What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Pipe Bend?

A Return Pipe Bend (BEND,PIPE,RETURN) is a fitting designed to join a pipe in a parallel position to another pipe for reversing the flow of gas, steam, air, or liquids. Excludes BEND, SOIL PIPE.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Soil Pipe Reducer?

A Soil Pipe Reducer (REDUCER,SOIL PIPE) is a straight fitting with the spigot end larger than the hub end. It is used to connect two pieces of soil pipe of different size.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Pipe Lateral?

A Pipe Lateral (LATERAL,PIPE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit pipes and/or pipe fittings to be taken off laterally from the main line. It may have side inlet(s).

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Soil Pipe Lateral?

A Soil Pipe Lateral (LATERAL,SOIL PIPE) is a fitting having one or two branches which are fixed at various angles other than 90 degrees to the run. If item has two branches, they will be located on opposite sides of the run (180 degrees apart) and will be identical. It may have side inlets.

What is a Soil Pipe Tee?

A Soil Pipe Tee (TEE,SOIL PIPE) is a fitting consisting of a run and a branch. The branch may be either curved or straight, but the axis of the end connection intersects the axis of the run at right angles. It may have side inlets.

What is a Tube Coupling Inverted Nut?

A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.

What is a Tube Coupling Nut?

A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.

What is an Union Tailpiece?

An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.

What is an Union Thread Piece?

An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - United Kingdom (UK)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by United Kingdom (UK) - NCB is 99

Page 133 of 242

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by United Kingdom

47	30	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - United Kingdom (UK)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 43 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 608 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 26 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 14 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 16 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
What is a Bulkhead Hose Connector? 44 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 123 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 192 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 30 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Cap? 97 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 18 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 1095 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 322 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 1326 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 970 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 64 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Pipe To Hose Straight Adapter? 986 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 8242 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 197 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Pipe Bushing? 294 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Hose Nipple? 57 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 1594 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 953 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 86 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 586 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Tube Union? 47 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 172 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Pipe Bend? 11 Items: A Return Pipe Bend (BEND,PIPE,RETURN) is a fitting designed to join a pipe in a parallel position to another pipe for reversing the flow of gas, steam, air, or liquids. Excludes BEND, SOIL PIPE.
What is a Return Tube Bend? 18 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 33 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 131 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Soil Pipe Reducer? 28 Items: A Soil Pipe Reducer (REDUCER,SOIL PIPE) is a straight fitting with the spigot end larger than the hub end. It is used to connect two pieces of soil pipe of different size.
What is a Pipe Flange? 1150 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Machine Thread Plug? 108 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Pipe Lateral? 30 Items: A Pipe Lateral (LATERAL,PIPE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit pipes and/or pipe fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Tube Lateral? 16 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 122 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 2442 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 18 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 312 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Tube Tee? 892 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Soil Pipe Lateral? 30 Items: A Soil Pipe Lateral (LATERAL,SOIL PIPE) is a fitting having one or two branches which are fixed at various angles other than 90 degrees to the run. If item has two branches, they will be located on opposite sides of the run (180 degrees apart) and will be identical. It may have side inlets.
What is a Soil Pipe Tee? 10 Items: A Soil Pipe Tee (TEE,SOIL PIPE) is a fitting consisting of a run and a branch. The branch may be either curved or straight, but the axis of the end connection intersects the axis of the run at right angles. It may have side inlets.
What is a Tube Coupling Inverted Nut? 365 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Tube Coupling Nut? 113 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is an Union Tailpiece? 217 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 61 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Pipe Swivel Joint? 56 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 525 Items
What is a Sediment Strainer? 692 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 24 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 54 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 16 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 228 Items
What is a Pipe Repair Clamp? 51 Items: A Pipe Repair Clamp (CLAMP,REPAIR,PIPE) is a one-piece or two-piece metal clamp generally used with gasket(s) and designed to repair longitudinal splits and pit holes and/or to support thin walls in a straight run of pipe. See also CLAMP, LEAK REPAIR, PIPE COUPLING.
What is a Pipe Cap? 247 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 238 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 14 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 1072 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 1811 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 551 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
What is a Hose Reducer? 41 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 2097 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 1319 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Pipe Cross? 115 Items: A Pipe Cross (CROSS,PIPE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is designed to be used as a junction at the intersection of pipe and/or pipe fittings.
What is a Pipe To Tube Cross? 58 Items: A Pipe To Tube Cross (CROSS,PIPE TO TUBE) is a fitting having four branches in the same plane whose axes form right angles. One or more of the connections have standard pipe threads or are unthreaded and designed to accommodate a pipe. The remaining connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It may have side inlet(s).
What is a Tube Cross? 86 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Spool Piece? 28 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Water Closet Bend? 10 Items: A Water Closet Bend (BEND,WATER CLOSET) is a waste line fitting designed for use with a water closet, to provide a means of connecting a water closet bowl to a waste line.
What is a Pipe Locknut? 74 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 21 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Drainage Pipe Lateral? 23 Items: A Drainage Pipe Lateral (LATERAL,DRAINAGE PIPE) is a fitting having one or two branches which are fixed at various angles other than 90 degrees (1.5705 radians) to the run. It is used as a junction at the intersection of a drainage line and is provided with a shoulder(s) at the end(s) of its internal threaded or unthreaded portion, conforming to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It may have side inlet(s).
What is a Hose Clamp? 1782 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is a Fuel Feeder Manifold? 10 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Soil Pipe Plug? 10 Items: A Soil Pipe Plug (PLUG,SOIL PIPE) is a fitting designed to fit into the hub end of soil pipe or a soil pipe fitting for sealing.
What is a Pipe Clamp Coupling? 59 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is an Air Line Manifold? 48 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 17 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 153 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 186 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 570 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 70 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 522 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 24 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 565 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Elbow Assembly? 11 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Fluid Flow Restrictor? 857 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 36 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Self-Sealing Coupling Half? 218 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 11 Items
What is a Drainage Pipe Elbow? 29 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Pipe True Wye? 40 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 20 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 24 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Sediment Strainer Element? 1052 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 1394 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 1435 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1839 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 139 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is an Union Nut? 1395 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Quick Disconnect Coupling Assembly? 63 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 63 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 20 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Magnetic Pipe Plug? 43 Items: A Magnetic Pipe Plug (PLUG,PIPE,MAGNETIC) is a pipe fitting primarily designed for installation in a lubrication or hydraulic system. It has an integral magnet in the body and external pipe threads.
What is a Hose To Boss Straight Adapter? 51 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 242 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 473 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 37 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 13 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Pipe To Boss Elbow? 20 Items: A Pipe To Boss Elbow (ELBOW,PIPE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a pipe or pipe fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like. See also ELBOW, PIPE; and ELBOW, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Boss Elbow? 66 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 44 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Pipe To Boss Tee? 10 Items: A Pipe To Boss Tee (TEE,PIPE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a pipe or pipe fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Tube To Boss Tee? 35 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 59 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Boss Nipple? 29 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Pipe Outlet? 23 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 23 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 26 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Hose Straight Adapter? 110 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 86 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 57 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Flange Elbow? 169 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 11 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 18 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Pipe Elbow? 65 Items: A Flange To Pipe Elbow (ELBOW,FLANGE TO PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 118 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Flange Tee? 38 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Soil Pipe Coupling? 21 Items: A Soil Pipe Coupling (COUPLING,SOIL PIPE) is a straight fitting used to connect two pieces of soil pipe of the same size.
What is a Quick Disconnect Plug? 17 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Suction Strainer? 51 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Coupling Swage Ferrule? 19 Items: A Tube Coupling Swage Ferrule (FERRULE,SWAGE,TUBE COUPLING) is a flanged cylindrical metallic item used with a plain end tube and swaged in place. It is designed to be used as a component part of a flexible or rigid tube coupling.
What is a Tube Fitting Insert? 10 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Fluid-Emulsion Spray Nozzle? 46 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 10 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 12 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 11 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Quick-Disconnect Nipple? 12 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is an Exhaust-Intake Pneumatic Muffler? 23 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Flange To Flange Straight Adapter? 29 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
Connector,Tubing,Straight 28 Items
What is a Hydraulic Manifold Assembly? 264 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Tube Swivel Joint? 20 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
Adapter,Check Valve 11 Items
Nipple,Special 34 Items
Adapter Assembly,Valve 18 Items
Adapter And Flange Assembly 17 Items
What is a Tube Coupling Assembly? 18 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 65 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Special-Shaped Hose Clamp? 15 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Pipe To Tube Swivel Joint? 21 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Tube Fitting Compression Ferrule? 60 Items: A Tube Fitting Compression Ferrule (FERRULE,COMPRESSION,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be slipped over tubing. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled, the joint seals at the seat in a manner similar to a seat type union.
What is a Pipe Fitting Flared Collar? 39 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 590 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 63 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 53 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Hydraulic Swivel Joint? 54 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 209 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.

Stock Items From Supply Class 4730 Page 133 of 242

4730-99-772-7471
Fluid Passage Bolt

4730-99-741-7419
Pipe Elbow Adaptor

4730-99-785-4938

4730-99-606-1944

4730-99-774-1125
Pipe Tee

4730-99-785-3014
Thermal Penetration

4730-99-745-5870

4730-99-711-9474

4730-99-836-0060
Union Nut

998360060
SF21: RNCC: 3 | RNVC: 2
3017B: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-995-9009
Pipe Reducer

999959009
FR201501-S4: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-841-9144
Snap Lo End Fitting

998419144
AHE50966: RNCC: 3 | RNVC: 2
001SF-015: RNCC: 6 | RNVC: 9

31 Aug 2000

4730-99-840-5423
Hose Coupling

998405423
SFCKAUSHL: RNCC: 3 | RNVC: 2

22 Aug 2013

4730-99-840-3617
Clamp

998403617
SFP M200 SS CLAMP: RNCC: 3 | RNVC: 2

19 Feb 1998

4730-99-837-5303
Pipe Nipple

998375303
FV555828: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-839-4820
Conn Rib 15 Obfeed

998394820
M2825061220000: RNCC: 3 | RNVC: 2

11 May 2013

4730-99-836-7928
Pipe Union

998367928
APSA925: RNCC: 3 | RNVC: 2
6MT9CDRAPSA925FV: RNCC: 6 | RNVC: 9

1 Apr 1980

4730-99-836-2489
Union Nut

998362489
GUNF3: RNCC: 3 | RNVC: 2
929742S1: RNCC: 5 | RNVC: 2
579167: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-836-6781
Pipe Bushing

998366781
58131: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-837-5905
Tube Coupling Nut

998375905
CH12254: RNCC: 3 | RNVC: 2

6 Nov 2012

4730-99-916-9777
Hose Clamp

999169777
91145654: RNCC: 3 | RNVC: 2
91145654: RNCC: 5 | RNVC: 2

13 Dec 1993

4730-99-870-2139
Pipe Nipple

998702139
935016: RNCC: 3 | RNVC: 2
CV186704: RNCC: 5 | RNVC: 2
VOE935016: RNCC: 5 | RNVC: 2

21 Jun 2011

4730-99-837-3154
Fitting

998373154
1001061: RNCC: 3 | RNVC: 2

29 Oct 2010

4730-99-837-1140
Tube Elbow

998371140
11631769: RNCC: 3 | RNVC: 2
2500601868: RNCC: 5 | RNVC: 2
20606: RNCC: 5 | RNVC: 9

30 Jun 2011

4730-99-839-9241
Union Nipple

998399241
ST 16730: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-839-8157
Blind Pipe Adaptor

998398157
SKM6801: RNCC: 3 | RNVC: 2
FV801077: RNCC: 3 | RNVC: 2
DFM 04065700000: RNCC: 5 | RNVC: 2
CV19911M: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-840-1321
Pipe Flange

998401321
110055-7933: RNCC: 3 | RNVC: 2

13 Jan 1992

4730-99-837-1105
Pipe Elbow

998371105
12010519: RNCC: 3 | RNVC: 2
2500602681: RNCC: 5 | RNVC: 2

15 Jun 2011

4730-99-599-9930
Conn R16 Ibd Transf

995999930
M2825056620100: RNCC: 3 | RNVC: 2

11 Apr 2013

4730-99-663-4118
Drip Cap

996634118
DC.075A: RNCC: 3 | RNVC: 2
03823587: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-024-6599
Quick Disconnect Coupling Half

990246599
121: RNCC: 3 | RNVC: 2
9712-15/24: RNCC: 5 | RNVC: 2
486 21 60-00: RNCC: 5 | RNVC: 2
174-808-0021: RNCC: 5 | RNVC: 2
486 21 60-00: RNCC: 5 | RNVC: 2
9712-15 FIGURE 24: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-789-6594
Tube To Boss Elbow

997896594
70-80-443: RNCC: 3 | RNVC: 2
DML040198: RNCC: 5 | RNVC: 2

16 Jul 2007

4730-99-234-2465
Transition Piece

992342465
UX62414: RNCC: 3 | RNVC: 2
UX62414/ATOM: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-461-6156
Connection Pipe

994616156
NO PRIMARY REF 99-461-6156: RNCC: 3 | RNVC: 2
0259-9630: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-977-6674
Pipe Reducer

999776674
EAG5992-11-1410: RNCC: 3 | RNVC: 2
AS43101-1410: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-750-9090
Pipe To Tube Straight Adapter

997509090
1074/AC 1018: RNCC: 3 | RNVC: 2
001113752/CS166: RNCC: 5 | RNVC: 1
AC 1018: RNCC: 5 | RNVC: 1
H926-704456: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-530-1292
Ferrule

995301292
SF/121/AZ/004/002: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-847-5070
Pipe Plug

998475070
343/182: RNCC: 3 | RNVC: 2

16 Mar 2006

4730-99-402-7978
Pipe Flange

994027978
10-9-137: RNCC: 3 | RNVC: 2
X3XCLR10-9-137: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-397-4652
Pipe Nipple

993974652
11012855: RNCC: 3 | RNVC: 2
2500600191: RNCC: 5 | RNVC: 2

15 Jun 2011

4730-99-712-7263
Fluid Passage Bolt

997127263
AC032172: RNCC: 3 | RNVC: 2
27G3508: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-216-1961
Pipe To Tube Swivel Joint

992161961
2BM0412: RNCC: 3 | RNVC: 2

2 Jan 2013

4730-99-423-0922
Union Nut

994230922
GM4938-1: RNCC: 3 | RNVC: 2
4Q2737: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-219-6920
Adapter

992196920
1612/2054: RNCC: 3 | RNVC: 2

14 Sep 2006

4730-99-282-0837

4730-99-102-4572

4730-99-257-8268
Hose Tee

4730-99-907-1682
Hose Coupling

999071682
02/911623: RNCC: 3 | RNVC: 2

1 May 2009

4730-99-887-2292
Nozzle

998872292
50/71523: RNCC: 3 | RNVC: 2
023SA-083: RNCC: 6 | RNVC: 9

17 Dec 2002

4730-99-812-4473

4730-99-802-8825

4730-99-133-1391

4730-99-424-4065
Anchor And Reinforcement Pipe Clamp

994244065
F193856: RNCC: 3 | RNVC: 2
F193856: RNCC: 3 | RNVC: 9
26FX2070: RNCC: 6 | RNVC: 9
26FX2070: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-290-6808
Pipe Elbow

992906808
1000211: RNCC: 3 | RNVC: 2

27 Oct 2010

4730-99-423-2547
Pipe Nipple

994232547
11012907: RNCC: 3 | RNVC: 2
2500600175: RNCC: 5 | RNVC: 2

15 Jun 2011

4730-99-200-5923
Pipe Elbow Adaptor

992005923
37732901: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-730-2465
Pipe To Tube Straight Adapter

997302465
AHO 88062: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-547-5028
Pipe Expansion Joint

995475028
SK4988: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-148-8789
Pipe To Tube Straight Adapter

991488789
1073S076: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-354-0542
Quick Disconnect Coupling Half

993540542
SM 474: RNCC: 3 | RNVC: 2

16 Jan 2006

4730-99-102-8619
Fluid Flow Restrictor

991028619
SJ63478: RNCC: 3 | RNVC: 2
36AD273: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-146-7490
Pipe To Tube Straight Adapter

991467490
WD01-88-01605: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-774-3045
High Pressu Ferrule

997743045
SSN11/W/550/00/5/6: RNCC: 3 | RNVC: 2
W/550/00/5/6: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-745-5884
Pipe Flange

997455884
SSN.08/Y/548/F70/02: RNCC: 3 | RNVC: 2
Y/548/F70/02: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-745-5871
Pipe Tee

997455871
SSN.08/Y/548/277: RNCC: 3 | RNVC: 2
Y/548/277: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-943-9532
Pipe Fitting Flared Collar

999439532
AGS952-D: RNCC: 2 | RNVC: 2
AGS952D: RNCC: 5 | RNVC: 2
B01093: RNCC: 5 | RNVC: 2
001WK-102: RNCC: 6 | RNVC: 9
XW96DL61473: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-944-0886
Fluid Passage Bolt

999440886
AGS1213-G: RNCC: 2 | RNVC: 2
AGS1213G: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-602-1613
Tube Elbow

996021613
LP214-271: RNCC: 1 | RNVC: 2
VSEL-271: RNCC: 3 | RNVC: 2
60107091: RNCC: 5 | RNVC: 2

10 Feb 2005

4730-99-554-5244
Backing Ring

995545244
MCM174-02-006: RNCC: 3 | RNVC: 2
002567091: RNCC: 5 | RNVC: 1
MCM/174/02/001: RNCC: 5 | RNVC: 1
002567091 ITEM 21: RNCC: 5 | RNVC: 2
MCM/174/02/001/21: RNCC: 5 | RNVC: 2
MCM/174/02/001 ITEM 21: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-708-6708
Tee Piece

997086708
NO PRIMARY REF 99-708-6708: RNCC: 3 | RNVC: 2
526LX91: RNCC: 5 | RNVC: 2

26 Jul 2005

4730-99-961-3763
Union

999613763
EA6305G683-101: RNCC: 3 | RNVC: 2

13 Feb 2009

4730-99-200-4587
Tube Coupling Inverted Nut

992004587
33533112: RNCC: 3 | RNVC: 2
816-60084: RNCC: 5 | RNVC: 2
985222: RNCC: 5 | RNVC: 2
1760032: RNCC: 5 | RNVC: 2
114101ES: RNCC: 5 | RNVC: 2
700-279973: RNCC: 6 | RNVC: 9
61PK10995: RNCC: 6 | RNVC: 9
18AB139: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-265-1180
Pipe Nipple

992651180
AM25-16BHR: RNCC: 3 | RNVC: 2

11 Jul 2001

4730-99-244-8850
Manifold Block

992448850
332234: RNCC: 3 | RNVC: 2

29 Jun 2006

4730-99-521-4683
Pipe To Tube Straight Adapter

995214683
UL16384: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-613-9549

4730-99-619-1091

4730-99-618-5164
Pipe Coupling

4730-99-536-2268
Multiple Connector

4730-99-626-3748

4730-99-214-8578
Adaptor Nut

4730-99-214-8577

4730-99-306-7045
Diffuser Tube

993067045
MS001007011: RNCC: 3 | RNVC: 2
9158: RNCC: 6 | RNVC: 9

2 Jul 2004

4730-99-529-0836
Pipe To Tube Straight Adapter

995290836
9GHD: RNCC: 3 | RNVC: 2
11NX28MM: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-891-6247
Pipe To Hose Straight Adapter

998916247
909 712 04: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-729-9054
Pipe To Tube Straight Adapter

997299054
BM 39987: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-456-4934

4730-99-462-8458

4730-99-530-7732
Tube Tee

4730-99-774-3194

4730-99-784-6553
Pipe Straight Adapter

4730-99-462-8685

4730-99-201-4397
Fueling Manifold

992014397
13002: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-209-8131
Tube Nipple

992098131
G25S: RNCC: 3 | RNVC: 1
8531: RNCC: 5 | RNVC: 2
4F8984: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-235-3914
Oil Feed Pipe

992353914
CV14804: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-377-4982
Tube To Boss Straight Adapter

993774982
MBEU 112020: RNCC: 3 | RNVC: 2
BMBEU 112020: RNCC: 5 | RNVC: 2

14 Oct 1993

4730-99-383-2333
Tube To Boss Straight Adapter

993832333
4560: RNCC: 3 | RNVC: 2

28 Oct 2009

4730-99-107-0021
Fluid Flow Restrictor Unit

991070021
22004Y050: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-405-1606
Pipe Reducer

994051606
AGS1109Q: RNCC: 2 | RNVC: 2
AGS1109-Q: RNCC: 5 | RNVC: 2
AGS1109Q: RNCC: 5 | RNVC: 2
28F11192: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-850-5158
Pipe Expansion Joint

998505158
SCD 8489-4: RNCC: 3 | RNVC: 2
2-0000-3-0/8489: RNCC: 5 | RNVC: 1
14932084: RNCC: 5 | RNVC: 2
SCD8489-4: RNCC: 5 | RNVC: 2

24 Mar 2006

4730-99-774-5493
Pipe Tee

997745493
1074 SC0 82E: RNCC: 3 | RNVC: 2
1074/SCO/82E: RNCC: 5 | RNVC: 2
H926-272847: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-371-1263
Quick Releas Nipple

993711263
64379-80-T1/38: RNCC: 3 | RNVC: 2

12 Nov 2003

4730-99-204-1733
Fluid Pressure Line Multiple Connector

992041733
11678-4: RNCC: 3 | RNVC: 2
S42823: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-784-3035
Fluid Flow Restrictor

997843035
SF16135 STD: RNCC: 3 | RNVC: 2
SF16135 STD: RNCC: 5 | RNVC: 2

29 Jun 1990

4730-99-778-5577
Hose Coupling

997785577
100019-7601-ASY: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-778-6812
Sediment Strainer Element

997786812
AP4673: RNCC: 3 | RNVC: 2

12 Apr 1985

4730-99-784-5673
Flange Elbow

997845673
FV 1055116: RNCC: 3 | RNVC: 2
FV 1055116: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-784-7762
Pipe To Tube Straight Adapter

997847762
FV1032971: RNCC: 3 | RNVC: 2
158469-A2: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-532-5977
Fluid Flow Restrictor

995325977
X77913464: RNCC: 3 | RNVC: 2
77913464: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-525-3345
Pipe Flange

995253345
1001336: RNCC: 3 | RNVC: 2
DEVS7859: RNCC: 5 | RNVC: 2
GD1156: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-728-1185
Spares Kit

997281185
C100683: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-724-2847
Hose Clip

997242847
13000490: RNCC: 3 | RNVC: 2

14 May 2004

4730-99-723-8953
Pipe Reducer

997238953
110087-2397: RNCC: 3 | RNVC: 2
26VC21737: RNCC: 6 | RNVC: 9

30 Apr 2002

4730-99-512-1996
Pipe Union

995121996
11023306: RNCC: 3 | RNVC: 2
2500600275: RNCC: 5 | RNVC: 2

14 Jun 2011

4730-99-601-4685
Pipe To Tube Straight Adapter

996014685
332SS3553: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-812-6079
Union Nut

4730-99-815-7928
Multiple Connector

4730-99-828-7891
Metallic Bent Pipe

4730-99-817-6637

4730-99-807-9680
Screwed Plug

4730-99-550-8042

4730-99-558-1108
Pipe Straight Adapter

4730-99-630-1237
Pipe To Tube Straight Adapter

996301237
2HD: RNCC: 3 | RNVC: 1
2HD: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-944-2287
Tube-Hose Fitting Compression Sleeve

999442287
W107: RNCC: 3 | RNVC: 1
5397101-2: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-530-5009
Pipe Plug

995305009
FL62-4: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-789-9292
Quick Disconnect Coupling Half

997899292
HTE 759-5-G: RNCC: 3 | RNVC: 2
HTE 759-5-G: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-795-3056
Pipe To Hose Straight Adapter

997953056
4797-5-4: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-886-2375
Connector

998862375
ARDM40104: RNCC: 3 | RNVC: 2

6 May 2004

4730-99-831-7732
Pipe To Hose Straight Adapter

998317732
AP18406: RNCC: 3 | RNVC: 2
AP18406: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-797-3740
Fluid Pressure Line Multiple Connector

997973740
8597487: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-893-6469
Pipe To Tube Straight Adapter

998936469
41048174: RNCC: 3 | RNVC: 2

21 Aug 2001

4730-99-871-6524
Tube To Hose Elbow

998716524
NO PRIMARY REF 99-871-6524: RNCC: 3 | RNVC: 2
855-17-10: RNCC: 5 | RNVC: 2

21 Jun 2010

4730-99-957-1661
Pipe Nipple

999571661
1041S: RNCC: 3 | RNVC: 2
FW61-7400-50: RNCC: 5 | RNVC: 2
FW61-7400-50: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-865-2538
Pipe To Hose Elbow

998652538
NO PRIMARY REF 99-865-2538: RNCC: 3 | RNVC: 2
RE15006: RNCC: 5 | RNVC: 2
FV141891: RNCC: 5 | RNVC: 2
LV10FV141891: RNCC: 6 | RNVC: 9
61BU10466: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-992-1429
Insert

999921429
105786: RNCC: 3 | RNVC: 2
U6010-06-06: RNCC: 6 | RNVC: 9

2 Feb 2004

4730-99-865-5070
Prot Valve Assembly

998655070
70-82-106C: RNCC: 3 | RNVC: 2

12 Mar 2008

4730-99-402-6138
Quick Coupling Half

994026138
NO PRIMARY REF 99-402-6138: RNCC: 3 | RNVC: 2
HE3901: RNCC: 5 | RNVC: 2
16C5038: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-783-7730
Hose Coupling

997837730
816-00089: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-829-8076
Pipe To Tube Straight Adapter

998298076
02730908: RNCC: 3 | RNVC: 2
027-309-08: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-553-5125
Pipe To Tube Straight Adapter

995535125
AM30-20MSCR J: RNCC: 3 | RNVC: 2
H06074100 ITEM 257: RNCC: 5 | RNVC: 2
U80129022: RNCC: 5 | RNVC: 2

6 Dec 2011

4730-99-537-4769
Pipe To Tube Straight Adapter

995374769
85-119-80-2-8002: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-773-6076
Pipe To Hose Straight Adapter

997736076
CRB-300-8-6: RNCC: 3 | RNVC: 2

26 May 2004

4730-99-836-7717
Pipe To Tube Straight Adapter

998367717
AP4493: RNCC: 3 | RNVC: 2
AP4493FV: RNCC: 5 | RNVC: 2
FV216002: RNCC: 5 | RNVC: 2
LV6MT9CDRAP4493FV: RNCC: 6 | RNVC: 9
16B8023: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-930-0602
Sediment Strainer Element

999300602
C25916: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-836-5266
Union Nut

998365266
377111W: RNCC: 3 | RNVC: 2
1G9517: RNCC: 5 | RNVC: 2
248309: RNCC: 5 | RNVC: 2
LV6MT9GB377111W: RNCC: 6 | RNVC: 9
27Y21670: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-836-2966
Pipe To Hose Straight Adapter

998362966
347055: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-836-3129
Hose Clamp

998363129
9072500: RNCC: 3 | RNVC: 2
9072500: RNCC: 5 | RNVC: 2

19 Dec 1980

4730-99-839-1424
Corner Duct Assy

998391424
M2815042700000: RNCC: 3 | RNVC: 2

11 Apr 2013

4730-99-629-2570
Pipe To Tube Straight Adapter

996292570
1085: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-839-6755
Pipe Plug

998396755
282713: RNCC: 3 | RNVC: 2
282713: RNCC: 5 | RNVC: 2
LV7LD282713: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-760-5313
Pipe To Tube Straight Adapter

997605313
154/5969: RNCC: 3 | RNVC: 1
QCA/154/5969: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-670-9697
Connector

996709697
M2815012620000: RNCC: 3 | RNVC: 2

11 Apr 2013

4730-99-728-9393
Drain Manifold Asse

997289393
13/Y/563/0020/1239/000: RNCC: 3 | RNVC: 2
Y/563/0020/1239/000: RNCC: 5 | RNVC: 1
001208041: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-051-1282
Multiple Connector

990511282
SSN.07/W/581/00/3/6: RNCC: 3 | RNVC: 2
W/581/00/3/6: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-762-4789
Fluid Passage Bolt

997624789
1050.F.010: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-533-4783
Hose Coupling

995334783
3002265: RNCC: 3 | RNVC: 2
560920-14-12: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-501-1868
Elbow

995011868
935077: RNCC: 3 | RNVC: 2
VOE935077: RNCC: 5 | RNVC: 2
CV185000: RNCC: 5 | RNVC: 2

13 Jun 2011

4730-99-667-2551
Tube Elbow

996672551
10047040: RNCC: 3 | RNVC: 2
10047040: RNCC: 5 | RNVC: 2

18 Dec 2008

4730-99-668-8280
Isolator

996688280
M2825036400000: RNCC: 3 | RNVC: 2

11 Apr 2013

4730-99-144-7112
Multiple Connector

4730-99-144-6951
Multiple Connector

4730-99-122-6913

4730-99-144-8868
Multiple Connector

4730-99-225-9767
Tube Tee

992259767
729-201-107: RNCC: 3 | RNVC: 2

2 Apr 2007

4730-99-208-7358

4730-99-751-5371

4730-99-762-7761
Packing Nut

4730-99-761-9822

4730-99-763-7961
Pipe Straight Adapter

4730-99-763-4796
Connection.Flexible

4730-99-762-4657
Pipe Straight Adapter

4730-99-184-6438
Pipe Plug

991846438
356-3875: RNCC: 3 | RNVC: 2
50043767: RNCC: 5 | RNVC: 2

8 Apr 2011

4730-99-433-2411
Tube To Boss Straight Adapter

994332411
MBEU161923: RNCC: 3 | RNVC: 2

8 Sep 2005

4730-99-617-6013
Tube Nipple

996176013
MBEU61344: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-102-6362
Pipe To Tube Straight Adapter

991026362
VU5574: RNCC: 3 | RNVC: 2
36AD1704: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-759-0743
Union Nut

997590743
125/M10: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-213-2581
Pipe Coupling

992132581
816/90707: RNCC: 3 | RNVC: 2

21 Jan 2009

4730-99-538-3110
Fluid Passage Bolt

995383110
012272: RNCC: 3 | RNVC: 2
ST012272: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-402-8467
Pipe Flange

994028467
292-2101: RNCC: 3 | RNVC: 2
LR292-2101: RNCC: 5 | RNVC: 2
X3XCLR292-2101: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-702-2648
Pipe Nipple

997022648
95414/205: RNCC: 3 | RNVC: 2

4 Feb 1997

4730-99-608-3900
Adaptor Assembly

996083900
110085SHT383: RNCC: 3 | RNVC: 2
26VC/15860: RNCC: 6 | RNVC: 9

22 Jan 2002

4730-99-538-2895
Tapped Boss

995382895
NO PRIMARY REF 99-538-2895: RNCC: 3 | RNVC: 2
502411: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-137-3321
Pipe Nipple

991373321
D40-20-20: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-774-9506
Pipe To Tube Straight Adapter

997749506
SSN.07/W/570/00/11/35: RNCC: 3 | RNVC: 1
W/570/00/11/35: RNCC: 5 | RNVC: 1
QCASSN.07/W/570/00/11/35: RNCC: 5 | RNVC: 2
99-538-4148: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-206-6343
Pipe To Hose Straight Adapter

992066343
E350-4: RNCC: 3 | RNVC: 2
D301761TEM16: RNCC: 5 | RNVC: 2
GME731331TEM45: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-806-2585
Tube-Hose Fitting Compression Sleeve

998062585
N1021B/A: RNCC: 3 | RNVC: 2
13435: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-148-6384
Pipe To Tube Straight Adapter

991486384
100A50434-9: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-773-2544
Fluid Passage Bolt

997732544
201-45710: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-99-778-0131
Pipe To Tube Straight Adapter

997780131
2979K013: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-778-0039
Hose Assembly

997780039
2861K530: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-777-6346
Adaptor

997776346
C39284: RNCC: 3 | RNVC: 2

7 Nov 1991

4730-99-777-7817
Fluid Passage Bolt

997777817
ND 33542: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-761-8016
Quick Disc Coupling

997618016
38 8153 00: RNCC: 3 | RNVC: 2
TX23: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-759-2092
Union Nut

997592092
11499244: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-761-6178
Pipe Unit Power Tur

997616178
RUB7196: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-761-5762
Pipe Nipple

997615762
33554119: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-787-2041
Extension

997872041
328085: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-782-5168
Pipe Elbow

997825168
THL39260: RNCC: 3 | RNVC: 2

29 Jul 1988

4730-99-790-8848
Tube Reducer

997908848
C.84235: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-783-9020
Tube-Hose Fitting Compression Sleeve

997839020
NAJ1573: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-779-6670
Pipe Tee

997796670
9611: RNCC: 3 | RNVC: 1
08405: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-779-5265
Pipe Tee Adaptor

997795265
218-5221: RNCC: 3 | RNVC: 2
218-5221: RNCC: 5 | RNVC: 2
218-5221: RNCC: 5 | RNVC: 2

31 Oct 1992

4730-99-761-2001
Tube Coupling Inverted Nut

997612001
11499321: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-784-4255
Winch Brak Adaptors

997844255
0484855: RNCC: 3 | RNVC: 2
LC1030: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-761-6746
P1pe Vn1t

997616746
RUB6762: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-782-4985
Pipe Plug

997824985
Y17329: RNCC: 3 | RNVC: 2
1106857Q00: RNCC: 5 | RNVC: 2
17329: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-620-3335

4730-99-550-1010
Pipe Straight Adapter

4730-99-977-2402

4730-99-445-5690

4730-99-779-9808
Pipe Straight Adapter

4730-99-746-5198
Pipe Straight Adapter

4730-99-738-9730

4730-99-738-9696

4730-99-748-5017
Wye Connector

4730-99-744-5622

4730-99-748-4978

4730-99-728-8317

4730-99-747-9549
Union Screw

4730-99-788-6714
Fluid Passage Bolt

4730-99-710-5098
Fluid Pressure Line Multiple Connector

997105098
VU23168: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-952-4278
Pi Straight Adaptor

999524278
M2566299-3: RNCC: 3 | RNVC: 2
M2566299-3: RNCC: 5 | RNVC: 2
M2566299-3: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-788-9002
Pipe To Tube Straight Adapter

997889002
B49358: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-836-2998
Pipe To Tube Straight Adapter

998362998
T8506: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-543-9405
Double Pipe Elbow

995439405
S63-9608-01: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-801-1352
Union Nut

998011352
NO PRIMARY REF 99-801-1352: RNCC: 3 | RNVC: 2
LV6MT1-21493: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-736-5141
Pipe Plug

997365141
TF190-1106: RNCC: 3 | RNVC: 9

25 Apr 1991

4730-99-558-6558
Tube Reducer

995586558
32004-26: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-535-9409
Plug

995359409
NO PRIMARY REF 99-535-9409: RNCC: 3 | RNVC: 2
24014516: RNCC: 5 | RNVC: 2
TT7779523: RNCC: 6 | RNVC: 9

24 Oct 2001

4730-99-523-5845
Pipe Reducer

995235845
1074-400-27: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-781-4939
Adapter Bushing

997814939
S8-81-1162XAA: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-774-1562
Pipe Tee

997741562
36-0549-06: RNCC: 3 | RNVC: 2
6734M: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-786-8672
Orifice Plate

997868672
E048F725993: RNCC: 3 | RNVC: 2
111594: RNCC: 5 | RNVC: 1
111594/32N: RNCC: 5 | RNVC: 2

14 Jun 1994

4730-99-619-7254
Hose Clamp

996197254
C4596-61NX5-81NB: RNCC: 3 | RNVC: 2
26DE8587: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-601-9428
Hose Clamp

996019428
95264776: RNCC: 3 | RNVC: 2
CV178103: RNCC: 5 | RNVC: 2
122A23S6: RNCC: 5 | RNVC: 2

20 Dec 2010

4730-99-628-9344
Tube Elbow

996289344
FV 2067223: RNCC: 3 | RNVC: 2
738551: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-206-6955
Hose Clamp

992066955
43828D: RNCC: 3 | RNVC: 2
162627: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-661-8874
Pipe To Tube Straight Adapter

996618874
FV 2112001: RNCC: 3 | RNVC: 2
FV 2112001: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-793-8317
Fluid Flow Restrictor

997938317
TF 190-1006: RNCC: 3 | RNVC: 9

25 Apr 1991

4730-99-700-3598
Pipe Coupling

997003598
3847: RNCC: 3 | RNVC: 2
Y101 247 07: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-558-6425
Union Nut

4730-99-137-8522
Union Nut

4730-99-552-4895

4730-99-559-0075

4730-99-558-1553

4730-99-530-5494
Pipe Tee Adaptor

995305494
SSN07Y531-109SW109: RNCC: 3 | RNVC: 1
QCASSN07Y531-109SW109: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-845-9766
Sediment Strainer Element

998459766
004498 500 ITEM 10: RNCC: 3 | RNVC: 2
004498 500: RNCC: 5 | RNVC: 1
720M0315: RNCC: 5 | RNVC: 1
004498 500-10: RNCC: 5 | RNVC: 2
720M0315-10: RNCC: 5 | RNVC: 2
720M0315 ITEM 10: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-761-9313
Pipe To Tube Straight Adapter

997619313
2710618: RNCC: 3 | RNVC: 2
271C0618: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-203-8976

4730-99-207-3518
Union Inverted Nut

4730-99-207-8112
Pipe Reducer

4730-99-767-5780
Flame Trap

4730-99-782-9604
Sleeve

4730-99-214-6222
Pipe Reducer

4730-99-766-7512
Straight Adaptor

4730-99-977-6269

4730-99-792-8307

4730-99-782-8044
Pipe Straight Adapter

4730-99-797-2664
Multiple Connector

4730-99-794-0433
Fluid Passage Bolt

4730-99-777-4538

4730-99-777-4535

4730-99-705-6405
Drain Connector

997056405
110087-4253: RNCC: 3 | RNVC: 2
26VC22081: RNCC: 6 | RNVC: 9

10 Apr 2002

4730-99-532-5346
Pipe Tee

995325346
SF/324/AB/070: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-528-4454
Tube Fitting Brazing Ferrule

995284454
E1-8643C: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-151-5900
Pipe Elbow

991515900
NO PRIMARY REF 99-151-5900: RNCC: 3 | RNVC: 2
710589: RNCC: 5 | RNVC: 2

8 Mar 2010

4730-99-728-4976
Coupling Air

997284976
200-007-001: RNCC: 3 | RNVC: 2
15-901100: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-184-5558
Ho Straight Adaptor

991845558
NO PRIMARY REF 99-184-5558: RNCC: 3 | RNVC: 2
O241-7719: RNCC: 5 | RNVC: 2

28 Nov 2001

4730-99-464-3678
Connector

994643678
M2815005500000: RNCC: 3 | RNVC: 2

11 Apr 2013

4730-99-327-4707
Quick Disconnect Coupling Half

993274707
88103312: RNCC: 3 | RNVC: 2
IB8NMC4: RNCC: 5 | RNVC: 2

22 Apr 2013

4730-99-136-9528
Hose Elbow

991369528
6632-12: RNCC: 3 | RNVC: 2
31N20006: RNCC: 6 | RNVC: 9

18 Jan 1977

4730-99-552-6191

4730-99-789-4961
Pipe Tee

997894961
12/16MM: RNCC: 3 | RNVC: 2
12-16MM: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-408-6099
Pipe To Tube Straight Adapter

994086099
S2750B: RNCC: 3 | RNVC: 2
16B8319: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-459-2182

4730-99-765-9255
Fluid Passage Bolt

4730-99-767-5809
Test Connection And

4730-99-412-1635

4730-99-835-7606

4730-99-711-9881
Screwed Plug

997119881
S60-3521-50: RNCC: 3 | RNVC: 2
PC642551-2: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-454-9170
Adapter

994549170
NO PRIMARY REF 99-454-9170: RNCC: 3 | RNVC: 2
5646300: RNCC: 5 | RNVC: 2
C581-LWM042426: RNCC: 6 | RNVC: 9

20 Jun 2001

4730-99-461-6147
Connection Pipe

994616147
NO PRIMARY REF 99-461-6147: RNCC: 3 | RNVC: 2
0259-9621: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-123-3386
Fluid Passage Bolt

991233386
B1872-305: RNCC: 3 | RNVC: 2
B1872-305: RNCC: 5 | RNVC: 9
26DN4398: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-254-2014
Union Nut

992542014
71-MZ-578: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-367-2136
Pipe To Boss Straight Adapter

993672136
386-6212: RNCC: 3 | RNVC: 2
50053199: RNCC: 5 | RNVC: 2

18 Sep 2013

4730-99-426-7924
Pipe To Tube Straight Adapter

994267924
YB6-57-46: RNCC: 3 | RNVC: 2
26NA10231: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-950-8400
Pipe To Tube Straight Adapter

999508400
S2919S: RNCC: 3 | RNVC: 2
RSS5181: RNCC: 5 | RNVC: 2
B111-1109: RNCC: 5 | RNVC: 2
4F7719: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-714-8041
Fluid Fl Restrictor

997148041
NO PRIMARY REF 99-714-8041: RNCC: 3 | RNVC: 2
FW61-1074-54: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-544-2645
Packing Nut

995442645
SSN02-700-808-1011: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-413-8163
Hydraulic Coupling

994138163
NO PRIMARY REF 99-413-8163: RNCC: 3 | RNVC: 2
ND25730R: RNCC: 5 | RNVC: 2
C569-70T269089: RNCC: 6 | RNVC: 9

16 Apr 2002

4730-99-536-8218
Fluid Flow Restrictor Unit

995368218
TZ.445 523: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-424-4218
Anchor And Reinforcement Pipe Clamp

994244218
F204831: RNCC: 3 | RNVC: 2
F204831: RNCC: 3 | RNVC: 9
26FX5147: RNCC: 6 | RNVC: 9
26FX5147: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-980-9162
Tube Reducer

999809162
79901954: RNCC: 3 | RNVC: 2
FT550278: RNCC: 5 | RNVC: 2
2500601838: RNCC: 5 | RNVC: 2

19 Sep 2011

4730-99-979-2705
Fluid Passage Bolt

999792705
20781218: RNCC: 3 | RNVC: 2
CV184884: RNCC: 5 | RNVC: 2
VOE20781218: RNCC: 5 | RNVC: 2

11 Apr 2011

4730-99-204-0695
Pipe Elbow

992040695
261: RNCC: 3 | RNVC: 1

25 Apr 1991

4730-99-132-3581
Pipe Tee Assembly

991323581
D4883: RNCC: 3 | RNVC: 2
MDR5010: RNCC: 6 | RNVC: 9
21C3825: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-152-9399
Connector

991529399
M2825050620100: RNCC: 3 | RNVC: 2

10 Feb 2012

4730-99-500-5484
Tube Tee

995005484
SST/Y/790/20/1271/000: RNCC: 3 | RNVC: 2

2 Nov 1996

4730-99-780-2450
Pipe Reducer

997802450
SF/212/CP/006: RNCC: 3 | RNVC: 1

25 Apr 1991

4730-99-779-3263
Tube Reducer

997793263
MF/00218/CN/001: RNCC: 3 | RNVC: 2
004464660: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-780-3810
Pipe To Tube Straight Adapter

997803810
A147-004: RNCC: 3 | RNVC: 2
A147/004: RNCC: 5 | RNVC: 2
J852-925901: RNCC: 6 | RNVC: 9
H926-272904: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-778-9798
Pipe To Tube Straight Adapter

997789798
4073/8US: RNCC: 3 | RNVC: 2
037818: RNCC: 5 | RNVC: 2
ST037818: RNCC: 5 | RNVC: 2
99-560-3649: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-796-9702
Pipe To Tube Straight Adapter

997969702
103/1066/PA.172: RNCC: 3 | RNVC: 2
PA.172: RNCC: 5 | RNVC: 1
H926-346728: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-212-7904
Hose Clamp

992127904
GBS 30/18 W1 SK: RNCC: 3 | RNVC: 2

11 Apr 2005

4730-99-151-6821
Tube To Hose Straight Adapter

991516821
NO PRIMARY REF 99-151-6821: RNCC: 3 | RNVC: 2
805-21-12: RNCC: 5 | RNVC: 2

21 Jun 2010

4730-99-546-4495
Sediment Strainer Element

995464495
UCSE1326: RNCC: 3 | RNVC: 2
PG705420: RNCC: 5 | RNVC: 2
4128688: RNCC: 5 | RNVC: 2
SE-1326: RNCC: 5 | RNVC: 2
UC-SE-1326: RNCC: 6 | RNVC: 9
PGQ705420: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-600-6480
Pipe Cross

996006480
40SS3554: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-839-1772
Connector

998391772
M2815010120000: RNCC: 3 | RNVC: 2

11 Apr 2013

4730-99-838-1514
Flange Tee

998381514
83.MY.527: RNCC: 3 | RNVC: 2

19 May 1995

4730-99-835-5898
Double-Ended Union

998355898
1G2633: RNCC: 3 | RNVC: 9

25 Apr 1991

4730-99-665-7477
Quick Disconnect Coupling Half

996657477
FFM714NPT: RNCC: 3 | RNVC: 2

27 Aug 2002

4730-99-723-9510
Pipe Straight Adapter

4730-99-710-1097
Pipe To Hose Elbow

4730-99-710-3767

4730-99-710-1492

4730-99-710-2119

4730-99-968-4500
Adaptor

999684500
BT33050-46: RNCC: 3 | RNVC: 1
QCA/BT33050-46: RNCC: 5 | RNVC: 2

27 Sep 2005

4730-99-488-8191
Pipe Flange

994888191
54-71-00505-00: RNCC: 3 | RNVC: 2

11 Feb 2009

4730-99-279-8615
Right Angle Adapter

992798615
RN1-038: RNCC: 3 | RNVC: 2
MOD-0038: RNCC: 5 | RNVC: 2

14 May 2004

4730-99-540-0891
Fluid Pressure Line Multiple Connector

995400891
C79148: RNCC: 3 | RNVC: 2
737-175902: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-526-4266
Sediment Strainer Element

995264266
099150109: RNCC: 3 | RNVC: 2
H677-526-4266: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-789-7557
Pipe To Tube Straight Adapter

997897557
1074/AC 814: RNCC: 3 | RNVC: 2
AC 814: RNCC: 5 | RNVC: 1
1074 AC 814: RNCC: 5 | RNVC: 2
H926-298562: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-118-1255
Tube Nipple

991181255
FV 2067211: RNCC: 3 | RNVC: 2
737801: RNCC: 5 | RNVC: 2
137801006: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-701-1442
Adapter Bushing

997011442
HTE170019: RNCC: 3 | RNVC: 2
FV 2158203: RNCC: 5 | RNVC: 2
FV 2158203: RNCC: 5 | RNVC: 2

28 Aug 1991

4730-99-301-6476
Hydraulic Adapter

993016476
15.4N: RNCC: 3 | RNVC: 2
FH9644B0012: RNCC: 6 | RNVC: 9

25 Apr 1996

4730-99-425-8416
Conn Rib 25 St

994258416
M2815041820100: RNCC: 3 | RNVC: 2

23 May 2012

4730-99-501-1050
Nonmetallic Hose Assembly

995011050
FV 2141915: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-461-4373
Tube Elbow

994614373
76/WV12S: RNCC: 3 | RNVC: 2
G406/8015 ITEM 49: RNCC: 5 | RNVC: 2
G406/8015/49: RNCC: 5 | RNVC: 2

7 Aug 2002

4730-99-728-4177
Pipe Coupling

4730-99-741-7403
Pipe Elbow

4730-99-766-2679
Pipe Elbow

4730-99-775-8218

4730-99-775-9641
Pipe Tee

4730-99-785-4268
Vicolet Boss

4730-99-802-1218

4730-99-801-1468

4730-99-730-1535

4730-99-748-9945
Metallic Bent Pipe

4730-99-748-3472
Brass Pipe

4730-99-749-1930

4730-99-761-4754

4730-99-784-9674

4730-99-784-6517
Vent Boss And Screw

4730-99-784-6178
Pipe Bend

4730-99-780-9943
Pipe Reducer

4730-99-411-9472

4730-99-782-4831
Sediment Strainer

4730-99-208-7911
Hose Clamp

4730-99-838-1557
Pipe To Tube Union

998381557
75MHD: RNCC: 3 | RNVC: 1

7 Feb 1996

4730-99-209-1471

4730-99-214-9325

4730-99-850-0729

4730-99-819-4316
Packing Nut

998194316
FV732107: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-801-8343

4730-99-821-3129
Pipe Coupling

998213129
J256: RNCC: 3 | RNVC: 1

4 Nov 2002

4730-99-780-9917

4730-99-799-5501
Pipe Nipple

4730-99-851-1517
Clamp

998511517
83933901: RNCC: 3 | RNVC: 2

14 May 2004

4730-99-774-7724
Three Way Piece

4730-99-781-7230

4730-99-824-3745
Coupling Half Ring

998243745
AVA1524F: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-824-3971
Coupling Half Ring

998243971
AVA1524J: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-214-3178

4730-99-822-4797
Compression Sleeve

4730-99-799-1030

4730-99-802-6800
Pipe Nipple

4730-99-412-2503

4730-99-538-3018
Pipe Plug

995383018
Y3J10917: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-643-7846
Quick Disconnect Coupling Half

996437846
HTE711-71B: RNCC: 3 | RNVC: 2
CHA139026: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-051-9412
Pipe To Tube Straight Adapter

990519412
GE12-PLR-ED/71: RNCC: 3 | RNVC: 2
GE12-PLR-ED: RNCC: 5 | RNVC: 1

29 Sep 1995

4730-99-145-9286
Drive Coupling

991459286
B38/38/22K6X55: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-083-4453
Adaptor

990834453
AX-22-37782: RNCC: 3 | RNVC: 2
XP98PD01950: RNCC: 6 | RNVC: 9

5 May 1998

4730-99-906-5755
Pipe Tee

999065755
NUTEE-10: RNCC: 3 | RNVC: 2
CV172416: RNCC: 5 | RNVC: 2

25 Oct 2010

4730-99-958-8308
Connector

999588308
M2815004220000: RNCC: 3 | RNVC: 2

11 Apr 2013

4730-99-616-6698
Pipe Assembly

996166698
8831959: RNCC: 3 | RNVC: 2
2300814: RNCC: 5 | RNVC: 2

29 Mar 1990

4730-99-422-2227
Pipe To Tube Straight Adapter

994222227
808727: RNCC: 3 | RNVC: 2
27Q37091: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-352-4648
Tube Elbow

993524648
1698662: RNCC: 3 | RNVC: 2

4 Jul 2007

4730-99-836-7226
Steel Pipe

998367226
340026: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-925-0685
Valve

999250685
828031: RNCC: 3 | RNVC: 2

8 Apr 2008

4730-99-836-3458
Pipe To Tube Tee

998363458
34011327: RNCC: 3 | RNVC: 2
055387: RNCC: 5 | RNVC: 2
55387: RNCC: 5 | RNVC: 2
939 601 00: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-930-2447
Lamp Assembly

999302447
MEXE42135: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-839-9238
Union Nut

998399238
ST16657: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-938-1832
Keeper Block

999381832
Y35202M: RNCC: 3 | RNVC: 2
35202M: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-860-0525
Hose Clamp

998600525
97S09: RNCC: 3 | RNVC: 2
CV129820: RNCC: 5 | RNVC: 2

28 Oct 2013

4730-99-840-5417
Tube Elbow

998405417
210400600: RNCC: 3 | RNVC: 2
210400600: RNCC: 5 | RNVC: 2

21 Aug 2013

4730-99-439-7344
Flange To Tube Straight Adapter

994397344
EU2810B009-041: RNCC: 3 | RNVC: 2

3 Dec 1996

4730-99-654-5489
Flange To Tube Elbow

996545489
1293-1017: RNCC: 3 | RNVC: 2
1293-1017: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-513-2270
Hose

995132270
NO PRIMARY REF 99-513-2270: RNCC: 3 | RNVC: 2
VL5402922: RNCC: 5 | RNVC: 2
9920I0018: RNCC: 6 | RNVC: 9

11 Oct 1999

Load More Results