10 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Soil Pipe Plug? 10 Items: A Soil Pipe Plug (PLUG,SOIL PIPE) is a fitting designed to fit into the hub end of soil pipe or a soil pipe fitting for sealing.
What is a Pipe Clamp Coupling? 59 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is an Air Line Manifold? 48 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 17 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 153 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 186 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 570 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 70 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 522 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 24 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 565 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Elbow Assembly? 11 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Fluid Flow Restrictor? 857 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 36 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Self-Sealing Coupling Half? 218 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 11 Items
What is a Drainage Pipe Elbow? 29 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Pipe True Wye? 40 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 20 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 24 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Sediment Strainer Element? 1052 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 1394 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 1435 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1839 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 139 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is an Union Nut? 1395 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Quick Disconnect Coupling Assembly? 63 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 63 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 20 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Magnetic Pipe Plug? 43 Items: A Magnetic Pipe Plug (PLUG,PIPE,MAGNETIC) is a pipe fitting primarily designed for installation in a lubrication or hydraulic system. It has an integral magnet in the body and external pipe threads.
What is a Hose To Boss Straight Adapter? 51 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 242 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 473 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 37 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 13 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Pipe To Boss Elbow? 20 Items: A Pipe To Boss Elbow (ELBOW,PIPE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a pipe or pipe fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like. See also ELBOW, PIPE; and ELBOW, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Boss Elbow? 66 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 44 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Pipe To Boss Tee? 10 Items: A Pipe To Boss Tee (TEE,PIPE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a pipe or pipe fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Tube To Boss Tee? 35 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 59 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Boss Nipple? 29 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Pipe Outlet? 23 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 23 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 26 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Hose Straight Adapter? 110 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 86 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 57 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Flange Elbow? 169 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 11 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 18 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Pipe Elbow? 65 Items: A Flange To Pipe Elbow (ELBOW,FLANGE TO PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 118 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Flange Tee? 38 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Soil Pipe Coupling? 21 Items: A Soil Pipe Coupling (COUPLING,SOIL PIPE) is a straight fitting used to connect two pieces of soil pipe of the same size.
What is a Quick Disconnect Plug? 17 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Suction Strainer? 51 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Coupling Swage Ferrule? 19 Items: A Tube Coupling Swage Ferrule (FERRULE,SWAGE,TUBE COUPLING) is a flanged cylindrical metallic item used with a plain end tube and swaged in place. It is designed to be used as a component part of a flexible or rigid tube coupling.
What is a Tube Fitting Insert? 10 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Fluid-Emulsion Spray Nozzle? 46 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 10 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 12 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 11 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Quick-Disconnect Nipple? 12 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is an Exhaust-Intake Pneumatic Muffler? 23 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Flange To Flange Straight Adapter? 29 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
Connector,Tubing,Straight 28 Items
What is a Hydraulic Manifold Assembly? 264 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Tube Swivel Joint? 20 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
Adapter,Check Valve 11 Items
Nipple,Special 34 Items
Adapter Assembly,Valve 18 Items
Adapter And Flange Assembly 17 Items
What is a Tube Coupling Assembly? 18 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 65 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Special-Shaped Hose Clamp? 15 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Pipe To Tube Swivel Joint? 21 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Tube Fitting Compression Ferrule? 60 Items: A Tube Fitting Compression Ferrule (FERRULE,COMPRESSION,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be slipped over tubing. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled, the joint seals at the seat in a manner similar to a seat type union.
What is a Pipe Fitting Flared Collar? 39 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 590 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 63 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 53 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Hydraulic Swivel Joint? 54 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 209 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.

Stock Items From Supply Class 4730 Page 80 of 242

4730-99-131-2434
Reduced Branch Tee

991312434
86037523: RNCC: 3 | RNVC: 2
TT7777832: RNCC: 6 | RNVC: 9

16 Jan 2002

4730-99-532-5631
Pipe Expansion Joint

995325631
16YJX46095C: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-370-8171
Pipe Coupling

993708171
BM43940: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-726-2937
Joiner

997262937
KA5128: RNCC: 3 | RNVC: 2

7 Dec 2010

4730-99-733-5376
Pipe Plug

997335376
670400: RNCC: 3 | RNVC: 2
B75434: RNCC: 6 | RNVC: 9
B76598: RNCC: 6 | RNVC: 9

29 Jun 1987

4730-99-726-4884
Pipe Reducer

997264884
40019736: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-726-8698
Pipe Locknut

997268698
LN2P06: RNCC: 3 | RNVC: 2
FV2026107: RNCC: 5 | RNVC: 2

12 Dec 1985

4730-99-733-9557
Soil Pipe Coupling

997339557
WP25G: RNCC: 3 | RNVC: 2
79430649: RNCC: 5 | RNVC: 2
2500601330: RNCC: 5 | RNVC: 2

24 Nov 2011

4730-99-733-6143
Hose Clamp

997336143
84740802: RNCC: 3 | RNVC: 2
A0084740802: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-710-1799
Pipe To Tube Straight Adapter

997101799
NM88568: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-244-6186
Flange Elbow

992446186
NJT018: RNCC: 3 | RNVC: 2
SW435P: RNCC: 6 | RNVC: 9

9 Sep 1993

4730-99-611-0018
Pi Straight Adapter

996110018
137101D31: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-710-2989
Sediment Strainer Element

997102989
B43771: RNCC: 3 | RNVC: 2
NM77823: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-760-7561
Pipe Tee

997607561
BS3799-TABLE 13 1-1/2X1-1/2X3/8: RNCC: 4 | RNVC: 1
TEE: RNCC: 5 | RNVC: 1
HC56: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-495-4266
H Spherical Bearing

994954266
PC-1-56945: RNCC: 3 | RNVC: 1
QCA/PC-1-56945: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-252-4130
Sediment Strainer Element

992524130
099010124: RNCC: 3 | RNVC: 2
Q27-9-4: RNCC: 5 | RNVC: 1
Q27-9-4: RNCC: 5 | RNVC: 1
441010205 ITEM 3: RNCC: 5 | RNVC: 2
441010205/3: RNCC: 5 | RNVC: 2
441370200-3: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-772-1108
Extrusion

997721108
SSN09/Y/324/109: RNCC: 3 | RNVC: 2
Y/324/109: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-238-2084
Quick Disconnect Plug

992382084
894-01106: RNCC: 3 | RNVC: 2

11 Aug 2009

4730-99-757-6638
Pipe Tee

997576638
24MHD16: RNCC: 3 | RNVC: 1
44312-204-00-9: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-438-9666
Pipe To Tube Straight Adapter

994389666
WG8-06-1-00: RNCC: 3 | RNVC: 2
AM8-4MSCR-5J: RNCC: 5 | RNVC: 1

15 Aug 1991

4730-99-420-4948
Tube Cap

994204948
CP-DP50-65-90: RNCC: 3 | RNVC: 2
DP50-65-90: RNCC: 5 | RNVC: 1
DP50-65-90 ITEM 3: RNCC: 5 | RNVC: 2
DP50-65-90/3: RNCC: 5 | RNVC: 2

15 Nov 1993

4730-99-764-2674
Thermal Penetration

997642674
SSN07/Y/167/065/600: RNCC: 3 | RNVC: 1
001147678: RNCC: 5 | RNVC: 1
Y/167/065/600: RNCC: 5 | RNVC: 1
QCA/SSN07/Y/167/065/600: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-769-1690
Pipe Elbow Adaptor

997691690
1062 DLO 16: RNCC: 3 | RNVC: 2
926-229274: RNCC: 6 | RNVC: 9
H926-229274: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-554-2684
Ruff

995542684
46,012/4: RNCC: 3 | RNVC: 2
46012/4: RNCC: 5 | RNVC: 2
H606-327145: RNCC: 6 | RNVC: 9

11 Dec 1989

4730-99-396-2040
Fluid Orifice Plate

993962040
30047529: RNCC: 3 | RNVC: 2
STD/10000444: RNCC: 5 | RNVC: 1

16 Mar 2011

4730-99-791-3180
Sediment Strainer

997913180
UX60305AR: RNCC: 3 | RNVC: 2
001308841: RNCC: 5 | RNVC: 1
UX60305AR/ATOM: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-131-7579
Adapter

991317579
A07JF06BM: RNCC: 3 | RNVC: 2
01538: RNCC: 5 | RNVC: 1

19 Jan 1994

4730-99-963-4915
Fluid Passage Bolt

999634915
MM618: RNCC: 3 | RNVC: 2
0MM618: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-993-1197
Tube Elbow

999931197
60610: RNCC: 3 | RNVC: 9
2500601574: RNCC: 5 | RNVC: 2
10910349: RNCC: 5 | RNVC: 9

28 Sep 2011

4730-99-968-2939
Clamp

999682939
C3918521: RNCC: 3 | RNVC: 2

16 Jun 1998

4730-99-968-2299
Gland Drain Adaptor

999682299
110645-157: RNCC: 3 | RNVC: 2
26VC23216: RNCC: 6 | RNVC: 9

24 Jan 2002

4730-99-988-4073
Pipe To Tube Straight Adapter

999884073
268L63413-M00: RNCC: 3 | RNVC: 2

17 Jul 2000

4730-99-593-8522
Pipe Nipple

995938522
EP530T10: RNCC: 3 | RNVC: 2

16 Dec 1994

4730-99-810-8163

4730-99-803-0545
Metallic Bent Pipe

4730-99-552-8726

4730-99-817-8291

4730-99-817-9118

4730-99-825-7456
Hose Lagging

4730-99-556-8330

4730-99-821-1889

4730-99-811-9766
Compression Sleeve

4730-99-560-3200

4730-99-552-7715

4730-99-556-9736
Pip Expansion Joint

4730-99-457-3071
Lubrication Fitting

994573071
LN030081: RNCC: 3 | RNVC: 2
LN030081: RNCC: 5 | RNVC: 2

27 Oct 1993

4730-99-535-2686
Connector

995352686
A2H 70125: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-477-6804
Flexi Hose

994776804
M2825067220000: RNCC: 3 | RNVC: 2

10 Feb 2012

4730-99-325-7869

4730-99-413-7873
Union Thread Piece

4730-99-206-1900
Elbow Adaptor

4730-99-536-3254
Fluid Flow Restrictor

995363254
TZ445176: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-767-8376
Fluid Passage Bolt

997678376
587502: RNCC: 3 | RNVC: 2

23 Apr 1985

4730-99-767-9193
Tube Coupling Inverted Nut

997679193
0571346: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-623-7735
Quick Coupling Half

996237735
TTC1030: RNCC: 3 | RNVC: 2
BW206882: RNCC: 5 | RNVC: 2

10 Sep 1992

4730-99-131-8002
Hose Plug

991318002
1110-064: RNCC: 3 | RNVC: 2
1110-A05 ITEM 1: RNCC: 5 | RNVC: 2
1110-A05/1: RNCC: 5 | RNVC: 2
UWS4B1: RNCC: 6 | RNVC: 9

1 Oct 2003

4730-99-773-9586
Pipe Reducer

997739586
1062 TS 1185: RNCC: 3 | RNVC: 2
1062/TS 1185: RNCC: 5 | RNVC: 2
H926-218810: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-741-9338
Pintle Boss

997419338
020 019 748 SHEET 07: RNCC: 3 | RNVC: 2
020 019 748/07: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-977-6672
Pipe Reducer

999776672
EAG5592-11-1406: RNCC: 3 | RNVC: 2
AS43101-1406: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-910-4742
Tube Reducer

999104742
FMR-28-42(304): RNCC: 3 | RNVC: 2
FMR-28-42: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-776-8133
Pipe To Tube Straight Adapter

997768133
SSN07/W/550/00/5/16: RNCC: 3 | RNVC: 2
W/550/00/5/16: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-767-4715
Coupling Sleeve

997674715
MF/00125/CN/006/01: RNCC: 3 | RNVC: 2
004-465-478: RNCC: 5 | RNVC: 1
004465478: RNCC: 5 | RNVC: 1
MF/125/CN/006/01: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-780-7543
Union Nut

997807543
SSN.07/Y/274/574/002: RNCC: 3 | RNVC: 2
Y/274/574/002: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-716-7572

4730-99-842-6842

4730-99-742-9267
Fluid Passage Bolt

4730-99-751-3556

4730-99-751-3733

4730-99-718-0200
Pipe Straight Adapter

4730-99-563-0140
Tube Reducer

4730-99-561-6141

4730-99-561-8441

4730-99-553-1477
Tube Cap

995531477
EP537S08W: RNCC: 3 | RNVC: 2
R74117PS08W: RNCC: 5 | RNVC: 2
R74117PS08W: RNCC: 5 | RNVC: 2

7 Jun 2003

4730-99-613-6371
Quick Disconnect Coupling Half

996136371
1002679137: RNCC: 3 | RNVC: 2

18 Jul 2011

4730-99-151-4328
Pipe To Hose Straight Adapter

991514328
291171028: RNCC: 3 | RNVC: 2

27 Oct 2009

4730-99-502-3039
Soil Pipe Reducer

995023039
MKS4: RNCC: 3 | RNVC: 2
72760003: RNCC: 5 | RNVC: 2
2500601378: RNCC: 5 | RNVC: 2

22 Sep 2011

4730-99-814-7985
Pipe Connector

998147985
FV701250: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-745-7926

4730-99-741-8755
Pipe Straight Adapter

4730-99-161-4444
Tube Lateral

991614444
8251838289: RNCC: 3 | RNVC: 2

17 Feb 2010

4730-99-151-5726
Tube Tee

991515726
VDS/AUK.428.100.214: RNCC: 3 | RNVC: 2

22 Feb 2010

4730-99-885-0760
Fluid Flow Restrictor

998850760
UX60679/ATOM: RNCC: 3 | RNVC: 2
UX60679: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-774-3252
Pipe Coupling

997743252
1066 ETS 168: RNCC: 3 | RNVC: 2
1066/ETS/168: RNCC: 5 | RNVC: 2
H926-279345: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-910-5418
Pipe Reducer

999105418
SF/212/CP/005: RNCC: 3 | RNVC: 1
004461914: RNCC: 5 | RNVC: 1
QCA/SF/212/CP/005: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-554-5268
Pipe To Tube Straight Adapter

995545268
107-105: RNCC: 3 | RNVC: 1
002567202: RNCC: 5 | RNVC: 1
MCM/177/02/001: RNCC: 5 | RNVC: 1
MCM/177/02/001 ITEM 109: RNCC: 5 | RNVC: 2
MCM/177/02/001/109: RNCC: 5 | RNVC: 2
MCM/177/02/001/31: RNCC: 5 | RNVC: 2
002567202 ITEM 109: RNCC: 5 | RNVC: 2
002567202 ITEM 31: RNCC: 5 | RNVC: 2
MCM/177/02/001 ITEM 31: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-663-3931
Instantaneous Femal

996633931
13/Y/158/0020/5000/000 PART FC5-: RNCC: 3 | RNVC: 1
Y/158/0020/5000/000 PART FC5226: RNCC: 5 | RNVC: 1
Y/158/0020/5000/000/FC5226: RNCC: 5 | RNVC: 1
001208948: RNCC: 5 | RNVC: 1
13/Y/158/0020/5000/000: RNCC: 5 | RNVC: 1
13/Y/158/0020/5000/000/FC5226: RNCC: 5 | RNVC: 2
001208948/FC5226: RNCC: 5 | RNVC: 2

8 Jun 1996

4730-99-282-2275
Pipe Tee Adaptor

992822275
SF/327/CN/005: RNCC: 3 | RNVC: 2
004462211 SHEET 01: RNCC: 5 | RNVC: 2
004462211: RNCC: 5 | RNVC: 2
004462211/01: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-517-3503
Tube To Boss Straight Adapter

995173503
MF/01009/CP/030: RNCC: 3 | RNVC: 2
004469810: RNCC: 5 | RNVC: 2

21 Jan 1997

4730-99-253-8863
Pipe Tee

992538863
CH/X/551/4HB6/3300/1: RNCC: 3 | RNVC: 2
004422921: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-251-0153
Fluid Flow Restrictor

992510153
VA2-060F: RNCC: 3 | RNVC: 1
1-32121: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-258-8904
Sediment Strainer Element

992588904
3657/3: RNCC: 3 | RNVC: 2
3657 PART 3: RNCC: 5 | RNVC: 2

23 Aug 2000

4730-99-502-2468
Union Nut

995022468
M16NCRH: RNCC: 3 | RNVC: 2
WL8-100-1-00: RNCC: 5 | RNVC: 2

3 Oct 2001

4730-99-190-7017
Adaptor

991907017
110087-1683: RNCC: 3 | RNVC: 2
26VC-769: RNCC: 6 | RNVC: 9

16 Jan 2002

4730-99-517-5797
Quick Disconnect Coupling Half

995175797
Q29: RNCC: 3 | RNVC: 2

23 Aug 2010

4730-99-554-9876
Double Connector

4730-99-556-5440

4730-99-519-7253

4730-99-550-4630

4730-99-662-9151
Metallic Bent Pipe

4730-99-720-7458

4730-99-550-4900

4730-99-200-3141

4730-99-148-8115
Tube Nipple

4730-99-417-5785

4730-99-207-8570

4730-99-152-8790
Tube Elbow

991528790
428.100.196: RNCC: 3 | RNVC: 2

20 Jan 2012

4730-99-104-4624
Pipefitting Flared Insert

991044624
61487: RNCC: 3 | RNVC: 2
36DE3121: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-679-9107
Pipe Coupling

996799107
12016542: RNCC: 3 | RNVC: 2
2500602564: RNCC: 5 | RNVC: 2

27 Jun 2011

4730-99-599-0216
Sediment Strainer

995990216
M23115: RNCC: 3 | RNVC: 2

14 Jan 2000

4730-99-253-9391
Tube Reducer

992539391
41031571: RNCC: 3 | RNVC: 2
CV160392: RNCC: 5 | RNVC: 2

5 Nov 2009

4730-99-464-3676
Connector

994643676
M2815002420000: RNCC: 3 | RNVC: 2

11 Apr 2013

4730-99-553-8573
Connector

995538573
M2815039620100: RNCC: 3 | RNVC: 2

11 Apr 2013

4730-99-371-1616
Suction Strainer

993711616
POG082222: RNCC: 3 | RNVC: 2

2 Jul 2007

4730-99-800-3307

4730-99-768-4153
Pipe Elbow Adaptor

4730-99-749-4917
Tube Tee

997494917
TR15/12/15LCF: RNCC: 3 | RNVC: 2
40005199: RNCC: 5 | RNVC: 2

17 Dec 2012

4730-99-892-4608
Pipe Flange

998924608
BS4504-112-PN40-DN65-A1: RNCC: 4 | RNVC: 1
15131566: RNCC: 5 | RNVC: 2
TT8880345: RNCC: 6 | RNVC: 9
1034/05: RNCC: 6 | RNVC: 9

9 Jun 2005

4730-99-422-1981
Nozzle

994221981
N1/4SS: RNCC: 3 | RNVC: 2
G3 400 103 2175 DT: RNCC: 5 | RNVC: 2

15 Feb 2006

4730-99-719-6021
Pipe Elbow Adaptor

997196021
W1S7609BSH2-61: RNCC: 3 | RNVC: 2
W1S7609B2-61: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-831-8945
Non-Metallic Connecting Sleeve

998318945
BAS160-5-4-28-11: RNCC: 3 | RNVC: 2
BAS160-5-4-1,75IN-2,75: RNCC: 5 | RNVC: 2
BAS160-5-4-1,75INI.D.-2,75INLONG: RNCC: 6 | RNVC: 9

20 Sep 1995

4730-99-874-0915
Fluid Pressure Line Multiple Connector

998740915
AD/X/208254: RNCC: 3 | RNVC: 2
MR/0/220065 ITEM 6.1: RNCC: 5 | RNVC: 2
MR/0/220065/6.1: RNCC: 5 | RNVC: 2

29 Oct 2007

4730-99-660-3754
Hose Clamp

996603754
EN4234L045-SA: RNCC: 2 | RNVC: 2

24 Mar 2000

4730-99-538-4720
Pi Straight Adapter

995384720
NM635051: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-742-6361
Pipe Straight Adapter

4730-99-761-7771
Pipe Tee Adaptor

4730-99-430-3430

4730-99-431-1889

4730-99-786-6675
Lubrication Fitting

997866675
LN030091: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-104-3900
Fluid Pressure Line Multiple Connector

991043900
N8694: RNCC: 3 | RNVC: 2
36DE1421: RNCC: 6 | RNVC: 9
36DE1421: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-780-7552
Pipe To Tube Straight Adapter

997807552
020030980: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-827-6782
Pipe Reducer

998276782
41003821: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-827-6868
Pipe To Hose Straight Adapter

998276868
42784127: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-529-0831
Brazing-Soldering Pipe Fitting Insert

995290831
75GHD: RNCC: 3 | RNVC: 1
22MMX11NBSP: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-449-6162
Hose Clamp

994496162
AGS1000: RNCC: 4 | RNVC: 1
BK20660: RNCC: 5 | RNVC: 2
36DT37: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-373-0230
Pipe To Tube Straight Adapter

993730230
FV 2094498: RNCC: 3 | RNVC: 2
FV 2094498: RNCC: 5 | RNVC: 2

28 Aug 1991

4730-99-192-0398
Pipe To Hose Straight Adapter

991920398
FV 2064781: RNCC: 3 | RNVC: 2
FV 2064781: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-238-2343
Soil Pipe Reducer

992382343
MKS1: RNCC: 3 | RNVC: 2
72720001: RNCC: 5 | RNVC: 2
2500601677: RNCC: 5 | RNVC: 2

22 Sep 2011

4730-99-192-3246
Sediment Strainer Element

991923246
Y1888/1/A3 ITEM 3: RNCC: 3 | RNVC: 2
Y1888/1/A3/125MM/3: RNCC: 5 | RNVC: 2
Y1888/1/A3/3: RNCC: 5 | RNVC: 2

4 Dec 1991

4730-99-225-7707
Split Union End

992257707
5/1005: RNCC: 3 | RNVC: 2
1-15056/2: RNCC: 5 | RNVC: 2
1-15056 ITEM 2: RNCC: 5 | RNVC: 2

23 Feb 2002

4730-99-149-4414
Non-Metallic Connecting Sleeve

991494414
BAS162-7-2-1-4: RNCC: 3 | RNVC: 2
BAS44-GS-C-112-21/4INS: RNCC: 5 | RNVC: 2
26VC-15037: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-778-1144
Pipe To Hose Straight Adapter

997781144
13/Y/550/0000/1292/000: RNCC: 3 | RNVC: 2
001208214: RNCC: 5 | RNVC: 1
13Y55000001292000: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-523-4484
Tube Nipple

995234484
A16BPR: RNCC: 3 | RNVC: 2
85-57-10-2-20785: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-200-6624
Pipe Coupling

992006624
3G10-1: RNCC: 3 | RNVC: 2
7070-0105: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-773-9632
Flange Adaptor

997739632
1074 F042: RNCC: 3 | RNVC: 2
1074/F042: RNCC: 5 | RNVC: 2
103/1074 F042: RNCC: 5 | RNVC: 2
H926-232811: RNCC: 6 | RNVC: 9
LE463B1: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-909-5727
Sediment Strainer

999095727
MX/00841/AZ/009/000: RNCC: 3 | RNVC: 2
004469019: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-559-2796
Fluid Flow Restrictor

995592796
258621: RNCC: 3 | RNVC: 2
258621-199: RNCC: 5 | RNVC: 2
H929-328077: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-665-5542
Pipe Tee

996655542
110087-1421: RNCC: 3 | RNVC: 2
26VC-20827: RNCC: 6 | RNVC: 9

7 Feb 2002

4730-99-199-2146
Pipe To Tube Straight Adapter

991992146
01533: RNCC: 3 | RNVC: 2
BJMFA-2A: RNCC: 5 | RNVC: 1
EJ9: RNCC: 5 | RNVC: 2
7776292: RNCC: 6 | RNVC: 9

23 Jan 1996

4730-99-530-5503
Pipe To Tube Straight Adapter

995305503
SF/067/CG/017: RNCC: 3 | RNVC: 2
004461755: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-284-3339
Pipe Coupling

992843339
NO PRIMARY REF 99-284-3339: RNCC: 3 | RNVC: 2
L33514: RNCC: 5 | RNVC: 2

8 Mar 2010

4730-99-977-6712
Tube Reducer

999776712
AS43191-2205: RNCC: 2 | RNVC: 2

25 Apr 1991

4730-99-770-7073
Pipe Bushing

997707073
AL32163: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-772-7328
Sleeve Coupling

997727328
FV1802255: RNCC: 3 | RNVC: 2
K6121H: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-772-6937
Pipe Plug

997726937
148: RNCC: 3 | RNVC: 1

25 Apr 1991

4730-99-957-4989
Sediment Strainer

999574989
K22116: RNCC: 3 | RNVC: 2

7 Apr 1997

4730-99-774-0024
Pipe To Tube Straight Adapter

997740024
CV5126: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-767-8868
Quick Disconnect Coupling Half

997678868
103201155: RNCC: 3 | RNVC: 2

7 Feb 2006

4730-99-774-0088
Pipe To Tube Straight Adapter

997740088
CV6665: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-774-0485
Fluid Pressure Line Multiple Connector

997740485
CF3810297: RNCC: 3 | RNVC: 2
J24322S: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-774-5200
Union Nut

997745200
1044H017: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-767-9158
Fluid Pressure Line Multiple Connector

997679158
JJ108204: RNCC: 3 | RNVC: 2
JJ108204: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-732-8157
Fluid Flow Restrictor

997328157
JJ112170: RNCC: 3 | RNVC: 2
JJ112170: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-633-2659
Sediment Strainer

996332659
HC 102436: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-208-0039
Four Way Connector

992080039
37753021: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-500-4845
Adaptor

995004845
69302377: RNCC: 3 | RNVC: 2
FF962J30015: RNCC: 6 | RNVC: 9

15 Jun 1996

4730-99-272-3092
Pipe Union

992723092
04 350 295: RNCC: 3 | RNVC: 2

10 Aug 2011

4730-99-771-3165
Tube Nipple

997713165
530400: RNCC: 3 | RNVC: 2
B76599: RNCC: 5 | RNVC: 9
B76599: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-551-8198
Tube Swivel Joint

995518198
ND2019: RNCC: 3 | RNVC: 2

6 Apr 2010

4730-99-541-0588
Union Nut

995410588
001000807: RNCC: 3 | RNVC: 1
GD1288: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-471-5809
Pipe Nipple

994715809
5253640: RNCC: 3 | RNVC: 2

1 Jun 2011

4730-99-893-0064
Quick Disconnect Coupling Half

998930064
HTE8704: RNCC: 3 | RNVC: 2
238424: RNCC: 5 | RNVC: 2

4 Dec 1989

4730-99-881-6395
Pipe Elbow Adaptor

998816395
FV513406: RNCC: 3 | RNVC: 2
X88243935: RNCC: 5 | RNVC: 2
88243935: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-424-4204
Anchor And Reinforcement Pipe Clamp

994244204
A199971: RNCC: 3 | RNVC: 2
A199971: RNCC: 5 | RNVC: 9
26FX5137: RNCC: 6 | RNVC: 9
26FX5137: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-255-4342
Cap

992554342
2927K200: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-866-6013
Tube Reducer

4730-99-862-2943
Pipe Reducer

4730-99-900-8363

4730-99-896-0031

4730-99-877-7668
Pipe Reducer

4730-99-942-7996

4730-99-943-3597

4730-99-630-6412
Pipe Straight Adapter

4730-99-554-8824
Tube Elbow

4730-99-548-8139
Double-Ended Union

995488139
RUB3796: RNCC: 3 | RNVC: 2
CP1820: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-570-0957
Pipe Expansion Joint

995700957
EJ01000164: RNCC: 3 | RNVC: 2
X0100BACC0000000000010132: RNCC: 5 | RNVC: 2

19 Feb 1992

4730-99-130-2024
Pipe Swivel Joint

991302024
6509E: RNCC: 3 | RNVC: 2
6509E: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-425-8410
Conn Rib 25 Sts

994258410
M2815041820000: RNCC: 3 | RNVC: 2

23 May 2012

4730-99-735-9900
Pipe To Tube Straight Adapter

997359900
1076 MW 240: RNCC: 3 | RNVC: 2
MW 240: RNCC: 5 | RNVC: 1
H926-380437: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-508-2926
Tube Elbow

995082926
NO PRIMARY REF 99-508-2926: RNCC: 3 | RNVC: 2
954356: RNCC: 5 | RNVC: 2

8 Mar 2010

4730-99-548-7266
Pipe To Tube Straight Adapter

995487266
154-272-17: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-981-9480
Hose Clamp

999819480
81-000376: RNCC: 3 | RNVC: 2

25 Apr 2012

4730-99-528-4644
Union Nut And Nippl

995284644
SSN07Y560-105: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-151-9033
Tube

991519033
NO PRIMARY REF 99-151-9033: RNCC: 3 | RNVC: 2
1105-033: RNCC: 5 | RNVC: 2
1105-033: RNCC: 5 | RNVC: 9

9 Dec 2010

4730-99-546-8040
Pipe To Tube Straight Adapter

995468040
A277932: RNCC: 3 | RNVC: 2
710-303781: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-554-2450
Pipe Plug

995542450
BF25913: RNCC: 3 | RNVC: 1

25 Apr 1991

4730-99-635-5108
Pipe Plug

996355108
30816: RNCC: 3 | RNVC: 2
0076: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-721-7183
Hose Tee

997217183
C15644: RNCC: 3 | RNVC: 2
C15644L: RNCC: 5 | RNVC: 2
DNG10010: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-719-1266
Tube Elbow

997191266
V102081: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-425-9176
Connector

994259176
M2815011600000: RNCC: 3 | RNVC: 2

11 Apr 2013

4730-99-739-3523
Pipe Straight Adapter

4730-99-739-8382

4730-99-448-8014

4730-99-736-8352

4730-99-739-0708
Pipe Elbow

4730-99-663-3113
Pipe

4730-99-738-9885

4730-99-448-8552
Hydraulic Ferrule

4730-99-761-3855
High Pressu Ferrule

4730-99-701-5804
Hose Clamp

4730-99-764-7215

4730-99-755-7475

4730-99-742-7256
Pipe Bushing

4730-99-758-6977

4730-99-739-3410
Pipe Reducer

4730-99-748-1987

4730-99-755-7494

4730-99-736-6651

4730-99-748-5330
Pipe Nipple

4730-99-392-5398
Pipe Nipple

993925398
11012833: RNCC: 3 | RNVC: 2
2500600187: RNCC: 5 | RNVC: 2

15 Jun 2011

4730-99-824-1816
Tube Cross

998241816
FVS102-5: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-719-3390
Tube To Hose Straight Adapter

997193390
4411-8: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-735-9821
Pipe To Hose Straight Adapter

997359821
26R615: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-730-7248
Tube Coupling Inverted Nut

997307248
0086500336: RNCC: 3 | RNVC: 2
6500336: RNCC: 5 | RNVC: 2
86500336: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-617-5528
Fluid Flow Restrictor

996175528
AX55058: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-253-8861
Pipe To Tube Straight Adapter

992538861
CH/X/551/4HB6/3297/0000: RNCC: 3 | RNVC: 2
004422915: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-850-3514
Inlet Pipe

998503514
NO PRIMARY REF 99-850-3514: RNCC: 3 | RNVC: 2
FTC3387: RNCC: 5 | RNVC: 2
(241)AE095FTC3387: RNCC: 8 | RNVC: 2
FTC3387: RNCC: 8 | RNVC: 2

29 Nov 2001

4730-99-241-6346
Pipe Nipple

992416346
BFBN20: RNCC: 3 | RNVC: 2
TT8880148: RNCC: 6 | RNVC: 9
1162/03: RNCC: 6 | RNVC: 9

17 Dec 2003

4730-99-131-4652
Hose Knuckle

991314652
NO PRIMARY REF 99-131-4652: RNCC: 3 | RNVC: 2
H4: RNCC: 5 | RNVC: 2
TT4449053: RNCC: 6 | RNVC: 9

15 Aug 2002

4730-99-774-3133
Tube Fitting Brazing Ferrule

997743133
1062 ETS 243: RNCC: 3 | RNVC: 2
1062/ETS 243: RNCC: 5 | RNVC: 2
H926-218782: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-773-7010
Pipe Tee

997737010
1074/P0.81: RNCC: 3 | RNVC: 2
1074 P0.81: RNCC: 5 | RNVC: 2
H926-282570: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-775-9405
Flange Elbow

997759405
1074 BS 2F: RNCC: 3 | RNVC: 2
SSBN01/508/857: RNCC: 5 | RNVC: 1
001112498/CS1: RNCC: 5 | RNVC: 1
H926-301171: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-789-4191
Pipe To Tube Straight Adapter

997894191
WG1368-0160-101: RNCC: 3 | RNVC: 2
85-801-1736: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-779-8784
Pipe Elbow Adaptor

4730-99-796-1217
Pipe To Hose Elbow

4730-99-779-6640

4730-99-761-3859
Sleeve

4730-99-779-9140
Pipe Tee

4730-99-781-0135

4730-99-781-3506
Pipe Straight Adapter

4730-99-744-4028
Piping

4730-99-420-2972

4730-99-134-6319
Pipe Reducer

4730-99-942-7950

4730-99-744-5625

4730-99-750-0070
Pipe Reducer

4730-99-490-4092
Retai Swivel Flange

994904092
25000520: RNCC: 3 | RNVC: 2
023YO-008: RNCC: 6 | RNVC: 9
023SA-106: RNCC: 6 | RNVC: 9

6 Dec 2002

4730-99-521-3918
Collet

995213918
NO PRIMARY REF 99-521-3918: RNCC: 3 | RNVC: 2
6R: RNCC: 5 | RNVC: 2
775046: RNCC: 5 | RNVC: 2
529-463403: RNCC: 6 | RNVC: 9
H529-463403: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-214-4469
Lubrication Fitting

992144469
9015766: RNCC: 3 | RNVC: 2
H404: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-667-8185
Pipe To Boss Tee

996678185
816/90669: RNCC: 3 | RNVC: 2

14 Dec 2010

4730-99-613-6824
Connector

996136824
M2825001520000: RNCC: 3 | RNVC: 2

10 Nov 2011

4730-99-553-1099
Pipe Repair Clamp

995531099
1300X304WA/TLG: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-414-3501
Fluid Pressure Line Multiple Connector

994143501
526Y3: RNCC: 3 | RNVC: 2
27Q10703: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-214-2642
Pipe Plug

992142642
GMB86511B: RNCC: 3 | RNVC: 9

25 Apr 1991

4730-99-810-8548

4730-99-802-4204

4730-99-810-1430

4730-99-614-7214
Sediment Strainer Element

996147214
4904001250: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-350-3479
Coupling

993503479
C.200924: RNCC: 3 | RNVC: 2

16 Mar 1998

4730-99-961-3899
Magnetic Pipe Plug

999613899
UCD0002733: RNCC: 3 | RNVC: 2

12 Dec 2009

4730-99-464-9577
Connector

994649577
M2825021520000: RNCC: 3 | RNVC: 2

10 Feb 2012

4730-99-123-6860
Fluid Passage Bolt

991236860
6AWF567A1: RNCC: 3 | RNVC: 2
26DL14218: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-109-0265
Fluid Pressure Line Multiple Connector

991090265
B385162: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-711-5899
Tube Reducer Body

4730-99-600-6580
Je Drain Connection

996006580
6M4E809A: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-915-6224
Pipe Straight Adapter

4730-99-591-2645
Pipe Straight Adapter

4730-99-200-3899
Fluid Pressure Line Multiple Connector

992003899
445-92: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-542-0803
Union Tailpiece

995420803
34366-149: RNCC: 3 | RNVC: 2
34366-149-9: RNCC: 5 | RNVC: 2
H474-302282: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-131-3076
Tube Clinch Sleeve

991313076
ZJEF003698LOK-ITEM-104: RNCC: 3 | RNVC: 2
ZJEF003698LOK/104: RNCC: 5 | RNVC: 2

27 Feb 2002

4730-99-836-3171
Connector

998363171
41024873: RNCC: 3 | RNVC: 2
990-09-001: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-781-2110
Pipe Union

997812110
1066 GM 35: RNCC: 3 | RNVC: 2
1066/GM/35: RNCC: 5 | RNVC: 2
H926-303406: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-719-7074
Pipe To Hose Straight Adapter

997197074
PT8808: RNCC: 3 | RNVC: 2
304ABRASS: RNCC: 5 | RNVC: 2
021.001.00: RNCC: 5 | RNVC: 2
500-034-130: RNCC: 5 | RNVC: 2
HZ009025: RNCC: 5 | RNVC: 2
99-853-3350: RNCC: 6 | RNVC: 9
BR32A1A: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-839-8222
Pipe To Hose Straight Adapter

998398222
3005254: RNCC: 3 | RNVC: 2
B32178-16: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-531-3158
Pipe To Hose Elbow

995313158
560561-20: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-153-1695
Connector

991531695
M2825023600100: RNCC: 3 | RNVC: 2

12 Jun 2012

4730-99-220-3287
Pipe Elbow Adaptor

992203287
0P16813: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-548-8151
Pipe To Tube Straight Adapter

995488151
RUB3808: RNCC: 3 | RNVC: 2
CP2389: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-719-4518
Pipe Elbow Adaptor

997194518
AK58A829: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-541-0647
Pipe Nipple

995410647
001000817: RNCC: 3 | RNVC: 1
GD1342: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-949-4803

4730-99-241-7242
Hose Clamp

992417242
LR004362: RNCC: 3 | RNVC: 2

12 Jul 2010

4730-99-525-1724
Pipe Elbow Adaptor

995251724
A8-12UNMER5BSTA1NLESS: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-556-7071
Pipe Reducer

995567071
M29812: RNCC: 3 | RNVC: 2
270097: RNCC: 5 | RNVC: 2
768-160415: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-867-1437
Pipe To Tube Straight Adapter

998671437
7068-3: RNCC: 3 | RNVC: 2
AW215920: RNCC: 3 | RNVC: 2
234-8966: RNCC: 5 | RNVC: 2
SP23-68: RNCC: 5 | RNVC: 2
3215920: RNCC: 5 | RNVC: 2
AW215820: RNCC: 6 | RNVC: 9
LV8REMGAW215920: RNCC: 6 | RNVC: 9
H964-943605: RNCC: 6 | RNVC: 9
LE463B1: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-811-1388
Hose Coupling

998111388
1265-16: RNCC: 3 | RNVC: 2
9-013-990007: RNCC: 5 | RNVC: 2
FH970AA0012: RNCC: 6 | RNVC: 9

8 Sep 1997

4730-99-530-5561
Pipe To Tube Straight Adapter

995305561
SSN07W552-00-5-19: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-556-6872
Union Tailpiece

995566872
46-010-1: RNCC: 3 | RNVC: 2
46010-1: RNCC: 5 | RNVC: 2
H606-156326: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-212-8019
Pipe To Tube Straight Adapter

992128019
110087-4063: RNCC: 3 | RNVC: 2
26VC21967: RNCC: 6 | RNVC: 9

30 Jan 2002

4730-99-213-2582
Tube Elbow

992132582
816/90676: RNCC: 3 | RNVC: 2

21 Jan 2009

4730-99-152-2033
Pipe Tee

991522033
12012213: RNCC: 3 | RNVC: 2
2500600013: RNCC: 5 | RNVC: 2

24 Jun 2011

4730-99-427-5190
Anchor And Reinforcement Pipe Clamp

994275190
F223747: RNCC: 3 | RNVC: 2
F223747: RNCC: 3 | RNVC: 9
26FX9471: RNCC: 6 | RNVC: 9
26FX9471: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-112-9756
Pipe Nipple

4730-99-097-6684
Quick Disconnect Coupling Half

990976684
19 16 47: RNCC: 3 | RNVC: 2

2 Nov 1996

4730-99-123-3896
Fluid Passage Bolt

991233896
11158Y002: RNCC: 3 | RNVC: 2
27Q18678: RNCC: 6 | RNVC: 9

29 Jan 1980

4730-99-358-5621
Tube To Boss Straight Adapter

993585621
201328606: RNCC: 3 | RNVC: 2

19 Apr 2000

4730-99-901-6028
Pipe Flange

999016028
DU2972A: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-739-8053
Union

997398053
1809-904M1: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-299-8409
Pipe Reducer

992998409
S1002: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-225-5166
Nipple

992255166
FV 2189262: RNCC: 3 | RNVC: 2
FV 2189262: RNCC: 5 | RNVC: 2

1 Sep 1993

4730-99-882-1573
Adaptor

998821573
QCA/SSBN01/MC/865/3: RNCC: 3 | RNVC: 2
F816-926425: RNCC: 6 | RNVC: 9
J852-926425: RNCC: 6 | RNVC: 9
LE463B1: RNCC: 6 | RNVC: 9

10 May 1996

4730-99-591-2072
Pipeline Flexible Spacer

995912072
001281390 FLEXIBLE 24: RNCC: 3 | RNVC: 1
001281390: RNCC: 5 | RNVC: 1
001281390 SHEET 001: RNCC: 5 | RNVC: 1
001281390/001: RNCC: 5 | RNVC: 1
SSK/Z/520/00/0015: RNCC: 5 | RNVC: 1
SSK/Z/520/00/0015 FLEXIBLE 24: RNCC: 5 | RNVC: 1
SSK/Z/520/00/0015 SHEET 001: RNCC: 5 | RNVC: 1
SSK/Z/520/00/0015/24: RNCC: 5 | RNVC: 1
SSK/Z/520/00/0015 FLEXIBLE 24: RNCC: 5 | RNVC: 1
SSK/Z/520/00/0015/24: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-354-0521
Pipe To Tube Straight Adapter

993540521
SS-20M0-1-8RTFL: RNCC: 3 | RNVC: 2
QCA/SS-20M0-1-8RTFL: RNCC: 5 | RNVC: 2
QCA/SS-20M0-1-8RTFL: RNCC: 5 | RNVC: 2
BFSTL TASK 2 (STAINLESS STEEL): RNCC: 6 | RNVC: 9

7 Jun 2005

4730-99-352-4828
Fluid Orifice Plate

993524828
STD/00027273 ITEM 2: RNCC: 3 | RNVC: 2
STD/00027273/2: RNCC: 5 | RNVC: 2
14669776: RNCC: 5 | RNVC: 2

24 Apr 2008

4730-99-549-5875
Packing Nut

995495875
ID2371/30.2: RNCC: 3 | RNVC: 2

1 May 2003

4730-99-666-1075
Pipe Tee

996661075
QF50001822: RNCC: 3 | RNVC: 2
QF50001822: RNCC: 5 | RNVC: 2
DA24004738 ITEM 5: RNCC: 5 | RNVC: 2
DA24004738/5: RNCC: 5 | RNVC: 2

26 Feb 2004

4730-99-769-7242
Pipe Elbow

997697242
NLW1007: RNCC: 3 | RNVC: 2
E10-10: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-655-0231
Pipe To Tube Straight Adapter

996550231
3801007200: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-709-1507
Tube To Boss Straight Adapter

997091507
10025883: RNCC: 3 | RNVC: 2

2 Sep 2010

4730-99-533-8826
Tube Coupling Inverted Nut

995338826
AS46705: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-716-9348
Pipe Plug

997169348
PE.51123: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-755-1100
Union Tailpiece

4730-99-143-4909

4730-99-135-4875
Pipe Straight Adapter

4730-99-758-1862
Hose Clamp

4730-99-135-4890
Pipe Straight Adapter

4730-99-133-2862

4730-99-305-4360
Manifold Assembly

993054360
H53032001: RNCC: 3 | RNVC: 2
15130704: RNCC: 5 | RNVC: 2

10 Oct 2005

4730-99-684-4246
Adaptor

996844246
ND41588: RNCC: 3 | RNVC: 2

9 Jan 2007

4730-99-532-1365
Pi Straight Adaptor

995321365
31570393: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-254-1631
Pipe Union

992541631
ST039912: RNCC: 3 | RNVC: 2
039912: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-421-9245
Tube Union

994219245
814330032: RNCC: 3 | RNVC: 2
MQ275-7: RNCC: 5 | RNVC: 2

24 Nov 1995

4730-99-598-7747
Coupling

995987747
SFP 4 COMP-B-Q-C: RNCC: 3 | RNVC: 2

18 Feb 1998

4730-99-144-7671
Fluid Passage Bolt

991447671
200391626: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-716-4944
Tube Fitting Brazing Ferrule

997164944
C.81018/B PART 1: RNCC: 3 | RNVC: 2
C.81018: RNCC: 5 | RNVC: 1
C.81018/B: RNCC: 5 | RNVC: 1
C.81018 PART 1: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-149-3716
Non-Metallic Connecting Sleeve

991493716
110004-9753: RNCC: 3 | RNVC: 2
110004/9753: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-554-6296
Flexible Pipe Conne

995546296
SSBN01-508-829: RNCC: 3 | RNVC: 1
508-829: RNCC: 5 | RNVC: 1
001112483: RNCC: 5 | RNVC: 1
QCASSBN01-508-829: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-560-1463
Union Nut

995601463
SSN07/M/601/80/1/114: RNCC: 3 | RNVC: 2
M/601/20/1/129: RNCC: 5 | RNVC: 1
M/601/80/1/114: RNCC: 5 | RNVC: 1
SSN07/M/601/20/1/129: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-530-7271
Pipe To Tube Straight Adapter

995307271
SSN.07/W/523/60/7/1: RNCC: 3 | RNVC: 2
W/523/60/7/1: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-402-9542
Pipe Nipple

994029542
027-02412: RNCC: 3 | RNVC: 2
X3XCLR27-2412: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-975-2038
Complete Adaptor

999752038
LAA182173-01: RNCC: 3 | RNVC: 2
99PE01-206: RNCC: 6 | RNVC: 9

1 Jun 1999

4730-99-867-9616
Pipe To Tube Straight Adapter

998679616
102251028: RNCC: 3 | RNVC: 2
91001546-001: RNCC: 5 | RNVC: 2

8 Aug 2013

4730-99-133-5265
Pipe To Tube Straight Adapter

991335265
SS-12-MTA-1-8RSFL: RNCC: 3 | RNVC: 2
QCA/SS-12MTA-1-8RSFL: RNCC: 5 | RNVC: 2
QCA/SS-12MTA-1-8RSFL: RNCC: 5 | RNVC: 2
BFSTL TASK 2 (STAINLESS STEEL): RNCC: 6 | RNVC: 9

6 Jun 2005

4730-99-299-0760
End F Tube Assembly

992990760
WG1577-0009-041: RNCC: 3 | RNVC: 2

14 May 2010

4730-99-838-4545
Hose Connector

998384545
NO PRIMARY REF 99-838-4545: RNCC: 3 | RNVC: 2
37H7131: RNCC: 5 | RNVC: 9

30 Jul 1981

4730-99-840-2767
Flange Union

998402767
EA7180B011-103: RNCC: 3 | RNVC: 2
QE941ME2014: RNCC: 6 | RNVC: 9

15 Apr 1994

4730-99-839-8208
Pipe To Hose Elbow

998398208
3005219: RNCC: 3 | RNVC: 2
B32977-16: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-051-2138
Pipe Nipple

990512138
HYO 3004: RNCC: 3 | RNVC: 2
32-031: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-133-9774
Pipe Coupling

991339774
70-80-402: RNCC: 3 | RNVC: 2
DML040175: RNCC: 5 | RNVC: 2
70-80-402: RNCC: 5 | RNVC: 2

4 Oct 2007

4730-99-663-8228
Tee

996638228
M25UBTM6-316: RNCC: 3 | RNVC: 2
WE128B: RNCC: 6 | RNVC: 9

17 Oct 1997

4730-99-839-6622
Pipe Tee

998396622
NO PRIMARY REF 99-839-6622: RNCC: 3 | RNVC: 2
231-7726: RNCC: 5 | RNVC: 2
SNA06: RNCC: 5 | RNVC: 9

8 Jul 2011

4730-99-777-6265
Pipe To Hose Straight Adapter

997776265
MF/01014/CN/005: RNCC: 3 | RNVC: 2
004464458: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-786-7184
Pipe Flange

997867184
SF/018/CN/020/02: RNCC: 3 | RNVC: 2
004465517: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-781-2128
Flange Elbow

997812128
1066 SO 65: RNCC: 3 | RNVC: 2
1066/SO/65: RNCC: 5 | RNVC: 2
H926-327879: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-391-2640
Reducer

993912640
103-999-045: RNCC: 3 | RNVC: 2
103-999-045: RNCC: 5 | RNVC: 9

23 Aug 2010

4730-99-353-0902
Tube Nipple

993530902
6F42EDMX-SS: RNCC: 3 | RNVC: 2

17 Apr 2010

4730-99-215-9616
Elbow

992159616
54485222: RNCC: 3 | RNVC: 2
CV153351: RNCC: 5 | RNVC: 2

29 Oct 2008

4730-99-740-1322
Pipe To Tube Straight Adapter

997401322
ND25136: RNCC: 3 | RNVC: 2
ND25136: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-529-2295

4730-99-558-3067
Tube Nipple

4730-99-533-4788
Hose Coupling

4730-99-559-8667
Air Line Manifold

4730-99-902-1258

4730-99-867-4374

4730-99-894-1348
Pipe Straight Adapter

4730-99-998-9174
Retaining Nut

4730-99-827-9420

4730-99-827-1179

4730-99-157-8971
Socket

991578971
12016276: RNCC: 3 | RNVC: 2
TT7779278: RNCC: 6 | RNVC: 9

16 Jan 2002

Load More Results