What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Pipe Bend?

A Return Pipe Bend (BEND,PIPE,RETURN) is a fitting designed to join a pipe in a parallel position to another pipe for reversing the flow of gas, steam, air, or liquids. Excludes BEND, SOIL PIPE.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Soil Pipe Reducer?

A Soil Pipe Reducer (REDUCER,SOIL PIPE) is a straight fitting with the spigot end larger than the hub end. It is used to connect two pieces of soil pipe of different size.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Pipe Lateral?

A Pipe Lateral (LATERAL,PIPE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit pipes and/or pipe fittings to be taken off laterally from the main line. It may have side inlet(s).

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Soil Pipe Lateral?

A Soil Pipe Lateral (LATERAL,SOIL PIPE) is a fitting having one or two branches which are fixed at various angles other than 90 degrees to the run. If item has two branches, they will be located on opposite sides of the run (180 degrees apart) and will be identical. It may have side inlets.

What is a Soil Pipe Tee?

A Soil Pipe Tee (TEE,SOIL PIPE) is a fitting consisting of a run and a branch. The branch may be either curved or straight, but the axis of the end connection intersects the axis of the run at right angles. It may have side inlets.

What is a Tube Coupling Inverted Nut?

A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.

What is a Tube Coupling Nut?

A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.

What is an Union Tailpiece?

An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.

What is an Union Thread Piece?

An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - United Kingdom (UK)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by United Kingdom (UK) - NCB is 99

Page 112 of 242

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by United Kingdom

47	30	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - United Kingdom (UK)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 43 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 608 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 26 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 14 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 16 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
What is a Bulkhead Hose Connector? 44 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 123 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 192 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 30 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Cap? 97 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 18 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 1095 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 322 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 1326 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 970 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 64 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Pipe To Hose Straight Adapter? 986 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 8242 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 197 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Pipe Bushing? 294 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Hose Nipple? 57 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 1594 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 953 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 86 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 586 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Tube Union? 47 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 172 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Pipe Bend? 11 Items: A Return Pipe Bend (BEND,PIPE,RETURN) is a fitting designed to join a pipe in a parallel position to another pipe for reversing the flow of gas, steam, air, or liquids. Excludes BEND, SOIL PIPE.
What is a Return Tube Bend? 18 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 33 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 131 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Soil Pipe Reducer? 28 Items: A Soil Pipe Reducer (REDUCER,SOIL PIPE) is a straight fitting with the spigot end larger than the hub end. It is used to connect two pieces of soil pipe of different size.
What is a Pipe Flange? 1150 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Machine Thread Plug? 108 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Pipe Lateral? 30 Items: A Pipe Lateral (LATERAL,PIPE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit pipes and/or pipe fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Tube Lateral? 16 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 122 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 2442 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 18 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 312 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Tube Tee? 892 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Soil Pipe Lateral? 30 Items: A Soil Pipe Lateral (LATERAL,SOIL PIPE) is a fitting having one or two branches which are fixed at various angles other than 90 degrees to the run. If item has two branches, they will be located on opposite sides of the run (180 degrees apart) and will be identical. It may have side inlets.
What is a Soil Pipe Tee? 10 Items: A Soil Pipe Tee (TEE,SOIL PIPE) is a fitting consisting of a run and a branch. The branch may be either curved or straight, but the axis of the end connection intersects the axis of the run at right angles. It may have side inlets.
What is a Tube Coupling Inverted Nut? 365 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Tube Coupling Nut? 113 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is an Union Tailpiece? 217 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 61 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Pipe Swivel Joint? 56 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 525 Items
What is a Sediment Strainer? 692 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 24 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 54 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 16 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 228 Items
What is a Pipe Repair Clamp? 51 Items: A Pipe Repair Clamp (CLAMP,REPAIR,PIPE) is a one-piece or two-piece metal clamp generally used with gasket(s) and designed to repair longitudinal splits and pit holes and/or to support thin walls in a straight run of pipe. See also CLAMP, LEAK REPAIR, PIPE COUPLING.
What is a Pipe Cap? 247 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 238 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 14 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 1072 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 1811 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 551 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
What is a Hose Reducer? 41 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 2097 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 1319 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Pipe Cross? 115 Items: A Pipe Cross (CROSS,PIPE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is designed to be used as a junction at the intersection of pipe and/or pipe fittings.
What is a Pipe To Tube Cross? 58 Items: A Pipe To Tube Cross (CROSS,PIPE TO TUBE) is a fitting having four branches in the same plane whose axes form right angles. One or more of the connections have standard pipe threads or are unthreaded and designed to accommodate a pipe. The remaining connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It may have side inlet(s).
What is a Tube Cross? 86 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Spool Piece? 28 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Water Closet Bend? 10 Items: A Water Closet Bend (BEND,WATER CLOSET) is a waste line fitting designed for use with a water closet, to provide a means of connecting a water closet bowl to a waste line.
What is a Pipe Locknut? 74 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 21 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Drainage Pipe Lateral? 23 Items: A Drainage Pipe Lateral (LATERAL,DRAINAGE PIPE) is a fitting having one or two branches which are fixed at various angles other than 90 degrees (1.5705 radians) to the run. It is used as a junction at the intersection of a drainage line and is provided with a shoulder(s) at the end(s) of its internal threaded or unthreaded portion, conforming to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It may have side inlet(s).
What is a Hose Clamp? 1782 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is a Fuel Feeder Manifold? 10 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Soil Pipe Plug? 10 Items: A Soil Pipe Plug (PLUG,SOIL PIPE) is a fitting designed to fit into the hub end of soil pipe or a soil pipe fitting for sealing.
What is a Pipe Clamp Coupling? 59 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is an Air Line Manifold? 48 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 17 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 153 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 186 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 570 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 70 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 522 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 24 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 565 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Elbow Assembly? 11 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Fluid Flow Restrictor? 857 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 36 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Self-Sealing Coupling Half? 218 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 11 Items
What is a Drainage Pipe Elbow? 29 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Pipe True Wye? 40 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 20 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 24 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Sediment Strainer Element? 1052 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 1394 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 1435 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1839 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 139 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is an Union Nut? 1395 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Quick Disconnect Coupling Assembly? 63 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 63 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 20 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Magnetic Pipe Plug? 43 Items: A Magnetic Pipe Plug (PLUG,PIPE,MAGNETIC) is a pipe fitting primarily designed for installation in a lubrication or hydraulic system. It has an integral magnet in the body and external pipe threads.
What is a Hose To Boss Straight Adapter? 51 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 242 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 473 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 37 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 13 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Pipe To Boss Elbow? 20 Items: A Pipe To Boss Elbow (ELBOW,PIPE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a pipe or pipe fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like. See also ELBOW, PIPE; and ELBOW, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Boss Elbow? 66 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 44 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Pipe To Boss Tee? 10 Items: A Pipe To Boss Tee (TEE,PIPE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a pipe or pipe fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Tube To Boss Tee? 35 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 59 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Boss Nipple? 29 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Pipe Outlet? 23 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 23 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 26 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Hose Straight Adapter? 110 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 86 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 57 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Flange Elbow? 169 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 11 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 18 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Pipe Elbow? 65 Items: A Flange To Pipe Elbow (ELBOW,FLANGE TO PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 118 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Flange Tee? 38 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Soil Pipe Coupling? 21 Items: A Soil Pipe Coupling (COUPLING,SOIL PIPE) is a straight fitting used to connect two pieces of soil pipe of the same size.
What is a Quick Disconnect Plug? 17 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Suction Strainer? 51 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Coupling Swage Ferrule? 19 Items: A Tube Coupling Swage Ferrule (FERRULE,SWAGE,TUBE COUPLING) is a flanged cylindrical metallic item used with a plain end tube and swaged in place. It is designed to be used as a component part of a flexible or rigid tube coupling.
What is a Tube Fitting Insert? 10 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Fluid-Emulsion Spray Nozzle? 46 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 10 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 12 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 11 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Quick-Disconnect Nipple? 12 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is an Exhaust-Intake Pneumatic Muffler? 23 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Flange To Flange Straight Adapter? 29 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
Connector,Tubing,Straight 28 Items
What is a Hydraulic Manifold Assembly? 264 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Tube Swivel Joint? 20 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
Adapter,Check Valve 11 Items
Nipple,Special 34 Items
Adapter Assembly,Valve 18 Items
Adapter And Flange Assembly 17 Items
What is a Tube Coupling Assembly? 18 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 65 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Special-Shaped Hose Clamp? 15 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Pipe To Tube Swivel Joint? 21 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Tube Fitting Compression Ferrule? 60 Items: A Tube Fitting Compression Ferrule (FERRULE,COMPRESSION,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be slipped over tubing. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled, the joint seals at the seat in a manner similar to a seat type union.
What is a Pipe Fitting Flared Collar? 39 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 590 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 63 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 53 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Hydraulic Swivel Joint? 54 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 209 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.

Stock Items From Supply Class 4730 Page 112 of 242

4730-99-784-6247

4730-99-788-1369

4730-99-823-4959
Pipe Reducer

4730-99-824-0182

4730-99-776-8276
Pipe Straight Adapter

4730-99-771-7152

4730-99-777-2017

4730-99-777-1134

4730-99-777-0648
Pipe Reducer

4730-99-420-3215
Pipe To Tube Straight Adapter

994203215
2: RNCC: 3 | RNVC: 2
0254-254063: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-256-5539
Male Coupling Stud

992565539
0024146: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-223-1673
Double-Ended Union

992231673
F189: RNCC: 3 | RNVC: 9

25 Apr 1991

4730-99-660-7839
Collar

4730-99-547-6065
Hose Clamp

995476065
A820X8287EA: RNCC: 3 | RNVC: 2
5009881: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-225-8765
Pipe To Tube Straight Adapter

992258765
102250818: RNCC: 3 | RNVC: 2

31 Jul 2004

4730-99-944-9474
Pipe To Tube Straight Adapter

999449474
M2566314-6: RNCC: 3 | RNVC: 2
M2566314-6: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-836-1820
Tube-Hose Fitting Compression Sleeve

998361820
579168: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-724-6749
Pipe Plug

997246749
C-6761: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-724-2024
Flow Divider

997242024
QV50003440-2: RNCC: 3 | RNVC: 2
2CFD50-40S: RNCC: 5 | RNVC: 2

6 Mar 2003

4730-99-621-9641

4730-99-780-3820

4730-99-787-9631

4730-99-777-7741
Pipe Tee Adaptor

4730-99-780-4913
Gland

4730-99-744-4067
Pipe Coupling

4730-99-738-9883

4730-99-751-0056
Pipe Straight Adapter

4730-99-783-1910
Pipe Flange

4730-99-780-3833

4730-99-738-9171
Tube Coupling

4730-99-808-3964

4730-99-738-9946

4730-99-795-9027
Pipe Elbow Adaptor

4730-99-751-0295

4730-99-787-5394

4730-99-634-0854

4730-99-745-5929
Pipe Union

4730-99-634-0736
Packing Nut

4730-99-773-9602

4730-99-790-7646
Pipe Tee Adaptor

4730-99-805-5135

4730-99-808-4754
Tube Nipple

4730-99-777-7617

4730-99-738-9177
Circuit Block Manif

4730-99-744-3017

4730-99-780-3823

4730-99-775-1300
Pipe Tee

997751300
1074 SO87: RNCC: 3 | RNVC: 2
103/1066 SO87: RNCC: 5 | RNVC: 2
103/1074 SO87: RNCC: 5 | RNVC: 2
H926-248419: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-548-3587
Pipe To Tube Tee

995483587
AM30-20F0TR: RNCC: 3 | RNVC: 2
529-443523: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-769-0275
Pipe To Tube Straight Adapter

997690275
MF/01001/AZ/066: RNCC: 3 | RNVC: 2
004464384: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-789-4978
Pipe Reducer

997894978
MF/01001/AZ/112: RNCC: 3 | RNVC: 2
004464946: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-530-2377
Pipe Tee

995302377
SF/324/CN/007: RNCC: 3 | RNVC: 2
004461474: RNCC: 5 | RNVC: 2
SF/324/CP/007: RNCC: 5 | RNVC: 2
SX/W/52/4: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-439-9299
Adaptor Coupling

994399299
11C1-50B: RNCC: 3 | RNVC: 2
MK11C1-50B: RNCC: 5 | RNVC: 2
99-122-6562: RNCC: 6 | RNVC: 9
4GD6717: RNCC: 6 | RNVC: 9
001U4-876: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-324-0122
Tube To Boss Straight Adapter

993240122
SS-12M0-1-8STFL: RNCC: 3 | RNVC: 2
QCA/SS-12M0-1-8STFL: RNCC: 5 | RNVC: 2
QCA/SS-12M0-1-8STFL: RNCC: 5 | RNVC: 2
BFSTL TASK 2 (STAINLESS STEEL): RNCC: 6 | RNVC: 9

6 Jun 2005

4730-99-269-3357
Block Manifold Asse

992693357
23116-193: RNCC: 3 | RNVC: 2

19 Nov 2010

4730-99-608-1691
Sediment Strainer

4730-99-709-5166
Union

997095166
M4715005220100: RNCC: 3 | RNVC: 2

10 Nov 2011

4730-99-726-5719
Flange

997265719
14578834: RNCC: 3 | RNVC: 2
CV184676: RNCC: 5 | RNVC: 2
VOE14578834: RNCC: 5 | RNVC: 2

13 Jun 2011

4730-99-125-9032
Hose Coupling

991259032
3625904: RNCC: 3 | RNVC: 2
3625904: RNCC: 5 | RNVC: 2

9 Nov 1993

4730-99-726-1643
Pipe Reducer

997261643
108: RNCC: 3 | RNVC: 1

25 Apr 1991

4730-99-787-6343
Quick Disconnect Coupling Half

997876343
HTE 8460: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-207-6699
Bend Pipe

992076699
GMD74888: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-702-0447
Tube Coupling

997020447
94 1503 06: RNCC: 3 | RNVC: 2
94 1503 00: RNCC: 5 | RNVC: 1
72-00082-006: RNCC: 5 | RNVC: 2
FJ9512A7166: RNCC: 6 | RNVC: 9

16 Oct 1995

4730-99-839-8194
Pipe To Hose Elbow

998398194
3005182: RNCC: 3 | RNVC: 2
B32061-16: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-788-3913
Pipe Tee

997883913
HAK1252: RNCC: 3 | RNVC: 9

25 Apr 1991

4730-99-562-7259
Fluid Passage Bolt

995627259
FV 2110386: RNCC: 3 | RNVC: 2
FV 2110386: RNCC: 5 | RNVC: 2

15 Jun 1990

4730-99-533-7576
Pipe Flange

995337576
001248900: RNCC: 3 | RNVC: 2
BR3013-2-PT1: RNCC: 4 | RNVC: 1

25 Apr 1991

4730-99-458-9081
Tube Nipple

994589081
L10W: RNCC: 3 | RNVC: 2
AE6614A625: RNCC: 5 | RNVC: 2
L10W: RNCC: 5 | RNVC: 9
6CA2164: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-153-4963
Quick Disconnect Coupling Half

991534963
1712P-A SP: RNCC: 3 | RNVC: 2

11 Feb 2013

4730-99-788-3452
Pipe Nipple

997883452
001271857 1-2 IN: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-762-9723
Connector

997629723
3.409.390: RNCC: 3 | RNVC: 2
3.409.390: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-147-6397
Adapter

991476397
2 0061-208: RNCC: 3 | RNVC: 2

7 Mar 2003

4730-99-782-1334
Hydraulic Pipe

997821334
345 7435: RNCC: 3 | RNVC: 2
RK 60006 S FIGURE 22: RNCC: 5 | RNVC: 2
RK 60006 S FIGURE 22: RNCC: 5 | RNVC: 2
345 7435: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-716-8448

4730-99-630-6413
Pipe Straight Adapter

4730-99-145-1992
Tube Coupling

991451992
004468710: RNCC: 3 | RNVC: 2
MX/01720/NM/034: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-335-4508
Tube Reducer

993354508
MF/01026/CN/003: RNCC: 3 | RNVC: 1
004467267: RNCC: 5 | RNVC: 1
SSTY57000D001000: RNCC: 5 | RNVC: 1
QCA/MF01026CN003: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-790-1086
Pipe Elbow Adaptor

997901086
1074/AC 619: RNCC: 3 | RNVC: 2
AC 619: RNCC: 5 | RNVC: 1
1074 AC 619: RNCC: 5 | RNVC: 2
H926-298489: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-570-6287
Bulkhead Penetratio

995706287
QCA/SSBN01/510.02/401/357: RNCC: 3 | RNVC: 2
F816-924653: RNCC: 6 | RNVC: 9
J852-924653: RNCC: 6 | RNVC: 9
LE463B1: RNCC: 6 | RNVC: 9

9 May 1996

4730-99-667-7858
Fluid Flow Restrictor Unit

996677858
NO PRIMARY REF 99-667-7858: RNCC: 3 | RNVC: 2
068-200600: RNCC: 5 | RNVC: 2
068-200600: RNCC: 5 | RNVC: 9

17 Nov 2010

4730-99-773-9640
Pipe Plug

997739640
1062 WS 30: RNCC: 3 | RNVC: 2
1062/WS 30: RNCC: 5 | RNVC: 2
H926-237994: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-760-4906
Pipe Tee

997604906
QCA/1076/TS453: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-538-7882
Pipeline Flexible Spacer

995387882
001281390 FLEXIBLE 32: RNCC: 3 | RNVC: 1
001281390: RNCC: 5 | RNVC: 1
001281390 SHEET 001: RNCC: 5 | RNVC: 1
001281390/001: RNCC: 5 | RNVC: 1
SSK/Z/520/00/0015: RNCC: 5 | RNVC: 1
SSK/Z/520/00/0015 FLEXIBLE 32: RNCC: 5 | RNVC: 1
SSK/Z/520/00/0015 SHEET 001: RNCC: 5 | RNVC: 1
SSK/Z/520/00/0015/32: RNCC: 5 | RNVC: 1
SSK/Z/520/00/0015 FLEXIBLE 32: RNCC: 5 | RNVC: 1
SSK/Z/520/00/0015/32: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-761-3849
Sleeve

997613849
SSN.02/516/886/5: RNCC: 3 | RNVC: 2
516/886/5: RNCC: 5 | RNVC: 2
H926-227570: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-309-2329
Non-Metallic Connecting Sleeve

993092329
BA6673-149: RNCC: 3 | RNVC: 2
001298673/149: RNCC: 5 | RNVC: 2
SST.Y.520.00.0035.000/149: RNCC: 5 | RNVC: 2
BA6673 ITEM 149: RNCC: 5 | RNVC: 2

24 Jan 1995

4730-99-962-2320
Packing Nut

999622320
AN3919: RNCC: 3 | RNVC: 2
87500022-1: RNCC: 5 | RNVC: 2
N0D3138-48-5: RNCC: 5 | RNVC: 2
197357: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-747-0630
Quick Disconnect Coupling Half

997470630
HTE714-76-V: RNCC: 3 | RNVC: 2
N06905: RNCC: 5 | RNVC: 2

5 Dec 1992

4730-99-792-9862
Pipe Plug

997929862
EN10241: RNCC: 4 | RNVC: 1
BSEN10241: RNCC: 5 | RNVC: 1
172 ITEM 9: RNCC: 5 | RNVC: 2
172/9: RNCC: 5 | RNVC: 2
X5008/12/172/9: RNCC: 5 | RNVC: 2
X5008/12/172 ITEM 9: RNCC: 5 | RNVC: 2
BS1740 PART 1-TABLE 13: RNCC: 5 | RNVC: 9
BS1740:PART 1: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-708-8375
Pi Straight Adapter

997088375
E0396-16-6: RNCC: 3 | RNVC: 2

19 Jul 2000

4730-99-811-3448
Coupl Packing Piece

998113448
B35706-31: RNCC: 3 | RNVC: 2
SR1957/9: RNCC: 5 | RNVC: 2
767-97/149: RNCC: 6 | RNVC: 9

13 Jan 1998

4730-99-780-8870
Tube Fitting Brazing Ferrule

997808870
SSN.12/Y/563/199: RNCC: 3 | RNVC: 2
SD.199: RNCC: 5 | RNVC: 2
Y/563/199: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-782-4849
Brazing Ring

997824849
SSBN.01/115/21/108: RNCC: 3 | RNVC: 2
115/21/108: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-551-5468
Hydraulic Manifold Assembly

995515468
PE24710: RNCC: 3 | RNVC: 2

8 Nov 2007

4730-99-784-6173
Pipe To Tube Straight Adapter

997846173
1066/MS163: RNCC: 3 | RNVC: 1
MS163: RNCC: 5 | RNVC: 1
1066/MS163/7/8IN.UNF: RNCC: 5 | RNVC: 2
H926-914115: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-543-4103
Pipe To Tube Straight Adapter

995434103
M12-4SSAR: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-801-1484
Union Nut

998011484
1041-TDR15F: RNCC: 2 | RNVC: 2
TDR15F: RNCC: 3 | RNVC: 2
LV6MT137441: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-768-3043
Pipe Elbow Adaptor

997683043
N30/24/24S: RNCC: 3 | RNVC: 2
44457-453-00-7: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-780-9958
Tube Fitting Brazing Ferrule

997809958
SSBN.01/115/21/114: RNCC: 3 | RNVC: 2
115/21/114: RNCC: 5 | RNVC: 1
H926-301440: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-530-1306
Tube Fitting Brazing Ferrule

995301306
SSN07Y524-614: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-598-7121
Pipe To Hose Straight Adapter

995987121
SF/067/CG/001: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-365-5220
Connector

993655220
M2825004020000: RNCC: 3 | RNVC: 2

10 Nov 2011

4730-99-629-9772
Hose Clamp

996299772
W525971S301XB: RNCC: 3 | RNVC: 2

15 Nov 1999

4730-99-722-6089
Hydratest Fitting

997226089
HSP76: RNCC: 3 | RNVC: 2
FH9644B0015: RNCC: 6 | RNVC: 9

25 Apr 1996

4730-99-742-1424
Pipe Fitting Insert

997421424
0079169318: RNCC: 3 | RNVC: 2
79169318: RNCC: 5 | RNVC: 2
9169318: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-741-9659
Pipe Reducer

997419659
020 035 621: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-738-6000
Fluid Passage Bolt

997386000
CM39203: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-529-2756
Water Jet Nozzle

995292756
M0D1000-4: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-839-8212
Pipe To Hose Elbow

998398212
3005223: RNCC: 3 | RNVC: 2
B32987-8: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-136-3683

4730-99-553-6445
Connector

995536445
M2825027620000: RNCC: 3 | RNVC: 2

23 May 2012

4730-99-027-0712
Fluid Pressure Line Multiple Connector

990270712
6S 223: RNCC: 3 | RNVC: 2
26DL2934: RNCC: 6 | RNVC: 9

8 Jul 1992

4730-99-229-5413
Conn Rib 14 Xfeed

992295413
M2825063520000: RNCC: 3 | RNVC: 2

16 Feb 2013

4730-99-613-4970
Quick Disconnect Coupling Half

996134970
218-5845: RNCC: 3 | RNVC: 2
CV151854D: RNCC: 5 | RNVC: 2

29 Apr 2010

4730-99-717-1742
Fluid Flow Restrictor

997171742
GP7435: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-828-7498
Pipe To Hose Straight Adapter

998287498
E202-6: RNCC: 3 | RNVC: 2
77819K1: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-148-3395
Seali Plug Assembly

4730-99-785-3152

4730-99-105-7466

4730-99-942-6731
Pipe Reducer

999426731
FWP1260U: RNCC: 3 | RNVC: 2
KGCCFWP1260U: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-639-6927
Flange To Pipe Straight Adapter

996396927
098278: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-411-0942
Self-Sealing Coupling Half

994110942
AVX3393D: RNCC: 3 | RNVC: 2
AVX3393: RNCC: 5 | RNVC: 2
27BA4110942: RNCC: 6 | RNVC: 9
27BA11420: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-352-6870
Return Pipe Bend

993526870
MXK2175: RNCC: 3 | RNVC: 2

12 Apr 1994

4730-99-463-0050
Tube Reducer

994630050
779651: RNCC: 3 | RNVC: 2
FV 2067207: RNCC: 5 | RNVC: 2
FV 2067207: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-837-7238
Hose Elbow

998377238
79HF9K621AA: RNCC: 3 | RNVC: 2
6061645: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-815-3205
Soil Pipe Bend

998153205
WP14W: RNCC: 3 | RNVC: 2
79430180: RNCC: 5 | RNVC: 2
2500601684: RNCC: 5 | RNVC: 2

24 Nov 2011

4730-99-815-2333
Union

998152333
M4715005720100: RNCC: 3 | RNVC: 2

10 Nov 2011

4730-99-815-3166
Soil Pipe Branch

998153166
RCB104BR: RNCC: 3 | RNVC: 2
79410412: RNCC: 5 | RNVC: 2
2500601123: RNCC: 5 | RNVC: 2

24 Nov 2011

4730-99-803-9575
Tube Reducer

998039575
4741736: RNCC: 3 | RNVC: 2
4861704: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-837-8642
Fluid Passage Bolt

998378642
FV932461: RNCC: 3 | RNVC: 2

19 Jul 1984

4730-99-859-2043
Sediment Strainer

998592043
R00003: RNCC: 3 | RNVC: 2

21 May 1999

4730-99-859-1691
Tube Swivel Joint

998591691
ND8190: RNCC: 3 | RNVC: 2

6 Apr 2010

4730-99-815-0464
Flow Spliter

998150464
C6372731: RNCC: 3 | RNVC: 2

31 Oct 2011

4730-99-814-6954
Pipe To Tube Union

998146954
79902871: RNCC: 3 | RNVC: 2
FT554409: RNCC: 5 | RNVC: 2
2500601736: RNCC: 5 | RNVC: 2

20 Sep 2011

4730-99-838-3075
Pipe To Hose Elbow

998383075
11499204: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-815-5286
Pipe To Tube Straight Adapter

998155286
FV701119: RNCC: 3 | RNVC: 2
FV701119: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-813-5697
Tube Cross

998135697
FV 620216: RNCC: 3 | RNVC: 2
FV620216: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-814-5461
Pipe Plug

998145461
12018513: RNCC: 3 | RNVC: 2
2500602521: RNCC: 5 | RNVC: 2

27 Jun 2011

4730-99-856-8544
Hose Clamp

998568544
046 4482: RNCC: 3 | RNVC: 2

3 Nov 2010

4730-99-815-4648
Elbow Assembly

998154648
0PE4: RNCC: 3 | RNVC: 2
BW21647: RNCC: 5 | RNVC: 2
21647: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-842-6657

4730-99-975-8465
Pipe Coupling

4730-99-008-0072
Connector

4730-99-996-0506
Bend

4730-99-123-7605

4730-99-254-2745
Pipe Repair Clamp

992542745
105X3: RNCC: 3 | RNVC: 2
1-3-105: RNCC: 5 | RNVC: 2
105X75: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-548-9217
Fluid Pressure Line Multiple Connector

995489217
B73821TEM2: RNCC: 3 | RNVC: 2
B7382-2: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-720-4388
Pipe To Tube Straight Adapter

997204388
1076/V88: RNCC: 3 | RNVC: 2
V88: RNCC: 5 | RNVC: 1
H926-400559: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-789-1724
Tube Coupling Inverted Nut

997891724
44/263/237: RNCC: 3 | RNVC: 2
H926-937564: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-641-4054
Tube Fitting Brazing Ferrule

996414054
AS43022-06: RNCC: 2 | RNVC: 2
EAG5591-2-06: RNCC: 3 | RNVC: 2
EAG5591-2-6: RNCC: 5 | RNVC: 2
PAN4010-06: RNCC: 5 | RNVC: 9
85-690-0959: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-729-3703
Tube-Hose Fitting Compression Sleeve

997293703
CC264582/2: RNCC: 1 | RNVC: 2
34-0278-07: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-441-8393
Pipe Coupling

994418393
2862: RNCC: 3 | RNVC: 2
Y100 640 12: RNCC: 5 | RNVC: 2

2 Oct 1989

4730-99-144-6575
Fluid Pressure Line Multiple Connector

991446575
100093800: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-831-4729
Pipe To Tube Straight Adapter

998314729
PGT705526: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-441-7797
Pipe To Tube Straight Adapter

994417797
S2893B: RNCC: 3 | RNVC: 2
W1S7874B34: RNCC: 5 | RNVC: 2
16B9276: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-411-8633
Fluid Pressure Line Multiple Connector

994118633
4501Y165: RNCC: 3 | RNVC: 2
27Q14186: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-719-3922
Hose Clamp

997193922
3AA35688-1: RNCC: 3 | RNVC: 2

14 Nov 1981

4730-99-239-2142
Hose Clamp

4730-99-448-8566
Banjo Bolt

4730-99-730-1559
Tube Reducer

4730-99-746-3689
Pipe Straight Adapter

4730-99-755-8818
Pipe Straight Adapter

4730-99-758-6869

4730-99-796-3473
Pipe Reducer

4730-99-791-2554
Branch Piece

4730-99-789-1119

4730-99-786-6880

4730-99-789-1107
Flange To Tub Elbow

4730-99-789-4437

4730-99-784-2792
Weed Box

4730-99-789-0598
Pipe Straight Adapter

4730-99-787-8550

4730-99-791-3647

4730-99-613-3285
Pipe Nipple

996133285
ER5241: RNCC: 3 | RNVC: 2

15 Oct 2007

4730-99-798-2031
Pipe To Tube Elbow

997982031
65MHD: RNCC: 3 | RNVC: 1
65MHD 3/8IN BSP BY 12MM: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-795-3231
Sediment Strainer Body

997953231
LV1401-1 1/4: RNCC: 3 | RNVC: 2

30 May 2006

4730-99-660-2998
Union Nut

996602998
TC163/1: RNCC: 3 | RNVC: 2
1049/5161.5: RNCC: 5 | RNVC: 2

20 May 1992

4730-99-442-6311
N Connecting Sleeve

4730-99-533-4779
Hose Coupling

995334779
3002261: RNCC: 3 | RNVC: 2
570920-8-6: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-548-6463
Spray Nozzle

995486463
1/4BXM062: RNCC: 3 | RNVC: 1

25 Apr 1991

4730-99-828-7258
Pipe Coupling

998287258
3/811: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-850-0570
Union Nut

998500570
270115: RNCC: 3 | RNVC: 2
LV7RU270115: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-738-5551
Pipe To Tube Straight Adapter

997385551
8363160: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-828-4602

4730-99-446-1695

4730-99-332-3895

4730-99-282-1247
Adaptor

4730-99-830-2510

4730-99-205-3428

4730-99-830-7963
Man1fold Block

4730-99-829-7386

4730-99-205-5491

4730-99-827-9452

4730-99-255-6246
Union Thread Piece

4730-99-277-5947
Hose Socket

4730-99-994-9303

4730-99-842-3582

4730-99-769-1717

4730-99-767-5324
Tube Reducer

4730-99-849-8817
Pipe Straight Adapter

4730-99-842-9305

4730-99-915-6229
Pipe Straight Adapter

4730-99-861-4114

4730-99-758-2159
Compression Sleeve

4730-99-123-7230

4730-99-558-0328
Pipe Cross

995580328
SSBN01MC889-1: RNCC: 3 | RNVC: 2
004462235: RNCC: 5 | RNVC: 2
SX/W/70/1: RNCC: 5 | RNVC: 2
004462235/01: RNCC: 5 | RNVC: 2
MC889-1: RNCC: 5 | RNVC: 2
SF/423/AB/023: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-558-1869
Banjo Coupling Asse

995581869
A24-24BJR: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-391-1733
Connector Assembly

993911733
EA6505G525-043: RNCC: 3 | RNVC: 2

6 Dec 2003

4730-99-556-8139
Packing Nut

995568139
6670005: RNCC: 3 | RNVC: 2
AMM2053: RNCC: 5 | RNVC: 2
353-213510: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-748-4807
Tube Reducer

997484807
SF/123/CN/004/004: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-736-8359
Pipe To Tube Straight Adapter

997368359
SSN.04/200.11/601/294: RNCC: 3 | RNVC: 2
200.11/601/294: RNCC: 5 | RNVC: 2
H926-398406: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-756-4897
Pipe To Tube Straight Adapter

997564897
D63837: RNCC: 3 | RNVC: 2
D63837/43: RNCC: 5 | RNVC: 1
D63837/D63843: RNCC: 5 | RNVC: 1
H363-258530: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-530-6435
Pi Straight Adaptor

995306435
810-365-0127: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-436-4940
Tube Elbow

994364940
70-80-558: RNCC: 3 | RNVC: 2

24 Jul 2008

4730-99-420-3117
Connection

994203117
DNC 15-677: RNCC: 4 | RNVC: 1
MCM/171/02/001: RNCC: 5 | RNVC: 1
002566955: RNCC: 5 | RNVC: 1
MCM/171/02/001 ITEM 34: RNCC: 5 | RNVC: 2
002566955 ITEM 34: RNCC: 5 | RNVC: 2
MCM/171/02/001/34: RNCC: 5 | RNVC: 2
G0430: RNCC: 5 | RNVC: 2
0254-13551: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-812-1439
Screwed Plug

998121439
NO PRIMARY REF 99-812-1439: RNCC: 3 | RNVC: 2
LV3RRD13045: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-323-6707
Pipe Nipple

993236707
VGS-6693J: RNCC: 3 | RNVC: 2
26VC21952: RNCC: 6 | RNVC: 9

10 Jun 2002

4730-99-203-7500
Hose Clamp

992037500
NO PRIMARY REF 99-203-7500: RNCC: 3 | RNVC: 2
137737: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-742-3718
Flow Turbine

997423718
998/11047: RNCC: 3 | RNVC: 2

15 Sep 2011

4730-99-665-3853
Clamp

996653853
SCLD-48: RNCC: 3 | RNVC: 2

31 Aug 2001

4730-99-760-7548
Pipe Flange

997607548
MF/01205/SL/001: RNCC: 3 | RNVC: 2
004464326: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-772-3049
Pipe To Hose Elbow

997723049
SSN02/300/804/52: RNCC: 3 | RNVC: 2
300/804/52: RNCC: 5 | RNVC: 1
H926-095622: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-778-8156
Pipe To Tube Straight Adapter

997788156
25375 238: RNCC: 3 | RNVC: 2
H577-207812: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-269-3239
Tube-Hose Fitting Compression Sleeve

992693239
NO PRIMARY REF 99-269-3239: RNCC: 3 | RNVC: 2
UPNS-12: RNCC: 5 | RNVC: 2

21 Jun 2010

4730-99-224-9838
Transfer Tube

992249838
NO PRIMARY REF 99-224-9838: RNCC: 3 | RNVC: 2
M6055-12: RNCC: 5 | RNVC: 9
71A954: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-803-0289
Union Nut

998030289
NO PRIMARY REF 99-803-0289: RNCC: 3 | RNVC: 2
91602918: RNCC: 5 | RNVC: 2
6N-316/MM: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-464-9536
Connector

994649536
M2825011500000: RNCC: 3 | RNVC: 2

20 Nov 2010

4730-99-253-1397
Sediment Strainer

992531397
001010113: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-300-4464

4730-99-402-8503

4730-99-402-6339

4730-99-301-1865
Fuel Spray Shield

4730-99-776-8086
Hose Assembly

997768086
230603&260116&260204&293803: RNCC: 3 | RNVC: 1
DEFSTAN22-1: RNCC: 4 | RNVC: 1
NES 2001: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-777-7659
Sediment Strainer

997777659
5/8: RNCC: 3 | RNVC: 1
5/8: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-766-1814

4730-99-769-6281
Fluid Cool Manifold

4730-99-439-7154
Tube Fitting Brazing Ferrule

994397154
130-1: RNCC: 3 | RNVC: 2
61AE40689: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-288-7810
Connector Rib 1 Ttv

992887810
M2815024220000: RNCC: 3 | RNVC: 2

11 Apr 2013

4730-99-775-8181

4730-99-700-1245
Machine Thread Plug

997001245
UB95178: RNCC: 3 | RNVC: 2
B95178: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-836-7092
Pipe To Hose Straight Adapter

998367092
9014950: RNCC: 3 | RNVC: 2
9014950: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-201-2896
Stud Coupling Assem

992012896
E138-3: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-836-8976
Pipe Tee

998368976
814387.0: RNCC: 3 | RNVC: 2

11 Aug 2010

4730-99-520-5263
Pipe To Tube Straight Adapter

995205263
1009-15-8: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-762-9727
Connector

997629727
3.409.725: RNCC: 3 | RNVC: 2
3.409.725: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-550-8649

4730-99-547-7319
Pipe Reducer

4730-99-253-8374
Fluid Pressure Line Multiple Connector

992538374
NKH298: RNCC: 3 | RNVC: 2
8FSC: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-459-0097
Elbow

994590097
92354513: RNCC: 3 | RNVC: 2

25 Sep 2001

4730-99-666-8265
Quick Disconnect Coupling Half

996668265
MBEU176946: RNCC: 3 | RNVC: 2

3 Mar 2007

4730-99-205-7894
Fluid Passage Bolt

992057894
32184331: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-549-7861
Swivel Cap

995497861
6FNMK4S: RNCC: 3 | RNVC: 2

31 Jul 2004

4730-99-336-1531
Eductor Nozzle

993361531
98053N: RNCC: 3 | RNVC: 2

15 Aug 2000

4730-99-468-0885
Pipe Straight Adapter

4730-99-799-4704
Pipe Flange

4730-99-799-1374

4730-99-808-9195

4730-99-468-2313
Union Nut

4730-99-439-5092

4730-99-994-0110
Adapter

4730-99-842-3719

4730-99-762-9669
Special Nipple

4730-99-762-6295

4730-99-977-5993

4730-99-762-5512
Flange Connector

4730-99-768-5241

4730-99-977-6068

4730-99-759-7298
Banjo Bolt And Filt

4730-99-759-3259

4730-99-923-5193
Metallic Bent Pipe

4730-99-763-2078

4730-99-759-6555

4730-99-729-6324

4730-99-947-5773
Fluid Passage Bolt

999475773
80-05-46-0395: RNCC: 3 | RNVC: 2

18 Dec 1978

4730-99-942-6198
Union Nut

999426198
SSML7-30PT1: RNCC: 4 | RNVC: 1
FT010GDSN1MODLA: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-232-3191
Pipe Expansion Joint

992323191
D 9066: RNCC: 3 | RNVC: 2
15065721: RNCC: 5 | RNVC: 2
2-0000-3-0/9066: RNCC: 5 | RNVC: 2

24 Mar 2006

4730-99-777-8429
Pipe To Tube Straight Adapter

997778429
1066 ETS 210: RNCC: 3 | RNVC: 2
1066/ETS/210: RNCC: 5 | RNVC: 2
H926-279362: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-731-8262
Pipe Reducer

997318262
1076/SD435: RNCC: 3 | RNVC: 2
H926-410491: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-775-5374
Pipe To Tube Straight Adapter

997755374
1074 MHC 451: RNCC: 3 | RNVC: 2
1074/MHC 451: RNCC: 5 | RNVC: 2
H926-287951: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-548-6257
Union Nut

995486257
7007181TEM2: RNCC: 3 | RNVC: 2
700718-10031TEM2: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-947-1396
Pipe To Hose Straight Adapter

999471396
CM4548D: RNCC: 3 | RNVC: 2
Y2632929-4: RNCC: 5 | RNVC: 2
Y2632929-4: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-666-4152
Hydraulic System Accessories Manifold

996664152
CBD16058P09: RNCC: 3 | RNVC: 2

24 May 2005

4730-99-521-2401
Multiple Connector

4730-99-531-3315

4730-99-209-8096
Pipe Tee

992098096
2220-400: RNCC: 3 | RNVC: 2
4K5221: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-531-4944

4730-99-521-4718

4730-99-469-5625

4730-99-562-0627
Pipe Plug

995620627
A00714012: RNCC: 3 | RNVC: 2
A00714012A: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-817-5949
Quick Disconnect Coupling Half

998175949
AVA2059C: RNCC: 3 | RNVC: 2
FV584161: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-201-1086
Fluid Passage Bolt

992011086
EVA1362: RNCC: 3 | RNVC: 2
560702: RNCC: 5 | RNVC: 2
W17WSRJV3628-3: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-784-9860
Elbow

4730-99-789-0612
Pipe Straight Adapter

4730-99-144-6963

4730-99-544-1616
Adaptor

4730-99-789-0633
Pipe Tee Adaptor

4730-99-790-3280
Pipe Elbow

4730-99-560-8061

4730-99-617-7402
Pipe To Tube Straight Adapter

996177402
A1R119144: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-219-1509
Hydraulic System Accessories Manifold

992191509
185301: RNCC: 3 | RNVC: 2

18 Mar 1999

4730-99-627-1431
Friction Plug

996271431
004621: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-611-5705
Pipe To Tube Straight Adapter

996115705
AC041014: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-257-9054
Fitting Lub Adapter

992579054
PT1012: RNCC: 3 | RNVC: 2

2 May 1995

4730-99-123-7223
Fluid Passage Bolt

991237223
6-4BUN43: RNCC: 3 | RNVC: 2
26DL10197: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-789-9281
Socket Valve

997899281
HTE 752-E-1: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-115-8898
Pipe To Tube Straight Adapter

991158898
S3072S: RNCC: 3 | RNVC: 2
PC642156-6: RNCC: 5 | RNVC: 2
52447361TEM19: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-793-9342
Minilock Nipple End

997939342
HTE762-B-5: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-983-9199
Hose Coupling

4730-99-839-8190
Pipe To Hose Elbow

998398190
3005178: RNCC: 3 | RNVC: 2
B32061-6: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-880-6940
Connector Assembly

998806940
6-4P4679A: RNCC: 3 | RNVC: 2
26DL13000: RNCC: 6 | RNVC: 9

29 Nov 2001

4730-99-277-5267
Pipe To Tube Elbow

992775267
94 433 004: RNCC: 3 | RNVC: 2
5/1869: RNCC: 5 | RNVC: 1
5/1869 REFERENCE 82: RNCC: 5 | RNVC: 2
RAK 1658: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-834-4168
Pipe Expansion Joint

998344168
MCD 8487-8: RNCC: 3 | RNVC: 2
2-0000-3-0/8487: RNCC: 5 | RNVC: 1
MCD8487-8: RNCC: 5 | RNVC: 2
14929916: RNCC: 5 | RNVC: 2

27 Mar 2006

4730-99-464-1878
Non-Metallic Connecting Sleeve

994641878
BA6673-126: RNCC: 3 | RNVC: 2
001298673/126: RNCC: 5 | RNVC: 2
SST.Y.520.00.0035.000/126: RNCC: 5 | RNVC: 2
BA6673 ITEM 126: RNCC: 5 | RNVC: 2

24 Jan 1995

4730-99-559-0872
Tube Fitting Brazing Ferrule

995590872
12662-2: RNCC: 3 | RNVC: 2
12662-2A: RNCC: 5 | RNVC: 2
H911-425867: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-299-8115
Pipe To Tube Tee

992998115
95 458 509: RNCC: 3 | RNVC: 2
5/1869: RNCC: 5 | RNVC: 1
ACU 8299: RNCC: 5 | RNVC: 2
5/1869 REFERENCE 166: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-778-3477
Pipe To Boss Straight Adapter

997783477
430/19810.2: RNCC: 3 | RNVC: 2
430/19810.2: RNCC: 5 | RNVC: 2
UWS2A2: RNCC: 6 | RNVC: 9

10 Mar 2003

4730-99-765-8687
Stud Elbow

997658687
L165/B/5: RNCC: 3 | RNVC: 2
L165B5: RNCC: 5 | RNVC: 2
817662: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-761-4202
Pipe To Tube Straight Adapter

997614202
1032-4: RNCC: 3 | RNVC: 2
1032-4: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-761-4200
Pipe To Tube Straight Adapter

997614200
1032-3: RNCC: 3 | RNVC: 2
1032-3: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-831-4829
Pipe To Tube Straight Adapter

998314829
S32155-201: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-948-6745
Tube Seal Bonnet

999486745
80-05-46-3995: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-227-5904
Quick Disconnect Coupling Half

992275904
HTE 711-166-B: RNCC: 3 | RNVC: 2
HTE711-166-B: RNCC: 6 | RNVC: 9

10 Sep 1991

4730-99-993-8618
Pipe To Boss Straight Adapter

999938618
MF/01001/CN/218: RNCC: 3 | RNVC: 2
004467968: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-419-4789
Cork Plug

994194789
NO PRIMARY REF 99-419-4789: RNCC: 3 | RNVC: 2
132-10-29: RNCC: 5 | RNVC: 2
0633-806318: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-153-6467
Pipe Clamp

991536467
DSP215/15PPGDAS: RNCC: 3 | RNVC: 2

31 May 2013

4730-99-666-8540
Pipe To Tube Straight Adapter

996668540
FA-5: RNCC: 3 | RNVC: 2

19 Apr 2007

4730-99-209-7809
Quick Coupling Half

992097809
NO PRIMARY REF 99-209-7809: RNCC: 3 | RNVC: 2
HTE8131K: RNCC: 5 | RNVC: 2
B111-7048: RNCC: 5 | RNVC: 2
4F8874: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-546-3751
Pipe To Tube Straight Adapter

995463751
MF91305: RNCC: 3 | RNVC: 2
MF91305-01: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-659-7964
Pipe To Hose Elbow

996597964
29E0713-18-6: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-934-6305
Pipe To Hose Straight Adapter

999346305
KU130K0603-000: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-835-4656
Pipe Plug

998354656
6BT06: RNCC: 3 | RNVC: 2
32-023: RNCC: 5 | RNVC: 2
064JR-005: RNCC: 6 | RNVC: 9
064KQ-006: RNCC: 6 | RNVC: 9

2 Oct 2006

4730-99-971-1935
Special Plug

999711935
33738-401: RNCC: 3 | RNVC: 2
H474-052855: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-724-4634
Pipe To Tube Straight Adapter

997244634
1076/AV313/A147-001: RNCC: 3 | RNVC: 2
AV313/A147-001: RNCC: 5 | RNVC: 1
A147-001 1076 AV 313: RNCC: 5 | RNVC: 2
H926-382837: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-838-1876
Female To Adaptor

998381876
TX1959: RNCC: 3 | RNVC: 2
043WY-004: RNCC: 6 | RNVC: 9

16 Nov 2004

4730-99-764-8897
Blind Pipe Flange

997648897
111279SHT349: RNCC: 3 | RNVC: 2
111279-SHT349: RNCC: 5 | RNVC: 9
111279SHT349: RNCC: 5 | RNVC: 9

25 Apr 1991

4730-99-339-5134
Plug

993395134
KA5925: RNCC: 3 | RNVC: 2

7 Dec 2010

4730-99-366-8908
Tube Coupling Swage Ferrule

993668908
C200095: RNCC: 3 | RNVC: 2

10 Jun 2010

4730-99-467-4302
Fluid Flow Restrictor

994674302
102598009: RNCC: 3 | RNVC: 2
27Q71267: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-983-9224
Pipe Assembly

4730-99-985-1955
Compression Sleeve

4730-99-712-1867
Fluid Passage Bolt

997121867
UC3013318: RNCC: 3 | RNVC: 2
27Q27060: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-611-8985
Flange To Tube Elbow

996118985
MBEU61142: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-010-0173
Pipe Tee

990100173
12: RNCC: 3 | RNVC: 1

25 Apr 1991

4730-99-203-3480
Pipe To Tube Straight Adapter

992033480
GMA52426: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-740-0208
Tube Cap

997400208
P03163300: RNCC: 3 | RNVC: 2
CM31633: RNCC: 5 | RNVC: 2

20 Jul 2005

4730-99-752-2103
Connector

997522103
J991517: RNCC: 3 | RNVC: 2
CV146779: RNCC: 5 | RNVC: 2

16 Mar 2009

4730-99-816-8583
Pipe To Tube Straight Adapter

998168583
64L2: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-554-2666
Pipe Cross

995542666
SSBN01MC864-1: RNCC: 3 | RNVC: 2
001112882: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-356-4624
Connector Tee

993564624
34033904: RNCC: 3 | RNVC: 2
Y.964-2: RNCC: 5 | RNVC: 2
34009702: RNCC: 5 | RNVC: 9

27 Nov 1996

4730-99-721-1115
Pipe To Tube Straight Adapter

997211115
1K3026: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-536-7135
Pipe To Tube Straight Adapter

995367135
4022-7: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-748-8590
Circumferential O R

4730-99-110-0567
S Coupling Assembly

4730-99-548-5940
Fluid Pressure Line Multiple Connector

995485940
100170616: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-366-6062
Tube Reducer

993666062
79902133: RNCC: 3 | RNVC: 2
FT550389: RNCC: 5 | RNVC: 2
2500602125: RNCC: 5 | RNVC: 2

19 Sep 2011

4730-99-872-1715

4730-99-848-9895

4730-99-229-7945
Tube Elbow

992297945
PI221208S: RNCC: 3 | RNVC: 2

10 Aug 2012

4730-99-168-7664
Pipe Coupling

991687664
2414: RNCC: 3 | RNVC: 2

20 Aug 1992

4730-99-835-6121
Pipe To Tube Straight Adapter

998356121
FV858145: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-728-5116
Bulkhead Tee

997285116
AS43141-05: RNCC: 2 | RNVC: 2

29 Jan 1990

4730-99-835-0509
Pipe To Tube Straight Adapter

998350509
04575706: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-746-3849

4730-99-745-7417
Handwheel

4730-99-746-2729
Metallic Bent Pipe

4730-99-741-7404
Pipe Elbow

4730-99-748-3861

4730-99-749-9812

4730-99-748-5005

4730-99-770-1454
Fitting

997701454
S-EMAS 10LR-SV: RNCC: 3 | RNVC: 2
60530.010: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-738-3728
Thermocouple Pocket

997383728
SSBN.01/510.03/501/9/2: RNCC: 3 | RNVC: 2
510.03/501/9/2: RNCC: 5 | RNVC: 1
H926-703395: RNCC: 6 | RNVC: 9
H926-703393: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-533-7520
Pipe Flange

995337520
001248860: RNCC: 3 | RNVC: 2
BR3013-2-PT1AND2: RNCC: 4 | RNVC: 1
GD1212: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-734-7208
Pipe To Tube Straight Adapter

997347208
1066/T.S. 556: RNCC: 3 | RNVC: 2
T.S. 556: RNCC: 5 | RNVC: 1
1072/T.S. 556: RNCC: 5 | RNVC: 2
H926-360902: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-591-2105
Anti-Flash Bonnet A

995912105
004502043: RNCC: 3 | RNVC: 1
004501747: RNCC: 5 | RNVC: 1
MCM/354/02/001: RNCC: 5 | RNVC: 1
MCM/381/01/037: RNCC: 5 | RNVC: 1
004501747 ITEM 14: RNCC: 5 | RNVC: 2
MCM/354/02/001 ITEM 14: RNCC: 5 | RNVC: 2
MCM/354/02/001/14: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-733-0830
Pipe Plug

997330830
0-1101-100/57: RNCC: 3 | RNVC: 2
Y033 249 10: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-775-8934
Tube Coupling Inverted Nut

997758934
SSBN.01/MC/822/1: RNCC: 3 | RNVC: 2
001112853: RNCC: 5 | RNVC: 1
MC/822/1: RNCC: 5 | RNVC: 2
H926-265871: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-251-1032
Silencer

992511032
NO PRIMARY REF 99-251-1032: RNCC: 3 | RNVC: 2
A8-20F-139 IT76: RNCC: 5 | RNVC: 2
20-2/1-029: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-524-4269
Pipe Reducer

995244269
34747-104-2: RNCC: 3 | RNVC: 2
M3126508: RNCC: 5 | RNVC: 2
H474-750715: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-546-0608
Union Nut

995460608
34715-158: RNCC: 3 | RNVC: 2
34715-158-2: RNCC: 5 | RNVC: 2
H474-967723: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-881-4775
Fluid Pressure Line Multiple Connector

998814775
NA1-3: RNCC: 3 | RNVC: 2
445-104: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-651-9956
Pipe To Hose Elbow

996519956
29E0591-14-4: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-202-1553
Fluid Pressure Line Multiple Connector

992021553
NO PRIMARY REF 99-202-1553: RNCC: 3 | RNVC: 2
1GDVA16139: RNCC: 5 | RNVC: 2
00001-03532: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-967-8753
Tube Elbow

999678753
AS43042-22: RNCC: 2 | RNVC: 2
PAN4033-22: RNCC: 5 | RNVC: 9

22 Jan 2001

4730-99-709-4297
Adaptor

997094297
MCM/327/01/063: RNCC: 3 | RNVC: 2
004502175: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-216-3099
Tube Coupling

992163099
NO PRIMARY REF 99-216-3099: RNCC: 3 | RNVC: 2
CSHR1/4WD: RNCC: 5 | RNVC: 2
DIN2353: RNCC: 6 | RNVC: 9

3 Jul 2013

4730-99-257-5880
Fluid Passage Bolt

992575880
338705X1: RNCC: 3 | RNVC: 2
54166: RNCC: 5 | RNVC: 1

25 Apr 1991

4730-99-930-4912
Pipe To Tube Straight Adapter

999304912
MF/01661/CN/017: RNCC: 3 | RNVC: 2
004469623: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-784-9626
Pipe To Tube Straight Adapter

997849626
SSN.01/518/830/135: RNCC: 3 | RNVC: 2
518/830/135: RNCC: 5 | RNVC: 1
H926-201616: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-655-5778
Socket Body Miniloc

996555778
HTE750-39A8: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-833-7601
Reducer

998337601
QCA/020059200: RNCC: 3 | RNVC: 2
020059200: RNCC: 5 | RNVC: 1

14 Oct 2003

4730-99-716-9347
Pipe Plug

997169347
PE.51121: RNCC: 3 | RNVC: 2

25 Apr 1991

4730-99-225-4840
Inlet Assembl Elbow

992254840
V107897: RNCC: 3 | RNVC: 2

25 Jun 1991

4730-99-528-4024
Double-Ended Union

995284024
C76772-1: RNCC: 3 | RNVC: 2
737-863205: RNCC: 6 | RNVC: 9

25 Apr 1991

4730-99-781-8790
Plug

997818790
346 5977: RNCC: 3 | RNVC: 2
5721040904: RNCC: 5 | RNVC: 2
346 5977: RNCC: 5 | RNVC: 2
RK 60005 S FIGURE 3: RNCC: 5 | RNVC: 2

25 Apr 1991

4730-99-756-9871
Pipe Cross

997569871
K8-L: RNCC: 3 | RNVC: 2

25 Apr 1991

Load More Results