What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Pipe Bend?

A Return Pipe Bend (BEND,PIPE,RETURN) is a fitting designed to join a pipe in a parallel position to another pipe for reversing the flow of gas, steam, air, or liquids. Excludes BEND, SOIL PIPE.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Soil Pipe Reducer?

A Soil Pipe Reducer (REDUCER,SOIL PIPE) is a straight fitting with the spigot end larger than the hub end. It is used to connect two pieces of soil pipe of different size.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Pipe Lateral?

A Pipe Lateral (LATERAL,PIPE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit pipes and/or pipe fittings to be taken off laterally from the main line. It may have side inlet(s).

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Soil Pipe Lateral?

A Soil Pipe Lateral (LATERAL,SOIL PIPE) is a fitting having one or two branches which are fixed at various angles other than 90 degrees to the run. If item has two branches, they will be located on opposite sides of the run (180 degrees apart) and will be identical. It may have side inlets.

What is a Soil Pipe Tee?

A Soil Pipe Tee (TEE,SOIL PIPE) is a fitting consisting of a run and a branch. The branch may be either curved or straight, but the axis of the end connection intersects the axis of the run at right angles. It may have side inlets.

What is a Tube Coupling Inverted Nut?

A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.

What is a Tube Coupling Nut?

A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.

What is an Union Tailpiece?

An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.

What is an Union Thread Piece?

An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - United Kingdom (UK)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by United Kingdom (UK) - NCB is 99

Page 121 of 242

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by United Kingdom

47	30	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - United Kingdom (UK)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 43 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 608 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 26 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 14 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 16 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
What is a Bulkhead Hose Connector? 44 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 123 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 192 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 30 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Cap? 97 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 18 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 1095 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 322 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 1326 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 970 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 64 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Pipe To Hose Straight Adapter? 986 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 8242 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 197 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Pipe Bushing? 294 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Hose Nipple? 57 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 1594 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 953 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 86 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 586 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Tube Union? 47 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 172 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Pipe Bend? 11 Items: A Return Pipe Bend (BEND,PIPE,RETURN) is a fitting designed to join a pipe in a parallel position to another pipe for reversing the flow of gas, steam, air, or liquids. Excludes BEND, SOIL PIPE.
What is a Return Tube Bend? 18 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 33 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 131 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Soil Pipe Reducer? 28 Items: A Soil Pipe Reducer (REDUCER,SOIL PIPE) is a straight fitting with the spigot end larger than the hub end. It is used to connect two pieces of soil pipe of different size.
What is a Pipe Flange? 1150 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Machine Thread Plug? 108 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Pipe Lateral? 30 Items: A Pipe Lateral (LATERAL,PIPE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit pipes and/or pipe fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Tube Lateral? 16 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 122 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 2442 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 18 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 312 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Tube Tee? 892 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Soil Pipe Lateral? 30 Items: A Soil Pipe Lateral (LATERAL,SOIL PIPE) is a fitting having one or two branches which are fixed at various angles other than 90 degrees to the run. If item has two branches, they will be located on opposite sides of the run (180 degrees apart) and will be identical. It may have side inlets.
What is a Soil Pipe Tee? 10 Items: A Soil Pipe Tee (TEE,SOIL PIPE) is a fitting consisting of a run and a branch. The branch may be either curved or straight, but the axis of the end connection intersects the axis of the run at right angles. It may have side inlets.
What is a Tube Coupling Inverted Nut? 365 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Tube Coupling Nut? 113 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is an Union Tailpiece? 217 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 61 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Pipe Swivel Joint? 56 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 525 Items
What is a Sediment Strainer? 692 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 24 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 54 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 16 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 228 Items
What is a Pipe Repair Clamp? 51 Items: A Pipe Repair Clamp (CLAMP,REPAIR,PIPE) is a one-piece or two-piece metal clamp generally used with gasket(s) and designed to repair longitudinal splits and pit holes and/or to support thin walls in a straight run of pipe. See also CLAMP, LEAK REPAIR, PIPE COUPLING.
What is a Pipe Cap? 247 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 238 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 14 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 1072 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 1811 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 551 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
What is a Hose Reducer? 41 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 2097 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 1319 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Pipe Cross? 115 Items: A Pipe Cross (CROSS,PIPE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is designed to be used as a junction at the intersection of pipe and/or pipe fittings.
What is a Pipe To Tube Cross? 58 Items: A Pipe To Tube Cross (CROSS,PIPE TO TUBE) is a fitting having four branches in the same plane whose axes form right angles. One or more of the connections have standard pipe threads or are unthreaded and designed to accommodate a pipe. The remaining connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It may have side inlet(s).
What is a Tube Cross? 86 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Spool Piece? 28 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Water Closet Bend? 10 Items: A Water Closet Bend (BEND,WATER CLOSET) is a waste line fitting designed for use with a water closet, to provide a means of connecting a water closet bowl to a waste line.
What is a Pipe Locknut? 74 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 21 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Drainage Pipe Lateral? 23 Items: A Drainage Pipe Lateral (LATERAL,DRAINAGE PIPE) is a fitting having one or two branches which are fixed at various angles other than 90 degrees (1.5705 radians) to the run. It is used as a junction at the intersection of a drainage line and is provided with a shoulder(s) at the end(s) of its internal threaded or unthreaded portion, conforming to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It may have side inlet(s).
What is a Hose Clamp? 1782 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is a Fuel Feeder Manifold? 10 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Soil Pipe Plug? 10 Items: A Soil Pipe Plug (PLUG,SOIL PIPE) is a fitting designed to fit into the hub end of soil pipe or a soil pipe fitting for sealing.
What is a Pipe Clamp Coupling? 59 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is an Air Line Manifold? 48 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 17 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 153 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 186 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 570 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 70 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 522 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 24 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 565 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Elbow Assembly? 11 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Fluid Flow Restrictor? 857 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 36 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Self-Sealing Coupling Half? 218 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 11 Items
What is a Drainage Pipe Elbow? 29 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Pipe True Wye? 40 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 20 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 24 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Sediment Strainer Element? 1052 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 1394 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 1435 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1839 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 139 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is an Union Nut? 1395 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Quick Disconnect Coupling Assembly? 63 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 63 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 20 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Magnetic Pipe Plug? 43 Items: A Magnetic Pipe Plug (PLUG,PIPE,MAGNETIC) is a pipe fitting primarily designed for installation in a lubrication or hydraulic system. It has an integral magnet in the body and external pipe threads.
What is a Hose To Boss Straight Adapter? 51 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 242 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 473 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 37 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 13 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Pipe To Boss Elbow? 20 Items: A Pipe To Boss Elbow (ELBOW,PIPE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a pipe or pipe fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like. See also ELBOW, PIPE; and ELBOW, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Boss Elbow? 66 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 44 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Pipe To Boss Tee? 10 Items: A Pipe To Boss Tee (TEE,PIPE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a pipe or pipe fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Tube To Boss Tee? 35 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 59 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Boss Nipple? 29 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Pipe Outlet? 23 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 23 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 26 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Hose Straight Adapter? 110 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 86 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 57 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Flange Elbow? 169 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 11 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 18 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Pipe Elbow? 65 Items: A Flange To Pipe Elbow (ELBOW,FLANGE TO PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 118 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Flange Tee? 38 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Soil Pipe Coupling? 21 Items: A Soil Pipe Coupling (COUPLING,SOIL PIPE) is a straight fitting used to connect two pieces of soil pipe of the same size.
What is a Quick Disconnect Plug? 17 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Suction Strainer? 51 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Coupling Swage Ferrule? 19 Items: A Tube Coupling Swage Ferrule (FERRULE,SWAGE,TUBE COUPLING) is a flanged cylindrical metallic item used with a plain end tube and swaged in place. It is designed to be used as a component part of a flexible or rigid tube coupling.
What is a Tube Fitting Insert? 10 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Fluid-Emulsion Spray Nozzle? 46 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 10 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 12 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 11 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Quick-Disconnect Nipple? 12 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is an Exhaust-Intake Pneumatic Muffler? 23 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Flange To Flange Straight Adapter? 29 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
Connector,Tubing,Straight 28 Items
What is a Hydraulic Manifold Assembly? 264 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Tube Swivel Joint? 20 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
Adapter,Check Valve 11 Items
Nipple,Special 34 Items
Adapter Assembly,Valve 18 Items
Adapter And Flange Assembly 17 Items
What is a Tube Coupling Assembly? 18 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 65 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Special-Shaped Hose Clamp? 15 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Pipe To Tube Swivel Joint? 21 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Tube Fitting Compression Ferrule? 60 Items: A Tube Fitting Compression Ferrule (FERRULE,COMPRESSION,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be slipped over tubing. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled, the joint seals at the seat in a manner similar to a seat type union.
What is a Pipe Fitting Flared Collar? 39 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 590 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 63 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 53 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Hydraulic Swivel Joint? 54 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 209 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.

Stock Items From Supply Class 4730 Page 121 of 242

4730-99-462-6551
Flange To Tube Straight Adapter

994626551
EU2810B024-101: RNCC: 3 | RNVC: 2

3 Dec 1996

4730-99-740-6435
Ne Banjo Connection

997406435
MF/01096/CP/001: RNCC: 3 | RNVC: 2
004464379 SHEET 01: RNCC: 5 | RNVC: 2
004464379/01: RNCC: 5 | RNVC: 2
004464379: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-803-0547
Tube C Inverted Nut

4730-99-618-5904
Flange Elbow

996185904
163607: RNCC: 3 | RNVC: 2
AAL014: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-420-4997
Pipe To Tube Straight Adapter

994204997
J507217: RNCC: 3 | RNVC: 2
27Q22364: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-439-7914
Pipe Water Sca Ibfe

994397914
M2825028520000: RNCC: 3 | RNVC: 2

10 Feb 2012

4730-99-413-0414
Packing Nut

994130414
M4811-1-7: RNCC: 3 | RNVC: 2
53B3240: RNCC: 6 | RNVC: 9
53B4650: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-495-4864
Sediment Strainer Element

994954864
MF9361: RNCC: 3 | RNVC: 2
704A34-629-011: RNCC: 5 | RNVC: 2
MF9361: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-411-7967
Pipe To Tube Straight Adapter

994117967
8680Y10: RNCC: 3 | RNVC: 2
27Q20154: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-385-4377
Pipe Clamp Coupling

993854377
C077LEM04800000: RNCC: 3 | RNVC: 2

19 Mar 2007

4730-99-818-4514
Sediment Strainer Element

998184514
C16752: RNCC: 3 | RNVC: 2
XK3742: RNCC: 5 | RNVC: 2

23 Sep 1981

4730-99-319-0709
Pipe Reducer

993190709
20800: RNCC: 3 | RNVC: 2

16 Nov 2009

4730-99-171-1543
Adapter Bushing

991711543
AMP 00 00 74004: RNCC: 3 | RNVC: 2
60201595: RNCC: 5 | RNVC: 2

1 Feb 2005

4730-99-290-7026
Connector

992907026
M2825050220000: RNCC: 3 | RNVC: 2

10 Feb 2012

4730-99-316-6971
Connection Piece

993166971
175-38: RNCC: 3 | RNVC: 2
H042006: RNCC: 5 | RNVC: 2

4 Nov 2010

4730-99-667-6137
Pressing Flange

996676137
G 27154: RNCC: 3 | RNVC: 2

22 Apr 2010

4730-99-445-3608
Constan Pipe Hanger

994453608
CC56A: RNCC: 3 | RNVC: 1
CC56A SIZE 4: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-387-3041
Fluid Passage Bolt

993873041
02/200759: RNCC: 3 | RNVC: 2

28 Mar 2003

4730-99-433-5100
Hydraulic System Accessories Manifold

994335100
332/F7966: RNCC: 3 | RNVC: 2

16 Dec 2010

4730-99-701-4988
Pipe Nipple

997014988
H010202575: RNCC: 3 | RNVC: 2
102-2575: RNCC: 5 | RNVC: 1
320017: RNCC: 5 | RNVC: 2

25 Jan 1993

4730-99-445-1461

4730-99-779-6649
'O'seal Coupling

4730-99-399-1152
Tube Cap

993991152
79902273: RNCC: 3 | RNVC: 2
FT550161: RNCC: 5 | RNVC: 2
2500600078: RNCC: 5 | RNVC: 2

20 Sep 2011

4730-99-740-0537
Pipe Tee Adaptor

4730-99-895-3955

4730-99-746-2151

4730-99-601-7045
Tub Brazing Ferrule

4730-99-536-9799
Blind Pipe Flange

4730-99-466-2535

4730-99-573-0845

4730-99-894-0815
Pipe Nipple

4730-99-600-5048
Pipe Nipple

4730-99-780-3815
Pipe To Tube Straight Adapter

997803815
BN.228: RNCC: 3 | RNVC: 2
509/801: RNCC: 5 | RNVC: 1
SSBN01/509/801: RNCC: 5 | RNVC: 1
H926-274982: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-477-3139
Sediment Strainer Element

994773139
MX00025SL002003: RNCC: 3 | RNVC: 2
004461257: RNCC: 5 | RNVC: 1
004461257 SHEET 05: RNCC: 5 | RNVC: 2
004461257/05: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-108-5330
Pipe Plug

991085330
P32: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-435-1136
Boss Reducer

994351136
148-8336: RNCC: 3 | RNVC: 2

20 Mar 2013

4730-99-648-6282
Pipe Elbow

996486282
B900-5: RNCC: 3 | RNVC: 2
P-500143-001: RNCC: 5 | RNVC: 2
P500143-001: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-219-3884
Elbow

992193884
D5232-184: RNCC: 3 | RNVC: 2
SR1513/8: RNCC: 5 | RNVC: 2
373-97/6: RNCC: 6 | RNVC: 9

17 Nov 1997

4730-99-778-8798
Hose Coupling

997788798
UR3-86: RNCC: 3 | RNVC: 2
102059: RNCC: 5 | RNVC: 2
UR3-SIZE86: RNCC: 5 | RNVC: 2
30211-1/UR3-86: RNCC: 6 | RNVC: 9
30211/UR3-86: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-786-4092
Flexible Coupling

997864092
SSN.13/Z/520/0000/5019 VSB135: RNCC: 3 | RNVC: 2
Z/520/0000/5019 VSB135: RNCC: 5 | RNVC: 1
Z/520/0000/5019 VSB135: RNCC: 5 | RNVC: 1
SSN13/Z/520/0000/5019 VSB135: RNCC: 5 | RNVC: 2
SSN13/Z/520/0000/5019 VSB135: RNCC: 5 | RNVC: 2
SSN.13/Z/520/0000/5019 VSB135: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-392-7576
Pipe To Hose Elbow

993927576
TP844682: RNCC: 3 | RNVC: 2
7150: RNCC: 5 | RNVC: 1
7150257: RNCC: 5 | RNVC: 2
PCF2507FE: RNCC: 5 | RNVC: 2
DC IPT/DLOCV/CM1/2/130: RNCC: 6 | RNVC: 9
EAN 5 025201 419784: RNCC: 6 | RNVC: 9

23 Oct 2002

4730-99-535-9369
Union Nut

995359369
M10NCRH: RNCC: 3 | RNVC: 2
WL8-98-1-00: RNCC: 5 | RNVC: 2

3 Oct 2001

4730-99-779-6571
Pipe Tee Adaptor

997796571
SSN.07/W/525/00/20/2: RNCC: 3 | RNVC: 2
W/525/00/20/2: RNCC: 5 | RNVC: 1
H926-445715: RNCC: 6 | RNVC: 9
H926-806855: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-955-8930
Hydraulic Manifold Assembly

999558930
001293600: RNCC: 3 | RNVC: 2
SST/Y/570/00/A002/000: RNCC: 5 | RNVC: 1
153521030: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-832-4864
Pipe To Tube Straight Adapter

998324864
M25-16SSAR: RNCC: 3 | RNVC: 2
926M25-16-14: RNCC: 5 | RNVC: 2
25-8/8-060: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-961-3213
Quick Disconnect Coupling Half

999613213
F FM13 1/2 BSP: RNCC: 3 | RNVC: 2

28 Sep 2004

4730-99-168-9916
Hydrau Pipe Adapter

991689916
15.8B: RNCC: 3 | RNVC: 2
FH9644B0011: RNCC: 6 | RNVC: 9

25 Apr 1996

4730-99-449-7405
Pipe To Tube Straight Adapter

994497405
D4311: RNCC: 3 | RNVC: 2
27VB3211: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-558-2079
Clamp Ring

995582079
X0080EB00022: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-549-9791
Sediment Strainer Element

995499791
D5199-01-JM65NES60-03: RNCC: 3 | RNVC: 2
D5199-01-JM65NES60 ITEM 03: RNCC: 5 | RNVC: 2

20 Jul 2005

4730-99-812-8324
Pipe To Tube Straight Adapter

998128324
NO PRIMARY REF 99-812-8324: RNCC: 3 | RNVC: 2
432-0342: RNCC: 5 | RNVC: 2
SF 29017: RNCC: 5 | RNVC: 2

6 May 2009

4730-99-795-7490
Pipe Nipple

997957490
MF/01001/AZ/098: RNCC: 3 | RNVC: 2
004464724: RNCC: 5 | RNVC: 2
004464724 SHEET 01: RNCC: 5 | RNVC: 2
004464724/01: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-728-5985
Pipe To Tube Straight Adapter

997285985
H42-0750-50: RNCC: 3 | RNVC: 2
H42075050: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-793-4298
Se Element Strainer

997934298
MB/360/0822: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-793-4302
Pipe Union

997934302
MB/360/0218: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-560-3120
Pipe Flange

995603120
SSBN01-120VAREF154ST3-1004: RNCC: 3 | RNVC: 1
001113064: RNCC: 5 | RNVC: 1
120VAREF154ST3-1004: RNCC: 5 | RNVC: 1
QCASSBN01-120VA154ST3-1004: RNCC: 5 | RNVC: 2
QCASSBN01-120VAREF154ST3-1004: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-557-7298
Flange Adaptor

995577298
701823: RNCC: 3 | RNVC: 2
270597: RNCC: 5 | RNVC: 1
701823-1003: RNCC: 5 | RNVC: 2
929-454717: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-471-3134
Blind Pipe Flange

994713134
BS4504-105-PN16-DN125: RNCC: 4 | RNVC: 1
15134111: RNCC: 5 | RNVC: 2
TT8880174: RNCC: 6 | RNVC: 9
1181/03: RNCC: 6 | RNVC: 9

5 Feb 2004

4730-99-562-2142
Pipe Plug

995622142
1385H: RNCC: 3 | RNVC: 2
ST20108: RNCC: 5 | RNVC: 2
PST20108: RNCC: 5 | RNVC: 2

26 Mar 1991

4730-99-709-5035
Test Rig Connector

997095035
MC1300190: RNCC: 3 | RNVC: 2
072FV0043: RNCC: 6 | RNVC: 9

9 Aug 2006

4730-99-721-1350
Plug Core

997211350
630184055: RNCC: 3 | RNVC: 2
630184055: RNCC: 3 | RNVC: 2

17 Apr 1982

4730-99-409-3483
Pipe Flange

994093483
GMA5516: RNCC: 3 | RNVC: 2
61SL40177: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-946-7061
Hose Cap

999467061
AVA207B: RNCC: 3 | RNVC: 1
Y2632926-2: RNCC: 5 | RNVC: 1
Y2632926-2: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-789-8752
Pipe Tee

997898752
1066 AV 301: RNCC: 3 | RNVC: 2
AV 301: RNCC: 5 | RNVC: 1
H926-272662: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-203-3467
Sediment Strainer Element

992033467
37725448: RNCC: 3 | RNVC: 2
H700-279890: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-528-5168
Solder Type Tube Fitting Plug

995285168
810-089-0018: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-551-9859
Swivel Elbow

995519859
NO PRIMARY REF 99-551-9859: RNCC: 3 | RNVC: 2
EVW-14SR: RNCC: 5 | RNVC: 2
EVW-14SR: RNCC: 5 | RNVC: 9

21 Feb 2011

4730-99-836-3266
Pipe To Tube Straight Adapter

998363266
10905339: RNCC: 3 | RNVC: 9

25 Apr 1991

4730-99-488-9339
Tube-Pipe Fitting Kit

994889339
FV2260940: RNCC: 3 | RNVC: 2

13 Jul 2012

4730-99-781-6588
Pipe Tee

997816588
050 070 945: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-782-1607
Pipe To Tube Straight Adapter

997821607
ND27324: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-783-7729
Union Nut

997837729
200-54909: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-788-7620
Hose Clamp

997887620
CC600094: RNCC: 3 | RNVC: 2
CC 600094L: RNCC: 5 | RNVC: 2

18 Jun 1988

4730-99-786-4633
Pipe Nipple

997864633
BS143&1256-TABLE 21 N8 2: RNCC: 4 | RNVC: 1
280: RNCC: 5 | RNVC: 1
BS1256: RNCC: 5 | RNVC: 1
BS143: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-424-3882
Anchor And Reinforcement Pipe Clamp

994243882
F200401: RNCC: 3 | RNVC: 2
F200401: RNCC: 3 | RNVC: 9
26FX4401: RNCC: 6 | RNVC: 9
26FX4401: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-558-1822
Packing Nut

995581822
15D2137-3: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-791-5455
Pipe Tee

997915455
B.M.671: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-826-6822
Tube Elbow

998266822
EVW20-S: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-815-8049
Pipe Nipple

998158049
38000805: RNCC: 3 | RNVC: 2
CEL2252 ITEM 7: RNCC: 5 | RNVC: 2
02212: RNCC: 5 | RNVC: 2
B52237: RNCC: 5 | RNVC: 2
8730051: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-538-5670

4730-99-538-5466
Pipe Straight Adapter

4730-99-559-5810

4730-99-559-5778

4730-99-559-5769

4730-99-528-7432
Pipe Straight Adapter

4730-99-541-4709
Fluid Passage Bolt

4730-99-540-1001

4730-99-559-5097

4730-99-538-4857
Pipe Straight Adapter

4730-99-541-5778
Lub Fitting Adapter

4730-99-546-8550
Fluid Passage Bolt

4730-99-591-2873
Flange Split

995912873
FV 1055304: RNCC: 3 | RNVC: 2
FV 1055304: RNCC: 5 | RNVC: 2

1 Aug 1994

4730-99-923-3635

4730-99-131-1515
Pipe Cap

991311515
RU52239A: RNCC: 3 | RNVC: 2

6 Jun 1996

4730-99-341-4389
Connector

993414389
M2825011600000: RNCC: 3 | RNVC: 2

20 Nov 2010

4730-99-412-2299
Pipe To Tube Straight Adapter

994122299
40339: RNCC: 3 | RNVC: 2
53B156: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-420-4203
Pipe To Tube Straight Adapter

994204203
837912: RNCC: 3 | RNVC: 2
27Q24482: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-761-7224
Pipe Unit

997617224
BDE3619: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-737-8136
Fluid Pressure Line Multiple Connector

997378136
UB143958: RNCC: 3 | RNVC: 2
B143958: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-741-7399
Pipe Tee

997417399
G05151: RNCC: 3 | RNVC: 9
63864BP: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-760-7339
Hose Clamp

997607339
91018717: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-754-7948
Sediment Strainer

997547948
CW35: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-762-9861
Sediment Bowl

997629861
5229-98: RNCC: 3 | RNVC: 2
5229-98: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-741-6168
Tube Tee

997416168
291R0501046: RNCC: 3 | RNVC: 2
40003996: RNCC: 5 | RNVC: 2

21 Aug 2012

4730-99-201-4480

4730-99-743-9586
Pipe Elbow

4730-99-895-9609

4730-99-881-9378

4730-99-540-8879

4730-99-540-8895
Pipe Flange

4730-99-540-8919

4730-99-540-8922

4730-99-730-6240
Multiple Connector

4730-99-199-7833
Fluid Passage Bolt

4730-99-204-0549

4730-99-203-1055

4730-99-203-2280
Packing Nut

4730-99-208-7861
Quick Coupling Half

4730-99-214-0976
Pipe To Tube Elbow

4730-99-943-3546
Screwed Plug

4730-99-820-1814

4730-99-807-4765

4730-99-136-9532

4730-99-151-0328
Pipe Straight Adapter

4730-99-534-3570
Sediment Strainer Element

995343570
099080143: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-995-5724
Pipe Nipple

999955724
ND2942: RNCC: 3 | RNVC: 2

24 Feb 2006

4730-99-984-8389
Hydraulic System Accessories Manifold

999848389
PE34906: RNCC: 3 | RNVC: 2

16 Dec 2011

4730-99-993-0178
Special Adaptor

999930178
1265: RNCC: 3 | RNVC: 2
DP11269: RNCC: 5 | RNVC: 2
DP11269: RNCC: 5 | RNVC: 2

17 Sep 1999

4730-99-991-1928
Pipe Coupling

999911928
ST10474X326: RNCC: 3 | RNVC: 2
CV174462: RNCC: 5 | RNVC: 2

21 Nov 2011

4730-99-314-5668
Quick Disconnect Coupling Half

993145668
FV 2096548: RNCC: 3 | RNVC: 2
10-605-6211: RNCC: 5 | RNVC: 1
FV 2096548: RNCC: 5 | RNVC: 2

28 Aug 1991

4730-99-400-6483
Pipe Flange

994006483
6095649: RNCC: 3 | RNVC: 2
6095649: RNCC: 5 | RNVC: 2
81671510009: RNCC: 5 | RNVC: 2
22049: RNCC: 5 | RNVC: 2

21 Oct 2009

4730-99-560-6316
Fluid Passage Bolt

995606316
BM31760: RNCC: 3 | RNVC: 1
DM314721TEM10: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-996-4183
Adapter Outlet

999964183
ND 29966: RNCC: 3 | RNVC: 2

16 Aug 2005

4730-99-526-4318
Sediment Strainer Element

995264318
099040102: RNCC: 3 | RNVC: 2
H677-526-4318: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-216-3113
Pipe Bushing

992163113
AP0602: RNCC: 3 | RNVC: 2

4 Jul 2013

4730-99-203-8233
Lubrication Fitting

4730-99-203-7226

4730-99-203-6882
Pipe Straight Adapter

4730-99-428-8314

4730-99-513-3492

4730-99-524-6963

4730-99-203-7127
Adaptor

4730-99-203-8119
Tube Nipple

4730-99-431-3296

4730-99-422-9190
Pressure Gaug Elbow

994229190
NO PRIMARY REF 99-422-9190: RNCC: 3 | RNVC: 2
GM3273-1: RNCC: 5 | RNVC: 2
4F1741: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-775-1289
Pipe Tee

997751289
1074 SO63: RNCC: 3 | RNVC: 2
103/1066 SO63: RNCC: 5 | RNVC: 2
103/1074 SO63: RNCC: 5 | RNVC: 2
H926-248408: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-820-8069
Pipe Nipple

998208069
C7: RNCC: 3 | RNVC: 1
BS1387: RNCC: 4 | RNVC: 1
LV8REM1CRSC23-1-8: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-726-5316
Pipe Elbow

997265316
EBM04: RNCC: 3 | RNVC: 2
NUAD90-4: RNCC: 5 | RNVC: 2
CV182138: RNCC: 5 | RNVC: 2

12 Apr 2011

4730-99-823-1123
Pipe To Tube Straight Adapter

998231123
3000394: RNCC: 3 | RNVC: 2
04180-16: RNCC: 5 | RNVC: 2
H119-3: RNCC: 5 | RNVC: 2
515806: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-629-0703
Quick Disconnect Coupling Half

996290703
HTE8162F: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-521-5287
Fluid Passage Bolt

995215287
UL16568: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-495-6804
Pipe To Tube Straight Adapter

994956804
6463: RNCC: 3 | RNVC: 2
274005100: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-572-6632
Pipe Union

995726632
SD 622/1: RNCC: 3 | RNVC: 2

11 Jul 2011

4730-99-783-5677
Coupling

997835677
1346407: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-782-9692
Pipe Elbow

997829692
25231-404: RNCC: 3 | RNVC: 2
BS143&1256 TABLE 11: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-273-0232
Tube Air Vent Assem

992730232
EU52792A: RNCC: 3 | RNVC: 2

27 Feb 2007

4730-99-391-1805
Quick Disconnect Coupling Half

993911805
LL4KP26: RNCC: 3 | RNVC: 2

26 May 2004

4730-99-230-7923
Tube Reducer

992307923
79902070: RNCC: 3 | RNVC: 2
FT550388: RNCC: 5 | RNVC: 2
2500601825: RNCC: 5 | RNVC: 2

19 Sep 2011

4730-99-629-6725
Hose Clamp

996296725
900591B2C: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-724-6737
Pipe To Tube Straight Adapter

997246737
NC32596: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-588-1011
Sediment Strainer

995881011
46FN: RNCC: 3 | RNVC: 1

12 May 1994

4730-99-733-8595
Hose Clamp

997338595
84710326: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-944-2329
Pipe Tee

4730-99-944-1236

4730-99-944-1449

4730-99-809-5615

4730-99-804-7952
Pipe Straight Adapter

4730-99-808-2234

4730-99-808-4009

4730-99-807-5249
Hose Clamp

4730-99-807-0177

4730-99-808-4016

4730-99-809-8033

4730-99-807-4735
Pipe Straight Adapter

4730-99-807-8103
Union Nut

4730-99-807-7692

4730-99-808-1261

4730-99-809-6266

4730-99-822-7232
Union Nut

4730-99-727-0312
Sediment Strainer

997270312
M:T1:57:5085: RNCC: 3 | RNVC: 2
7950371: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-727-4539
Conn Rib 1 Transfer

997274539
M2825057020100: RNCC: 3 | RNVC: 2

11 Apr 2013

4730-99-560-2732
Pipe Union

995602732
S2724-1: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-554-5215
Tube Tee

995545215
25MHD: RNCC: 3 | RNVC: 1
002567038: RNCC: 5 | RNVC: 1
MCM/171/04/001: RNCC: 5 | RNVC: 1
002567038 ITEM 99: RNCC: 5 | RNVC: 2
MCM/171/04/001 ITEM 99: RNCC: 5 | RNVC: 2
MCM/171/04/001/99: RNCC: 5 | RNVC: 2
25MHD/38 MM X 38 MM X 30 MM: RNCC: 5 | RNVC: 2
25MHD: RNCC: 5 | RNVC: 9
25MHD/38 MM X 38 MM X 30 MM: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-538-6054
Pipe Flange

995386054
P292-06-0547: RNCC: 3 | RNVC: 2
004-307-538: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-606-1367

4730-99-708-7003
Elbow Nipple

997087003
13933872: RNCC: 3 | RNVC: 2
VOE13933872: RNCC: 5 | RNVC: 2
CV143550: RNCC: 5 | RNVC: 2

9 Jun 2011

4730-99-538-4120
Pipe Straight Adapter

4730-99-790-0378
Pipe Flange

997900378
MF/01209/CN/001: RNCC: 3 | RNVC: 2
004465248: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-533-8480
Pipe Flange

995338480
UX8397: RNCC: 3 | RNVC: 2
UX8397/RRA: RNCC: 5 | RNVC: 2
734-282773: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-537-4773
Plug;Blanking

995374773
NO PRIMARY REF 99-537-4773: RNCC: 3 | RNVC: 2
32BPGR: RNCC: 5 | RNVC: 2
730122: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-529-7106
Pipe Reducer

995297106
1: RNCC: 3 | RNVC: 1

25 Apr 1991

4730-99-732-4268
Pipe Reducer

997324268
13Y54800201277000: RNCC: 3 | RNVC: 2
Y54800201277000: RNCC: 5 | RNVC: 1
M.W.1277: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-813-0494
Pi Straight Adaptor

998130494
N11D2N: RNCC: 3 | RNVC: 2
400166: RNCC: 5 | RNVC: 2
90360302: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-798-7717
Pipe To Hose Elbow

997987717
SA76675: RNCC: 3 | RNVC: 2
SA76675C: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-798-7716
Pipe To Hose Elbow

997987716
SA76674: RNCC: 3 | RNVC: 2
SA76674C: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-814-0496
Manifold Assembly

998140496
FV 742442: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-798-7779
Quick Disconnect Coupling Half

997987779
FV2028167: RNCC: 3 | RNVC: 2

17 Dec 1985

4730-99-800-9812
Union Nut

998009812
Z36HP07: RNCC: 3 | RNVC: 2
24545: RNCC: 5 | RNVC: 2
900845: RNCC: 5 | RNVC: 2
K900845: RNCC: 5 | RNVC: 2
37H1749: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-779-6667
Pipe Tee

997796667
9611: RNCC: 3 | RNVC: 1
08055: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-804-1392
Socket

998041392
11499899: RNCC: 3 | RNVC: 2

12 Aug 1999

4730-99-807-8676
Pipe To Tube Straight Adapter

998078676
E342: RNCC: 3 | RNVC: 2
LV6MT12KSE342: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-957-4998
Sediment Strainer

999574998
F 800: RNCC: 3 | RNVC: 1
11580: RNCC: 5 | RNVC: 2

9 Apr 1997

4730-99-846-6424
Conn Rib 3 Transfer

998466424
M2825057220100: RNCC: 3 | RNVC: 2

11 Apr 2013

4730-99-773-9788
Pipe Tee

997739788
EN10241: RNCC: 4 | RNVC: 1
BSEN10241: RNCC: 5 | RNVC: 1
BS1740: RNCC: 5 | RNVC: 9
BS1740 PART 1: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-823-6885
Tube To Boss Straight Adapter

998236885
FV 738379: RNCC: 3 | RNVC: 2
FV 735622-6: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-741-7444
Pipe To Hose Straight Adapter

997417444
G99539: RNCC: 3 | RNVC: 9
63774U: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-200-0021
Fluid Pressure Line Multiple Connector

992000021
HC40764-4: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-133-9920
Flange To Pipe Straight Adapter

991339920
59832: RNCC: 3 | RNVC: 2

7 Nov 2007

4730-99-660-3010
Pipe Nipple

996603010
1B/4: RNCC: 3 | RNVC: 2
1B/4: RNCC: 5 | RNVC: 2
FV2252451: RNCC: 5 | RNVC: 2
ID2413: RNCC: 6 | RNVC: 9

21 May 1992

4730-99-321-5672
H Manifold Assembly

4730-99-558-2821
Hose Clamp

995582821
5: RNCC: 3 | RNVC: 1

25 Apr 1991

4730-99-205-4477
Pipe Tee

992054477
BS143: RNCC: 4 | RNVC: 1
J61: RNCC: 5 | RNVC: 2
8735174: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-248-5582
Tube Reducer

992485582
PFM 164: RNCC: 3 | RNVC: 2
PFM 164: RNCC: 5 | RNVC: 2

29 May 2013

4730-99-946-7707
Union Tailpiece

999467707
CM4549H: RNCC: 3 | RNVC: 2
Y2632928-6: RNCC: 5 | RNVC: 2
Y2632928-6: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-720-8485
Fluid Passage Bolt

997208485
CM42829: RNCC: 3 | RNVC: 2
CM42827 ITEM 3: RNCC: 5 | RNVC: 2

28 Jun 1991

4730-99-748-0512
Pipe Plug

997480512
716.1.74.156.1: RNCC: 3 | RNVC: 2
FJ961AC0002: RNCC: 6 | RNVC: 9

1 Aug 1996

4730-99-414-3117
Pipe To Tube Straight Adapter

994143117
06057Y002: RNCC: 3 | RNVC: 2
27Q18977: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-607-6077
Union Nut

996076077
B480108: RNCC: 3 | RNVC: 2
00-368-8177: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-479-6773
Soil Pipe Coupling

994796773
SH44BR: RNCC: 3 | RNVC: 2
2500601546: RNCC: 5 | RNVC: 2
79411916: RNCC: 5 | RNVC: 2

23 Nov 2011

4730-99-520-8787
Pipe To Tube Straight Adapter

995208787
UL16611B: RNCC: 3 | RNVC: 2
UL166111SSUE1B: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-454-8185
Special Union

994548185
562486: RNCC: 3 | RNVC: 2

9 Nov 2005

4730-99-244-6858
Tube Cap

4730-99-914-1399
Self- Coupling Half

4730-99-251-1089

4730-99-244-7223
Pipe Straight Adapter

4730-99-591-3406
Flange

4730-99-954-7693

4730-99-540-9138

4730-99-894-0250

4730-99-618-5158
Multiple Connector

4730-99-172-9150
Pipe Nipple

4730-99-799-2837
Pipe Coupling

997992837
SSN02/513/815/22: RNCC: 3 | RNVC: 2
513/815/22: RNCC: 5 | RNVC: 1
H926-362164: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-977-3358
Sho Blanking Nipple

999773358
AS43026-22: RNCC: 2 | RNVC: 2
PAN4056-22: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-528-7440
Retaining Nut

995287440
SF/122/CN/003/006: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-613-6898
Pipe Elbow

996136898
ST04934X654: RNCC: 3 | RNVC: 2
CV174398: RNCC: 5 | RNVC: 2

22 Nov 2011

4730-99-455-3056
Fluid Passage Bolt

994553056
32184422: RNCC: 3 | RNVC: 2

4 May 2001

4730-99-524-6870
Hose Clamp

995246870
21825199: RNCC: 3 | RNVC: 2

11 Dec 1996

4730-99-535-7134
Fl Straight Adapter

995357134
S3S18331174: RNCC: 3 | RNVC: 2

21 Dec 1996

4730-99-601-5868
Tube Fitting Brazing Ferrule

996015868
6E4S3333: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-449-7622

4730-99-764-4304
Pipe Plug

997644304
147-1-2IN: RNCC: 3 | RNVC: 2
ST20354: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-136-0819
Hose Elbow

991360819
64441-8: RNCC: 3 | RNVC: 2
15W40020: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-804-5111
Union Nut

4730-99-801-1131

4730-99-815-9783

4730-99-804-2183

4730-99-804-2114
Pipe Union

4730-99-075-4073
Bulkhead Connector

990754073
FV2094191: RNCC: 3 | RNVC: 2

17 Feb 1992

4730-99-662-7412
Nut And Cone Nipple

996627412
SF/123/CN/002/001 AND 002: RNCC: 3 | RNVC: 2
004461687: RNCC: 5 | RNVC: 1
SF/123/CN/002: RNCC: 5 | RNVC: 1
SF/123/CN/002/001-002: RNCC: 5 | RNVC: 2

25 Aug 1995

4730-99-542-1622
Pipe Reducer

995421622
010-02085: RNCC: 3 | RNVC: 2
560-053209: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-531-1978
Adaptor Assembly

995311978
1005804SH02: RNCC: 3 | RNVC: 2
JIN57/111: RNCC: 5 | RNVC: 1
SDN 001005804: RNCC: 5 | RNVC: 1
153-261SH2: RNCC: 5 | RNVC: 2
G0434: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-255-1283
Pipe Tee

992551283
FFFT-28X28X15/304S15OXYGEN CLEAN: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-787-0512
Bellows:Flexible

997870512
RB.16/0800: RNCC: 3 | RNVC: 2
3129: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-772-9673
Thrust Wire Nut

997729673
AS43044-18: RNCC: 2 | RNVC: 2
PAN4046-18: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-134-6253
Union Nut

4730-99-560-5639
Pipe Union

4730-99-185-5472
Tube Coupling Nut

991855472
9NM 122 477 007: RNCC: 3 | RNVC: 2
POG115316: RNCC: 5 | RNVC: 2

24 Aug 2011

4730-99-152-4495
Pipe To Tube Straight Adapter

991524495
FV 2149325: RNCC: 3 | RNVC: 2
FV 2149325: RNCC: 5 | RNVC: 2
00334: RNCC: 6 | RNVC: 9

29 Aug 1991

4730-99-668-4439
Hose Clamp

996684439
2481873: RNCC: 3 | RNVC: 2

3 May 2012

4730-99-539-9755
Pipe Cross

995399755
AGS1126-6: RNCC: 2 | RNVC: 2

25 Apr 1991

4730-99-137-0362
Ho Swivel Nut Elbow

991370362
980006-4: RNCC: 3 | RNVC: 2
33C90004: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-254-2746
Pipe Repair Clamp

992542746
131X3: RNCC: 3 | RNVC: 2
1-3-131: RNCC: 5 | RNVC: 2
131X75: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-254-2752
Pipe Repair Clamp

992542752
300X150W.A/T.L.G: RNCC: 3 | RNVC: 2
300X6W.A/T.L.G: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-538-4856
Pi Straight Adapter

995384856
E11905-5: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-983-0004
Lubrication Fitting

999830004
120-6: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-946-7059
Hose Cap

999467059
AVA208F: RNCC: 3 | RNVC: 1
Y2632926-5: RNCC: 5 | RNVC: 1
Y2632926-5: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-420-3174
Tube Tee

994203174
T481D: RNCC: 3 | RNVC: 2
0254-17649: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-419-9020
Orifice

994199020
92539428: RNCC: 3 | RNVC: 2

13 Sep 2001

4730-99-204-8913
Fluid Passage Bolt

992048913
269996: RNCC: 3 | RNVC: 2
CE115: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-227-6605
Connector

992276605
M2825051320100: RNCC: 3 | RNVC: 2

15 Mar 2012

4730-99-469-7340
Lubricator

994697340
GG337: RNCC: 3 | RNVC: 2
77512280: RNCC: 5 | RNVC: 2
Y77512280: RNCC: 5 | RNVC: 2
27HR3782: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-748-6296
R Hose Assembly Set

4730-99-591-3507
Adaptor

4730-99-550-6504

4730-99-573-1856
Elbow

4730-99-103-9939
Pipe To Tube Straight Adapter

991039939
A79644: RNCC: 3 | RNVC: 2
27K1743: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-562-2035
Hose Coupling And D

995622035
40MMFLB150B/DP150B: RNCC: 3 | RNVC: 1

25 Apr 1991

4730-99-548-9715
Pipe Tee

995489715
SF324AB117M0D1078WD135: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-212-1552
Strai Backing Plate

992121552
MWIB300: RNCC: 3 | RNVC: 2

25 Jun 1999

4730-99-203-7703
Pipe Elbow Adaptor

992037703
17119: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-549-2020
Boss

4730-99-352-5308
Plug

4730-99-527-7354

4730-99-202-7705

4730-99-148-7747

4730-99-728-6086
Packing Body

997286086
317506: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-728-9030
Tube Union

997289030
4RU2: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-731-9676
Hose Coupling

997319676
HA04A02NU: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-732-6865
Quick Disco Adapter

997326865
ACA6923: RNCC: 3 | RNVC: 2

20 Dec 2010

4730-99-740-5345
Fluid Pressure Line Multiple Connector

997405345
NLA551: RNCC: 3 | RNVC: 2

28 Mar 1992

4730-99-736-5533
Pipe Elbow

997365533
NDK7885: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-750-7480
Pipe To Tube Straight Adapter

997507480
2979K015: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-805-2093
Pipe To Tube Straight Adapter

998052093
FV644021: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-805-1700
Tube-Hose Fitting Compression Sleeve

998051700
F1002: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-762-0850
Pipe Bushing

997620850
355 851 X1: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-753-6427
Rake Assembly

997536427
XP73093: RNCC: 3 | RNVC: 2

9 Jul 2009

4730-99-604-0417
Pi Straight Adapter

996040417
F291600: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-467-2858
Pipe Swivel Joint

994672858
A1R103564: RNCC: 3 | RNVC: 2
27M13898: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-814-8323
Pipe To Tube Straight Adapter

998148323
64473623: RNCC: 3 | RNVC: 2
250865: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-589-2179
Coupling

995892179
86033013: RNCC: 3 | RNVC: 2
TT7777795: RNCC: 6 | RNVC: 9

15 Jan 2002

4730-99-282-9620
Tee Piece

992829620
020067965-MS9268: RNCC: 3 | RNVC: 2

8 Oct 2003

4730-99-320-5098
Tube Cross

993205098
111 151 0901/7: RNCC: 3 | RNVC: 2
030101 R1 DL04351: RNCC: 5 | RNVC: 2

7 Sep 2009

4730-99-772-6555
N Connecting Sleeve

4730-99-141-8835
Adapter

991418835
530.059.0014: RNCC: 3 | RNVC: 2
530.059.0014: RNCC: 6 | RNVC: 9
992K90049: RNCC: 6 | RNVC: 9

16 Feb 2000

4730-99-611-3659
Pipe Flange

996113659
NB13388: RNCC: 3 | RNVC: 1

25 Apr 1991

4730-99-110-0883
Pipe To Tube Straight Adapter

991100883
97 1517 47: RNCC: 3 | RNVC: 2
A18602: RNCC: 5 | RNVC: 2

22 May 1992

4730-99-626-6922
Pipe Reducer

996266922
EH9572: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-449-6061

4730-99-455-3823

4730-99-455-3844

4730-99-526-4733
Pipe Plug

4730-99-990-8420
Pipe Elbow

999908420
192: RNCC: 3 | RNVC: 1
BS143: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-981-6455
Fluid Flow Restrictor

999816455
66MZ93A: RNCC: 3 | RNVC: 2

19 May 2004

4730-99-303-4101
Hydraulic System Accessories Manifold

993034101
153127200: RNCC: 3 | RNVC: 2

11 Apr 2012

4730-99-438-2959
Pipe Locknut

994382959
12018686: RNCC: 3 | RNVC: 2
2500602575: RNCC: 5 | RNVC: 2

27 Jun 2011

4730-99-461-5900

4730-99-352-7889

4730-99-350-2910
Pipe Straight Adapter

4730-99-254-6455
Cover Plate

4730-99-201-8447
Pipe To Tube Straight Adapter

992018447
33555128: RNCC: 3 | RNVC: 2
0206008: RNCC: 5 | RNVC: 2
722637: RNCC: 5 | RNVC: 2
93357: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-420-4520
Pipe To Tube Straight Adapter

994204520
819811: RNCC: 3 | RNVC: 2
27Q24474: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-596-9360
Strainer Assembly

995969360
448100104: RNCC: 3 | RNVC: 1

3 Jun 1999

4730-99-280-2424
Tube Tee

992802424
11.846.307 ABS PN10 25: RNCC: 3 | RNVC: 2

12 May 2004

4730-99-844-1519
Double-Ended Union

998441519
0A65: RNCC: 3 | RNVC: 2
LV7SL0A65: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-837-1112
Pipe Nipple

998371112
937538: RNCC: 3 | RNVC: 2
CV186137: RNCC: 5 | RNVC: 2
VOE937538: RNCC: 5 | RNVC: 2

20 Jun 2011

4730-99-846-0655
Quick Disconnect Coupling Half

998460655
0234WAP-03: RNCC: 3 | RNVC: 2
CV189793: RNCC: 5 | RNVC: 2

24 Jun 2011

4730-99-865-6837
Tube Tee

998656837
FV525550: RNCC: 3 | RNVC: 2
LV9ACRFV525550: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-864-6457
Tube Reducer

998646457
FV 2095245: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-837-1025
Flange To Tube Elbow

998371025
14387391: RNCC: 3 | RNVC: 2
CV183140: RNCC: 5 | RNVC: 2
VOE14387391: RNCC: 5 | RNVC: 2

10 Jun 2011

4730-99-152-2041
Pipe Cap

991522041
12017865: RNCC: 3 | RNVC: 2
2500602484: RNCC: 5 | RNVC: 2

27 Jun 2011

4730-99-837-3507
Connector

998373507
M2825022520000: RNCC: 3 | RNVC: 2

10 Feb 2012

4730-99-254-5255
Pipe Reducer

992545255
1024034: RNCC: 3 | RNVC: 2

27 Oct 2010

4730-99-027-0429
Lubricating Nipple

990270429
FV 2060776: RNCC: 3 | RNVC: 2

28 Jun 1989

4730-99-541-0640
Special Nipple

995410640
001000816: RNCC: 3 | RNVC: 1
GD1337: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-560-6739
Pipe To Tube Straight Adapter

995606739
CM34975: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-717-1660
Fluid Flow Restrictor

997171660
BA57736: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-714-9947
Fluid Passage Bolt

997149947
871024: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-874-3402
Hose Clamp

4730-99-773-9635
Pipe To Tube Straight Adapter

997739635
1066 CA45: RNCC: 3 | RNVC: 2
1R GHD: RNCC: 5 | RNVC: 1
1066/CA45: RNCC: 5 | RNVC: 2
H926-233724: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-535-7143
Self-Sealing Coupling Half

995357143
2454H000-001: RNCC: 3 | RNVC: 2

7 Oct 2000

4730-99-254-2038
Skin Fitting

992542038
MCM/311/01/002: RNCC: 3 | RNVC: 2
002568119: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-912-8224
Flange To Tube Elbow

999128224
70-80-442: RNCC: 3 | RNVC: 2
DML040196: RNCC: 5 | RNVC: 2

25 Jun 2007

4730-99-774-6858
Pipe Coupling

997746858
1062/C466: RNCC: 3 | RNVC: 2
926-185131: RNCC: 6 | RNVC: 9
H926-185131: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-777-4486
Pipe Assembly

997774486
WG1373-0155-047: RNCC: 3 | RNVC: 2
85-690-1799: RNCC: 6 | RNVC: 9

20 Dec 1984

4730-99-226-6719
Hose

992266719
NO PRIMARY REF 99-226-6719: RNCC: 3 | RNVC: 2
5265860-81: RNCC: 5 | RNVC: 2

3 Feb 2010

4730-99-745-1584
Pipe Reducer

997451584
MF/01004/AZ/127/00: RNCC: 3 | RNVC: 2
004472614: RNCC: 5 | RNVC: 2

23 Mar 1996

4730-99-613-8360
Flange To Hose Straight Adapter

996138360
1048A-A FB: RNCC: 3 | RNVC: 2

5 Feb 2013

4730-99-104-3822
Tube Nipple

991043822
2425: RNCC: 3 | RNVC: 2
36DE129: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-457-2703
Adaptor

994572703
454550: RNCC: 3 | RNVC: 2

6 Sep 1991

4730-99-769-0277
Pipe To Tube Straight Adapter

997690277
MF/01008/AZ/014: RNCC: 3 | RNVC: 2
004464479: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-786-4181
Pipe Flange

997864181
MF/01008/SL/002: RNCC: 3 | RNVC: 2
004-463-847/01: RNCC: 5 | RNVC: 1
004463847/01: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-738-8163
Pipe Tee

997388163
SF/324/CN/140: RNCC: 3 | RNVC: 2
004461605/01: RNCC: 5 | RNVC: 1
SF/00324/CN/140: RNCC: 5 | RNVC: 2
H926-454924: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-800-7864
Tube Cross

998007864
34013104: RNCC: 3 | RNVC: 2
34-0131-04: RNCC: 5 | RNVC: 2
5031-04: RNCC: 5 | RNVC: 2
Y53: RNCC: 5 | RNVC: 2
34-0131-04: RNCC: 6 | RNVC: 9
LV6MT1ENY53: RNCC: 6 | RNVC: 9

9 Jul 1990

4730-99-355-4715
Air Line Manifold

993554715
25743540: RNCC: 3 | RNVC: 2
1RT-1RT072-AH: RNCC: 5 | RNVC: 2
1RT-1RT072-LP: RNCC: 5 | RNVC: 2
HT2804 REF B2A 2061: RNCC: 5 | RNVC: 2

31 Aug 2010

4730-99-442-5098
Double-Ended Union

994425098
KRA6CR: RNCC: 3 | RNVC: 2
A6CR: RNCC: 5 | RNVC: 2
001U4-485: RNCC: 6 | RNVC: 9
6NB1247: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-684-4462
Hose Tee

996844462
1304930: RNCC: 3 | RNVC: 2
CV124480: RNCC: 5 | RNVC: 2

14 Jun 2010

4730-99-534-8346
Pipe To Tube Straight Adapter

995348346
2028519: RNCC: 3 | RNVC: 2
004002548: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-206-2410
Male Connector

992062410
16543: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-660-8114
Adaptor

996608114
3910: RNCC: 3 | RNVC: 2
LUM-RB42: RNCC: 5 | RNVC: 2

2 Mar 1994

4730-99-028-4687
Tube Reducer

990284687
EU68697: RNCC: 3 | RNVC: 2

4 Dec 1991

4730-99-811-4754
Tube Coupling Inverted Nut

998114754
142435: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-810-1730
Tube Coupling

998101730
DBC-M6-SD: RNCC: 3 | RNVC: 2

8 Aug 1991

4730-99-811-1552
Tube Elbow

998111552
EEM25316: RNCC: 3 | RNVC: 2
WE128B: RNCC: 6 | RNVC: 9

19 Sep 1997

4730-99-724-4397
Pipe Tee

997244397
77820A8: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-522-0765
Adaptor

995220765
FV800922: RNCC: 3 | RNVC: 2
OE50572/M: RNCC: 5 | RNVC: 2

25 May 1995

4730-99-833-8429
Pipe To Tube Straight Adapter

998338429
N4068C11UUNF: RNCC: 3 | RNVC: 2
2750-400: RNCC: 5 | RNVC: 2
N4068C11UNF: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-833-1749
Pipe To Tube Straight Adapter

998331749
203850: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-414-1840

4730-99-547-8080
Tube Reducer

4730-99-437-3228

4730-99-946-7824
Pipe Reducer

4730-99-948-7511

Load More Results