Hose, Pipe, Tube, Lubrication, and Railing Fittings - Norway (NO)
Federal Supply Class (FSC): 4730
NATO Supply Classification Class (NSC): 4730
Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings
NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings
Items Managed by Norway (NO) - NCB is 25
Page 4 of 14
NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by Norway
| 47 | 30 | 25 | XXX | XXXX | |||
|---|---|---|---|---|---|---|---|
| Group FSG | Class | NCB | Identifier | ||||
| FSC Federal Supply Class | NIIN | ||||||
| NSN | |||||||
NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.
Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.
Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.
The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.
When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.
Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.
Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.
Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).
Frequently Asked Questions(FAQ) for Federal Supply Class 4730
- What is Federal Supply Class 4730?
- FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
- What is NATO Supply Classification Class 4730?
- NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
- Which Federal Supply Group is FSC 4730 in?
- FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
- Which NATO Supply Classification Group is NSC 4730 in?
- NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Supply Items Included in Federal Supply Class 4730
- What is a Lubrication Fitting? 67 Items
- A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
- What is a Hose Elbow? 12 Items
- A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
- What is a Hose Coupling? 58 Items
- A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
- What is a Pipe Elbow? 12 Items
- A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
- What is a Pipe To Tube Elbow? 24 Items
- A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
- What is a Tube Elbow? 181 Items
- A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
- What is a Tube To Hose Elbow? 15 Items
- A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
- What is a Pipe To Hose Straight Adapter? 10 Items
- A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
- What is a Pipe To Tube Straight Adapter? 40 Items
- A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
- What is a Tube To Hose Straight Adapter? 15 Items
- A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
- What is a Pipe Bushing? 10 Items
- A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
- What is a Hose Nipple? 19 Items
- A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
- What is a Pipe Nipple? 29 Items
- A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
- What is a Tube Nipple? 260 Items
- A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
- What is a Pipe Union? 16 Items
- A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
- What is a Pipe To Tube Union? 19 Items
- A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
- What is a Tube Union? 79 Items
- A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
- What is a Blind Pipe Flange? 22 Items
- A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
- What is a Pipe Flange? 129 Items
- A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
- What is a Machine Thread Plug? 15 Items
- A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
- What is a Tube Lateral? 11 Items
- A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
- What is a Hose Tee? 11 Items
- A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
- What is a Pipe Tee? 15 Items
- A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
- What is a Pipe To Tube Tee? 29 Items
- A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
- What is a Tube Tee? 155 Items
- A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
- What is a Hose Coupling Nut? 11 Items
- A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
- What is a Tube Coupling Nut? 62 Items
- A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
- What is an Union Thread Piece? 10 Items
- An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
- Expansion Joint,Pipe 19 Items
- Clamp,Pipe,Anchor And Reinforcement 34 Items
- What is a Tube Cap? 27 Items
- A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
- What is a Pipe Coupling? 15 Items
- A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
- What is a Pipe Plug? 113 Items
- A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
- What is a Tube Coupling? 78 Items
- A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
- What is a Hose Reducer? 13 Items
- A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
- What is a Tube Reducer? 87 Items
- A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
- What is a Tube Cross? 21 Items
- A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
- What is a Hose Clamp? 126 Items
- A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
- What is a Pipeline Flexible Spacer? 39 Items
- A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
- What is an Adapter Bushing? 10 Items
- An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
- What is a Tube Fitting Brazing Ferrule? 20 Items
- A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
- What is a Tube Fitting Clinch Sleeve? 47 Items
- A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
- What is a Tube-Hose Fitting Compression Sleeve? 44 Items
- A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
- What is a Tube Fitting Flared Sleeve? 39 Items
- A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
- What is a Fluid Flow Restrictor? 22 Items
- A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
- What is a Moisture Trap? 10 Items
- A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
- What is a Sediment Strainer Element? 28 Items
- A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
- What is a Quick Disconnect Coupling Half? 126 Items
- A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
- What is a Fluid Pressure Line Multiple Connector? 36 Items
- A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
- What is a Fluid Passage Bolt? 63 Items
- A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
- What is a Quick Disconnect Coupling Assembly? 36 Items
- A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
- What is an Air Hose Connector? 14 Items
- An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
- What is a Hose To Boss Straight Adapter? 28 Items
- A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
- What is a Pipe To Boss Straight Adapter? 10 Items
- A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
- What is a Tube To Boss Straight Adapter? 180 Items
- A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
- What is a Tube To Boss Elbow? 30 Items
- A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
- What is a Tube To Boss Tee? 26 Items
- A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
- What is a Suction Strainer? 13 Items
- A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
- Connector,Tubing,Straight 11 Items
- Nipple,Special 17 Items
- What is a Hydraulic Swivel Joint? 30 Items
- A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
Stock Items From Supply Class 4730 Page 4 of 14
- 251612167
- 623.7992
- RNCC: 3 | RNVC: 2
- 99481936
- RNCC: 5 | RNVC: 2
- 251604155
- 11665
- RNCC: 3 | RNVC: 2
- AK-1K ITEM 1
- RNCC: 5 | RNVC: 2
- A-4653 ITEM 1
- RNCC: D | RNVC: 9
- 251505204
- 3351
- RNCC: 3 | RNVC: 2
- 1006143C ITEM 5
- RNCC: 5 | RNVC: 1
- 3351
- RNCC: 5 | RNVC: 2
- 251208343
- 380X4
- RNCC: 3 | RNVC: 2
- 251505205
- 3352
- RNCC: 3 | RNVC: 2
- 1006143C ITEM 19
- RNCC: 5 | RNVC: 1
- 251502659
- 13924
- RNCC: 3 | RNVC: 2
- 251208345
- 48FX5X4
- RNCC: 3 | RNVC: 2
- 251503245
- 885
- RNCC: 3 | RNVC: 2
- A-21192
- RNCC: 6 | RNVC: 9
- 251383994
- 4292
- RNCC: 3 | RNVC: 2
- 251438861
- 8652651
- RNCC: 5 | RNVC: 2
- 251405827
- KNMSS-0095 M/NOR NR 1
- RNCC: 5 | RNVC: 2
- KNMSS0095MNORNR1
- RNCC: 5 | RNVC: 2
- 251506572
- 60183787-00
- RNCC: 3 | RNVC: 2
- 251500415
- 2.2611.002.8
- RNCC: 3 | RNVC: 2
- 251515199
- 3100667
- RNCC: 3 | RNVC: 2
- 251295259
- 406-38X1 1/2IN
- RNCC: 6 | RNVC: 9
- 251500416
- 2.2611.006.6
- RNCC: 3 | RNVC: 2
- 251438860
- 8652643
- RNCC: 5 | RNVC: 2
- 251293640
- XG 20-S/STOSS/SA/B2A
- RNCC: 3 | RNVC: 2
- XG20SSTOSSSAB2A
- RNCC: 3 | RNVC: 2
- 251180916
- AB4-5157
- RNCC: 3 | RNVC: 2
- 4-6021
- RNCC: 3 | RNVC: 2
- 251500414
- 2.2611.004.2
- RNCC: 3 | RNVC: 2
- 251438862
- 8669317
- RNCC: 5 | RNVC: 2
- 251500417
- 2.2611.003.5
- RNCC: 3 | RNVC: 2
- 251501502
- 4590
- RNCC: 3 | RNVC: 2
- 251460500
- 4512413
- RNCC: 5 | RNVC: 2
- 251508411
- 138271
- RNCC: 3 | RNVC: 2
- 251140117
- M7474
- RNCC: 5 | RNVC: 2
- 251338636
- 113650
- RNCC: 3 | RNVC: 2
- 304023
- RNCC: 5 | RNVC: 2
- DELAVNM148
- RNCC: 6 | RNVC: 9
- 251204217
- 90266
- RNCC: 3 | RNVC: 2
- 251392293
- 7848
- RNCC: 3 | RNVC: 2
- 251408651
- 511504
- RNCC: 5 | RNVC: 2
- 5013913
- RNCC: 5 | RNVC: 2
- 251132003
- SS18259
- RNCC: 5 | RNVC: 2
- 251099894
- 136M42704
- RNCC: 3 | RNVC: 2
- 251338632
- 250126
- RNCC: 3 | RNVC: 2
- 104776
- RNCC: 5 | RNVC: 2
- DELAVNM148
- RNCC: 6 | RNVC: 9
- 251520658
- 12V4OMXS
- RNCC: 3 | RNVC: 2
- 2521 2129-120
- RNCC: 5 | RNVC: 2
- 251340586
- 4161906SS-316
- RNCC: 3 | RNVC: 2
- 41619-06
- RNCC: 5 | RNVC: 2
- 251344623
- RAJA B50
- RNCC: 3 | RNVC: 2
- 251508679
- A36150
- RNCC: 3 | RNVC: 2
- 251607030
- 5804432
- RNCC: 3 | RNVC: 2
- 251411971
- 160626
- RNCC: 5 | RNVC: 2
- 251428457
- 2381957
- RNCC: 5 | RNVC: 2
- 260693
- RNCC: 5 | RNVC: 2
- 251363295
- 510775
- RNCC: 5 | RNVC: 2
- 251408377
- 2383054
- RNCC: 5 | RNVC: 2
- 260842
- RNCC: 5 | RNVC: 2
- 251392273
- 7377
- RNCC: 3 | RNVC: 2
- 251428590
- DIN2633-ND32/42,4
- RNCC: 2 | RNVC: 2
- 1252659
- RNCC: 5 | RNVC: 2
- 170711
- RNCC: 5 | RNVC: 2
- 251495816
- 2-20632-01
- RNCC: 3 | RNVC: 2
- 251295257
- 403-38X1 1/2IN
- RNCC: 6 | RNVC: 9
- 251292196
- M10X1DIN908-1-4571
- RNCC: 2 | RNVC: 2
- 251439048
- 8661553
- RNCC: 5 | RNVC: 2
- 251429758
- 192875
- RNCC: 3 | RNVC: 2
- 251098093
- 7375
- RNCC: 2 | RNVC: 2
- M7375
- RNCC: 3 | RNVC: 2
- 7-29-7-00-04-155-01
- RNCC: 5 | RNVC: 2
- 251209060
- W191-01REP52
- RNCC: 3 | RNVC: 2
- 251514587
- NO PRIMARY REF25-151-4587
- RNCC: 3 | RNVC: 2
- 7365
- RNCC: 5 | RNVC: 2
- 251402550
- 621202110
- RNCC: 3 | RNVC: 2
- 251507624
- 623.7017
- RNCC: 3 | RNVC: 2
- 251601886
- 623.7608
- RNCC: 3 | RNVC: 2
- 251405123
- 194B08M04
- RNCC: 3 | RNVC: 2
- 251404690
- 11008575
- RNCC: 3 | RNVC: 2
- 251295219
- R1/2IN KNMS S-0089 POS 40
- RNCC: 3 | RNVC: 2
- R1-2INDIN910-I-CUNI10FE
- RNCC: 3 | RNVC: 2
- 251160506
- 512
- RNCC: 3 | RNVC: 2
- 0125690
- RNCC: 5 | RNVC: 2
- 125690
- RNCC: 5 | RNVC: 2
- 403801110060
- RNCC: 5 | RNVC: 2
- 251405929
- 56043-001
- RNCC: 3 | RNVC: 2
- 56043001
- RNCC: 5 | RNVC: 2
- 251406591
- 543713
- RNCC: 5 | RNVC: 2
- 5062809
- RNCC: 5 | RNVC: 2
- 540713
- RNCC: 5 | RNVC: 2
- 251610824
- 3036
- RNCC: 3 | RNVC: 2
- 251902170
- M3690ASH7PC8
- RNCC: 5 | RNVC: 2
- 251428442
- 2381054
- RNCC: 5 | RNVC: 2
- 260512
- RNCC: 5 | RNVC: 2
- 251065640
- R4-113C
- RNCC: 6 | RNVC: 9
- 251363903
- 3155-52
- RNCC: 5 | RNVC: 2
- 251388547
- 563860-6
- RNCC: 5 | RNVC: 2
- 563860
- RNCC: 5 | RNVC: 2
- 251083359
- NO PRIMARY REF25-108-3359
- RNCC: 3 | RNVC: 2
- EVW20SMD0BBEL
- RNCC: 5 | RNVC: 2
- 251489563
- 30904-48
- RNCC: 3 | RNVC: 2
- 254951313
- 140103-3/8IN
- RNCC: 3 | RNVC: 2
- 1030135
- RNCC: 5 | RNVC: 2
- 251185006
- 4D3862
- RNCC: 5 | RNVC: 2
- 4D3862
- RNCC: 6 | RNVC: 9
- 251147264
- 7331
- RNCC: 3 | RNVC: 2
- 251146328
- 539-01-151
- RNCC: 3 | RNVC: 2
- 251356506
- SS300-65280-U
- RNCC: 3 | RNVC: 2
- 251154596
- 5012316
- RNCC: 5 | RNVC: 2
- 05120 1-4-1-2
- RNCC: 5 | RNVC: 2
- 510929
- RNCC: 5 | RNVC: 2
- 251502506
- HS 1431 S1.1 ITEM 9
- RNCC: 3 | RNVC: 2
- 21-10933 ITEM 9
- RNCC: 5 | RNVC: 2
- 21-10933 ITEM 9
- RNCC: 5 | RNVC: 2
- 251453330
- 3174541237009
- RNCC: 3 | RNVC: 2
- 3174541237006
- RNCC: 3 | RNVC: 2
- M12X1,5
- RNCC: 6 | RNVC: 9
- M12X1,5-1/4NPT
- RNCC: 6 | RNVC: 9
- 251438453
- 8662193
- RNCC: 5 | RNVC: 2
- SWN51-0407/06-20X1/2Z-CUNI10
- RNCC: 5 | RNVC: 2
- 251383588
- 321528-2
- RNCC: 3 | RNVC: 2
- 321528
- RNCC: 3 | RNVC: 2
- STD1578
- RNCC: 6 | RNVC: 9
- 251607651
- A5573
- RNCC: 3 | RNVC: 2
- 251429691
- DIN 7604 3/8AER
- RNCC: 3 | RNVC: 2
- 4863
- RNCC: 5 | RNVC: 2
- 251098095
- 7377PC1
- RNCC: 2 | RNVC: 2
- M7377PC1
- RNCC: 3 | RNVC: 2
- 7-29-7-00-04-71-01
- RNCC: 5 | RNVC: 2
- 251241449
- 039091
- RNCC: 5 | RNVC: 2
- 251406458
- 5060443
- RNCC: 5 | RNVC: 2
- 541089
- RNCC: 5 | RNVC: 2
- 251385330
- D9597-961
- RNCC: 3 | RNVC: 2
- C-52XD-25
- RNCC: 5 | RNVC: 2
- 251382138
- 1392
- RNCC: 3 | RNVC: 2
- 563365
- RNCC: 5 | RNVC: 2
- 563365-6
- RNCC: 5 | RNVC: 2
- 251030753
- 5A1-2IN
- RNCC: 3 | RNVC: 2
- 251145620
- 22XD18-3
- RNCC: 3 | RNVC: 2
- 251438458
- 8652503
- RNCC: 5 | RNVC: 2
- 251371611
- 314812
- RNCC: 3 | RNVC: 2
- 314812-9
- RNCC: 3 | RNVC: 2
- STD1578
- RNCC: 6 | RNVC: 9
- 251343191
- N21-9015-1/4-1/4-1/4
- RNCC: 2 | RNVC: 2
- 10315837
- RNCC: 5 | RNVC: 2
- DELAVRB70
- RNCC: 6 | RNVC: 9
- 251225102
- 49-77PC50
- RNCC: 3 | RNVC: 2
- 535CKR
- RNCC: 3 | RNVC: 2
- 251282299
- 640-14
- RNCC: 6 | RNVC: 9
- 251246281
- S50-48SKZ
- RNCC: 3 | RNVC: 2
- 40385016500
- RNCC: 5 | RNVC: 2
- 251612058
- 90106012
- RNCC: 3 | RNVC: 2
- 41285123
- RNCC: 5 | RNVC: 2
- 251428630
- AGUGG6350
- RNCC: 3 | RNVC: 2
- MUFFE,MOB.AGGR./50MM SLANGE
- RNCC: 6 | RNVC: 9
- 251451193
- 6226241
- RNCC: 3 | RNVC: 2
- 251093734
- 954342-7414-311
- RNCC: 2 | RNVC: 1
- 954342
- RNCC: 3 | RNVC: 2
- 251270820
- 039458
- RNCC: 3 | RNVC: 2
- 251399573
- 331011
- RNCC: 5 | RNVC: 2
- 331011-7
- RNCC: 5 | RNVC: 2
- 251509970
- 3008138
- RNCC: 3 | RNVC: 2
- 251385796
- EKQL06-02F
- RNCC: 3 | RNVC: 2
- 251526073
- JBP6
- RNCC: 3 | RNVC: 2
- 91934-40600
- RNCC: 5 | RNVC: 2
- 91934-40600
- RNCC: 5 | RNVC: 2
- 251604074
- 623.7862
- RNCC: 3 | RNVC: 2
- 91905-01016
- RNCC: 5 | RNVC: 2
- 7422015184
- RNCC: 5 | RNVC: 2
- 10316867
- RNCC: 6 | RNVC: 9
- 251321154
- 945
- RNCC: 3 | RNVC: 2
- 25003
- RNCC: 5 | RNVC: 2
- 254 2700
- RNCC: 5 | RNVC: 2
- 254-2700
- RNCC: 5 | RNVC: 2
- 251267552
- N15-152-1-4IN
- RNCC: 3 | RNVC: 1
- 10816037
- RNCC: 3 | RNVC: 2
- DELAVMIKN9F03
- RNCC: 6 | RNVC: 9
- 251208665
- 906-132REP5
- RNCC: 3 | RNVC: 2
- 251248696
- A13X8DIN7612-5S
- RNCC: 3 | RNVC: 2
- 251283594
- 175596
- RNCC: 3 | RNVC: 2
- 176-175596
- RNCC: 3 | RNVC: 2
- 251902305
- M3696ASH26PC26
- RNCC: 3 | RNVC: 2
- 3696ASH32
- RNCC: 5 | RNVC: 2
- 251505818
- 595767
- RNCC: 3 | RNVC: 2
- 251460875
- 55-0129-04
- RNCC: 3 | RNVC: 2
- 251380409
- 207606
- RNCC: 3 | RNVC: 2
- 207606-5
- RNCC: 3 | RNVC: 2
- 251486929
- 3110102
- RNCC: 3 | RNVC: 2
- AG-3110102
- RNCC: 5 | RNVC: 2
- 251609621
- 2529 2103-080
- RNCC: 3 | RNVC: 2
- 251349516
- SS300-422-65199U
- RNCC: 3 | RNVC: 2
- 251336252
- 2IN HAN(CAMLOCK/HURTIGKOBLING)-
- RNCC: 5 | RNVC: 2
- 4IN HAN (CAMLOCK/HURTIGKOBLING).
- RNCC: 5 | RNVC: 2
- 251065666
- R4-114N
- RNCC: 6 | RNVC: 9
- 251502132
- 11464
- RNCC: 3 | RNVC: 2
- 11464
- RNCC: 5 | RNVC: 2
- K-DSWV22LR
- RNCC: 5 | RNVC: 2
- W293/28-34
- RNCC: 5 | RNVC: 2
- 251343194
- N15-153-1/2-1/8
- RNCC: 2 | RNVC: 2
- 10816064
- RNCC: 5 | RNVC: 2
- DELAVRB700
- RNCC: 6 | RNVC: 9
- 251456115
- 83080-00009
- RNCC: 3 | RNVC: 2
- 251287400
- WG1373-0213-101
- RNCC: 3 | RNVC: 2
- 251428447
- 2381079
- RNCC: 5 | RNVC: 2
- 260517
- RNCC: 5 | RNVC: 2
- 251208353
- 311X8F M/HYLSE
- RNCC: 3 | RNVC: 2
- 311X8F
- RNCC: 5 | RNVC: 2
- 251156918
- 3083
- RNCC: 3 | RNVC: 2
- S118-25SK2TMMN295
- RNCC: 3 | RNVC: 2
- 251275739
- S330-25SKZ
- RNCC: 3 | RNVC: 2
- 403850163300
- RNCC: 5 | RNVC: 2
- 89227
- RNCC: 5 | RNVC: 2
- 251406432
- 5060109
- RNCC: 5 | RNVC: 2
- 541013
- RNCC: 5 | RNVC: 2
- 251352855
- 17670-ZA8-000
- RNCC: 3 | RNVC: 2
- 251433963
- 0020-1003
- RNCC: 3 | RNVC: 2
- 33421-16
- RNCC: 5 | RNVC: 2
- 251394342
- 11-659-02
- RNCC: 3 | RNVC: 2
- SKE-4/10
- RNCC: 3 | RNVC: 2
- 251900500
- M3571-3ASH5PC5
- RNCC: 5 | RNVC: 2
- 251396944
- 302624
- RNCC: 5 | RNVC: 2
- 302624-2
- RNCC: 5 | RNVC: 2
- STD1584
- RNCC: 6 | RNVC: 9
- 251338633
- SVW-10-SR
- RNCC: 3 | RNVC: 2
- 260560
- RNCC: 3 | RNVC: 2
- BSVW10SR
- RNCC: 3 | RNVC: 2
- 303991
- RNCC: 5 | RNVC: 2
- DELAVNM148
- RNCC: 6 | RNVC: 9
- 251428596
- DIN2633-ND40/44,5
- RNCC: 2 | RNVC: 2
- 1252664
- RNCC: 5 | RNVC: 2
- 170714
- RNCC: 5 | RNVC: 2
- 251507621
- 623.7036
- RNCC: 3 | RNVC: 2
- 251372879
- 372024
- RNCC: 3 | RNVC: 2
- 372024-0
- RNCC: 3 | RNVC: 2
- STD1577
- RNCC: 6 | RNVC: 9
- 251208317
- 12-01-08
- RNCC: 3 | RNVC: 2