What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Pipe Bend?

A Return Pipe Bend (BEND,PIPE,RETURN) is a fitting designed to join a pipe in a parallel position to another pipe for reversing the flow of gas, steam, air, or liquids. Excludes BEND, SOIL PIPE.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Soil Pipe Reducer?

A Soil Pipe Reducer (REDUCER,SOIL PIPE) is a straight fitting with the spigot end larger than the hub end. It is used to connect two pieces of soil pipe of different size.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Pipe Lateral?

A Pipe Lateral (LATERAL,PIPE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit pipes and/or pipe fittings to be taken off laterally from the main line. It may have side inlet(s).

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Soil Pipe Lateral?

A Soil Pipe Lateral (LATERAL,SOIL PIPE) is a fitting having one or two branches which are fixed at various angles other than 90 degrees to the run. If item has two branches, they will be located on opposite sides of the run (180 degrees apart) and will be identical. It may have side inlets.

What is a Soil Pipe Tee?

A Soil Pipe Tee (TEE,SOIL PIPE) is a fitting consisting of a run and a branch. The branch may be either curved or straight, but the axis of the end connection intersects the axis of the run at right angles. It may have side inlets.

What is a Tube Coupling Inverted Nut?

A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.

What is a Tube Coupling Nut?

A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.

What is an Union Tailpiece?

An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.

What is an Union Thread Piece?

An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - United Kingdom (UK)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by United Kingdom (UK) - NCB is 99

Page 76 of 242

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by United Kingdom

47	30	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - United Kingdom (UK)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 43 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 608 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 26 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 14 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 16 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
What is a Bulkhead Hose Connector? 44 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 123 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 192 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 30 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Cap? 97 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 18 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 1095 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 322 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 1326 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 970 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 64 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Pipe To Hose Straight Adapter? 986 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 8242 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 197 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Pipe Bushing? 294 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Hose Nipple? 57 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 1594 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 953 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 86 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 586 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Tube Union? 47 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 172 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Pipe Bend? 11 Items: A Return Pipe Bend (BEND,PIPE,RETURN) is a fitting designed to join a pipe in a parallel position to another pipe for reversing the flow of gas, steam, air, or liquids. Excludes BEND, SOIL PIPE.
What is a Return Tube Bend? 18 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 33 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 131 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Soil Pipe Reducer? 28 Items: A Soil Pipe Reducer (REDUCER,SOIL PIPE) is a straight fitting with the spigot end larger than the hub end. It is used to connect two pieces of soil pipe of different size.
What is a Pipe Flange? 1150 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Machine Thread Plug? 108 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Pipe Lateral? 30 Items: A Pipe Lateral (LATERAL,PIPE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit pipes and/or pipe fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Tube Lateral? 16 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 122 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 2442 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 18 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 312 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Tube Tee? 892 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Soil Pipe Lateral? 30 Items: A Soil Pipe Lateral (LATERAL,SOIL PIPE) is a fitting having one or two branches which are fixed at various angles other than 90 degrees to the run. If item has two branches, they will be located on opposite sides of the run (180 degrees apart) and will be identical. It may have side inlets.
What is a Soil Pipe Tee? 10 Items: A Soil Pipe Tee (TEE,SOIL PIPE) is a fitting consisting of a run and a branch. The branch may be either curved or straight, but the axis of the end connection intersects the axis of the run at right angles. It may have side inlets.
What is a Tube Coupling Inverted Nut? 365 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Tube Coupling Nut? 113 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is an Union Tailpiece? 217 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 61 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Pipe Swivel Joint? 56 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 525 Items
What is a Sediment Strainer? 692 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 24 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 54 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 16 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 228 Items
What is a Pipe Repair Clamp? 51 Items: A Pipe Repair Clamp (CLAMP,REPAIR,PIPE) is a one-piece or two-piece metal clamp generally used with gasket(s) and designed to repair longitudinal splits and pit holes and/or to support thin walls in a straight run of pipe. See also CLAMP, LEAK REPAIR, PIPE COUPLING.
What is a Pipe Cap? 247 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 238 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 14 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 1072 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 1811 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 551 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
What is a Hose Reducer? 41 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 2097 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 1319 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Pipe Cross? 115 Items: A Pipe Cross (CROSS,PIPE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is designed to be used as a junction at the intersection of pipe and/or pipe fittings.
What is a Pipe To Tube Cross? 58 Items: A Pipe To Tube Cross (CROSS,PIPE TO TUBE) is a fitting having four branches in the same plane whose axes form right angles. One or more of the connections have standard pipe threads or are unthreaded and designed to accommodate a pipe. The remaining connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It may have side inlet(s).
What is a Tube Cross? 86 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Spool Piece? 28 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Water Closet Bend? 10 Items: A Water Closet Bend (BEND,WATER CLOSET) is a waste line fitting designed for use with a water closet, to provide a means of connecting a water closet bowl to a waste line.
What is a Pipe Locknut? 74 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 21 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Drainage Pipe Lateral? 23 Items: A Drainage Pipe Lateral (LATERAL,DRAINAGE PIPE) is a fitting having one or two branches which are fixed at various angles other than 90 degrees (1.5705 radians) to the run. It is used as a junction at the intersection of a drainage line and is provided with a shoulder(s) at the end(s) of its internal threaded or unthreaded portion, conforming to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It may have side inlet(s).
What is a Hose Clamp? 1782 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is a Fuel Feeder Manifold? 10 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Soil Pipe Plug? 10 Items: A Soil Pipe Plug (PLUG,SOIL PIPE) is a fitting designed to fit into the hub end of soil pipe or a soil pipe fitting for sealing.
What is a Pipe Clamp Coupling? 59 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is an Air Line Manifold? 48 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 17 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 153 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 186 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 570 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 70 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 522 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 24 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 565 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Elbow Assembly? 11 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Fluid Flow Restrictor? 857 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 36 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Self-Sealing Coupling Half? 218 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 11 Items
What is a Drainage Pipe Elbow? 29 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Pipe True Wye? 40 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 20 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 24 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Sediment Strainer Element? 1052 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 1394 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 1435 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1839 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 139 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is an Union Nut? 1395 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Quick Disconnect Coupling Assembly? 63 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 63 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 20 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Magnetic Pipe Plug? 43 Items: A Magnetic Pipe Plug (PLUG,PIPE,MAGNETIC) is a pipe fitting primarily designed for installation in a lubrication or hydraulic system. It has an integral magnet in the body and external pipe threads.
What is a Hose To Boss Straight Adapter? 51 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 242 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 473 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 37 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 13 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Pipe To Boss Elbow? 20 Items: A Pipe To Boss Elbow (ELBOW,PIPE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a pipe or pipe fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like. See also ELBOW, PIPE; and ELBOW, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Boss Elbow? 66 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 44 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Pipe To Boss Tee? 10 Items: A Pipe To Boss Tee (TEE,PIPE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a pipe or pipe fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Tube To Boss Tee? 35 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 59 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Boss Nipple? 29 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Pipe Outlet? 23 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 23 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 26 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Hose Straight Adapter? 110 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 86 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 57 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Flange Elbow? 169 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 11 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 18 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Pipe Elbow? 65 Items: A Flange To Pipe Elbow (ELBOW,FLANGE TO PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 118 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Flange Tee? 38 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Soil Pipe Coupling? 21 Items: A Soil Pipe Coupling (COUPLING,SOIL PIPE) is a straight fitting used to connect two pieces of soil pipe of the same size.
What is a Quick Disconnect Plug? 17 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Suction Strainer? 51 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Coupling Swage Ferrule? 19 Items: A Tube Coupling Swage Ferrule (FERRULE,SWAGE,TUBE COUPLING) is a flanged cylindrical metallic item used with a plain end tube and swaged in place. It is designed to be used as a component part of a flexible or rigid tube coupling.
What is a Tube Fitting Insert? 10 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Fluid-Emulsion Spray Nozzle? 46 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 10 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 12 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 11 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Quick-Disconnect Nipple? 12 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is an Exhaust-Intake Pneumatic Muffler? 23 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Flange To Flange Straight Adapter? 29 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
Connector,Tubing,Straight 28 Items
What is a Hydraulic Manifold Assembly? 264 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Tube Swivel Joint? 20 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
Adapter,Check Valve 11 Items
Nipple,Special 34 Items
Adapter Assembly,Valve 18 Items
Adapter And Flange Assembly 17 Items
What is a Tube Coupling Assembly? 18 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 65 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Special-Shaped Hose Clamp? 15 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Pipe To Tube Swivel Joint? 21 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Tube Fitting Compression Ferrule? 60 Items: A Tube Fitting Compression Ferrule (FERRULE,COMPRESSION,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be slipped over tubing. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled, the joint seals at the seat in a manner similar to a seat type union.
What is a Pipe Fitting Flared Collar? 39 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 590 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 63 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 53 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Hydraulic Swivel Joint? 54 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 209 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.

Stock Items From Supply Class 4730 Page 76 of 242

4730-99-777-9373
Pipe Reducer

997779373
YJ-24113-A: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-780-3905
Pipe To Tube Straight Adapter

997803905
T4231-P-403: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-254-1272
Non-Metallic Connecting Sleeve

992541272
BAS 160-2-2-12 MM I.D.-8 MM LONG: RNCC: 3 | RNVC: 2
BAS160-2-2-12-8: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-740-2655
Pipe To Tube Straight Adapter

997402655
ND.9126: RNCC: 3 | RNVC: 1
QCA/ND9126: RNCC: 5 | RNVC: 2
J824-712365: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-748-8589
Deck Connector

997488589
1066/CO 915: RNCC: 3 | RNVC: 2
CO 915: RNCC: 5 | RNVC: 1
H926-704339: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-764-0284
Tube Coupling Inverted Nut

997640284
FHQ6044-2: RNCC: 3 | RNVC: 2
FHQ6044-2: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-763-9845
Pipe Coupling

997639845
MC12-8: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-580-9698
Fluid Pressure Line Multiple Connector

995809698
SK8755-4: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-809-5171
Pipe To Tube Straight Adapter

998095171
4FTXS: RNCC: 3 | RNVC: 2
14668: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-808-5604
Pipe Tee

998085604
LBF.BW.0182: RNCC: 3 | RNVC: 2

4 Apr 1996

4730-99-793-2750
Hose Connector

997932750
11499672: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-839-0910
Lubrication Fitting

998390910
5248630: RNCC: 3 | RNVC: 2

12 May 2011

4730-99-832-2183
Pi Straight Adaptor

998322183
41023376: RNCC: 3 | RNVC: 2
K053: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-563-6008
Adaptor

995636008
CK930109: RNCC: 3 | RNVC: 2
AC10750: RNCC: 5 | RNVC: 2

20 May 1997

4730-99-424-3872
Anchor And Reinforcement Pipe Clamp

994243872
F196077: RNCC: 3 | RNVC: 2
F196077: RNCC: 5 | RNVC: 9
26FX2134: RNCC: 6 | RNVC: 9
26FX2134: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-134-6205
Tub Brazing Ferrule

4730-99-134-6219

4730-99-149-4045
Fluid Passage Bolt

991494045
110003-28607: RNCC: 3 | RNVC: 2
110003-28607: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-755-5061
Tube To Boss Straight Adapter

997555061
0019512182: RNCC: 3 | RNVC: 2
0019512182: RNCC: 5 | RNVC: 2

16 Oct 2002

4730-99-756-6002
Pipe To Boss Straight Adapter

997566002
FV 1046240: RNCC: 3 | RNVC: 2
FP982UG0030: RNCC: 6 | RNVC: 9

24 Nov 1998

4730-99-748-2407
Tube Union

997482407
11499097: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-812-4479
Tube Fitting Clinch Sleeve

998124479
R40S: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-405-1794
Tube Seal Bonnet

994051794
AGS1236-CC: RNCC: 2 | RNVC: 2
53-94-1: RNCC: 4 | RNVC: 1
AGS1236CC: RNCC: 5 | RNVC: 2
AGS1236CC: RNCC: 5 | RNVC: 2
28F15536: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-264-5482
Tube To Boss Straight Adapter

992645482
2688W619: RNCC: 3 | RNVC: 2

13 Dec 2002

4730-99-512-1947
Pipe To Boss Straight Adapter

995121947
1620/2060: RNCC: 3 | RNVC: 2

6 Jan 2011

4730-99-814-6537
Tube Tee

998146537
EL08SOMDCF: RNCC: 3 | RNVC: 2

25 Aug 2011

4730-99-250-3669

4730-99-508-4267

4730-99-535-9430
Backplate

995359430
NO PRIMARY REF 99-535-9430: RNCC: 3 | RNVC: 2
YORKSHIRE PIPE BRACK 10MM: RNCC: 5 | RNVC: 2
TT7777846: RNCC: 6 | RNVC: 9

2 Nov 2001

4730-99-662-3893
Pipe To Tube Straight Adapter

996623893
A.G.S. 3013-A: RNCC: 2 | RNVC: 2
A.G.S. 3013 MARK A: RNCC: 5 | RNVC: 2
AIRWORTHY CERTIFICATION ITEM: RNCC: 5 | RNVC: 9
001WK-016: RNCC: 6 | RNVC: 9

29 Sep 2000

4730-99-419-8761
Union Joint Ring

994198761
NO PRIMARY REF 99-419-8761: RNCC: 3 | RNVC: 2
DWS190-7: RNCC: 5 | RNVC: 2
88809-801-413: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-769-5042
Pipe Elbow Adaptor

997695042
1062 WS 610: RNCC: 3 | RNVC: 2
1062WS610: RNCC: 5 | RNVC: 2
H926-238471: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-177-7262
Tube Tee

991777262
EN4182-161216: RNCC: 2 | RNVC: 2

27 Feb 2001

4730-99-783-6187
Pump Drain Tube

997836187
1837-005: RNCC: 3 | RNVC: 2

15 Jun 1990

4730-99-790-4556
Pipe Reducer

997904556
M-L1-57-302ITEM2: RNCC: 3 | RNVC: 2
M-L1-57-302/2: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-554-6538
Tube Fitting Brazing Ferrule

995546538
B7584: RNCC: 3 | RNVC: 2
3B4891SKF: RNCC: 5 | RNVC: 1
B7584SKF: RNCC: 5 | RNVC: 2
2B4891SKF2: RNCC: 5 | RNVC: 2
H606-424643: RNCC: 6 | RNVC: 9
H606-960007: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-775-8359
Pipe To Tube Straight Adapter

997758359
1074/SD.242: RNCC: 3 | RNVC: 2
1074 SD.242: RNCC: 5 | RNVC: 2
H926-282634: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-775-8356
Pipe To Tube Straight Adapter

997758356
1074/SD.241: RNCC: 3 | RNVC: 2
1074 SD.241: RNCC: 5 | RNVC: 2
H926-282631: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-083-3648
Pipe Plug

990833648
9023K013: RNCC: 1 | RNVC: 2
TP1NPT: RNCC: 3 | RNVC: 2

25 Apr 1996

4730-99-532-6574
Pipe Elbow

995326574
SSN07/Y/275/231: RNCC: 3 | RNVC: 2
Y/275/231: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-562-0459
Pipe To Tube Elbow

4730-99-562-0458
Union Nut

4730-99-550-3301
Tube Tee

4730-99-556-5726

4730-99-552-8988

4730-99-075-5308
Gauge Adaptor

4730-99-554-2902
Pipe Straight Adapter

4730-99-332-1051
Tube Tee

993321051
TEK108: RNCC: 3 | RNVC: 2

4 Apr 2000

4730-99-383-3799
Pipe Tee Adaptor

993833799
K17829: RNCC: 3 | RNVC: 2

14 Jun 1991

4730-99-016-1033
Fluid Passage Bolt

990161033
CV20524: RNCC: 3 | RNVC: 2

19 Dec 1994

4730-99-101-6353
Pi Straight Adapter

991016353
RU15453: RNCC: 3 | RNVC: 2
RU15453: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-229-7957
Conn Rib 11 Transfe

992297957
M2825058100000: RNCC: 3 | RNVC: 2

11 Apr 2013

4730-99-534-5240
Fluid Fl Restrictor

4730-99-540-8868
Multiple Connector

4730-99-700-5271
Panel Moun Coupling

4730-99-532-0304

4730-99-239-2430
Quick Disconnect Coupling Half

992392430
SY104030/ITEM 3.07.11: RNCC: 3 | RNVC: 2
SY104030/3.07.11: RNCC: 5 | RNVC: 2

2 Apr 2008

4730-99-791-3183
Filter And Spring A

997913183
UX60309A: RNCC: 3 | RNVC: 2
001308841: RNCC: 5 | RNVC: 1
UX60309A/ATOM: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-942-6204
Flange To Hose Straight Adapter

999426204
SSML7-30 PART 1: RNCC: 4 | RNVC: 1

25 Apr 1991

4730-99-435-1297
Pipefitting Flared Insert

994351297
AGS1142: RNCC: 4 | RNVC: 1
RSL760-1: RNCC: 5 | RNVC: 2
36NG2865: RNCC: 6 | RNVC: 9
36NG2865: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-424-6061
Lubrication Fitting Adapter

994246061
F.232125: RNCC: 3 | RNVC: 2
F.232125: RNCC: 5 | RNVC: 9
26FX9978: RNCC: 6 | RNVC: 9
26FX9978: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-838-5485
Tube Reducer

998385485
508464-3: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-833-9264
Pipe Plug

998339264
94-S-1: RNCC: 3 | RNVC: 2
355547X1: RNCC: 5 | RNVC: 2
955214: RNCC: 6 | RNVC: 9
937059: RNCC: 6 | RNVC: 9
LV6MT9CDR94S1: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-970-1667
Union Nut

999701667
AE1M2566298-4: RNCC: 3 | RNVC: 2
M2566298-4: RNCC: 5 | RNVC: 2
M2566298-4: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-763-6169
Pipe To Hose Elbow

997636169
E332-8: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-769-8786
Steam Trap

997698786
TD42L BSP ENP: RNCC: 3 | RNVC: 1
TD42 L: RNCC: 5 | RNVC: 1

20 Jul 1996

4730-99-106-2249
F Coupling Assembly

4730-99-779-7256
Pipe Cap

997797256
NEL404: RNCC: 3 | RNVC: 2

14 Mar 1985

4730-99-798-1448
Sediment Strainer Element

997981448
1630383: RNCC: 3 | RNVC: 2

22 Nov 1993

4730-99-803-0520
Pipe To Tube Straight Adapter

998030520
768256: RNCC: 3 | RNVC: 2
X366: RNCC: 5 | RNVC: 2
LV6MT3TFX366: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-481-9916
Probe Assembly

994819916
05-4110: RNCC: 3 | RNVC: 2

16 Nov 2009

4730-99-216-4159
Hose Clamp

992164159
SUB3011444: RNCC: 3 | RNVC: 2
291-593: RNCC: 5 | RNVC: 1

9 Dec 2013

4730-99-123-6141
Fluid Passage Bolt

991236141
AS2209: RNCC: 3 | RNVC: 2
AS2209: RNCC: 3 | RNVC: 2
26DH1540: RNCC: 6 | RNVC: 9
26FZ12065: RNCC: 6 | RNVC: 9
26FK1042: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-223-1897

4730-99-396-0901
Pipe Nipple

4730-99-224-3468

4730-99-302-9052

4730-99-528-6212
Pipe Expansion Joint

995286212
NES345: RNCC: 4 | RNVC: 1
001,004,650: RNCC: 5 | RNVC: 1
6395: RNCC: 5 | RNVC: 1
RB3/9500/7: RNCC: 5 | RNVC: 2
DGS 1055: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-721-2811
Pipe To Tube Elbow

997212811
SSN.07/W/523/60/6/7: RNCC: 3 | RNVC: 2
W/523/60/6/7: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-896-7089
Pipe Coupling

998967089
ALSI-133.0-16E85: RNCC: 3 | RNVC: 2

9 Feb 2005

4730-99-761-2933
Tube Nipple

997612933
4WTX-S: RNCC: 3 | RNVC: 2
AS30197: RNCC: 5 | RNVC: 2
4WTXS: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-777-0663
Branch Piece

997770663
1074/D188: RNCC: 3 | RNVC: 2
D188: RNCC: 5 | RNVC: 1
H926-301240: RNCC: 6 | RNVC: 9
926-301240: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-325-2228
Pipe To Hose Wye Adaptor

993252228
UP71049: RNCC: 3 | RNVC: 2

16 Dec 1991

4730-99-813-5984
Pipe To Tube Straight Adapter

998135984
7068-11: RNCC: 3 | RNVC: 2
SP23-71: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-214-6938
Pipe Reducer

992146938
6MTWA4TSW316: RNCC: 3 | RNVC: 2
GEN2-607: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-075-5783
Restrictor Subassem

990755783
NE.46749: RNCC: 3 | RNVC: 2

13 Apr 1994

4730-99-148-9550
Pipe Coupling

991489550
FRS1230M7: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-207-2384
Pipe To Tube Straight Adapter

992072384
S576B: RNCC: 3 | RNVC: 2
GME743871TEM82: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-776-8261
Tube Coupling

4730-99-771-7985
Pipe Tee

4730-99-774-4942
Tube Nipple

4730-99-773-2708

4730-99-810-1884

4730-99-563-0397

4730-99-554-0769
Sediment Strainer

4730-99-465-3239

4730-99-779-6672
Pipe Reducer

4730-99-801-1813
Pipe Tee

998011813
AGS1119: RNCC: 4 | RNVC: 1
B46602: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-808-1949
Pipe Bushing

998081949
MEXE20266: RNCC: 3 | RNVC: 2
19F11R: RNCC: 5 | RNVC: 2
19F11R: RNCC: 5 | RNVC: 9
MEXE20266: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-558-9851
Fluid Pressure Line Multiple Connector

995589851
CP2338: RNCC: 3 | RNVC: 2
RUB5463: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-408-4065
Olive Union

994084065
01B: RNCC: 3 | RNVC: 2
16B3386: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-607-3195
Fluid Flow Restrictor Unit

996073195
AX54427A: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-142-4333
Banjo

4730-99-977-3374
Union Nut

999773374
AS43021-15: RNCC: 2 | RNVC: 2
EAG5591-1-15: RNCC: 3 | RNVC: 2
PAN4011-15: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-520-8062
Union Nut

995208062
NO PRIMARY REF 99-520-8062: RNCC: 3 | RNVC: 2
A604667-1: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-301-6824
Tube To Boss Straight Adapter

993016824
SSN.07/W/158/43: RNCC: 3 | RNVC: 2
SSN.07/W/158: RNCC: 5 | RNVC: 1
001144904: RNCC: 5 | RNVC: 1
W/158 FITTING FC 43: RNCC: 5 | RNVC: 1
W/158/FC 43: RNCC: 5 | RNVC: 1
SSN.07/W/158/FC 43: RNCC: 5 | RNVC: 2
001144903/FC 43: RNCC: 5 | RNVC: 2
SSN.07/W/158 FITTING FC 43: RNCC: 5 | RNVC: 2

8 Jun 1996

4730-99-528-6193
Pipe Expansion Joint

995286193
CE-15968: RNCC: 3 | RNVC: 2
SE/299/SS/001/1: RNCC: 5 | RNVC: 2
H119-528-6193: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-602-7631
Pipe Coupling

996027631
NO PRIMARY REF 99-602-7631: RNCC: 3 | RNVC: 2
4M 2 IN.: RNCC: 5 | RNVC: 2
4M 2": RNCC: 5 | RNVC: 2

25 Jan 2010

4730-99-834-7381
Pipe Tee

998347381
ZMFMB08: RNCC: 3 | RNVC: 2
ND9406: RNCC: 5 | RNVC: 2

8 Mar 2007

4730-99-670-6150
Pipe To Tube Straight Adapter

996706150
100355-9000-138: RNCC: 1 | RNVC: 2
2/3NMSC: RNCC: 3 | RNVC: 2
100355-9000-138: RNCC: 5 | RNVC: 2
100355-9000-138: RNCC: 5 | RNVC: 9

12 Jun 1992

4730-99-544-4342
Stop End

995444342
61MHD: RNCC: 3 | RNVC: 1

25 Apr 1991

4730-99-544-2502
Sediment Strainer Body

995442502
448060102: RNCC: 3 | RNVC: 1

25 Apr 1991

4730-99-216-1023
Fluid Pressure Line Multiple Connector

992161023
HGA1: RNCC: 3 | RNVC: 2

18 Jun 2012

4730-99-137-2855
Compensating Tube

991372855
1474W018: RNCC: 3 | RNVC: 2
HPLS 5312: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-332-4087
Pipe Tee

993324087
13933860: RNCC: 3 | RNVC: 2
CV186219: RNCC: 5 | RNVC: 2
VOE13933860: RNCC: 5 | RNVC: 2

24 Jun 2011

4730-99-202-2620
Fluid Passage Bolt

992022620
J24382B: RNCC: 3 | RNVC: 2
257947: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-463-9133
Union

994639133
M4715006900100: RNCC: 3 | RNVC: 2

10 Nov 2011

4730-99-714-4104
Pipe Coupling

997144104
2855: RNCC: 3 | RNVC: 2
Y100 717 01: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-179-5494
Tube To Hose Straight Adapter

991795494
332/N3040: RNCC: 3 | RNVC: 2
332/N3040: RNCC: 5 | RNVC: 2

17 May 2011

4730-99-520-9033
Pipe To Tube Straight Adapter

995209033
UL16605: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-152-1431
Pipe To Hose Straight Adapter

991521431
816/90901: RNCC: 3 | RNVC: 2

18 May 2011

4730-99-213-7974
Tube Tee

992137974
79901581: RNCC: 3 | RNVC: 2
FT551419: RNCC: 5 | RNVC: 2
2500602238: RNCC: 5 | RNVC: 2

16 Sep 2011

4730-99-527-8565
Pipe Stop End

995278565
61HD11N: RNCC: 3 | RNVC: 2
476179A4: RNCC: 5 | RNVC: 2
3962BK4: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-614-8200
Pi Straight Adapter

996148200
CH41135: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-453-1200

4730-99-700-2477
Adapter Bushing

997002477
FV 2062902: RNCC: 3 | RNVC: 2
FV 2062902: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-519-5835

4730-99-693-0816
Sediment Strainer Element

996930816
KNJ1847: RNCC: 3 | RNVC: 2

16 Feb 2006

4730-99-967-1236
Quick Disconnect Coupling Half

999671236
FV1039233: RNCC: 3 | RNVC: 2
1-HP-006-2-WR010-13-2: RNCC: 5 | RNVC: 2
QK0020131: RNCC: 6 | RNVC: 9

9 May 1984

4730-99-647-7371
Pipe To Tube Straight Adapter

996477371
ATL051712-02: RNCC: 3 | RNVC: 2
A-TL-051712-02: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-521-4070
Pipe Reducer

995214070
UU16-8: RNCC: 3 | RNVC: 2
100019-9000-009: RNCC: 5 | RNVC: 2
85-25-10-5-1711: RNCC: 5 | RNVC: 2
529-443550: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-540-9685
Pipe To Tube Straight Adapter

995409685
AM38-24MSCR: RNCC: 3 | RNVC: 2
25-8/8-052: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-139-1612
Pipe Elbow

991391612
AGS1168-B: RNCC: 2 | RNVC: 2
B02249: RNCC: 5 | RNVC: 2
AGS1168B: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-744-0565
Reducing Bush

997440565
RB8/4: RNCC: 3 | RNVC: 1
99-413-5511: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-554-6493
Pipe Tee

995546493
32520-1: RNCC: 3 | RNVC: 2
32-520-1: RNCC: 5 | RNVC: 2
H606-266873: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-966-7671
Hose Clamp

999667671
40-60/13-C7-W2: RNCC: 3 | RNVC: 2
40-60/13-7-2: RNCC: 5 | RNVC: 2
AS50076-13: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-826-8529
Pipe To Hose Straight Adapter

998268529
FV 939167: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-551-3731
Tube To Boss Straight Adapter

995513731
10M22F80MXSV: RNCC: 3 | RNVC: 2
MZK4556: RNCC: 5 | RNVC: 2

12 Apr 2006

4730-99-925-0845
Pipe Union

999250845
AN83218: RNCC: 3 | RNVC: 2

17 Dec 2009

4730-99-932-7073
Pipe Nipple

999327073
FV 2065446: RNCC: 3 | RNVC: 2
FV 2065446: RNCC: 5 | RNVC: 2

25 Apr 2002

4730-99-828-7423
Fluid Pressure Line Multiple Connector

998287423
FV769976: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-823-6767
Fluid Pressure Line Multiple Connector

998236767
FV 736782: RNCC: 3 | RNVC: 2
FV 736782: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-828-0677
Pipe To Boss Straight Adapter

998280677
FV 871585: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-560-7558
Pipe Tee

995607558
8344 AND F500: RNCC: 3 | RNVC: 2
ST046783: RNCC: 5 | RNVC: 2
046783: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-123-7482
Fluid Passage Bolt

991237482
EA3-40-177: RNCC: 3 | RNVC: 2
26FZ6931: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-660-3453
Hose Plug

996603453
NJT602: RNCC: 3 | RNVC: 2

17 Jul 1992

4730-99-828-4616

4730-99-382-7515
Connector

993827515
M2805004020000: RNCC: 3 | RNVC: 2

12 Jun 2012

4730-99-828-4810

4730-99-828-0448

4730-99-152-7592
Boss Pipe

991527592
SE60B: RNCC: 3 | RNVC: 2
79411606: RNCC: 5 | RNVC: 2
2500601393: RNCC: 5 | RNVC: 2

24 Nov 2011

4730-99-200-4445
Tube Nipple

992004445
0201048: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-722-9074
Fluid Passage Bolt

4730-99-761-3887
Brazing Ring

4730-99-796-3469
Pipe Straight Adapter

4730-99-796-3462
Pipe Reducer

4730-99-796-3459
Pipe Straight Adapter

4730-99-743-4839

4730-99-769-6919

4730-99-796-1749
Pipe Straight Adapter

4730-99-741-7362
Hose Clamp

4730-99-744-0065

4730-99-838-0508

4730-99-758-9222
Pipe Reducer

4730-99-428-3701
Pipe Straight Adapter

4730-99-960-5450

4730-99-761-0295

4730-99-789-8757

4730-99-528-1747
Pipe Elbow Adaptor

4730-99-406-3193

4730-99-198-4537
Pipe To Tube Elbow

4730-99-052-0124
Tube Elbow

990520124
3766E004: RNCC: 3 | RNVC: 2
02/200502: RNCC: 5 | RNVC: 2
FL9637A0002: RNCC: 6 | RNVC: 9

31 May 1996

4730-99-260-8731
Pipe To Tube Union

992608731
599/93: RNCC: 3 | RNVC: 2

13 Jul 2006

4730-99-712-5686
Pipe To Tube Straight Adapter

997125686
AS992: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-410-8106
Lubrication Fitting

994108106
11025816: RNCC: 3 | RNVC: 2
CV182720: RNCC: 5 | RNVC: 2
VOE11025816: RNCC: 5 | RNVC: 2

9 Jun 2011

4730-99-436-8973
Pipe Cap

994368973
BS1740: RNCC: 4 | RNVC: 9
KN2472: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-640-5464
Tube Reducer

996405464
3527 429: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-500-2696
Adaptor

995002696
A06BM06BF: RNCC: 3 | RNVC: 2

9 May 1995

4730-99-420-2351
Pipe To Tube Straight Adapter

994202351
ADA127518: RNCC: 3 | RNVC: 2
4F5901: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-204-5734
Fluid Pressure Line Multiple Connector

992045734
WEB113922: RNCC: 3 | RNVC: 2
PA571621: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-424-3893
Anchor And Reinforcement Pipe Clamp

994243893
F201343: RNCC: 3 | RNVC: 2
F201343: RNCC: 3 | RNVC: 9
26FX5163: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-135-8597
Tu Straight Adapter

4730-99-779-9791
Coupling Sleeve

997799791
MF/122/CN/001/1: RNCC: 3 | RNVC: 1
004-465-559: RNCC: 5 | RNVC: 1
MF/00122/CN/001/01: RNCC: 5 | RNVC: 1
004465559: RNCC: 5 | RNVC: 1
MF/00122/CN/001/1: RNCC: 5 | RNVC: 1
MF00122CN00101: RNCC: 5 | RNVC: 1
QCA/MF00122CN00101: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-745-9389
Tube Reducer

997459389
T7192-P-407: RNCC: 3 | RNVC: 2
T7192P407: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-113-5384
Tube Reducer

991135384
KU10903: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-663-3179
Union Nut

996633179
Y3JS 43725: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-203-3027
Pi Straight Adapter

992033027
13106: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-453-6819
Fluid Pressure Line Multiple Connector

994536819
VU17450: RNCC: 3 | RNVC: 2
36AD2987: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-420-3022
Hose Coupling

994203022
CHC65: RNCC: 3 | RNVC: 1

25 Apr 1991

4730-99-603-6016
Anchor And Reinforcement Pipe Clamp

996036016
F274478: RNCC: 3 | RNVC: 2
F274478: RNCC: 3 | RNVC: 9

25 Apr 1991

4730-99-225-7387
Torque Adaptor

992257387
2002T000: RNCC: 3 | RNVC: 2
0129U0006: RNCC: 6 | RNVC: 9

4 Sep 2001

4730-99-617-3125
Sediment Strainer Element

996173125
A22305037: RNCC: 3 | RNVC: 2
A22305037A: RNCC: 5 | RNVC: 2
A2235037: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-199-8242
Pipe Straight Adapter

4730-99-970-4913

4730-99-925-3021
Bimetal Therm

4730-99-930-0502
Pipe Straight Adapter

4730-99-448-2062

4730-99-967-8282
Pipe Plug

4730-99-930-7397
Tee

4730-99-441-7999

4730-99-930-0248

4730-99-924-5234
Hose Coupling

4730-99-625-9309
Pipe Straight Adapter

4730-99-227-8290
Self-Sealing Coupling Half

992278290
33C100469: RNCC: 3 | RNVC: 2
BC100468: RNCC: 5 | RNVC: 1
C100469: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-748-7993
Tube Tee

997487993
MF/00323/CN/034: RNCC: 3 | RNVC: 2
004463510: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-559-5734
Pipe True Wye

995595734
D50Y12-12-12: RNCC: 3 | RNVC: 2
J477-029329: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-332-3918
Pipe Flange

993323918
11B25-26: RNCC: 3 | RNVC: 2
921-323918: RNCC: 6 | RNVC: 9
41ZZ1358: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-559-5819
Pipe To Tube Straight Adapter

995595819
D43-24-161: RNCC: 3 | RNVC: 1
J477-029189: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-136-9539
Hose Elbow

991369539
19-6864-4: RNCC: 3 | RNVC: 2
31N20017: RNCC: 6 | RNVC: 9

18 Jan 1977

4730-99-149-8879
Hydraulic System Accessories Manifold

991498879
G406/8114: RNCC: 3 | RNVC: 2
A010-13A-J03: RNCC: 6 | RNVC: 9

14 Jul 2004

4730-99-977-2919
Tube Reducer

999772919
AS43191-1512: RNCC: 2 | RNVC: 2

25 Apr 1991

4730-99-826-4006
Pipe To Tube Straight Adapter

998264006
EMERTKDVEH1213CHAP4FIG17: RNCC: 3 | RNVC: 2
EMERTKDVEH1203CHAP4F1G16: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-528-4478
Union Nut

995284478
Q.J.2033: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-789-7703
Pipe To Tube Straight Adapter

997897703
56560001: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-539-9733
Pipe To Hose Elbow

995399733
F6699-8: RNCC: 3 | RNVC: 2
6699-8: RNCC: 5 | RNVC: 2
F6699-8: RNCC: 5 | RNVC: 2
6699-8: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-664-8789
Pipe Flange

996648789
111245-541: RNCC: 3 | RNVC: 2
111245-541: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-825-4210

4730-99-780-3024
Pipe Wye Adaptor

4730-99-823-6115
Pipe Tee

4730-99-529-8160
Sediment Strainer Element

995298160
UX.8390.: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-901-7482

4730-99-901-9558

4730-99-304-1930
Flexible Coupling

993041930
5598C000: RNCC: 3 | RNVC: 2
5598CINST: RNCC: 5 | RNVC: 2

26 Nov 1997

4730-99-797-6849
Pipe To Hose Elbow

997976849
SA26079: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-795-0663
Pipe Plug

997950663
3071537: RNCC: 3 | RNVC: 2
3071537: RNCC: 5 | RNVC: 2

9 Dec 1993

4730-99-817-9182
Tube Nipple

998179182
A10CR: RNCC: 3 | RNVC: 2
ST10: RNCC: 5 | RNVC: 2
190-357496: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-604-0238
Fluid Passage Bolt

996040238
F283109: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-470-0571
Fluid Pressure Line Multiple Connector

994700571
100093917: RNCC: 3 | RNVC: 2
27Q28242: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-958-6536
Union

999586536
M4715005500100: RNCC: 3 | RNVC: 2

10 Nov 2011

4730-99-437-8876
Pipe Reducer

4730-99-250-1721
Bush

992501721
NO PRIMARY REF 99-250-1721: RNCC: 3 | RNVC: 2
G1Z2218E00: RNCC: 5 | RNVC: 2

2 May 2006

4730-99-790-6700
Pipe Plug

997906700
100401-9000-621: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-146-7538
Tube Tee

991467538
WD01-80-95279: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-248-5196
Pipe Coupling

992485196
NO PRIMARY REF 99-248-5196: RNCC: 3 | RNVC: 2
ITEM 86: RNCC: 5 | RNVC: 2
ITEM 86: RNCC: 5 | RNVC: 9

19 May 2011

4730-99-142-7782
Pipe Nipple

991427782
D400-32-32: RNCC: 3 | RNVC: 1
44468-153-0: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-530-3953
Pipe Expansion Joint

995303953
AEJ 0023: RNCC: 3 | RNVC: 2
SSN02-201-401-12-9: RNCC: 5 | RNVC: 2
94I027EJQ: RNCC: 5 | RNVC: 2
VR15508: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-985-0815
Pipe Nipple

999850815
11013802: RNCC: 3 | RNVC: 2
2500600841: RNCC: 5 | RNVC: 2

14 Jun 2011

4730-99-713-2615
Tube-Hose Fitting Compression Sleeve

997132615
MR9227CJ: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-254-7889
Pipe Locknut

992547889
12018908: RNCC: 3 | RNVC: 2
2500600000: RNCC: 5 | RNVC: 2

27 Jun 2011

4730-99-635-3688
Pipe To Tube Straight Adapter

996353688
824909: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-369-1142
Locating Sleeve

993691142
JR31402: RNCC: 3 | RNVC: 2

13 Oct 1999

4730-99-710-1237
Pipe To Tube Straight Adapter

997101237
3USL40: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-951-2233
Pipe To Tube Elbow

999512233
65BS: RNCC: 3 | RNVC: 1
5364116SH26ITEM9: RNCC: 5 | RNVC: 2
S314179: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-948-8260
Union Nut

999488260
AGS711: RNCC: 4 | RNVC: 1
28F3631: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-952-0636
Sediment Strainer Element

999520636
200413: RNCC: 3 | RNVC: 2
X0200413: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-448-5855
Conn Rib 15 Obfeed

994485855
M2825036720000: RNCC: 3 | RNVC: 2

11 May 2013

4730-99-177-7274
Pipe Tee

991777274
AM6TR: RNCC: 3 | RNVC: 2

5 Jul 2001

4730-99-663-4146
Pipe Elbow

996634146
BN040448: RNCC: 3 | RNVC: 2
ND26368K: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-974-5216
Pipe To Tube Straight Adapter

999745216
FV 799517: RNCC: 3 | RNVC: 2
CV5880: RNCC: 5 | RNVC: 2

4 Dec 1991

4730-99-147-9762
Pipe Reducer

991479762
ND40558: RNCC: 3 | RNVC: 2

23 Jan 2007

4730-99-409-3981
Adaptor Bushing

994093981
FT860: RNCC: 3 | RNVC: 2
61SY40285: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-184-6059
Quick Disconnect Coupling Half

991846059
45/909800: RNCC: 3 | RNVC: 2

23 Jan 2006

4730-99-371-2329
Tube Swivel Joint

993712329
601326: RNCC: 3 | RNVC: 2

1 May 2012

4730-99-375-3587
Pipe Flange

993753587
12Y3J41648: RNCC: 3 | RNVC: 2

13 May 1997

4730-99-198-0707
Fluid Pressure Line Multiple Connector

991980707
34341-401: RNCC: 3 | RNVC: 2
A499: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-663-9971
Pipe Elbow

996639971
BW202707: RNCC: 3 | RNVC: 2
202708: RNCC: 6 | RNVC: 9
FL9802Z0013: RNCC: 6 | RNVC: 9

18 Jun 1998

4730-99-205-9713
Pipe Straight Adapter

4730-99-206-0519

4730-99-930-0119

4730-99-206-0565
Pipe Straight Adapter

4730-99-930-0148

4730-99-930-2393

4730-99-967-8291
Pipe Straight Adapter

4730-99-449-3022

4730-99-924-4643
Packing Nut

4730-99-930-0094

4730-99-207-2531

4730-99-203-3443
Pipe To Tube Straight Adapter

992033443
GMA52511: RNCC: 3 | RNVC: 2
1527033: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-544-4925
Pipe Tee

995444925
S0CKETWELDTEE: RNCC: 3 | RNVC: 9

25 Apr 1991

4730-99-227-2271
Sediment Strainer Body

992272271
WF1: RNCC: 3 | RNVC: 2

12 Jul 2000

4730-99-532-6086
Multiple Connector

995326086
BDC8832: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-759-0739
Union Nut

997590739
125/M4: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-798-0457
Blank Flange

997980457
MF01216AZ006: RNCC: 3 | RNVC: 2
004464842/01: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-254-4506
Self-Sealing Coupling Assembly

992544506
697/7/01507/000: RNCC: 3 | RNVC: 1
HTE772-19-K: RNCC: 5 | RNVC: 1
M005A0371-00: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-404-8162
Fluid Flow Restrictor

994048162
2485W014: RNCC: 3 | RNVC: 2

18 May 1993

4730-99-663-2967
Pipe To Tube Elbow

996632967
9017K015: RNCC: 3 | RNVC: 2
4MSEL2: RNCC: 6 | RNVC: 9

25 Apr 1996

4730-99-606-5830
Sediment Strainer Element

996065830
B407097: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-338-4790
Hose Clamp

993384790
AC-20C47/3: RNCC: 3 | RNVC: 2
BS5315-NO.25: RNCC: 6 | RNVC: 9
WE128B: RNCC: 6 | RNVC: 9

9 Jul 1998

4730-99-668-2063
Flange To Flange Straight Adapter

996682063
OSH 48296-02-10: RNCC: 3 | RNVC: 2

15 Nov 2011

4730-99-256-5012
Pipe Expansion Joint

992565012
UDC,0040,208882: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-573-1250
Hose Clip

995731250
PHS50449: RNCC: 3 | RNVC: 2

28 Nov 1991

4730-99-549-3291
Pipe Coupling

995493291
04020-4: RNCC: 3 | RNVC: 2

1 Aug 1991

4730-99-227-6288
Water Outlet Closin

992276288
SR0593/9: RNCC: 3 | RNVC: 2
232A-17: RNCC: 6 | RNVC: 9
1279-88/2: RNCC: 6 | RNVC: 9

23 Jul 1997

4730-99-328-8335
Pipe To Hose Straight Adapter

993288335
AB/01/11/02010: RNCC: 3 | RNVC: 2
MM7615: RNCC: 5 | RNVC: 2
AB/1/11/2010: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-533-7529
Pipe Flange

995337529
001248878: RNCC: 3 | RNVC: 2
BR3013-2-PT1AND2: RNCC: 4 | RNVC: 1

25 Apr 1991

4730-99-634-8898
Hose Clamp

996348898
BAS242-4: RNCC: 3 | RNVC: 2
26VC23489: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-441-1184
Pipe To Hose Straight Adapter

994411184
NO PRIMARY REF 99-441-1184: RNCC: 3 | RNVC: 2
5571-181A/122: RNCC: 5 | RNVC: 2
AH-118294: RNCC: 5 | RNVC: 2
3-80405: RNCC: 5 | RNVC: 2

6 Aug 2013

4730-99-748-5334
Pipe To Tube Straight Adapter

997485334
MC4-6: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-556-7993

4730-99-550-1195

4730-99-514-5251
Tube To Boss Elbow

995145251
BM44529: RNCC: 3 | RNVC: 2

29 Sep 1999

4730-99-770-8367
Pipe To Tube Straight Adapter

997708367
JRA5565: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-198-3086

4730-99-453-7105
Fluid Passage Bolt

994537105
B288133: RNCC: 3 | RNVC: 2
36AD3589: RNCC: 6 | RNVC: 9

25 Jul 1979

4730-99-618-4919

4730-99-627-7209

4730-99-770-4009
Sediment Strainer

997704009
4954855: RNCC: 3 | RNVC: 2
4954855: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-792-5471
Hose Clamp

997925471
BAS243-M5: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-786-1898
Sediment Strainer Element

997861898
FV 2023692: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-463-9129
Union

994639129
M4715006800100: RNCC: 3 | RNVC: 2

10 Nov 2011

4730-99-947-0601

4730-99-544-3990
Sediment Strainer Body

995443990
401150122: RNCC: 3 | RNVC: 1

25 Apr 1991

4730-99-461-9754
Bonde Body Assembly

994619754
C16135B: RNCC: 3 | RNVC: 2
C16135B: RNCC: 5 | RNVC: 2
27ZA97: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-739-2440

4730-99-544-1800
Sediment Strainer

995441800
255: RNCC: 3 | RNVC: 1
001004414-01: RNCC: 5 | RNVC: 1
8750: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-208-6023
Pipe To Tube Straight Adapter

992086023
36 0504 10: RNCC: 3 | RNVC: 2
ST49438: RNCC: 5 | RNVC: 2
A18835: RNCC: 5 | RNVC: 2
4F9202: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-775-6298
Pipe To Tube Straight Adapter

997756298
5005209: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-031-6940
Union Nut

990316940
154/272/43: RNCC: 3 | RNVC: 1

25 Apr 1991

4730-99-424-3922
Tee Cone Coupling

994243922
A210073: RNCC: 3 | RNVC: 2
26FX8318: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-767-8501
Pipe To Tube Straight Adapter

997678501
ALIJ-CSL SHEET 684: RNCC: 3 | RNVC: 9

25 Apr 1991

4730-99-728-1184
Spares Kit

997281184
C100681: RNCC: 3 | RNVC: 2
33C100681: RNCC: 5 | RNVC: 2
45/901901: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-982-0136
Fluid Flow Restrictor

999820136
EB2820B001-113: RNCC: 3 | RNVC: 2

22 Aug 2002

4730-99-977-3370
Lon Blanking Nipple

999773370
AS43068-28: RNCC: 2 | RNVC: 2

25 Apr 1991

4730-99-192-9259
Fluid Pressure Line Multiple Connector

991929259
B21-32-1523: RNCC: 3 | RNVC: 2
B21-32-1523: RNCC: 3 | RNVC: 9

25 Apr 1991

4730-99-126-0970
Union Nut

991260970
EVG104777: RNCC: 3 | RNVC: 2

22 Mar 1995

4730-99-225-8336
Fluid Passage Bolt

992258336
201593670: RNCC: 3 | RNVC: 2

10 Apr 2003

4730-99-442-0542
Pipe To Tube Straight Adapter

994420542
GMA1607: RNCC: 3 | RNVC: 2
4G5695: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-942-9873
Pipe Plug

999429873
FW1178U: RNCC: 3 | RNVC: 2
FW1178U: RNCC: 5 | RNVC: 9
42QR638: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-558-2085
Clamp Ring

995582085
X0050EB00022: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-608-3567
Tube Coupling

996083567
PCM6B: RNCC: 3 | RNVC: 2
WE128B: RNCC: 6 | RNVC: 9

19 Sep 1997

4730-99-557-9589
Pipe Reducer

995579589
2045470: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-225-7128
Pipe To Tube Straight Adapter

992257128
800002370: RNCC: 3 | RNVC: 2

28 Mar 2001

4730-99-365-5440
Tie Rod

993655440
M2805012120200: RNCC: 3 | RNVC: 2

11 Apr 2013

4730-99-498-9427
Pipe Tee

994989427
12012309: RNCC: 3 | RNVC: 2
2500600031: RNCC: 5 | RNVC: 2

27 Jun 2011

4730-99-319-0757
Pipe Nipple

993190757
ST10873X298: RNCC: 3 | RNVC: 2
CV174485: RNCC: 5 | RNVC: 2

17 Jan 2012

4730-99-958-1353
Pipe Expansion Joint

999581353
MCD 8524: RNCC: 3 | RNVC: 2
2-0000-3-0/8524: RNCC: 5 | RNVC: 2
14941432: RNCC: 5 | RNVC: 2

24 Mar 2006

4730-99-052-5064
Pipe Coupling

990525064
020060280: RNCC: 3 | RNVC: 2
020060280 SHEET 001: RNCC: 5 | RNVC: 2
020060280 SHT 001: RNCC: 5 | RNVC: 2
020060280/001: RNCC: 5 | RNVC: 2

28 Jan 1997

4730-99-801-1243
Lubrication Fitting

998011243
BS1486 PART 1-15: RNCC: 2 | RNVC: 2
BS1486PT1-15: RNCC: 5 | RNVC: 2
BS1486PT1: RNCC: 6 | RNVC: 9
15: RNCC: 6 | RNVC: 9
DEFSTAN47-7: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-781-2616
Pipe To Tube Straight Adapter

997812616
W2-95-1-00: RNCC: 3 | RNVC: 2
CP4/9049039: RNCC: 5 | RNVC: 2
1069/904801: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-825-9433
Pipe Coupling

998259433
NO PRIMARY REF 99-825-9433: RNCC: 3 | RNVC: 2
FL148-1: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-348-2259
Pipe To Boss Straight Adapter

993482259
1620/2068: RNCC: 3 | RNVC: 2

9 Dec 2010

4730-99-775-8348
Tube Elbow

997758348
1074 HPA 90(J): RNCC: 3 | RNVC: 2
1074/HPA/90(J): RNCC: 5 | RNVC: 2
H926-282560: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-758-3557

4730-99-825-4729

4730-99-757-3319
Pipe Straight Adapter

4730-99-838-9337

4730-99-761-6872
Fluid Fl Restrictor

4730-99-761-6853
Pipe Straight Adapter

4730-99-761-6842
Union Tailpiece

4730-99-167-6357
Straight Connector

991676357
PM0406E: RNCC: 3 | RNVC: 2

11 Apr 2005

4730-99-534-4342
Sediment Strainer Element

995344342
099030116: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-835-0980
Pipe To Tube Straight Adapter

998350980
503019: RNCC: 3 | RNVC: 2
503019: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-523-0801
Pipe Cross Adaptor

995230801
A20TRB12UN: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-617-0779
Adaptor Straight Tu

4730-99-545-1918
Ureteral Ca Adaptor

4730-99-545-2272
Pipe Straight Adapter

4730-99-718-8461
Quick Disconnect Coupling Assembly

997188461
HTE714-47J: RNCC: 3 | RNVC: 2

12 Feb 1980

4730-99-950-7643
Fluid Passage Bolt

999507643
A13343: RNCC: 3 | RNVC: 2
80-08-81-0417: RNCC: 5 | RNVC: 2
710-047308: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-348-0322
Pipe Tee

993480322
110087-469: RNCC: 3 | RNVC: 2
26VC-2798: RNCC: 6 | RNVC: 9

20 Mar 2002

4730-99-947-8738
Pipe To Tube Straight Adapter

999478738
80-05-46-3235: RNCC: 3 | RNVC: 2

25 Apr 1991

Load More Results