What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 95 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 95 of 185

4730-14-538-9669
Return Tube Bend

145389669
NGM0053236601233: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-358-8402
Tube To Boss Straight Adapter

143588402
421293: RNCC: 3 | RNVC: 2

7 Sep 1979

4730-14-502-5971
Tube Tee

145025971
5005030172: RNCC: 3 | RNVC: 2

17 Dec 1997

4730-14-401-7509
Tube Coupling

144017509
E25F: RNCC: 3 | RNVC: 2

13 Jun 1985

4730-14-480-7481
Hose To Boss Straight Adapter

144807481
33 41 64: RNCC: 3 | RNVC: 2

28 Mar 1996

4730-14-377-8089
Tube To Boss Straight Adapter

143778089
8450046266: RNCC: 3 | RNVC: 2

10 Jun 1982

4730-14-314-2041
Lubrication Fitting

143142041
A21795: RNCC: 3 | RNVC: 2
FG1: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-540-3263
Tube Coupling Assembly

145403263
NNM0023513001515: RNCC: 3 | RNVC: 2

18 Mar 2004

4730-14-526-2462
Hydraulic System Accessories Manifold

145262462
10617069: RNCC: 3 | RNVC: 2

11 Jul 2001

4730-14-338-2523
Bronze Tube Coude

143382523
CSN123: RNCC: 3 | RNVC: 2

6 Nov 1976

4730-14-565-7867
Flange To Tube Elbow

145657867
0000373090: RNCC: 3 | RNVC: 2

22 Sep 2010

4730-14-223-8710

4730-14-360-0754
Rallonge De Valve

143600754
15045: RNCC: 3 | RNVC: 2
15045: RNCC: 5 | RNVC: 9

31 Oct 1979

4730-14-290-9500

4730-14-365-3472

4730-14-346-0826

4730-14-500-7960
Tube To Boss Straight Adapter

145007960
EMA3-1/4A3C: RNCC: 3 | RNVC: 2
EMA3-R1-4A3C: RNCC: 5 | RNVC: 2
EMA3R1-4A3C: RNCC: 5 | RNVC: 2
F300 0T 024 8160: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-398-5944
Tube Fitting Brazing Ferrule

143985944
4730AMF3PN250DE57: RNCC: 2 | RNVC: 2
GSM164-057F7Z0NEC: RNCC: 3 | RNVC: 2
MAT164-0354F7ZONEC: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-571-1209
Tube Fitting Clinch Sleeve

145711209
NSA855034-04: RNCC: 1 | RNVC: 2
35235PN04: RNCC: 3 | RNVC: 2
35235VN04: RNCC: 3 | RNVC: 2
35235PN04: RNCC: 5 | RNVC: 2
35235VN04: RNCC: 5 | RNVC: 2

21 Feb 2012

4730-14-446-4290
Tube To Boss Straight Adapter

144464290
RI1/2X1/4A3CX: RNCC: 3 | RNVC: 2
RI1/2X1/4A3CX: RNCC: 3 | RNVC: 9
RI1/2X1/4: RNCC: 5 | RNVC: 9

19 Mar 1991

4730-14-394-1046
Tube To Boss Straight Adapter

143941046
GSM164-069F24: RNCC: 3 | RNVC: 2

23 Jun 1984

4730-14-374-0031
Tube To Boss Straight Adapter

143740031
E50-1100: RNCC: 3 | RNVC: 2
431451: RNCC: 5 | RNVC: 2

8 Dec 1981

4730-14-398-5790
Tube Tee

143985790
GSM164-025F22: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-571-5776
Hose Clamp

145715776
ASNA0032H150: RNCC: 1 | RNVC: 2
FX13 130-150 C8 H W4: RNCC: 3 | RNVC: 9
ASNA0032H150: RNCC: 5 | RNVC: 2

11 Apr 2012

4730-14-567-2729
Tube Elbow

145672729
1091A0100-01: RNCC: 3 | RNVC: 2

1 Mar 2011

4730-14-502-2125
Contre-Bride

145022125
E64-35-3200-122F12ETF13DN150: RNCC: 3 | RNVC: 2

26 Nov 1997

4730-14-233-0446
Bouchon Filete

142330446
FL036165: RNCC: 3 | RNVC: 2
03165: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-558-7316
Tube Reducer

145587316
GEO08LMOMDCF: RNCC: 3 | RNVC: 2
82981306021: RNCC: 5 | RNVC: 2
GEO 08L M12X1,5 OMD CF: RNCC: 5 | RNVC: 2
A231004000140: RNCC: 5 | RNVC: 2

29 Oct 2008

4730-14-565-2212
Tube Tee

145652212
836.050.050 S: RNCC: 3 | RNVC: 2
SA17608: RNCC: 5 | RNVC: 2

28 Jul 2010

4730-14-258-0540

4730-14-233-6044

4730-14-341-8149
Tube Coupling

143418149
716309: RNCC: 3 | RNVC: 2
5171630900: RNCC: 5 | RNVC: 2
MAF0000001949: RNCC: 6 | RNVC: 9

14 Apr 1977

4730-14-376-7593
Fluid Pressure Line Multiple Connector

143767593
021134070201: RNCC: 3 | RNVC: 2

28 Apr 1982

4730-14-217-3609
Equerre Equipee De

142173609
460019: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-535-6092

4730-14-426-7658
Ensemble Crepine As

144267658
DLT130507: RNCC: 3 | RNVC: 2

21 Sep 1988

4730-14-518-5078
Tube To Boss Straight Adapter

145185078
HBRXX000011: RNCC: 3 | RNVC: 9

9 Feb 2000

4730-14-475-0434
Tube Coupling

144750434
166172: RNCC: 3 | RNVC: 2
89170223: RNCC: 5 | RNVC: 2

16 Mar 1995

4730-14-213-4235
Fluid Pressure Line Multiple Connector

142134235
80335: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-327-6206
Bulkhead Hose Connector

143276206
0264752340: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-515-1997
Fluid Passage Bolt

145151997
0009031100: RNCC: 3 | RNVC: 2

13 Jul 1999

4730-14-554-1225
Tube To Boss Straight Adapter

145541225
352 087: RNCC: 3 | RNVC: 2
352 087: RNCC: 3 | RNVC: 2

12 Jun 2007

4730-14-206-3169
Tube To Boss Straight Adapter

142063169
0000456993: RNCC: 3 | RNVC: 2
0000456993: RNCC: 5 | RNVC: 9
456993: RNCC: 5 | RNVC: 9
456993NU: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-230-7141
Pipe Flange

142307141
GSM1947REP16FEMELLE: RNCC: 3 | RNVC: 2
GSM1947DET16FEMELLE: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-500-8484
Tube To Boss Straight Adapter

145008484
D65201160000: RNCC: 3 | RNVC: 2
F300 0T 024 8687: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-515-2678
Tube To Boss Straight Adapter

145152678
9721002010: RNCC: 3 | RNVC: 2

13 Jul 1999

4730-14-249-3990
Tube To Boss Straight Adapter

142493990
70281184: RNCC: 3 | RNVC: 2
281184: RNCC: 5 | RNVC: 9
70281184: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-431-3731
Quick Disconnect Coupling Half

144313731
423141: RNCC: 3 | RNVC: 2
423141: RNCC: 5 | RNVC: 2

12 Apr 1989

4730-14-557-3085
Special Nipple

145573085
DET05AEBTDAM010: RNCC: 3 | RNVC: 2

2 Jun 2008

4730-14-211-2384
Tube To Boss Straight Adapter

142112384
NO PRIMARY REF14-211-2384: RNCC: 3 | RNVC: 2
440279-53: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-353-4052
Tube To Boss Straight Adapter

143534052
Q1-52-20-15-21C0NU: RNCC: 3 | RNVC: 2
MCB20V21: RNCC: 3 | RNVC: 2

8 Dec 1978

4730-14-436-2557
Quick Disconnect Coupling Half

144362557
77341-33: RNCC: 3 | RNVC: 2

12 Dec 1989

4730-14-482-7192
Filler Cap Adapter Assembly

144827192
MAT140-02-00: RNCC: 3 | RNVC: 2

25 Jul 1996

4730-14-375-7095
Tube To Boss Straight Adapter

143757095
Q1-5GE14SRK15X21CO: RNCC: 3 | RNVC: 2
8405142166: RNCC: 3 | RNVC: 2
921551: RNCC: 5 | RNVC: 2
Q1-5GE14SR1/2BSPK: RNCC: 5 | RNVC: 2

26 Feb 1982

4730-14-392-7082
Quick Disconnect Coupling Half

143927082
RBE06-6808-3: RNCC: 3 | RNVC: 2
U39-8-3: RNCC: 5 | RNVC: 2

7 Apr 1984

4730-14-553-3071
Tube Fitting Brazing Ferrule

145533071
87068: RNCC: 3 | RNVC: 2
4-87068: RNCC: 3 | RNVC: 9
9567157930: RNCC: 5 | RNVC: 2
RFL87068: RNCC: 5 | RNVC: 9

22 Mar 2007

4730-14-266-4956
Bouchon Clapet By-P

142664956
3130S62-06-902: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-570-1079
Fluid Pressure Line Multiple Connector

145701079
RA1M522004610A1: RNCC: 3 | RNVC: 2

18 Nov 2011

4730-14-564-4245
Bulkhead Hose Connector

145644245
8931040612: RNCC: 3 | RNVC: 2
A231004000116: RNCC: 5 | RNVC: 2

28 Apr 2010

4730-14-247-4734

4730-14-556-9130
Tube To Boss Straight Adapter

145569130
3000.05.05: RNCC: 3 | RNVC: 2

22 Apr 2008

4730-14-334-0335

4730-14-267-6462
Tape Securite

142676462
B352TB2D10: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-339-9885
Contre Bride

143399885
175-9: RNCC: 3 | RNVC: 9

18 Jan 1977

4730-14-512-8082
Tube Coupling

145128082
190442: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-550-8736
Tube Tee

145508736
T16F: RNCC: 3 | RNVC: 2

25 Jul 2006

4730-14-288-1486

4730-14-567-9697
Tube Union

145679697
NSA855111W5: RNCC: 1 | RNVC: 2
NSA855111W5: RNCC: 3 | RNVC: 2
NSA855111W5: RNCC: 5 | RNVC: 2

29 Apr 2011

4730-14-366-5906

4730-14-329-2543

4730-14-575-5736
Exhaust-Intake Pneumatic Muffler

145755736
06710800: RNCC: 3 | RNVC: 2
5755736: RNCC: 5 | RNVC: 2

16 Apr 2013

4730-14-229-2160

4730-14-557-1636
Union Nut

145571636
1903D943: RNCC: 3 | RNVC: 2
RE12D: RNCC: 5 | RNVC: 2

22 May 2008

4730-14-235-1763

4730-14-572-9568
Tube Tee

145729568
ET06LCF: RNCC: 3 | RNVC: 2
435615: RNCC: 5 | RNVC: 2

30 Aug 2012

4730-14-575-9051
Tube Elbow

145759051
W08LCF: RNCC: 3 | RNVC: 2
428964: RNCC: 5 | RNVC: 2

15 May 2013

4730-14-327-6158
Tube Tee

143276158
0264202630: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-540-5428
Quick Disconnect Coupling Half

145405428
NNP4730870600524: RNCC: 3 | RNVC: 2

1 Apr 2004

4730-14-477-8044
Pipe-Tube Escutcheon

144778044
088143: RNCC: 3 | RNVC: 2
6921159: RNCC: 5 | RNVC: 2

26 Sep 1995

4730-14-518-5487
Tube To Boss Straight Adapter

145185487
5000681473: RNCC: 3 | RNVC: 2

9 Feb 2000

4730-14-260-9275
Pipe Flange

142609275
7062DC1F1M66XC18: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-207-1258
Tube To Boss Straight Adapter

142071258
AFY35: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-549-3555
Non-Metallic Connecting Sleeve

145493555
1Q W33: RNCC: 3 | RNVC: 2

24 Mar 2006

4730-14-390-5612
Tube To Boss Straight Adapter

143905612
840514130066: RNCC: 3 | RNVC: 2

26 Jan 1984

4730-14-494-4855
Tube To Boss Straight Adapter

144944855
T54 981 20: RNCC: 3 | RNVC: 2
F300 0T 017 3910: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-435-3277
Tube Tee

144353277
10RA12L12L8NU: RNCC: 3 | RNVC: 2

7 Nov 1989

4730-14-236-3932
Pipe Flange

142363932
DLT015559: RNCC: 3 | RNVC: 2
DL15559: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-345-0531
Tube To Boss Straight Adapter

143450531
523106: RNCC: 3 | RNVC: 2
129356: RNCC: 5 | RNVC: 2

5 Oct 1977

4730-14-333-5405
Tube To Boss Straight Adapter

143335405
45210: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-382-8755
Tube To Boss Straight Adapter

143828755
PE60841H08: RNCC: 3 | RNVC: 2

26 Jul 2000

4730-14-518-3460
Tube To Boss Straight Adapter

145183460
HUNXX000114: RNCC: 3 | RNVC: 9

2 Feb 2000

4730-14-328-0103

4730-14-364-2553

4730-14-568-9636
Swivel Flange To Tube Elbow

145689636
CSET2225: RNCC: 3 | RNVC: 2

25 Jul 2011

4730-14-551-7129
Lubricating Oil Cup

145517129
NV.100.C: RNCC: 3 | RNVC: 2
AA000759: RNCC: 6 | RNVC: 9

18 Oct 2006

4730-14-399-1408
Te De Raccordement

143991408
620433: RNCC: 3 | RNVC: 2

6 Mar 1985

4730-14-330-1585

4730-14-570-9444
Pipeline Flexible Spacer

145709444
26058800047: RNCC: 3 | RNVC: 2

7 Feb 2012

4730-14-240-3496

4730-14-555-0092
Flexible Tube Coupling Assembly

145550092
98110401: RNCC: 3 | RNVC: 2
5005130503: RNCC: 5 | RNVC: 2

18 Sep 2007

4730-14-362-1363

4730-14-411-1757
Bulkhead Hose Connector

144111757
332A54-0010-01: RNCC: 3 | RNVC: 2

6 Aug 1986

4730-14-423-4600
Pipe Flange

144234600
UA50088006PN250-11B2SDN40: RNCC: 2 | RNVC: 2
4730HCPN250DN04011B2S: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-393-4018
Quick Disconnect Coupling Half

143934018
N010-111-81: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-277-1100
Tube To Boss Straight Adapter

142771100
LFP54-67-259: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-340-0894
Tube Tee

143400894
37-3-8C0X8-10X3-8C0LAIT0N: RNCC: 3 | RNVC: 2
37-3-8C0X8-10X3-8C0LAIT0N: RNCC: 3 | RNVC: 2

18 Jan 1977

4730-14-308-5523
Pipe Flange

143085523
GSM162-011F8DE219-1: RNCC: 3 | RNVC: 2
GSM162-11F8DE219-1: RNCC: 5 | RNVC: 2
A0143-001F23DE219-1: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-281-7386
Tube Coupling

142817386
NO PRIMARY REF14-281-7386: RNCC: 3 | RNVC: 2
WBB30W2B: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-247-9865
Sediment Strainer Element

142479865
2960-04: RNCC: 3 | RNVC: 2
VDP7011: RNCC: 5 | RNVC: 2
59062: RNCC: 5 | RNVC: 2
110721: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-263-8907
Tube To Boss Straight Adapter

142638907
702A30-0700-20: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-577-2083
Fluid-Emulsion Spray Nozzle

145772083
8813433000: RNCC: 3 | RNVC: 2

22 Aug 2013

4730-14-536-5746
Fluid Pressure Line Multiple Connector

145365746
521262: RNCC: 3 | RNVC: 2

2 Sep 2003

4730-14-339-1508
Pipe Flange

143391508
I131EH32BRIDE: RNCC: 2 | RNVC: 2

17 Dec 1976

4730-14-495-3473
Tube To Boss Straight Adapter

144953473
A77457: RNCC: 3 | RNVC: 2
F300 0T 019 1031: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-317-6519
Tube To Boss Straight Adapter

143176519
536MF14DET16: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-515-3857
Tube To Boss Straight Adapter

145153857
6200118: RNCC: 3 | RNVC: 2

13 Jul 1999

4730-14-449-9290
Tube To Boss Straight Adapter

144499290
S041121-8-1/4: RNCC: 3 | RNVC: 2
20310511: RNCC: 5 | RNVC: 2

16 Sep 1991

4730-14-291-0939

4730-14-492-3096
Fluid Passage Bolt

144923096
0608300802: RNCC: 3 | RNVC: 2
F300 0T 007 3594: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-501-1846
Tube To Boss Straight Adapter

145011846
152011: RNCC: 3 | RNVC: 2
F300 0T 025 2250: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-250-0648
Fluid Passage Bolt

142500648
99631122082: RNCC: 3 | RNVC: 2
41641: RNCC: 3 | RNVC: 2
23068: RNCC: 5 | RNVC: 2
B012X100R0F: RNCC: 5 | RNVC: 2
0003136478: RNCC: 5 | RNVC: 2
41641: RNCC: 5 | RNVC: 9
B012X100: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-553-1327
Tube Fitting Socket Welded Ferrule

145531327
0249840300: RNCC: 3 | RNVC: 2

6 Mar 2007

4730-14-564-7966
Hydraulic System Accessories Manifold

145647966
E15500: RNCC: 3 | RNVC: 2

7 Jun 2010

4730-14-367-1864

4730-14-213-1792

4730-14-565-2204
Tube Tee

145652204
830.050.075: RNCC: 3 | RNVC: 2
SA017502: RNCC: 5 | RNVC: 2

28 Jul 2010

4730-14-340-1214

4730-14-212-1205

4730-14-316-5563
Tube To Boss Straight Adapter

143165563
321A97-0105-26: RNCC: 3 | RNVC: 2
321-97-0105-26: RNCC: 5 | RNVC: 2
85-670-3850: RNCC: 6 | RNVC: 9

1 Jan 1975

4730-14-371-2985
Tube To Boss Straight Adapter

143712985
1204 12 16150 Z58: RNCC: 3 | RNVC: 2
1204-12-16X150Z41: RNCC: 5 | RNVC: 2
5000165676: RNCC: 5 | RNVC: 2
5000165676: RNCC: 5 | RNVC: 9

5 Aug 1981

4730-14-417-4559
Fluid Pressure Line Multiple Connector

144174559
LV501-CS3033S: RNCC: 3 | RNVC: 2
0MA30X33-200S: RNCC: 5 | RNVC: 2
OMA30X33-200S: RNCC: 5 | RNVC: 2
PDP0701: RNCC: 5 | RNVC: 2

8 Jul 1987

4730-14-347-6166
Pipe Expansion Joint

143476166
307-225-100-25-80MN7066CC1: RNCC: 3 | RNVC: 2

1 Mar 1978

4730-14-447-8278
Lubricant Pressure Relief Fitting

144478278
CLAPET50-60DIA1-2JOINTVITON: RNCC: 3 | RNVC: 2
91720652: RNCC: 5 | RNVC: 2

6 Jun 1991

4730-14-374-7603
Fluid Passage Bolt

143747603
1-1108ZA00-07: RNCC: 3 | RNVC: 9
1-1108ZA00-07: RNCC: 5 | RNVC: 9

30 Jan 1982

4730-14-515-4585
Hose To Gas Fitting Straight Adapter

145154585
A013511 04 05: RNCC: 3 | RNVC: 2
2055-G13-5: RNCC: 5 | RNVC: 2
2055-G13-05: RNCC: 5 | RNVC: 9

13 Jul 1999

4730-14-378-2395
Tube Union

143782395
MAT002-01-00-1: RNCC: 3 | RNVC: 2

20 Jul 1982

4730-14-435-8790
Quick Disconnect Coupling Half

144358790
1040-819: RNCC: 3 | RNVC: 2

27 Nov 1989

4730-14-469-7369
Hose To Boss Straight Adapter

144697369
232187: RNCC: 3 | RNVC: 2

9 May 1994

4730-14-397-9339
Tube To Hose Straight Adapter

143979339
LN16: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-526-4675
Bulkhead Hose Connector

145264675
RA1M725200017: RNCC: 3 | RNVC: 2

1 Aug 2001

4730-14-321-7596
Tube To Boss Straight Adapter

143217596
BGA21: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-513-2228
Fluid Passage Bolt

145132228
800705541: RNCC: 3 | RNVC: 2

10 Mar 1999

4730-14-504-4775
Return Tube Bend

145044775
TR95507: RNCC: 3 | RNVC: 2

18 Feb 1998

4730-14-504-4629
Quick Disconnect Elbow

145044629
7681E000: RNCC: 3 | RNVC: 2

18 Feb 1998

4730-14-214-4978
Tube Tee

142144978
RA6406: RNCC: 3 | RNVC: 2
R6406: RNCC: 5 | RNVC: 2
277169: RNCC: 5 | RNVC: 2
277169: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-313-1070

4730-14-365-2819

4730-14-506-0340
Flange To Tube Elbow

145060340
RA1M521101141: RNCC: 3 | RNVC: 2

2 Apr 1998

4730-14-488-8376
Tube Fitting Clinch Sleeve

144888376
5003.529: RNCC: 3 | RNVC: 2

5 Jun 1997

4730-14-470-5202
Quick-Disconnect Nipple

144705202
525 1012: RNCC: 3 | RNVC: 2
1067342X00: RNCC: 5 | RNVC: 2

22 Jun 1994

4730-14-464-3313
Return Tube Bend

144643313
EW12LOMDA3C: RNCC: 3 | RNVC: 2
EW12L0MDA3C: RNCC: 3 | RNVC: 9
EW12L0MDA3C: RNCC: 3 | RNVC: 9
EVW12PL0MDKA3C: RNCC: 5 | RNVC: 2
EVW12PL0MDKA3C: RNCC: 5 | RNVC: 9

28 Jul 1993

4730-14-538-9682
Pipe Flange

145389682
NGM0053276502293: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-211-6559
Fluid Passage Bolt

142116559
104080: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-311-8774
Tube To Boss Straight Adapter

143118774
0249151990: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-220-6131
Tube Tee

142206131
R16X16X20: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-261-3561
Bouchon Filete Spec

142613561
79537A: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-260-9190

4730-14-513-0676
Tube Coupling

145130676
800041437: RNCC: 3 | RNVC: 2

3 Mar 1999

4730-14-516-7545
Hose Coupling Assembly

145167545
10337697: RNCC: 3 | RNVC: 2

13 Oct 1999

4730-14-512-9518
Tube To Boss Straight Adapter

145129518
HA0522000: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-220-6281
Fluid Pressure Line Multiple Connector

142206281
265629: RNCC: 3 | RNVC: 2
265629: RNCC: 5 | RNVC: 2

1 Jan 1965

4730-14-554-1173
Tube To Boss Straight Adapter

145541173
352 1043: RNCC: 3 | RNVC: 2

12 Jun 2007

4730-14-531-5925
Tube To Boss Straight Adapter

145315925
3172X005: RNCC: 3 | RNVC: 2
3172X005: RNCC: 3 | RNVC: 2

3 Sep 2002

4730-14-509-2683
Tube To Boss Swivel Joint

145092683
0000300830: RNCC: 3 | RNVC: 2

21 Oct 1998

4730-14-494-8851
Tube Tee

144948851
5420332: RNCC: 3 | RNVC: 2
F300 0T 018 0397: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-335-4804

4730-14-363-2085

4730-14-362-7678

4730-14-367-6472
Tube Coupling

143676472
R08373-30: RNCC: 3 | RNVC: 2
301511: RNCC: 5 | RNVC: 2
R08373-30: RNCC: 5 | RNVC: 2

19 Jan 1981

4730-14-299-8562
Tube To Boss Straight Adapter

142998562
4730AJUNI0NMALE0RIRBSM30X200CA25: RNCC: 2 | RNVC: 2
Q1-5204JC25-30X200: RNCC: 3 | RNVC: 2
GSM164-014F49: RNCC: 3 | RNVC: 2
ORK25X30-200N: RNCC: 3 | RNVC: 2
UMA10X18-150N: RNCC: 3 | RNVC: 2
5CA25-30X200RJS: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-233-6045

4730-14-238-6752

4730-14-229-8310

4730-14-214-5212
Tube Coupling Inverted Nut

142145212
R5414: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-422-8710
Tube-Hose Fitting Compression Sleeve

144228710
BI8S: RNCC: 3 | RNVC: 9

23 Mar 1988

4730-14-355-2957
Tube To Boss Straight Adapter

143552957
4L1H3: RNCC: 3 | RNVC: 2
UL1H3: RNCC: 5 | RNVC: 2

19 Mar 1979

4730-14-512-0600
Tube To Boss Straight Adapter

145120600
0053636: RNCC: 3 | RNVC: 2
93159731: RNCC: 3 | RNVC: 9

3 Feb 1999

4730-14-469-4480
Hose To Boss Straight Adapter

144694480
17311620: RNCC: 3 | RNVC: 2

26 Apr 1994

4730-14-283-5400
Tube To Boss Straight Adapter

142835400
271506: RNCC: 3 | RNVC: 2
271506: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-209-6306
Tube Tee

142096306
108087: RNCC: 3 | RNVC: 2
M108087: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-450-6383
Tube To Hose Straight Adapter

144506383
1461081: RNCC: 3 | RNVC: 2
1461081: RNCC: 5 | RNVC: 2

16 Oct 1991

4730-14-521-1719
Tube Tee

145211719
139132: RNCC: 3 | RNVC: 2

12 Jul 2000

4730-14-409-5518
Tube Tee

144095518
160G712108-95: RNCC: 3 | RNVC: 2

28 May 1986

4730-14-300-7490
Fluid Pressure Line Multiple Connector

143007490
411MA0295F24: RNCC: 3 | RNVC: 2
411MA295F24: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-538-0810
Pipe Flange

145380810
NGM0010030723051: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-358-7458
Sediment Strainer Element

143587458
20009-23000: RNCC: 3 | RNVC: 2

7 Sep 1979

4730-14-512-7405
Special-Shaped Hose Clamp

145127405
800039696: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-371-4869
Fluid Pressure Line Multiple Connector

143714869
205301: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-468-6405
Tube To Boss Straight Adapter

144686405
008683035P: RNCC: 3 | RNVC: 2

15 Mar 1994

4730-14-554-0385
Anchor And Reinforcement Pipe Clamp

145540385
228 161: RNCC: 3 | RNVC: 2
228 161: RNCC: 3 | RNVC: 2

7 Jun 2007

4730-14-421-5602
Fluid Passage Bolt

144215602
0000290790: RNCC: 3 | RNVC: 2

19 Jan 1988

4730-14-279-2539

4730-14-430-6835
Quick Disconnect Coupling Half

144306835
480436: RNCC: 3 | RNVC: 2

22 Mar 1989

4730-14-407-3837
Tube Coupling

144073837
21807: RNCC: 3 | RNVC: 2

12 Feb 1986

4730-14-532-7002
Hose To Boss Straight Adapter

145327002
F10A725030: RNCC: 3 | RNVC: 2

4 Dec 2002

4730-14-503-1690
Bulkhead Hose Connector

145031690
RA1M523304170: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-447-6077
Fluid Pressure Line Multiple Connector

144476077
216524: RNCC: 3 | RNVC: 2

29 May 1991

4730-14-546-3501
Hydraulic Swivel Joint

145463501
9050080: RNCC: 3 | RNVC: 2
101746: RNCC: 5 | RNVC: 2

28 Jun 2005

4730-14-470-5180
Pipe Flange

144705180
1067734N00: RNCC: 3 | RNVC: 2

22 Jun 1994

4730-14-555-0577
Tube To Boss Straight Adapter

145550577
EC 1056: RNCC: 3 | RNVC: 2
M4ZS560D4004: RNCC: 5 | RNVC: 2

25 Sep 2007

4730-14-535-6383
Tube To Boss Straight Adapter

145356383
81114701: RNCC: 3 | RNVC: 2
5005030337: RNCC: 5 | RNVC: 2

11 Jun 2003

4730-14-416-5163
Tube To Boss Straight Adapter

144165163
4730AB4.4DN30EQUIPE: RNCC: 2 | RNVC: 2
84053034: RNCC: 3 | RNVC: 2

10 Jun 1987

4730-14-572-1551
Hose Coupling

145721551
PAAG141798: RNCC: 3 | RNVC: 2

12 Jun 2012

4730-14-559-8474
Hose To Gas Fitting Straight Adapter

145598474
1DC27860: RNCC: 3 | RNVC: 2

24 Feb 2009

4730-14-421-0255
Tube To Boss Straight Adapter

144210255
2413371066: RNCC: 3 | RNVC: 2
2413371066: RNCC: 5 | RNVC: 2
2413371066: RNCC: 5 | RNVC: 9

6 Jan 1988

4730-14-269-9241

4730-14-354-0950

4730-14-243-7589

4730-14-332-4661
Tube Coupling

143324661
U1113F16VP10-2-25CD4: RNCC: 2 | RNVC: 2

2 Jul 1975

4730-14-485-0512
Tube Coupling

144850512
331A32-3204-20: RNCC: 3 | RNVC: 2

19 Dec 1996

4730-14-273-5144
Pipe Flange

142735144
7062CB1F1-171UE10Z1: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-453-9504
Tube To Hose Straight Adapter

144539504
LN324-100-11-077DN32: RNCC: 3 | RNVC: 2
RAB9304: RNCC: 5 | RNVC: 2

17 Mar 1992

4730-14-495-2064
Graisseur

144952064
NO PRIMARY REF14-495-2064: RNCC: 3 | RNVC: 2
00003500: RNCC: 5 | RNVC: 9
F300 0T 018 6444: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-267-8574
Raccord Largable

142678574
DNM25-6AENS: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-451-5010
Fluid Passage Bolt

144515010
121-64-92-21: RNCC: 3 | RNVC: 2
121-64-92-21: RNCC: 5 | RNVC: 9

21 Nov 1991

4730-14-288-5425
Pipe Flange

142885425
E29203PN16DN80-88-9-1-A-A37: RNCC: 2 | RNVC: 2
E29-283DN80: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-447-6117
Fluid Passage Bolt

144476117
21141754: RNCC: 3 | RNVC: 2
4-014-11/83000.11: RNCC: 5 | RNVC: 9

29 May 1991

4730-14-040-5579
Tube To Boss Straight Adapter

140405579
702A30-0921-20: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-340-5704
Valve Equipee

143405704
9790A: RNCC: 3 | RNVC: 2

14 Feb 1977

4730-14-563-6012
Tube Tee

145636012
05G010: RNCC: 3 | RNVC: 2

24 Feb 2010

4730-14-331-1007

4730-14-249-8333

4730-14-295-8884

4730-14-406-7547
Tube Tee

144067547
T21: RNCC: 3 | RNVC: 2

8 Jan 1986

4730-14-378-0045
Tube Coupling

143780045
16293215: RNCC: 3 | RNVC: 2
16293215: RNCC: 5 | RNVC: 9

20 Jul 1982

4730-14-452-5585
Pipe Flange

144525585
LN320033F26DN40: RNCC: 3 | RNVC: 2

13 Jan 1992

4730-14-403-3636
Quick Disconnect Coupling Assembly

144033636
221983: RNCC: 3 | RNVC: 2

21 Aug 1985

4730-14-365-6841
Tube To Boss Straight Adapter

143656841
9701067858: RNCC: 3 | RNVC: 2
VDP3686: RNCC: 5 | RNVC: 2

8 Oct 1980

4730-14-455-3686
Fluid Pressure Line Multiple Connector

144553686
992630: RNCC: 3 | RNVC: 2
992630: RNCC: 3 | RNVC: 9

21 May 1992

4730-14-444-5436
Quick Disconnect Coupling Half

144445436
T2JJBAB8: RNCC: 3 | RNVC: 2
A05050321: RNCC: 5 | RNVC: 2
A05050321: RNCC: 5 | RNVC: 9

15 Jan 1991

4730-14-336-4389
Tube To Boss Straight Adapter

143364389
001804282P: RNCC: 3 | RNVC: 2

14 Aug 1976

4730-14-260-9247
Pipe Flange

142609247
7062DB1F1F87XC18: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-452-6608
Fluid Flow Restrictor

144526608
14-43995YM3: RNCC: 3 | RNVC: 2

15 Jan 1992

4730-14-338-3905
Pipe Flange

143383905
I131E150BRIDE: RNCC: 2 | RNVC: 2

6 Nov 1976

4730-14-312-3509

4730-14-543-0040
Tube Tee

145430040
SH2759-05PL05-06: RNCC: 3 | RNVC: 2

18 Aug 2004

4730-14-367-6987
Tube To Boss Straight Adapter

143676987
366A54-1001-20: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-408-9448
Tube To Boss Straight Adapter

144089448
4A6L8-13CO: RNCC: 3 | RNVC: 9

9 Apr 1986

4730-14-311-4574
Fluid Passage Bolt

143114574
702A30-0126-20: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-417-3821
Tube-Hose Fitting Compression Sleeve

144173821
LN332-133DIAM220: RNCC: 3 | RNVC: 2

7 Jul 1987

4730-14-032-0487
Tube To Boss Straight Adapter

140320487
FD1B781-17-02: RNCC: 3 | RNVC: 2

5 Jul 1980

4730-14-338-3344
Bulkhead Hose Connector

143383344
SP1-02-03: RNCC: 3 | RNVC: 2

6 Nov 1976

4730-14-306-4124
Fluid Pressure Line Multiple Connector

143064124
MAA2-67178: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-396-1005
Fluid Pressure Line Multiple Connector

143961005
NO PRIMARY REF14-396-1005: RNCC: 3 | RNVC: 2
15318830: RNCC: 5 | RNVC: 9

27 Nov 1984

4730-14-501-4960
Pipe Flange

145014960
NO PRIMARY REF14-501-4960: RNCC: 3 | RNVC: 2
NNP4730848465587: RNCC: 5 | RNVC: 9

29 Oct 1997

4730-14-279-0629
Swivel Retaining Pipe Flange

142790629
6784-1DC110: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-423-9402
Quick Disconnect Coupling Half

144239402
NO PRIMARY REF14-423-9402: RNCC: 3 | RNVC: 2
69391004: RNCC: 5 | RNVC: 9
RD004FJAUNE: RNCC: 5 | RNVC: 9

5 May 1988

4730-14-401-7562
Tube Tee

144017562
NO PRIMARY REF14-401-7562: RNCC: 3 | RNVC: 2
EA25U1ED: RNCC: 5 | RNVC: 9

13 Jun 1985

4730-14-297-6548
Tube Tee

142976548
NO PRIMARY REF14-297-6548: RNCC: 3 | RNVC: 2
168964: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-464-9631
Bulkhead Hose Connector

144649631
365A55-3923-01: RNCC: 3 | RNVC: 2

8 Sep 1993

4730-14-269-1901
Pipe Flange

142691901
7066CD1F133: RNCC: 2 | RNVC: 2
4730BB-133F: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-424-5524
Quick Disconnect Wye

144245524
RCS08-8103: RNCC: 3 | RNVC: 2

27 May 1988

4730-14-398-5891
Tube Tee

143985891
GSM164-055F11: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-386-4392
Quick Disconnect Coupling Half

143864392
S12384DB30: RNCC: 3 | RNVC: 2

24 Aug 1983

4730-14-348-4748
Bulkhead Hose Connector

143484748
9150505886: RNCC: 3 | RNVC: 2
T3040CX10001F6D44IN0X: RNCC: 5 | RNVC: 2

29 Mar 1978

4730-14-518-3314
Lubrication Fitting

145183314
AGRDX000004: RNCC: 3 | RNVC: 9

2 Feb 2000

4730-14-516-8566
Tube To Boss Straight Adapter

145168566
101162941550: RNCC: 3 | RNVC: 2

20 Oct 1999

4730-14-326-7573
Sediment Strainer Element

143267573
K40068: RNCC: 3 | RNVC: 9

2 Jul 1975

4730-14-554-1066
Tube-Pipe Fitting Kit

145541066
350 047: RNCC: 3 | RNVC: 2
350 047: RNCC: 3 | RNVC: 2

11 Jun 2007

4730-14-555-0542
Fluid Flow Restrictor

145550542
0164163960: RNCC: 3 | RNVC: 2

25 Sep 2007

4730-14-418-6390
Tube To Boss Straight Adapter

144186390
334706: RNCC: 3 | RNVC: 2

8 Sep 1987

4730-14-554-6100
Tube Coupling

145546100
0390731090: RNCC: 3 | RNVC: 2

24 Jul 2007

4730-14-331-1428
Tube To Boss Straight Adapter

143311428
3902455: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-238-7391
Fluid Passage Bolt

142387391
5171037000: RNCC: 3 | RNVC: 2
710370: RNCC: 5 | RNVC: 1
710370: RNCC: 5 | RNVC: 2
152308: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-525-0025
Quick Disconnect Coupling Half

145250025
NBA.101: RNCC: 3 | RNVC: 2
1989 066 101: RNCC: 5 | RNVC: 2

10 May 2001

4730-14-031-0620
Fluid Pressure Line Multiple Connector

140310620
55125: RNCC: 3 | RNVC: 2
VDPM02855: RNCC: 5 | RNVC: 2

14 Jun 1980

4730-14-516-9200
Pipe Flange

145169200
E29203D16X25AEK: RNCC: 2 | RNVC: 2
MTFLSP1300000REP15: RNCC: 5 | RNVC: 2

26 Oct 1999

4730-14-248-6131

4730-14-370-7799

4730-14-554-4529
Tube To Gas Fitting Straight Adapter

145544529
09930214: RNCC: 3 | RNVC: 2

10 Jul 2007

4730-14-234-9801

4730-14-223-8630

4730-14-367-5005

4730-14-539-6045
Self-Sealing Coupling Half

145396045
CAMSEC.API.4POUCES: RNCC: 3 | RNVC: 9

26 Jan 2004

4730-14-518-5095
Return Tube Bend

145185095
HCOXX000073: RNCC: 3 | RNVC: 9

9 Feb 2000

4730-14-225-3336

4730-14-267-4133

4730-14-350-2725

4730-14-237-5588
Fourrure Epaulee Sp

142375588
P32FC14X16: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-572-6488
Quick Disconnect Plug

145726488
HVC1007 06: RNCC: 3 | RNVC: 2

19 Jul 2012

4730-14-566-6540
Fluid Pressure Line Multiple Connector

145666540
WH22LROMDCF: RNCC: 3 | RNVC: 2
A231004000414: RNCC: 5 | RNVC: 2

2 Dec 2010

4730-14-426-2120
Piece De Liaison

144262120
ECHC400F133: RNCC: 3 | RNVC: 2

4 Aug 1988

4730-14-214-0840
Robinet Darret

142140840
0942250064: RNCC: 3 | RNVC: 2
0942250064: RNCC: 5 | RNVC: 9
942250064: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-566-6697
Pipe Flange

145666697
B20201: RNCC: 3 | RNVC: 2

6 Dec 2010

4730-14-268-6341

4730-14-301-8588

4730-14-263-1900
Bride A Zinc

142631900
511-410-105ENSGREP1: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-277-6547
Pipe Flange

142776547
6784-1CC14-8: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-375-7125
Tube To Boss Straight Adapter

143757125
8401384966: RNCC: 3 | RNVC: 2

26 Feb 1982

4730-14-325-6774
Pipe Flange

143256774
0000364230: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-324-7784

4730-14-253-8083

4730-14-566-7344
Pipe To Tube Tee

145667344
ET20SOMDCF: RNCC: 3 | RNVC: 2
A231004000425: RNCC: 5 | RNVC: 2

13 Dec 2010

4730-14-220-6091

4730-14-278-8153

4730-14-570-6210
Quick Disconnect Coupling Assembly

145706210
003250: RNCC: 3 | RNVC: 2

11 Jan 2012

4730-14-398-5794
Tube Tee

143985794
GSM164-025F26: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-536-4737
Hose Fitting Swaging Socket

145364737
2-11-20-56: RNCC: 3 | RNVC: 2

27 Aug 2003

4730-14-542-0650
Tube To Boss Straight Adapter

145420650
4539332-001: RNCC: 3 | RNVC: 2
502106026008A: RNCC: 3 | RNVC: 9

2 Jul 2004

4730-14-031-6466
Tube To Boss Straight Adapter

140316466
Q1-5GE14SM20X150EQUIPE: RNCC: 3 | RNVC: 2

14 Jun 1980

4730-14-464-3643
Tube Coupling Assembly

144643643
0-3601PS40A: RNCC: 3 | RNVC: 2
0-3601PS40A: RNCC: 5 | RNVC: 9

28 Jul 1993

4730-14-466-1700
Hydraulic System Accessories Manifold

144661700
158994: RNCC: 3 | RNVC: 2
89169640: RNCC: 5 | RNVC: 2

27 Oct 1993

4730-14-274-2128
Tube Coupling Inverted Nut

142742128
33533112: RNCC: 3 | RNVC: 2
8006667: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-518-5088
Return Tube Bend

145185088
HCOXX000039: RNCC: 3 | RNVC: 9

9 Feb 2000

4730-14-250-8479
Lubricating Oil Cup

142508479
6795: RNCC: 3 | RNVC: 2
906795: RNCC: 5 | RNVC: 9
062059682: RNCC: 5 | RNVC: 9
110406: RNCC: 5 | RNVC: 9
59682: RNCC: 5 | RNVC: 9
6795: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-504-0595
Tube Coupling

145040595
NNP4730878750142: RNCC: 3 | RNVC: 2

5 Feb 1998

4730-14-286-1613
Pipeline Flexible Spacer

142861613
DILAT0FLEX32HHBRIDESN0NPERCEES: RNCC: 3 | RNVC: 9

1 Jan 1972

4730-14-527-4042
Tube To Boss Straight Adapter

145274042
H77752: RNCC: 3 | RNVC: 2

24 Oct 2001

4730-14-369-4499
Sediment Strainer Element

143694499
M59328SD: RNCC: 3 | RNVC: 9

17 Apr 1981

4730-14-207-8274

4730-14-260-9184

4730-14-371-2096

4730-14-570-1070
Tube Union

145701070
NSA855111C10: RNCC: 1 | RNVC: 2
NSA855111C10: RNCC: 3 | RNVC: 2
NSA855111C10: RNCC: 5 | RNVC: 2

18 Nov 2011

4730-14-362-1320

4730-14-031-7811

4730-14-434-7086
Adaptateur Bride

144347086
BN329515C2DN400AC: RNCC: 3 | RNVC: 2

2 Oct 1989

4730-14-255-3181

4730-14-350-2427

4730-14-561-6111
Pipe To Tube Straight Adapter

145616111
10M22F82EDMLOS: RNCC: 3 | RNVC: 2
20 250 100 1910: RNCC: 5 | RNVC: 2

5 Aug 2009

4730-14-561-6065
Tube To Boss Straight Adapter

145616065
8WMLOWLNMLS: RNCC: 3 | RNVC: 2
20 250 100 1780: RNCC: 5 | RNVC: 2
001999: RNCC: 5 | RNVC: 2
4730PL0965933: RNCC: 6 | RNVC: 9

4 Aug 2009

4730-14-485-3110
Bulkhead Hose Connector

144853110
RA1M525001180: RNCC: 3 | RNVC: 2

15 Jan 1997

4730-14-460-3449
Hose To Boss Straight Adapter

144603449
67DEGRE30D25AS: RNCC: 3 | RNVC: 2
F25146910: RNCC: 5 | RNVC: 2
5000791106: RNCC: 5 | RNVC: 2

21 Jan 1993

4730-14-432-2544
Tube Repair Plug

144322544
NCHX01H013EF5REP10TAMPON: RNCC: 3 | RNVC: 2
NCHX01H013DF5REP10TAMPON: RNCC: 5 | RNVC: 2

31 May 1989

4730-14-370-8532

4730-14-406-8108
Tube Fitting Clinch Sleeve

144068108
LL023-NS33LGAZ: RNCC: 3 | RNVC: 2
84243402: RNCC: 5 | RNVC: 2

8 Jan 1986

4730-14-296-6840

4730-14-373-3094
Tube To Boss Straight Adapter

143733094
A23056-10: RNCC: 3 | RNVC: 2
A23056-10: RNCC: 5 | RNVC: 2

21 Oct 1981

4730-14-542-0550
Tube To Boss Straight Adapter

145420550
25242030-113: RNCC: 3 | RNVC: 2
502114003028A: RNCC: 3 | RNVC: 9

2 Jul 2004

4730-14-479-9507
Fluid Flow Restrictor

144799507
501-357-021-0: RNCC: 3 | RNVC: 2

14 Feb 1996

4730-14-277-6219
Tube To Boss Straight Adapter

142776219
7062BB1B1966RCET2-20UA9: RNCC: 4 | RNVC: 1

1 Jan 1971

4730-14-391-6799
Quick Disconnect Coupling Half

143916799
RBE06-2806IA3FDB: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-368-3126
Tube To Boss Straight Adapter

143683126
N06373-19: RNCC: 3 | RNVC: 2
2139433: RNCC: 5 | RNVC: 2
2139433: RNCC: 5 | RNVC: 2
2139433EE150-15: RNCC: 5 | RNVC: 2
2139433: RNCC: 5 | RNVC: 2

20 Feb 1981

4730-14-570-6718
Tube To Boss Straight Adapter

145706718
COMAP - 8246R-489: RNCC: 3 | RNVC: 2
MAMEL00079: RNCC: 3 | RNVC: 2

17 Jan 2012

4730-14-339-9014
Tube Coupling Assembly

143399014
0-3951S16X10X10A: RNCC: 3 | RNVC: 2
0-3951S16X10X10A: RNCC: 5 | RNVC: 9
85-688-9435: RNCC: 6 | RNVC: 9

18 Jan 1977

4730-14-397-7011
Embout Epaule A Sou

143977011
MAT164-0355F7: RNCC: 3 | RNVC: 2
GSM164-023F7: RNCC: 3 | RNVC: 2
4730ACF4PN250DE10,20: RNCC: 3 | RNVC: 9

14 Dec 1984

4730-14-234-8560
Raccord Orientable

142348560
104267D: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-492-2773
Union

144922773
0024248238: RNCC: 3 | RNVC: 2
F300 0T 007 2893: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-268-6508

4730-14-365-9406

4730-14-541-9721
Tube To Boss Straight Adapter

145419721
20017-379: RNCC: 3 | RNVC: 2
502122004021A: RNCC: 3 | RNVC: 9

2 Jul 2004

4730-14-447-9744
Sediment Strainer Element

144479744
6372910: RNCC: 3 | RNVC: 2

12 Jun 1991

4730-14-509-7564
Tube Coupling

145097564
501628163: RNCC: 3 | RNVC: 2
10518838: RNCC: 5 | RNVC: 2
5010579102: RNCC: 5 | RNVC: 2

5 Nov 1998

4730-14-430-6215
Flange To Tube Straight Adapter

144306215
PM1A522119005: RNCC: 3 | RNVC: 2
PM1A522119005: RNCC: 5 | RNVC: 2

22 Mar 1989

4730-14-351-2231
Fluid Pressure Line Multiple Connector

143512231
486371P: RNCC: 3 | RNVC: 2

10 Aug 1978

4730-14-352-8619
Quick Disconnect Coupling Half

143528619
STH03335: RNCC: 3 | RNVC: 2
STH03335: RNCC: 5 | RNVC: 2

14 Nov 1978

4730-14-516-7476
Quick-Disconnect Nipple

145167476
8007045: RNCC: 3 | RNVC: 2
A05051019: RNCC: 3 | RNVC: 2
Y00005962: RNCC: 3 | RNVC: 9
Y00005962: RNCC: 5 | RNVC: 9

13 Oct 1999

4730-14-211-4089
Tube To Boss Straight Adapter

142114089
29322: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-518-1797
Tube To Boss Straight Adapter

145181797
5010146247: RNCC: 3 | RNVC: 2

26 Jan 2000

4730-14-380-9963
Hose Coupling Assembly

143809963
200262: RNCC: 3 | RNVC: 9

14 Dec 1982

4730-14-360-3272
Tube To Boss Straight Adapter

143603272
59130985M01: RNCC: 3 | RNVC: 2
5000496961: RNCC: 5 | RNVC: 2
59130985M01: RNCC: 5 | RNVC: 9
5000496961: RNCC: 5 | RNVC: 9

23 Nov 1979

4730-14-478-1235
Fluid Pressure Line Multiple Connector

144781235
M609K15ABJ20: RNCC: 3 | RNVC: 2

11 Oct 1995

4730-14-232-9075
Fluid Pressure Line Multiple Connector

142329075
0000300680: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-462-2798
Flexible Tube Coupling Assembly

144622798
SMCFAGEB0060: RNCC: 3 | RNVC: 2

15 Apr 1993

4730-14-336-4815
Fluid Passage Bolt

143364815
209979: RNCC: 3 | RNVC: 2
8472099790: RNCC: 3 | RNVC: 2

14 Aug 1976

4730-14-273-5291
Pipe Flange

142735291
7062SD1F1F30UA9NFEM: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-358-0791
Fluid Pressure Line Multiple Connector

143580791
A11A782213010: RNCC: 3 | RNVC: 2

20 Jul 1979

4730-14-419-4335
Pipe Flange

144194335
B3051FS013F6A: RNCC: 3 | RNVC: 2

19 Oct 1987

4730-14-494-6164
Tube To Boss Straight Adapter

144946164
806 817 017: RNCC: 3 | RNVC: 2
F300 0T 017 5439: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-432-9058
Tube To Hose Straight Adapter

144329058
721960404: RNCC: 3 | RNVC: 2

30 Jun 1989

4730-14-031-0720
Fluid Passage Bolt

140310720
VDP3115: RNCC: 3 | RNVC: 2

14 Jun 1980

4730-14-328-2584
Pipe Flange

143282584
ZA29C9ZM: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-440-1221
Bride A Zinc

144401221
MAT162-0117F8: RNCC: 3 | RNVC: 2

11 Jul 1990

4730-14-373-3100
Tube To Boss Straight Adapter

143733100
NO PRIMARY REF14-373-3100: RNCC: 3 | RNVC: 2
226894: RNCC: 5 | RNVC: 9

21 Oct 1981

4730-14-482-7994
Self-Sealing Coupling Assembly

144827994
SMK12-06NVK: RNCC: 3 | RNVC: 2
911121009: RNCC: 5 | RNVC: 2
911121009: RNCC: 5 | RNVC: 2
SMK12-06NVK: RNCC: 5 | RNVC: 2

25 Jul 1996

4730-14-379-4266
Fluid Passage Bolt

143794266
P3-1B14-20X150: RNCC: 3 | RNVC: 2
EMDAS05393: RNCC: 5 | RNVC: 2

1 Oct 1982

4730-14-495-3586
Tube To Boss Straight Adapter

144953586
C32375-97: RNCC: 3 | RNVC: 2
F300 0T 019 1262: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-212-3303
Bouchon Special

142123303
501-211-048-0: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-371-0561
Tube Fitting Clinch Sleeve

143710561
LL001-CK38S: RNCC: 3 | RNVC: 2
8424380066: RNCC: 5 | RNVC: 2

5 Jun 1981

4730-14-571-5878
Hose Clamp

145715878
ABS0901-200: RNCC: 1 | RNVC: 2
901200: RNCC: 3 | RNVC: 2
ABS0901-200: RNCC: 5 | RNVC: 2

11 Apr 2012

4730-14-538-8527
Lubrication Fitting

145388527
NGM0021020400443: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-350-2955
Tube To Boss Straight Adapter

143502955
83672: RNCC: 3 | RNVC: 2
83672: RNCC: 5 | RNVC: 2

14 Jun 1978

4730-14-409-6310
Bulkhead Hose Connector

144096310
DA1D203535811A1: RNCC: 3 | RNVC: 2

28 May 1986

4730-14-454-1479
Fluid Pressure Line Multiple Connector

144541479
16010891S: RNCC: 3 | RNVC: 2

21 Mar 1992

4730-14-295-9628

4730-14-418-8128
Conduit Raccord

144188128
DA1D721453009: RNCC: 3 | RNVC: 2

16 Sep 1987

4730-14-216-1441

4730-14-339-9384

4730-14-569-1158
Quick Disconnect Coupling Half

145691158
20948410: RNCC: 3 | RNVC: 2

9 Aug 2011

4730-14-261-8661
Pipe Flange

142618661
RUHF15A1: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-351-0202
Tube To Boss Straight Adapter

143510202
208697: RNCC: 3 | RNVC: 2

10 Aug 1978

4730-14-321-6800
Tube To Boss Straight Adapter

143216800
0000250910: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-333-8736

4730-14-338-3336

4730-14-367-0487

4730-14-321-4387
Tube Fitting Brazing Ferrule

143214387
HM44214: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-516-9838
Quick Disconnect Coupling Half

145169838
N00321196: RNCC: 3 | RNVC: 2
B001B163: RNCC: 5 | RNVC: 2

28 Oct 1999

4730-14-501-3216
Anchor And Reinforcement Pipe Clamp

145013216
36516119: RNCC: 3 | RNVC: 2
F300 0T 025 3627: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-495-0529
Tube To Boss Straight Adapter

144950529
95637536: RNCC: 3 | RNVC: 2
F300 0T 018 2704: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-354-7535
Fluid Pressure Line Multiple Connector

143547535
150411: RNCC: 3 | RNVC: 2

20 Feb 1979

4730-14-494-8822
Tube To Boss Straight Adapter

144948822
5418792: RNCC: 3 | RNVC: 2
F300 0T 018 0368: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-504-4840
Tube To Boss Straight Adapter

145044840
UM141521: RNCC: 3 | RNVC: 2
TR95922: RNCC: 5 | RNVC: 9

18 Feb 1998

4730-14-525-7916
Tube To Boss Straight Adapter

145257916
F145329: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-420-8143
Quick Disconnect Coupling Half

144208143
009959131: RNCC: 3 | RNVC: 9

16 Dec 1987

4730-14-460-7676
Tube-Hose Fitting Compression Sleeve

144607676
1DL6Z: RNCC: 3 | RNVC: 2
434570: RNCC: 5 | RNVC: 9

9 Feb 1993

4730-14-458-3942
Flange To Hose Straight Adapter

144583942
2314460: RNCC: 3 | RNVC: 2

22 Oct 1992

4730-14-325-5440
Fluid Pressure Line Multiple Connector

143255440
188602: RNCC: 3 | RNVC: 2
5100106788: RNCC: 3 | RNVC: 2
5172157500: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-503-1677
Bulkhead Hose Connector

145031677
RA1M523203062: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-504-3254
Tube-Pipe Fitting Kit

145043254
3771340M91: RNCC: 3 | RNVC: 2

11 Feb 1998

4730-14-544-6230
Tube To Boss Straight Adapter

145446230
0134652007: RNCC: 3 | RNVC: 2

14 Feb 2005

4730-14-408-3670
Hose To Boss Straight Adapter

144083670
TTA04INOX316LELO6: RNCC: 3 | RNVC: 9
6983: RNCC: 5 | RNVC: 9

19 Mar 1986

4730-14-536-3582
Tube To Hose Straight Adapter

145363582
PE65409TE16: RNCC: 3 | RNVC: 2

29 Jul 2003

4730-14-503-1724
Bulkhead Hose Connector

145031724
RA1M533304190: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-536-4724
Hose Coupling Assembly

145364724
TR25BNAE: RNCC: 3 | RNVC: 2

27 Aug 2003

4730-14-543-8373
Fluid Pressure Line Multiple Connector

145438373
SWVE08SM0NDA3C: RNCC: 3 | RNVC: 2

14 Dec 2004

4730-14-537-6272
Pipe Flange

145376272
98550935002: RNCC: 3 | RNVC: 2

13 Nov 2003

4730-14-549-0513
Fluid Pressure Line Multiple Connector

145490513
RA1B505882001: RNCC: 3 | RNVC: 2

2 Mar 2006

4730-14-335-1353
Pipeline Flexible Spacer

143351353
I131NTE125PN16: RNCC: 2 | RNVC: 2
DILNTE125PN16: RNCC: 3 | RNVC: 2
DILNTE125PN16: RNCC: 5 | RNVC: 9

3 Jun 1976

4730-14-496-5105
Tube To Boss Straight Adapter

144965105
550066: RNCC: 3 | RNVC: 2
F300 0T 021 6154: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-474-7729
Embout Cannele

144747729
M1-1/4DIAM34: RNCC: 3 | RNVC: 2

1 Mar 1995

4730-14-262-1550
Pipe Flange

142621550
7062DJ1F1M66-5XC18: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-446-4699
Bulkhead Hose Connector

144464699
0294201520: RNCC: 3 | RNVC: 2
302-255-101-0: RNCC: 5 | RNVC: 2

20 Mar 1991

4730-14-575-0255
Sediment Strainer

145750255
704A34-629-012: RNCC: 3 | RNVC: 2

7 Mar 2013

4730-14-315-8417
Tube To Boss Straight Adapter

143158417
GSM514-001F32: RNCC: 3 | RNVC: 2
A0210-004F33: RNCC: 5 | RNVC: 2
GSM514-01F32: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-354-0895
Sediment Strainer Element

143540895
B14BA1010-081: RNCC: 3 | RNVC: 2
B14BA1010-081: RNCC: 5 | RNVC: 2
B14BA1010-081: RNCC: 5 | RNVC: 9

16 Jan 1979

4730-14-460-2730
Hose To Boss Straight Adapter

144602730
MAT301-01-01: RNCC: 3 | RNVC: 2

21 Jan 1993

4730-14-490-4287
Tube To Hose Straight Adapter

144904287
EPA23700-003PL3/4: RNCC: 3 | RNVC: 2

26 Sep 1997

4730-14-388-9955
Tube To Boss Straight Adapter

143889955
053.486.000: RNCC: 3 | RNVC: 2
53-486-000: RNCC: 5 | RNVC: 9

29 Nov 1983

4730-14-388-1607
Tube To Boss Straight Adapter

143881607
DM42-1/8PIP1/4FLARE: RNCC: 3 | RNVC: 2

12 Oct 1983

4730-14-558-8668
Tube To Boss Straight Adapter

145588668
GG197-NP08-08: RNCC: 3 | RNVC: 2

18 Nov 2008

4730-14-288-5427
Pipe Flange

142885427
E29203PN16DN125-133-1-A-A37: RNCC: 2 | RNVC: 2
E29-283DN125-133: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-446-4721
Tube Tee

144464721
0294401980: RNCC: 3 | RNVC: 2
302-299-602-0: RNCC: 5 | RNVC: 2

20 Mar 1991

4730-14-387-2636
Fluid Pressure Line Multiple Connector

143872636
8812766000: RNCC: 3 | RNVC: 2

15 Sep 1983

4730-14-437-8009
Tube Tee

144378009
31A16NU: RNCC: 3 | RNVC: 2

20 Feb 1990

4730-14-313-8534
Fluid Passage Bolt

143138534
77720030T: RNCC: 3 | RNVC: 2
72003: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-548-8785
Tube Union

145488785
0298737730: RNCC: 3 | RNVC: 2

21 Feb 2006

4730-14-261-5035

4730-14-262-4536

4730-14-350-7009

4730-14-401-0297
Tube To Gas Fitting Straight Adapter

144010297
01051013: RNCC: 3 | RNVC: 2
231-4985: RNCC: 5 | RNVC: 2

21 May 1985

4730-14-302-3164
Tube Coupling

143023164
150408: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-263-6344

4730-14-359-6347

4730-14-435-7689
Soudure Adaptateur

144357689
800A334300: RNCC: 3 | RNVC: 2

22 Nov 1989

4730-14-279-0493

4730-14-209-1223

4730-14-331-5818

4730-14-211-1973
Fluid Passage Bolt

142111973
34377: RNCC: 3 | RNVC: 2
34377: RNCC: 6 | RNVC: 9

1 Jan 1964

4730-14-546-5088
Self-Sealing Coupling Assembly

145465088
N003 107 04: RNCC: 3 | RNVC: 2
5010631010: RNCC: 5 | RNVC: 2

12 Jul 2005

4730-14-430-4392
Quick Disconnect Plug

144304392
444042: RNCC: 3 | RNVC: 2

22 Mar 1989

4730-14-391-2995
Bulkhead Hose Connector

143912995
WTXWLNS16: RNCC: 3 | RNVC: 2

1 Mar 1984

4730-14-453-3813
Quick Disconnect Plug

144533813
AQ12M0: RNCC: 3 | RNVC: 2

19 Feb 1992

4730-14-332-6662
Tube Fitting Brazing Ferrule

143326662
45417: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-559-3737
Tube Tee

145593737
T25SA3CX: RNCC: 3 | RNVC: 2

22 Dec 2008

4730-14-334-7533

4730-14-333-0293
Self Obturat Clapet

143330293
1-90322: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-368-8168
Tube To Boss Straight Adapter

143688168
9114188266: RNCC: 3 | RNVC: 2

10 Mar 1981

Load More Results