What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 98 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 98 of 185

4730-14-292-7464

4730-14-322-6843

4730-14-214-5683
Fluid Pressure Line Multiple Connector

142145683
0000128540: RNCC: 3 | RNVC: 2
0000128540: RNCC: 5 | RNVC: 9
128540: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-319-8918
Fluid Passage Bolt

143198918
140M136: RNCC: 3 | RNVC: 9

1 Jan 1975

4730-14-375-2259
Tube Fitting Clinch Sleeve

143752259
TMB3-5: RNCC: 3 | RNVC: 2
0024255439: RNCC: 5 | RNVC: 2
0024255439: RNCC: 5 | RNVC: 9
24255439: RNCC: 5 | RNVC: 9

26 Feb 1982

4730-14-426-7846
Tube Tee

144267846
4730HEING088,9X16-60,3X8,8: RNCC: 2 | RNVC: 2

22 Sep 1988

4730-14-325-6817
Equ A Bride Raccord

143256817
0000367120: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-444-3641
Ventilation Tunnel

144443641
1600-101-240-02: RNCC: 3 | RNVC: 2

9 Jan 1991

4730-14-485-6068
Self-Sealing Coupling Half

144856068
5N16809: RNCC: 3 | RNVC: 2
5N16809: RNCC: 5 | RNVC: 2

4 Feb 1997

4730-14-434-9042
Fluid Passage Bolt

144349042
06-6441-D17: RNCC: 3 | RNVC: 2

9 Oct 1989

4730-14-514-7274
Pipeline Flexible Spacer

145147274
EVCYDEAC7S: RNCC: 3 | RNVC: 2

11 Jun 1999

4730-14-405-3304
Tube To Boss Straight Adapter

144053304
202819: RNCC: 3 | RNVC: 2

27 Nov 1985

4730-14-231-6257
Tube Union

142316257
EN10242-U11-1-ZN-A: RNCC: 2 | RNVC: 2
770340206: RNCC: 3 | RNVC: 2
340-1Z: RNCC: 5 | RNVC: 2
770 340 206: RNCC: 5 | RNVC: 2
E29801U5FZ: RNCC: 5 | RNVC: 9
262-1Z: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-287-5144
Tube Union

142875144
EN10242-U11-2-ZN-A: RNCC: 2 | RNVC: 2
770340209: RNCC: 3 | RNVC: 2
770 340 209: RNCC: 5 | RNVC: 2
340-2Z: RNCC: 5 | RNVC: 2
E29801U5JZ: RNCC: 5 | RNVC: 9
262-2Z: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-574-9435
Tube-Pipe Fitting Kit

145749435
KRCY 5 S/MMS: RNCC: 3 | RNVC: 2

4 Mar 2013

4730-14-263-6357
Tube Coupling

142636357
7062BD1RPE36A52-3: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-031-9331
Hose Coupling Assembly

140319331
1851-1-5000: RNCC: 3 | RNVC: 2
1851-1-5000: RNCC: 5 | RNVC: 9

5 Jul 1980

4730-14-556-4551
Pipe Flange

145564551
2A 2 E EF 558300 001 4/5 DN25: RNCC: 3 | RNVC: 2

10 Mar 2008

4730-14-322-1283
Sediment Strainer Element

143221283
121S71-131-43-0: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-421-0282
Tube-Hose Fitting Compression Sleeve

144210282
101232-1: RNCC: 3 | RNVC: 2

6 Jan 1988

4730-14-571-4222
Hose Tee

145714222
5005630076: RNCC: 1 | RNVC: 2
93401511: RNCC: 3 | RNVC: 2
20747962: RNCC: 5 | RNVC: 2

23 Mar 2012

4730-14-538-3256
Return Tube Bend

145383256
NGM0010035824743: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-553-9013
Tube Tee

145539013
354 232: RNCC: 3 | RNVC: 2
354 232: RNCC: 3 | RNVC: 2

29 May 2007

4730-14-541-3478
Branched Tubing Connector

145413478
6541056: RNCC: 3 | RNVC: 2
6541056: RNCC: 5 | RNVC: 2
6541056: RNCC: 5 | RNVC: 2

29 May 2004

4730-14-262-9580
Pipe Flange

142629580
DLT005557: RNCC: 3 | RNVC: 2
DLT005557: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-382-8730
Tube To Boss Straight Adapter

143828730
PE60844H05: RNCC: 3 | RNVC: 2

26 Jul 2000

4730-14-204-3667
Raccord Intermediai

142043667
0202000650: RNCC: 3 | RNVC: 2
202-00-065: RNCC: 5 | RNVC: 2

1 Jan 1963

4730-14-329-9274
Tube Tee

143299274
NO PRIMARY REF14-329-9274: RNCC: 3 | RNVC: 2
225: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-575-6555
Tube Tee

145756555
TE-Q00005-00: RNCC: 3 | RNVC: 2

22 Apr 2013

4730-14-316-7097
Tube To Boss Straight Adapter

143167097
A70-73931: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-265-8469
Raccord De Sortie

142658469
206027: RNCC: 3 | RNVC: 2
67-393-101-24: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-351-6623
Tube To Boss Straight Adapter

143516623
BN347-511F4: RNCC: 3 | RNVC: 2

12 Sep 1978

4730-14-515-2675
Tube Tee

145152675
9721000558: RNCC: 3 | RNVC: 2

13 Jul 1999

4730-14-323-9204
Pipe Flange

143239204
7062TC1F1F66UE12: RNCC: 2 | RNVC: 2

1 Jan 1975

4730-14-563-7638
Tube Elbow

145637638
WE08LRCFX: RNCC: 3 | RNVC: 2
A231004000439: RNCC: 5 | RNVC: 2

11 Mar 2010

4730-14-273-5339
Pipe Flange

142735339
7062TC1F1M48UA9NFEM: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-564-7808
Tube Elbow

145647808
SM212NA: RNCC: 3 | RNVC: 2

4 Jun 2010

4730-14-202-5274
Tube Tee

142025274
R8X12X12: RNCC: 3 | RNVC: 2
R14077: RNCC: 5 | RNVC: 2

1 Jan 1963

4730-14-232-9687
Tube To Boss Straight Adapter

142329687
0134720050: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-523-1531
Tube Coupling

145231531
AA059: RNCC: 3 | RNVC: 2

10 Jan 2001

4730-14-397-7205
Tube Coupling

143977205
MX79REP4DN80: RNCC: 3 | RNVC: 2

14 Dec 1984

4730-14-448-3198
Lubrication Fitting

144483198
1353006-75959: RNCC: 3 | RNVC: 2

24 Jun 1991

4730-14-428-1330
Tube To Boss Straight Adapter

144281330
PE40201K10: RNCC: 3 | RNVC: 2

1 Dec 1988

4730-14-550-8863
Tube To Boss Straight Adapter

145508863
934000703: RNCC: 3 | RNVC: 2
5005630141: RNCC: 5 | RNVC: 2

26 Jul 2006

4730-14-525-7234
Tube Coupling

145257234
20 244 160 4150: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-465-6623
Fluid Flow Restrictor

144656623
EBA82260: RNCC: 3 | RNVC: 2

6 Oct 1993

4730-14-543-4813
Tube To Boss Straight Adapter

145434813
103043009006A: RNCC: 3 | RNVC: 9

9 Nov 2004

4730-14-351-1163
Tube Tee

143511163
CK5: RNCC: 3 | RNVC: 2

10 Aug 1978

4730-14-270-1839
Fluid Pressure Line Multiple Connector

142701839
0176-525028: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-503-1787
Bulkhead Hose Connector

145031787
RA1M537304150: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-484-8008
Quick Disconnect Coupling Half

144848008
96182767: RNCC: 3 | RNVC: 2
96182767: RNCC: 5 | RNVC: 2

5 Dec 1996

4730-14-232-1740
Tube-Hose Fitting Compression Sleeve

142321740
E29601F20D: RNCC: 2 | RNVC: 2
0000118124: RNCC: 5 | RNVC: 2
E29601F20XD: RNCC: 5 | RNVC: 2
0000118124: RNCC: 5 | RNVC: 9
118124: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-308-8832
Sediment Strainer Element

143088832
033754: RNCC: 3 | RNVC: 2
56391002: RNCC: 3 | RNVC: 2
33754: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-515-0670
Tube To Boss Straight Adapter

145150670
322062: RNCC: 3 | RNVC: 2

30 Jun 1999

4730-14-226-1649
Fluid Pressure Line Multiple Connector

142261649
LB50219: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-255-0399

4730-14-453-9778
Tube Coupling

144539778
LN329-017REP132: RNCC: 3 | RNVC: 2
LN329-017F20DE17,2: RNCC: 5 | RNVC: 2

19 Mar 1992

4730-14-423-4591
Pipe Flange

144234591
UA50088006PN150-11D1SDN100: RNCC: 2 | RNVC: 2
4730HCPN150DN10011D1S: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-307-5177
Hose Coupling Assembly

143075177
9943203A: RNCC: 3 | RNVC: 2
9943203: RNCC: 3 | RNVC: 9
9-94-32-03: RNCC: 5 | RNVC: 9
9-94-32-03A: RNCC: 5 | RNVC: 9
TAH1176-5: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-213-8585
Fluid Passage Bolt

142138585
3100-148: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-360-7922
Tube-Hose Fitting Compression Sleeve

143607922
105-6: RNCC: 3 | RNVC: 2
1A14L: RNCC: 3 | RNVC: 2
101100014: RNCC: 5 | RNVC: 2
0024387003: RNCC: 5 | RNVC: 2
5516024146: RNCC: 5 | RNVC: 2
0024387003: RNCC: 5 | RNVC: 9
5516024146: RNCC: 5 | RNVC: 9

19 Dec 1979

4730-14-426-2978
Hose To Boss Straight Adapter

144262978
5172309300: RNCC: 3 | RNVC: 2

18 Aug 1988

4730-14-527-3776
Tube Tee

145273776
H131773: RNCC: 3 | RNVC: 2

24 Oct 2001

4730-14-344-6329
Fluid Pressure Line Multiple Connector

143446329
205571: RNCC: 3 | RNVC: 2
BFCSAMM205571: RNCC: 5 | RNVC: 2

9 Sep 1977

4730-14-365-3095

4730-14-304-6499

4730-14-365-6996
Quick Disconnect Coupling Half

143656996
1121440000: RNCC: 3 | RNVC: 2
0024322049: RNCC: 5 | RNVC: 2
902008: RNCC: 5 | RNVC: 2
DAH1121440000: RNCC: 5 | RNVC: 9
0024322049: RNCC: 5 | RNVC: 9
24322049: RNCC: 5 | RNVC: 9

8 Oct 1980

4730-14-392-7668
Tube To Boss Straight Adapter

143927668
235344: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-511-0892
Tube Tee

145110892
E29591JB16AE: RNCC: 2 | RNVC: 2

2 Dec 1998

4730-14-382-8721
Tube To Boss Straight Adapter

143828721
PE60801H16: RNCC: 3 | RNVC: 2

26 Jul 2000

4730-14-418-2177
Flange To Tube Elbow

144182177
0000370790: RNCC: 3 | RNVC: 2

6 Aug 1987

4730-14-539-4053
Quick Disconnect Coupling Half

145394053
N00221878: RNCC: 3 | RNVC: 2

14 Jan 2004

4730-14-406-1125
Tube To Boss Straight Adapter

144061125
58185: RNCC: 3 | RNVC: 2

8 Jan 1986

4730-14-429-2163
Fluid Pressure Line Multiple Connector

144292163
6T06SMK01: RNCC: 3 | RNVC: 2

11 Jan 1989

4730-14-399-3355
Tube Coupling

143993355
RAC538060001: RNCC: 3 | RNVC: 2

6 Mar 1985

4730-14-387-3132
Tube To Boss Straight Adapter

143873132
84011413: RNCC: 3 | RNVC: 2

15 Sep 1983

4730-14-220-6162
Tube Tee

142206162
R10X16X16: RNCC: 3 | RNVC: 2
R14101: RNCC: 5 | RNVC: 2

1 Jan 1965

4730-14-282-4001
Pipe Flange

142824001
RUHF30G4: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-541-0058
Tube To Boss Straight Adapter

145410058
6501BRT114002: RNCC: 3 | RNVC: 2

5 May 2004

4730-14-220-6113
Tube Tee

142206113
R6510: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-273-5262

4730-14-279-0545

4730-14-571-2986
Tube-Pipe Fitting Kit

145712986
BB-8846015: RNCC: 3 | RNVC: 2

12 Mar 2012

4730-14-438-0546
Fluid Passage Bolt

144380546
027012: RNCC: 3 | RNVC: 2
010926: RNCC: 5 | RNVC: 9

7 Mar 1990

4730-14-445-2416
Hose To Boss Straight Adapter

144452416
553982: RNCC: 3 | RNVC: 2
553982: RNCC: 5 | RNVC: 9

6 Feb 1991

4730-14-499-3352
Hose To Boss Straight Adapter

144993352
5000823216: RNCC: 3 | RNVC: 2
Y00005756: RNCC: 5 | RNVC: 2
63AM13: RNCC: 5 | RNVC: 2

29 Oct 1997

4730-14-434-3059
Hydraulic Manifold Assembly

144343059
553431: RNCC: 3 | RNVC: 2

20 Sep 1989

4730-14-347-6601
Bulkhead Hose Connector

143476601
79063391: RNCC: 3 | RNVC: 2
79063391: RNCC: 5 | RNVC: 9

1 Mar 1978

4730-14-476-0432
Fluid Passage Bolt

144760432
5000820414: RNCC: 3 | RNVC: 2

17 May 1995

4730-14-300-6457
Tube To Boss Straight Adapter

143006457
83965DET25: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-250-4147
Swivel Retaining Pipe Flange

142504147
112806: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-553-9743
Non-Metallic Connecting Sleeve

145539743
25363428: RNCC: 3 | RNVC: 2

5 Jun 2007

4730-14-505-7332
Lubrication Fitting

145057332
7031010: RNCC: 3 | RNVC: 2
ALG7031010: RNCC: 5 | RNVC: 9

26 Mar 1998

4730-14-436-0897
Tube Coupling

144360897
H80558: RNCC: 3 | RNVC: 2

5 Dec 1989

4730-14-369-6350
Fluid Passage Bolt

143696350
207580: RNCC: 3 | RNVC: 2

17 Apr 1981

4730-14-533-9603
Tube To Boss Straight Adapter

145339603
7891.13.10: RNCC: 3 | RNVC: 2
EN098496: RNCC: 6 | RNVC: 9

5 Mar 2003

4730-14-388-7517
Bulkhead Hose Connector

143887517
0000241060: RNCC: 3 | RNVC: 2

3 Nov 1983

4730-14-554-0997
Pipe Flange

145540997
604 117: RNCC: 3 | RNVC: 2
604 117: RNCC: 3 | RNVC: 2

11 Jun 2007

4730-14-535-3655
Tube To Boss Straight Adapter

145353655
93406201: RNCC: 3 | RNVC: 2
5005630157: RNCC: 5 | RNVC: 2

22 May 2003

4730-14-376-4378
Tube To Boss Straight Adapter

143764378
0000451077: RNCC: 3 | RNVC: 2
451077: RNCC: 5 | RNVC: 9

30 Mar 1982

4730-14-509-6753
Bulkhead Hose Connector

145096753
RA1M534304130: RNCC: 3 | RNVC: 2

28 Oct 1998

4730-14-542-9321
Pipeline Flexible Spacer

145429321
2000273: RNCC: 3 | RNVC: 2
2000273: RNCC: 5 | RNVC: 2

14 Aug 2004

4730-14-324-3024

4730-14-434-3070
Fluid Pressure Line Multiple Connector

144343070
553145: RNCC: 3 | RNVC: 2

20 Sep 1989

4730-14-340-9242
Fluid Passage Bolt

143409242
9777060034: RNCC: 3 | RNVC: 2

14 Feb 1977

4730-14-491-8639
Tube To Boss Straight Adapter

144918639
423441: RNCC: 3 | RNVC: 2
F300 0T 005 7572: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-238-3950
Fluid Pressure Line Multiple Connector

142383950
30517: RNCC: 3 | RNVC: 2
LB30517: RNCC: 5 | RNVC: 2
29766: RNCC: 5 | RNVC: 2
30017: RNCC: 5 | RNVC: 2
30517: RNCC: 5 | RNVC: 2
906191: RNCC: 5 | RNVC: 2
215932: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-452-6582
Tube Tee

144526582
GA70671: RNCC: 3 | RNVC: 2

15 Jan 1992

4730-14-525-1920
Tube To Boss Straight Adapter

145251920
2413371233: RNCC: 3 | RNVC: 2
06310P122105: RNCC: 3 | RNVC: 2

23 May 2001

4730-14-568-8091
Sediment Strainer

145688091
MF94504A1616QJE: RNCC: 3 | RNVC: 2

6 Jul 2011

4730-14-419-0416
Tube Coupling

144190416
GM10006-20: RNCC: 3 | RNVC: 2

30 Sep 1987

4730-14-383-8685
Bulkhead Hose Connector

143838685
64353280001BREPAAH-F15A23-23DN50: RNCC: 3 | RNVC: 2

11 Apr 1983

4730-14-358-1951
Fluid Passage Bolt

143581951
0000139931: RNCC: 3 | RNVC: 2
0000139931: RNCC: 5 | RNVC: 9
139931: RNCC: 5 | RNVC: 9

13 Aug 1979

4730-14-380-9961
Hose Coupling Assembly

143809961
300148: RNCC: 3 | RNVC: 9

14 Dec 1982

4730-14-285-3826
Tube To Boss Straight Adapter

142853826
A69645: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-489-5315
Tube Coupling

144895315
16846139: RNCC: 3 | RNVC: 2

30 Jul 1997

4730-14-576-0035
Hose Nipple

145760035
XAGV 16 S ZN FER NOIR: RNCC: 3 | RNVC: 2
4130.701: RNCC: 5 | RNVC: 2
109794C: RNCC: 5 | RNVC: 2
Y00014161: RNCC: 5 | RNVC: 2

22 May 2013

4730-14-576-0615
Exhaust-Intake Pneumatic Muffler

145760615
6.05.18: RNCC: 3 | RNVC: 2
A05100209: RNCC: 5 | RNVC: 2

28 May 2013

4730-14-228-0841
Tube Fitting Brazing Ferrule

142280841
9773104032: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-043-0932
Tube To Boss Straight Adapter

140430932
17250DEA: RNCC: 3 | RNVC: 2

10 Apr 1984

4730-14-533-4830
Tube To Boss Straight Adapter

145334830
A681G2712: RNCC: 3 | RNVC: 2

5 Feb 2003

4730-14-553-7759
Tube To Boss Straight Adapter

145537759
107 073: RNCC: 3 | RNVC: 2
107 073: RNCC: 3 | RNVC: 2

22 May 2007

4730-14-545-3249
Fluid Flow Restrictor Unit

145453249
15571REP10: RNCC: 3 | RNVC: 2

5 Apr 2005

4730-14-461-9224
Bulkhead Hose Connector

144619224
T700A3240030100: RNCC: 3 | RNVC: 2

31 Mar 1993

4730-14-505-0570
Quick Disconnect Wye

145050570
3440A0600: RNCC: 3 | RNVC: 2
5005330278: RNCC: 5 | RNVC: 2

11 Mar 1998

4730-14-462-7115
Fluid Flow Restrictor

144627115
SBE1091: RNCC: 3 | RNVC: 2

28 Apr 1993

4730-14-387-0829
Pipeline Flexible Spacer

143870829
DILAT0FLEXNT200HHMN7068: RNCC: 3 | RNVC: 9

24 Aug 1983

4730-14-379-8048
Tube To Boss Straight Adapter

143798048
064E04-568293D: RNCC: 3 | RNVC: 2

20 Oct 1982

4730-14-376-7623
Tube To Boss Straight Adapter

143767623
1110080027: RNCC: 3 | RNVC: 2

28 Apr 1982

4730-14-485-2485
Pipe Flange

144852485
PL1NA003AA012618: RNCC: 3 | RNVC: 2

14 Jan 1997

4730-14-498-7032
Tube Tee

144987032
31A6NU: RNCC: 3 | RNVC: 2
231100006NU: RNCC: 5 | RNVC: 2
82411200: RNCC: 5 | RNVC: 2
AX82411200: RNCC: 5 | RNVC: 2
5005030461: RNCC: 5 | RNVC: 2
F300 0T 008 0438: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-514-0633
Bulkhead Hose Connector

145140633
RA1B522004161B1: RNCC: 3 | RNVC: 2

22 Apr 1999

4730-14-200-2032
Self-Sealing Coupling Assembly

142002032
43945: RNCC: 3 | RNVC: 2

1 Jan 1962

4730-14-312-1105
Pipe Flange

143121105
188191: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-527-3842
Tube To Boss Straight Adapter

145273842
H145314: RNCC: 3 | RNVC: 2

24 Oct 2001

4730-14-338-0799

4730-14-263-6408

4730-14-346-0977
Tube To Boss Straight Adapter

143460977
13-40-40-49: RNCC: 3 | RNVC: 2
UFA40X40-49N: RNCC: 3 | RNVC: 2
6A40-40-49: RNCC: 3 | RNVC: 2
VFA40-40-49: RNCC: 5 | RNVC: 9

12 Dec 1977

4730-14-305-6252
Tube To Boss Straight Adapter

143056252
9105424347: RNCC: 3 | RNVC: 2
I2-42-33-42BR: RNCC: 5 | RNVC: 9
I2-42-33X42BRHP: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-545-4163
Tube To Boss Straight Adapter

145454163
SMK15G1/4PC: RNCC: 3 | RNVC: 2

12 Apr 2005

4730-14-371-0557
Tube Fitting Clinch Sleeve

143710557
4730AJ4.6DN14: RNCC: 2 | RNVC: 2
6016145849: RNCC: 3 | RNVC: 2
LL001-CK14S: RNCC: 5 | RNVC: 2
8424140066: RNCC: 5 | RNVC: 2

5 Jun 1981

4730-14-465-7408
Tube To Boss Straight Adapter

144657408
MAT145-01-01: RNCC: 3 | RNVC: 2

14 Oct 1993

4730-14-495-3787
Tube To Boss Straight Adapter

144953787
F51377-22: RNCC: 3 | RNVC: 2
F5137722: RNCC: 5 | RNVC: 2
F300 0T 023 1839: RNCC: 6 | RNVC: 9
F300 0T 019 1685: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-339-9701
Tube Tee

143399701
GSM163-017F37: RNCC: 3 | RNVC: 2
GSM163-17F37: RNCC: 5 | RNVC: 2

18 Jan 1977

4730-14-554-4676
Flange To Pipe Elbow

145544676
18040816: RNCC: 3 | RNVC: 2
CAE02047: RNCC: 5 | RNVC: 2

11 Jul 2007

4730-14-326-9063

4730-14-567-3232
Flange To Tube Elbow

145673232
M4721350000000: RNCC: 3 | RNVC: 2

7 Mar 2011

4730-14-443-7410
Bulkhead Hose Connector

144437410
20295732: RNCC: 3 | RNVC: 2

5 Dec 1990

4730-14-311-1624
Tube To Boss Straight Adapter

143111624
2114023: RNCC: 3 | RNVC: 9
2114023: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-359-6083
Tu Droit Adaptateur

4730-14-344-5101

4730-14-576-0043
Hose Nipple

145760043
XBGSV 12 S AVEC GM ZN FER NOIR: RNCC: 3 | RNVC: 2
109790L: RNCC: 5 | RNVC: 2
4263.701: RNCC: 5 | RNVC: 2
Y00014164: RNCC: 5 | RNVC: 2

22 May 2013

4730-14-554-2166
Tube Coupling

145542166
195914: RNCC: 3 | RNVC: 2

13 Jun 2007

4730-14-505-4010
Fluid Pressure Line Multiple Connector

145054010
12023067: RNCC: 3 | RNVC: 2

18 Mar 1998

4730-14-229-1912
Fluid Passage Bolt

142291912
3100-75: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-406-7545
Tube Tee

144067545
T31: RNCC: 3 | RNVC: 2

8 Jan 1986

4730-14-355-4057
Bulkhead Hose Connector

143554057
LB337: RNCC: 3 | RNVC: 2
140A650: RNCC: 5 | RNVC: 2
140A650: RNCC: 5 | RNVC: 9

19 Mar 1979

4730-14-369-4402
Fluid Pressure Line Multiple Connector

143694402
ND10: RNCC: 3 | RNVC: 2

17 Apr 1981

4730-14-378-0534
Fluid Pressure Line Multiple Connector

143780534
215436: RNCC: 3 | RNVC: 2

20 Jul 1982

4730-14-525-7902
Tube To Boss Straight Adapter

145257902
F145308: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-505-6440
Tube Coupling

145056440
E25001000012: RNCC: 3 | RNVC: 2

26 Mar 1998

4730-14-345-0316
Pipe Flange

143450316
36173452: RNCC: 3 | RNVC: 2
36173451: RNCC: 5 | RNVC: 2

5 Oct 1977

4730-14-514-1115
Pipe Expansion Joint

145141115
14.09016.0R: RNCC: 3 | RNVC: 2
1409016OR: RNCC: 3 | RNVC: 2

26 Apr 1999

4730-14-438-5147
Hose Coupling Assembly

144385147
DA2C729001800: RNCC: 3 | RNVC: 2

21 Mar 1990

4730-14-230-5971
Tube Coupling Assembly

142305971
3711S20A: RNCC: 3 | RNVC: 2
3711S20A: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-272-4362
Fluid Passage Bolt

142724362
506089: RNCC: 3 | RNVC: 9

1 Jan 1971

4730-14-309-9213

4730-14-448-7431
Tube Fitting Socket Welded Ferrule

144487431
4730HP-2DE33,7: RNCC: 2 | RNVC: 2
Y07134-02-0000P002DE33,7: RNCC: 3 | RNVC: 2

9 Jul 1991

4730-14-208-8971
Mamelon Male

142088971
676-206-012-0: RNCC: 3 | RNVC: 2
9453-06012: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-251-9022
Tube To Boss Straight Adapter

142519022
M10V13: RNCC: 3 | RNVC: 2
12-10-8-13CYLNU: RNCC: 3 | RNVC: 2
UMA10X8-13NNU: RNCC: 3 | RNVC: 2
4A10-8-13CYLNU: RNCC: 3 | RNVC: 2
121512NU: RNCC: 5 | RNVC: 2

1 Jan 1968

4730-14-420-0717
Tube Coupling

144200717
NO PRIMARY REF14-420-0717: RNCC: 3 | RNVC: 2
89165023: RNCC: 5 | RNVC: 2
MI994: RNCC: 5 | RNVC: 9
T17REP103: RNCC: 5 | RNVC: 9

18 Nov 1987

4730-14-276-6394
Equerre Orientable

142766394
Q1-5509-14-18X150NN: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-293-6197
Fluid Passage Bolt

142936197
43312DE100A: RNCC: 2 | RNVC: 2
L43312-100DEA: RNCC: 5 | RNVC: 2
L44312-10DEA: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-218-3360
Tube To Boss Straight Adapter

142183360
12-16-20X150: RNCC: 3 | RNVC: 2
UMA16X20-150N: RNCC: 3 | RNVC: 2
4A16-20X150: RNCC: 3 | RNVC: 2
M16-20X1-5: RNCC: 3 | RNVC: 2
121014: RNCC: 5 | RNVC: 2
99-621-16-204-1: RNCC: 5 | RNVC: 2
12-16-20X150NN: RNCC: 5 | RNVC: 2
99621162041: RNCC: 5 | RNVC: 2

1 Jan 1965

4730-14-336-0257
Collier Raccord Tub

143360257
2757-45: RNCC: 3 | RNVC: 2

24 Jul 1976

4730-14-255-8022
Mamelon Double

142558022
0946677036: RNCC: 3 | RNVC: 2
0946677036: RNCC: 5 | RNVC: 9
946677036: RNCC: 5 | RNVC: 9

1 Jan 1969

4730-14-423-7587
Raccord Mamelon

144237587
83797: RNCC: 3 | RNVC: 2

28 Apr 1988

4730-14-414-4960
Tube To Boss Straight Adapter

144144960
8401631747NU: RNCC: 3 | RNVC: 2

4 Feb 1987

4730-14-521-2601
Quick Disconnect Coupling Half

145212601
IL0095038: RNCC: 3 | RNVC: 2
SYB0999: RNCC: 5 | RNVC: 2

13 Jul 2000

4730-14-311-8895
Fluid Pressure Line Multiple Connector

143118895
9776060234: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-477-7318
Fluid Passage Bolt

144777318
VC26X150: RNCC: 3 | RNVC: 2
699937059: RNCC: 5 | RNVC: 2
71704800: RNCC: 5 | RNVC: 2
5000286728: RNCC: 5 | RNVC: 2

20 Sep 1995

4730-14-479-7534
Tube Coupling

144797534
441526: RNCC: 3 | RNVC: 9
RAB8954: RNCC: 5 | RNVC: 2

5 Feb 1996

4730-14-511-9044
Tube To Boss Straight Adapter

145119044
5005030829: RNCC: 3 | RNVC: 2

28 Jan 1999

4730-14-322-2068
Tube To Boss Straight Adapter

143222068
A75197: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-494-9372
Tube To Boss Straight Adapter

144949372
5448556: RNCC: 3 | RNVC: 2
F300 0T 018 0932: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-357-2970
Tube To Boss Straight Adapter

143572970
X553508: RNCC: 3 | RNVC: 2

7 Jun 1979

4730-14-332-4851
Tube To Boss Straight Adapter

143324851
83604: RNCC: 3 | RNVC: 2
83604: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-538-5277
Pipe Flange

145385277
NGM0010060015018: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-346-7033

4730-14-296-5370

4730-14-262-9937
Manchon De Fixation

142629937
DLT007019: RNCC: 3 | RNVC: 2
DLT007019: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-502-4596
Hydraulic Manifold Assembly

145024596
TE00092876A0G: RNCC: 3 | RNVC: 2
COLLE94092A00: RNCC: 5 | RNVC: 9
COLLE94092X00: RNCC: 5 | RNVC: 9

17 Dec 1997

4730-14-274-5485

4730-14-276-4009

4730-14-567-3311
Flange To Tube Straight Adapter

145673311
M2821301700000: RNCC: 3 | RNVC: 2

7 Mar 2011

4730-14-214-1712

4730-14-308-7731

4730-14-211-3677
Bouchon Dorifice De

142113677
D2604-2-140: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-501-2361
Tube To Boss Straight Adapter

145012361
471-070: RNCC: 3 | RNVC: 2
471.070: RNCC: 3 | RNVC: 2
F300 0T 025 2766: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-427-9666
Embout

144279666
418-11385-000: RNCC: 3 | RNVC: 2

24 Nov 1988

4730-14-483-1627
Pipe Flange

144831627
330A62-0376-00: RNCC: 3 | RNVC: 2

21 Aug 1996

4730-14-429-2358
Tube Tee

144292358
2958-20L25L20S: RNCC: 3 | RNVC: 2

11 Jan 1989

4730-14-385-8904
Fluid Passage Bolt

143858904
5000280230: RNCC: 3 | RNVC: 2
5000280230: RNCC: 5 | RNVC: 9
12-183-1423: RNCC: 6 | RNVC: 9
5000280230: RNCC: 6 | RNVC: 9

24 Aug 1983

4730-14-389-4709
Fluid Pressure Line Multiple Connector

143894709
365A61-2514-03: RNCC: 3 | RNVC: 2

20 Dec 1983

4730-14-040-2958
Tube To Boss Straight Adapter

140402958
NO PRIMARY REF14-040-2958: RNCC: 3 | RNVC: 2
210952: RNCC: 5 | RNVC: 2
RT7555: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-213-5819
Tube Coupling

142135819
A1432: RNCC: 3 | RNVC: 2
3751S63A: RNCC: 3 | RNVC: 2
A1432: RNCC: 5 | RNVC: 2
3751K63A: RNCC: 5 | RNVC: 9
3751S63A: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-323-9215
Pipe Flange

143239215
7062TD1F1M133UE12: RNCC: 2 | RNVC: 2

1 Jan 1975

4730-14-382-9789
Tube To Boss Straight Adapter

143829789
219233: RNCC: 3 | RNVC: 2

17 Mar 1983

4730-14-505-3609
Bulkhead Hose Connector

145053609
WF88BFR12M16: RNCC: 3 | RNVC: 2

18 Mar 1998

4730-14-392-9750
Tube To Boss Straight Adapter

143929750
0000763995: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-517-9137
Tube To Boss Straight Adapter

145179137
206576: RNCC: 3 | RNVC: 2

17 Jan 2000

4730-14-234-3471
Tube To Boss Straight Adapter

142343471
3413457002: RNCC: 3 | RNVC: 2
0003012308: RNCC: 5 | RNVC: 2
0855332200: RNCC: 5 | RNVC: 2
0941620064: RNCC: 5 | RNVC: 2
941620064: RNCC: 5 | RNVC: 9
PRV9F1X: RNCC: 5 | RNVC: 9
0003012308: RNCC: 5 | RNVC: 9
0941620064: RNCC: 5 | RNVC: 9
3012308: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-518-7173
Pipe Flange

145187173
E29203PN16DN125A: RNCC: 2 | RNVC: 2

16 Feb 2000

4730-14-505-6692
Tube Tee

145056692
E28002000002: RNCC: 3 | RNVC: 2

26 Mar 1998

4730-14-422-0798
Anchor And Reinforcement Pipe Clamp

144220798
RISPAL5027PPDPALAS: RNCC: 3 | RNVC: 2

22 Feb 1988

4730-14-492-1221
Tube To Boss Swivel Joint

144921221
9958102: RNCC: 3 | RNVC: 2
F300 0T 006 9843: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-220-5445
Fluid Passage Bolt

142205445
0000078726: RNCC: 3 | RNVC: 2
0000078726: RNCC: 5 | RNVC: 9
78726: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-300-6434
Tube To Boss Straight Adapter

143006434
79495DET33: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-395-2657
Fluid Passage Bolt

143952657
439508: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-301-0295

4730-14-476-0464
Pipe Flange

144760464
5000043372: RNCC: 3 | RNVC: 2
1192950: RNCC: 5 | RNVC: 2

17 May 1995

4730-14-552-1150
Straight Tubing Connector

145521150
0000270520: RNCC: 3 | RNVC: 2

27 Nov 2006

4730-14-513-8333
Quick Disconnect Coupling Half

145138333
1222517: RNCC: 3 | RNVC: 2

14 Apr 1999

4730-14-536-3584
Tube Fitting Socket Welded Ferrule

145363584
C714A1110102: RNCC: 3 | RNVC: 2

29 Jul 2003

4730-14-484-2007
Hose Flange Socket Assembly

144842007
RA1M521005301: RNCC: 3 | RNVC: 2

31 Oct 1996

4730-14-459-3230
Tube Fitting Brazing Ferrule

144593230
DLT606422: RNCC: 3 | RNVC: 2
RAR1614: RNCC: 5 | RNVC: 2

25 Nov 1992

4730-14-392-9335
Tube Coupling

143929335
0024248041: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-031-7200
Bulkhead Hose Connector

140317200
R5806Z67: RNCC: 3 | RNVC: 2

14 Jun 1980

4730-14-212-5388
Fluid Pressure Line Multiple Connector

142125388
41808: RNCC: 3 | RNVC: 2
E76320126: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-496-5541
Tube To Boss Straight Adapter

144965541
643 062 04: RNCC: 3 | RNVC: 2
64306204: RNCC: 5 | RNVC: 2
F300 0T 017 4667: RNCC: 6 | RNVC: 9
F300 0T 021 6595: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-341-1288
Tube To Boss Straight Adapter

143411288
002507050P: RNCC: 3 | RNVC: 2

16 Mar 1977

4730-14-438-8154
Bulkhead Hose Connector

144388154
TB1010601: RNCC: 3 | RNVC: 2

9 Apr 1990

4730-14-228-9188

4730-14-278-0844
Diaphragme

142780844
02136008900: RNCC: 3 | RNVC: 2
021360089: RNCC: 5 | RNVC: 2
91K448: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-394-7434
Pipe Flange

143947434
761500105: RNCC: 3 | RNVC: 2

28 Aug 1984

4730-14-266-4271
Tube To Boss Straight Adapter

142664271
82099: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-387-0514
Tube Tee

143870514
MVF02886: RNCC: 3 | RNVC: 2
8203201: RNCC: 5 | RNVC: 9

24 Aug 1983

4730-14-375-7119

4730-14-309-7187
Plaque Raccord Tour

143097187
A77605: RNCC: 3 | RNVC: 2
A77605: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-326-9422

4730-14-310-1834

4730-14-274-6945

4730-14-414-5145
Tape De Pont

144145145
BN324572AF5REPA-DN125: RNCC: 2 | RNVC: 2

6 Feb 1987

4730-14-203-6465

4730-14-287-3254

4730-14-382-8496
Tube To Boss Straight Adapter

143828496
31751017: RNCC: 3 | RNVC: 2

17 Feb 1983

4730-14-243-6669
Ecrou Filtre Equipe

142436669
165104: RNCC: 3 | RNVC: 2
165104: RNCC: 5 | RNVC: 2
165104: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-219-2419
Buse Speciale

142192419
S2741: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-327-1810
Tube Fitting Clinch Sleeve

143271810
9124200027: RNCC: 3 | RNVC: 2
BLH20: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-536-5143
Bulkhead Hose Connector

145365143
PZC-A944: RNCC: 3 | RNVC: 2
PZC-A944: RNCC: 5 | RNVC: 9
EN098888: RNCC: 6 | RNVC: 9

28 Aug 2003

4730-14-423-4330
Pipe Flange

144234330
UA50088006PN150-11D1DN080: RNCC: 2 | RNVC: 2
4730HCPN150DN08011D1: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-339-9955

4730-14-262-1531

4730-14-511-2749
Tube Fitting Brazing Ferrule

145112749
9773164032: RNCC: 3 | RNVC: 2

9 Dec 1998

4730-14-434-7258
Tube Fitting Flared Sleeve

144347258
BN324595DN50AC: RNCC: 3 | RNVC: 2

3 Oct 1989

4730-14-435-4396
Self-Sealing Coupling Half

144354396
714V120: RNCC: 3 | RNVC: 2
91383202: RNCC: 5 | RNVC: 2

8 Nov 1989

4730-14-442-4166
Tube To Boss Straight Adapter

144424166
4A18L26X150NU: RNCC: 3 | RNVC: 2
104104370: RNCC: 5 | RNVC: 2
81109100: RNCC: 5 | RNVC: 2
5005030745: RNCC: 5 | RNVC: 2
5005030745: RNCC: 6 | RNVC: 9

16 Oct 1990

4730-14-368-8822
Self-Sealing Coupling Assembly

143688822
MX80DN65TYPEA: RNCC: 3 | RNVC: 2

10 Mar 1981

4730-14-375-8907
Tube Coupling Inverted Nut

143758907
5000048435: RNCC: 3 | RNVC: 2
5000048435: RNCC: 5 | RNVC: 9

30 Mar 1982

4730-14-242-0814
Lubrication Fitting

142420814
120: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-474-8872
Tube To Boss Straight Adapter

144748872
5A12L16X150C0: RNCC: 3 | RNVC: 2
105L25188: RNCC: 5 | RNVC: 2
91699513: RNCC: 5 | RNVC: 2

8 Mar 1995

4730-14-212-9973
Fluid Passage Bolt

142129973
79345: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-270-9666
Swivel Retaining Pipe Flange

142709666
344750: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-308-5651
Fluid Pressure Line Multiple Connector

143085651
6103-2986: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-446-6177
Tube To Gas Fitting Straight Adapter

144466177
1361013: RNCC: 3 | RNVC: 2

8 Apr 1991

4730-14-491-5803
Tube To Boss Straight Adapter

144915803
660481: RNCC: 3 | RNVC: 2
F300 0T 003 4226: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-504-7098
Quick Disconnect Reducer

145047098
488354E: RNCC: 3 | RNVC: 2
5001833539: RNCC: 5 | RNVC: 2

27 Feb 1998

4730-14-515-8338
Tube Coupling

145158338
HF120: RNCC: 3 | RNVC: 2
HF120: RNCC: 5 | RNVC: 9

16 Aug 1999

4730-14-244-4939
Tube To Boss Straight Adapter

142444939
50760: RNCC: 3 | RNVC: 2
512709: RNCC: 5 | RNVC: 2
50760: RNCC: 5 | RNVC: 2

1 Jan 1968

4730-14-515-3739
Fluid Pressure Line Multiple Connector

145153739
0420 3485: RNCC: 3 | RNVC: 2

13 Jul 1999

4730-14-213-8251
Flexible Tube Coupling Assembly

142138251
L32F3: RNCC: 3 | RNVC: 2
L32F3: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-528-3256
Flexible Tube Coupling Assembly

145283256
ES10A18MZ26A: RNCC: 3 | RNVC: 2

22 Jan 2002

4730-14-494-3362
Tube To Boss Straight Adapter

144943362
5000296475: RNCC: 3 | RNVC: 2
F300 0T 017 0384: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-524-5207
Tube To Boss Straight Adapter

145245207
807641: RNCC: 3 | RNVC: 2

21 Mar 2001

4730-14-554-6097
Tube Coupling

145546097
0390720210: RNCC: 3 | RNVC: 2

24 Jul 2007

4730-14-438-4403
Threaded Tube Fitting Plug

144384403
SBE 1134: RNCC: 3 | RNVC: 2
89138666: RNCC: 5 | RNVC: 2
SBE1134: RNCC: 5 | RNVC: 2

21 Mar 1990

4730-14-274-1854
Tube To Boss Straight Adapter

142741854
DM49: RNCC: 3 | RNVC: 2
DM49: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-447-8724
Bulkhead Hose Connector

144478724
WTXWLNS32: RNCC: 3 | RNVC: 2
91712769: RNCC: 5 | RNVC: 2

6 Jun 1991

4730-14-445-3018
Quick Disconnect Coupling Half

144453018
RBE08.7102IC4,5JV: RNCC: 3 | RNVC: 2

8 Feb 1991

4730-14-382-4078
Tube To Boss Straight Adapter

143824078
44329: RNCC: 3 | RNVC: 9

17 Feb 1983

4730-14-543-4372
Fluid Pressure Line Multiple Connector

145434372
072833000000055: RNCC: 3 | RNVC: 2

28 Oct 2004

4730-14-386-4232
Tube Tee

143864232
TL22: RNCC: 3 | RNVC: 9

24 Aug 1983

4730-14-341-0247
Fluid Passage Bolt

143410247
5000002233: RNCC: 3 | RNVC: 2
5000002233: RNCC: 5 | RNVC: 9

16 Mar 1977

4730-14-463-6958
Air Hose Connector

144636958
2010: RNCC: 3 | RNVC: 2

23 Jun 1993

4730-14-245-9389
Tube Tee

142459389
RA906: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-249-7396
Fluid Pressure Line Multiple Connector

142497396
201370: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-403-9480
Tube To Boss Straight Adapter

144039480
615988: RNCC: 3 | RNVC: 2

11 Sep 1985

4730-14-220-7295
Tube-Hose Fitting Compression Sleeve

142207295
R06: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-338-0914

4730-14-326-1908

4730-14-242-2136

4730-14-297-8919
Corps De Manchon

142978919
411MA0743REP1: RNCC: 3 | RNVC: 2
411MA743REP1: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-521-9815
Quick Disconnect Plug

145219815
04AT25: RNCC: 3 | RNVC: 2

27 Sep 2000

4730-14-545-5802
Swivel Retaining Pipe Flange

145455802
BTAL1143: RNCC: 3 | RNVC: 2
BTAL1143: RNCC: 5 | RNVC: 9

21 Apr 2005

4730-14-393-4450
Tube To Boss Straight Adapter

143934450
0000252130: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-282-5522
Fluid Passage Bolt

142825522
710656: RNCC: 3 | RNVC: 9
062710656: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-502-7622
Lubricant Pressure Relief Fitting

145027622
6E6285: RNCC: 3 | RNVC: 2

17 Dec 1997

4730-14-540-7355
Tube To Boss Straight Adapter

145407355
38051099: RNCC: 3 | RNVC: 2
00671A: RNCC: 5 | RNVC: 2
4848ZG8613181051: RNCC: 6 | RNVC: 9

22 Apr 2004

4730-14-400-1763
Tube To Boss Straight Adapter

144001763
BTH33801322: RNCC: 3 | RNVC: 2

24 Apr 1985

4730-14-378-2944
Tube Coupling

143782944
RM006: RNCC: 3 | RNVC: 2

20 Jul 1982

4730-14-409-7351
Fluid Filter Element

144097351
233311: RNCC: 3 | RNVC: 2
233311: RNCC: 5 | RNVC: 9

28 May 1986

4730-14-031-8668
Tube-Hose Fitting Compression Sleeve

140318668
1469350008: RNCC: 3 | RNVC: 9
14693500: RNCC: 5 | RNVC: 2
0703200800: RNCC: 5 | RNVC: 2
0703200800: RNCC: 5 | RNVC: 9

5 Jul 1980

4730-14-417-7812
Tube To Boss Straight Adapter

144177812
LW117-NC2208L: RNCC: 3 | RNVC: 2
8405222147NU: RNCC: 5 | RNVC: 2

22 Jul 1987

4730-14-541-5779
Tube Coupling

145415779
3215: RNCC: 3 | RNVC: 9

10 Jun 2004

4730-14-513-2832
Tube-Hose Fitting Compression Sleeve

145132832
GSM1934DET12: RNCC: 3 | RNVC: 2

10 Mar 1999

4730-14-496-4399
Tube To Boss Straight Adapter

144964399
403698: RNCC: 3 | RNVC: 2
F300 0T 021 5329: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-532-4030
Fluid Pressure Line Multiple Connector

145324030
RA1M726212N1: RNCC: 3 | RNVC: 2

30 Oct 2002

4730-14-553-7679
Pipe Flange

145537679
100 016: RNCC: 3 | RNVC: 2
100 016: RNCC: 3 | RNVC: 2

21 May 2007

4730-14-344-5745
Fluid Pressure Line Multiple Connector

143445745
109-10NU: RNCC: 3 | RNVC: 2

9 Sep 1977

4730-14-390-6795
Fluid Passage Bolt

143906795
99641184001: RNCC: 3 | RNVC: 2
99-641-184-001: RNCC: 5 | RNVC: 2
410898A: RNCC: 5 | RNVC: 2
ASSY117: RNCC: 5 | RNVC: 9

26 Jan 1984

4730-14-567-2894
Hose Coupling

145672894
3476-25: RNCC: 3 | RNVC: 2

2 Mar 2011

4730-14-356-2995
Tube To Boss Straight Adapter

143562995
MS1289-10-11: RNCC: 3 | RNVC: 2

25 Apr 1979

4730-14-447-8945
Quick Disconnect Coupling Half

144478945
RBE19-6155IC: RNCC: 3 | RNVC: 2
85-694-2040: RNCC: 6 | RNVC: 9

6 Jun 1991

4730-14-376-1563
Tube To Boss Straight Adapter

143761563
502302: RNCC: 3 | RNVC: 2
85-692-1756: RNCC: 6 | RNVC: 9

30 Mar 1982

4730-14-389-3920
Embout Dadaptation

143893920
MKE02-10: RNCC: 3 | RNVC: 2

20 Dec 1983

4730-14-501-2365
Tube To Boss Straight Adapter

145012365
471-142: RNCC: 3 | RNVC: 2
471.142: RNCC: 3 | RNVC: 2
F300 0T 025 2770: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-321-8792
Tube To Boss Straight Adapter

143218792
Q1G52-42-39X200: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-249-3753
Bouchon Filete Spec

142493753
321A28-0115-20: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-278-3095
Tube To Boss Straight Adapter

142783095
10 8-10XG1-4GAZCY: RNCC: 3 | RNVC: 2
10 8-10XG1-4GAZCY: RNCC: 3 | RNVC: 2
10-8-10X1-4: RNCC: 5 | RNVC: 2
0946775270: RNCC: 5 | RNVC: 2
946677527: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-489-4673
Flange To Hose Elbow

144894673
10077331: RNCC: 3 | RNVC: 2

23 Jul 1997

4730-14-218-8407
Tube To Boss Straight Adapter

142188407
0000128537: RNCC: 3 | RNVC: 2
128537: RNCC: 5 | RNVC: 9
0000128537: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-427-8512
Corps Special

144278512
AS34TQ104GREP13: RNCC: 3 | RNVC: 2

17 Nov 1988

4730-14-569-8663
Hose Clamp

145698663
171366: RNCC: 3 | RNVC: 2

25 Oct 2011

4730-14-494-5543
Quick Disconnect Coupling Assembly

144945543
643 485 26: RNCC: 3 | RNVC: 2
F300 0T 017 4723: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-460-7340
Fluid Passage Bolt

144607340
52S1002108: RNCC: 3 | RNVC: 2
52S1002108: RNCC: 5 | RNVC: 2

8 Feb 1993

4730-14-533-2342
Fluid Passage Bolt

145332342
H109499: RNCC: 3 | RNVC: 2

29 Jan 2003

4730-14-513-1030
Lubrication Fitting

145131030
801904067: RNCC: 3 | RNVC: 2

3 Mar 1999

4730-14-518-8470
Pipeline Flexible Spacer

145188470
C0108: RNCC: 3 | RNVC: 2

23 Feb 2000

4730-14-449-7283
Tube Coupling

144497283
721B914: RNCC: 3 | RNVC: 2
89232734: RNCC: 5 | RNVC: 2

4 Sep 1991

4730-14-279-7441
Fluid Passage Bolt

142797441
28800: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-436-2547
Quick Disconnect Coupling Half

144362547
HA0533200: RNCC: 3 | RNVC: 2

12 Dec 1989

4730-14-430-8807
Tube To Boss Straight Adapter

144308807
EGE28LMEDA3C: RNCC: 3 | RNVC: 9
EGE28LMEDA3C: RNCC: 3 | RNVC: 9
EVGE28PLMED: RNCC: 5 | RNVC: 2

28 Mar 1989

4730-14-430-4526
Tube Tee

144304526
130-8X13: RNCC: 3 | RNVC: 2

22 Mar 1989

4730-14-515-8669
Valve Adapter Assembly

145158669
20714728: RNCC: 3 | RNVC: 2
20714728: RNCC: 5 | RNVC: 2

18 Aug 1999

4730-14-506-0387
Flange To Tube Straight Adapter

145060387
RA1M534101181: RNCC: 3 | RNVC: 2

2 Apr 1998

4730-14-429-1258
Fluid Pressure Line Multiple Connector

144291258
058520R2231: RNCC: 3 | RNVC: 2
058520R: RNCC: 5 | RNVC: 2

11 Jan 1989

4730-14-297-5599
Tube Tee

142975599
R6514: RNCC: 3 | RNVC: 2
ARS6514: RNCC: 5 | RNVC: 1

1 Jan 1973

4730-14-509-2397
Tube Coupling

145092397
0022800003: RNCC: 3 | RNVC: 2
7M793: RNCC: 3 | RNVC: 2
0022800003: RNCC: 5 | RNVC: 2

21 Oct 1998

4730-14-334-4389
Bulkhead Hose Connector

143344389
PPA12: RNCC: 3 | RNVC: 2

1 Jun 1976

4730-14-482-0126
Self-Sealing Coupling Half

144820126
96177017: RNCC: 3 | RNVC: 2

13 Jun 1996

4730-14-465-0533
Tube To Boss Straight Adapter

144650533
7365: RNCC: 3 | RNVC: 2

8 Sep 1993

4730-14-400-2637
Tube Tee

144002637
0301020410: RNCC: 3 | RNVC: 2

24 Apr 1985

4730-14-235-1903
Tube Tee

142351903
1TR8X8X4NN: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-389-8211
Tube Tee

143898211
89041200: RNCC: 3 | RNVC: 2

20 Dec 1983

4730-14-452-9299
Lubricant Pressure Relief Fitting

144529299
14540642W: RNCC: 3 | RNVC: 2

28 Jan 1992

4730-14-451-8041
Tube-Hose Fitting Compression Sleeve

144518041
TXS38: RNCC: 3 | RNVC: 2
91713700: RNCC: 5 | RNVC: 2

4 Dec 1991

4730-14-499-0607
Tube To Boss Straight Adapter

144990607
5000824742: RNCC: 3 | RNVC: 2
A0705: RNCC: 5 | RNVC: 1
A0705: RNCC: 5 | RNVC: 9
F300 0T 016 7773: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-518-9728
Fluid Flow Restrictor

145189728
707619: RNCC: 3 | RNVC: 2

1 Mar 2000

4730-14-323-9226
Pipe Flange

143239226
000MA0858F7: RNCC: 3 | RNVC: 2
000MA858F7: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-040-7721
Bulkhead Hose Connector

140407721
R7406Z19: RNCC: 3 | RNVC: 2

27 Jun 1997

4730-14-500-8260
Quick Disconnect Elbow

145008260
EBFR6: RNCC: 3 | RNVC: 2
F300 0T 024 8462: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-248-3455

4730-14-549-5890
Fluid Flow Restrictor

145495890
NGS1I7414: RNCC: 3 | RNVC: 2

20 Apr 2006

4730-14-518-1426
Tube To Boss Straight Adapter

145181426
5000822653: RNCC: 3 | RNVC: 2

26 Jan 2000

4730-14-477-8048
Hose To Gas Fitting Straight Adapter

144778048
18231621: RNCC: 3 | RNVC: 2

26 Sep 1995

4730-14-310-7636
Pipe Flange

143107636
100213: RNCC: 3 | RNVC: 2
8098179: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-506-0379
Tube To Boss Straight Adapter

145060379
RA1M523101141: RNCC: 3 | RNVC: 2

2 Apr 1998

4730-14-448-9838
Tube To Boss Straight Adapter

144489838
XGE16PSR: RNCC: 3 | RNVC: 2

24 Jul 1991

4730-14-274-6529
Tube To Boss Straight Adapter

142746529
DLT045152: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-422-4407
Embase Entree Air

144224407
152723: RNCC: 3 | RNVC: 2

3 Mar 1988

4730-14-243-2883

4730-14-261-8457

4730-14-243-5770

4730-14-227-2191
Bride Speciale

142272191
DLT002993: RNCC: 3 | RNVC: 2
DLT02993: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-568-3539
Quick Disconnect Reducer

145683539
5010607686: RNCC: 1 | RNVC: 2
3168 10 08: RNCC: 3 | RNVC: 2
25374617: RNCC: 5 | RNVC: 2

25 May 2011

4730-14-562-5432
Tube To Boss Tee

145625432
3198 10 17: RNCC: 3 | RNVC: 2
FS0002408: RNCC: 6 | RNVC: 9

3 Nov 2009

4730-14-338-0854

4730-14-264-6290

4730-14-255-8377

4730-14-546-4240
Tube To Boss Straight Adapter

145464240
00717R0540: RNCC: 3 | RNVC: 2

4 Jul 2005

4730-14-447-5298
Hose To Gas Fitting Straight Adapter

144475298
4CM2979A: RNCC: 3 | RNVC: 2

28 May 1991

4730-14-515-8670
Valve Adapter Assembly

145158670
20714729: RNCC: 3 | RNVC: 2

18 Aug 1999

4730-14-499-1129
Hose To Boss Straight Adapter

144991129
4DL8 1-4R: RNCC: 3 | RNVC: 9
A07051741: RNCC: 5 | RNVC: 2
A07051741: RNCC: 5 | RNVC: 9
F300 0T 018 3129: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-471-3064
Self-Sealing Coupling Assembly

144713064
SF07506AU2008: RNCC: 3 | RNVC: 2

17 Aug 1994

4730-14-453-4713
Flange To Tube Straight Adapter

144534713
3CM1575A: RNCC: 3 | RNVC: 2

19 Feb 1992

4730-14-534-2277
Tube Fitting Clinch Sleeve

145342277
NNM0010031872698: RNCC: 2 | RNVC: 2

17 Mar 2003

4730-14-518-5275
Tube Tee

145185275
50000785490: RNCC: 3 | RNVC: 2

9 Feb 2000

4730-14-428-7990
Flange To Tube Straight Adapter

144287990
COLLETCMN20348DN125NAVINIC10: RNCC: 3 | RNVC: 2

21 Dec 1988

4730-14-205-0396
Raccord Dadaptation

142050396
821-401CH023REP7: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-462-2051
Flange To Hose Straight Adapter

144622051
MAT204-01-02: RNCC: 3 | RNVC: 2

15 Apr 1993

4730-14-225-5656
Tamis Filtre A Sedi

142255656
NO PRIMARY REF14-225-5656: RNCC: 3 | RNVC: 2
10671DET13: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-548-7950
Quick Disconnect Coupling Half

145487950
RBE11.1819/OS: RNCC: 3 | RNVC: 2

13 Feb 2006

4730-14-032-3692
Tube To Boss Straight Adapter

140323692
NO PRIMARY REF14-032-3692: RNCC: 3 | RNVC: 2
Q1-5GE14S1-2NPTEQUIPE: RNCC: 5 | RNVC: 9

17 Feb 1983

4730-14-259-3824
Bouchon Avant

142593824
J05403-01-0200P004: RNCC: 3 | RNVC: 2
PA253-5M835-5P14A: RNCC: 5 | RNVC: 9

1 Jan 1969

4730-14-445-3021
Quick Disconnect Coupling Half

144453021
RBE08.2101-ICODJVVD: RNCC: 3 | RNVC: 2

8 Feb 1991

4730-14-317-0076
Tube To Boss Straight Adapter

143170076
A28266: RNCC: 3 | RNVC: 2
FS2169: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-222-5068

4730-14-389-8738

4730-14-476-2299
Tube Fitting Flared Sleeve

144762299
5005030734: RNCC: 3 | RNVC: 2
5005030734: RNCC: 6 | RNVC: 9

31 May 1995

4730-14-350-5879
Quick Disconnect Coupling Half

143505879
STH03334: RNCC: 3 | RNVC: 2
STH03334: RNCC: 5 | RNVC: 2

12 Jul 1978

4730-14-489-6021
Hydraulic Manifold Assembly

144896021
COLLE85062X00: RNCC: 3 | RNVC: 2

6 Aug 1997

4730-14-488-2884
Tube Fitting Clinch Sleeve

144882884
5003.526: RNCC: 3 | RNVC: 2

28 Apr 1997

4730-14-537-6380
Lubrication Fitting

145376380
5005097019: RNCC: 3 | RNVC: 2
5005097019: RNCC: 6 | RNVC: 9

17 Nov 2003

4730-14-489-3886
Hose To Boss Straight Adapter

144893886
AAKT 4L: RNCC: 3 | RNVC: 2

16 Jul 1997

4730-14-535-1397
Tube Coupling Inverted Nut

145351397
898130310: RNCC: 3 | RNVC: 2
5000043398: RNCC: 5 | RNVC: 2
5000043398: RNCC: 6 | RNVC: 9

14 May 2003

4730-14-374-3970
Tube Fitting Clinch Sleeve

143743970
41240600: RNCC: 3 | RNVC: 2

8 Dec 1981

4730-14-450-5465
Pipe Flange

144505465
3500493: RNCC: 3 | RNVC: 2
91712900: RNCC: 5 | RNVC: 2

9 Oct 1991

4730-14-528-9157
Tube Tee

145289157
8935017854: RNCC: 3 | RNVC: 2

22 Feb 2002

4730-14-519-3650
Flange To Grooved Clamp Straight Adapter

145193650
C792A1013201: RNCC: 3 | RNVC: 2

15 Mar 2000

4730-14-553-0364
Fluid Passage Bolt

145530364
0039906: RNCC: 3 | RNVC: 2

23 Feb 2007

4730-14-542-7104
Tube Coupling

145427104
2021062201: RNCC: 3 | RNVC: 2

28 Jul 2004

4730-14-543-9691
Lubrication Fitting

145439691
9200032: RNCC: 3 | RNVC: 2

19 Dec 2004

4730-14-408-1008
Fluid Passage Bolt

144081008
0308857980: RNCC: 3 | RNVC: 2
89277653: RNCC: 5 | RNVC: 2

19 Mar 1986

4730-14-492-4337
Tube To Boss Straight Adapter

144924337
5000567128: RNCC: 3 | RNVC: 2
F300 0T 007 6298: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-452-0848
Tube Fitting Clinch Sleeve

144520848
KA12X10N: RNCC: 3 | RNVC: 2
LV016NS1210N: RNCC: 5 | RNVC: 2

18 Dec 1991

4730-14-470-2808
Sediment Strainer Element

144702808
BSNGCFF005F19B: RNCC: 3 | RNVC: 2

14 Jun 1994

4730-14-555-0775
Flexible Tube Coupling Assembly

145550775
L25SF3: RNCC: 3 | RNVC: 2

27 Sep 2007

4730-14-452-5593
Pipe Flange

144525593
LN320033F26DN250: RNCC: 3 | RNVC: 2

13 Jan 1992

4730-14-380-9962
Hose Coupling Assembly

143809962
200251: RNCC: 3 | RNVC: 9

14 Dec 1982

4730-14-487-0527
Fluid Pressure Line Multiple Connector

144870527
4500A4502186: RNCC: 3 | RNVC: 2
4500A4502186: RNCC: 5 | RNVC: 9
SDM4500A4502186: RNCC: 5 | RNVC: 9

2 Apr 1997

4730-14-249-8461
Hose To Boss Straight Adapter

142498461
0000139008: RNCC: 3 | RNVC: 2
0000139008: RNCC: 5 | RNVC: 9
139008: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-402-0394
Hose To Boss Straight Adapter

144020394
215430: RNCC: 3 | RNVC: 2
10118: RNCC: 5 | RNVC: 9

26 Jun 1985

4730-14-504-7072
Tube To Boss Straight Adapter

145047072
456003S: RNCC: 3 | RNVC: 2
5001833874: RNCC: 3 | RNVC: 2

27 Feb 1998

4730-14-404-8935
Tube Coupling

144048935
S3951CF: RNCC: 3 | RNVC: 2

20 Nov 1985

4730-14-359-6089
Bulkhead Hose Connector

143596089
106-14CL20: RNCC: 3 | RNVC: 2
3A14CL20: RNCC: 3 | RNVC: 2

15 Oct 1979

4730-14-414-1140
Tube Coupling

144141140
37271D: RNCC: 3 | RNVC: 2
37271: RNCC: 5 | RNVC: 2

22 Jan 1987

4730-14-238-6137
Tube Coupling Inverted Nut

142386137
14625400: RNCC: 3 | RNVC: 2
062250356: RNCC: 5 | RNVC: 9
250356: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-539-7719
Check Valve Adapter

145397719
356009011: RNCC: 3 | RNVC: 2

5 Feb 2004

4730-14-504-5979
Hose To Boss Straight Adapter

145045979
09930024: RNCC: 3 | RNVC: 2

25 Feb 1998

4730-14-293-6416
Tube To Boss Straight Adapter

142936416
15210: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-436-8437
Hose Coupling Assembly

144368437
DA2C500054500: RNCC: 3 | RNVC: 2

3 Jan 1990

4730-14-295-4835
Retenue Ecrou-Racco

142954835
0400320040: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-237-6821

4730-14-550-7902
Fluid Pressure Line Multiple Connector

145507902
GA-4: RNCC: 3 | RNVC: 2
GA-4: RNCC: 5 | RNVC: 9

17 Jul 2006

4730-14-374-1398
Tube To Boss Straight Adapter

143741398
4218A1: RNCC: 3 | RNVC: 2

8 Dec 1981

4730-14-362-0147
Quick Disconnect Coupling Half

143620147
5022LAIT0N: RNCC: 3 | RNVC: 2

20 Feb 1980

4730-14-495-1218
Quick Disconnect Coupling Assembly

144951218
09085107A: RNCC: 3 | RNVC: 2
09085107: RNCC: 5 | RNVC: 2
F300 0T 018 3920: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-431-8418
Bulkhead Hose Connector

144318418
PM1A728112010: RNCC: 3 | RNVC: 2
PM1A728112010: RNCC: 5 | RNVC: 2

10 May 1989

4730-14-283-5489
Tube To Boss Straight Adapter

142835489
262259: RNCC: 3 | RNVC: 2
262259: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-031-3810
Bulkhead Hose Connector

140313810
A11A232952002U2: RNCC: 3 | RNVC: 2

14 Jun 1980

4730-14-568-5105
Fluid Pressure Line Multiple Connector

145685105
2407 G17 710 S: RNCC: 3 | RNVC: 2

9 Jun 2011

4730-14-325-9061
Pipe Flange

143259061
AS34TV106REP12: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-367-7334

4730-14-297-8935

4730-14-320-8712
Racco Traver Embout

143208712
A70-72845: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-287-8649
Tube To Boss Straight Adapter

142878649
40060: RNCC: 3 | RNVC: 2
R220205-19: RNCC: 5 | RNVC: 2
7701009249: RNCC: 5 | RNVC: 2
LB40060: RNCC: 5 | RNVC: 2
220-19: RNCC: 5 | RNVC: 2
7701009249: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-251-9015
Tube To Boss Straight Adapter

142519015
52-38-33-42CYL: RNCC: 3 | RNVC: 2
UML38X33-42N: RNCC: 3 | RNVC: 2
4L38-33-42CYL: RNCC: 3 | RNVC: 2
ML38-42: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-353-4195
Fluid Passage Bolt

143534195
99641204001: RNCC: 3 | RNVC: 2
99-641-204-001: RNCC: 5 | RNVC: 2

8 Dec 1978

4730-14-381-9317
Tube To Boss Straight Adapter

143819317
NO PRIMARY REF14-381-9317: RNCC: 3 | RNVC: 2
226920: RNCC: 5 | RNVC: 9

25 Jan 1983

4730-14-477-0847
Hydraulic Manifold Assembly

144770847
1980-85-02: RNCC: 3 | RNVC: 2
1980-85: RNCC: 5 | RNVC: 2
1980-85AAA: RNCC: 5 | RNVC: 2

24 Jul 1995

4730-14-455-6334
Self-Sealing Coupling Assembly Parts Kit

144556334
N010-276-89: RNCC: 3 | RNVC: 2
N01027689: RNCC: 5 | RNVC: 2

3 Jun 1992

4730-14-498-7506
Tube To Boss Straight Adapter

144987506
NO PRIMARY REF14-498-7506: RNCC: 3 | RNVC: 2
121506106: RNCC: 5 | RNVC: 9
12-15-06-106: RNCC: 5 | RNVC: 9
F300 0T 008 2457: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-432-4391
Tube Tee

144324391
TR14X10X14: RNCC: 3 | RNVC: 2
14X10X14-79225: RNCC: 5 | RNVC: 2
TR14X10X14-79225: RNCC: 5 | RNVC: 2

13 Jun 1989

4730-14-464-1554
Sediment Strainer Element

144641554
NO PRIMARY REF14-464-1554: RNCC: 3 | RNVC: 2
106-73706: RNCC: 5 | RNVC: 2
106-73706: RNCC: 5 | RNVC: 2

15 Jul 1993

4730-14-573-0219
Tube Tee

145730219
NSA855023-12: RNCC: 1 | RNVC: 2
PE20207-12: RNCC: 3 | RNVC: 2
NSA855023-12: RNCC: 5 | RNVC: 2

4 Sep 2012

4730-14-378-2394
Demi Manchon-Union

143782394
MAT200-04-00-1: RNCC: 3 | RNVC: 2

20 Jul 1982

4730-14-209-7117
Bouchon Special

142097117
613-403-024-0: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-382-0610
Fluid Pressure Line Multiple Connector

143820610
3210-32-31-922-3: RNCC: 3 | RNVC: 2
85-692-2067: RNCC: 6 | RNVC: 9

25 Jan 1983

4730-14-562-5987
Pipeline Flexible Spacer

145625987
R1/200/KR 320-WG/P: RNCC: 3 | RNVC: 2

6 Nov 2009

4730-14-231-9628
Mamelon Double Spec

142319628
501-709-631-0: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-564-7465
Quick Disconnect Coupling Half

145647465
RBE11.7819/OD/IC/0: RNCC: 3 | RNVC: 2
91629908: RNCC: 5 | RNVC: 2
91629908: RNCC: 5 | RNVC: 2
RBE11-7819/OD/IC CODE 0: RNCC: 5 | RNVC: 2
RBE11.7819/0D/IC/0: RNCC: 5 | RNVC: 9

2 Jun 2010

4730-14-333-5139
Barillet A 5 Voies

143335139
GSM163-006BF9: RNCC: 3 | RNVC: 2
GSM163-06BF9: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-303-0044
Tube Fitting Brazing Ferrule

143030044
GSM163-011REP36-2F6: RNCC: 3 | RNVC: 2
GSM163-11AREP36-2: RNCC: 5 | RNVC: 2

1 Jan 1973

Load More Results