What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 99 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 99 of 185

4730-14-400-5813
Rallonge L=42

144005813
5034-1: RNCC: 3 | RNVC: 2
5034: RNCC: 5 | RNVC: 2

8 May 1985

4730-14-330-4453
Tube To Boss Straight Adapter

143304453
613-574-024-0: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-234-8784

4730-14-505-9454
Quick Disconnect Coupling Assembly

145059454
7225D002: RNCC: 3 | RNVC: 2

30 Mar 1998

4730-14-527-3838
Tube To Boss Straight Adapter

145273838
H145306B: RNCC: 3 | RNVC: 2

24 Oct 2001

4730-14-503-2031
Hose Coupling Assembly

145032031
RP1B500056400: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-524-5203
Tube To Boss Straight Adapter

145245203
806201: RNCC: 3 | RNVC: 2

21 Mar 2001

4730-14-510-7556
Flange To Hose Straight Adapter

145107556
45391515: RNCC: 3 | RNVC: 2

10 Nov 1998

4730-14-398-9840
Self-Sealing Coupling Assembly

143989840
223723: RNCC: 3 | RNVC: 2

6 Mar 1985

4730-14-470-2794
Sediment Strainer Element

144702794
BSNGCGF004F29A: RNCC: 3 | RNVC: 2
BSNGCGF005F29A: RNCC: 5 | RNVC: 2
BSNGCGF006F29A: RNCC: 5 | RNVC: 2
BSNGCGF009F22A: RNCC: 5 | RNVC: 2

14 Jun 1994

4730-14-507-2821
Quick Disconnect Coupling Half

145072821
3919063: RNCC: 3 | RNVC: 2

24 Jun 1998

4730-14-523-6239
Tube To Boss Straight Adapter

145236239
222-41: RNCC: 3 | RNVC: 2

31 Jan 2001

4730-14-214-5220

4730-14-219-8941

4730-14-297-8965
Bloc De Derivation

142978965
411MA0162FB30: RNCC: 3 | RNVC: 2
411MA162FB30: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-564-5978
Fluid Pressure Line Multiple Connector

145645978
46802241: RNCC: 3 | RNVC: 2

11 May 2010

4730-14-295-9178
Purgeur Verin De Bl

142959178
284339: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-354-7555
Equi Raccord Orient

143547555
150468: RNCC: 3 | RNVC: 2

20 Feb 1979

4730-14-299-7422

4730-14-564-3353
Hose Clamp

145643353
1169.00: RNCC: 3 | RNVC: 2

23 Apr 2010

4730-14-253-0784
Bouchon Filete Spec

142530784
T0P7G532: RNCC: 3 | RNVC: 2
TOP7G532: RNCC: 5 | RNVC: 2

1 Jan 1968

4730-14-203-6526

4730-14-423-1866
Hose To Grooved Clamp Coupling Straight Adapter

144231866
94908: RNCC: 3 | RNVC: 2

7 Apr 1988

4730-14-429-9389
Pipe Flange

144299389
DLT058337: RNCC: 3 | RNVC: 2

17 Feb 1989

4730-14-417-3227
Pipeline Flexible Spacer

144173227
ERV32ROUGE BRIDES INOX: RNCC: 3 | RNVC: 2

6 Jul 1987

4730-14-477-8396
Tube To Boss Straight Adapter

144778396
101160601010: RNCC: 3 | RNVC: 2

27 Sep 1995

4730-14-548-8554
Tube Coupling

145488554
0000390320: RNCC: 3 | RNVC: 2

20 Feb 2006

4730-14-041-2572
Tube Tee

140412572
1TR25X10X25NN: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-372-4626
Tube Coupling

143724626
CR81R21CUPR0ALU: RNCC: 3 | RNVC: 2

1 Sep 1981

4730-14-319-5502
Tube To Boss Straight Adapter

143195502
HM44133: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-260-9258
Pipe Flange

142609258
7062DB1F1F292XC18: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-523-2397
Bulkhead Hose Connector

145232397
RA1M543404190A1: RNCC: 3 | RNVC: 2

10 Jan 2001

4730-14-523-3027
Swivel Flange To Hose Straight Adapter

145233027
9001DAG4121201A: RNCC: 3 | RNVC: 2

10 Jan 2001

4730-14-312-0220
Sediment Strainer Element

143120220
26250957: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-432-2545
Tube Repair Plug

144322545
NCHX01H013EF5REP11TAMPON: RNCC: 3 | RNVC: 2
NCHX01H013DF5REP11TAMPON: RNCC: 5 | RNVC: 2

31 May 1989

4730-14-537-1437
Pipe Clamp Coupling

145371437
MR2086067006721: RNCC: 3 | RNVC: 2

2 Oct 2003

4730-14-310-7629
Pipe Flange

143107629
3500282: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-548-5357
Lubricant Pressure Relief Fitting

145485357
VA4247: RNCC: 3 | RNVC: 2
91792116: RNCC: 5 | RNVC: 2

25 Jan 2006

4730-14-494-0884
Hydraulic System Accessories Manifold

144940884
202420206640: RNCC: 3 | RNVC: 2
F300 0T 015 4250: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-287-0553
Pipe Flange

142870553
RUAN7625M221P32: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-503-2028
Hose Coupling Assembly

145032028
RP1A500055320: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-309-9163
Tube To Boss Straight Adapter

143099163
S418161: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-230-7162
Pipe Flange

142307162
GSM1487DET15: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-258-9124
Tube To Boss Straight Adapter

142589124
20630: RNCC: 3 | RNVC: 9

1 Jan 1969

4730-14-348-7245
Self-Sealing Coupling Assembly

143487245
711L420: RNCC: 3 | RNVC: 2

19 Apr 1978

4730-14-202-3749
Fluid Pressure Line Multiple Connector

142023749
R13010: RNCC: 3 | RNVC: 2
99058266: RNCC: 5 | RNVC: 2
99058266: RNCC: 5 | RNVC: 2
RA13010: RNCC: 5 | RNVC: 2
902800: RNCC: 5 | RNVC: 9

1 Jan 1963

4730-14-467-7634
Drainage Pipe Lateral

144677634
0322847160: RNCC: 3 | RNVC: 2

27 Jan 1994

4730-14-202-5290
Tube Tee

142025290
R080608: RNCC: 3 | RNVC: 2
R14067: RNCC: 5 | RNVC: 2
R8X6X8: RNCC: 5 | RNVC: 2

1 Jan 1963

4730-14-448-0915
Bulkhead Hose Connector

144480915
DA2C813310005: RNCC: 3 | RNVC: 2

12 Jun 1991

4730-14-431-8009
Tube Coupling Inverted Nut

144318009
SRC0600901: RNCC: 3 | RNVC: 2

10 May 1989

4730-14-542-7065
Tube Coupling

145427065
471750290: RNCC: 3 | RNVC: 2

28 Jul 2004

4730-14-449-7291
Pipe Elbow Assembly

144497291
721B926: RNCC: 3 | RNVC: 2
89232736: RNCC: 5 | RNVC: 2

4 Sep 1991

4730-14-472-9464
Fluid Flow Restrictor

144729464
B3051FD004F24ADIA0,60: RNCC: 3 | RNVC: 2

16 Nov 1994

4730-14-216-1160
Tube Fitting Brazing Ferrule

142161160
81619: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-238-6950
Tube To Boss Straight Adapter

142386950
19125: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-239-8092
Tube Fitting Flared Sleeve

142398092
520149: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-363-4831
Air Hose Connector

143634831
BJM00238: RNCC: 3 | RNVC: 2

9 May 1980

4730-14-403-3384
Quick Disconnect Coupling Half

144033384
221671: RNCC: 3 | RNVC: 2

21 Aug 1985

4730-14-388-5130
Tube Tee

143885130
TI21: RNCC: 3 | RNVC: 9

3 Nov 1983

4730-14-545-1214
Tube To Boss Straight Adapter

145451214
460695C: RNCC: 3 | RNVC: 2

18 Mar 2005

4730-14-231-1874
Sediment Strainer Element

142311874
216859: RNCC: 3 | RNVC: 2
216869: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-287-0584
Pipe Flange

142870584
RUAN7625M913P19D: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-552-8391
Fluid Pressure Line Multiple Connector

145528391
WH08LMKDSCF: RNCC: 3 | RNVC: 2
435808: RNCC: 5 | RNVC: 2

7 Feb 2007

4730-14-538-5067
Tube Coupling Assembly

145385067
NGM0010059053270: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-409-6316
Bulkhead Hose Connector

144096316
DA1D203535951U1: RNCC: 3 | RNVC: 2

28 May 1986

4730-14-554-0356
Pipe To Tube Straight Adapter

145540356
228 301: RNCC: 3 | RNVC: 2
228 301: RNCC: 3 | RNVC: 2

7 Jun 2007

4730-14-307-1851
Fluid Pressure Line Multiple Connector

143071851
1030430033: RNCC: 3 | RNVC: 2
1030430033: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-459-3371
Quick-Disconnect Nipple

144593371
6FCSM10SS: RNCC: 3 | RNVC: 9

26 Nov 1992

4730-14-447-2106
Tube To Gas Fitting Straight Adapter

144472106
BN325 526F4REPN: RNCC: 3 | RNVC: 2

3 May 1991

4730-14-287-8558

4730-14-337-0035

4730-14-441-0376
Tube To Boss Straight Adapter

144410376
G04724: RNCC: 3 | RNVC: 2
3704-94: RNCC: 5 | RNVC: 2

16 Aug 1990

4730-14-518-7065
Tube Tee

145187065
HTEXX000038: RNCC: 3 | RNVC: 9

15 Feb 2000

4730-14-335-1375
Pipeline Flexible Spacer

143351375
I131NTH125PN16: RNCC: 2 | RNVC: 2
DILNTH125PN16: RNCC: 3 | RNVC: 2
DILNTH125PN16: RNCC: 5 | RNVC: 9

3 Jun 1976

4730-14-525-7924
Tube To Boss Straight Adapter

145257924
F145344: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-415-2053
Tube Tee

144152053
4730HEEG088,9X8: RNCC: 2 | RNVC: 2
U1238F12DE88,9X8: RNCC: 5 | RNVC: 2

17 Apr 1987

4730-14-356-6873

4730-14-477-2348
Bulkhead Hose Connector

144772348
74553: RNCC: 3 | RNVC: 2

2 Aug 1995

4730-14-490-3451
Tube Coupling

144903451
114M26003E1: RNCC: 3 | RNVC: 2

24 Sep 1997

4730-14-546-9475
Tube Tee

145469475
717064: RNCC: 3 | RNVC: 2

12 Sep 2005

4730-14-203-2193
Tube-Hose Fitting Compression Sleeve

142032193
0000350833: RNCC: 3 | RNVC: 2
0000350833: RNCC: 5 | RNVC: 9
350833: RNCC: 5 | RNVC: 9

1 Jan 1963

4730-14-500-9834
Pipe To Tube Straight Adapter

145009834
A32077: RNCC: 3 | RNVC: 2
F300 0T 025 0047: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-514-8953
Return Tube Bend

145148953
7966: RNCC: 3 | RNVC: 2

23 Jun 1999

4730-14-442-4770
Fluid Pressure Line Multiple Connector

144424770
517067: RNCC: 3 | RNVC: 2
571067: RNCC: 5 | RNVC: 9
F300 0T 009 9642: RNCC: 6 | RNVC: 9

17 Oct 1990

4730-14-331-1275
Tube To Boss Straight Adapter

143311275
9914447: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-523-7389
Tube To Boss Straight Adapter

145237389
Z4837543: RNCC: 3 | RNVC: 2

31 Jan 2001

4730-14-434-3067
Fluid Pressure Line Multiple Connector

144343067
553153: RNCC: 3 | RNVC: 2

20 Sep 1989

4730-14-244-3587
Pipe Flange

142443587
13693: RNCC: 3 | RNVC: 2
13693: RNCC: 5 | RNVC: 2

1 Jan 1968

4730-14-226-4116
Tube To Boss Straight Adapter

142264116
0069490: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-452-2342
Selecteur Maximum

144522342
6191102: RNCC: 3 | RNVC: 2

8 Jan 1992

4730-14-369-2738

4730-14-297-7670

4730-14-335-9345
Tube Tee

143359345
Q0-1R10X6X10: RNCC: 3 | RNVC: 2

24 Jul 1976

4730-14-557-8928
Flange To Tube Elbow

145578928
WFS62/16SCFX: RNCC: 3 | RNVC: 2
A231004000167: RNCC: 5 | RNVC: 2

28 Jul 2008

4730-14-334-2495
Tube Tee

143342495
GSM163-015F25: RNCC: 3 | RNVC: 2
GSM163-15F25: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-367-5311
Tube To Boss Straight Adapter

143675311
05 151 20 20+05 010 20: RNCC: 3 | RNVC: 2
9956801: RNCC: 3 | RNVC: 2
9956801: RNCC: 5 | RNVC: 2
461-20-20: RNCC: 5 | RNVC: 9

19 Jan 1981

4730-14-324-7761
Tube Tee

143247761
GSM163-004F7AVECECROUSRACCORD: RNCC: 3 | RNVC: 2
GSM163-04F7AVECECR0USRACC0RD: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-402-7629
Tube Tee

144027629
9760-122: RNCC: 3 | RNVC: 9
9760-78: RNCC: 5 | RNVC: 1

19 Jul 1985

4730-14-429-1754
Tube To Boss Straight Adapter

144291754
P4-12-14-12-17CYLNU: RNCC: 3 | RNVC: 2
P4-12-14/12-17CYLNU: RNCC: 5 | RNVC: 2
91737914: RNCC: 5 | RNVC: 9

11 Jan 1989

4730-14-268-8722
Tube Tee

142688722
631X6114: RNCC: 3 | RNVC: 2
TR2-664-631X6114: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-569-5280
Pipe Flange

145695280
6542514: RNCC: 3 | RNVC: 2

23 Sep 2011

4730-14-475-1712
Tube To Boss Straight Adapter

144751712
8931038424: RNCC: 3 | RNVC: 2
8931038424: RNCC: 5 | RNVC: 2
72334898: RNCC: 5 | RNVC: 2
5000805088: RNCC: 5 | RNVC: 2

22 Mar 1995

4730-14-523-8800
Quick-Disconnect Nipple

145238800
045013-050: RNCC: 3 | RNVC: 9

8 Feb 2001

4730-14-320-2960
Fluid Passage Bolt

143202960
0064711370: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-572-6772
Threaded Tube Fitting Plug

145726772
0580024: RNCC: 3 | RNVC: 2
91909924: RNCC: 5 | RNVC: 2

24 Jul 2012

4730-14-537-0112
Return Tube Bend

145370112
11050101: RNCC: 3 | RNVC: 2

24 Sep 2003

4730-14-387-0384
Quick Disconnect Coupling Half

143870384
1030114: RNCC: 3 | RNVC: 2

24 Aug 1983

4730-14-466-7871
Fluid Flow Restrictor

144667871
25459993: RNCC: 3 | RNVC: 2
RAB2216: RNCC: 5 | RNVC: 2
25459993: RNCC: 5 | RNVC: 9

26 Nov 1993

4730-14-306-1235
Tube Fitting Clinch Sleeve

143061235
91241000: RNCC: 3 | RNVC: 2
VDP4896: RNCC: 5 | RNVC: 2
AB10: RNCC: 5 | RNVC: 9
BAH10: RNCC: 5 | RNVC: 9
BAS10: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-294-9549
Tube Tee

142949549
10A18: RNCC: 3 | RNVC: 2
T18: RNCC: 3 | RNVC: 2
17-18: RNCC: 3 | RNVC: 2
TA18N: RNCC: 3 | RNVC: 2
91603952: RNCC: 5 | RNVC: 2
10A18: RNCC: 5 | RNVC: 9
210100018: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-496-3619
Tube To Boss Straight Adapter

144963619
176655: RNCC: 3 | RNVC: 2
F300 0T 021 4476: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-555-8208
Fluid Passage Bolt

145558208
0301040860: RNCC: 3 | RNVC: 2

17 Dec 2007

4730-14-328-4336
Tube To Boss Straight Adapter

143284336
12-28-33X200: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-327-6176
Bulkhead Hose Connector

143276176
0264351140: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-369-9232
Tube To Boss Straight Adapter

143699232
7453P: RNCC: 3 | RNVC: 9
7453: RNCC: 5 | RNVC: 9
7453: RNCC: 5 | RNVC: 9

18 May 1981

4730-14-031-1165
Fluid Pressure Line Multiple Connector

140311165
1338400008: RNCC: 3 | RNVC: 2
13384000: RNCC: 5 | RNVC: 2
0870203200: RNCC: 5 | RNVC: 2
0870203200: RNCC: 5 | RNVC: 9

14 Jun 1980

4730-14-495-7322
Tube To Boss Straight Adapter

144957322
203024011008A: RNCC: 3 | RNVC: 9
F300 0T 019 7626: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-526-9371
Quick Disconnect Coupling Half

145269371
00420054: RNCC: 3 | RNVC: 2
00420054: RNCC: 6 | RNVC: 9

19 Sep 2001

4730-14-330-9979
Fluid Pressure Line Multiple Connector

143309979
0000280892: RNCC: 3 | RNVC: 2
0000280892: RNCC: 5 | RNVC: 9
280892: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-248-9715
Fluid Passage Bolt

142489715
352038: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-353-4872

4730-14-378-0086
Tube To Boss Straight Adapter

143780086
16558839: RNCC: 3 | RNVC: 2
16558839: RNCC: 5 | RNVC: 9

20 Jul 1982

4730-14-429-4288
Pipe Flange

144294288
213530151: RNCC: 3 | RNVC: 2

23 Jan 1989

4730-14-309-5577
Bossage Filete Exte

143095577
0000350970: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-316-7122

4730-14-355-5589

4730-14-326-8331

4730-14-224-2657
Lubricating Oil Cup

142242657
14906: RNCC: 3 | RNVC: 2
14906: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-299-8186
Tube To Boss Straight Adapter

142998186
269057: RNCC: 3 | RNVC: 2
70012351: RNCC: 3 | RNVC: 2
269057: RNCC: 5 | RNVC: 9
70012351: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-502-7771
Return Tube Bend

145027771
6V9005: RNCC: 3 | RNVC: 2

17 Dec 1997

4730-14-419-2932
Tube To Boss Straight Adapter

144192932
544342: RNCC: 3 | RNVC: 2

16 Oct 1987

4730-14-479-1618
Tube Coupling

144791618
IT6702CROQI2877ADAPTATEUR INOX: RNCC: 3 | RNVC: 9

18 Dec 1995

4730-14-296-7804
Tube To Boss Straight Adapter

142967804
3027580: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-283-5488
Tube To Boss Straight Adapter

142835488
271944: RNCC: 3 | RNVC: 2
271944: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-253-7904

4730-14-559-5380
Tube Elbow

145595380
3139 04 00: RNCC: 3 | RNVC: 2
B10153: RNCC: 5 | RNVC: 2

22 Jan 2009

4730-14-332-0642
Bulkhead Hose Connector

143320642
R5812Z38: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-418-9903
Kit Clapet Contre P

144189903
4862000214: RNCC: 3 | RNVC: 2

28 Sep 1987

4730-14-520-3145
Tube To Boss Straight Adapter

145203145
27148961-5: RNCC: 3 | RNVC: 2

17 May 2000

4730-14-366-5879

4730-14-416-2016
Quick Disconnect Coupling Half

144162016
0285320890: RNCC: 3 | RNVC: 2

3 Jun 1987

4730-14-366-7738
Fluid Pressure Line Multiple Connector

143667738
158083: RNCC: 3 | RNVC: 2

20 Nov 1980

4730-14-379-1418
Tube To Boss Straight Adapter

143791418
0000252230: RNCC: 3 | RNVC: 2

6 Sep 1982

4730-14-236-8078
Sediment Strainer Element

142368078
28526A: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-508-8505
Sediment Strainer Element

145088505
06.2000.01: RNCC: 3 | RNVC: 2

30 Sep 1998

4730-14-042-9098
Fluid Pressure Line Multiple Connector

140429098
A21A221278020: RNCC: 3 | RNVC: 2

1 Sep 1981

4730-14-231-3274
Tube Tee

142313274
40211: RNCC: 3 | RNVC: 2
1041000NU: RNCC: 3 | RNVC: 2
906631: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-480-5214
Hose Connector Sleeve

144805214
90 11 09: RNCC: 3 | RNVC: 2

14 Mar 1996

4730-14-365-1311
Fluid Pressure Line Multiple Connector

143651311
209214: RNCC: 3 | RNVC: 2

2 Sep 1980

4730-14-432-4456
Pipe Flange

144324456
X555878: RNCC: 3 | RNVC: 2

13 Jun 1989

4730-14-538-9876
Tube Coupling Assembly

145389876
NGM0054919126717: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-339-8352
Pipe Flange

143398352
AS34TV108F30A: RNCC: 3 | RNVC: 2

18 Jan 1977

4730-14-372-1318
Tube To Boss Straight Adapter

143721318
NO PRIMARY REF14-372-1318: RNCC: 3 | RNVC: 2
XGE20SMED: RNCC: 5 | RNVC: 2
4-7515-02: RNCC: 5 | RNVC: 9
4.7515.02: RNCC: 5 | RNVC: 9
4751502: RNCC: 5 | RNVC: 9
XGE20SMED: RNCC: 5 | RNVC: 9

1 Sep 1981

4730-14-461-3333
Tube Coupling Assembly

144613333
A.GEV-14S-WPT-3/8: RNCC: 3 | RNVC: 2

8 Mar 1993

4730-14-372-4375
Cloche Degagement A

143724375
BN324-509DN100: RNCC: 3 | RNVC: 2

1 Sep 1981

4730-14-423-4115
Pipe Flange

144234115
UA50088006PN50-11C1DN65: RNCC: 2 | RNVC: 2
4730HCPN50DN06511C1: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-333-5282
Tube To Boss Straight Adapter

143335282
GSM164-041F12: RNCC: 3 | RNVC: 2
GSM164-05F59: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-408-3536
Alimentation Verrou

144083536
LS08-015-01: RNCC: 3 | RNVC: 2

19 Mar 1986

4730-14-564-5569
Tube To Boss Straight Adapter

145645569
GE25SR3/4EDOMDCF: RNCC: 3 | RNVC: 2
A231004000326: RNCC: 5 | RNVC: 2

5 May 2010

4730-14-215-1536
Raccord Special Equ

142151536
606-10-90: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-324-0772
Tube Fitting Brazing Ferrule

143240772
R35028SMREP25: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-526-8281
Tube To Boss Straight Adapter

145268281
5010429969: RNCC: 3 | RNVC: 2

7 Sep 2001

4730-14-369-4425
Quick Disconnect Coupling Half

143694425
MF10: RNCC: 3 | RNVC: 2

17 Apr 1981

4730-14-355-2036
Tube Coupling

143552036
093656: RNCC: 3 | RNVC: 2
093656A: RNCC: 5 | RNVC: 2

19 Mar 1979

4730-14-554-1085
Pipe Flange

145541085
352 1048: RNCC: 3 | RNVC: 2
352 1048: RNCC: 3 | RNVC: 2

11 Jun 2007

4730-14-407-2189
Fluid Pressure Line Multiple Connector

144072189
601415: RNCC: 3 | RNVC: 2

12 Feb 1986

4730-14-357-0963
Hydraulic System Accessories Manifold

143570963
79065688: RNCC: 3 | RNVC: 2
79065688: RNCC: 5 | RNVC: 9

7 Jun 1979

4730-14-500-2504
Tube To Boss Straight Adapter

145002504
377612X1: RNCC: 3 | RNVC: 2
F300 0T 024 2560: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-399-9750
Fluid Pressure Line Multiple Connector

143999750
351146: RNCC: 3 | RNVC: 2
396562146: RNCC: 5 | RNVC: 9
DBA351146: RNCC: 5 | RNVC: 9

24 Apr 1985

4730-14-370-2627
Tube-Hose Fitting Compression Sleeve

143702627
S2794CF: RNCC: 3 | RNVC: 2

18 May 1981

4730-14-267-3466
Pipe Flange

142673466
0206990090: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-536-0473
Tube To Hose Straight Adapter

145360473
PE65407E10: RNCC: 3 | RNVC: 2

9 Jul 2003

4730-14-525-2137
Tube To Boss Straight Adapter

145252137
3413372025: RNCC: 3 | RNVC: 2
06470P022008: RNCC: 3 | RNVC: 2

23 May 2001

4730-14-416-5847
Pipe Flange

144165847
4730GG-DN133: RNCC: 2 | RNVC: 2
MEC10421: RNCC: 3 | RNVC: 2
4730GG-DN133: RNCC: 5 | RNVC: 2

19 Jun 1987

4730-14-283-5490
Tube To Boss Straight Adapter

142835490
262263: RNCC: 3 | RNVC: 2
262263: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-505-4986
Pipe Elbow Assembly

145054986
60200605: RNCC: 3 | RNVC: 9

18 Mar 1998

4730-14-518-5075
Tube To Boss Straight Adapter

145185075
HBRXX000007: RNCC: 3 | RNVC: 9

9 Feb 2000

4730-14-503-2042
Tube Coupling

145032042
RA1M504050126: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-292-2034
Pipe Flange

142922034
RUHF33C1: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-362-4969
Tube Coupling

143624969
002851282P: RNCC: 3 | RNVC: 2

19 Mar 1980

4730-14-417-3229
Pipeline Flexible Spacer

144173229
ERV40ROUGE BRIDES INOX: RNCC: 3 | RNVC: 2

6 Jul 1987

4730-14-260-9280
Pipe Flange

142609280
7062DC1F1F66XC18: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-354-7559
Pipe Flange

143547559
150473: RNCC: 3 | RNVC: 2

20 Feb 1979

4730-14-351-7671
Fuel Feeder Manifold

143517671
02542823700: RNCC: 3 | RNVC: 2
025428237: RNCC: 5 | RNVC: 2

12 Sep 1978

4730-14-434-3062
Hydraulic Manifold Assembly

144343062
553439: RNCC: 3 | RNVC: 2

20 Sep 1989

4730-14-552-5960
Tube To Gas Fitting Straight Adapter

145525960
6501MPA007A: RNCC: 3 | RNVC: 2

18 Jan 2007

4730-14-503-1682
Bulkhead Hose Connector

145031682
RA1M523303190: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-263-7477
Tube Tee

142637477
T15: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-336-2812
Self-Sealing Coupling Assembly

143362812
34N0042: RNCC: 3 | RNVC: 2

24 Jul 1976

4730-14-032-3081
Tube To Boss Straight Adapter

140323081
8401309666: RNCC: 3 | RNVC: 2

20 Jul 1982

4730-14-552-5976
Flange To Boss Straight Adapter

145525976
RA1B210108281: RNCC: 3 | RNVC: 2

18 Jan 2007

4730-14-500-7805
Swivel Flange To Hose Elbow

145007805
C8UBFR12M16: RNCC: 3 | RNVC: 2
F300 0T 024 8004: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-215-2423
Raccord Special

142152423
SKC3088A: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-356-2215
Fluid Pressure Line Multiple Connector

143562215
79401000: RNCC: 3 | RNVC: 2
70120168: RNCC: 5 | RNVC: 2
70120168: RNCC: 5 | RNVC: 9
79401000: RNCC: 5 | RNVC: 9

25 Apr 1979

4730-14-548-3261
Bulkhead Hose Connector

145483261
10544211: RNCC: 3 | RNVC: 2

8 Jan 2006

4730-14-487-5437
Flange To Tube Elbow

144875437
RA1M521304091U1: RNCC: 3 | RNVC: 2

10 Apr 1997

4730-14-490-0924
Self-Sealing Coupling Assembly

144900924
46690090: RNCC: 3 | RNVC: 2

10 Sep 1997

4730-14-380-9958
Hose Coupling Assembly

143809958
300147: RNCC: 3 | RNVC: 9

14 Dec 1982

4730-14-394-7295
Tube Coupling

143947295
97312080: RNCC: 3 | RNVC: 9

28 Aug 1984

4730-14-464-4169
Tube To Boss Straight Adapter

144644169
23S10050: RNCC: 3 | RNVC: 2
23S10050: RNCC: 5 | RNVC: 2

28 Jul 1993

4730-14-298-8058
Tube To Boss Straight Adapter

142988058
161076: RNCC: 3 | RNVC: 2
16107600: RNCC: 5 | RNVC: 2
16107600: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-497-1455
Fluid Pressure Line Multiple Connector

144971455
182-310163: RNCC: 3 | RNVC: 2
F300 0T 022 7036: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-389-4147
Hose To Boss Straight Adapter

143894147
6169969: RNCC: 3 | RNVC: 2
FOE6169969: RNCC: 5 | RNVC: 9

20 Dec 1983

4730-14-515-6882
Tube To Boss Straight Adapter

145156882
1165282000: RNCC: 3 | RNVC: 2

23 Jul 1999

4730-14-554-5947
Tube Fitting Insert

145545947
0000510030: RNCC: 3 | RNVC: 2

23 Jul 2007

4730-14-518-0179
Tube To Boss Straight Adapter

145180179
5010115357: RNCC: 3 | RNVC: 2

21 Jan 2000

4730-14-373-5887
Tube To Boss Straight Adapter

143735887
VDP7571: RNCC: 3 | RNVC: 2

13 Nov 1981

4730-14-505-3398
Self-Sealing Coupling Assembly

145053398
PPF88M16: RNCC: 3 | RNVC: 2

18 Mar 1998

4730-14-031-6551
Tube To Boss Straight Adapter

140316551
S3051LM03AREP1: RNCC: 3 | RNVC: 2

14 Jun 1980

4730-14-401-9223
Tube To Gas Fitting Straight Adapter

144019223
34600006: RNCC: 3 | RNVC: 2

13 Jun 1985

4730-14-397-7218
Tube To Hose Straight Adapter

143977218
9968725: RNCC: 3 | RNVC: 2
5721040911: RNCC: 5 | RNVC: 2

14 Dec 1984

4730-14-401-1151
Tube To Boss Straight Adapter

144011151
0800-09041: RNCC: 3 | RNVC: 2

29 May 1985

4730-14-401-1052
Tube To Boss Straight Adapter

144011052
605136: RNCC: 3 | RNVC: 2

29 May 1985

4730-14-545-1927
Bulkhead Hose Connector

145451927
S717A20T1009: RNCC: 3 | RNVC: 2

23 Mar 2005

4730-14-250-6855

4730-14-331-5799

4730-14-281-0542

4730-14-213-8280
Boulon A Passage De

142138280
155548: RNCC: 3 | RNVC: 2
155548: RNCC: 5 | RNVC: 2
155548: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-220-6375

4730-14-365-9824

4730-14-561-7829
Hose Clamp

145617829
12175: RNCC: 3 | RNVC: 2

7 Sep 2009

4730-14-414-5089
Tube To Boss Straight Adapter

144145089
Q15GAIS1BSP NU: RNCC: 3 | RNVC: 2
8454253466NU: RNCC: 5 | RNVC: 2

5 Feb 1987

4730-14-556-9610
Hose Coupling

145569610
D820 145: RNCC: 3 | RNVC: 2

24 Apr 2008

4730-14-031-9433

4730-14-434-1815
Fluid Pressure Line Multiple Connector

144341815
552751: RNCC: 3 | RNVC: 2

11 Sep 1989

4730-14-335-1361
Pipeline Flexible Spacer

143351361
I131NTE400PN16: RNCC: 2 | RNVC: 2
DILNTE400PN16: RNCC: 3 | RNVC: 2
DILNTE400PN16: RNCC: 5 | RNVC: 9

3 Jun 1976

4730-14-233-9455

4730-14-321-7421

4730-14-222-7295
Tube Tee

142227295
GSM1297FE3-18TABLEAU2: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-559-8372
Tube To Boss Straight Adapter

145598372
B1510M-04-04: RNCC: 3 | RNVC: 2

23 Feb 2009

4730-14-453-2833
Quick Disconnect Coupling Assembly

144532833
RBE06-1102-ODIAFB: RNCC: 3 | RNVC: 2
91727178: RNCC: 5 | RNVC: 2

12 Feb 1992

4730-14-283-6840
Quick Disconnect Coupling Half

142836840
E29-573-15-21MALE: RNCC: 2 | RNVC: 2
9698-12-151: RNCC: 3 | RNVC: 2
071021: RNCC: 5 | RNVC: 2
017021: RNCC: 5 | RNVC: 2
017021: RNCC: 5 | RNVC: 9
9698-12-151: RNCC: 5 | RNVC: 9
1600-15X21: RNCC: 5 | RNVC: 9
306-15X21: RNCC: 5 | RNVC: 9
0698-12-15X21: RNCC: 5 | RNVC: 9
F300 0T 005 9371: RNCC: 6 | RNVC: 9

1 Jan 1972

4730-14-322-9154

4730-14-250-7936

4730-14-231-0887
Tube Coupling Inverted Nut

142310887
R5518: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-482-1959
Pipe Flange

144821959
BN329627-F33: RNCC: 3 | RNVC: 2
RAB9350: RNCC: 5 | RNVC: 2

26 Jun 1996

4730-14-277-3025
Tube-Hose Fitting Compression Sleeve

142773025
7062CE1F2B30XC38: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-522-6215
Quick Disconnect Coupling Half

145226215
1509.40825C: RNCC: 3 | RNVC: 2
021240: RNCC: 3 | RNVC: 2
21240: RNCC: 5 | RNVC: 2
021240: RNCC: 5 | RNVC: 9

8 Nov 2000

4730-14-472-0121
Quick-Disconnect Nipple

144720121
420059: RNCC: 3 | RNVC: 2
0714 231 113: RNCC: 5 | RNVC: 2

30 Sep 1994

4730-14-446-2014
Tube To Boss Straight Adapter

144462014
CF1A12151: RNCC: 3 | RNVC: 2

6 Mar 1991

4730-14-375-7109
Tube To Boss Straight Adapter

143757109
8901101766: RNCC: 3 | RNVC: 2

26 Feb 1982

4730-14-535-9077
Threaded Tube Fitting Plug

145359077
SISNAMJH00100REP2: RNCC: 3 | RNVC: 2
SISNAMJH00100F6: RNCC: 3 | RNVC: 2

27 Jun 2003

4730-14-500-7571
Pipe Flange

145007571
D64281000004: RNCC: 3 | RNVC: 2
F300 0T 024 7770: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-541-9136
Tube Tee

145419136
8204L10 00: RNCC: 3 | RNVC: 2
8204L 10 00: RNCC: 5 | RNVC: 2

2 Jul 2004

4730-14-270-5026

4730-14-370-7897
Fluid Pressure Line Multiple Connector

143707897
13A4-8X100: RNCC: 3 | RNVC: 2

5 Jun 1981

4730-14-550-4374
Tube Tee

145504374
TEE30SRVOMDCF: RNCC: 3 | RNVC: 2
5010631290: RNCC: 5 | RNVC: 2
TEE30SRVOMDCF: RNCC: 5 | RNVC: 9

20 Jun 2006

4730-14-359-8769
Bride Later Mil Tbd

143598769
2-16452: RNCC: 3 | RNVC: 2

15 Oct 1979

4730-14-254-8161
Fluid Passage Bolt

142548161
271098: RNCC: 3 | RNVC: 2
271098: RNCC: 5 | RNVC: 9

1 Jan 1969

4730-14-495-9559
Hose To Boss Straight Adapter

144959559
A07051945: RNCC: 3 | RNVC: 2
MDCT22150MDCT22: RNCC: 3 | RNVC: 9
MDCT22150MDCT22150: RNCC: 5 | RNVC: 9
A07051945: RNCC: 5 | RNVC: 9
6F300 0T 022 0078: RNCC: 6 | RNVC: 9
F300 0T 020 5998: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-554-0415
Tube Tee

145540415
372 007: RNCC: 3 | RNVC: 2
372 007: RNCC: 3 | RNVC: 2

7 Jun 2007

4730-14-478-8222
Flange To Hose Elbow

144788222
23729: RNCC: 3 | RNVC: 2

22 Nov 1995

4730-14-315-1188
Fluid Pressure Line Multiple Connector

143151188
901MA0017F12REP51: RNCC: 3 | RNVC: 2
901MA017REP51: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-285-2693
Tube Tee

142852693
TL20: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-538-7810
Tube Coupling Assembly

145387810
NGM0011040358098: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-403-8757
Pipe Flange

144038757
CMT30E9053PL2TUYAU25: RNCC: 3 | RNVC: 2

28 Aug 1985

4730-14-377-8088
Tube To Boss Straight Adapter

143778088
8450046166: RNCC: 3 | RNVC: 2

10 Jun 1982

4730-14-264-1601

4730-14-214-4895

4730-14-360-7476

4730-14-484-9901
Soufflet Equipe

144849901
2920689B-REP61: RNCC: 3 | RNVC: 2

18 Dec 1996

4730-14-379-8500
Disposi Vid Raccord

143798500
156A25-1: RNCC: 3 | RNVC: 2
156A25-1: RNCC: 5 | RNVC: 2

20 Oct 1982

4730-14-572-2018
Tube Nipple

145722018
83389-1: RNCC: 3 | RNVC: 2
83389-1: RNCC: 5 | RNVC: 2

14 Jun 2012

4730-14-491-9525
Union

144919525
8-12X100: RNCC: 3 | RNVC: 2
F300 0T 006 2842: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-375-5054
Tube To Boss Straight Adapter

143755054
130-5-56: RNCC: 3 | RNVC: 2

26 Feb 1982

4730-14-403-0331
Tube To Boss Straight Adapter

144030331
F3BXS16-3-8: RNCC: 3 | RNVC: 2

25 Jul 1985

4730-14-379-9315
Tube Tee

143799315
7789: RNCC: 3 | RNVC: 9

20 Oct 1982

4730-14-346-6629
Tube To Boss Straight Adapter

143466629
BEL0G661REPB: RNCC: 3 | RNVC: 2

12 Dec 1977

4730-14-285-9666
Fluid Passage Bolt

142859666
15145413: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-403-0743
Bulkhead Hose Connector

144030743
8814726511: RNCC: 3 | RNVC: 2

25 Jul 1985

4730-14-547-1717
Bulkhead Hose Connector

145471717
93102921: RNCC: 3 | RNVC: 2
5005630167: RNCC: 5 | RNVC: 2
93102901: RNCC: 5 | RNVC: 9

30 Sep 2005

4730-14-416-5839
Pipe Flange

144165839
4730GG-DN38: RNCC: 2 | RNVC: 2
MEC10414: RNCC: 3 | RNVC: 2
4730GG-DN38: RNCC: 5 | RNVC: 2

19 Jun 1987

4730-14-389-6062
Tube Tee

143896062
J3BRAB6-1-4: RNCC: 3 | RNVC: 2
J3BRAB6-1-4: RNCC: 3 | RNVC: 2

20 Dec 1983

4730-14-514-9927
Tube To Boss Swivel Joint

145149927
9 AGB 06 06 KD: RNCC: 3 | RNVC: 2
9AGB0606KD: RNCC: 5 | RNVC: 2

25 Jun 1999

4730-14-480-8157
Quick Disconnect Coupling Half

144808157
QSU8-QSY7.8: RNCC: 3 | RNVC: 2

4 Apr 1996

4730-14-394-7494
Tube To Boss Straight Adapter

143947494
D500-1-4: RNCC: 3 | RNVC: 2

28 Aug 1984

4730-14-526-6823
Fuel Feeder Manifold

145266823
503580-2: RNCC: 3 | RNVC: 2

22 Aug 2001

4730-14-353-1045
Fluid Pressure Line Multiple Connector

143531045
C60-1: RNCC: 3 | RNVC: 2

8 Dec 1978

4730-14-277-2958
Return Tube Bend

142772958
A49182C88-9AUJ: RNCC: 2 | RNVC: 2
3D180-88-9MM: RNCC: 3 | RNVC: 2
3D180-88-9MM: RNCC: 3 | RNVC: 2
E29-044-88-9MM180: RNCC: 5 | RNVC: 2
3D180-88-9MM: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-449-2167
Quick Disconnect Coupling Assembly

144492167
017053-00: RNCC: 3 | RNVC: 2
228-002: RNCC: 5 | RNVC: 2
2280-02: RNCC: 5 | RNVC: 2
228002: RNCC: 5 | RNVC: 2

7 Aug 1991

4730-14-442-0160
Threaded Tube Fitting Plug

144420160
702A52-0011-20: RNCC: 3 | RNVC: 2

26 Sep 1990

4730-14-327-4695
Crepine Assechement

143274695
MAT145-0103: RNCC: 3 | RNVC: 2
401MA225F17ACIER: RNCC: 5 | RNVC: 2
GSM145-003F16: RNCC: 5 | RNVC: 2
GSM145-015F4ET27: RNCC: 5 | RNVC: 2
GSM145-03F16: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-371-1400
Tuyau Vidang Embout

143711400
30MS019-000001: RNCC: 3 | RNVC: 2

5 Jun 1981

4730-14-367-7472
Tube To Boss Straight Adapter

143677472
365A52-1029-20: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-457-6797
Tube Tee

144576797
J05403-03-0500P006: RNCC: 3 | RNVC: 2

10 Sep 1992

4730-14-407-4276
Tube To Boss Straight Adapter

144074276
12-10-10X100: RNCC: 3 | RNVC: 2
UMA10X10-100N: RNCC: 3 | RNVC: 2
99011060: RNCC: 5 | RNVC: 2
LL9101-10-60S: RNCC: 5 | RNVC: 2

12 Feb 1986

4730-14-424-6493
Tube To Hose Straight Adapter

144246493
4A25-15X21C0: RNCC: 3 | RNVC: 2
4A25-15X21CO: RNCC: 3 | RNVC: 9

2 Jun 1988

4730-14-324-1289
Tube Tee

143241289
Q1-5TR36X20X25NN: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-441-1309
Tube To Boss Straight Adapter

144411309
UMSI12M3-8NPT: RNCC: 3 | RNVC: 9
99151521: RNCC: 5 | RNVC: 2

22 Aug 1990

4730-14-432-4210
Pipe Elbow Assembly

144324210
BN325-522F3REPD-90DEG: RNCC: 2 | RNVC: 2
RAR1424: RNCC: 5 | RNVC: 2

12 Jun 1989

4730-14-427-4803
Tube Fitting Clinch Sleeve

144274803
S4710X0002-8262: RNCC: 3 | RNVC: 2
F0532S4710X0002-8262: RNCC: 3 | RNVC: 2
BR20: RNCC: 5 | RNVC: 2

20 Oct 1988

4730-14-204-3677
Fluid Passage Bolt

142043677
044-31-099: RNCC: 3 | RNVC: 2
0044310990: RNCC: 5 | RNVC: 2

1 Jan 1963

4730-14-457-7069
Pipe Fitting Flared Collar

144577069
89092-300: RNCC: 3 | RNVC: 2
RAR1553: RNCC: 5 | RNVC: 2
89092300: RNCC: 5 | RNVC: 2

16 Sep 1992

4730-14-212-1241
Pipe Flange

142121241
4730BX-133: RNCC: 2 | RNVC: 2
7068FDN133B12S: RNCC: 3 | RNVC: 2
7068F133: RNCC: 5 | RNVC: 9

5 Jul 1980

4730-14-222-6563
Tube Fitting Brazing Ferrule

142226563
GSM1297F1AF1BTABLEAU2D1-36I22: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-389-2771
Quick Disconnect Coupling Half

143892771
RBE11-6810: RNCC: 3 | RNVC: 2
RBE11-6810/IA: RNCC: 5 | RNVC: 2
RBE11-6810IA: RNCC: 5 | RNVC: 2
RBE11-6810: RNCC: 5 | RNVC: 2

29 Nov 1983

4730-14-239-3504
Raccord Multiple Sp

142393504
NO PRIMARY REF14-239-3504: RNCC: 3 | RNVC: 2
E137D922: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-430-7151
Bulkhead Hose Connector

144307151
PM1A724119010: RNCC: 3 | RNVC: 2
PM1A724119010: RNCC: 5 | RNVC: 2

22 Mar 1989

4730-14-282-1927

4730-14-554-0195
Tube To Boss Straight Adapter

145540195
372 088: RNCC: 3 | RNVC: 2
372 088: RNCC: 3 | RNVC: 2

7 Jun 2007

4730-14-481-7598
Fluid Passage Bolt

144817598
33 01 71: RNCC: 3 | RNVC: 2

30 May 1996

4730-14-226-8819
Tube To Boss Straight Adapter

142268819
GSM1322DN48TABLEAU2: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-406-1176
Fluid Passage Bolt

144061176
80227: RNCC: 3 | RNVC: 2

8 Jan 1986

4730-14-418-0916
Fluid Pressure Line Multiple Connector

144180916
5630963: RNCC: 3 | RNVC: 2
FOE5630963: RNCC: 5 | RNVC: 9

6 Aug 1987

4730-14-450-4424
Pipe Flange

144504424
4730HBPN16DN200: RNCC: 2 | RNVC: 2

9 Oct 1991

4730-14-561-6032
Return Tube Bend

145616032
6C4OMLOS: RNCC: 3 | RNVC: 2
20 250 100 1310: RNCC: 5 | RNVC: 2

3 Aug 2009

4730-14-239-6887

4730-14-548-8558
Tube Coupling

145488558
0298731050: RNCC: 3 | RNVC: 2

20 Feb 2006

4730-14-351-0213
Tube To Boss Straight Adapter

143510213
209826: RNCC: 3 | RNVC: 2

10 Aug 1978

4730-14-251-9151
Fluid Pressure Line Multiple Connector

142519151
99630121851: RNCC: 3 | RNVC: 2
53J21: RNCC: 5 | RNVC: 9
91H637: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-335-1385
Pipeline Flexible Spacer

143351385
I131NTH723MAR: RNCC: 2 | RNVC: 2
DILNTH723MAR: RNCC: 3 | RNVC: 2
DILNTH723MAR: RNCC: 5 | RNVC: 9

3 Jun 1976

4730-14-382-9898
Tube To Boss Straight Adapter

143829898
99648212113: RNCC: 3 | RNVC: 2
1212113: RNCC: 3 | RNVC: 2

17 Mar 1983

4730-14-549-0163
Tube-Hose Fitting Compression Sleeve

145490163
0301531060: RNCC: 3 | RNVC: 2

1 Mar 2006

4730-14-381-5359
Fluid Pressure Line Multiple Connector

143815359
218682: RNCC: 3 | RNVC: 2

25 Jan 1983

4730-14-341-8078

4730-14-263-3246
Raccord Allonge

142633246
PT2308: RNCC: 3 | RNVC: 9

1 Jan 1970

4730-14-290-9514
Bulkhead Hose Connector

142909514
000MA1050F22REPPM14D1: RNCC: 3 | RNVC: 2
000MA022F33REPPM14D1: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-345-0200
Tube To Boss Straight Adapter

143450200
3200914: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-333-3098
Tube To Boss Straight Adapter

143333098
AS34TV135F7A: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-273-5347
Pipe Flange

142735347
7062TC1F1F48UA9NFEM: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-511-9318
Tube Tee

145119318
T24: RNCC: 3 | RNVC: 2

28 Jan 1999

4730-14-470-5175
Pipe Flange

144705175
1074092D00: RNCC: 3 | RNVC: 2

22 Jun 1994

4730-14-345-4725
Tube Repair Plug

143454725
A4584REP8: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-254-2692
Tube To Boss Straight Adapter

142542692
A5660: RNCC: 3 | RNVC: 2
A6306: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-262-4541

4730-14-332-9806

4730-14-543-8781
Tube To Boss Straight Adapter

145438781
560503444: RNCC: 3 | RNVC: 2

14 Dec 2004

4730-14-378-6547

4730-14-252-1719
Tube Fitting Brazing Ferrule

142521719
17522: RNCC: 3 | RNVC: 2
17522: RNCC: 5 | RNVC: 2

1 Jan 1968

4730-14-263-7600
Tube Tee

142637600
DLT001918: RNCC: 3 | RNVC: 2
DLT001918: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-516-3887
Tube To Boss Straight Adapter

145163887
205908: RNCC: 3 | RNVC: 2

22 Sep 1999

4730-14-523-7003
Tube To Boss Straight Adapter

145237003
P4237510: RNCC: 3 | RNVC: 2

31 Jan 2001

4730-14-273-5348
Pipe Flange

142735348
7062TC1F1F57UA9NFEM: RNCC: 2 | RNVC: 2
4730CE-57F: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-451-9276
Quick Disconnect Plug

144519276
HD 05152 00: RNCC: 3 | RNVC: 2
HA0515200: RNCC: 5 | RNVC: 2

11 Dec 1991

4730-14-542-1986
Tube To Boss Straight Adapter

145421986
553182808: RNCC: 3 | RNVC: 2
553182808: RNCC: 5 | RNVC: 9

8 Jul 2004

4730-14-306-4495
Fluid Passage Bolt

143064495
0249922710: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-304-0092
Pipeline Flexible Spacer

143040092
AS34TV116CF5: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-330-9947
Pipe Flange

143309947
0000441155: RNCC: 3 | RNVC: 2
0000441155: RNCC: 5 | RNVC: 9
441155: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-365-1258
Tube Tee

143651258
R8X8X10L: RNCC: 3 | RNVC: 2

2 Sep 1980

4730-14-382-8726
Tube To Boss Straight Adapter

143828726
PE60841H16: RNCC: 3 | RNVC: 2

17 Feb 1983

4730-14-427-4475
Tube Tee

144274475
4730JCEG139,7X10: RNCC: 2 | RNVC: 2

20 Oct 1988

4730-14-220-6870

4730-14-455-9270
Raccor Demi-Manchon

144559270
PM1A729009263: RNCC: 3 | RNVC: 2
PM1A729009263: RNCC: 5 | RNVC: 2

11 Jun 1992

4730-14-415-1960
Tube Tee

144151960
4730HEEG021,3X2,6: RNCC: 2 | RNVC: 2
U1238F12DE21,3X2,6: RNCC: 5 | RNVC: 2

17 Apr 1987

4730-14-451-3599
Fluid Flow Restrictor

144513599
540189DIA7-5: RNCC: 3 | RNVC: 2

14 Nov 1991

4730-14-428-5588
Equipe Bouchon

144285588
A15067-3: RNCC: 3 | RNVC: 2

8 Dec 1988

4730-14-251-7788
Sediment Strainer Element

142517788
62413: RNCC: 3 | RNVC: 2
62413: RNCC: 5 | RNVC: 2
62413: RNCC: 5 | RNVC: 9
62413: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-438-5184
Flange To Tube Elbow

144385184
DA2C551143511: RNCC: 3 | RNVC: 2

21 Mar 1990

4730-14-548-0223
Hydraulic System Accessories Manifold

145480223
089211S: RNCC: 3 | RNVC: 2

6 Dec 2005

4730-14-484-2248
Quick Disconnect Plug

144842248
9016CPV5071404: RNCC: 3 | RNVC: 2

31 Oct 1996

4730-14-533-4829
Tube To Boss Straight Adapter

145334829
A681G2108: RNCC: 3 | RNVC: 2

5 Feb 2003

4730-14-512-8113
Tube Coupling

145128113
194814: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-420-0893
Tube Coupling

144200893
119153: RNCC: 3 | RNVC: 2

18 Nov 1987

4730-14-506-3047
Straight Tubing Connector

145063047
38660077: RNCC: 3 | RNVC: 2
38660077: RNCC: 5 | RNVC: 9

22 Apr 1998

4730-14-270-2474
Fluid Pressure Line Multiple Connector

142702474
0000300290: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-243-9577
Sediment Strainer Element

142439577
631660: RNCC: 3 | RNVC: 2
631660: RNCC: 5 | RNVC: 2
631660: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-353-0228
Bulkhead Hose Connector

143530228
A11A231352003: RNCC: 3 | RNVC: 2

14 Nov 1978

4730-14-414-5213
Flange To Hose Straight Adapter

144145213
BN324575F4DN40: RNCC: 3 | RNVC: 2

9 Feb 1987

4730-14-436-7071
Bulkhead Hose Connector

144367071
DA2C203525920: RNCC: 3 | RNVC: 2

3 Jan 1990

4730-14-326-1890

4730-14-525-7917
Tube To Boss Straight Adapter

145257917
F145330: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-302-8268
Tube Coupling

143028268
3751P8A: RNCC: 3 | RNVC: 2
3751P8A: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-268-7226
Fluid Passage Bolt

142687226
RA13204: RNCC: 3 | RNVC: 2
R13204: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-394-9423
Tube To Boss Straight Adapter

143949423
20320513: RNCC: 3 | RNVC: 2
20320513: RNCC: 5 | RNVC: 9

2 Oct 1984

4730-14-457-5466
Hose To Boss Straight Adapter

144575466
38353: RNCC: 3 | RNVC: 2

10 Sep 1992

4730-14-554-1152
Tube Tee

145541152
352 123: RNCC: 3 | RNVC: 2

12 Jun 2007

4730-14-292-8718
Sediment Strainer Element

142928718
30097: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-458-0062
Bulkhead Hose Connector

144580062
333866: RNCC: 3 | RNVC: 2
333866: RNCC: 5 | RNVC: 9

2 Oct 1992

4730-14-257-0605
Fluid Pressure Line Multiple Connector

142570605
A30757: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-325-6761
Bulkhead Hose Connector

143256761
0000362030: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-287-7910
Pipe Flange

142877910
RUAN7625M913P16D: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-528-5466
Tube To Boss Straight Adapter

145285466
F870XS10M14: RNCC: 3 | RNVC: 2
900552: RNCC: 3 | RNVC: 2

30 Jan 2002

4730-14-371-0514
Tube Tee

143710514
4730AJ4.1DN20EQUIPE: RNCC: 2 | RNVC: 2
8404200066: RNCC: 3 | RNVC: 2

5 Jun 1981

4730-14-442-7429
Flange To Tube Elbow

144427429
0000371520: RNCC: 3 | RNVC: 2

30 Oct 1990

4730-14-375-2243
Pipe Flange

143752243
5000049473: RNCC: 3 | RNVC: 2
5000049473: RNCC: 5 | RNVC: 9

26 Feb 1982

4730-14-413-6245
Tube Fitting Brazing Ferrule

144136245
0153804: RNCC: 3 | RNVC: 2
15-36-3804: RNCC: 3 | RNVC: 9

6 Jan 1987

4730-14-400-7622
Support De Banjo

144007622
201391-0: RNCC: 3 | RNVC: 2

21 May 1985

4730-14-364-0813

4730-14-359-5887
Tube To Boss Straight Adapter

143595887
221755: RNCC: 3 | RNVC: 2

15 Oct 1979

4730-14-439-5323
Fluid Pressure Line Multiple Connector

144395323
038419X: RNCC: 3 | RNVC: 2

14 May 1990

4730-14-409-9863
Pipe Flange

144099863
T4730BK38: RNCC: 3 | RNVC: 9

4 Jun 1986

4730-14-542-2408
Fluid Passage Bolt

145422408
921374508: RNCC: 3 | RNVC: 2
921374508: RNCC: 5 | RNVC: 9

8 Jul 2004

4730-14-524-2445
Fluid Passage Bolt

145242445
GF01186: RNCC: 3 | RNVC: 2
GF01186: RNCC: 5 | RNVC: 9

7 Mar 2001

4730-14-209-3079
Tube Fitting Brazing Ferrule

142093079
167463: RNCC: 3 | RNVC: 2
167463: RNCC: 5 | RNVC: 2
167463: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-442-2843
Self-Sealing Coupling Assembly

144422843
5621-6-6: RNCC: 3 | RNVC: 2

8 Oct 1990

4730-14-406-0849
Sediment Strainer Body

144060849
50971004: RNCC: 3 | RNVC: 2
426965: RNCC: 5 | RNVC: 2

8 Jan 1986

4730-14-234-4812

4730-14-255-7066

4730-14-549-8732
Tube Tee

145498732
MB5916F00DC: RNCC: 3 | RNVC: 2

17 May 2006

4730-14-528-3240
Flexible Tube Coupling Assembly

145283240
ES06A10MZ16A: RNCC: 3 | RNVC: 2

22 Jan 2002

4730-14-263-1960

4730-14-259-0103

4730-14-420-3795
Plaque Pour Tubes

144203795
H1121SP2REP1-6: RNCC: 3 | RNVC: 2

8 Dec 1987

4730-14-239-9677
Bouchon Special

142399677
2-04612: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-516-9847
Tube To Boss Straight Adapter

145169847
B001B147: RNCC: 3 | RNVC: 2

28 Oct 1999

4730-14-527-4046
Tube To Boss Straight Adapter

145274046
H77756: RNCC: 3 | RNVC: 2

24 Oct 2001

4730-14-489-1733
Pipe Coupling Leak Repair Clamp

144891733
10421: RNCC: 3 | RNVC: 2

2 Jul 1997

4730-14-432-3042
Pipe Coupling Leak Repair Clamp

144323042
X555198: RNCC: 3 | RNVC: 2

2 Jun 1989

4730-14-432-2794
Tube To Boss Straight Adapter

144322794
P4 12 08 14X150NU: RNCC: 3 | RNVC: 2
P4-12-8-14X150NU: RNCC: 5 | RNVC: 2

31 May 1989

4730-14-312-5289
Tube To Boss Straight Adapter

143125289
502-300-027-0: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-557-0902
Special Nipple

145570902
TEGUFLEX P U JAUNE DN40-PN10: RNCC: 3 | RNVC: 2
FS0006501: RNCC: 6 | RNVC: 9

7 May 2008

4730-14-561-1226
Hose Clamp

145611226
ABS0901-070: RNCC: 1 | RNVC: 2
901070: RNCC: 3 | RNVC: 2
ABS0901-070: RNCC: 5 | RNVC: 2
ABS0901-070: RNCC: 5 | RNVC: 2
ABS0901-070: RNCC: 5 | RNVC: 2
ABS0901-070: RNCC: 5 | RNVC: 9

17 Jun 2009

4730-14-568-9695
Adapter Bushing

145689695
MLS15: RNCC: 3 | RNVC: 2

25 Jul 2011

4730-14-562-1938
Hose Tee

145621938
3104 08 10: RNCC: 3 | RNVC: 2
FS0002475: RNCC: 6 | RNVC: 9

6 Oct 2009

4730-14-247-9529

4730-14-278-8146

4730-14-350-9189

4730-14-557-1835
Pipe To Hose Straight Adapter

145571835
MAT769-3000-F2: RNCC: 3 | RNVC: 2

23 May 2008

4730-14-351-8100

4730-14-202-9137

4730-14-366-2057

4730-14-395-0423
Fluid Pressure Line Multiple Connector

143950423
0000302370: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-371-0483
Tube To Boss Straight Adapter

143710483
8901107466: RNCC: 3 | RNVC: 2

5 Jun 1981

4730-14-415-1427
Tube To Boss Straight Adapter

144151427
84052535: RNCC: 3 | RNVC: 2

16 Apr 1987

4730-14-441-1302
Fluid Pressure Line Multiple Connector

144411302
91713043: RNCC: 1 | RNVC: 2
BJIIS06: RNCC: 3 | RNVC: 9

22 Aug 1990

4730-14-424-9711
Tube Coupling

144249711
SKA12: RNCC: 3 | RNVC: 2
SKA12: RNCC: 3 | RNVC: 9

16 Jun 1988

4730-14-535-1424
Tube To Boss Straight Adapter

145351424
104101182: RNCC: 3 | RNVC: 2
5005030273: RNCC: 5 | RNVC: 2

14 May 2003

4730-14-452-7510
Tube Tee

144527510
6214042: RNCC: 3 | RNVC: 2
LW300GP12N: RNCC: 5 | RNVC: 2
91630578: RNCC: 5 | RNVC: 2

15 Jan 1992

4730-14-531-9223
Fluid Pressure Line Multiple Connector

145319223
45124284: RNCC: 3 | RNVC: 2

25 Sep 2002

4730-14-550-6852
Fluid Pressure Line Multiple Connector

145506852
RA1B726220: RNCC: 3 | RNVC: 2

6 Jul 2006

4730-14-450-0494
Sediment Strainer Element

144500494
01000815A08080: RNCC: 3 | RNVC: 2
01000815A08080: RNCC: 3 | RNVC: 9

18 Sep 1991

4730-14-347-0893
Tube To Boss Straight Adapter

143470893
5221: RNCC: 3 | RNVC: 2

19 Jan 1978

4730-14-375-5226
Tube To Boss Straight Adapter

143755226
F6XS12 1-4: RNCC: 3 | RNVC: 2
F6XS12-1-4: RNCC: 5 | RNVC: 9

26 Feb 1982

4730-14-484-1457
Tube Union

144841457
191057-2: RNCC: 3 | RNVC: 2
191057-2: RNCC: 5 | RNVC: 2

29 Oct 1996

4730-14-369-4397
Quick Disconnect Coupling Half

143694397
M0F10M18X1-5: RNCC: 3 | RNVC: 2

17 Apr 1981

4730-14-561-9910
Fluid Pressure Line Multiple Connector

145619910
1528-1/2GAZ: RNCC: 3 | RNVC: 2
FS0004185: RNCC: 6 | RNVC: 9

22 Sep 2009

4730-14-302-2995
Tube To Boss Straight Adapter

143022995
000536282P: RNCC: 3 | RNVC: 2
0UT1-107: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-220-6286
Fluid Pressure Line Multiple Connector

142206286
3098NN: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-387-6614
Fluid Passage Bolt

143876614
16762198: RNCC: 3 | RNVC: 2
16762198: RNCC: 5 | RNVC: 9

12 Oct 1983

4730-14-374-7777
Bulkhead Hose Connector

143747777
0000364770: RNCC: 3 | RNVC: 2

30 Jan 1982

4730-14-447-4927
Quick Disconnect Coupling Half

144474927
2690418: RNCC: 3 | RNVC: 2

27 May 1991

4730-14-376-4708
Support Racc Vidang

143764708
16559496: RNCC: 3 | RNVC: 2
16559496: RNCC: 5 | RNVC: 9

28 Apr 1982

4730-14-302-9893

4730-14-032-1549
Contre Bride

140321549
CMT30E9030AF3DE88-9REP4: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-269-1898
Pipe Flange

142691898
7066CD1F101-6: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-306-7685
Bride A Zinc

143067685
000MA0781F5REP1DN40: RNCC: 3 | RNVC: 2
000MA781F5REP1DN40: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-563-1482
Tube-Hose Fitting Compression Sleeve

145631482
8 RB 1/2 GCYL: RNCC: 3 | RNVC: 2

7 Jan 2010

4730-14-537-9162
Tube Coupling

145379162
175-529-61/CCTP NR20/01/SDT/DEE: RNCC: 3 | RNVC: 2

3 Dec 2003

4730-14-404-3004
Tube Coupling

144043004
R183020-06: RNCC: 3 | RNVC: 2
RPI20-06: RNCC: 5 | RNVC: 2

23 Sep 1985

4730-14-344-7102
Tube To Boss Straight Adapter

143447102
EA1M718-10-04: RNCC: 3 | RNVC: 2

9 Sep 1977

4730-14-294-3891
Bulkhead Hose Connector

142943891
121A77-100-71-0: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-440-6189
Tube Coupling

144406189
TBI15-20: RNCC: 3 | RNVC: 9
91484001: RNCC: 5 | RNVC: 2

18 Jul 1990

4730-14-342-1681
Tube To Boss Straight Adapter

143421681
3210-94-33-112: RNCC: 3 | RNVC: 2
85-688-7352: RNCC: 6 | RNVC: 9

14 Apr 1977

4730-14-221-9722

4730-14-222-2725

4730-14-343-7656
Fluid Pressure Line Multiple Connector

143437656
F726-003: RNCC: 3 | RNVC: 2

13 Jul 1977

4730-14-249-8454
Tube To Boss Straight Adapter

142498454
UMCAG17X15-21: RNCC: 3 | RNVC: 2
FTLIU17X15-21C0: RNCC: 5 | RNVC: 2
UMCAG17X15-21NU: RNCC: 5 | RNVC: 2
0024246085: RNCC: 5 | RNVC: 2
0024246085: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-429-5381
Tube To Boss Straight Adapter

144295381
UMCK14X12-17N: RNCC: 3 | RNVC: 2

30 Jan 1989

4730-14-349-3607
Tube To Boss Straight Adapter

143493607
31750810: RNCC: 3 | RNVC: 2
M3265-0818: RNCC: 5 | RNVC: 2
91467107: RNCC: 5 | RNVC: 2
911001: RNCC: 5 | RNVC: 2
222-9152: RNCC: 5 | RNVC: 2

22 May 1978

4730-14-423-4174
Pipe Flange

144234174
UA50088006PN50-11D1DN300: RNCC: 2 | RNVC: 2
4730HCPN50DN30011D1: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-384-4728
Sediment Strainer Element

143844728
027.101.002: RNCC: 3 | RNVC: 2
27-101-002: RNCC: 5 | RNVC: 9

4 May 1983

4730-14-536-1098
Tube To Hose Straight Adapter

145361098
4750-708-04: RNCC: 3 | RNVC: 2

9 Jul 2003

4730-14-553-1295
Quick Disconnect Coupling Half

145531295
SPX12-7616JV: RNCC: 3 | RNVC: 2
436375: RNCC: 5 | RNVC: 2

5 Mar 2007

4730-14-423-4623
Pipe Flange

144234623
UA50088006PN420-11B2SDN32: RNCC: 2 | RNVC: 2
4730HCPN420DN03211B2S: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-362-0866
Mamelon Court

143620866
721-900-346: RNCC: 3 | RNVC: 2
285-6574: RNCC: 5 | RNVC: 2
721-900-346: RNCC: 5 | RNVC: 2

20 Feb 1980

4730-14-395-3190
Expanding Tube Repair Plug

143953190
GSM084-005F7: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-542-0552
Tube To Boss Straight Adapter

145420552
25242032-060: RNCC: 3 | RNVC: 2
502114007013A: RNCC: 3 | RNVC: 9

2 Jul 2004

4730-14-524-1287
Tube To Boss Straight Adapter

145241287
8LST104B071: RNCC: 3 | RNVC: 2
A1215627: RNCC: 3 | RNVC: 2

5 Mar 2001

4730-14-438-5185
Flange To Tube Elbow

144385185
DA2C551143511A1: RNCC: 3 | RNVC: 2

21 Mar 1990

4730-14-293-3252
Pipe Flange

142933252
0235227750: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-436-5643
Bulkhead Hose Connector

144365643
DA2C205513711U2: RNCC: 3 | RNVC: 2

3 Jan 1990

4730-14-525-2268
Tube To Boss Straight Adapter

145252268
06470P076074: RNCC: 3 | RNVC: 2
50314001: RNCC: 3 | RNVC: 2

23 May 2001

4730-14-549-4653
Tube Tee

145494653
0235700010: RNCC: 3 | RNVC: 2

6 Apr 2006

4730-14-556-0308
Fluid Flow Restrictor Unit

145560308
067G2002: RNCC: 3 | RNVC: 2

22 Jan 2008

4730-14-206-2809
Fluid Passage Bolt

142062809
17-7-671: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-323-9223
Pipe Flange

143239223
7062TD1F1M216UE12: RNCC: 2 | RNVC: 2

1 Jan 1975

4730-14-385-7087
Tube To Boss Straight Adapter

143857087
246E3-4: RNCC: 3 | RNVC: 9

26 Jul 1983

4730-14-547-4492
Tube To Boss Swivel Joint

145474492
5010527451: RNCC: 3 | RNVC: 2

13 Oct 2005

4730-14-323-3575
Thru-Hull Connector

143233575
701MA0007: RNCC: 3 | RNVC: 2
701MA007: RNCC: 5 | RNVC: 2

1 Jan 1975

Load More Results