What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 94 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 94 of 185

4730-14-365-3492

4730-14-273-5585

4730-14-234-0807

4730-14-575-4733
Hose Coupling

145754733
D705 07B: RNCC: 3 | RNVC: 2
067260040: RNCC: 5 | RNVC: 2

9 Apr 2013

4730-14-548-7654
Tube To Hose Straight Adapter

145487654
EA 00704 67: RNCC: 3 | RNVC: 2

8 Feb 2006

4730-14-032-1524
Bloc De Presertissa

140321524
FM20S: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-269-2016

4730-14-371-0482

4730-14-278-8066

4730-14-557-9074
Tube Elbow

145579074
6C4OMXS: RNCC: 3 | RNVC: 2
6C4OMXS: RNCC: 5 | RNVC: 2
6C40XS: RNCC: 5 | RNVC: 2
91547132: RNCC: 5 | RNVC: 2

29 Jul 2008

4730-14-325-9040
Pipe Flange

143259040
AS34TV102REP7: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-254-2777

4730-14-356-0723

4730-14-207-2426

4730-14-518-0316
Tube Coupling

145180316
6300242: RNCC: 3 | RNVC: 2
203024008018A: RNCC: 3 | RNVC: 2
203024008018A: RNCC: 3 | RNVC: 9

21 Jan 2000

4730-14-542-7200
Filler Cap Adapter Assembly

145427200
BX38Y1B: RNCC: 3 | RNVC: 2

31 Jul 2004

4730-14-439-5434
Pipe Flange

144395434
028268M: RNCC: 3 | RNVC: 2

14 May 1990

4730-14-485-5422
Hydraulic System Accessories Manifold

144855422
15704086: RNCC: 3 | RNVC: 2

29 Jan 1997

4730-14-542-1922
Fluid Passage Bolt

145421922
409710408: RNCC: 3 | RNVC: 2
409710408: RNCC: 5 | RNVC: 9

8 Jul 2004

4730-14-545-6578
Bulkhead Hose Connector

145456578
10664834000: RNCC: 3 | RNVC: 2

26 Apr 2005

4730-14-226-7390

4730-14-375-4122
Bossa Raccord Coude

143754122
C49718: RNCC: 3 | RNVC: 2

26 Feb 1982

4730-14-556-2876
Sediment Strainer Element

145562876
RE505261: RNCC: 3 | RNVC: 2

20 Feb 2008

4730-14-369-1229

4730-14-343-5545
Bride Intercalaire

143435545
LABESSEA9930M77: RNCC: 3 | RNVC: 2
A9930M77: RNCC: 5 | RNVC: 9

16 Jun 1977

4730-14-578-4574
Lubrication Fitting

145784574
406BA105: RNCC: 3 | RNVC: 2
Y00015358: RNCC: 5 | RNVC: 2
A09903173: RNCC: 5 | RNVC: 2

2 Dec 2013

4730-14-240-2749
Raccord Special

142402749
151579: RNCC: 3 | RNVC: 2
5100103886: RNCC: 3 | RNVC: 2
5172091500: RNCC: 5 | RNVC: 2
720915: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-295-4834
Retenue Ecrou-Racco

142954834
0400320030: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-433-3641
Hose To Gas Fitting Straight Adapter

144333641
DLT587726: RNCC: 3 | RNVC: 2
DLT565179EREP10FOLIO2-1/3: RNCC: 5 | RNVC: 2

24 Jul 1989

4730-14-429-5791
Tube Tee

144295791
31A12LNU: RNCC: 3 | RNVC: 2
5005030619: RNCC: 5 | RNVC: 2
131100112NU: RNCC: 5 | RNVC: 2
5005030619: RNCC: 6 | RNVC: 9

1 Feb 1989

4730-14-327-5939
Tube To Boss Straight Adapter

143275939
C60845-1: RNCC: 3 | RNVC: 2
C60845-1: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-444-2162
Fluid Pressure Line Multiple Connector

144442162
121E93-180-40-0: RNCC: 3 | RNVC: 2

18 Dec 1990

4730-14-313-4848
Sediment Strainer Element

143134848
401MA0399REP13-2: RNCC: 3 | RNVC: 2
401MA399REP13-2: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-361-6596

4730-14-382-7900
Air Hose Connector

143827900
NO PRIMARY REF14-382-7900: RNCC: 3 | RNVC: 2
83163715: RNCC: 5 | RNVC: 9

17 Feb 1983

4730-14-383-8686
Bulkhead Hose Connector

143838686
64353280001BREPAAH-F15A23-23DN65: RNCC: 3 | RNVC: 2

11 Apr 1983

4730-14-208-8993
Raccordsouple Equi

142088993
AF16-70-4X: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-273-5111
Tube Coupling

142735111
7062BB1RCET1-36UA9: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-239-9963
Cone De Reduction

142399963
520-14-10: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-372-7856
Tube Fitting Flared Sleeve

143727856
650-461-102-0: RNCC: 3 | RNVC: 2

21 Sep 1981

4730-14-320-8067
Auto- Raccord Corps

143208067
A60-72216: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-353-1200
Tube Coupling

143531200
RC55-75: RNCC: 3 | RNVC: 2

8 Dec 1978

4730-14-356-3227
Fluid Pressure Line Multiple Connector

143563227
FD1B781-40: RNCC: 3 | RNVC: 2

25 Apr 1979

4730-14-405-9981
Quick Disconnect Coupling Assembly

144059981
CMT30E9047B-4ABRONZE UE12: RNCC: 3 | RNVC: 2

20 Dec 1985

4730-14-301-8094
Tube To Boss Straight Adapter

143018094
Q1-52-30-26-34CYLNU: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-222-6541
Tube Fitting Brazing Ferrule

142226541
GSM1297F1AF1BTABLEAU2D1-14I9: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-481-8522
Quick Disconnect Coupling Half

144818522
SSH8-62Y: RNCC: 3 | RNVC: 2
SSH8-62Y: RNCC: 3 | RNVC: 9

5 Jun 1996

4730-14-448-7441
Tube Fitting Socket Welded Ferrule

144487441
4730HP-3DE48,3: RNCC: 2 | RNVC: 2
Y07134-02-0000P003DE48,3: RNCC: 3 | RNVC: 2

9 Jul 1991

4730-14-304-8191
Tube To Boss Straight Adapter

143048191
NO PRIMARY REF14-304-8191: RNCC: 3 | RNVC: 2
11426: RNCC: 5 | RNVC: 9
11-39-11426-1: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-423-9197
Pipe Flange

144239197
410-16: RNCC: 3 | RNVC: 2

5 May 1988

4730-14-500-5547
Hydraulic Swivel Joint

145005547
E63702400000: RNCC: 3 | RNVC: 2
F300 0T 024 5731: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-550-8690
Lubrication Fitting

145508690
5002016: RNCC: 3 | RNVC: 2

25 Jul 2006

4730-14-400-9522
Bulkhead Hose Connector

144009522
DA2C204506711U1: RNCC: 3 | RNVC: 2

21 May 1985

4730-14-530-5364
Quick Disconnect Coupling Half

145305364
NBB.102: RNCC: 3 | RNVC: 2

18 Jun 2002

4730-14-528-2204
Fluid Flow Restrictor

145282204
26148003862: RNCC: 3 | RNVC: 2

11 Jan 2002

4730-14-352-7766
Tube To Boss Straight Adapter

143527766
270135: RNCC: 3 | RNVC: 2
270135: RNCC: 5 | RNVC: 2

14 Nov 1978

4730-14-042-6284
Tube To Boss Straight Adapter

140426284
50090087: RNCC: 3 | RNVC: 2
50090087: RNCC: 5 | RNVC: 9

16 Oct 1978

4730-14-368-4044
Tube To Boss Straight Adapter

143684044
23S06015: RNCC: 3 | RNVC: 2
23S06015: RNCC: 5 | RNVC: 2

20 Feb 1981

4730-14-329-2810
Pipeline Flexible Spacer

143292810
I131NTE150MAR: RNCC: 2 | RNVC: 2
DILNTE150MAR: RNCC: 3 | RNVC: 9

2 Jul 1975

4730-14-292-4191
Fluid Passage Bolt

142924191
3026770: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-367-3798
Sediment Strainer Element

143673798
158360: RNCC: 3 | RNVC: 2

11 Dec 1980

4730-14-518-3457
Tube To Boss Straight Adapter

145183457
HUNXX000098: RNCC: 3 | RNVC: 9

2 Feb 2000

4730-14-438-5143
Hose Coupling Assembly

144385143
DA2C729001320: RNCC: 3 | RNVC: 2

21 Mar 1990

4730-14-282-2458
Tube To Boss Straight Adapter

142822458
11134: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-503-3242
Tube Tee

145033242
1350-80: RNCC: 3 | RNVC: 2

9 Jan 1998

4730-14-428-6103
Tube To Boss Straight Adapter

144286103
18747: RNCC: 3 | RNVC: 2
18747: RNCC: 5 | RNVC: 9

8 Dec 1988

4730-14-439-6284
Tube To Hose Straight Adapter

144396284
22-335GP: RNCC: 3 | RNVC: 2

16 May 1990

4730-14-439-9604
Tube Coupling

144399604
20300173: RNCC: 3 | RNVC: 2

29 Jun 1990

4730-14-560-6679
Boss Outlet

145606679
10317489: RNCC: 3 | RNVC: 2

12 May 2009

4730-14-479-7997
Bulkhead Hose Connector

144797997
11095T330301: RNCC: 3 | RNVC: 2

7 Feb 1996

4730-14-492-2805
Tube To Boss Straight Adapter

144922805
0024384151: RNCC: 3 | RNVC: 2
0024384151: RNCC: 5 | RNVC: 2
F300 0T 007 2992: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-525-6775
Lubrication Fitting

145256775
20 242 070 3070: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-262-4537
Guide Element Super

142624537
82003: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-203-6518

4730-14-305-9092

4730-14-554-6094
Flange To Tube Elbow

145546094
0390720400: RNCC: 3 | RNVC: 2

24 Jul 2007

4730-14-576-8405
Pipe Flange

145768405
D84281000004: RNCC: 3 | RNVC: 2

18 Jul 2013

4730-14-558-8480
Hose Clamp

145588480
1466073: RNCC: 3 | RNVC: 2

14 Nov 2008

4730-14-559-3739
Tube Elbow

145593739
W12SA3CX: RNCC: 3 | RNVC: 2

22 Dec 2008

4730-14-300-4977

4730-14-262-1617

4730-14-549-2086
Pipe To Tube Straight Adapter

145492086
718010: RNCC: 3 | RNVC: 2

9 Mar 2006

4730-14-367-7941

4730-14-367-7808

4730-14-577-4670
Pipe Reducer

145774670
026363: RNCC: 3 | RNVC: 2

18 Sep 2013

4730-14-226-0591

4730-14-229-2695

4730-14-573-6715
Hydraulic System Accessories Manifold

145736715
704A44333100: RNCC: 1 | RNVC: 2
BHC1181: RNCC: 3 | RNVC: 2

31 Oct 2012

4730-14-236-6619

4730-14-453-6951
Fluid Pressure Line Multiple Connector

144536951
109-4-5J8X100: RNCC: 3 | RNVC: 2

5 Mar 1992

4730-14-275-5373
Embase A Souder

142755373
412N: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-345-2590
Quick Disconnect Coupling Half

143452590
408525-2: RNCC: 3 | RNVC: 2
408525-2: RNCC: 5 | RNVC: 2

5 Oct 1977

4730-14-263-7890
Collier De Fixation

142637890
DLT002446: RNCC: 3 | RNVC: 2
DLT002446: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-420-9470
Prise Equipee

144209470
406363: RNCC: 3 | RNVC: 2

6 Jan 1988

4730-14-274-3383

4730-14-299-7500

4730-14-268-5023

4730-14-575-7629
Flange To Tube Straight Adapter

145757629
M2811341600000: RNCC: 3 | RNVC: 2

29 Apr 2013

4730-14-425-8286
Equipe Raccord

144258286
9023CPV61031A: RNCC: 3 | RNVC: 2

21 Jul 1988

4730-14-218-2929

4730-14-370-8531

4730-14-289-8666

4730-14-566-8333
Fluid-Emulsion Spray Nozzle

145668333
PAI.180.00.CA.090: RNCC: 3 | RNVC: 2
010-4-7-02: RNCC: 5 | RNVC: 2
PAI.180.00.CA.090.D15: RNCC: 5 | RNVC: 2

3 Jan 2011

4730-14-432-9294
Tube To Boss Straight Adapter

144329294
UMLBGS6 1/4: RNCC: 3 | RNVC: 9

4 Jul 1989

4730-14-338-0847
Tube Tee

143380847
5-3901P32A: RNCC: 3 | RNVC: 2
5-3901P32A: RNCC: 3 | RNVC: 2

6 Nov 1976

4730-14-427-4522
Tube Tee

144274522
4730JCING323,9X17,5-273X14,2: RNCC: 2 | RNVC: 2

20 Oct 1988

4730-14-492-1070
Tube To Boss Straight Adapter

144921070
NO PRIMARY REF14-492-1070: RNCC: 3 | RNVC: 2
03-0077: RNCC: 5 | RNVC: 9
F300 0T 006 9522: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-423-4715
Pipe Flange

144234715
UA50088006PN50-11LSPDN250: RNCC: 2 | RNVC: 2
4730HCPN50DN25011LSP: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-345-2577
Swivel Retaining Pipe Flange

143452577
FD1B725-002: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-501-2381
Tube To Boss Straight Adapter

145012381
471.253: RNCC: 3 | RNVC: 2
471-253: RNCC: 3 | RNVC: 2
F300 0T 025 2786: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-256-9319
Pipe Flange

142569319
RUHB6-40-17: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-461-4752
Tube To Boss Straight Adapter

144614752
UMA25X20-27DTCW12: RNCC: 3 | RNVC: 2

10 Mar 1993

4730-14-031-6155
Tube Union

140316155
MAT164-0355F23: RNCC: 3 | RNVC: 2
GSM164-023F23: RNCC: 5 | RNVC: 2

14 Jun 1980

4730-14-319-6481
Tube To Boss Straight Adapter

143196481
NO PRIMARY REF14-319-6481: RNCC: 3 | RNVC: 2
A4-38-33X42BSPCYHP: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-345-0999
Tube Union

143450999
21-91-01-16: RNCC: 3 | RNVC: 2
21-91-01NW10: RNCC: 5 | RNVC: 2

5 Oct 1977

4730-14-453-5232
Bulkhead Hose Connector

144535232
01160800: RNCC: 3 | RNVC: 2
1160800: RNCC: 3 | RNVC: 2
231-4806: RNCC: 5 | RNVC: 2
427142: RNCC: 5 | RNVC: 2

25 Feb 1992

4730-14-501-2414
Tube To Boss Straight Adapter

145012414
475.515: RNCC: 3 | RNVC: 2
475-515: RNCC: 3 | RNVC: 2
F300 0T 025 2819: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-358-6081
Tube To Boss Straight Adapter

143586081
702A30-1527-20: RNCC: 3 | RNVC: 2

7 Sep 1979

4730-14-313-6744
Fluid Pressure Line Multiple Connector

143136744
618-27-95SK: RNCC: 3 | RNVC: 2
618-27-95INFSK: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-325-5078
Tube To Boss Straight Adapter

143255078
R3210-20X150: RNCC: 3 | RNVC: 2
EDM0470: RNCC: 5 | RNVC: 2
91313999: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-477-6817
Quick Disconnect Coupling Half

144776817
RBE19-1155/OD/IC/JE: RNCC: 3 | RNVC: 2

19 Sep 1995

4730-14-040-0621
Crepine Equipee

140400621
NO PRIMARY REF14-040-0621: RNCC: 3 | RNVC: 2
4010A: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-447-8944
Quick Disconnect Coupling Half

144478944
RBE06-7101IA6HP: RNCC: 3 | RNVC: 2
85-694-4823: RNCC: 6 | RNVC: 9

6 Jun 1991

4730-14-443-5007
Pipeline Flexible Spacer

144435007
DILATOFLEXKDN100AR/CNPN16: RNCC: 3 | RNVC: 2

27 Nov 1990

4730-14-459-3047
Tube To Boss Straight Adapter

144593047
149201: RNCC: 3 | RNVC: 2
LV035-NS1206S: RNCC: 5 | RNVC: 2

24 Nov 1992

4730-14-284-9997

4730-14-518-5090
Return Tube Bend

145185090
HCOXX000045: RNCC: 3 | RNVC: 9

9 Feb 2000

4730-14-403-0311
Tube Tee

144030311
R6418: RNCC: 3 | RNVC: 2

25 Jul 1985

4730-14-479-0954
Tube Tee

144790954
625334: RNCC: 3 | RNVC: 2

13 Dec 1995

4730-14-395-3066
Tube Tee

143953066
TH188: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-496-3983
Tube To Boss Straight Adapter

144963983
197760: RNCC: 3 | RNVC: 2
F300 0T 021 4864: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-398-1549
Sediment Strainer Element

143981549
411522: RNCC: 3 | RNVC: 2
411522: RNCC: 5 | RNVC: 2
411522: RNCC: 5 | RNVC: 9

31 Jan 1985

4730-14-295-8124
Fluid Pressure Line Multiple Connector

142958124
A59253: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-442-1746
Special-Shaped Hose Clamp

144421746
20294204: RNCC: 3 | RNVC: 2

3 Oct 1990

4730-14-502-6867
Raccord

145026867
1013913: RNCC: 3 | RNVC: 2

17 Dec 1997

4730-14-321-5801
Pipe Flange

143215801
7068E88,9GAMMM11CU-AL9NI3FE2: RNCC: 2 | RNVC: 2
U1093EB88-9: RNCC: 3 | RNVC: 2
4730BV-88,9: RNCC: 5 | RNVC: 2
7068E88-9: RNCC: 5 | RNVC: 9
7068E88,9GAMMM12CU-AL9NI3FE2: RNCC: 5 | RNVC: 9
7068E88-9C337CL2: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-544-2929
Quick Disconnect Coupling Half

145442929
RBE06-1101-IC/OD/OX: RNCC: 3 | RNVC: 2

18 Jan 2005

4730-14-484-4417
Tube Fitting Brazing Ferrule

144844417
110P162: RNCC: 3 | RNVC: 2
AS45052/10: RNCC: 5 | RNVC: 2
4210: RNCC: 5 | RNVC: 2

14 Nov 1996

4730-14-342-8887
Bloc Raccordement

143428887
A0191-011: RNCC: 3 | RNVC: 2

16 May 1977

4730-14-353-8978
Tube Union

143538978
NO PRIMARY REF14-353-8978: RNCC: 3 | RNVC: 2
270C20: RNCC: 5 | RNVC: 9

16 Jan 1979

4730-14-273-5182

4730-14-286-3380
Tube To Boss Straight Adapter

142863380
4738-6-8: RNCC: 3 | RNVC: 2
9940507: RNCC: 3 | RNVC: 2
4738-6-8: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-324-0430

4730-14-326-0173

4730-14-577-5004
Flange To Pipe Straight Adapter

145775004
12 65 08 20 00: RNCC: 3 | RNVC: 2

19 Sep 2013

4730-14-365-2781

4730-14-338-3396
Raccord Intermediai

143383396
430315: RNCC: 3 | RNVC: 9

6 Nov 1976

4730-14-339-1053

4730-14-418-9901
Kit Clapet

144189901
20006056: RNCC: 3 | RNVC: 2
40990867: RNCC: 3 | RNVC: 2
4862000204: RNCC: 3 | RNVC: 2
86200020: RNCC: 3 | RNVC: 2
40990867: RNCC: 5 | RNVC: 9
4862000204: RNCC: 5 | RNVC: 9
86200020: RNCC: 5 | RNVC: 9

28 Sep 1987

4730-14-348-0537
Raccord Tiroir

143480537
A77385: RNCC: 3 | RNVC: 2

29 Mar 1978

4730-14-571-9538
Hose-Tube Flange Lateral

145719538
1762567-81: RNCC: 3 | RNVC: 2

25 May 2012

4730-14-334-8360

4730-14-233-6891

4730-14-236-9079

4730-14-550-4315
Quick-Disconnect Nipple

145504315
HP-1002-16-FB-E4: RNCC: 3 | RNVC: 2
5010616140: RNCC: 5 | RNVC: 2
HP1002-16-FB-E4: RNCC: 5 | RNVC: 9

20 Jun 2006

4730-14-335-9341
Tube Tee

143359341
Q0-1R6X12LX12: RNCC: 3 | RNVC: 2

24 Jul 1976

4730-14-325-6363
Fluid Pressure Line Multiple Connector

143256363
RAM3006: RNCC: 3 | RNVC: 2
P32RAM3006: RNCC: 5 | RNVC: 2
01151: RNCC: 5 | RNVC: 9
11-39-01151: RNCC: 5 | RNVC: 9
85-686-7477: RNCC: 6 | RNVC: 9

2 Jul 1975

4730-14-229-8271
Tube Tee

142298271
552-000MA057F27TABLEAU2: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-321-7400
Quick Disconnect Coupling Half

143217400
11-6810IN0X: RNCC: 3 | RNVC: 2
RBE11-6810/IC: RNCC: 3 | RNVC: 2
RBE11-6810IC: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-440-1209
Embout Epaule A Sou

144401209
GSM164-023F54: RNCC: 3 | RNVC: 2
MAT164-0355F54: RNCC: 3 | RNVC: 2

11 Jul 1990

4730-14-208-2699
Tube To Boss Straight Adapter

142082699
13-8-8-13: RNCC: 3 | RNVC: 2
13-8-8-13CYL: RNCC: 3 | RNVC: 2
0946660008: RNCC: 5 | RNVC: 2
P2-13-8-8-13CYL: RNCC: 5 | RNVC: 9
0946660008: RNCC: 5 | RNVC: 9
946660008: RNCC: 5 | RNVC: 9
946660008: RNCC: 6 | RNVC: 9

1 Jan 1964

4730-14-426-7438
Tube Tee

144267438
4730HEING026,9X3,6-10,2X1,6: RNCC: 2 | RNVC: 2

20 Sep 1988

4730-14-433-3745
Tube Fitting Brazing Ferrule

144333745
DLT589232: RNCC: 3 | RNVC: 2
DLT565670AREP10AFOLIO15-1/3: RNCC: 5 | RNVC: 2

24 Jul 1989

4730-14-433-3748
Tube Fitting Brazing Ferrule

144333748
DLT589245: RNCC: 3 | RNVC: 2
DLT565670AREP20BFOLIO15-1/3: RNCC: 5 | RNVC: 2

24 Jul 1989

4730-14-405-0710
Tube Coupling

144050710
340GCU3/4 16: RNCC: 3 | RNVC: 2

20 Nov 1985

4730-14-217-3598
Tube Tee

142173598
5-39513S40X50X50P6A: RNCC: 3 | RNVC: 2
5-3951S40-50-50P6: RNCC: 5 | RNVC: 9
300652: RNCC: 5 | RNVC: 9
5-3951340X50X50P6A: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-426-7807
Tube Tee

144267807
4730HEING088,9X11-48,3X5: RNCC: 2 | RNVC: 2

21 Sep 1988

4730-14-500-8398
Quick Disconnect Elbow

145008398
EBFR12: RNCC: 3 | RNVC: 2
F300 0T 024 8600: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-576-7537
Hose To Boss Tee

145767537
RA.23.18.18: RNCC: 3 | RNVC: 2

10 Jul 2013

4730-14-342-7189
Tube Union

143427189
2785: RNCC: 3 | RNVC: 2

16 May 1977

4730-14-568-9594
Tube Elbow

145689594
CS4518: RNCC: 3 | RNVC: 2

22 Jul 2011

4730-14-315-5265

4730-14-545-2109
Filler Cap Adapter Assembly

145452109
P428610: RNCC: 3 | RNVC: 2
6KK809: RNCC: 5 | RNVC: 2

24 Mar 2005

4730-14-321-5859

4730-14-434-7394
Tube Coupling

144347394
01011478: RNCC: 3 | RNVC: 2

3 Oct 1989

4730-14-535-9961
Flexible Tube Coupling Assembly

145359961
RA1M741214600A1: RNCC: 3 | RNVC: 2

4 Jul 2003

4730-14-503-2023
Hose Coupling Assembly

145032023
RP1A500053250: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-321-5003
Pipe Flange

143215003
C11338B: RNCC: 3 | RNVC: 2
C11338: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-360-7191
Variateur De Debit

143607191
BAZ94840: RNCC: 3 | RNVC: 2

19 Dec 1979

4730-14-216-1146

4730-14-561-7946
Tube Elbow

145617946
EW28LMEDOMDCF: RNCC: 3 | RNVC: 2
EW28LMEDOMDCF: RNCC: 5 | RNVC: 9

8 Sep 2009

4730-14-550-1214
Tube To Boss Straight Adapter

145501214
783 B 06 08T: RNCC: 3 | RNVC: 2
783B0608T: RNCC: 5 | RNVC: 2
74783B0608T: RNCC: 5 | RNVC: 2
783-B-06-08T: RNCC: 5 | RNVC: 9

1 Jun 2006

4730-14-519-5003
Quick Disconnect Coupling Half

145195003
RBE03.1100/JV: RNCC: 3 | RNVC: 2
RBE03.1100-JV: RNCC: 5 | RNVC: 2

22 Mar 2000

4730-14-303-1089
Pipe Flange

143031089
U1194-273: RNCC: 2 | RNVC: 2
4730BA-273: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-500-8050
Tube To Boss Straight Adapter

145008050
EMA3/8X1ORA3C: RNCC: 3 | RNVC: 2
EMA3/M8X1ORA3C: RNCC: 5 | RNVC: 2

7 Oct 1998

4730-14-333-5084
Raccord Flexible

143335084
GSM166-004F10: RNCC: 3 | RNVC: 2
GSM166-04F10: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-576-0603
Flange To Tube Elbow

145760603
M2821343200000: RNCC: 3 | RNVC: 2

28 May 2013

4730-14-334-3365

4730-14-299-6007

4730-14-269-1807

4730-14-506-8890
Tube Tee

145068890
130G3 4-1 2: RNCC: 3 | RNVC: 2

27 May 1998

4730-14-547-4657
Pressure Plug Retention Cap

145474657
700791-1: RNCC: 3 | RNVC: 2

13 Oct 2005

4730-14-325-6211
Bulkhead Hose Connector

143256211
121B52-125-13-0: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-536-5637
Quick Disconnect Coupling Half

145365637
TT4XS10-1-4: RNCC: 3 | RNVC: 2
520689: RNCC: 3 | RNVC: 2

2 Sep 2003

4730-14-499-8657
Tube To Boss Straight Adapter

144998657
DTAT4-40-00-12M: RNCC: 3 | RNVC: 2
F300 0T 023 8586: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-386-4995
Tube To Boss Straight Adapter

143864995
NO PRIMARY REF14-386-4995: RNCC: 3 | RNVC: 2
B21AC1110-028: RNCC: 5 | RNVC: 9

24 Aug 1983

4730-14-508-1029
Tube To Boss Straight Adapter

145081029
F8BA12-16M22: RNCC: 3 | RNVC: 2
A05050246: RNCC: 5 | RNVC: 9

26 Aug 1998

4730-14-427-8459
Pipe Flange

144278459
013-258-000: RNCC: 3 | RNVC: 2
D29797D: RNCC: 5 | RNVC: 2

17 Nov 1988

4730-14-311-4513
Tube To Boss Straight Adapter

143114513
3130S95-51-036: RNCC: 3 | RNVC: 2

7 Mar 1996

4730-14-567-2416
Tube Elbow

145672416
ASNA3764-1612: RNCC: 1 | RNVC: 2
PE20212J-1612: RNCC: 3 | RNVC: 2
ASNA3764-1612: RNCC: 5 | RNVC: 2

24 Feb 2011

4730-14-423-4220
Pipe Flange

144234220
UA50088006PN100-11C1DN125: RNCC: 2 | RNVC: 2
4730HCPN100DN12511C1: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-546-4521
Tube To Boss Straight Adapter

145464521
4DL22/33X200NU: RNCC: 3 | RNVC: 2
5010631818: RNCC: 5 | RNVC: 2

6 Jul 2005

4730-14-210-9630
Lubrication Fitting Adapter

142109630
G29-40: RNCC: 3 | RNVC: 9

1 Jan 1964

4730-14-339-0960
Bulkhead Hose Connector

143390960
GSM425-004F43: RNCC: 3 | RNVC: 2
GSM425-04F43: RNCC: 5 | RNVC: 2

17 Dec 1976

4730-14-406-9815
Tube To Boss Straight Adapter

144069815
GSM164-058F13: RNCC: 3 | RNVC: 2

22 Jan 1986

4730-14-236-8646
Fluid Passage Bolt

142368646
321A75-0191-20: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-429-5474
Pipe Expansion Joint

144295474
NO PRIMARY REF14-429-5474: RNCC: 3 | RNVC: 2
DLT607251: RNCC: 5 | RNVC: 2
M18004/1: RNCC: 5 | RNVC: 9

30 Jan 1989

4730-14-430-7177
Bulkhead Hose Connector

144307177
PM1A744100031: RNCC: 3 | RNVC: 2
PM1A744100031: RNCC: 5 | RNVC: 2

22 Mar 1989

4730-14-302-2993
Fluid Pressure Line Multiple Connector

143022993
000541282P: RNCC: 3 | RNVC: 2
0UT1-112: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-504-7147
Tube To Boss Straight Adapter

145047147
5001833670: RNCC: 3 | RNVC: 2
488416M: RNCC: 3 | RNVC: 2

27 Feb 1998

4730-14-265-9509
Tube To Boss Straight Adapter

142659509
MF22: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-527-4210
Tube To Boss Straight Adapter

145274210
P108250V: RNCC: 3 | RNVC: 2

24 Oct 2001

4730-14-409-3505
Tube Fitting Flared Sleeve

144093505
406061918: RNCC: 3 | RNVC: 9

28 May 1986

4730-14-554-5931
Flange To Tube Straight Adapter

145545931
0000370950: RNCC: 3 | RNVC: 2

23 Jul 2007

4730-14-273-5022
Tube To Boss Straight Adapter

142735022
7062BA1RCET1-8C337A: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-349-5271
Tube Fitting Clinch Sleeve

143495271
91241800: RNCC: 3 | RNVC: 2
BAH18: RNCC: 5 | RNVC: 9

22 May 1978

4730-14-546-2605
Fluid Flow Restrictor

145462605
190101174-690: RNCC: 3 | RNVC: 2
190101174-690: RNCC: 5 | RNVC: 2

21 Jun 2005

4730-14-032-0106
Tube Tee

140320106
0000364160: RNCC: 3 | RNVC: 2

5 Jul 1980

4730-14-450-0831
Pipe Flange

144500831
DLT111717: RNCC: 3 | RNVC: 2
DLT111 717: RNCC: 5 | RNVC: 2

23 Sep 1991

4730-14-459-3014
Fluid Passage Bolt

144593014
DLT024783: RNCC: 3 | RNVC: 2
RAR1608: RNCC: 5 | RNVC: 2

24 Nov 1992

4730-14-505-5372
Quick Disconnect Elbow

145055372
1897: RNCC: 3 | RNVC: 2

23 Mar 1998

4730-14-400-9517
Bulkhead Hose Connector

144009517
DA2C203535811: RNCC: 3 | RNVC: 2

21 May 1985

4730-14-216-2128
Tube Repair Plug

142162128
R508: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-555-8950
Tube Tee

145558950
0319707070: RNCC: 3 | RNVC: 2

3 Jan 2008

4730-14-314-4676
Fluid Pressure Line Multiple Connector

143144676
182148: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-519-5866
Quick-Disconnect Nipple

145195866
AE87346H: RNCC: 3 | RNVC: 2

22 Mar 2000

4730-14-464-0906
Tube Nipple

4730-14-275-0322

4730-14-229-5783
Raccord Souple Spec

142295783
AF10C: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-311-5732

4730-14-365-3045

4730-14-444-1140

4730-14-576-8461
Pipeline Air Drier And Cooler

145768461
D86403130000: RNCC: 3 | RNVC: 2

19 Jul 2013

4730-14-569-3995
Quick Disconnect Coupling Half

145693995
FIGURE901M-INOX-DN32: RNCC: 3 | RNVC: 2
901M-INOX-DN32: RNCC: 5 | RNVC: 2
FIG.901M-INOX-DN32: RNCC: 5 | RNVC: 2

12 Sep 2011

4730-14-540-3261
Tube Coupling Assembly

145403261
NNM0023513001511: RNCC: 3 | RNVC: 2

18 Mar 2004

4730-14-454-9818
Tube To Boss Straight Adapter

144549818
040B0132: RNCC: 3 | RNVC: 2
40B0132: RNCC: 5 | RNVC: 2

30 Apr 1992

4730-14-296-2857
Pipe Flange

142962857
0243150650: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-435-0022
Tube Tee

144350022
1TR25 08 25: RNCC: 3 | RNVC: 2
1TR25X8X25: RNCC: 5 | RNVC: 2

11 Oct 1989

4730-14-281-0009
Tube To Boss Straight Adapter

142810009
40267D: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-239-2774

4730-14-234-8242
Raccord Pour Tube E

142348242
28862: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-381-9957

4730-14-325-0526
Tuyauterie Embout

143250526
AQ4N: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-397-5669
Tube To Boss Straight Adapter

143975669
0000409228: RNCC: 3 | RNVC: 2

14 Dec 1984

4730-14-527-8905
Quick Disconnect Coupling Half

145278905
SM08808AU0040: RNCC: 3 | RNVC: 2

28 Nov 2001

4730-14-323-4840
Lubricant Pressure Relief Fitting

143234840
0210170050: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-498-7865
Tube To Boss Straight Adapter

144987865
C102943510: RNCC: 3 | RNVC: 2
C102943510: RNCC: 3 | RNVC: 2
F300 0T 008 4387: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-243-6141
Vis De Purge

142436141
2006B: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-513-3692
Tube Coupling

145133692
64306906: RNCC: 3 | RNVC: 2

17 Mar 1999

4730-14-539-1090
Tube Coupling Assembly

145391090
NGM0099086024729: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-336-9451
Fluid Passage Bolt

143369451
61-75-75: RNCC: 3 | RNVC: 2

7 Oct 1976

4730-14-411-5444
Adapteur

144115444
520622: RNCC: 3 | RNVC: 2

20 Aug 1986

4730-14-526-4674
Bulkhead Hose Connector

145264674
RA1M725200015: RNCC: 3 | RNVC: 2

1 Aug 2001

4730-14-548-4832
Tube Fitting Socket Welded Ferrule

145484832
508443: RNCC: 3 | RNVC: 2

20 Jan 2006

4730-14-325-8395

4730-14-203-6519

4730-14-417-7717
Tube To Boss Straight Adapter

144177717
Q15GE21-3S1/2BSPNU: RNCC: 3 | RNVC: 2
8401222166NU: RNCC: 3 | RNVC: 2

22 Jul 1987

4730-14-388-9954
Tube To Boss Straight Adapter

143889954
053.485.000: RNCC: 3 | RNVC: 2
53-485-000: RNCC: 5 | RNVC: 9

29 Nov 1983

4730-14-347-7477
Tube To Boss Straight Adapter

143477477
GSM524-038F13: RNCC: 3 | RNVC: 2
A0348-001F18: RNCC: 5 | RNVC: 2

1 Mar 1978

4730-14-380-0744
Sediment Strainer Element

143800744
R14432-42: RNCC: 3 | RNVC: 2
R14432-42: RNCC: 3 | RNVC: 2
301583: RNCC: 5 | RNVC: 2

8 Nov 1982

4730-14-257-2580
Fluid Passage Bolt

142572580
702A30-0125-20: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-513-0293
Branched Tubing Connector

145130293
702A30-5500-58: RNCC: 3 | RNVC: 2

1 Mar 1999

4730-14-222-6548
Tube Fitting Brazing Ferrule

142226548
GSM1297F1AF1BTABLEAU2D1-25I18: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-423-4599
Pipe Flange

144234599
UA50088006PN250-11B2SDN32: RNCC: 2 | RNVC: 2
4730HCPN250DN03211B2S: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-367-6990
Tube Tee

143676990
366A54-1004-20: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-213-5701
Pipe To Tube Straight Adapter

142135701
6899-4902: RNCC: 3 | RNVC: 9

1 Jan 1964

4730-14-457-8025
Pipe Flange

144578025
4730JADN065-11D1S: RNCC: 2 | RNVC: 2

24 Sep 1992

4730-14-397-0377
Tube To Boss Straight Adapter

143970377
A013516 16 16: RNCC: 3 | RNVC: 2
2816G33-20: RNCC: 5 | RNVC: 9

1 Dec 1984

4730-14-422-7553
Quick Disconnect Coupling Half

144227553
NO PRIMARY REF14-422-7553: RNCC: 3 | RNVC: 2
91608693: RNCC: 5 | RNVC: 2
69281110: RNCC: 5 | RNVC: 9

17 Mar 1988

4730-14-381-3545
Tube To Boss Straight Adapter

143813545
0946677542: RNCC: 3 | RNVC: 2
0946677542: RNCC: 5 | RNVC: 9
946677542: RNCC: 5 | RNVC: 9
946677542: RNCC: 6 | RNVC: 9

25 Jan 1983

4730-14-378-8205
Tube To Boss Straight Adapter

143788205
413440: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-402-1672
Tube To Boss Straight Adapter

144021672
MLB126013001: RNCC: 3 | RNVC: 2
RAC013040002: RNCC: 5 | RNVC: 2
MLB126013001: RNCC: 5 | RNVC: 2

26 Jun 1985

4730-14-386-9646
Tube-Hose Fitting Compression Sleeve

143869646
BI30S: RNCC: 3 | RNVC: 9

24 Aug 1983

4730-14-386-0023
Tube To Boss Straight Adapter

143860023
5000604389: RNCC: 3 | RNVC: 2
5000604389: RNCC: 5 | RNVC: 9
5000604389: RNCC: 6 | RNVC: 9

24 Aug 1983

4730-14-408-5460
Fluid Pressure Line Multiple Connector

144085460
129956: RNCC: 3 | RNVC: 2

2 Apr 1986

4730-14-523-3022
Tube To Boss Straight Adapter

145233022
9001DAG402: RNCC: 3 | RNVC: 2

10 Jan 2001

4730-14-554-1158
Tube To Boss Straight Adapter

145541158
352 165: RNCC: 3 | RNVC: 2

12 Jun 2007

4730-14-370-4958
Hose Coupling Assembly

143704958
9945505: RNCC: 3 | RNVC: 2

18 May 1981

4730-14-424-2389
Tube Fitting Clinch Sleeve

144242389
1A16L: RNCC: 3 | RNVC: 2
71100800: RNCC: 5 | RNVC: 2
91610977: RNCC: 5 | RNVC: 2
5005030006: RNCC: 5 | RNVC: 2
5005030006: RNCC: 6 | RNVC: 9

19 May 1988

4730-14-408-5650
Tube Tee

144085650
EVT12LB2A: RNCC: 3 | RNVC: 2
427339: RNCC: 5 | RNVC: 2

2 Apr 1986

4730-14-406-1400
Hose To Boss Straight Adapter

144061400
61453: RNCC: 3 | RNVC: 2

8 Jan 1986

4730-14-374-3988
Tube To Boss Straight Adapter

143743988
7750: RNCC: 3 | RNVC: 9

8 Dec 1981

4730-14-387-5451
Pipe Expansion Joint

143875451
24442801400: RNCC: 3 | RNVC: 2
244428014: RNCC: 5 | RNVC: 9

15 Sep 1983

4730-14-203-6488

4730-14-492-6187
Tube To Boss Straight Adapter

144926187
7701015226: RNCC: 3 | RNVC: 2
F300 0T 008 1769: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-383-1378
Tube To Boss Straight Adapter

143831378
S3646: RNCC: 3 | RNVC: 2

17 Mar 1983

4730-14-350-4936
Tube Coupling

143504936
0000129651: RNCC: 3 | RNVC: 2
0000129651: RNCC: 5 | RNVC: 9
129651: RNCC: 5 | RNVC: 9

12 Jul 1978

4730-14-356-1724
Tube To Boss Straight Adapter

143561724
9120131330: RNCC: 3 | RNVC: 2

25 Apr 1979

4730-14-371-0544

4730-14-339-0940

4730-14-365-3039

4730-14-530-0251
Tube To Boss Straight Adapter

145300251
10607692: RNCC: 3 | RNVC: 2

30 Apr 2002

4730-14-338-3696
Quick Disconnect Coupling Half

143383696
RBE06-1151/IA: RNCC: 3 | RNVC: 2
RBE6-1151IA: RNCC: 5 | RNVC: 2

6 Nov 1976

4730-14-338-2572
Graisseur Equerre

143382572
5012000-10X100: RNCC: 3 | RNVC: 2
ALG5012000-10X100: RNCC: 5 | RNVC: 9

6 Nov 1976

4730-14-262-1473

4730-14-275-9901
Bouchon Anneau Ense

142759901
BR76522M41P46P47: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-262-1528

4730-14-378-6539

4730-14-367-7830

4730-14-040-0116
Raccord Equipe

140400116
0249877350: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-387-0500
Tube Union

143870500
RBF03245: RNCC: 3 | RNVC: 2
D543-1-4: RNCC: 3 | RNVC: 2
8202407: RNCC: 5 | RNVC: 9

24 Aug 1983

4730-14-426-7934
Tube Tee

144267934
4730HEING139,7X6,3-48,3X2,6: RNCC: 2 | RNVC: 2

22 Sep 1988

4730-14-278-5627
Fond Raccord

142785627
1-97632: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-305-1823

4730-14-566-9408
Quick Disconnect Coupling Half

145669408
HA 05043 EO: RNCC: 3 | RNVC: 2
A231004000468: RNCC: 5 | RNVC: 2

18 Jan 2011

4730-14-394-4532
Quick Disconnect Coupling Half

143944532
SM08808AU0023: RNCC: 3 | RNVC: 2
SOM88-0 1-2: RNCC: 5 | RNVC: 2
SOM88-08: RNCC: 5 | RNVC: 2
SOM88-08-01: RNCC: 5 | RNVC: 2
SOM88-08-23: RNCC: 5 | RNVC: 2

28 Aug 1984

4730-14-504-9054
Pipeline Flexible Spacer

145049054
DILATOFLEX-K-GZ-DN250PN16-CERCLE: RNCC: 3 | RNVC: 2
GR1/250/KR320-WG/P/ANNEAU VIDE: RNCC: 3 | RNVC: 2
ERV-JAUNE-DN250PN16-VSD: RNCC: 3 | RNVC: 9

11 Mar 1998

4730-14-041-2576
Tube Union

140412576
1204-14-12X17CYL: RNCC: 3 | RNVC: 2
222455: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-366-4900
Tube Tee

143664900
1TR25X30X25: RNCC: 3 | RNVC: 2
TRA25X30X25: RNCC: 3 | RNVC: 2
10RA25X30X25: RNCC: 3 | RNVC: 2

20 Nov 1980

4730-14-322-0534
Fluid Pressure Line Multiple Connector

143220534
001078282P: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-372-4625
Tube Coupling

143724625
CR81R21ACIER: RNCC: 3 | RNVC: 2

1 Sep 1981

4730-14-316-2581
Bulkhead Hose Connector

143162581
0210160020: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-528-3601
Quick Disconnect Coupling Half

145283601
8007401094: RNCC: 3 | RNVC: 2

23 Jan 2002

4730-14-432-6494
Quick Disconnect Plug

144326494
1090-819: RNCC: 3 | RNVC: 2

19 Jun 1989

4730-14-374-3997
Threaded Tube Fitting Plug

143743997
7759: RNCC: 3 | RNVC: 9

8 Dec 1981

4730-14-400-2465
Tube Tee

144002465
0000366610: RNCC: 3 | RNVC: 2

24 Apr 1985

4730-14-529-8774
Tube Coupling Inverted Nut

145298774
520229: RNCC: 3 | RNVC: 2

17 Apr 2002

4730-14-500-3967
Hose To Boss Straight Adapter

145003967
E63102000010: RNCC: 3 | RNVC: 2
F300 0T 024 4068: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-529-0582
Fluid Pressure Line Multiple Connector

145290582
10249544: RNCC: 3 | RNVC: 2

6 Mar 2002

4730-14-323-1707
Pipeline Flexible Spacer

143231707
DILAT0FLEXNT65HH: RNCC: 3 | RNVC: 9

1 Jan 1975

4730-14-470-2798
Sediment Strainer Element

144702798
BSNGCGF004F22A: RNCC: 3 | RNVC: 2
BSNGCGF005F22A: RNCC: 5 | RNVC: 2
BSNGCGF006F22A: RNCC: 5 | RNVC: 2
BSNGCGF009F15A: RNCC: 5 | RNVC: 2

14 Jun 1994

4730-14-452-3077
Drain Extension Tube

144523077
ST406M11P57: RNCC: 3 | RNVC: 2

8 Jan 1992

4730-14-344-1016
Pipe Flange

143441016
7068F30UE8: RNCC: 2 | RNVC: 2

13 Jul 1977

4730-14-488-8632
Hose To Boss Straight Adapter

144888632
E4750341: RNCC: 3 | RNVC: 9

10 Jun 1997

4730-14-286-3090
Tu Droit Adaptateur

4730-14-533-4847
Tube To Boss Straight Adapter

145334847
2384: RNCC: 3 | RNVC: 2

5 Feb 2003

4730-14-369-8926
Hose Coupling Assembly

143698926
9945605: RNCC: 3 | RNVC: 2

18 May 1981

4730-14-487-5465
Tube To Boss Straight Adapter

144875465
RA1M506206063: RNCC: 3 | RNVC: 2

10 Apr 1997

4730-14-550-5344
Self-Sealing Coupling Half

145505344
095118: RNCC: 3 | RNVC: 2
95118: RNCC: 5 | RNVC: 2
095118: RNCC: 5 | RNVC: 2

22 Jun 2006

4730-14-270-5034

4730-14-518-8471
Pipeline Flexible Spacer

145188471
C0101: RNCC: 3 | RNVC: 2

23 Feb 2000

4730-14-432-9564
Tube Tee

144329564
543711: RNCC: 3 | RNVC: 2

5 Jul 1989

4730-14-539-8727
Tube Coupling

145398727
1424H2: RNCC: 3 | RNVC: 2

16 Feb 2004

4730-14-513-2825
Fluid Pressure Line Multiple Connector

145132825
GSM1934DET31: RNCC: 3 | RNVC: 2

10 Mar 1999

4730-14-408-4455
Tube To Boss Straight Adapter

144084455
LW110-NS3033S: RNCC: 3 | RNVC: 2
84013091NU: RNCC: 5 | RNVC: 2

27 Mar 1986

4730-14-335-7348
Tube To Boss Straight Adapter

143357348
128360: RNCC: 3 | RNVC: 9

30 Jun 1976

4730-14-309-7186
Tube To Boss Straight Adapter

143097186
A77465: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-438-1741
Bulkhead Hose Connector

144381741
DA2C205533910: RNCC: 3 | RNVC: 2

7 Mar 1990

4730-14-539-8719
Tube Coupling

145398719
5000261511: RNCC: 3 | RNVC: 2

16 Feb 2004

4730-14-427-0330
Pipe Flange

144270330
MAT162-0022DN80MALE: RNCC: 3 | RNVC: 2
MAT162-0022F11: RNCC: 3 | RNVC: 2

5 Oct 1988

4730-14-363-0456
Sediment Strainer Body

143630456
674-080235: RNCC: 3 | RNVC: 2
PUR674-080235: RNCC: 5 | RNVC: 9

3 Apr 1980

4730-14-563-7614
Tube Reducer

145637614
GR15/12LCFX: RNCC: 3 | RNVC: 2
A231004000456: RNCC: 5 | RNVC: 2

11 Mar 2010

4730-14-334-2532
Tube Tee

143342532
GSM163-017F30: RNCC: 3 | RNVC: 2
GSM163-17F30: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-504-0630
Tube Coupling

145040630
NNP4730878750173: RNCC: 3 | RNVC: 2

5 Feb 1998

4730-14-436-8469
Hose Coupling Assembly

144368469
DA2C729001800A1: RNCC: 3 | RNVC: 2

3 Jan 1990

4730-14-484-6252
Tube Coupling

144846252
0107062000: RNCC: 3 | RNVC: 2
91769945: RNCC: 5 | RNVC: 2

28 Nov 1996

4730-14-328-4867
Bulkhead Hose Connector

143284867
D4682: RNCC: 3 | RNVC: 2
D4682: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-424-9708
Tube To Boss Straight Adapter

144249708
AS16SA3C: RNCC: 3 | RNVC: 2
AS16SA3C: RNCC: 3 | RNVC: 9
RAR1401: RNCC: 5 | RNVC: 2
AS16PS: RNCC: 5 | RNVC: 9

16 Jun 1988

4730-14-544-6224
Tube To Boss Straight Adapter

145446224
0120752007: RNCC: 3 | RNVC: 2
071338016000000: RNCC: 5 | RNVC: 2

14 Feb 2005

4730-14-205-0423

4730-14-445-5674
Ebauchetepourtuyau

144455674
TEDIA13,5-1,6: RNCC: 3 | RNVC: 2

18 Feb 1991

4730-14-409-3424
Embout Equipe

144093424
969828: RNCC: 3 | RNVC: 2
969828: RNCC: 5 | RNVC: 9

28 May 1986

4730-14-330-9810
Coude Pour Tuyau

4730-14-330-9826
Coude Pour Tube

4730-14-338-2566
Graisseur Allonge

143382566
5011200-10X100: RNCC: 3 | RNVC: 2
ALG5011200-10X100: RNCC: 5 | RNVC: 9

6 Nov 1976

4730-14-316-7013
Tube To Boss Straight Adapter

143167013
A70-73934: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-431-1568
Pipe Flange

144311568
6784-1DT38A: RNCC: 3 | RNVC: 9

10 Apr 1989

4730-14-418-3555
Quick Disconnect Coupling Half

144183555
RBE11-7103-6: RNCC: 3 | RNVC: 2
RBE11-7103-60D: RNCC: 5 | RNVC: 2

12 Aug 1987

4730-14-333-3489
Tube To Boss Straight Adapter

143333489
PA356-119M42P124: RNCC: 3 | RNVC: 9

2 Jul 1975

4730-14-555-0835
Tube To Hose Straight Adapter

145550835
329-93-110: RNCC: 3 | RNVC: 2

27 Sep 2007

4730-14-316-5116
Bulkhead Hose Connector

143165116
321A08-0510-75: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-462-8000
Threaded Tube Fitting Plug

144628000
43-20-09-1: RNCC: 3 | RNVC: 2

30 Apr 1993

4730-14-325-6312
Fluid Pressure Line Multiple Connector

143256312
121E77-217-00-0M2: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-391-6492
Quick Disconnect Coupling Half

143916492
RBE11-21020D: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-467-3069
Tube Tee

144673069
SSNGA5S109-A-REP57: RNCC: 3 | RNVC: 2
13506-2REP57: RNCC: 3 | RNVC: 2

5 Jan 1994

4730-14-516-8455
Tube Union

145168455
F3BA8-5-12-1-2: RNCC: 3 | RNVC: 2

20 Oct 1999

4730-14-259-2507
Olive Pour Tuyau

142592507
0730-0001: RNCC: 3 | RNVC: 2
7001-1014: RNCC: 5 | RNVC: 2
SAF0730-0001: RNCC: 5 | RNVC: 9

1 Jan 1969

4730-14-410-3290
Support Filtre Flui

144103290
341A76-5092-20: RNCC: 3 | RNVC: 2

18 Jun 1986

4730-14-406-0173
Quick Disconnect Coupling Half

144060173
E29573MALE26X34: RNCC: 2 | RNVC: 2
208-01956-00: RNCC: 3 | RNVC: 2

7 Jan 1986

4730-14-259-7280
Raccord Orientable

142597280
ES109-57TF: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-219-0801
Clapet De Decharge

142190801
NO PRIMARY REF14-219-0801: RNCC: 3 | RNVC: 2
AH029-00: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-440-6224
Tube To Boss Straight Adapter

144406224
UMSI8-14X150: RNCC: 3 | RNVC: 9
91710128: RNCC: 5 | RNVC: 2

18 Jul 1990

4730-14-415-4652
Tube Tee

144154652
F0532S4710X0002-3715: RNCC: 3 | RNVC: 2
TA25NNU: RNCC: 3 | RNVC: 2
10A25NU: RNCC: 3 | RNVC: 2
121136NU: RNCC: 5 | RNVC: 2
17-25NNNU: RNCC: 5 | RNVC: 2
89301536: RNCC: 5 | RNVC: 2
S4710X0002-3715: RNCC: 5 | RNVC: 9

18 May 1987

4730-14-495-6349
Tube Union

144956349
C50375-54: RNCC: 3 | RNVC: 2
F300 0T 019 5629: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-491-0446
Hose To Boss Straight Adapter

144910446
79021522: RNCC: 3 | RNVC: 2
F300 0T 001 1849: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-213-8426
Sediment Strainer Element

142138426
223958: RNCC: 3 | RNVC: 2
223958: RNCC: 5 | RNVC: 2
223958: RNCC: 5 | RNVC: 9
223958: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-273-5070
Tube To Boss Straight Adapter

142735070
7062BA1RCET1-8UA9: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-543-8628
Tube To Boss Straight Adapter

145438628
4216000010: RNCC: 3 | RNVC: 2

14 Dec 2004

4730-14-506-1938
Threaded Tube Fitting Plug

145061938
L043: RNCC: 3 | RNVC: 2
RAQ0330: RNCC: 5 | RNVC: 2

9 Apr 1998

4730-14-386-9908
Tube Tee

143869908
01080813: RNCC: 3 | RNVC: 2
91552277: RNCC: 5 | RNVC: 2

24 Aug 1983

4730-14-511-1890
Fluid Flow Restrictor

145111890
GA66005: RNCC: 3 | RNVC: 2

9 Dec 1998

4730-14-307-0429
Fluid Passage Bolt

143070429
5156144400: RNCC: 3 | RNVC: 2
561444: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-358-5994
Bulkhead Hose Connector

143585994
413191: RNCC: 3 | RNVC: 2

7 Sep 1979

4730-14-387-3551
Bulkhead Hose Connector

143873551
DA2C721263: RNCC: 3 | RNVC: 2

15 Sep 1983

4730-14-454-4139
Tube To Gas Fitting Straight Adapter

144544139
15726: RNCC: 3 | RNVC: 2
RAR1520: RNCC: 5 | RNVC: 2

2 Apr 1992

4730-14-317-3432
Pipe Flange

143173432
0210090630: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-313-4847
Sediment Strainer Body

143134847
401MA0390F4: RNCC: 3 | RNVC: 2
401MA399F4: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-476-5921
Embout Male

144765921
172280: RNCC: 3 | RNVC: 2

21 Jun 1995

4730-14-560-5018
Tube Coupling

145605018
3640872: RNCC: 3 | RNVC: 2
FS0003100: RNCC: 6 | RNVC: 9

24 Apr 2009

4730-14-390-9114
Sediment Strainer Element

143909114
P1054: RNCC: 3 | RNVC: 2
8953: RNCC: 5 | RNVC: 2

29 Feb 1984

4730-14-552-8302
Fluid Pressure Line Multiple Connector

145528302
WH06ZLMKDSA3C: RNCC: 3 | RNVC: 2
437401: RNCC: 5 | RNVC: 2
WH06ZLMKDSA3C: RNCC: 5 | RNVC: 9

6 Feb 2007

4730-14-563-6010
Tube To Hose Straight Adapter

145636010
05D110: RNCC: 3 | RNVC: 2

24 Feb 2010

4730-14-347-1036

4730-14-216-1442

4730-14-560-2765
Tube Elbow

145602765
Z1837032: RNCC: 3 | RNVC: 2
CV149900: RNCC: 5 | RNVC: 2
Z1837032: RNCC: 5 | RNVC: 2

7 Apr 2009

4730-14-366-6034

4730-14-366-5905

4730-14-428-5849
Raccord Buse

144285849
SBE1035: RNCC: 3 | RNVC: 2

8 Dec 1988

4730-14-304-8055
Bulkhead Hose Connector

143048055
300774P: RNCC: 3 | RNVC: 2
300774P: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-505-6972
Return Tube Bend

145056972
A49852: RNCC: 3 | RNVC: 2

26 Mar 1998

4730-14-419-7836
Tube To Boss Straight Adapter

144197836
160H712204-162: RNCC: 3 | RNVC: 2

5 Nov 1987

4730-14-430-4393
Quick Disconnect Coupling Half

144304393
444044: RNCC: 3 | RNVC: 2

22 Mar 1989

4730-14-505-0340
Tube To Boss Straight Adapter

145050340
106102091: RNCC: 3 | RNVC: 2
5005130066: RNCC: 5 | RNVC: 2

11 Mar 1998

4730-14-423-1864
Tube-Hose Fitting Compression Sleeve

144231864
A31371: RNCC: 3 | RNVC: 2

7 Apr 1988

4730-14-406-1104
Tube To Boss Straight Adapter

144061104
32009: RNCC: 3 | RNVC: 2

8 Jan 1986

4730-14-434-6980
Adaptateur Bride

144346980
BN329515D2DN50INOX: RNCC: 3 | RNVC: 2

2 Oct 1989

4730-14-372-9364
Fluid Pressure Line Multiple Connector

143729364
MD6: RNCC: 3 | RNVC: 2

21 Sep 1981

4730-14-507-4122
Tube Tee

145074122
LL300CS10L: RNCC: 3 | RNVC: 2

6 Jul 1998

4730-14-468-4861
Tube Coupling

144684861
A72816: RNCC: 3 | RNVC: 2

3 Mar 1994

4730-14-351-8057
Tube Fitting Clinch Sleeve

143518057
9924480202: RNCC: 3 | RNVC: 2

12 Sep 1978

4730-14-300-5635
Sediment Strainer Element

143005635
704835: RNCC: 3 | RNVC: 2
704835: RNCC: 5 | RNVC: 2
704835: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-429-5395
Quick Disconnect Coupling Half

144295395
HY050200: RNCC: 3 | RNVC: 2

30 Jan 1989

4730-14-542-2586
Hose To Grooved Clamp Coupling Straight Adapter

145422586
914035123: RNCC: 3 | RNVC: 2

8 Jul 2004

4730-14-205-0549
Tube Coupling Inverted Nut

142050549
R5404: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-236-0999
Fluid Pressure Line Multiple Connector

142360999
410755: RNCC: 3 | RNVC: 2
410755: RNCC: 5 | RNVC: 2
410755: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-423-9040
Fluid Pressure Line Multiple Connector

144239040
717517: RNCC: 3 | RNVC: 2

5 May 1988

4730-14-449-7292
Pipe Elbow Assembly

144497292
721B927: RNCC: 3 | RNVC: 2
89232738: RNCC: 5 | RNVC: 2

4 Sep 1991

4730-14-385-2232
Fluid Pressure Line Multiple Connector

143852232
9418202158: RNCC: 3 | RNVC: 2

26 Jul 1983

4730-14-287-7345
Pipe Flange

142877345
27304550J: RNCC: 3 | RNVC: 2
130455: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-558-1487
Hose To Boss Tee

145581487
74541: RNCC: 3 | RNVC: 2

8 Sep 2008

4730-14-567-8013
Tube Outlet

145678013
M8743111900000: RNCC: 3 | RNVC: 2

12 Apr 2011

4730-14-255-3158

4730-14-203-6474
Raccord Vabco

142036474
UA20: RNCC: 3 | RNVC: 2

1 Jan 1963

4730-14-218-2932

4730-14-203-6517

4730-14-294-7967

4730-14-289-9574
Raccord Special

142899574
02134002600: RNCC: 3 | RNVC: 2
021340026: RNCC: 5 | RNVC: 2
412477: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-203-6500

4730-14-416-7418
Tube Tee

144167418
P4-17-14NU: RNCC: 3 | RNVC: 2

25 Jun 1987

4730-14-501-4422
Hydraulic Manifold Assembly

145014422
438367: RNCC: 3 | RNVC: 2
438367-001: RNCC: 5 | RNVC: 9

29 Oct 1997

4730-14-337-3995
Tube Fitting Clinch Sleeve

143373995
AACE4MP56-01-11: RNCC: 3 | RNVC: 2
85-688-4859: RNCC: 6 | RNVC: 9

7 Oct 1976

4730-14-267-3934
Tube To Boss Swivel Joint

142673934
611-18-90EJBR: RNCC: 3 | RNVC: 2
9567141802: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-357-5584
Tube To Boss Straight Adapter

143575584
1DM10-12-17C0: RNCC: 3 | RNVC: 2
91355526: RNCC: 5 | RNVC: 2
91355526: RNCC: 5 | RNVC: 9
91355526: RNCC: 5 | RNVC: 9

7 Jun 1979

4730-14-571-0111
Non-Metallic Connecting Sleeve

145710111
390-100-125: RNCC: 3 | RNVC: 2

10 Feb 2012

4730-14-559-2481
Tube Coupling

145592481
355A32-2105-22: RNCC: 3 | RNVC: 2

16 Dec 2008

4730-14-261-8165
Bouchon Special

142618165
24110010100: RNCC: 3 | RNVC: 2
110J101: RNCC: 5 | RNVC: 9
241100101: RNCC: 5 | RNVC: 9
601116: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-456-5431
Tube Coupling

144565431
16016490D: RNCC: 3 | RNVC: 2
R48993: RNCC: 5 | RNVC: 2

8 Jul 1992

4730-14-543-7360
Lubrication Fitting

145437360
1000005397: RNCC: 3 | RNVC: 2

8 Dec 2004

4730-14-395-3093
Pipeline Flexible Spacer

143953093
KLEDIL20GZ: RNCC: 3 | RNVC: 2
KLEDIL20GZ: RNCC: 5 | RNVC: 9

2 Oct 1984

4730-14-542-7066
Tube Coupling

145427066
473110812: RNCC: 3 | RNVC: 2

28 Jul 2004

Load More Results