What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Pipe Bend?

A Return Pipe Bend (BEND,PIPE,RETURN) is a fitting designed to join a pipe in a parallel position to another pipe for reversing the flow of gas, steam, air, or liquids. Excludes BEND, SOIL PIPE.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Soil Pipe Reducer?

A Soil Pipe Reducer (REDUCER,SOIL PIPE) is a straight fitting with the spigot end larger than the hub end. It is used to connect two pieces of soil pipe of different size.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Pipe Lateral?

A Pipe Lateral (LATERAL,PIPE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit pipes and/or pipe fittings to be taken off laterally from the main line. It may have side inlet(s).

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Soil Pipe Lateral?

A Soil Pipe Lateral (LATERAL,SOIL PIPE) is a fitting having one or two branches which are fixed at various angles other than 90 degrees to the run. If item has two branches, they will be located on opposite sides of the run (180 degrees apart) and will be identical. It may have side inlets.

What is a Soil Pipe Tee?

A Soil Pipe Tee (TEE,SOIL PIPE) is a fitting consisting of a run and a branch. The branch may be either curved or straight, but the axis of the end connection intersects the axis of the run at right angles. It may have side inlets.

What is a Tube Coupling Inverted Nut?

A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.

What is a Tube Coupling Nut?

A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.

What is an Union Tailpiece?

An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.

What is an Union Thread Piece?

An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - United Kingdom (UK)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by United Kingdom (UK) - NCB is 99

Page 126 of 242

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by United Kingdom

47	30	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - United Kingdom (UK)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 43 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 608 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 26 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 14 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 16 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
What is a Bulkhead Hose Connector? 44 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 123 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 192 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 30 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Cap? 97 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 18 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 1095 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 322 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 1326 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 970 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 64 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Pipe To Hose Straight Adapter? 986 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 8242 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 197 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Pipe Bushing? 294 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Hose Nipple? 57 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 1594 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 953 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 86 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 586 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Tube Union? 47 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 172 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Pipe Bend? 11 Items: A Return Pipe Bend (BEND,PIPE,RETURN) is a fitting designed to join a pipe in a parallel position to another pipe for reversing the flow of gas, steam, air, or liquids. Excludes BEND, SOIL PIPE.
What is a Return Tube Bend? 18 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 33 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 131 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Soil Pipe Reducer? 28 Items: A Soil Pipe Reducer (REDUCER,SOIL PIPE) is a straight fitting with the spigot end larger than the hub end. It is used to connect two pieces of soil pipe of different size.
What is a Pipe Flange? 1150 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Machine Thread Plug? 108 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Pipe Lateral? 30 Items: A Pipe Lateral (LATERAL,PIPE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit pipes and/or pipe fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Tube Lateral? 16 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 122 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 2442 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 18 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 312 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Tube Tee? 892 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Soil Pipe Lateral? 30 Items: A Soil Pipe Lateral (LATERAL,SOIL PIPE) is a fitting having one or two branches which are fixed at various angles other than 90 degrees to the run. If item has two branches, they will be located on opposite sides of the run (180 degrees apart) and will be identical. It may have side inlets.
What is a Soil Pipe Tee? 10 Items: A Soil Pipe Tee (TEE,SOIL PIPE) is a fitting consisting of a run and a branch. The branch may be either curved or straight, but the axis of the end connection intersects the axis of the run at right angles. It may have side inlets.
What is a Tube Coupling Inverted Nut? 365 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Tube Coupling Nut? 113 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is an Union Tailpiece? 217 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 61 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Pipe Swivel Joint? 56 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 525 Items
What is a Sediment Strainer? 692 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 24 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 54 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 16 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 228 Items
What is a Pipe Repair Clamp? 51 Items: A Pipe Repair Clamp (CLAMP,REPAIR,PIPE) is a one-piece or two-piece metal clamp generally used with gasket(s) and designed to repair longitudinal splits and pit holes and/or to support thin walls in a straight run of pipe. See also CLAMP, LEAK REPAIR, PIPE COUPLING.
What is a Pipe Cap? 247 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 238 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 14 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 1072 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 1811 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 551 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
What is a Hose Reducer? 41 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 2097 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 1319 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Pipe Cross? 115 Items: A Pipe Cross (CROSS,PIPE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is designed to be used as a junction at the intersection of pipe and/or pipe fittings.
What is a Pipe To Tube Cross? 58 Items: A Pipe To Tube Cross (CROSS,PIPE TO TUBE) is a fitting having four branches in the same plane whose axes form right angles. One or more of the connections have standard pipe threads or are unthreaded and designed to accommodate a pipe. The remaining connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It may have side inlet(s).
What is a Tube Cross? 86 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Spool Piece? 28 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Water Closet Bend? 10 Items: A Water Closet Bend (BEND,WATER CLOSET) is a waste line fitting designed for use with a water closet, to provide a means of connecting a water closet bowl to a waste line.
What is a Pipe Locknut? 74 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 21 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Drainage Pipe Lateral? 23 Items: A Drainage Pipe Lateral (LATERAL,DRAINAGE PIPE) is a fitting having one or two branches which are fixed at various angles other than 90 degrees (1.5705 radians) to the run. It is used as a junction at the intersection of a drainage line and is provided with a shoulder(s) at the end(s) of its internal threaded or unthreaded portion, conforming to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It may have side inlet(s).
What is a Hose Clamp? 1782 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is a Fuel Feeder Manifold? 10 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Soil Pipe Plug? 10 Items: A Soil Pipe Plug (PLUG,SOIL PIPE) is a fitting designed to fit into the hub end of soil pipe or a soil pipe fitting for sealing.
What is a Pipe Clamp Coupling? 59 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is an Air Line Manifold? 48 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 17 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 153 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 186 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 570 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 70 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 522 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 24 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 565 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Elbow Assembly? 11 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Fluid Flow Restrictor? 857 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 36 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Self-Sealing Coupling Half? 218 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 11 Items
What is a Drainage Pipe Elbow? 29 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Pipe True Wye? 40 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 20 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 24 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Sediment Strainer Element? 1052 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 1394 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 1435 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1839 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 139 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is an Union Nut? 1395 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Quick Disconnect Coupling Assembly? 63 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 63 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 20 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Magnetic Pipe Plug? 43 Items: A Magnetic Pipe Plug (PLUG,PIPE,MAGNETIC) is a pipe fitting primarily designed for installation in a lubrication or hydraulic system. It has an integral magnet in the body and external pipe threads.
What is a Hose To Boss Straight Adapter? 51 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 242 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 473 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 37 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 13 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Pipe To Boss Elbow? 20 Items: A Pipe To Boss Elbow (ELBOW,PIPE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a pipe or pipe fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like. See also ELBOW, PIPE; and ELBOW, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Boss Elbow? 66 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 44 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Pipe To Boss Tee? 10 Items: A Pipe To Boss Tee (TEE,PIPE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a pipe or pipe fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Tube To Boss Tee? 35 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 59 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Boss Nipple? 29 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Pipe Outlet? 23 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 23 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 26 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Hose Straight Adapter? 110 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 86 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 57 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Flange Elbow? 169 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 11 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 18 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Pipe Elbow? 65 Items: A Flange To Pipe Elbow (ELBOW,FLANGE TO PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 118 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Flange Tee? 38 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Soil Pipe Coupling? 21 Items: A Soil Pipe Coupling (COUPLING,SOIL PIPE) is a straight fitting used to connect two pieces of soil pipe of the same size.
What is a Quick Disconnect Plug? 17 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Suction Strainer? 51 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Coupling Swage Ferrule? 19 Items: A Tube Coupling Swage Ferrule (FERRULE,SWAGE,TUBE COUPLING) is a flanged cylindrical metallic item used with a plain end tube and swaged in place. It is designed to be used as a component part of a flexible or rigid tube coupling.
What is a Tube Fitting Insert? 10 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Fluid-Emulsion Spray Nozzle? 46 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 10 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 12 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 11 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Quick-Disconnect Nipple? 12 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is an Exhaust-Intake Pneumatic Muffler? 23 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Flange To Flange Straight Adapter? 29 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
Connector,Tubing,Straight 28 Items
What is a Hydraulic Manifold Assembly? 264 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Tube Swivel Joint? 20 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
Adapter,Check Valve 11 Items
Nipple,Special 34 Items
Adapter Assembly,Valve 18 Items
Adapter And Flange Assembly 17 Items
What is a Tube Coupling Assembly? 18 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 65 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Special-Shaped Hose Clamp? 15 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Pipe To Tube Swivel Joint? 21 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Tube Fitting Compression Ferrule? 60 Items: A Tube Fitting Compression Ferrule (FERRULE,COMPRESSION,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be slipped over tubing. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled, the joint seals at the seat in a manner similar to a seat type union.
What is a Pipe Fitting Flared Collar? 39 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 590 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 63 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 53 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Hydraulic Swivel Joint? 54 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 209 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.

Stock Items From Supply Class 4730 Page 126 of 242

4730-99-202-1404

4730-99-541-1065
Pipe To Tee Adaptor

4730-99-205-5883

4730-99-214-7269
Pipe Fitting

4730-99-206-0099

4730-99-540-0800
Pipe Straight Adapter

4730-99-204-8870
Pipe Straight Adapter

4730-99-539-2794
Tub Brazing Ferrule

4730-99-540-5318
Filler Plug

4730-99-540-9950
Fluid Fl Restrictor

4730-99-561-0002
Packing Nut

4730-99-561-8496

4730-99-625-7618
Adaptor

4730-99-633-2053
Pipe To Tube Elbow

4730-99-629-9258
Pipe Straight Adapter

4730-99-629-9975

4730-99-633-4321

4730-99-321-5596
Pipe Elbow

993215596
95 4600 20: RNCC: 3 | RNVC: 2
RAK2122: RNCC: 5 | RNVC: 2

16 Mar 1994

4730-99-431-2588
Fluid Pressure Line Multiple Connector

994312588
DE3774: RNCC: 3 | RNVC: 2
X3XCREDE3774: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-087-1653
Sediment Strainer

990871653
0205393: RNCC: 3 | RNVC: 2

27 May 1997

4730-99-901-7520

4730-99-842-4009

4730-99-564-8666
Steam Trap

995648666
1215599: RNCC: 3 | RNVC: 2
BPT21: RNCC: 5 | RNVC: 1

8 Jul 1993

4730-99-326-2962
Union

993262962
M4715006320100: RNCC: 3 | RNVC: 2

10 Nov 2011

4730-99-550-7510
Sediment Strainer

995507510
4433: RNCC: 3 | RNVC: 9

25 Apr 1991

4730-99-328-4368
Pipe Nipple

993284368
64S5833: RNCC: 3 | RNVC: 2
26DL12445: RNCC: 6 | RNVC: 9

3 May 2002

4730-99-837-7710
Pipe Plug

998377710
3272A032: RNCC: 3 | RNVC: 2

20 Dec 2012

4730-99-530-1864
Pipe Tee

995301864
EFT6: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-808-9949
Tube-Hose Fitting Compression Sleeve

998089949
Z48620: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-831-4848
Check Valve Body

998314848
PGQ705412: RNCC: 3 | RNVC: 2
PG705412: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-808-1412
Oil Elbow Connector

998081412
FV454533: RNCC: 3 | RNVC: 2
CK3637: RNCC: 5 | RNVC: 2

5 Sep 1979

4730-99-824-3622
Panel Pillar

998243622
FV 738160: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-807-6115
Fluid Passage Bolt

998076115
P82858: RNCC: 3 | RNVC: 2
0D17341: RNCC: 5 | RNVC: 2
LV6MT12SSP82858: RNCC: 5 | RNVC: 2
6MT12SSP8285: RNCC: 6 | RNVC: 9
82858: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-829-8673
Pipe Coupling

998298673
9134428: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-824-1300
Fluid Passage Bolt

998241300
FV 664433: RNCC: 3 | RNVC: 2

1 Mar 1977

4730-99-824-3677
Fluid Pre Connector

998243677
FV737526: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-827-8799
Pipe To Tube Straight Adapter

998278799
FV858180: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-829-7246
Pi Straight Adapter

998297246
BW49481: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-824-5877
Pipe Plug

998245877
87709S: RNCC: 3 | RNVC: 2
1759053: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-808-2248
Multiple Connector

998082248
64474287: RNCC: 3 | RNVC: 2
AS31274: RNCC: 5 | RNVC: 2
620345: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-827-1462
Fluid Passage Bolt

998271462
7008A188C: RNCC: 3 | RNVC: 2
Y7008A188C: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-828-0141
Ducting Elbow

998280141
FV 871606: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-826-9901
Flange Elbow

998269901
FV936282: RNCC: 3 | RNVC: 2

16 Jul 1984

4730-99-828-7383
Pipe To Tube Straight Adapter

998287383
X88250655: RNCC: 3 | RNVC: 2
FV738750: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-828-5581
Fluid Pressure Line Multiple Connector

998285581
FV872257: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-829-8324
Hose Clamp

998298324
35580: RNCC: 3 | RNVC: 2
91020405: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-826-9362
Sediment Strainer

998269362
FV951001: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-831-5369
Lubrication Fitting

998315369
NB7402: RNCC: 3 | RNVC: 2

28 Oct 1992

4730-99-831-0657
Pipe Reducer

998310657
94450448: RNCC: 3 | RNVC: 2
ACU9426: RNCC: 5 | RNVC: 2

12 Jun 1992

4730-99-728-0903
Air Trap

997280903
26317: RNCC: 3 | RNVC: 2
46747: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-738-2320
Pipe Nut

997382320
AFU1863: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-752-1630
Pipe To Tube Straight Adapter

997521630
843131: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-828-7864
Magnetic Pipe Plug

998287864
9378135: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-112-5767
Pipe Straight Adapter

4730-99-887-6868
Banjo Bolt

4730-99-205-8978
Tube Clinch Sleeve

4730-99-102-8505

4730-99-123-3680

4730-99-126-2958
Stud Coupling

4730-99-470-2251
Multiple Connector

4730-99-520-8937
Casing Plug

4730-99-741-5742
Pipe To Tube Straight Adapter

997415742
FV 837318: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-320-0692
Pipe Tee

993200692
ASME B16.9 TABLE A6 SCHEDULE 40: RNCC: 3 | RNVC: 1
ASME B16.9: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-365-5296
Conn Rib 8 Dispense

993655296
M2825048720000: RNCC: 3 | RNVC: 2

15 Mar 2012

4730-99-836-3264
Pipe Elbow Adaptor

998363264
553913: RNCC: 3 | RNVC: 9

25 Apr 1991

4730-99-738-3161
Pipe Elbow

4730-99-455-3850

4730-99-212-6826
Oil Plug

992126826
81706641: RNCC: 3 | RNVC: 2

21 May 2004

4730-99-425-7951
Hose Clamp

994257951
11305835: RNCC: 3 | RNVC: 2
CV182791: RNCC: 5 | RNVC: 2
VOE11305835: RNCC: 5 | RNVC: 2

12 Apr 2011

4730-99-438-4747
Packing Nut

994384747
FRS229F: RNCC: 3 | RNVC: 2
27FR3529: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-942-7640
Pipe Tee

999427640
36051403: RNCC: 3 | RNVC: 2
CK960420: RNCC: 5 | RNVC: 2
K514/5: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-439-7161
Tube Fitting Brazing Ferrule

994397161
130-29: RNCC: 3 | RNVC: 2
61AE40696: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-399-1104
Hose Clamp

993991104
EN4234M035-RA: RNCC: 2 | RNVC: 2

27 Apr 2001

4730-99-603-6133
Pipe Tee

996036133
A271962: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-104-2930
Union Nut

991042930
N032D: RNCC: 3 | RNVC: 2
26NA9361: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-628-6190
Self-Sealing Coupling Half

996286190
812323: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-258-0338
Elbow Adaptor

992580338
94 4330 12: RNCC: 3 | RNVC: 2
1203252: RNCC: 5 | RNVC: 2
FL963KZ0001: RNCC: 6 | RNVC: 9

19 Nov 1996

4730-99-539-5469
Hose Clamp

995395469
SP14444-9: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-810-2748
Pipe Straight Adapter

4730-99-330-1663
Adaptor

993301663
168-2-4: RNCC: 3 | RNVC: 2

7 Jun 1994

4730-99-433-4175
Tube To Boss Straight Adapter

994334175
8-4HMTXSS: RNCC: 3 | RNVC: 2

25 Jan 2008

4730-99-386-7529
Pipe Ferrule

993867529
1023/76.7: RNCC: 3 | RNVC: 2
1023/76.7: RNCC: 5 | RNVC: 2
WE122C1B: RNCC: 6 | RNVC: 9

22 Jan 1996

4730-99-440-9760
Reducing Union

994409760
15077-2: RNCC: 3 | RNVC: 2
15077-2: RNCC: 6 | RNVC: 9
4GA6754: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-201-2790
Pipe To Tube Straight Adapter

992012790
S2231S: RNCC: 3 | RNVC: 2
8322PT82: RNCC: 5 | RNVC: 2
8322PT16-8: RNCC: 5 | RNVC: 2
16B7808: RNCC: 6 | RNVC: 9
ET000780: RNCC: 6 | RNVC: 9
LV6MT1BE0S2231S: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-315-8746
Connector

993158746
M2825027800000: RNCC: 3 | RNVC: 2

10 Feb 2012

4730-99-733-2948
Elbow

997332948
CV2880: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-234-1817
Pipe Tee

992341817
110087-375: RNCC: 3 | RNVC: 2
110087-375: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-204-2451
S Strainer Assembly

992042451
F07445: RNCC: 3 | RNVC: 2
7445F: RNCC: 5 | RNVC: 2

11 Dec 1989

4730-99-051-7298
Pipe Plug

990517298
4.235.898: RNCC: 3 | RNVC: 2

12 Nov 1993

4730-99-851-7910
L Coupling Assembly

4730-99-812-0527
Valve Adapter Assembly

998120527
2984301: RNCC: 3 | RNVC: 2
29843: RNCC: 5 | RNVC: 2
H-R730: RNCC: 6 | RNVC: 9

16 Apr 1998

4730-99-831-4134
Steam Trap Parts Kit

998314134
0671082: RNCC: 3 | RNVC: 2
TIS 2.004: RNCC: 5 | RNVC: 1
TIS 2.004 ITEM H: RNCC: 5 | RNVC: 1

13 Dec 1993

4730-99-149-3691
Non-Metallic Connecting Sleeve

991493691
110004-7579: RNCC: 3 | RNVC: 2
110004-7579: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-282-6675
Pipe Nipple

992826675
1B/8: RNCC: 3 | RNVC: 2

23 May 1992

4730-99-144-8304

4730-99-134-7644

4730-99-643-6991
Fluid Passage Bolt

4730-99-200-2944

4730-99-553-8581
Connector

995538581
M2815010720100: RNCC: 3 | RNVC: 2

11 Apr 2013

4730-99-100-6381

4730-99-610-2761

4730-99-952-7007
Pipe Straight Adapter

4730-99-873-4099
Pipe Tee

4730-99-153-4895
Drain Outlet

991534895
1047A-A FB: RNCC: 3 | RNVC: 2

5 Feb 2013

4730-99-730-7247
Union Nut

997307247
0086502036: RNCC: 3 | RNVC: 2
6502036: RNCC: 5 | RNVC: 2
86502036: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-308-6026
Tube Fitting Compression Ferrule

993086026
FFM6: RNCC: 3 | RNVC: 2

30 Oct 1998

4730-99-560-3401
Tube Elbow

995603401
D80678: RNCC: 3 | RNVC: 1

25 Apr 1991

4730-99-207-6653

4730-99-709-1087
Union

4730-99-810-7672
Hose Tail

998107672
8034: RNCC: 3 | RNVC: 2

13 Oct 2003

4730-99-790-6112
Pipe Tee

997906112
SK1058: RNCC: 3 | RNVC: 1

25 Apr 1991

4730-99-789-6608
Hose Clamp

997896608
CA0200: RNCC: 3 | RNVC: 2

1 Aug 2007

4730-99-831-4332
Tube-Hose Fitting Compression Sleeve

998314332
76: RNCC: 3 | RNVC: 1

25 Apr 1991

4730-99-806-1643
Pi Straight Adapter

998061643
116685: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-790-6107
Pipe Tee

997906107
SK.1022: RNCC: 3 | RNVC: 1

25 Apr 1991

4730-99-870-5531
Lubricating Nipple

998705531
LN050041: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-842-6943
Pipe Plug

998426943
UF5402: RNCC: 3 | RNVC: 2
LV7RRUF5402: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-811-8631
Pi Straight Adapter

998118631
GMB12478: RNCC: 3 | RNVC: 2
00254-5014: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-784-9587
Pipe Reducer

997849587
1066 MC 106: RNCC: 3 | RNVC: 2
MC 106: RNCC: 5 | RNVC: 1
103/1066 MC 106: RNCC: 5 | RNVC: 2
H926-249342: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-601-7117
Pipe Nipple

996017117
349SS3553: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-134-8254
Pipe Connector

991348254
FRS325R10: RNCC: 3 | RNVC: 2
FRS325R10: RNCC: 5 | RNVC: 2
AIRWORTHY CERTIFICATED ITEM: RNCC: 6 | RNVC: 9

29 Jan 2008

4730-99-599-9737
Elbow

995999737
131601: RNCC: 3 | RNVC: 2

6 Oct 2006

4730-99-949-9097
Tube Seal Bonnet

999499097
UK3503: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-528-6255
Pipe Straight Adapter

4730-99-545-3300

4730-99-630-0994
Pipe Nipple

4730-99-528-9830
Steam Trap

4730-99-457-4216

4730-99-545-5535

4730-99-545-5480

4730-99-528-9832
Steam Trap

4730-99-545-5562

4730-99-626-5268
Pipe Nipple

4730-99-465-7761
Packing Nut

4730-99-496-1004
Tube Reducer

4730-99-327-9163

4730-99-740-9282
Tube Reducer

4730-99-455-3816

4730-99-477-2801

4730-99-740-9276

4730-99-775-8899
Tube Coupling

4730-99-752-3794

4730-99-471-5232

4730-99-775-8411
Packing Nut

4730-99-775-8922

4730-99-752-7574

4730-99-741-8867
Claw Coupling

997418867
QF075: RNCC: 3 | RNVC: 2
QF75: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-725-8098
Connection Assembly

997258098
TM85: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-562-5436
Flange To Tube Elbow

995625436
77801490: RNCC: 3 | RNVC: 2

22 Jun 2002

4730-99-533-7666
Composite Fl Collar

995337666
BR3013-2-PT2: RNCC: 4 | RNVC: 1
001249042: RNCC: 5 | RNVC: 2
BR3013-2-PT2: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-153-5745
Connector

991535745
M2825021900000: RNCC: 3 | RNVC: 2

11 Apr 2013

4730-99-425-6852

4730-99-229-4823
Pipe To Tube Straight Adapter

992294823
ND40907: RNCC: 3 | RNVC: 2

24 Jan 2007

4730-99-635-9167
Pipe Reducer

996359167
456326A: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-102-4574

4730-99-524-3553
Quick Coupling Half

4730-99-500-3874
Pipe To Tube Straight Adapter

995003874
MSC 1/2-1/2: RNCC: 3 | RNVC: 2

13 Apr 2007

4730-99-632-5386
Pipe To Tube Straight Adapter

996325386
M37082S: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-606-5461
Machine Thread Plug

996065461
B298537: RNCC: 3 | RNVC: 2
UB298537: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-214-1995
Fluid Passage Bolt

992141995
33557123: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-405-6065
Pipe Flange

994056065
B296: RNCC: 3 | RNVC: 2
102-296: RNCC: 5 | RNVC: 2
X3XCLRB296: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-719-1441
Fluid Pressure Line Multiple Connector

997191441
V102906: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-200-3140
Pipe Flange

992003140
6138: RNCC: 3 | RNVC: 9

25 Apr 1991

4730-99-412-4329
Packing Nut

994124329
RN464: RNCC: 3 | RNVC: 2
4305E: RNCC: 5 | RNVC: 1
RN61: RNCC: 6 | RNVC: 9
53DH1508: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-560-0479
Fluid Flow Restrictor

995600479
B7526SK: RNCC: 3 | RNVC: 2
EM43886 ITEM 50: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-134-8167
Fluid Passage Bolt

991348167
15764C: RNCC: 3 | RNVC: 2

8 Jan 2008

4730-99-113-5663
Tube Nipple

991135663
STD.354MK.D: RNCC: 3 | RNVC: 2
STD.354MK.D: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-773-1389
Pipe To Tube Elbow

997731389
95 433 199: RNCC: 3 | RNVC: 2
5/1869: RNCC: 5 | RNVC: 1
5/1869 REFERENCE 79: RNCC: 5 | RNVC: 2
RAK 4659: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-532-1401
Union Nut

995321401
38000104: RNCC: 3 | RNVC: 2
B1745H: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-992-1282
Fluid Flow Restrictor

999921282
SPD.P03.ACF.0085: RNCC: 3 | RNVC: 2

8 Aug 2000

4730-99-983-6347
Pipe To Hose Straight Adapter

999836347
302025: RNCC: 3 | RNVC: 2
1252: RNCC: 5 | RNVC: 2
FL963GZ0019: RNCC: 6 | RNVC: 9

23 Oct 1996

4730-99-948-3997
Pipe To Tube Elbow

999483997
65: RNCC: 3 | RNVC: 1
5364116SH26ITEM6: RNCC: 5 | RNVC: 2
S314232: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-983-9085
Fitting

999839085
530.055.0029: RNCC: 3 | RNVC: 2
530.055.0029: RNCC: 6 | RNVC: 9
992K90048: RNCC: 6 | RNVC: 9

16 Feb 2000

4730-99-980-8362
Pipe Reducer

999808362
189358: RNCC: 3 | RNVC: 2

2 Nov 1993

4730-99-436-7711
Pipe Tee

4730-99-436-8984

4730-99-015-8445

4730-99-749-5761
Cock

4730-99-052-0053
Tee

4730-99-412-1652

4730-99-774-1091
Flange To Pip Elbow

4730-99-610-9835
Fluid Flow Restrictor Unit

996109835
07-7805B: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-710-1659
Pipe To Tube Straight Adapter

997101659
NM93265: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-741-7391
Pipe Reducer

997417391
G04025: RNCC: 3 | RNVC: 9
63864AC: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-301-5033
Fluid Pressure Line Multiple Connector

993015033
AAC79C188: RNCC: 3 | RNVC: 2

1 Dec 1995

4730-99-725-7048
Nose Adaptor

997257048
2655K569: RNCC: 3 | RNVC: 2
TORNADO 8353: RNCC: 6 | RNVC: 9

28 Aug 2002

4730-99-789-0028
Union Nut

997890028
50569804057: RNCC: 3 | RNVC: 2
TS 4469-C: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-020-8174
Swivel Elbow

990208174
3B90/8-8: RNCC: 3 | RNVC: 2

18 Dec 1997

4730-99-832-0796
Lubrication Fitting

998320796
70917889: RNCC: 3 | RNVC: 2
917889: RNCC: 5 | RNVC: 2

16 Sep 1980

4730-99-836-1532
Lubrication Fitting

998361532
262535: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-838-7619
Lubrication Fitting

998387619
70923014: RNCC: 3 | RNVC: 2
923014: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-743-4802
Pipe Flange

997434802
MCM/327/01/049: RNCC: 3 | RNVC: 1
004501330/001: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-325-2162
Gland

993252162
AS16-PS/A3C: RNCC: 3 | RNVC: 2
AS16-PS/A3C: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-234-5246
Hydraulic Adaptor

992345246
8592: RNCC: 3 | RNVC: 2

22 Feb 2006

4730-99-192-5077
Pipe Plug

991925077
177051: RNCC: 3 | RNVC: 2

1 Feb 1994

4730-99-201-8153
Fluid Pressure Line Multiple Connector

992018153
0201106: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-996-7278
Hose

999967278
ARDM40284: RNCC: 3 | RNVC: 2

26 May 2004

4730-99-983-1446
Tube Nipple

999831446
16XHBU: RNCC: 3 | RNVC: 2

17 Apr 2010

4730-99-994-5900
Tube To Boss Straight Adapter

999945900
MBEU185539: RNCC: 3 | RNVC: 2

19 Mar 2004

4730-99-536-1894
Pipe Plug

995361894
ST012701: RNCC: 3 | RNVC: 2
012701: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-543-2362
Pipe To Tube Straight Adapter

995432362
37779: RNCC: 3 | RNVC: 2
37779: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-300-8961
Sediment Strainer

993008961
1630200: RNCC: 3 | RNVC: 2
12: RNCC: 5 | RNVC: 1
FIGURE 12: RNCC: 5 | RNVC: 1
TIS 7.430: RNCC: 5 | RNVC: 1

16 Dec 1993

4730-99-764-7379
Pipe Union

997647379
68C/L: RNCC: 3 | RNVC: 1
68C/L: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-820-1667
Test Poin Connector

998201667
EMA 3/R 1/8: RNCC: 3 | RNVC: 2

29 Jul 1993

4730-99-829-8783
Tee Adaptor

998298783
9248958: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-834-7118
Hydraulic Manifold Assembly

998347118
04 44-1111TBSMMMANP462: RNCC: 3 | RNVC: 2
22084: RNCC: 5 | RNVC: 2

10 Aug 2006

4730-99-944-8197
Pipe Elbow

999448197
AE1M2566300-8: RNCC: 3 | RNVC: 2
M2566300-8: RNCC: 5 | RNVC: 2
M2566300-8: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-821-6590
Tube C Inverted Nut

4730-99-148-9649
Pipe Flange

991489649
4322188: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-533-3712
Pipe Tee

995333712
EFT4: RNCC: 3 | RNVC: 2
5004153C: RNCC: 5 | RNVC: 2
820A367: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-499-9222
Tube-Hose Fitting Compression Sleeve

994999222
570508: RNCC: 3 | RNVC: 2
570508: RNCC: 5 | RNVC: 2

15 Dec 1993

4730-99-745-0104
Pipe Elbow

4730-99-229-4728

4730-99-660-9211

4730-99-701-4759
Pi Straight Adaptor

4730-99-408-4215

4730-99-223-7437
Pipe Straight Adapter

4730-99-460-0535

4730-99-458-0848

4730-99-551-5823
Quick Disconnect Coupling Assembly

995515823
SM 194: RNCC: 3 | RNVC: 2

25 Mar 2008

4730-99-521-5184
Clamp Hose Guard

995215184
GUARDTORQUECLAMP: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-958-6450
Pipe Elbow

999586450
ST05291X658: RNCC: 3 | RNVC: 2
CV174402: RNCC: 5 | RNVC: 2

26 Oct 2011

4730-99-350-3176
Sediment Strainer Element

993503176
F20426: RNCC: 3 | RNVC: 2

25 Jan 1993

4730-99-541-0596
Pipe To Tube Straight Adapter

995410596
001000808: RNCC: 3 | RNVC: 1
GD1296: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-826-8856
Pipe Bleed Assembly

998268856
FV799530: RNCC: 3 | RNVC: 2
CV5942: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-822-2343
Pipe Plug

998222343
E450100S76: RNCC: 3 | RNVC: 2
1475553: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-826-2329
Tube Coupling Inverted Nut

998262329
FV801605: RNCC: 3 | RNVC: 2
CV1605: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-962-9799
Packing Nut

999629799
FL16832: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-911-0300
Pipe To Tube Elbow

999110300
SDA150877: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-828-3675
Tube Nipple

998283675
FV 871516: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-825-4211
Magnetic Drain Plug

998254211
9365635: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-826-6824
Swivel Tee Assembly

998266824
EVT12SR: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-830-6448
Fluid Pressure Line Multiple Connector

998306448
3047776: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-549-1034
Leak-Off To Fi Pipe

995491034
34417163: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-715-1620
Pipe To Tube Straight Adapter

997151620
FV 2067132: RNCC: 3 | RNVC: 2
784341-92: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-961-3043
Adaptor

999613043
CV10888: RNCC: 3 | RNVC: 2

27 May 2003

4730-99-902-1702
Union Tailpiece

999021702
SOH13.07: RNCC: 3 | RNVC: 2
AB.10: RNCC: 5 | RNVC: 1
SOH13: RNCC: 5 | RNVC: 1

8 Jul 1992

4730-99-603-6147
Pipe Tee

996036147
A247368: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-639-3929
Pipe To Tube Straight Adapter

996393929
11A3-80724: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-815-3146
Pipe To Hose Straight Adapter

998153146
50045018: RNCC: 1 | RNVC: 2
GA4: RNCC: 3 | RNVC: 2

23 Nov 2011

4730-99-815-3211
Soil Pipe Plug

998153211
WP29G: RNCC: 3 | RNVC: 2
79430778: RNCC: 5 | RNVC: 2
2500600482: RNCC: 5 | RNVC: 2

24 Nov 2011

4730-99-815-3209
Soil Pipe Tee

998153209
WP22G: RNCC: 3 | RNVC: 2
79430520: RNCC: 5 | RNVC: 2
2500602438: RNCC: 5 | RNVC: 2

24 Nov 2011

4730-99-814-6956
Pipe To Tube Union

998146956
79902893: RNCC: 3 | RNVC: 2
FT554413: RNCC: 5 | RNVC: 2
2500601739: RNCC: 5 | RNVC: 2

20 Sep 2011

4730-99-339-5287
Pipe Nipple

993395287
SF 7025: RNCC: 3 | RNVC: 2

13 Aug 2012

4730-99-799-9136
Pipe To Tube Straight Adapter

997999136
FV851679: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-815-3861
Pipe Reducer

998153861
PE22882: RNCC: 3 | RNVC: 2

6 Dec 2011

4730-99-566-2451
Tube Elbow

995662451
1001592: RNCC: 3 | RNVC: 2

29 Oct 2009

4730-99-803-0851
Pipe Tee

998030851
LBF.BW.0085: RNCC: 3 | RNVC: 2
1IN EQUAL TEE SCH40: RNCC: 5 | RNVC: 1

12 Jul 1991

4730-99-809-0832
Pipe Union Nut

998090832
190868: RNCC: 3 | RNVC: 2
0190868: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-996-0093
Pipe Coupling

999960093
111245-3749: RNCC: 3 | RNVC: 2

13 Nov 1992

4730-99-805-4287
Protection Cover

998054287
FV 474590: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-133-3858
Reducer Assembly

991333858
SC-101865-1: RNCC: 3 | RNVC: 2
SMS DART A2: RNCC: 6 | RNVC: 9

20 Jan 2005

4730-99-530-2423
Pipe To Hose Straight Adapter

995302423
SSN07/Y/548/187: RNCC: 3 | RNVC: 2
Y/548/187: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-320-4882
Pipe Flange

993204882
B-20798: RNCC: 3 | RNVC: 2
20798: RNCC: 5 | RNVC: 2

20 Sep 1995

4730-99-822-4045
Pipe Reducer

998224045
04000-14-16: RNCC: 3 | RNVC: 1
3001499: RNCC: 5 | RNVC: 2
MEXE22068-79: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-135-9570
Pipe Elbow

991359570
8533 AND F375: RNCC: 3 | RNVC: 2
F4305-1: RNCC: 5 | RNVC: 1
ST046907: RNCC: 5 | RNVC: 2
046907: RNCC: 5 | RNVC: 2
S171-5ITEM66: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-825-3505
Pipe Fittin Adaptor

998253505
NO PRIMARY REF 99-825-3505: RNCC: 3 | RNVC: 2
B10: RNCC: 5 | RNVC: 2
JARCB10: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-458-9459
Adaptor

994589459
NO PRIMARY REF 99-458-9459: RNCC: 3 | RNVC: 2
0249-5989: RNCC: 5 | RNVC: 2

24 Apr 1989

4730-99-827-9248
Pipe Union Nut

998279248
33-361-708-00: RNCC: 3 | RNVC: 2
7204643: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-840-0753
Elbow

998400753
QF50003034: RNCC: 3 | RNVC: 2
QF50003034: RNCC: 5 | RNVC: 2
DA24004738 ITEM 3: RNCC: 5 | RNVC: 2
DA24004738/3: RNCC: 5 | RNVC: 2

26 Feb 2004

4730-99-748-9583
Fluid Pressure Line Multiple Connector

997489583
3-OWE-169295: RNCC: 3 | RNVC: 2
3-OWE-169295: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-974-7475
Fitting Assembly

999747475
ML2-74-0123: RNCC: 3 | RNVC: 2
ML2-74-0123: RNCC: 5 | RNVC: 2

27 Apr 2005

4730-99-822-3288
Pipe To Tube Straight Adapter

998223288
4061-3AP1: RNCC: 3 | RNVC: 2
5066-215: RNCC: 5 | RNVC: 2
602687: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-767-5262
Pipe Coupling

997675262
S20468S: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-332-1050
Pipe Plug

993321050
432000: RNCC: 3 | RNVC: 2

8 Mar 2000

4730-99-700-3728
Fluid Pressure Line Multiple Connector

997003728
B110106: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-701-4987
Pipe Coupling

997014987
H010202576: RNCC: 3 | RNVC: 2
102-2576: RNCC: 5 | RNVC: 1
320020: RNCC: 5 | RNVC: 2

25 Jan 1993

4730-99-424-3873
Anchor And Reinforcement Pipe Clamp

994243873
F196083: RNCC: 3 | RNVC: 2
F196083: RNCC: 3 | RNVC: 9
26FX2107: RNCC: 6 | RNVC: 9
26FX2107: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-668-0158
Hose Clamp

996680158
13943474: RNCC: 3 | RNVC: 2
CV182879: RNCC: 5 | RNVC: 2
VOE13943474: RNCC: 5 | RNVC: 2

9 Jun 2011

4730-99-991-2150
Sediment Strainer Body

999912150
701031218: RNCC: 3 | RNVC: 2

24 Nov 2011

4730-99-542-3696
Sediment Strainer Element

995423696
37212-420: RNCC: 3 | RNVC: 2
37212-420-91: RNCC: 5 | RNVC: 2
H474-355850: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-560-6269
Pipe Cou End Flange

995606269
PC1-56061E: RNCC: 3 | RNVC: 1
PC1-56061: RNCC: 5 | RNVC: 1
QCAPC1-56061E: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-152-6774
Pipe Plug

991526774
K615HE075: RNCC: 3 | RNVC: 2
A825/156 ITEM 34: RNCC: 5 | RNVC: 2

25 Oct 2011

4730-99-420-3097
Pi Straight Adapter

994203097
DNC15-262: RNCC: 3 | RNVC: 1
DNC15-262-PATTERN12974: RNCC: 5 | RNVC: 2
GD1059: RNCC: 5 | RNVC: 2
0254-12974: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-796-3379
Packing Nut

997963379
F.188560: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-101-8296
Pipe Reducer

991018296
A34695: RNCC: 3 | RNVC: 2
W1S9561C1-1: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-601-9961
Pipe Tee

996019961
150-4027: RNCC: 3 | RNVC: 2

12 Aug 2013

4730-99-530-3345
Double-Ended Union

995303345
A277360: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-540-7788
Pipe Straight Adapter

4730-99-628-6187
Self- Coupling Half

4730-99-531-8545
Bend

4730-99-541-1932
Special Nipple

4730-99-462-8751
Pipe To Tube Straight Adapter

994628751
CH54031: RNCC: 3 | RNVC: 2
27KH1601: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-244-9331
Air Hos Adaptor Kit

992449331
NE5776: RNCC: 3 | RNVC: 2

21 Jul 1998

4730-99-528-5143
Sediment Strainer

995285143
046010105: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-591-5715
Pipe Tee

995915715
12012279: RNCC: 3 | RNVC: 2
2500600027: RNCC: 5 | RNVC: 2

27 Jun 2011

4730-99-603-6007
Anchor And Reinforcement Pipe Clamp

996036007
F275852: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-720-6573
Pipe Swivel Joint

997206573
4322341: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-252-7100
Sediment Strainer Element

992527100
099259422: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-821-4699
Fluid Passage Bolt

998214699
FV731930-1: RNCC: 3 | RNVC: 2
FV731930-1: RNCC: 5 | RNVC: 2

25 Aug 1978

4730-99-831-6215
Pipe Nipple

998316215
E 136-2: RNCC: 3 | RNVC: 1
E136: RNCC: 5 | RNVC: 1
1050/341.2: RNCC: 5 | RNVC: 2
ES122C1A: RNCC: 6 | RNVC: 9

21 Apr 1994

4730-99-827-7838
Pipe To Tube Tee

998277838
SF1234-7: RNCC: 3 | RNVC: 2
41731141: RNCC: 5 | RNVC: 2
8942406: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-901-6678
Fluid Pressure Line Multiple Connector

999016678
W1S7884CSH1-1: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-930-0171
Pipe Coupling

999300171
AP1STANDARD5L: RNCC: 3 | RNVC: 2
47-1: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-500-4436
Manifold

995004436
SSN07/Y/275/-/1206/1: RNCC: 3 | RNVC: 2
001147881 SHEET 02: RNCC: 5 | RNVC: 1
001147881 SHEET 03: RNCC: 5 | RNVC: 1
001147881/03: RNCC: 5 | RNVC: 1
Y/275/-/1206 PART 1: RNCC: 5 | RNVC: 1
Y/275/-/1206/1: RNCC: 5 | RNVC: 1
SSN07/Y/275/-/1206 PART 1: RNCC: 5 | RNVC: 2
001147881: RNCC: 6 | RNVC: 9

4 Apr 1996

4730-99-768-7525
Pipe To Tube Straight Adapter

997687525
TMFNN-08-20: RNCC: 3 | RNVC: 9

25 Apr 1991

4730-99-663-1534
Pipe To Tube Straight Adapter

996631534
BD6324: RNCC: 3 | RNVC: 2
BD6324: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-554-3216
Boss Tee

995543216
T18L: RNCC: 3 | RNVC: 1

25 Apr 1991

4730-99-803-9917
Lubricating Oil Cup

998039917
1744: RNCC: 3 | RNVC: 2
5549-260: RNCC: 5 | RNVC: 2
Y5549-260: RNCC: 5 | RNVC: 2
LV6MT4CB5549-260: RNCC: 6 | RNVC: 9
16E13072: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-878-9863
Connector

998789863
2221.0095: RNCC: 3 | RNVC: 2
30/1060: RNCC: 5 | RNVC: 2

2 Sep 1999

4730-99-780-8360
Pipe Flange

997808360
110164SHT97: RNCC: 3 | RNVC: 2
26VC/16218: RNCC: 6 | RNVC: 9

25 Jan 2002

4730-99-197-0074
Special Fitting

991970074
EA2920Z524-101: RNCC: 3 | RNVC: 2

28 Feb 1995

4730-99-774-8850
Pipe To Hose Straight Adapter

997748850
09891: RNCC: 3 | RNVC: 9

25 Apr 1991

4730-99-803-5716
Strainer Pusher

998035716
MWIG300: RNCC: 3 | RNVC: 2

25 Jun 1999

4730-99-804-8500
Collet

998048500
M16RJD: RNCC: 3 | RNVC: 2

23 Nov 1998

4730-99-796-8259
Straight Pi Adaptor

997968259
FV2026013: RNCC: 3 | RNVC: 2

14 Jun 1985

4730-99-777-2967
Pipe Tee

997772967
TEE PIECE: RNCC: 3 | RNVC: 1

25 Apr 1991

4730-99-830-9491
Pipe Tee

998309491
161: RNCC: 3 | RNVC: 1
GF130: RNCC: 3 | RNVC: 1
BS143AND1256: RNCC: 4 | RNVC: 1
164P46: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-224-3228
Pipe Nipple

992243228
K15701: RNCC: 3 | RNVC: 2
6D2604: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-213-7262
Drainage Pipe Coupling

992137262
3D105: RNCC: 3 | RNVC: 2
2500601354: RNCC: 5 | RNVC: 2

9 Jun 2011

4730-99-322-3797
Pipe Tee

993223797
13933859: RNCC: 3 | RNVC: 2
CV143544: RNCC: 5 | RNVC: 2

24 Jun 2011

4730-99-700-8261
Fuel Hose Assembly

997008261
15G4N0307A: RNCC: 3 | RNVC: 2
DGFVE SPECIFICATION 422: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-540-7420

4730-99-532-5387

4730-99-423-1968
Pipe Plug

994231968
NO PRIMARY REF 99-423-1968: RNCC: 3 | RNVC: 2
G-1-L-21: RNCC: 5 | RNVC: 2
G-1-L-21: RNCC: 5 | RNVC: 9

18 Feb 2011

4730-99-797-0855
Fluid Pressure Line Multiple Connector

997970855
1074 MHS 956: RNCC: 3 | RNVC: 2
001114136/CS.207: RNCC: 5 | RNVC: 1
H926-344279: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-075-5080
Pipe Cap Assembly

990755080
SSN.08/Y/222/141: RNCC: 3 | RNVC: 1
QCA/SSN08/Y/222/141: RNCC: 5 | RNVC: 2

19 Apr 1993

4730-99-535-1185
Brazing Ring

995351185
NO PRIMARY REF 99-535-1185: RNCC: 3 | RNVC: 2
C61854-5: RNCC: 5 | RNVC: 2
C61854PT5: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-923-5273
Pipe Coupling

999235273
BS1387-TABLE 6 FIG 1 50: RNCC: 4 | RNVC: 1
BS1387: RNCC: 5 | RNVC: 1
BS1486 PART 1: RNCC: 5 | RNVC: 2
0267-10531: RNCC: 6 | RNVC: 9
0267-923-5273: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-867-9312
Tube Coupling

998679312
7236-26182-40: RNCC: 3 | RNVC: 2
1178152000: RNCC: 5 | RNVC: 2
7236-26182-40-2: RNCC: 5 | RNVC: 2
5038432: RNCC: 5 | RNVC: 2

14 Dec 2011

4730-99-970-1660

4730-99-977-5979

4730-99-971-1456

4730-99-977-6048
Tube Reducer

4730-99-541-0585
Tube Fitting Brazing Ferrule

995410585
001000806: RNCC: 3 | RNVC: 1
GD1285: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-556-0229
Pipe To Tube Straight Adapter

995560229
T60064: RNCC: 3 | RNVC: 2
T60064F: RNCC: 5 | RNVC: 2
929-960100: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-488-8855
Pipe Bushing

994888855
18042190: RNCC: 3 | RNVC: 2
2500601763: RNCC: 5 | RNVC: 2

30 Jun 2011

4730-99-341-3512
Tube Nipple

993413512
FV 2067195: RNCC: 3 | RNVC: 2
712751: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-404-4250
Fluid Passage Bolt

994044250
J903035: RNCC: 3 | RNVC: 2
CV146780: RNCC: 5 | RNVC: 2

16 Mar 2009

4730-99-136-7513
Spacer Ass Flexible

4730-99-558-6025
Tube Tee

995586025
E560: RNCC: 3 | RNVC: 2

21 Feb 1989

4730-99-710-4905
Pipe To Tube Straight Adapter

997104905
SJCU3298: RNCC: 3 | RNVC: 2
36AD2139: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-152-9401
Connector

991529401
M2825050720000: RNCC: 3 | RNVC: 2

10 Feb 2012

4730-99-160-7019
Fitting

991607019
60 000 034: RNCC: 3 | RNVC: 2

2 Jul 2002

4730-99-104-4178
Pipe To Tube Straight Adapter

991044178
561936: RNCC: 3 | RNVC: 2
36DE3119: RNCC: 6 | RNVC: 9
36DE3119: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-549-4098
Quick Disconnect Coupling Half

995494098
45/904600: RNCC: 3 | RNVC: 2

13 Nov 2001

4730-99-103-7540
Adaptor Bushing

991037540
KS71062-2: RNCC: 3 | RNVC: 2
10AR3110: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-299-0295
Tube

992990295
SSL-10-K12: RNCC: 3 | RNVC: 2
020TB0044: RNCC: 6 | RNVC: 9

22 Mar 2002

4730-99-912-9161
Pipe To Tube Straight Adapter

999129161
S6976S: RNCC: 3 | RNVC: 2
80-08-70-4077: RNCC: 5 | RNVC: 2
S6976: RNCC: 5 | RNVC: 2
001-L198-36: RNCC: 5 | RNVC: 2
80-08-70-4077: RNCC: 5 | RNVC: 2
W3WC56392: RNCC: 6 | RNVC: 9
W3WCBEMS6976S: RNCC: 6 | RNVC: 9
16B9248: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-808-7343
Gland

998087343
5515703: RNCC: 3 | RNVC: 2
H123-959629: RNCC: 6 | RNVC: 9
LE463B1: RNCC: 6 | RNVC: 9

15 May 1996

4730-99-782-1593
Pipe To Tube Straight Adapter

997821593
MF/01001/AZ/102: RNCC: 3 | RNVC: 2
004464763: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-733-5750
Pipe Elbow

997335750
163/2127/1: RNCC: 3 | RNVC: 2
1076/FWC 118 32: RNCC: 5 | RNVC: 2
163/2127: RNCC: 5 | RNVC: 2
H926-382548: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-746-0042
Sediment Strainer Element

997460042
099993-03: RNCC: 3 | RNVC: 2
001207504: RNCC: 5 | RNVC: 1
108300 ITEM 17: RNCC: 5 | RNVC: 2
108301-17: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-777-3287
Pipe Tee

997773287
1074 S.A. 7(B): RNCC: 3 | RNVC: 2
H926-301297: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-126-3698
Nipple

991263698
302032: RNCC: 3 | RNVC: 2
FL963GZ0023: RNCC: 6 | RNVC: 9

23 Oct 1996

4730-99-771-7049
Pipe To Tube Straight Adapter

997717049
41731050: RNCC: 3 | RNVC: 2
731050: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-549-8133
Pi Straight Adaptor

4730-99-548-6653
Packing Nut

4730-99-801-8697

4730-99-799-0818
Tube Reducer

4730-99-598-7055
Stud Elbow

4730-99-550-1400

4730-99-593-8657
Bend

4730-99-536-7177
Screwed N1pple

4730-99-536-9847
Pipe Straight Adapter

4730-99-533-1984

4730-99-502-3367
Adaptor

995023367
104341: RNCC: 3 | RNVC: 2
ID2472/29: RNCC: 5 | RNVC: 2

2 Jan 2014

4730-99-776-7867
Hose Coupling

997767867
HUAZ3376: RNCC: 3 | RNVC: 2
HU3376: RNCC: 5 | RNVC: 2
HUAZ3376: RNCC: 5 | RNVC: 9

25 Apr 1991

Load More Results