What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Pipe Bend?

A Return Pipe Bend (BEND,PIPE,RETURN) is a fitting designed to join a pipe in a parallel position to another pipe for reversing the flow of gas, steam, air, or liquids. Excludes BEND, SOIL PIPE.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Soil Pipe Reducer?

A Soil Pipe Reducer (REDUCER,SOIL PIPE) is a straight fitting with the spigot end larger than the hub end. It is used to connect two pieces of soil pipe of different size.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Pipe Lateral?

A Pipe Lateral (LATERAL,PIPE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit pipes and/or pipe fittings to be taken off laterally from the main line. It may have side inlet(s).

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Soil Pipe Lateral?

A Soil Pipe Lateral (LATERAL,SOIL PIPE) is a fitting having one or two branches which are fixed at various angles other than 90 degrees to the run. If item has two branches, they will be located on opposite sides of the run (180 degrees apart) and will be identical. It may have side inlets.

What is a Soil Pipe Tee?

A Soil Pipe Tee (TEE,SOIL PIPE) is a fitting consisting of a run and a branch. The branch may be either curved or straight, but the axis of the end connection intersects the axis of the run at right angles. It may have side inlets.

What is a Tube Coupling Inverted Nut?

A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.

What is a Tube Coupling Nut?

A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.

What is an Union Tailpiece?

An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.

What is an Union Thread Piece?

An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - United Kingdom (UK)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by United Kingdom (UK) - NCB is 99

Page 128 of 242

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by United Kingdom

47	30	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - United Kingdom (UK)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 43 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 608 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 26 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 14 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 16 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
What is a Bulkhead Hose Connector? 44 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 123 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 192 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 30 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Cap? 97 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 18 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 1095 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 322 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 1326 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 970 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 64 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Pipe To Hose Straight Adapter? 986 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 8242 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 197 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Pipe Bushing? 294 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Hose Nipple? 57 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 1594 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 953 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 86 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 586 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Tube Union? 47 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 172 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Pipe Bend? 11 Items: A Return Pipe Bend (BEND,PIPE,RETURN) is a fitting designed to join a pipe in a parallel position to another pipe for reversing the flow of gas, steam, air, or liquids. Excludes BEND, SOIL PIPE.
What is a Return Tube Bend? 18 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 33 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 131 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Soil Pipe Reducer? 28 Items: A Soil Pipe Reducer (REDUCER,SOIL PIPE) is a straight fitting with the spigot end larger than the hub end. It is used to connect two pieces of soil pipe of different size.
What is a Pipe Flange? 1150 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Machine Thread Plug? 108 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Pipe Lateral? 30 Items: A Pipe Lateral (LATERAL,PIPE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit pipes and/or pipe fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Tube Lateral? 16 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 122 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 2442 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 18 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 312 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Tube Tee? 892 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Soil Pipe Lateral? 30 Items: A Soil Pipe Lateral (LATERAL,SOIL PIPE) is a fitting having one or two branches which are fixed at various angles other than 90 degrees to the run. If item has two branches, they will be located on opposite sides of the run (180 degrees apart) and will be identical. It may have side inlets.
What is a Soil Pipe Tee? 10 Items: A Soil Pipe Tee (TEE,SOIL PIPE) is a fitting consisting of a run and a branch. The branch may be either curved or straight, but the axis of the end connection intersects the axis of the run at right angles. It may have side inlets.
What is a Tube Coupling Inverted Nut? 365 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Tube Coupling Nut? 113 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is an Union Tailpiece? 217 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 61 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Pipe Swivel Joint? 56 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 525 Items
What is a Sediment Strainer? 692 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 24 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 54 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 16 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 228 Items
What is a Pipe Repair Clamp? 51 Items: A Pipe Repair Clamp (CLAMP,REPAIR,PIPE) is a one-piece or two-piece metal clamp generally used with gasket(s) and designed to repair longitudinal splits and pit holes and/or to support thin walls in a straight run of pipe. See also CLAMP, LEAK REPAIR, PIPE COUPLING.
What is a Pipe Cap? 247 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 238 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 14 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 1072 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 1811 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 551 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
What is a Hose Reducer? 41 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 2097 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 1319 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Pipe Cross? 115 Items: A Pipe Cross (CROSS,PIPE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is designed to be used as a junction at the intersection of pipe and/or pipe fittings.
What is a Pipe To Tube Cross? 58 Items: A Pipe To Tube Cross (CROSS,PIPE TO TUBE) is a fitting having four branches in the same plane whose axes form right angles. One or more of the connections have standard pipe threads or are unthreaded and designed to accommodate a pipe. The remaining connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It may have side inlet(s).
What is a Tube Cross? 86 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Spool Piece? 28 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Water Closet Bend? 10 Items: A Water Closet Bend (BEND,WATER CLOSET) is a waste line fitting designed for use with a water closet, to provide a means of connecting a water closet bowl to a waste line.
What is a Pipe Locknut? 74 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 21 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Drainage Pipe Lateral? 23 Items: A Drainage Pipe Lateral (LATERAL,DRAINAGE PIPE) is a fitting having one or two branches which are fixed at various angles other than 90 degrees (1.5705 radians) to the run. It is used as a junction at the intersection of a drainage line and is provided with a shoulder(s) at the end(s) of its internal threaded or unthreaded portion, conforming to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It may have side inlet(s).
What is a Hose Clamp? 1782 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is a Fuel Feeder Manifold? 10 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Soil Pipe Plug? 10 Items: A Soil Pipe Plug (PLUG,SOIL PIPE) is a fitting designed to fit into the hub end of soil pipe or a soil pipe fitting for sealing.
What is a Pipe Clamp Coupling? 59 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is an Air Line Manifold? 48 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 17 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 153 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 186 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 570 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 70 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 522 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 24 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 565 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Elbow Assembly? 11 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Fluid Flow Restrictor? 857 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 36 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Self-Sealing Coupling Half? 218 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 11 Items
What is a Drainage Pipe Elbow? 29 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Pipe True Wye? 40 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 20 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 24 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Sediment Strainer Element? 1052 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 1394 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 1435 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1839 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 139 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is an Union Nut? 1395 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Quick Disconnect Coupling Assembly? 63 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 63 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 20 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Magnetic Pipe Plug? 43 Items: A Magnetic Pipe Plug (PLUG,PIPE,MAGNETIC) is a pipe fitting primarily designed for installation in a lubrication or hydraulic system. It has an integral magnet in the body and external pipe threads.
What is a Hose To Boss Straight Adapter? 51 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 242 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 473 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 37 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 13 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Pipe To Boss Elbow? 20 Items: A Pipe To Boss Elbow (ELBOW,PIPE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a pipe or pipe fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like. See also ELBOW, PIPE; and ELBOW, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Boss Elbow? 66 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 44 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Pipe To Boss Tee? 10 Items: A Pipe To Boss Tee (TEE,PIPE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a pipe or pipe fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Tube To Boss Tee? 35 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 59 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Boss Nipple? 29 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Pipe Outlet? 23 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 23 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 26 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Hose Straight Adapter? 110 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 86 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 57 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Flange Elbow? 169 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 11 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 18 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Pipe Elbow? 65 Items: A Flange To Pipe Elbow (ELBOW,FLANGE TO PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 118 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Flange Tee? 38 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Soil Pipe Coupling? 21 Items: A Soil Pipe Coupling (COUPLING,SOIL PIPE) is a straight fitting used to connect two pieces of soil pipe of the same size.
What is a Quick Disconnect Plug? 17 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Suction Strainer? 51 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Coupling Swage Ferrule? 19 Items: A Tube Coupling Swage Ferrule (FERRULE,SWAGE,TUBE COUPLING) is a flanged cylindrical metallic item used with a plain end tube and swaged in place. It is designed to be used as a component part of a flexible or rigid tube coupling.
What is a Tube Fitting Insert? 10 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Fluid-Emulsion Spray Nozzle? 46 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 10 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 12 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 11 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Quick-Disconnect Nipple? 12 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is an Exhaust-Intake Pneumatic Muffler? 23 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Flange To Flange Straight Adapter? 29 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
Connector,Tubing,Straight 28 Items
What is a Hydraulic Manifold Assembly? 264 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Tube Swivel Joint? 20 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
Adapter,Check Valve 11 Items
Nipple,Special 34 Items
Adapter Assembly,Valve 18 Items
Adapter And Flange Assembly 17 Items
What is a Tube Coupling Assembly? 18 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 65 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Special-Shaped Hose Clamp? 15 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Pipe To Tube Swivel Joint? 21 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Tube Fitting Compression Ferrule? 60 Items: A Tube Fitting Compression Ferrule (FERRULE,COMPRESSION,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be slipped over tubing. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled, the joint seals at the seat in a manner similar to a seat type union.
What is a Pipe Fitting Flared Collar? 39 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 590 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 63 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 53 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Hydraulic Swivel Joint? 54 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 209 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.

Stock Items From Supply Class 4730 Page 128 of 242

4730-99-773-9606

4730-99-769-7217
Pipe Tee Adaptor

4730-99-723-4924
Pipe Tee

4730-99-404-1206

4730-99-735-8575

4730-99-420-3074
Hose Coupling

4730-99-720-2361
Pipe Flange

4730-99-723-7106

4730-99-710-4789

4730-99-732-5870

4730-99-867-3162
Pipe To Tube Straight Adapter

998673162
FV414705: RNCC: 3 | RNVC: 2
LV9AHYFV414705: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-748-2383
Pipe To Tube Tee

997482383
11499547: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-826-0575
Hose Clamp

998260575
SNP6: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-911-1965
Coupling

999111965
86036096: RNCC: 3 | RNVC: 2
TT7777798: RNCC: 6 | RNVC: 9

15 Jan 2002

4730-99-825-4577
Hose Tee

998254577
P2119: RNCC: 3 | RNVC: 2
77748G: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-826-9915
Fluid Flow Restrictor

998269915
FV936094: RNCC: 3 | RNVC: 2

13 Mar 1981

4730-99-825-3414
Pipe Fittin Adaptor

998253414
2695253: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-828-1427
Tube Nipple

998281427
FV 858371: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-824-8808
Tube Elbow

998248808
46945: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-826-6014
Tube Coupling

998266014
36 0503 07: RNCC: 3 | RNVC: 2
ST46232: RNCC: 5 | RNVC: 2
FV 2027875: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-911-1904
Hose Tail-End

999111904
SF21575: RNCC: 3 | RNVC: 2
FL980270001: RNCC: 6 | RNVC: 9

2 Mar 1998

4730-99-995-6905
Connector

999956905
M2825062200000: RNCC: 3 | RNVC: 2

11 Apr 2013

4730-99-995-6911
Conn Rib 22 Obfeed

999956911
M2825062320100: RNCC: 3 | RNVC: 2

11 Apr 2013

4730-99-560-3732
Tube Reducer

995603732
ND25080: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-139-5320
Union Nut

991395320
775010: RNCC: 3 | RNVC: 2
3NCR: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-286-0057
Pipe Plug

992860057
U80019901: RNCC: 3 | RNVC: 2

3 Jan 2012

4730-99-746-9085
Pipe Flange

997469085
010-21801: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-830-4503
Fluid Passage Bolt

998304503
FV839964: RNCC: 3 | RNVC: 2

30 Jul 1980

4730-99-830-9040
Tube Coupling Inverted Nut

998309040
8839210: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-829-9375
Tube Coupling Inverted Nut

998299375
LE308: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-806-3808
Pipe To Tube Straight Adapter

998063808
OX147A: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-806-7155
Tube Coupling

998067155
919982: RNCC: 3 | RNVC: 2
70919982: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-765-7378
Pipe To Tube Straight Adapter

997657378
9151Y014: RNCC: 3 | RNVC: 2
DP5801: RNCC: 5 | RNVC: 2
9151Y013: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-772-4772
Pipe To Tube Straight Adapter

997724772
BF35729: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-808-2047
Pipe To Tube Straight Adapter

998082047
691303: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-087-4447
Pipe To Hose Straight Adapter

990874447
97150504: RNCC: 3 | RNVC: 2
A15690: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-812-8806
Connector

998128806
A 541 017 03 024: RNCC: 3 | RNVC: 2
A 541 017 03 024: RNCC: 5 | RNVC: 2
CV155941: RNCC: 5 | RNVC: 2
A 541 017 03 024: RNCC: 5 | RNVC: 2

14 Jul 2009

4730-99-910-4518
N Connecting Sleeve

4730-99-037-0740
Tube Tee

990370740
ETM12B: RNCC: 3 | RNVC: 2
WE128B: RNCC: 6 | RNVC: 9

25 Sep 1997

4730-99-148-3280
Pipe To Tube Straight Adapter

991483280
867301T5: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-363-9948
Sediment Strainer

993639948
K20003: RNCC: 3 | RNVC: 2
FIGURE 808: RNCC: 5 | RNVC: 1

19 Jan 1993

4730-99-958-3246
Pipe Swing Joint

999583246
7525.83.A: RNCC: 3 | RNVC: 2

11 Mar 2009

4730-99-795-3070
Pipe To Tube Elbow

997953070
6-6CBTXS: RNCC: 3 | RNVC: 2

16 Sep 1985

4730-99-000-6306

4730-99-396-8949
Liquid Jet Eductor

993968949
JFAHH10/98053: RNCC: 3 | RNVC: 2
98053: RNCC: 5 | RNVC: 2

15 Aug 2000

4730-99-666-9396
Hydraulic System Accessories Manifold

996669396
H53010201: RNCC: 3 | RNVC: 1
14641709: RNCC: 5 | RNVC: 2
QCA/H53010201: RNCC: 5 | RNVC: 2

20 Sep 2007

4730-99-061-4299
Tube Coupling

990614299
HSP1720-20: RNCC: 3 | RNVC: 2
8747898: RNCC: 5 | RNVC: 2
1720-20: RNCC: 5 | RNVC: 2
FH970AA0036: RNCC: 6 | RNVC: 9

8 Sep 1997

4730-99-720-9539
Tube Reducer

997209539
EN3566-0806: RNCC: 2 | RNVC: 2
BSEN3566-0806: RNCC: 5 | RNVC: 2

1 Jun 2000

4730-99-311-3343
Pipe Plug

993113343
892/00055A: RNCC: 3 | RNVC: 2
892/00055: RNCC: 5 | RNVC: 9
FH9643Z0016: RNCC: 6 | RNVC: 9

23 Apr 1996

4730-99-615-1380
Tube Tee

996151380
KB290K0039-000: RNCC: 3 | RNVC: 2
KB290K0039-000: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-509-6971
Pipe Plug

995096971
01000700/2: RNCC: 3 | RNVC: 2
01000700/2: RNCC: 5 | RNVC: 2
01000700/2: RNCC: 5 | RNVC: 2
010PT0002: RNCC: 6 | RNVC: 9

8 Jun 2001

4730-99-801-1531
Lubrication Fitting

998011531
NA5793-1: RNCC: 3 | RNVC: 2
DEFSTAN47-7: RNCC: 6 | RNVC: 9
LV6MT1TTNA5793-1: RNCC: 6 | RNVC: 9
16B2171: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-075-2709
Pi Straight Adaptor

990752709
596040: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-225-9747
Hydraulic Manifold Assembly

992259747
PE23369: RNCC: 3 | RNVC: 2

8 Mar 2007

4730-99-830-1604
Steel Pipe Assembly

998301604
3552A013: RNCC: 3 | RNVC: 2
02/200360: RNCC: 5 | RNVC: 2
3552A012: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-603-5179
Pipe To Tube Straight Adapter

996035179
A271969: RNCC: 3 | RNVC: 2
A271969: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-205-7708
Sediment Strainer Element

992057708
788: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-269-3540
Pipe Elbow

992693540
935080: RNCC: 3 | RNVC: 2
CV186077: RNCC: 5 | RNVC: 2
VOE935080: RNCC: 5 | RNVC: 2

21 Jun 2011

4730-99-441-9803
Swivel Joint

994419803
6533700: RNCC: 3 | RNVC: 2
6533700: RNCC: 5 | RNVC: 2

12 Dec 1991

4730-99-609-8602
Tube Nipple

996098602
HC 100: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-578-4175
Hose Clamp

995784175
JHD500010: RNCC: 3 | RNVC: 2

20 Jan 2010

4730-99-422-9213
Quick Disconnect Coupling Half

994229213
PT8817: RNCC: 3 | RNVC: 2
274B: RNCC: 5 | RNVC: 2
304C: RNCC: 5 | RNVC: 2
4F1781: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-438-2956
Pipe Nipple

994382956
11013857: RNCC: 3 | RNVC: 2
2500600864: RNCC: 5 | RNVC: 2

14 Jun 2011

4730-99-563-0187
Hose Tee

995630187
UX17277: RNCC: 3 | RNVC: 2
PLC425: RNCC: 5 | RNVC: 1
UX17277RRA: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-563-4735
Pipe To Hose Straight Adapter

995634735
OE49960: RNCC: 3 | RNVC: 2
Y105 217 10: RNCC: 5 | RNVC: 2
POE49960: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-639-4327
Brass Pipe

996394327
094726: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-534-7615
Sediment Strainer Element

995347615
ND19944: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-213-8978
Tube Tee

992138978
PEM3022AW: RNCC: 3 | RNVC: 2
428.100.169: RNCC: 5 | RNVC: 2

18 Jan 2012

4730-99-347-5602
Pipe To Boss Straight Adapter

993475602
SUB3025512: RNCC: 3 | RNVC: 2

17 Oct 2013

4730-99-741-7392
Pipe Tee

997417392
G05152: RNCC: 3 | RNVC: 9
63864AD: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-255-1773
Pipe Plug

992551773
0024173: RNCC: 3 | RNVC: 2
Y105 930 01: RNCC: 5 | RNVC: 2
1203857: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-234-5707
Pipe Union

992345707
11022839: RNCC: 3 | RNVC: 2
2500600885: RNCC: 5 | RNVC: 2

14 Jun 2011

4730-99-724-2877
Union

997242877
81705941: RNCC: 3 | RNVC: 2

21 May 2004

4730-99-739-2454
Pipe To Tube Straight Adapter

997392454
8303843: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-448-7842
F Junction Assembly

4730-99-967-1221
Pipe Elbow

999671221
FV1039220: RNCC: 3 | RNVC: 2
QK0020118: RNCC: 5 | RNVC: 2
E371HC: RNCC: 6 | RNVC: 9

19 Apr 1984

4730-99-968-8485
Pipe Flange

999688485
50050358: RNCC: 3 | RNVC: 2

4 Mar 2013

4730-99-985-9690
Hose Mender

999859690
GS4: RNCC: 3 | RNVC: 2

6 Aug 2013

4730-99-133-6699
Tube Fitting Locknut

991336699
B37324: RNCC: 3 | RNVC: 2

28 Feb 2006

4730-99-667-7215
Swivel Flange To Hose Straight Adapter

996677215
9878521: RNCC: 3 | RNVC: 2

27 Sep 2010

4730-99-668-0231
Pipe Nipple

996680231
11013270: RNCC: 3 | RNVC: 2
2500600861: RNCC: 5 | RNVC: 2

14 Jun 2011

4730-99-574-1396
Fluid-Emulsion Spray Nozzle

995741396
J75129: RNCC: 3 | RNVC: 2
XP98PD01168: RNCC: 6 | RNVC: 9

7 Apr 1998

4730-99-546-2255
Hose Clamp

995462255
961676: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-611-3602
Fitting

4730-99-123-9802

4730-99-103-1921

4730-99-124-3205
Union Nut

4730-99-103-9889

4730-99-103-9938
Hose Nipple

4730-99-606-3122
Pipe To Tube Straight Adapter

996063122
77083191: RNCC: 3 | RNVC: 2
X77083191: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-254-1623
Pipe Elbow

992541623
5031/8U: RNCC: 3 | RNVC: 2
037912: RNCC: 5 | RNVC: 2
ST037912: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-710-7266

4730-99-797-2478
Pipe Flange

997972478
8L9795: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-781-2746
Pipe To Tube Straight Adapter

997812746
153100830: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-405-6032

4730-99-746-8570
Hydraulic System Accessories Manifold

997468570
CBD16059G01: RNCC: 3 | RNVC: 2

24 May 2005

4730-99-746-8847
Pipe To Tube Straight Adapter

997468847
36 0504 05: RNCC: 3 | RNVC: 2
ST49433: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-405-5737

4730-99-603-8575
Fluid Pressure Line Multiple Connector

996038575
B271932: RNCC: 3 | RNVC: 2
B271932: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-837-1139
Pipe Nipple

998371139
18041989: RNCC: 3 | RNVC: 2
2500600059: RNCC: 5 | RNVC: 2

30 Jun 2011

4730-99-917-8628
Nipple

999178628
20496519: RNCC: 3 | RNVC: 2
CV184858: RNCC: 5 | RNVC: 2
VOE20496519: RNCC: 5 | RNVC: 2

8 Apr 2011

4730-99-836-6005
Tube Tee

998366005
4592: RNCC: 3 | RNVC: 2

30 Oct 2009

4730-99-930-0673
Pipe Tee

999300673
B29068: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-915-2424
Self-Sealing Coupling Half

999152424
AVA1150C: RNCC: 3 | RNVC: 2
E34150: RNCC: 5 | RNVC: 2
421672: RNCC: 5 | RNVC: 2
R421672: RNCC: 5 | RNVC: 2
27BA11415: RNCC: 6 | RNVC: 9
36AF949: RNCC: 6 | RNVC: 9
6DK1907: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-832-9909
Sediment Strainer Element

998329909
STRAINER SCREEN STAINLESS STEEL-: RNCC: 3 | RNVC: 1
TT5552134: RNCC: 6 | RNVC: 9

6 Nov 2001

4730-99-833-7458
Hose Clamp

998337458
FV98824: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-920-1639
Connection

999201639
131246090: RNCC: 3 | RNVC: 2

19 Jan 1998

4730-99-836-3164
Pipe Reducer

998363164
41025069: RNCC: 3 | RNVC: 9
K205: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-836-7716
Tube Coupling Inverted Nut

998367716
CL2025: RNCC: 3 | RNVC: 2
709474: RNCC: 5 | RNVC: 2
CL2025FV: RNCC: 5 | RNVC: 2
63T208: RNCC: 5 | RNVC: 2
13H2660: RNCC: 6 | RNVC: 9
7103231: RNCC: 6 | RNVC: 9
6MT9CDRCL2025FY: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-905-8544
Quick Disconnect Coupling Half

999058544
ST10883X168: RNCC: 3 | RNVC: 2
CV174489: RNCC: 5 | RNVC: 2

17 Jan 2012

4730-99-745-7555
Hose Clamp

997457555
A.L.22091.B.: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-726-7995
Hose Clamp

997267995
B53875: RNCC: 1 | RNVC: 2
OCLIPSIZE4.75MM(3)16IN.MILDSTE-: RNCC: 3 | RNVC: 2
856AK1587: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-727-0338
Cup Assembly

997270338
M:T1:75:119: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-727-0347
Shroud Collar Assem

997270347
M:T1:75:121: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-726-5591
Steam Trap

997265591
K 29401: RNCC: 3 | RNVC: 2

31 May 2011

4730-99-780-4570
Coupling

997804570
999 5498: RNCC: 3 | RNVC: 2
RK 60005 S FIGURE 2: RNCC: 5 | RNVC: 2
RK 18009S FIGURE 2: RNCC: 5 | RNVC: 2
RK 18009S FIGURE 2: RNCC: 5 | RNVC: 2
999 5498: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-617-4148
Sediment Strainer Element

996174148
LN29608: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-784-9611
Fluid Flow Restrictor

997849611
1062 T.S.1294: RNCC: 3 | RNVC: 2
SSN01/7800/041/ASSY"D": RNCC: 5 | RNVC: 1
T.S.1294: RNCC: 5 | RNVC: 1
H926-280677: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-319-5126
Quick Disconnect Coupling Half

993195126
HQ06-F-04G: RNCC: 3 | RNVC: 2
90500625: RNCC: 5 | RNVC: 2

8 Dec 2011

4730-99-136-9536
Hose Elbow

991369536
19-6607-4: RNCC: 3 | RNVC: 2
31N20014: RNCC: 6 | RNVC: 9

18 Jan 1977

4730-99-795-0504

4730-99-790-7645
Tube Cross

4730-99-775-5378
Pipe Tee

4730-99-775-8428
Pipe Union

4730-99-780-3794

4730-99-775-5343
Pipe Elbow

4730-99-764-5051
Pipe Coupling

4730-99-795-0502

4730-99-810-1159

4730-99-764-4108

4730-99-200-5647
Pipe Nipple

992005647
DE1023: RNCC: 3 | RNVC: 2
DE1023: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-368-0656
Tee

993680656
87513964: RNCC: 3 | RNVC: 2
TT7777833: RNCC: 6 | RNVC: 9

16 Jan 2002

4730-99-718-5484
Packing Nut

997185484
JPXB80543: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-648-0523
Tube Reducer

996480523
44401: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-659-7980
Socket

996597980
AE18915H: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-422-9379
Pipe To Tube Straight Adapter

994229379
GM28082B: RNCC: 3 | RNVC: 2
4F2104: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-538-8194
Pipe To Tube Straight Adapter

995388194
1028508: RNCC: 3 | RNVC: 2
004450087: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-545-7663
Pipe Expansion Joint

995457663
X01250140003: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-944-0151

4730-99-755-8173
Pipe Plug

4730-99-519-2720
Hose

995192720
ARDM40285: RNCC: 3 | RNVC: 2

25 May 2004

4730-99-404-2298
Adaptor

994042298
2655K696: RNCC: 3 | RNVC: 2
TORNADO 8353: RNCC: 6 | RNVC: 9

27 Aug 2002

4730-99-607-7266
Fluid Passage Bolt

996077266
438938: RNCC: 3 | RNVC: 2
P38938: RNCC: 5 | RNVC: 2

7 Nov 1978

4730-99-613-7686
Pipe Plug

996137686
333/C1578: RNCC: 3 | RNVC: 2

11 Jun 2012

4730-99-205-9706
Pipe Straight Adapter

4730-99-606-0984

4730-99-204-5740
Pipe Straight Adapter

4730-99-348-9449

4730-99-795-6907

4730-99-780-5800
Pi Straight Adaptor

4730-99-540-0579
Pipe Straight Adapter

4730-99-769-6352

4730-99-440-2419

4730-99-794-8722
Pipe Adaptor

4730-99-780-5771

4730-99-774-7333
Pipe Flange

4730-99-773-4156
Pipe Union

4730-99-779-6836
Pipe Straight Adapter

4730-99-781-6362
Tube Coupling

4730-99-775-5437
Compression Sleeve

4730-99-781-1187
Tub Brazing Ferrule

4730-99-775-4915

4730-99-774-3147

4730-99-776-2526
Tube Reducer

4730-99-790-7652
Pipe Cross

4730-99-809-9533

4730-99-800-1749

4730-99-781-3464

4730-99-780-5691
Pipe Tee

4730-99-775-8928

4730-99-781-4391

4730-99-207-8127
Compression Sleeve

992078127
A51612: RNCC: 3 | RNVC: 2
AP04: RNCC: 5 | RNVC: 2

27 Jan 1981

4730-99-749-0372
Sediment Strainer

997490372
32/925556: RNCC: 3 | RNVC: 2

7 Dec 2011

4730-99-254-6049
Straight.Pi Adaptor

992546049
UF50000086: RNCC: 3 | RNVC: 2
Y106 281 10: RNCC: 5 | RNVC: 2

1 Feb 1990

4730-99-827-5192

4730-99-813-2169

4730-99-820-4148

4730-99-820-2765
Pipe Straight Adapter

4730-99-835-9552

4730-99-824-9844

4730-99-829-8156
Pi Straight Adaptor

4730-99-901-7458

4730-99-606-0721

4730-99-780-8965

4730-99-153-5025
Conn Rib 15 Xfeed

991535025
M2825063620000: RNCC: 3 | RNVC: 2

16 Feb 2013

4730-99-639-7315
Pipe Reducer

996397315
NAW883: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-532-5976
Fluid Flow Restrictor

995325976
X77913465: RNCC: 3 | RNVC: 2
77913465: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-500-1569
Pipe Tee Adaptor

995001569
34065301: RNCC: 3 | RNVC: 2
MAK4129: RNCC: 5 | RNVC: 2

7 Nov 1994

4730-99-412-3318
Packing Nut

994123318
GMA2066: RNCC: 3 | RNVC: 2
47094: RNCC: 5 | RNVC: 2
48213: RNCC: 5 | RNVC: 2
53B3148: RNCC: 6 | RNVC: 9
53B3691: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-406-6042
Tube Reducer

994066042
6GHD: RNCC: 3 | RNVC: 1
6GHD: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-338-4264
Conversion Plug

993384264
11499725: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-558-4008
Metal Hose Assembly

4730-99-548-5053
Pipe Flange

4730-99-936-7636
Pipe Plug

999367636
W700081S1309: RNCC: 3 | RNVC: 2

17 Nov 1999

4730-99-480-7483
Sediment Strainer

994807483
AE25791: RNCC: 3 | RNVC: 2

12 Jul 1999

4730-99-152-9393
Connector

991529393
M2825050420100: RNCC: 3 | RNVC: 2

10 Feb 2012

4730-99-467-0133
Pipe Nipple

994670133
ADA137993: RNCC: 3 | RNVC: 2
4FA5913: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-730-0374
Pipe Cross

997300374
50MHD: RNCC: 3 | RNVC: 1

25 Apr 1991

4730-99-730-1153
Rubber Ring

997301153
9008558: RNCC: 3 | RNVC: 2

12 May 2004

4730-99-219-1932
Test Volume Assembly

4730-99-947-0129
Lubricating Nipple

4730-99-451-5220
Tube Reducer

4730-99-465-6431

4730-99-453-1991

4730-99-501-1101
Pipe Tee

4730-99-827-6615

4730-99-350-3245
Pipe Straight Adapter

4730-99-521-2691
Pi Straight Adaptor

995212691
200-1-4-316: RNCC: 3 | RNVC: 2

24 Dec 1976

4730-99-546-5956
Union Nut And Tailp

4730-99-548-1274
Tube Tee

4730-99-540-7817
Pipe Straight Adapter

4730-99-540-7806

4730-99-417-4815

4730-99-710-3564
Fluid Pressure Line Multiple Connector

997103564
V21821: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-051-4442
Quick Disconnect Coupling Half

990514442
SF17741: RNCC: 3 | RNVC: 2

4 Sep 1991

4730-99-529-0795
Union Thread Piece

995290795
11GHD: RNCC: 3 | RNVC: 1
22MMX1INBSP: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-123-3948
Fluid Passage Bolt

991233948
262935: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-448-7231

4730-99-544-9944
Sump Pump Adaptor

995449944
SP00936: RNCC: 3 | RNVC: 2
FL982TF0665: RNCC: 6 | RNVC: 9

3 Feb 1999

4730-99-554-9755
Fluid Flow Restrictor

995549755
1500426900: RNCC: 3 | RNVC: 2
004460678: RNCC: 5 | RNVC: 1
MC42339: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-127-2476
Sediment Strainer Body

991272476
448040107: RNCC: 3 | RNVC: 2
F11.DCX.0002: RNCC: 5 | RNVC: 1
448047107: RNCC: 5 | RNVC: 2

17 Sep 1997

4730-99-613-6254
Pipe Plug

996136254
12018310: RNCC: 3 | RNVC: 2
2500602518: RNCC: 5 | RNVC: 2

27 Jun 2011

4730-99-391-2839
Sediment Strainer

993912839
1002678154: RNCC: 3 | RNVC: 2

11 Jul 2011

4730-99-553-8575
Connector

995538575
M2815039820000: RNCC: 3 | RNVC: 2

11 Apr 2013

4730-99-297-7674
Pipe Plug

992977674
ND40908: RNCC: 3 | RNVC: 2

24 Jan 2007

4730-99-943-9637
Pipe Straight Adapter

4730-99-943-0399
Pipe Tee

4730-99-944-0983
Pipe Elbow Adaptor

4730-99-940-5468
Pipe Reducer

999405468
BSP150HRB065X025316: RNCC: 3 | RNVC: 2

27 Oct 2010

4730-99-712-0851
Pipe Cap

997120851
K13179A: RNCC: 3 | RNVC: 2
36DT1365: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-944-8199
Pipe To Tube Straight Adapter

999448199
AE1M2566299-8: RNCC: 3 | RNVC: 2
M2566299-8: RNCC: 5 | RNVC: 2
M2566299-8: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-757-6268
Blanking Cap

997576268
4-0WE-159025: RNCC: 3 | RNVC: 2

23 Dec 1982

4730-99-464-4718
Lubrication Fitting

994644718
VOE14630785: RNCC: 3 | RNVC: 2
CV194178: RNCC: 5 | RNVC: 2
14630785: RNCC: 5 | RNVC: 2

10 Jun 2013

4730-99-765-6066
Pipe To Boss Straight Adapter

997656066
K38618: RNCC: 3 | RNVC: 2

10 Jun 1994

4730-99-600-1202
Pipe Flange

996001202
6M4PT23: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-728-6095
Banjo Coupling

997286095
34341-403: RNCC: 3 | RNVC: 2
A941: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-710-3576
Fluid Passage Bolt

997103576
VU19201: RNCC: 3 | RNVC: 2
36AD2749: RNCC: 6 | RNVC: 9

16 Oct 1981

4730-99-832-4445

4730-99-123-3703
Fluid Passage Bolt

991233703
3836Y13: RNCC: 3 | RNVC: 2
27Q12780: RNCC: 6 | RNVC: 9

2 Dec 1977

4730-99-204-1734
Fluid Pressure Line Multiple Connector

992041734
1641-4: RNCC: 3 | RNVC: 2
PGT75173: RNCC: 5 | RNVC: 2
E62A2959: RNCC: 5 | RNVC: 2
PG75173: RNCC: 5 | RNVC: 2
S42825: RNCC: 5 | RNVC: 2
462183: RNCC: 5 | RNVC: 2
61FD40206: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-651-1441
Boss Tee

996511441
EAG5592-20-10X10X8: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-051-8541
Non-Metallic Connecting Sleeve

990518541
BA6675-244: RNCC: 3 | RNVC: 2
001298673/244: RNCC: 5 | RNVC: 2
SST.Y.520.00.0035.000/244: RNCC: 5 | RNVC: 2
BA6675 ITEM 244: RNCC: 5 | RNVC: 2

24 Jan 1995

4730-99-915-1087

4730-99-667-8890
Fluid Flow Restrictor

996678890
NO PRIMARY REF 99-667-8890: RNCC: 3 | RNVC: 2
2TC6 31554132 D4220 ITEM 23: RNCC: 5 | RNVC: 2
2TC6 31554132 D4220 ITEM23: RNCC: 5 | RNVC: 9

16 Feb 2011

4730-99-403-7711

4730-99-465-3533

4730-99-460-8183

4730-99-824-5815
Union Nut

4730-99-470-2627

4730-99-520-9106
Pipe Straight Adapter

4730-99-403-8753

4730-99-827-3694

4730-99-957-1744
Pipe Nipple

4730-99-144-4537
Fluid Passage Bolt

4730-99-420-3055
Adaptor

994203055
CH.C.388/1: RNCC: 3 | RNVC: 2
DD 9756: RNCC: 5 | RNVC: 2
CHC 388: RNCC: 5 | RNVC: 2
0254-1573: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-083-2858
Banjo Bolt Assembly

4730-99-083-0350

4730-99-318-1139
Strainer

993181139
FIG1013NW25: RNCC: 3 | RNVC: 1
FIG1013NW25: RNCC: 5 | RNVC: 1

13 Jan 2006

4730-99-554-4064
Pipe Straight Adapter

4730-99-632-2332

4730-99-557-4906

4730-99-550-3267
Pipe Straight Adapter

4730-99-557-9214
Fluid Fl Restrictor

4730-99-460-5915
Fluid Passage Bolt

994605915
X77080894: RNCC: 3 | RNVC: 2
36LL9411: RNCC: 6 | RNVC: 9
77080894: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-894-1522
Pipe Bushing

998941522
95944633: RNCC: 3 | RNVC: 2
CV178141: RNCC: 5 | RNVC: 2
23A7S9Z1: RNCC: 5 | RNVC: 2

20 Dec 2010

4730-99-958-3068
Connector

999583068
FRS110L10: RNCC: 3 | RNVC: 1
FRS110L10: RNCC: 5 | RNVC: 2
AIRWORTHY CERTIFICATED ITEM: RNCC: 6 | RNVC: 9

10 Nov 2008

4730-99-912-8852
Pipe Coupling Half

999128852
AVA55F: RNCC: 3 | RNVC: 2
27BA8752: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-935-3415
Hose Fitting

999353415
T19651: RNCC: 3 | RNVC: 2

21 May 2004

4730-99-882-7247
Pipe Cross

998827247
12015274: RNCC: 3 | RNVC: 2
2500600050: RNCC: 5 | RNVC: 2

27 Jun 2011

4730-99-398-1146
Isolator

993981146
M2815046920100: RNCC: 3 | RNVC: 2

11 Apr 2013

4730-99-957-8555
Union Nut

999578555
VGS6566-C: RNCC: 3 | RNVC: 2
26VC21919: RNCC: 6 | RNVC: 9

2 May 2002

4730-99-763-6186
Tube Elbow

997636186
W 6-S: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-136-0839
Hose Elbow

991360839
13-6607-3: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-588-1945
Male Connector

995881945
8-12-FUS: RNCC: 3 | RNVC: 2

25 Apr 1995

4730-99-581-6314
Pipe Elbow

995816314
HD1454-8: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-366-6122
Pipe Reducer

993666122
T12: RNCC: 3 | RNVC: 9
428.100.455: RNCC: 5 | RNVC: 2

18 Jan 2012

4730-99-538-2656
Pipe To Tube Straight Adapter

995382656
SF061CP047: RNCC: 3 | RNVC: 2
QCASF061CP047: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-611-8220
Adaptor

996118220
834713: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-549-3592
Body Union

995493592
77024625: RNCC: 3 | RNVC: 2

24 Jul 1995

4730-99-536-1925
Fluid Passage Bolt

995361925
NM63817: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-441-1102

4730-99-643-6326

4730-99-520-9172
Pipe Straight Adapter

4730-99-527-4108

4730-99-528-0617

4730-99-781-5118
Pipe Tee

997815118
130: RNCC: 3 | RNVC: 1
14823: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-796-5998
Tube Fitting Clinch Sleeve

997965998
967558: RNCC: 3 | RNVC: 2
944717: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-737-3632
Pipe Coupling

997373632
D08010549: RNCC: 3 | RNVC: 2

17 Nov 2010

4730-99-635-0469
Hose Clamp

996350469
22H: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-528-0439
Sediment Strainer Element

995280439
099080108: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-109-8298
Flange To Boss Elbow

991098298
FJR1052: RNCC: 3 | RNVC: 2

3 Oct 1991

4730-99-206-2598

4730-99-543-2459

4730-99-420-3195
Pipe To Tube Straight Adapter

994203195
S25969B: RNCC: 3 | RNVC: 2
0254-17670: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-060-4153
Concentric Reducer

4730-99-147-0555

4730-99-144-7090

4730-99-216-9659
Tube Union

992169659
BA-BJ08MSS: RNCC: 3 | RNVC: 2

17 Apr 2010

4730-99-633-2170
Pipe Reducer

996332170
M41429S: RNCC: 3 | RNVC: 2
B54614: RNCC: 5 | RNVC: 2
8745274: RNCC: 5 | RNVC: 2
M41429: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-544-0365
Pipe Plug

995440365
P16H: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-243-0007
Bush

992430007
14028637: RNCC: 3 | RNVC: 2
TT7777773: RNCC: 6 | RNVC: 9

14 Jan 2002

4730-99-430-5339
Pipe To Hose Straight Adapter

994305339
FV 2096899: RNCC: 3 | RNVC: 2
FV 2096899: RNCC: 5 | RNVC: 2

28 Aug 1991

4730-99-534-9886
Pipe To Tube Straight Adapter

995349886
NM63687: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-756-8865
Tube Reducer

997568865
T4441-P-405: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-535-1183
Tube Fitting Brazing Ferrule

995351183
C81017 PART 6: RNCC: 3 | RNVC: 2
C81017-6: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-532-5366
Tube Fitting Brazing Ferrule

995325366
SSN09/Y/524/619: RNCC: 3 | RNVC: 2
Y/524/619: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-732-9090
Pipe To Tube Straight Adapter

997329090
1066/F.W. 220: RNCC: 3 | RNVC: 2
F.W. 220: RNCC: 5 | RNVC: 1
H926-360777: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-304-5391
Hose Clamp

993045391
3134R: RNCC: 3 | RNVC: 2
50/71046: RNCC: 5 | RNVC: 2
60/71046: RNCC: 6 | RNVC: 9
D/5/31/322/1: RNCC: 6 | RNVC: 9

27 Sep 1995

4730-99-254-9742
Self-Sealing Coupling Assembly

992549742
697/7/01573/000: RNCC: 3 | RNVC: 1
M005A0367-00: RNCC: 5 | RNVC: 1
HTE772-19-P-1 1/2"BSP: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-556-7845
Pipe Expansion Joint

995567845
AR8121-75EXPC: RNCC: 3 | RNVC: 2
X0125-1C35-1-3-112: RNCC: 5 | RNVC: 2
X125-1C35-1-3-112: RNCC: 5 | RNVC: 2
AR8121-75EXPC: RNCC: 5 | RNVC: 9
X0125-1C35-1-3-112: RNCC: 5 | RNVC: 9
X125-1C35-1-3-112: RNCC: 5 | RNVC: 9
H150-459865: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-720-3318
Pipe Elbow Adaptor

997203318
1076/B.S. 91: RNCC: 3 | RNVC: 2
B.S. 91: RNCC: 5 | RNVC: 1
H926-386663: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-784-2864
Pipe Flange

997842864
BN.256 LINE 1: RNCC: 3 | RNVC: 2
SSBN.01/502/802: RNCC: 5 | RNVC: 1
1074BN.256 LINE 1: RNCC: 5 | RNVC: 2
H926-272914: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-564-2818
Tube Coupling Nut

995642818
HFT-003600: RNCC: 3 | RNVC: 2
FL9635N0001: RNCC: 6 | RNVC: 9

26 Mar 1996

4730-99-772-2945
Sediment Strainer Element

997722945
200914: RNCC: 3 | RNVC: 2
TIS 7.402: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-732-8440
Blind Tailpiece

997328440
0E-B-5953: RNCC: 3 | RNVC: 2

11 Jul 1986

4730-99-241-7616
Tube Coupling Nut

992417616
FM06L71: RNCC: 3 | RNVC: 2
40004737: RNCC: 5 | RNVC: 2

17 Aug 2011

4730-99-557-8527

4730-99-551-0315
Pipe Elbow

4730-99-550-3587
Tube Cross

4730-99-718-1482
Flange To Pipe Tee

4730-99-848-0137

4730-99-213-9128
Tube Cross

992139128
428.100.416: RNCC: 3 | RNVC: 2

25 Jan 2012

4730-99-365-4433
Quick Disconnect Coupling Half

993654433
MFM1312NPT: RNCC: 3 | RNVC: 2

27 Aug 2002

4730-99-865-7058
Tube Cross

998657058
FV 524989: RNCC: 3 | RNVC: 2
LV9ACRFV524989: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-836-8032
Tube Nipple

998368032
APSA755FV: RNCC: 3 | RNVC: 1
16L38366: RNCC: 6 | RNVC: 9
LV6MT9CDRAPSA755FV: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-930-0668
Straight Connector

999300668
MEXE25907: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-836-6537
Pipe Nipple

998366537
AP4395FV: RNCC: 3 | RNVC: 1
AP4395: RNCC: 5 | RNVC: 1
FV108643: RNCC: 5 | RNVC: 2
931424: RNCC: 5 | RNVC: 2
16L36925: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-945-2229
Hose Coupling

999452229
16-21219: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-836-0635
Pipe Coupling

998360635
CAL6588: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-836-3478
Pipe Plug

998363478
951715: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-874-8874
Pipe Flange

998748874
020047523: RNCC: 3 | RNVC: 2

4 Feb 2004

4730-99-922-3988
Union

999223988
M4715001520100: RNCC: 3 | RNVC: 2

10 Nov 2011

4730-99-865-6839
Tube Nipple

998656839
FV 538130: RNCC: 3 | RNVC: 2
LV9ACRFV538130: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-836-3098
Pipe To Tube Straight Adapter

998363098
34 0347 26: RNCC: 3 | RNVC: 2
939343: RNCC: 5 | RNVC: 2
Z161DS: RNCC: 5 | RNVC: 2
939 402 08: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-865-6206
Tube Nipple

998656206
FV 500112: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-542-5477
Union Nut

995425477
VG68703: RNCC: 3 | RNVC: 2
127484: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-123-4608

4730-99-123-5156

4730-99-123-4026

4730-99-587-3828
Rising Main

995873828
I1Y3S: RNCC: 3 | RNVC: 2

7 Dec 2010

4730-99-813-6488
Pi Straight Adaptor

998136488
FV701083: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-850-0282
Union Nut

998500282
236407: RNCC: 3 | RNVC: 2
LV7RU236407: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-814-4352
Hose Clamp

998144352
8149651: RNCC: 3 | RNVC: 2
CV184982: RNCC: 5 | RNVC: 2
VOE8149651: RNCC: 5 | RNVC: 2

12 Apr 2011

4730-99-125-4761
Elbow

991254761
92395433: RNCC: 3 | RNVC: 2
4C3TX-S: RNCC: 6 | RNVC: 9

11 Jul 1991

4730-99-420-3210
Pipe Nipple

994203210
1: RNCC: 3 | RNVC: 1
0254-254004: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-801-1991
Pip Equal Tee Piece

998011991
FVS103-5: RNCC: 3 | RNVC: 2
LV6MT193667: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-801-0904
Pipe Plug

998010904
SMMT11: RNCC: 3 | RNVC: 1
4WC: RNCC: 3 | RNVC: 2
S223-4: RNCC: 5 | RNVC: 2
S223-4: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-839-8189
Pipe To Hose Elbow

998398189
3005177: RNCC: 3 | RNVC: 2
B32061-4: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-801-1265
Lubrication Fitting Adapter

998011265
NG6359: RNCC: 3 | RNVC: 2
DEFSTAN47-7: RNCC: 6 | RNVC: 9
LV6MT1TTNG6359: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-532-7419
Pipe To Tube Straight Adapter

995327419
2MHD: RNCC: 3 | RNVC: 1

25 Apr 1991

4730-99-999-5990

4730-99-999-5149

4730-99-671-5228
Manifold Blank

996715228
020058783: RNCC: 3 | RNVC: 2

9 Jan 2004

4730-99-151-9108
Quick Disconnect Coupling Half

991519108
332/E4161: RNCC: 3 | RNVC: 2

15 Dec 2010

4730-99-544-3977
Sediment Strainer Body

995443977
401250113: RNCC: 3 | RNVC: 1

25 Apr 1991

4730-99-102-2099
Fluid Pressure Line Multiple Connector

991022099
VU3424: RNCC: 3 | RNVC: 2
VU3424: RNCC: 5 | RNVC: 2
36AD1937: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-299-9826
Flange To Pipe Elbow

992999826
375 5507: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-740-7408
Hose Tee

997407408
6794010: RNCC: 3 | RNVC: 2
MUC4865: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-824-7093
Heater Valv Adaptor

998247093
594622: RNCC: 3 | RNVC: 2
594622: RNCC: 5 | RNVC: 2
594622: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-375-5848
Soil Pipe Lateral

993755848
ST404B: RNCC: 3 | RNVC: 2
79412696: RNCC: 5 | RNVC: 2
2500600705: RNCC: 5 | RNVC: 2

23 Nov 2011

4730-99-738-4698
Fluid Passage Bolt

997384698
BM36875: RNCC: 3 | RNVC: 2

15 Sep 1987

4730-99-742-9199
Fluid Passage Bolt

997429199
33557119: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-741-5736
Fluid Passage Bolt

997415736
FV 2057539: RNCC: 3 | RNVC: 2

8 Sep 1987

4730-99-744-5733
Pipe

997445733
140481: RNCC: 3 | RNVC: 2

6 Oct 2006

4730-99-823-6412
Bleed Valve Adaptor

998236412
FV 758855: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-443-0967
Banjo Fitting

994430967
441010R1: RNCC: 3 | RNVC: 2
4CA2851: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-719-4368
Valve Stop

997194368
HTE751G1: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-253-8868
Union Thread Piece

992538868
11 GHD: RNCC: 3 | RNVC: 1
11GHD 42MM: RNCC: 5 | RNVC: 2
NAVY RECON QUERY 0228: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-313-4448
Hose

993134448
82000889: RNCC: 3 | RNVC: 2

14 May 2004

4730-99-145-4002
Sediment Strainer Element

991454002
563626: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-477-2523
Pipe Straight Adapter

4730-99-110-8828
Tube Nipple

991108828
KU10804: RNCC: 3 | RNVC: 2
36SN2556: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-508-2536
Adaptor Assembly

995082536
A4/7300: RNCC: 3 | RNVC: 2
7300: RNCC: 5 | RNVC: 2
DC IPT/DLOCV/CM1/2/156: RNCC: 6 | RNVC: 9

24 Sep 2002

4730-99-196-7871
Flanged Socket

991967871
S73/50 101 2301: RNCC: 3 | RNVC: 2
101 2301: RNCC: 5 | RNVC: 1
53060.51: RNCC: 5 | RNVC: 2
563/1/5: RNCC: 6 | RNVC: 9

8 Feb 1994

4730-99-529-3312
Tube Reducer

995293312
1RMHD: RNCC: 3 | RNVC: 1
004501678: RNCC: 5 | RNVC: 1
MCM/352/01/001: RNCC: 5 | RNVC: 1
1RMHD 8 MM X 6 MM: RNCC: 5 | RNVC: 2
004501678 ITEM 41: RNCC: 5 | RNVC: 2
MCM/352/01/001/41: RNCC: 5 | RNVC: 2
MCM/352/01/001ITEM 41: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-838-5874
Pipe Reducer

998385874
A08BM08BM: RNCC: 3 | RNVC: 2
ND8661: RNCC: 5 | RNVC: 2
325-71176: RNCC: 5 | RNVC: 2

16 Jul 1993

4730-99-551-3237
Filter

995513237
562392/A: RNCC: 3 | RNVC: 2
562392 ITEM 10: RNCC: 5 | RNVC: 2
562392/10: RNCC: 5 | RNVC: 2

2 Nov 2005

4730-99-548-3165
Pipe Boss

995483165
MCM/358/02/001/15: RNCC: 3 | RNVC: 2
004501844: RNCC: 5 | RNVC: 1
M.C.M./358/02/001: RNCC: 5 | RNVC: 1
004501844 ITEM 15: RNCC: 5 | RNVC: 2
004501849: RNCC: 5 | RNVC: 2
M.C.M./358/02/001 ITEM 15: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-532-0333
Bulkhea Penetration

995320333
SSN.08/Y/167/074/750: RNCC: 3 | RNVC: 2
00117442: RNCC: 5 | RNVC: 1
Y/167/074/750: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-183-3464

4730-99-793-3948
Self-Sealing Coupling Half

997933948
HTE8934-M: RNCC: 3 | RNVC: 2
HTE8934M: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-835-8825
Tube Fitting Brazing Ferrule

998358825
130-42: RNCC: 3 | RNVC: 2
LV7FW130-42: RNCC: 6 | RNVC: 9
61AE11676: RNCC: 6 | RNVC: 9
61AE40697: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-149-3621
Pipe To Tube Straight Adapter

991493621
110085-1685: RNCC: 3 | RNVC: 2
110085/1685: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-902-1549
Stop End

999021549
NO PRIMARY REF 99-902-1549: RNCC: 3 | RNVC: 2
60HD3 8IN: RNCC: 5 | RNVC: 2
F305-265187: RNCC: 6 | RNVC: 9

30 Nov 2001

4730-99-177-3398
Sub-Plate Set

991773398
H53003001: RNCC: 3 | RNVC: 1
QCA/H53003001: RNCC: 5 | RNVC: 2
15130145: RNCC: 5 | RNVC: 2

27 Sep 2005

4730-99-545-2082
Double-Ended Union

995452082
B61-63021: RNCC: 3 | RNVC: 2
61-63021: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-664-9556
Pipe To Tube Straight Adapter

996649556
110087-897: RNCC: 3 | RNVC: 2
110087/897: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-255-4333
Connector

992554333
SS400-1-4ST: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-444-8298
Coupling

994448298
NO PRIMARY REF 99-444-8298: RNCC: 3 | RNVC: 2
B30682: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-270-8447
Tube Elbow

992708447
79901013: RNCC: 3 | RNVC: 2
FT550611: RNCC: 5 | RNVC: 2
2500600597: RNCC: 5 | RNVC: 2

16 Sep 2011

4730-99-595-4382
Rigid Tube

995954382
5156991: RNCC: 3 | RNVC: 2

13 May 2004

4730-99-463-6142
Tube Tee

994636142
901706: RNCC: 3 | RNVC: 2

12 Jul 1996

4730-99-209-9762
Nut And Cone Shank

992099762
46374: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-096-3077
Sediment Strainer

990963077
L20008: RNCC: 3 | RNVC: 2

13 May 1993

4730-99-728-7783
Pipe Tee

997287783
CU28: RNCC: 3 | RNVC: 1
CC264611-5: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-147-4800
Pipe Union

991474800
04352499: RNCC: 3 | RNVC: 2

29 Jun 2001

4730-99-206-2529
Hose Cap

992062529
BLANKCAPF1G13: RNCC: 3 | RNVC: 1
BLANKCAPF1G13: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-349-5805
Pipe Plug

993495805
42227207: RNCC: 3 | RNVC: 2

23 Aug 2006

4730-99-528-7616
Pipe Plug

995287616
H22-0420: RNCC: 3 | RNVC: 1

25 Apr 1991

4730-99-021-8687
Pipe Elbow Adaptor

990218687
EU46888: RNCC: 3 | RNVC: 2

22 Nov 1991

4730-99-426-4126
Connector

994264126
M2825010120100: RNCC: 3 | RNVC: 2

20 Nov 2010

4730-99-970-5587

4730-99-970-4927

4730-99-750-0765
Connector

997500765
M2825049320000: RNCC: 3 | RNVC: 2

11 May 2013

4730-99-736-9733
Pipe Flange

997369733
AS33544: RNCC: 3 | RNVC: 2

25 Apr 1991

Load More Results