4730-99-950-3030

4730-99-964-3868 4730999643868 999643868 is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. it has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. the item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a connector, multiple, fluid pressure line, bearing(s), bushing(s), or the like. the item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a fitting, lubrication. excludes bolt, internally relieved body; bleeder valve, hydraulic system; and bushing, machine thread. see also pin, vehicular leaf spring shackle.

3 21 Aug 2004 4730-12-314-7913 Tube Nipple XE8-L/1.451RNCC: 3 | RNVC: 2 | DAC: 3 11 Aug 1988 4730-99-950-3030

3040-19-002-7284 3040190027284 190027284 is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. it is not designed for use in aliging by fitting into corresponding holes of another item. it may be drilled for lubricating holes. for items having an integral gear(s) or worm(s), see gearshaft (as modified). for items not having the above conditions see pin, straight, headless. for items used to transmit motion see shaft, straight. for items having machined ends which constitute steps see axle(1), sholdered. excludes shaft(1), shouldered; and bolt, fluid passage.

3040-19-004-9736 3040190049736 190049736 is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. it must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. the ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. it is not designed for use in aligning by fitting into corresponding holes of another item. for items used to support rotating members see axle(1), shouldered. for items not having any of the above conditions see pin, shoulder, headless. excludes shaft(1), straight; and axle(1), straight.

Apr 1991 2590-99-474-7110 Tran Mounting Plate 40003480RNCC: 3 | RNVC: 2 | DAC: 2 5 May 2011 4730-99-950-3030