What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 92 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 92 of 185

4730-14-335-6062
Quick Disconnect Coupling Half

143356062
10-43677M1: RNCC: 3 | RNVC: 2

30 Jun 1976

4730-14-250-9546
Fluid Pressure Line Multiple Connector

142509546
80522: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-388-4931
Tube To Boss Straight Adapter

143884931
125783: RNCC: 3 | RNVC: 9

3 Nov 1983

4730-14-418-2220
Fuel Feeder Manifold

144182220
0319777450: RNCC: 3 | RNVC: 2

6 Aug 1987

4730-14-519-0487
Quick Disconnect Coupling Half

145190487
117E4120LTAJ: RNCC: 3 | RNVC: 2

2 Mar 2000

4730-14-544-7531
Self-Sealing Coupling Assembly

145447531
P763108: RNCC: 3 | RNVC: 2
4KK163: RNCC: 5 | RNVC: 2

22 Feb 2005

4730-14-491-0432
Tube To Boss Straight Adapter

144910432
79020884: RNCC: 3 | RNVC: 2
F300 0T 001 1830: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-555-0550
Hose To Gas Fitting Straight Adapter

145550550
M4ZS460D8375A: RNCC: 3 | RNVC: 2

25 Sep 2007

4730-14-553-4806
Pipe Flange

145534806
0319727500: RNCC: 3 | RNVC: 2

5 Apr 2007

4730-14-525-7681
Lubrication Fitting

145257681
353051S: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-378-6498
Tube To Boss Straight Adapter

143786498
8401161766: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-350-4120
Pipe Flange

143504120
214286: RNCC: 3 | RNVC: 2

12 Jul 1978

4730-14-509-1398
Return Tube Bend

145091398
3766P053: RNCC: 3 | RNVC: 2

21 Oct 1998

4730-14-443-3748
Tube Tee

144433748
JBRAB20: RNCC: 3 | RNVC: 2
JBRAB20: RNCC: 3 | RNVC: 9

20 Nov 1990

4730-14-443-3970
Fluid Flow Restrictor Unit

144433970
021300790: RNCC: 3 | RNVC: 2

21 Nov 1990

4730-14-431-8008
Tube Coupling Inverted Nut

144318008
SRC0400701: RNCC: 3 | RNVC: 2

10 May 1989

4730-14-210-0361
Fluid Pressure Line Multiple Connector

142100361
109-14NN: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-291-3964
Fluid Pressure Line Multiple Connector

142913964
0235227380: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-503-4922
Bulkhead Hose Connector

145034922
RBF03212: RNCC: 3 | RNVC: 2
8202085: RNCC: 5 | RNVC: 2

14 Jan 1998

4730-14-396-2347
Fluid Pressure Line Multiple Connector

143962347
89980613: RNCC: 3 | RNVC: 2

27 Nov 1984

4730-14-530-7604
Pipe To Hose Straight Adapter

145307604
839127050: RNCC: 3 | RNVC: 2

3 Jul 2002

4730-14-549-4490
Quick Disconnect Coupling Half

145494490
RBE067102IAHP: RNCC: 3 | RNVC: 2
RBE067102IAHP: RNCC: 5 | RNVC: 2

5 Apr 2006

4730-14-347-6376
Tube Coupling

143476376
0-3751SF32A: RNCC: 3 | RNVC: 2
0-3751SF32A: RNCC: 5 | RNVC: 9

1 Mar 1978

4730-14-319-5682
Raccord Trois Piece

143195682
331GC12 1-2: RNCC: 3 | RNVC: 9

1 Jan 1975

4730-14-268-6415

4730-14-437-3904
Hose To Gas Fitting Straight Adapter

144373904
01201213: RNCC: 3 | RNVC: 2

31 Jan 1990

4730-14-329-2815
Pipeline Flexible Spacer

143292815
I131NTE300MAR: RNCC: 2 | RNVC: 2
DILNTE300MAR: RNCC: 3 | RNVC: 9

2 Jul 1975

4730-14-503-1857
Bulkhead Hose Connector

145031857
RA1M592005191: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-398-6669
Tube To Hose Straight Adapter

143986669
01051521: RNCC: 3 | RNVC: 2
293-6709: RNCC: 5 | RNVC: 2

31 Jan 1985

4730-14-440-4225
Bulkhead Hose Connector

144404225
DA2C814201: RNCC: 3 | RNVC: 2

11 Jul 1990

4730-14-317-8073
Tube Coupling Assembly

143178073
3951R32X16X32A: RNCC: 3 | RNVC: 2
3951R32X16X32A: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-491-7069
Tube To Boss Swivel Joint

144917069
008569446: RNCC: 3 | RNVC: 9
F300 0T 003 9890: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-368-1691
Tube To Boss Straight Adapter

143681691
00 111 06 06: RNCC: 3 | RNVC: 2
4741-6-6: RNCC: 5 | RNVC: 9

20 Feb 1981

4730-14-488-4145
Racc A Sertir Bague

4730-14-345-1348
Fluid Pressure Line Multiple Connector

143451348
103105160101: RNCC: 3 | RNVC: 2
103105160101: RNCC: 5 | RNVC: 2

5 Oct 1977

4730-14-497-9672
Quick Disconnect Coupling Half

144979672
KU1310SEB00225: RNCC: 3 | RNVC: 2
29513015: RNCC: 5 | RNVC: 2
91566804: RNCC: 5 | RNVC: 2
DAHKU1310SEB00225: RNCC: 5 | RNVC: 9

29 Oct 1997

4730-14-425-8242
Quick Disconnect Coupling Half

144258242
9016CPV508131: RNCC: 3 | RNVC: 2

21 Jul 1988

4730-14-541-8596
Fluid Strainer Cover

145418596
10670519: RNCC: 3 | RNVC: 2

26 Jun 2004

4730-14-397-4776
Tube To Gas Fitting Straight Adapter

143974776
1202234: RNCC: 3 | RNVC: 2

14 Dec 1984

4730-14-439-7319
Tube To Boss Straight Adapter

144397319
01011275: RNCC: 3 | RNVC: 2

21 May 1990

4730-14-226-9958
Fluid Pressure Line Multiple Connector

142269958
0000300250: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-542-2045
Fluid-Emulsion Spray Nozzle

145422045
510754408: RNCC: 3 | RNVC: 2
510754408: RNCC: 5 | RNVC: 9

8 Jul 2004

4730-14-542-2049
Fluid-Emulsion Spray Nozzle

145422049
511059208: RNCC: 3 | RNVC: 2
511059208: RNCC: 5 | RNVC: 9

8 Jul 2004

4730-14-552-9616
Drainage Pipe Coupling

145529616
63D06604: RNCC: 3 | RNVC: 2
63D06604: RNCC: 5 | RNVC: 2

19 Feb 2007

4730-14-392-5532
Fuel Feeder Manifold

143925532
0268987090: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-462-4042
Fluid Passage Bolt

144624042
800558: RNCC: 3 | RNVC: 2

15 Apr 1993

4730-14-389-9788
Tube To Boss Straight Adapter

143899788
065U20-719799D: RNCC: 3 | RNVC: 2

26 Jan 1984

4730-14-329-4252
Pipe Flange

143294252
500198B: RNCC: 3 | RNVC: 2
500198: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-395-3721
Tube Tee

143953721
N0117F36A: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-332-6663
Tube Fitting Brazing Ferrule

143326663
45414: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-501-7145
Tube To Boss Straight Adapter

145017145
84800000103159B: RNCC: 3 | RNVC: 2

5 Nov 1997

4730-14-372-3044
Tube To Boss Straight Adapter

143723044
VDP7566: RNCC: 3 | RNVC: 2

1 Sep 1981

4730-14-434-9010
Flange To Hose Straight Adapter

144349010
BN324575BF5DN80: RNCC: 3 | RNVC: 2
RAR1436: RNCC: 5 | RNVC: 2

9 Oct 1989

4730-14-319-5508
Tube To Boss Straight Adapter

143195508
HM44122: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-313-7614
Tube To Boss Straight Adapter

143137614
0210160110: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-414-5097
Tube To Boss Straight Adapter

144145097
8405162266NU: RNCC: 3 | RNVC: 2

5 Feb 1987

4730-14-551-6081
Fluid Pressure Line Multiple Connector

145516081
719002: RNCC: 3 | RNVC: 2

9 Oct 2006

4730-14-331-6685

4730-14-231-4283
Fluid Passage Bolt

142314283
80-2582-01A: RNCC: 3 | RNVC: 9
802582: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-421-7751
Tube Tee

144217751
1809-8-12X125NN: RNCC: 3 | RNVC: 2
1809-8-12-12125: RNCC: 5 | RNVC: 9

27 Jan 1988

4730-14-423-4724
Pipe Flange

144234724
UA50088006PN50-11LSFDN20: RNCC: 2 | RNVC: 2
4730HCPN50DN02011LSF: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-485-0749
Self-Sealing Coupling Assembly

144850749
332A55-0025-0088: RNCC: 3 | RNVC: 2

19 Dec 1996

4730-14-556-2237
Tube Coupling

145562237
355R69-0101-08: RNCC: 3 | RNVC: 2

13 Feb 2008

4730-14-358-8427
Swivel Flange To Hose Connector

143588427
125-08B: RNCC: 3 | RNVC: 2

7 Sep 1979

4730-14-564-5865
Inflating Air Chuck

145645865
252304763-01: RNCC: 3 | RNVC: 2
B009613: RNCC: 5 | RNVC: 2

10 May 2010

4730-14-222-6525
Tube Fitting Brazing Ferrule

142226525
GSM1297F1AF1BTABLEAU1D1-20I16: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-350-8705
Piece De Raccordeme

143508705
GSM166-017F36: RNCC: 3 | RNVC: 2
GSM166-17F36: RNCC: 5 | RNVC: 2

12 Jul 1978

4730-14-032-1591
Contre Bride

140321591
CMT30E9030AF5ET6DE48-3REP3: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-434-7116
Adaptateur Bride

144347116
BN329515C2DN20AC: RNCC: 3 | RNVC: 2

2 Oct 1989

4730-14-225-0041
Ecrou Raccord Molet

142250041
B22480: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-278-1808

4730-14-316-7222

4730-14-456-6885
Pipe Flange

144566885
FL250: RNCC: 3 | RNVC: 2

23 Jul 1992

4730-14-555-8686
Drainage Pipe Coupling

145558686
0301031160: RNCC: 3 | RNVC: 2

20 Dec 2007

4730-14-456-6601
Lubrication Fitting

144566601
5020010M8X125: RNCC: 3 | RNVC: 2
RAR1543: RNCC: 5 | RNVC: 2
ALG5020010M8X125: RNCC: 5 | RNVC: 9

18 Jul 1992

4730-14-315-1702
Lubricant Pressure Relief Fitting

143151702
0210060040: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-403-3124
Anchor And Reinforcement Pipe Clamp

144033124
EDM0558: RNCC: 3 | RNVC: 2
96060237: RNCC: 5 | RNVC: 2

21 Aug 1985

4730-14-537-8417
Quick Disconnect Coupling Assembly

145378417
622102: RNCC: 3 | RNVC: 2

27 Nov 2003

4730-14-032-1533
Pipe Flange

140321533
CMT30E9030AF3DE25REP3: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-279-5787
Sediment Strainer Element

142795787
903615A: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-436-8425
Hose Coupling Assembly

144368425
DA2C500052200: RNCC: 3 | RNVC: 2

3 Jan 1990

4730-14-519-5867
Quick-Disconnect Nipple

145195867
AE87347G: RNCC: 3 | RNVC: 2

22 Mar 2000

4730-14-460-9185
Tube To Boss Straight Adapter

144609185
TB4011302: RNCC: 3 | RNVC: 2

16 Feb 1993

4730-14-430-8932
Fluid Pressure Line Multiple Connector

144308932
9943100600: RNCC: 3 | RNVC: 2

29 Mar 1989

4730-14-474-9726
Pressure Plug Retention Cap

144749726
CR455751: RNCC: 3 | RNVC: 2
455751: RNCC: 5 | RNVC: 2

16 Mar 1995

4730-14-335-7647
Tube Tee

143357647
R10X16X10: RNCC: 3 | RNVC: 2

30 Jun 1976

4730-14-523-0566
Flange To Tube Straight Adapter

145230566
29571: RNCC: 3 | RNVC: 2

20 Dec 2000

4730-14-432-9568
Tube Tee

144329568
545403: RNCC: 3 | RNVC: 2

5 Jul 1989

4730-14-270-9672
Tube Fitting Flared Sleeve

142709672
373600: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-355-5321
Tube Coupling Assembly

143555321
3601SB32A: RNCC: 3 | RNVC: 2
3601SB32A: RNCC: 5 | RNVC: 9

19 Mar 1979

4730-14-308-6299
Fluid Passage Bolt

143086299
0000280280: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-441-0336
Hose To Boss Straight Adapter

144410336
007607010P: RNCC: 3 | RNVC: 2

14 Aug 1990

4730-14-395-3728
Tube Tee

143953728
N0189F11A: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-382-8719
Tube To Boss Straight Adapter

143828719
PE60801H14: RNCC: 3 | RNVC: 2

26 Jul 2000

4730-14-229-2229
Fluid Passage Bolt

142292229
273860: RNCC: 3 | RNVC: 2
273860: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-502-8727
Lubricant Pressure Relief Fitting

145028727
9T0704: RNCC: 3 | RNVC: 2

17 Dec 1997

4730-14-382-5670
Pipe Flange

143825670
20068463: RNCC: 3 | RNVC: 2
20068463: RNCC: 5 | RNVC: 9

17 Feb 1983

4730-14-296-9479
Raccord Retour Huil

142969479
176897: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-326-2632

4730-14-291-1373

4730-14-344-5152

4730-14-483-2098
Tubulure Apres Sepa

144832098
AS34TA51F6D-REP2: RNCC: 3 | RNVC: 2

27 Aug 1996

4730-14-411-5470
Bloc Liaison

144115470
0A2747: RNCC: 3 | RNVC: 2

20 Aug 1986

4730-14-269-2007

4730-14-335-1878

4730-14-444-5428
Tube Union

144445428
F85BAB8M16: RNCC: 3 | RNVC: 9
A05050235: RNCC: 5 | RNVC: 2
A05050235: RNCC: 5 | RNVC: 9

15 Jan 1991

4730-14-494-5898
Graisseur

144945898
802 306 153: RNCC: 3 | RNVC: 2
F300 0T 017 5162: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-564-5889
Hose Tee

145645889
A210602000107: RNCC: 3 | RNVC: 2
732809: RNCC: 5 | RNVC: 2

10 May 2010

4730-14-500-7312
Return Tube Bend

145007312
10048078: RNCC: 3 | RNVC: 2
F300 0T 024 7508: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-566-0048
Boss Tee

145660048
893 501 794 4: RNCC: 3 | RNVC: 2
A231004000115: RNCC: 5 | RNVC: 2

11 Oct 2010

4730-14-385-7102
Tube Union

143857102
341GC16 3-4: RNCC: 3 | RNVC: 9

26 Jul 1983

4730-14-306-7691
Bride A Zinc

143067691
000MA0781F5REP1DN80: RNCC: 3 | RNVC: 2
000MA781F5REP1DN80: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-443-4653
Tube To Boss Straight Adapter

144434653
2-096333-2B: RNCC: 3 | RNVC: 2
2-096333-2B: RNCC: 5 | RNVC: 9

23 Nov 1990

4730-14-560-0882
Hose Nipple

145600882
16531: RNCC: 3 | RNVC: 2
67919: RNCC: 5 | RNVC: 2

23 Mar 2009

4730-14-260-9340

4730-14-367-7751

4730-14-338-0836

4730-14-317-2591
Self-Sealing Coupling Assembly

143172591
RBE6-2806-0DIAWVDFB: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-539-6550
Tube Tee

145396550
21237457-00: RNCC: 3 | RNVC: 2
21237457-7: RNCC: 5 | RNVC: 2

28 Jan 2004

4730-14-460-2408
Pipe Expansion Joint

144602408
76042803800: RNCC: 3 | RNVC: 2
156611-01: RNCC: 5 | RNVC: 2

19 Jan 1993

4730-14-416-3307
Pipe Flange

144163307
E29203-01A-PN16DN25Z3CND18-12: RNCC: 2 | RNVC: 2
E29203-01A-PN16DN25Z2CND17-12: RNCC: 5 | RNVC: 2
4730JEDN025: RNCC: 5 | RNVC: 2

3 Jun 1987

4730-14-571-9815
Tube Elbow

145719815
330A75181306: RNCC: 3 | RNVC: 2
330A75-1813-06: RNCC: 5 | RNVC: 2

30 May 2012

4730-14-569-5563
Filler Cap Adapter Assembly

145695563
T180130003: RNCC: 3 | RNVC: 2
LK0000005727-REP12: RNCC: 5 | RNVC: 2
09Y2000R01DZ001-REP12: RNCC: 5 | RNVC: 2
T18-0130-003: RNCC: 5 | RNVC: 2

27 Sep 2011

4730-14-209-3201
Raccord Coude Speci

142093201
0000337020: RNCC: 3 | RNVC: 2
000-33-702: RNCC: 5 | RNVC: 2
057-63-706: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-365-9365

4730-14-403-4390
Tube To Boss Straight Adapter

144034390
01010660NU: RNCC: 3 | RNVC: 2
1010660NU: RNCC: 5 | RNVC: 2

21 Aug 1985

4730-14-302-3001
Tube To Boss Straight Adapter

143023001
000565282P: RNCC: 3 | RNVC: 2
0UT1-139: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-231-9969

4730-14-338-3349

4730-14-345-4173

4730-14-295-0280
Diaphragme Special

142950280
H34TS3A: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-507-8736
Filler Cap Adapter Assembly

145078736
47135672: RNCC: 3 | RNVC: 2

20 Aug 1998

4730-14-375-4060
Tube To Boss Straight Adapter

143754060
A74924: RNCC: 3 | RNVC: 2

26 Feb 1982

4730-14-323-4853
Lubricant Pressure Relief Fitting

143234853
0210090020: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-539-6969
Pipeline Flexible Spacer

145396969
21E8185: RNCC: 3 | RNVC: 9

2 Feb 2004

4730-14-389-1974
Fluid Pressure Line Multiple Connector

143891974
CG2070699623: RNCC: 3 | RNVC: 2

29 Nov 1983

4730-14-488-2290
Hose To Boss Straight Adapter

144882290
01911013: RNCC: 3 | RNVC: 2

23 Apr 1997

4730-14-219-4178
Tube Coupling Assembly

142194178
R2112: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-504-3081
Tube-Pipe Fitting Kit

145043081
3701631M92: RNCC: 3 | RNVC: 2

11 Feb 1998

4730-14-318-3312

4730-14-313-9793

4730-14-322-9241

4730-14-420-1302
Fluid Pressure Line Multiple Connector

144201302
DA1N726200111U1: RNCC: 3 | RNVC: 2

18 Nov 1987

4730-14-514-6268
Tube Coupling

145146268
10000D30320: RNCC: 3 | RNVC: 2

3 Jun 1999

4730-14-484-4738
Tube Tee

144844738
5005030178: RNCC: 3 | RNVC: 2

21 Nov 1996

4730-14-378-0329
Tube Tee

143780329
32543780: RNCC: 3 | RNVC: 2

20 Jul 1982

4730-14-330-1545
Tube To Boss Straight Adapter

143301545
A75387: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-436-8951
Tube To Gas Fitting Straight Adapter

144368951
01141013: RNCC: 3 | RNVC: 2

8 Jan 1990

4730-14-366-9087
Tube Tee

143669087
81405701: RNCC: 3 | RNVC: 2
32A822NE: RNCC: 5 | RNVC: 2
5000494577: RNCC: 5 | RNVC: 2
32A8L2NE: RNCC: 5 | RNVC: 2
5000494577: RNCC: 5 | RNVC: 9
F300 0T 020 0758: RNCC: 6 | RNVC: 9
5000494577: RNCC: 6 | RNVC: 9

11 Dec 1980

4730-14-523-6369
Tube To Boss Straight Adapter

145236369
B5037599: RNCC: 3 | RNVC: 2

31 Jan 2001

4730-14-220-5476
Tube To Boss Straight Adapter

142205476
0000128370: RNCC: 3 | RNVC: 2
128370: RNCC: 5 | RNVC: 9
0000128370: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-543-8556
Tube To Boss Straight Adapter

145438556
560503463: RNCC: 3 | RNVC: 2

14 Dec 2004

4730-14-523-0403
Hydraulic System Accessories Manifold

145230403
33832: RNCC: 3 | RNVC: 2

20 Dec 2000

4730-14-410-7241
Fluid Pressure Line Multiple Connector

144107241
160H702501-22: RNCC: 3 | RNVC: 2

9 Jul 1986

4730-14-382-7106
Bulkhead Hose Connector

143827106
0290250038: RNCC: 3 | RNVC: 2

17 Feb 1983

4730-14-332-0640
Bulkhead Hose Connector

143320640
R7012Z58: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-483-2808
Hose Coupling Assembly

144832808
DA2C729009630: RNCC: 3 | RNVC: 2

29 Aug 1996

4730-14-476-4484
Tube To Boss Straight Adapter

144764484
331496: RNCC: 3 | RNVC: 2

14 Jun 1995

4730-14-319-7844
Pipe Flange

143197844
0000146427: RNCC: 3 | RNVC: 2
146427: RNCC: 5 | RNVC: 9
0000146427: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-380-0159
Tube To Boss Straight Adapter

143800159
RT13204: RNCC: 3 | RNVC: 2

21 Nov 2001

4730-14-537-5827
Non-Metallic Connecting Sleeve

145375827
DLT604341: RNCC: 3 | RNVC: 2

7 Nov 2003

4730-14-499-2590
Fluid Pressure Line Multiple Connector

144992590
13DSO12-3-8NU: RNCC: 3 | RNVC: 2
13DS012 3-8NU: RNCC: 3 | RNVC: 9
A07051305: RNCC: 5 | RNVC: 2
A07051305: RNCC: 5 | RNVC: 9
F300 0T 020 4945: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-426-7710
Tube Tee

144267710
4730HEING060,3X2,9-26,9X2: RNCC: 2 | RNVC: 2

21 Sep 1988

4730-14-295-4397
Swivel Retaining Pipe Flange

142954397
A2-64764: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-411-1906
Fluid Pressure Line Multiple Connector

144111906
332A75-2621-20: RNCC: 3 | RNVC: 2

6 Aug 1986

4730-14-329-9364
Tube To Boss Straight Adapter

143299364
BN320-524TYPEA: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-268-1185
Pipe Flange

142681185
6784-1DD28: RNCC: 2 | RNVC: 2
MEC11407: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-366-3870
Tube To Boss Straight Adapter

143663870
043-05-43-002A: RNCC: 3 | RNVC: 2

20 Nov 1980

4730-14-572-2162
Union Nut

145722162
332A39-1096-20: RNCC: 3 | RNVC: 2
332A39109620: RNCC: 5 | RNVC: 2

15 Jun 2012

4730-14-213-8261

4730-14-506-4547
Bulkhead Hose Connector

145064547
441784: RNCC: 3 | RNVC: 2
441784: RNCC: 5 | RNVC: 2

29 Apr 1998

4730-14-422-1913
Pipe Flange

144221913
D05174202: RNCC: 3 | RNVC: 2

24 Feb 1988

4730-14-521-4274
Quick Disconnect Coupling Half

145214274
GL 00650 14: RNCC: 3 | RNVC: 2
GL0065014: RNCC: 5 | RNVC: 2

26 Jul 2000

4730-14-489-4586
Fluid Passage Bolt

144894586
VIS0091042X00: RNCC: 3 | RNVC: 2

23 Jul 1997

4730-14-332-0647
Bulkhead Hose Connector

143320647
R5808Z48: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-246-1286

4730-14-497-7486

4730-14-230-5962
Tube Coupling Assembly

142305962
3601S10A: RNCC: 3 | RNVC: 2
3601S10A: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-377-6676

4730-14-251-9989

4730-14-262-1782

4730-14-427-9866
Tube Tee

144279866
17-35NN: RNCC: 3 | RNVC: 2

24 Nov 1988

4730-14-507-6601
Fluid Pressure Line Multiple Connector

145076601
WH10PLMKDSA3C: RNCC: 3 | RNVC: 2
435660: RNCC: 5 | RNVC: 9

11 Aug 1998

4730-14-383-1862
Fluid Passage Bolt

143831862
MY205151003G01: RNCC: 3 | RNVC: 2

17 Mar 1983

4730-14-448-1626
Fluid Pressure Line Multiple Connector

144481626
106074400101: RNCC: 3 | RNVC: 2
106074400101: RNCC: 5 | RNVC: 2

12 Jun 1991

4730-14-269-1766

4730-14-359-8755
Bride Intermediaire

143598755
2-16150: RNCC: 3 | RNVC: 2

15 Oct 1979

4730-14-309-3166

4730-14-334-3363
Tube Tee

143343363
36363: RNCC: 3 | RNVC: 9

23 Apr 1976

4730-14-369-7042
Tube Fitting Clinch Sleeve

143697042
LL023-NS21LGAZ: RNCC: 3 | RNVC: 2
84242102: RNCC: 5 | RNVC: 2

17 Apr 1981

4730-14-414-2588
Fluid Passage Bolt

144142588
43312AD120L: RNCC: 2 | RNVC: 2
43312AD12L: RNCC: 5 | RNVC: 9

28 Jan 1987

4730-14-508-4348
Straight Tubing Connector

145084348
608459: RNCC: 3 | RNVC: 2

9 Sep 1998

4730-14-372-2176
Tube To Boss Straight Adapter

143722176
7189102108: RNCC: 3 | RNVC: 2
16106800: RNCC: 5 | RNVC: 2

1 Sep 1981

4730-14-360-9090

4730-14-305-6319
Tube To Boss Straight Adapter

143056319
4A20-21-27C0: RNCC: 3 | RNVC: 2
MC20-27: RNCC: 3 | RNVC: 2
12-20-21-27C0: RNCC: 3 | RNVC: 2
0946670081: RNCC: 5 | RNVC: 2
946670081: RNCC: 5 | RNVC: 9
0946670081: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-300-0482
Fluid Pressure Line Multiple Connector

143000482
00370-97: RNCC: 3 | RNVC: 2
X00370-97: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-346-7088
Bride Speciale

143467088
6784-1DR28: RNCC: 2 | RNVC: 2

12 Dec 1977

4730-14-503-3787
Adapter And Flange Assembly

145033787
5124249: RNCC: 3 | RNVC: 2
4330-65-0000001: RNCC: 6 | RNVC: 9

14 Jan 1998

4730-14-358-6468
Self-Sealing Coupling Assembly

143586468
C2680: RNCC: 3 | RNVC: 2

7 Sep 1979

4730-14-459-5022
Fluid Passage Bolt

144595022
14053700L: RNCC: 3 | RNVC: 2

9 Dec 1992

4730-14-397-9418
Bulkhead Hose Connector

143979418
PPA12NU: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-032-2849
Tube To Boss Straight Adapter

140322849
K7809CA01EREP3: RNCC: 3 | RNVC: 2

10 Jun 1982

4730-14-238-7463
Tube Tee

142387463
1TR8X6X6NN: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-434-3034
Fluid Pressure Line Multiple Connector

144343034
554036: RNCC: 3 | RNVC: 2

20 Sep 1989

4730-14-362-4973
Tube To Boss Straight Adapter

143624973
002855282P: RNCC: 3 | RNVC: 2

19 Mar 1980

4730-14-457-0994
Fluid Passage Bolt

144570994
M4ZS460D8486A: RNCC: 3 | RNVC: 2

6 Aug 1992

4730-14-279-7375
Tube To Boss Straight Adapter

142797375
110532: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-276-0586
Tube To Boss Straight Adapter

142760586
400716: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-528-3316
Tube Coupling

145283316
21 626 102: RNCC: 3 | RNVC: 2

22 Jan 2002

4730-14-554-5827
Tube Coupling

145545827
9932200600: RNCC: 3 | RNVC: 2

23 Jul 2007

4730-14-552-1149
Straight Tubing Connector

145521149
0000270060: RNCC: 3 | RNVC: 2

27 Nov 2006

4730-14-523-6782
Fuel Feeder Manifold

145236782
J284529: RNCC: 3 | RNVC: 2
J933295: RNCC: 3 | RNVC: 9

31 Jan 2001

4730-14-408-3551
Tube To Boss Straight Adapter

144083551
8405263466NU: RNCC: 3 | RNVC: 2

19 Mar 1986

4730-14-559-4632
Fluid Pressure Line Multiple Connector

145594632
330A52-9821: RNCC: 3 | RNVC: 2

14 Jan 2009

4730-14-346-6780

4730-14-508-7916
Peigne Adaptateur

145087916
PE 12715: RNCC: 3 | RNVC: 2
PE12715: RNCC: 5 | RNVC: 9

30 Sep 1998

4730-14-294-0670

4730-14-557-1680
Tube Nipple

145571680
1903D947: RNCC: 3 | RNVC: 2
RE16D: RNCC: 5 | RNVC: 2

22 May 2008

4730-14-566-6499
Fluid Pressure Line Multiple Connector

145666499
SWVE18LRKDSOMDCF: RNCC: 3 | RNVC: 2
A231004000365: RNCC: 5 | RNVC: 2

2 Dec 2010

4730-14-503-1881
Bulkhead Hose Connector

145031881
RA1M522004171U2: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-424-3546
Tube Tee

144243546
10A12L: RNCC: 3 | RNVC: 2

19 May 1988

4730-14-503-1813
Bulkhead Hose Connector

145031813
RA1M543304130A1: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-393-5888
Tube To Boss Straight Adapter

143935888
890055: RNCC: 3 | RNVC: 2

7 Jun 1984

4730-14-277-4641
Bouchon Rapide

142774641
10270-0: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-578-3597
Quick Disconnect Coupling Half

145783597
96195052AA: RNCC: 3 | RNVC: 2
N 005 377 10: RNCC: 5 | RNVC: 1

22 Nov 2013

4730-14-253-6156
Ejecteur Special

142536156
42-495-0: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-385-9520
Equerre Raccord

143859520
56019: RNCC: 3 | RNVC: 9

24 Aug 1983

4730-14-307-5171
Hose Coupling Assembly

143075171
9952133A: RNCC: 3 | RNVC: 2
9952133: RNCC: 3 | RNVC: 9
9-95-21-33: RNCC: 5 | RNVC: 9
9-95-21-33A: RNCC: 5 | RNVC: 9
TAH1136-4: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-406-8740
Fluid Filter Element

144068740
NO PRIMARY REF14-406-8740: RNCC: 3 | RNVC: 2
SHB481103351W00: RNCC: 5 | RNVC: 9

8 Jan 1986

4730-14-437-8024
Tube To Boss Straight Adapter

144378024
F0532S4710X0002-7091: RNCC: 3 | RNVC: 2
LW170-CW5283N: RNCC: 3 | RNVC: 2
5A8/12X150SDTAT: RNCC: 3 | RNVC: 2
S4710X0002-7091: RNCC: 5 | RNVC: 2
2808V99063: RNCC: 5 | RNVC: 2
EMDAS05901: RNCC: 5 | RNVC: 2

20 Feb 1990

4730-14-323-3787
Fond Inferieur

143233787
A0187-003F12: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-470-1488
Fluid Flow Restrictor

144701488
76058013800: RNCC: 3 | RNVC: 2
573457-00: RNCC: 5 | RNVC: 2

1 Jun 1994

4730-14-326-2823
A Souder Oeilleton

143262823
330A11-0495-20: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-223-8685
Raccord A Joint Cou

142238685
GSM1297FE4-40TABLEAU1: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-329-4098
Sediment Strainer Element

143294098
A3318AREP1: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-365-1520
Venti Gaine Raccord

143651520
969874: RNCC: 3 | RNVC: 2
969874: RNCC: 5 | RNVC: 9

2 Sep 1980

4730-14-441-0472
Tube Union

144410472
F9BPB8M12X1,5CO: RNCC: 3 | RNVC: 2
34750867: RNCC: 3 | RNVC: 2
F9BPAB8M12X1,5PTC: RNCC: 5 | RNVC: 2
5005330200: RNCC: 5 | RNVC: 2
5005330041: RNCC: 5 | RNVC: 2

16 Aug 1990

4730-14-267-3511
Fluid Pressure Line Multiple Connector

142673511
0000300920: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-474-9465
Quick Disconnect Coupling Half

144749465
WV0602700: RNCC: 3 | RNVC: 2
RAR1640: RNCC: 5 | RNVC: 2

14 Mar 1995

4730-14-574-9208
Fluid Passage Bolt

145749208
M5281009900000: RNCC: 3 | RNVC: 2
M52810099000: RNCC: 5 | RNVC: 2

28 Feb 2013

4730-14-365-0111

4730-14-334-0346

4730-14-271-6607
Mamelon Special

142716607
7032401: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-269-2106

4730-14-269-2113

4730-14-031-6482
Embout Reduction A

140316482
Q5-5SKR20-10X2-5: RNCC: 3 | RNVC: 2

14 Jun 1980

4730-14-407-3489
Tube Union

144073489
DLT056476A: RNCC: 3 | RNVC: 2

12 Feb 1986

4730-14-367-0408

4730-14-556-7487
Pipe Nipple

145567487
8280 346: RNCC: 3 | RNVC: 2

8 Apr 2008

4730-14-336-8990

4730-14-330-9571

4730-14-040-6437

4730-14-307-6344
Ense Valve Jonction

143076344
DC611: RNCC: 3 | RNVC: 1

1 Jan 1974

4730-14-365-3092

4730-14-405-0690
Tube Coupling

144050690
270GCU14 3/8: RNCC: 3 | RNVC: 2

20 Nov 1985

4730-14-559-1502
Tube To Hose Straight Adapter

145591502
DH 5182 40 03 03: RNCC: 3 | RNVC: 2

10 Dec 2008

4730-14-561-7886
Tube To Gas Fitting Straight Adapter

145617886
RAST34690606: RNCC: 3 | RNVC: 2

7 Sep 2009

4730-14-577-0763
Boss Outlet

145770763
0301040510: RNCC: 3 | RNVC: 2

5 Aug 2013

4730-14-462-9363
Type 2 Tape

144629363
89160725: RNCC: 3 | RNVC: 9

7 May 1993

4730-14-306-7586
Bride A Zinc

143067586
000MA0782F4REP1DN50: RNCC: 3 | RNVC: 2
000MA782F4REP1DN50: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-560-1039
Tube Tee

145601039
XBELV DKO 15 L: RNCC: 3 | RNVC: 2
XBELVDKO15LZB: RNCC: 3 | RNVC: 9
K1137221: RNCC: 5 | RNVC: 2
CV155642: RNCC: 5 | RNVC: 2
K1137221: RNCC: 5 | RNVC: 2

24 Mar 2009

4730-14-418-6204
Bague Pour Collier

144186204
MAT169-0001F19DE57: RNCC: 3 | RNVC: 2

7 Sep 1987

4730-14-419-6821
Fluid Filter Element

144196821
929NK-DN12-FILTRE-5/10INOX: RNCC: 3 | RNVC: 2

2 Nov 1987

4730-14-450-5468
Tube To Boss Straight Adapter

144505468
F4BXS10-1/4: RNCC: 3 | RNVC: 2
F4BXS10-1-4: RNCC: 5 | RNVC: 2
91713710: RNCC: 5 | RNVC: 2

9 Oct 1991

4730-14-504-1459
Robinet

145041459
GA47875-100: RNCC: 3 | RNVC: 2

10 Feb 1998

4730-14-215-1531

4730-14-293-0869
Quick Disconnect Coupling Half

142930869
6702F4B15RACC0RD80: RNCC: 2 | RNVC: 2

1 Jan 1973

4730-14-351-2233
Fluid Passage Bolt

143512233
486306T: RNCC: 3 | RNVC: 2

10 Aug 1978

4730-14-388-9316
Tube Coupling

143889316
39086149: RNCC: 3 | RNVC: 2
39086149: RNCC: 5 | RNVC: 9
39086149: RNCC: 5 | RNVC: 9

29 Nov 1983

4730-14-436-8465
Hose Coupling Assembly

144368465
DA2C729001320A1: RNCC: 3 | RNVC: 2

3 Jan 1990

4730-14-515-3861
Tube To Boss Straight Adapter

145153861
6200129: RNCC: 3 | RNVC: 2

13 Jul 1999

4730-14-481-2184
Tube To Boss Straight Adapter

144812184
33 42 27: RNCC: 3 | RNVC: 2

25 Apr 1996

4730-14-280-8576
Pipeline Flexible Spacer

142808576
DILAT0FLEX150HYDR0CARBURE8X22X2-: RNCC: 3 | RNVC: 1

1 Jan 1971

4730-14-396-6946
Tube To Boss Straight Adapter

143966946
79093496: RNCC: 3 | RNVC: 2
79093496: RNCC: 5 | RNVC: 9

27 Nov 1984

4730-14-228-6882
Tube Fitting Clinch Sleeve

142286882
205-36: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-235-0834
Pipe Flange

142350834
479P417: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-420-0586
Tube To Boss Straight Adapter

144200586
O2015F: RNCC: 3 | RNVC: 2

18 Nov 1987

4730-14-543-7989
Tube To Boss Straight Adapter

145437989
9320581: RNCC: 3 | RNVC: 2

10 Dec 2004

4730-14-510-3950
Tube-Pipe Fitting Kit

145103950
SOMF1: RNCC: 3 | RNVC: 2
4730AA8023142: RNCC: 6 | RNVC: 9

4 Nov 1998

4730-14-344-3379
Bulkhead Hose Connector

143443379
A11A221272001: RNCC: 3 | RNVC: 2

10 Aug 1977

4730-14-356-1118
Fluid Pressure Line Multiple Connector

143561118
R37175SMRACC0RD: RNCC: 3 | RNVC: 2

5 Apr 1979

4730-14-364-7186
Tube Tee

143647186
R4X8LX8: RNCC: 3 | RNVC: 2

2 Sep 1980

4730-14-378-9011
Tube Tee

143789011
5000014916: RNCC: 3 | RNVC: 2
5000014916: RNCC: 5 | RNVC: 9

6 Sep 1982

4730-14-273-5345
Pipe Flange

142735345
7062TC1F1F36UA9NFEM: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-471-5729
Quick Disconnect Coupling Half

144715729
119E4150LTAJ: RNCC: 3 | RNVC: 2

1 Sep 1994

4730-14-332-0677
Bulkhead Hose Connector

143320677
R7006Z78: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-434-7701
Self-Sealing Coupling Half

144347701
DC28T12TF: RNCC: 3 | RNVC: 2
0855165600: RNCC: 5 | RNVC: 2

4 Oct 1989

4730-14-414-4839
Filtre Conique

144144839
BCN1510: RNCC: 3 | RNVC: 2
352250041161: RNCC: 5 | RNVC: 2

4 Feb 1987

4730-14-255-8496
Raccord De Jonction

142558496
F3610: RNCC: 3 | RNVC: 9

1 Jan 1969

4730-14-276-2213
Raccord Special

142762213
A48900: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-565-4321
Tube To Boss Straight Adapter

145654321
222EB018: RNCC: 3 | RNVC: 2
A231004000630: RNCC: 5 | RNVC: 2

18 Aug 2010

4730-14-340-6357

4730-14-257-4602

4730-14-576-7539
Hose Reducer

145767539
RA.14.14.18: RNCC: 3 | RNVC: 2

10 Jul 2013

4730-14-286-4071

4730-14-260-9208

4730-14-543-8546
Tube Union

145438546
1000006051: RNCC: 3 | RNVC: 2

14 Dec 2004

4730-14-275-1127

4730-14-301-4987

4730-14-570-2260
Quick Disconnect Coupling Half

145702260
N01123509: RNCC: 3 | RNVC: 2
N01123509: RNCC: 5 | RNVC: 2

30 Nov 2011

4730-14-345-1020

4730-14-542-2877
Tube Coupling

145422877
954624208: RNCC: 3 | RNVC: 2
954624208: RNCC: 5 | RNVC: 9

8 Jul 2004

4730-14-459-3111
Pipe Flange

144593111
DLT118532: RNCC: 3 | RNVC: 2
RAR1612: RNCC: 5 | RNVC: 2

24 Nov 1992

4730-14-248-4797
Corps A Clapet De R

142484797
QSK15: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-356-6310

4730-14-032-3248
Tube To Boss Straight Adapter

140323248
8954107566: RNCC: 3 | RNVC: 2

14 Dec 1982

4730-14-220-6145
Tube Tee

142206145
R7616: RNCC: 3 | RNVC: 2
91336600: RNCC: 5 | RNVC: 2
91336600: RNCC: 5 | RNVC: 2
EDM0018: RNCC: 5 | RNVC: 2
96054608: RNCC: 7 | RNVC: 2

1 Jan 1965

4730-14-256-6025

4730-14-568-3411
Tube To Hose Tee

145683411
5005630084: RNCC: 1 | RNVC: 2
93401121: RNCC: 3 | RNVC: 2
20747944: RNCC: 5 | RNVC: 2

24 May 2011

4730-14-220-6577
Tube Tee

142206577
Q1-5TR20X14X14SD: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-257-1736
Te Tube Equipe

142571736
330A72-0013-00: RNCC: 3 | RNVC: 2
330A72-0013-0000: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-566-1769
Pipe Elbow

145661769
A093552 06 06: RNCC: 3 | RNVC: 2

25 Oct 2010

4730-14-494-5358
Anchor And Reinforcement Pipe Clamp

144945358
602 757 29: RNCC: 3 | RNVC: 2
F300 0T 017 4531: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-522-4379
Tube To Boss Straight Adapter

145224379
10352556: RNCC: 3 | RNVC: 2

31 Oct 2000

4730-14-483-6769
Pipe Flange

144836769
38427472: RNCC: 3 | RNVC: 2

27 Sep 1996

4730-14-554-1385
Tube To Boss Straight Adapter

145541385
352 675: RNCC: 3 | RNVC: 2
352 675: RNCC: 3 | RNVC: 2

12 Jun 2007

4730-14-541-0063
Tube To Boss Straight Adapter

145410063
6501BRT114700: RNCC: 3 | RNVC: 2

5 May 2004

4730-14-460-4524
Quick Disconnect Coupling Assembly

144604524
HBPB4: RNCC: 3 | RNVC: 2
89472090: RNCC: 5 | RNVC: 2
5005330064: RNCC: 5 | RNVC: 2

26 Jan 1993

4730-14-307-7434
Sediment Strainer Element

143077434
1430267: RNCC: 3 | RNVC: 9

1 Jan 1974

4730-14-218-3792
Fluid Passage Bolt

142183792
1S10-30A: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-512-7406
Fluid Pressure Line Multiple Connector

145127406
800040800: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-368-0525
Pipe Expansion Joint

143680525
26442800800: RNCC: 3 | RNVC: 2
26.442.800800: RNCC: 5 | RNVC: 2
264428008: RNCC: 5 | RNVC: 9

19 Jan 1981

4730-14-545-6182
Tube To Boss Straight Adapter

145456182
0184302007: RNCC: 3 | RNVC: 2
91830757: RNCC: 5 | RNVC: 2

26 Apr 2005

4730-14-408-3881
Tube Fitting Clinch Sleeve

144083881
81243800: RNCC: 3 | RNVC: 2

19 Mar 1986

4730-14-444-3391
Tube Tee

144443391
TR12X18X12: RNCC: 3 | RNVC: 2

8 Jan 1991

4730-14-464-0199
Tube Coupling Inverted Nut

144640199
BRAB6: RNCC: 3 | RNVC: 2

7 Jul 1993

4730-14-553-4411
Tube Coupling

145534411
0319740010: RNCC: 3 | RNVC: 2

4 Apr 2007

4730-14-228-8199
Pipe Flange

142288199
DLT005234: RNCC: 3 | RNVC: 2
DLT05234: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-333-3399

4730-14-378-2927
Grain De Fond

143782927
11879REP9: RNCC: 3 | RNVC: 2

20 Jul 1982

4730-14-278-3097

4730-14-578-3966
Tube Cap

145783966
NJU03128: RNCC: 3 | RNVC: 2

26 Nov 2013

4730-14-327-5101

4730-14-312-0907

4730-14-230-7116
Pipe Flange

142307116
GSM1947REP13MALE: RNCC: 3 | RNVC: 2
GSM1947DET13MALE: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-367-7194

4730-14-505-3101
Swivel Flange To Hose Elbow

145053101
C8BFR12M22: RNCC: 3 | RNVC: 2

18 Mar 1998

4730-14-552-8155
Pipe To Boss Straight Adapter

145528155
02015: RNCC: 3 | RNVC: 2

5 Feb 2007

4730-14-496-3283
Fluid Passage Bolt

144963283
129397: RNCC: 3 | RNVC: 2
F300 0T 021 3981: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-360-5858
Tube To Boss Straight Adapter

143605858
16787479: RNCC: 3 | RNVC: 2
16787479: RNCC: 5 | RNVC: 9

19 Dec 1979

4730-14-492-3169
Tube To Boss Straight Adapter

144923169
0870152000: RNCC: 3 | RNVC: 2
F300 0T 007 3723: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-563-0791
Quick Disconnect Coupling Assembly

145630791
R1048: RNCC: 3 | RNVC: 2

21 Dec 2009

4730-14-263-7074

4730-14-263-6336

4730-14-257-6138
Cheminee De Graissa

142576138
172P427: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-454-1623
Jonction A Brides

144541623
22238: RNCC: 3 | RNVC: 2

24 Mar 1992

4730-14-209-8438
Bouchon De Regard S

142098438
74040: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-335-1342

4730-14-200-4130

4730-14-557-6754
Flange To Hose Straight Adapter

145576754
300046201: RNCC: 3 | RNVC: 2

2 Jul 2008

4730-14-010-1585

4730-14-270-0115

4730-14-261-4034

4730-14-523-6789
Tube To Boss Straight Adapter

145236789
J941472: RNCC: 3 | RNVC: 2

31 Jan 2001

4730-14-395-3722
Tube Tee

143953722
N0117F37A: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-493-8346
Fluid Pressure Line Multiple Connector

144938346
5000240542: RNCC: 3 | RNVC: 2
F300 0T 014 2051: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-325-3830
Tube To Boss Straight Adapter

143253830
H44026-3: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-525-1420
Quick-Disconnect Nipple

145251420
IRM 111 103: RNCC: 3 | RNVC: 2

22 May 2001

4730-14-359-9012
Bride Centrale Arr

143599012
2-23666: RNCC: 3 | RNVC: 2

15 Oct 1979

4730-14-553-3934
Bulkhead Hose Connector

145533934
M4721303300000: RNCC: 3 | RNVC: 2
M4721303300000: RNCC: 5 | RNVC: 2

29 Mar 2007

4730-14-476-0892
Pipe Flange

144760892
222-3017-908: RNCC: 3 | RNVC: 2

17 May 1995

4730-14-341-8079

4730-14-373-0751

4730-14-436-8436
Hose Coupling Assembly

144368436
DA2C500053630: RNCC: 3 | RNVC: 2

3 Jan 1990

4730-14-478-5680
Tube-Hose Fitting Compression Sleeve

144785680
743 T 06: RNCC: 3 | RNVC: 2
74743T06: RNCC: 5 | RNVC: 2
743T06: RNCC: 5 | RNVC: 2

8 Nov 1995

4730-14-378-1258
Fluid Pressure Line Multiple Connector

143781258
DLT602127: RNCC: 3 | RNVC: 2
406: RNCC: 5 | RNVC: 2

20 Jul 1982

4730-14-325-9074
Pipe Flange

143259074
AS34TV106REP25: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-362-4049
Tube Tee

143624049
91082022: RNCC: 3 | RNVC: 2
A14-20-21-27: RNCC: 5 | RNVC: 9

19 Mar 1980

4730-14-457-7049
Reducteur Symetriqu

144577049
9688-02DN20: RNCC: 3 | RNVC: 2

16 Sep 1992

4730-14-344-5107

4730-14-305-6890

4730-14-527-3092
Tube Coupling

145273092
5172342000: RNCC: 3 | RNVC: 2

22 Oct 2001

4730-14-547-1081
Lubrication Fitting

145471081
P504019: RNCC: 3 | RNVC: 2
4KK9: RNCC: 5 | RNVC: 2

23 Sep 2005

4730-14-543-6846
Tube To Hose Straight Adapter

145436846
719014: RNCC: 3 | RNVC: 2

2 Dec 2004

4730-14-230-7128
Pipe Flange

142307128
GSM1947REP3FEMELLE: RNCC: 3 | RNVC: 2
GSM1947DET3FEMELLE: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-282-2085

4730-14-282-1953

4730-14-512-8568
Tube Coupling

145128568
405950: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-378-0163

4730-14-342-3381

4730-14-367-7314

4730-14-400-9692
Tube To Boss Straight Adapter

144009692
23S06042: RNCC: 3 | RNVC: 2
23S06042: RNCC: 5 | RNVC: 2

21 May 1985

4730-14-450-0174
Swivel Retaining Pipe Flange

144500174
39083777: RNCC: 3 | RNVC: 2
39083777: RNCC: 5 | RNVC: 9

18 Sep 1991

4730-14-265-1599

4730-14-565-1167
Tube To Boss Straight Adapter

145651167
82536189000: RNCC: 3 | RNVC: 2

12 Jul 2010

4730-14-329-3103

4730-14-367-7299

4730-14-336-1159

4730-14-492-1557
Fluid Passage Bolt

144921557
0000154930: RNCC: 3 | RNVC: 2
F300 0T 007 0803: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-302-8266
Tube Coupling

143028266
3751P16A: RNCC: 3 | RNVC: 2
3751P16A: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-418-4465
Pipe Flange

144184465
3550028: RNCC: 3 | RNVC: 2

26 Aug 1987

4730-14-374-7787
Bulkhead Hose Connector

143747787
0264351190: RNCC: 3 | RNVC: 2

30 Jan 1982

4730-14-551-7037
Drainage Pipe Coupling

145517037
0322857040: RNCC: 3 | RNVC: 2

17 Oct 2006

4730-14-422-0789
Tube To Boss Straight Adapter

144220789
GE25SR71: RNCC: 3 | RNVC: 2
GE25SR71: RNCC: 3 | RNVC: 9
GE25PSR1.4571: RNCC: 5 | RNVC: 9
GE25PSR71: RNCC: 5 | RNVC: 9

22 Feb 1988

4730-14-325-9011
Pipe Flange

143259011
AS34TV107REP7: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-293-3196

4730-14-564-1119
Tube To Hose Straight Adapter

145641119
606GB009: RNCC: 3 | RNVC: 2
A430400100114: RNCC: 5 | RNVC: 2

8 Apr 2010

4730-14-261-7867

4730-14-262-1442

4730-14-229-2164
Raccord Droit Speci

142292164
263450: RNCC: 3 | RNVC: 2
263450: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-285-3536

4730-14-262-1808

4730-14-569-1121
Fluid Passage Bolt

145691121
A559229: RNCC: 3 | RNVC: 2

9 Aug 2011

4730-14-255-2602
Raccord Multiple Co

142552602
SBM208: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-229-0285
Corps De Bypass

142290285
0000132100: RNCC: 3 | RNVC: 2
0000132100: RNCC: 5 | RNVC: 9
132100: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-203-6442

4730-14-563-9394
Tube Cap

145639394
314821-1: RNCC: 3 | RNVC: 2

29 Mar 2010

4730-14-377-0246
Bride

143770246
2-21677: RNCC: 3 | RNVC: 2

28 Apr 1982

4730-14-428-0919
Ens Liaison Brides

144280919
B3450FS003F28: RNCC: 3 | RNVC: 2

30 Nov 1988

4730-14-523-4483
Boitier Prote.Surpr

145234483
SBE1110D: RNCC: 3 | RNVC: 2

22 Jan 2001

4730-14-210-9779
Te De Reduction

142109779
5TR25X14X25: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-420-1637
Degazeur

4730-14-429-8217

4730-14-347-3112

4730-14-459-0117
Tube Union

144590117
1803230: RNCC: 3 | RNVC: 2
1803230: RNCC: 5 | RNVC: 2

11 Nov 1992

4730-14-281-3693

4730-14-560-5082
Tube To Boss Straight Adapter

145605082
12 45 50 60 NU: RNCC: 3 | RNVC: 2

27 Apr 2009

4730-14-309-4679
Tube To Boss Straight Adapter

143094679
R95405D14-18X150D: RNCC: 2 | RNVC: 2
41871: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-335-7884
Tube Tee

143357884
702A30-5500-07: RNCC: 3 | RNVC: 2

30 Jun 1976

4730-14-041-3783
Bulkhead Hose Connector

140413783
N410-129: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-335-9883
Raccord Tourn Corps

143359883
1053-01-03: RNCC: 3 | RNVC: 2

24 Jul 1976

4730-14-576-2960
Magnetic Plug Assortment

145762960
168579: RNCC: 3 | RNVC: 2

11 Jun 2013

4730-14-523-7831

4730-14-523-5956

Load More Results