What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 88 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 88 of 185

4730-14-269-2111

4730-14-561-9868
Sediment Strainer

145619868
0390957340: RNCC: 3 | RNVC: 2

22 Sep 2009

4730-14-252-1728

4730-14-412-8698
Fluid Pressure Line Multiple Connector

144128698
G109-13-18X150TF: RNCC: 3 | RNVC: 2

5 Nov 1986

4730-14-417-7779
Tube To Boss Straight Adapter

144177779
LN329-017REP09: RNCC: 3 | RNVC: 2
LW114-NS1408S: RNCC: 3 | RNVC: 2
84011421NU: RNCC: 5 | RNVC: 2
LN329-017F16DN13,5G1/2"A: RNCC: 5 | RNVC: 2

22 Jul 1987

4730-14-378-3250
Pipe Flange

143783250
E64-35-3212-112BBRIDEDN100: RNCC: 3 | RNVC: 2

20 Jul 1982

4730-14-269-1862
Pipe Flange

142691862
7066CD1M25: RNCC: 2 | RNVC: 2
4730BB-25M: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-449-7644
Quick-Disconnect Nipple

144497644
BN324-621DN25: RNCC: 2 | RNVC: 2

6 Sep 1991

4730-14-010-0350
Fluid Passage Bolt

140100350
3130S62-21-109: RNCC: 3 | RNVC: 2

1 Jan 1961

4730-14-042-3350
Air Hose Connector

140423350
1500-13-510: RNCC: 3 | RNVC: 2
1500-13-510: RNCC: 5 | RNVC: 9

16 Jun 1977

4730-14-416-3315
Pipe Flange

144163315
E29203-01A-PN16DN150Z3CND18-12: RNCC: 2 | RNVC: 2
E29203-01A-PN16DN150Z2CND17-12: RNCC: 5 | RNVC: 2
4730JEDN150: RNCC: 5 | RNVC: 2

3 Jun 1987

4730-14-423-5602
Bulkhead Hose Connector

144235602
F521-06-04: RNCC: 3 | RNVC: 2

21 Apr 1988

4730-14-451-5805
Tube To Boss Straight Adapter

144515805
A03037-10-6020P010: RNCC: 3 | RNVC: 2

21 Nov 1991

4730-14-573-0597
Tube To Boss Straight Adapter

145730597
BBPC-13H6000: RNCC: 3 | RNVC: 2

10 Sep 2012

4730-14-303-2023
Bulkhead Hose Connector

143032023
A10-52-517-04-0: RNCC: 3 | RNVC: 2
A10-52-517-04-0: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-283-5518
Tube Tee

142835518
TE40X25X32.0.2: RNCC: 3 | RNVC: 2
TE40-25-32-0-2: RNCC: 5 | RNVC: 2
TE40-25-32-02: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-439-8863
Fluid Flow Restrictor Unit

144398863
LN326-053-01-DE10,2: RNCC: 3 | RNVC: 2

30 May 1990

4730-14-426-7405
Tube Tee

144267405
4730HEING021,3X3,6-10,2X1,6: RNCC: 2 | RNVC: 2

20 Sep 1988

4730-14-505-1895
Pipe To Boss Straight Adapter

145051895
XAGEV28L1-1/16: RNCC: 3 | RNVC: 2
E4750319: RNCC: 3 | RNVC: 9

11 Mar 1998

4730-14-405-0702
Tube Coupling

144050702
FILETAGE1 1/4FEMELLE: RNCC: 3 | RNVC: 9

20 Nov 1985

4730-14-261-8466
Raccord Ebauche Ada

142618466
RDE40UA9: RNCC: 3 | RNVC: 9

1 Jan 1970

4730-14-311-4462
Embout Raccord Tour

143114462
A77727: RNCC: 3 | RNVC: 2
A77727: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-562-1783
Fluid Passage Bolt

145621783
3527 00 13: RNCC: 3 | RNVC: 2
FS0002445: RNCC: 6 | RNVC: 9

6 Oct 2009

4730-14-305-3559
Corps Clapet Dechar

143053559
557809: RNCC: 3 | RNVC: 2
557809: RNCC: 5 | RNVC: 2
5155780900: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-353-7497
Fluid Pressure Line Multiple Connector

143537497
A11A221278011: RNCC: 3 | RNVC: 2

16 Jan 1979

4730-14-527-0255
Quick Disconnect Coupling Half

145270255
135613: RNCC: 3 | RNVC: 2
SYQ0398: RNCC: 5 | RNVC: 2

26 Sep 2001

4730-14-544-2277
Pipe Flange

145442277
4S0099K250001: RNCC: 3 | RNVC: 2

11 Jan 2005

4730-14-335-2923
Tube Fitting Brazing Ferrule

143352923
196236: RNCC: 3 | RNVC: 2

30 Jun 1976

4730-14-525-6355
Return Tube Bend

145256355
20 236 922 4150: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-553-4929
Hydraulic Manifold Assembly

145534929
PRAE01611: RNCC: 3 | RNVC: 2

6 Apr 2007

4730-14-217-3568
Tube Coupling

142173568
3751S16A: RNCC: 3 | RNVC: 2
9567130030: RNCC: 5 | RNVC: 2
3751K16A: RNCC: 5 | RNVC: 9
3751S16A: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-305-7162
Tube Fitting Flared Sleeve

143057162
6705: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-267-7215
Tube To Boss Straight Adapter

142677215
03-2751: RNCC: 3 | RNVC: 2
03-2751: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-373-1921
Quick Disconnect Coupling Assembly

143731921
204546: RNCC: 3 | RNVC: 2

21 Oct 1981

4730-14-372-0804
Tube Tee

143720804
11A12L16X150C0NU: RNCC: 3 | RNVC: 2
111105188: RNCC: 5 | RNVC: 2
5000165743: RNCC: 5 | RNVC: 2
5005030192: RNCC: 5 | RNVC: 2
5000165743: RNCC: 5 | RNVC: 9

1 Sep 1981

4730-14-357-8809
Tube Tee

143578809
47-6NU: RNCC: 3 | RNVC: 2

20 Jul 1979

4730-14-515-1033
Tube-Pipe Fitting Kit

145151033
526465-80: RNCC: 3 | RNVC: 2

7 Jul 1999

4730-14-449-4330
Tube-Pipe Fitting Kit

144494330
29779741: RNCC: 3 | RNVC: 9

13 Aug 1991

4730-14-462-4014
Fluid Pressure Line Multiple Connector

144624014
800020: RNCC: 3 | RNVC: 2

15 Apr 1993

4730-14-527-4058
Tube To Boss Straight Adapter

145274058
N102866H: RNCC: 3 | RNVC: 2

24 Oct 2001

4730-14-568-9749
Swivel Flange To Hose Straight Adapter

145689749
ETS1520: RNCC: 3 | RNVC: 2

25 Jul 2011

4730-14-240-7516
Raccord Femelle Ens

142407516
0507052: RNCC: 3 | RNVC: 2
50RY46: RNCC: 5 | RNVC: 2
FOE0507052: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-543-8331
Tube To Boss Straight Adapter

145438331
560503232: RNCC: 3 | RNVC: 2

11 Dec 2004

4730-14-396-1190
Fluid Pressure Line Multiple Connector

143961190
476345R: RNCC: 3 | RNVC: 2

27 Nov 1984

4730-14-422-0682
Fuel Feeder Manifold

144220682
8833: RNCC: 3 | RNVC: 2

22 Feb 1988

4730-14-214-5213
Tube Coupling Inverted Nut

142145213
R5416: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-450-5920
Bossage Oblique

144505920
DLT082701: RNCC: 3 | RNVC: 2

14 Oct 1991

4730-14-381-0413

4730-14-557-8795
Tube Elbow

145578795
EW16SOMDCF: RNCC: 3 | RNVC: 2
A231004000164: RNCC: 5 | RNVC: 2

24 Jul 2008

4730-14-516-4209
Union Pour Tube

4730-14-518-9398
Tu Droit Adaptateur

4730-14-444-0847
Raccord Pour Tuyau

4730-14-332-2580

4730-14-370-2623

4730-14-287-0552
Pipe Flange

142870552
RUAN7625M121P28: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-220-6139
Tube Tee

142206139
R12X8X12S: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-494-9768
Fluid Passage Bolt

144949768
5000683651: RNCC: 3 | RNVC: 2
F300 0T 018 1351: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-508-5587
Exhaust-Intake Pneumatic Muffler

145085587
27401: RNCC: 3 | RNVC: 2

16 Sep 1998

4730-14-508-7187
Pipe Flange

145087187
10445695: RNCC: 3 | RNVC: 2

29 Sep 1998

4730-14-438-5199
Hose Coupling Assembly

144385199
DA2C729002630: RNCC: 3 | RNVC: 2

21 Mar 1990

4730-14-263-7332

4730-14-032-1520
Bloc De Presertissa

140321520
FM10L: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-576-0910
Bulkhead Hose Connector

145760910
RA1B527003021A1: RNCC: 3 | RNVC: 2

29 May 2013

4730-14-337-3964

4730-14-321-7610

4730-14-577-4948
Hose Tee

145774948
3604 04 00: RNCC: 3 | RNVC: 2

19 Sep 2013

4730-14-575-7817
Flange To Tube Elbow

145757817
M2811350900000: RNCC: 3 | RNVC: 2

30 Apr 2013

4730-14-394-2538
Tube To Boss Straight Adapter

143942538
229007: RNCC: 3 | RNVC: 2
Q88GA14-1/4NPTS: RNCC: 5 | RNVC: 2

23 Jun 1984

4730-14-302-0243
Bulkhead Hose Connector

143020243
A10-14-165-13-0: RNCC: 3 | RNVC: 2
A10-14-165-13-0: RNCC: 5 | RNVC: 2
A10-14-165-13-0: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-461-2411
Tube To Boss Straight Adapter

144612411
610-258-002-0: RNCC: 3 | RNVC: 2

3 Mar 1993

4730-14-437-3616
Purgeur D Rechanges

144373616
8970116: RNCC: 3 | RNVC: 2
KR-PA/D782N: RNCC: 3 | RNVC: 9
KM-PA/Q1167: RNCC: 5 | RNVC: 9
KM-PA/Q1167A: RNCC: 5 | RNVC: 9

31 Jan 1990

4730-14-425-0003
Fluid Flow Restrictor

144250003
0319300170: RNCC: 3 | RNVC: 2
89414584: RNCC: 5 | RNVC: 2

16 Jun 1988

4730-14-325-6798
Bulkhead Hose Connector

143256798
0000364970: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-268-6427

4730-14-504-7370
Coude Special

145047370
B3051FQ006F21A: RNCC: 3 | RNVC: 2

2 Mar 1998

4730-14-339-8997
Bulkhead Hose Connector

143398997
0-3761P32A: RNCC: 3 | RNVC: 2
0-3761P32A: RNCC: 5 | RNVC: 9
85-688-9415: RNCC: 6 | RNVC: 9

18 Jan 1977

4730-14-449-5436
Tube Coupling

144495436
EMBOUT A SOUDER EM L17,2: RNCC: 3 | RNVC: 2
BN329-507: RNCC: 5 | RNVC: 2

26 Aug 1991

4730-14-365-9219
Tube-Hose Fitting Compression Sleeve

143659219
S2749CF: RNCC: 3 | RNVC: 2

4 Nov 1980

4730-14-230-6057

4730-14-226-6729

4730-14-565-3886
Hose Elbow

145653886
5005130500: RNCC: 1 | RNVC: 2
98301501: RNCC: 3 | RNVC: 2
20779386: RNCC: 5 | RNVC: 2

12 Aug 2010

4730-14-243-2734

4730-14-301-5327

4730-14-423-4497
Pipe Flange

144234497
UA50088006PN50-11B2SDN250: RNCC: 2 | RNVC: 2
4730HCPN50DN25011B2S: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-379-3247
Fluid Passage Bolt

143793247
702A10-0074-20: RNCC: 3 | RNVC: 2
702A-10-0074-20: RNCC: 5 | RNVC: 2

6 Sep 1982

4730-14-484-9975
Pipe To Tube Straight Adapter

144849975
U1778-N43-24-241: RNCC: 3 | RNVC: 2
N43-24-241: RNCC: 5 | RNVC: 2

19 Dec 1996

4730-14-484-9948
Pipe To Tube Straight Adapter

144849948
U1778-N43-32-165: RNCC: 3 | RNVC: 2
N43-32-165: RNCC: 5 | RNVC: 2

19 Dec 1996

4730-14-575-4529
Tube Tee

145754529
D225 05B: RNCC: 3 | RNVC: 2

8 Apr 2013

4730-14-438-2425
Raccord Support

144382425
D55524: RNCC: 3 | RNVC: 2
D55524: RNCC: 5 | RNVC: 2

7 Mar 1990

4730-14-354-0951

4730-14-562-9188
Hose Coupling

145629188
90862113: RNCC: 3 | RNVC: 2

4 Dec 2009

4730-14-365-9205

4730-14-369-6126

4730-14-329-0905

4730-14-276-2099
Porte-Joint Complet

142762099
6784-1DN38A: RNCC: 2 | RNVC: 2
6784-1DN38A: RNCC: 3 | RNVC: 2
2385608U0000038: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-423-4494
Pipe Flange

144234494
UA50088006PN50-11B2SDN150: RNCC: 2 | RNVC: 2
4730HCPN50DN15011B2S: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-372-2886
Fluid Passage Bolt

143722886
109513214: RNCC: 3 | RNVC: 2
0120-163: RNCC: 5 | RNVC: 2
109513214: RNCC: 5 | RNVC: 2

1 Sep 1981

4730-14-387-5161
Fluid Passage Bolt

143875161
C3295-107F15: RNCC: 3 | RNVC: 2

15 Sep 1983

4730-14-401-3179
Self-Sealing Coupling Assembly

144013179
N003-243-76: RNCC: 3 | RNVC: 2

5 Jun 1985

4730-14-420-1148
Tube-Hose Fitting Compression Sleeve

144201148
10016-008: RNCC: 3 | RNVC: 2

18 Nov 1987

4730-14-291-0355
Threaded Tube Fitting Plug

142910355
NO PRIMARY REF14-291-0355: RNCC: 3 | RNVC: 2
33655: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-364-0974
Tube To Boss Straight Adapter

143640974
366A52-1066-20: RNCC: 3 | RNVC: 2

7 Aug 1980

4730-14-377-2570
Bulkhead Hose Connector

143772570
366A58-1013-20: RNCC: 3 | RNVC: 2

21 Mar 1996

4730-14-517-8397
Valve Adapter Assembly

145178397
3L94-183: RNCC: 3 | RNVC: 2

13 Jan 2000

4730-14-335-7971
Tube To Boss Straight Adapter

143357971
341A55-1118-20: RNCC: 3 | RNVC: 2

30 Jun 1976

4730-14-370-7762
Tube Coupling Assembly

143707762
59-13-1166M01: RNCC: 3 | RNVC: 2
59-13-1166M01: RNCC: 5 | RNVC: 2
5000610316: RNCC: 5 | RNVC: 2
59-13-1166M01: RNCC: 5 | RNVC: 2
5000610316: RNCC: 6 | RNVC: 9

5 Jun 1981

4730-14-430-3832
Tube To Boss Straight Adapter

144303832
0177-01-05-03: RNCC: 3 | RNVC: 2

15 Mar 1989

4730-14-387-3674
Tube Tee

143873674
0294201830: RNCC: 3 | RNVC: 2
302-283-601P: RNCC: 5 | RNVC: 2

15 Sep 1983

4730-14-501-2364
Tube To Boss Straight Adapter

145012364
471.133: RNCC: 3 | RNVC: 2
471-133: RNCC: 3 | RNVC: 2
F300 0T 025 2769: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-482-6043
Hose To Gas Fitting Straight Adapter

144826043
GA70940-0608: RNCC: 3 | RNVC: 2

18 Jul 1996

4730-14-449-7639
Tube Coupling

144497639
BN324-620DN65: RNCC: 2 | RNVC: 2

6 Sep 1991

4730-14-425-7725
Tube Coupling

144257725
DHS613-618-02: RNCC: 3 | RNVC: 2

21 Jul 1988

4730-14-522-7741
Quick Disconnect Coupling Half

145227741
RBE03-1100/IC/JE: RNCC: 3 | RNVC: 2
91787882: RNCC: 5 | RNVC: 2

22 Nov 2000

4730-14-321-5857
Pipe Flange

143215857
7067E216GAMMM11CU-AL9NI3FE2: RNCC: 2 | RNVC: 2
7067E216C337CL2: RNCC: 5 | RNVC: 9
7067E216: RNCC: 5 | RNVC: 9
7067E216GAMMM12CU-AL9NI3FE2: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-489-2580
Pipe Flange

144892580
SIP57GV-STBR1-F9A/FEMELLE: RNCC: 3 | RNVC: 2
SIP57GV-STBR1A/BRIDE FEMELLE: RNCC: 5 | RNVC: 2

9 Jul 1997

4730-14-298-4681
Tube Fitting Brazing Ferrule

142984681
GSM163-011F7-1V: RNCC: 3 | RNVC: 2
GSM163-11-1V: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-505-3113
Tube Union

145053113
EGE12LMEDA3C: RNCC: 3 | RNVC: 2
EGE12LMEDA3C: RNCC: 3 | RNVC: 9
EGE12-LM-ED: RNCC: 5 | RNVC: 9
EGE12-LM-EDA3C: RNCC: 5 | RNVC: 9

18 Mar 1998

4730-14-401-7561
Pipe Flange

144017561
NO PRIMARY REF14-401-7561: RNCC: 3 | RNVC: 2
EA10N5AD: RNCC: 5 | RNVC: 9

13 Jun 1985

4730-14-563-6165
Tube Outlet

145636165
ABS1365-24-16B2: RNCC: 1 | RNVC: 2
D261-24-16B: RNCC: 3 | RNVC: 2
ABS1365-24-16B2: RNCC: 5 | RNVC: 9

1 Mar 2010

4730-14-510-2628
Tube-Pipe Fitting Kit

145102628
143E80-07-953: RNCC: 3 | RNVC: 2
4730AA8017781: RNCC: 6 | RNVC: 9

4 Nov 1998

4730-14-406-7186
Tube To Boss Straight Adapter

144067186
GE6-16SMED: RNCC: 3 | RNVC: 2
GE6-16SMED: RNCC: 5 | RNVC: 2

8 Jan 1986

4730-14-495-3884
Tube To Boss Straight Adapter

144953884
H12372-46: RNCC: 3 | RNVC: 2
F300 0T 019 1813: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-398-2066
Tube Tee

143982066
304-055-601-0: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-556-7135
Tube Outlet

145567135
36-0501-1025-01: RNCC: 3 | RNVC: 2
91878794: RNCC: 5 | RNVC: 2

7 Apr 2008

4730-14-389-7823
Tube To Boss Straight Adapter

143897823
UMSI12M1/2BSPT: RNCC: 3 | RNVC: 9

20 Dec 1983

4730-14-354-7743
Tube Tee

143547743
61199: RNCC: 3 | RNVC: 2

20 Feb 1979

4730-14-491-6083
Tube To Boss Straight Adapter

144916083
01-311: RNCC: 3 | RNVC: 2
F300 0T 003 5995: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-509-6739
Flange To Tube Straight Adapter

145096739
RA1M522404291: RNCC: 3 | RNVC: 2

28 Oct 1998

4730-14-508-5684
Tube Coupling Assembly

145085684
74R287SM: RNCC: 3 | RNVC: 2

16 Sep 1998

4730-14-548-5351
Lubricant Pressure Relief Fitting

145485351
VA4246: RNCC: 3 | RNVC: 2
91792115: RNCC: 5 | RNVC: 2

25 Jan 2006

4730-14-266-8883
Tube To Boss Straight Adapter

142668883
R110946: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-542-7750
Tube Coupling

145427750
719093: RNCC: 3 | RNVC: 2

14 Aug 2004

4730-14-420-0472
Tube To Hose Straight Adapter

144200472
GE08LLRA3C: RNCC: 3 | RNVC: 2
GE08LLRA3C: RNCC: 3 | RNVC: 9
GE8LLR: RNCC: 5 | RNVC: 2
GE8LLR: RNCC: 5 | RNVC: 9
GE8LLR: RNCC: 5 | RNVC: 9

18 Nov 1987

4730-14-374-8661
Tube To Boss Straight Adapter

143748661
4110-941: RNCC: 3 | RNVC: 2

30 Jan 1982

4730-14-559-1426
Tube To Hose Elbow

145591426
00 951 06 06: RNCC: 3 | RNVC: 2

10 Dec 2008

4730-14-369-8335
Tube To Boss Straight Adapter

143698335
16558748: RNCC: 3 | RNVC: 2
16558748: RNCC: 5 | RNVC: 9

18 May 1981

4730-14-262-1733

4730-14-403-5148
Self-Sealing Coupling Assembly

144035148
N00322176: RNCC: 3 | RNVC: 2

21 Aug 1985

4730-14-203-6445

4730-14-386-8481

4730-14-568-9363
Tube Elbow

145689363
CLS22: RNCC: 3 | RNVC: 2

21 Jul 2011

4730-14-414-5470
Intermediai Raccord

144145470
529020: RNCC: 3 | RNVC: 2

11 Feb 1987

4730-14-299-9599

4730-14-344-5069

4730-14-505-3638
Bulkhead Hose Connector

145053638
Y7806087: RNCC: 3 | RNVC: 2

18 Mar 1998

4730-14-453-0744
Swivel Retaining Pipe Flange

144530744
15031650A: RNCC: 3 | RNVC: 2

4 Feb 1992

4730-14-209-1209
Raccordsouple Equi

142091209
AF32-120-4X: RNCC: 3 | RNVC: 2
HBT10DN32: RNCC: 5 | RNVC: 1
HBT90DN32: RNCC: 5 | RNVC: 2
506-32SC: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-267-3935
Fluid Pressure Line Multiple Connector

142673935
612-18-90TJBR: RNCC: 3 | RNVC: 2
9567141812: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-529-5878
Return Tube Bend

145295878
330A72-6760-25: RNCC: 3 | RNVC: 2

29 Mar 2002

4730-14-367-7860

4730-14-041-3814
Raccord Droit Tourn

140413814
8MC: RNCC: 3 | RNVC: 9

1 Jan 1974

4730-14-577-1285
Pipe Nipple

145771285
501720: RNCC: 3 | RNVC: 2
717136: RNCC: 5 | RNVC: 2
501720: RNCC: 5 | RNVC: 2

12 Aug 2013

4730-14-577-3801
Quick Disconnect Coupling Assembly

145773801
CVK16N: RNCC: 3 | RNVC: 2

11 Sep 2013

4730-14-404-3900
Fluid Passage Bolt

144043900
3119360: RNCC: 3 | RNVC: 2

30 Oct 1985

4730-14-293-3730

4730-14-565-3802
Tube Tee

145653802
EL25SOMDCF: RNCC: 3 | RNVC: 2
A231004000424: RNCC: 5 | RNVC: 2

11 Aug 2010

4730-14-338-4109
Raccord Avec Clapet

143384109
155906M: RNCC: 3 | RNVC: 2

6 Nov 1976

4730-14-246-7164

4730-14-262-7435

4730-14-360-3763
Collecteur Arriere

143603763
0308857690: RNCC: 3 | RNVC: 2

23 Nov 1979

4730-14-506-2814
Quick Disconnect Coupling Half

145062814
DPB180-01: RNCC: 3 | RNVC: 2
DPB180-01: RNCC: 5 | RNVC: 2
444-00246-100: RNCC: 5 | RNVC: 2

20 Apr 1998

4730-14-325-1708
Quick Disconnect Coupling Half

143251708
RBE11-1103: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-242-7977
Tube Tee

142427977
NG40901-4APL50N0M1: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-407-4279
Tube To Boss Straight Adapter

144074279
12-38-48X200: RNCC: 3 | RNVC: 2
UMA38X48-200N: RNCC: 3 | RNVC: 2

12 Feb 1986

4730-14-387-8591
Tube To Boss Straight Adapter

143878591
NO PRIMARY REF14-387-8591: RNCC: 3 | RNVC: 2
0026-151DN32: RNCC: 5 | RNVC: 9

12 Oct 1983

4730-14-229-5821
Raccord Souple Spec

142295821
AF5180-8-60-2CS5AX: RNCC: 3 | RNVC: 2
A8C: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-330-8795
Tube To Boss Straight Adapter

143308795
91011070: RNCC: 3 | RNVC: 2
VDP7351: RNCC: 5 | RNVC: 2
A1-10-14-125: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-494-0343
Contre-Ecrou

144940343
NO PRIMARY REF14-494-0343: RNCC: 3 | RNVC: 2
DAV2879: RNCC: 5 | RNVC: 9
F300 0T 015 1006: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-252-2879
Sediment Strainer Element

142522879
NO PRIMARY REF14-252-2879: RNCC: 3 | RNVC: 2
59295A: RNCC: 5 | RNVC: 9
59295A: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-268-1188
Pipe Flange

142681188
6784-1DD63: RNCC: 2 | RNVC: 2
MEC11410: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-567-0522
Straight Tubing Connector

145670522
NO PRIMARY REF 14-567-0522: RNCC: 3 | RNVC: 2
10074RXRF50: RNCC: 5 | RNVC: 2

2 Feb 2011

4730-14-256-6023
Tube Union

142566023
NO PRIMARY REF14-256-6023: RNCC: 3 | RNVC: 2
100473-3: RNCC: 5 | RNVC: 9

1 Jan 1969

4730-14-429-6815
Fluid Pressure Line Multiple Connector

144296815
157624: RNCC: 3 | RNVC: 2

8 Feb 1989

4730-14-325-8888
Pipe Flange

143258888
AS34TV107REP5: RNCC: 3 | RNVC: 9

2 Jul 1975

4730-14-518-3542
Tube To Boss Straight Adapter

145183542
RTL2: RNCC: 3 | RNVC: 9

2 Feb 2000

4730-14-484-7064
Tube Tee

144847064
2441: RNCC: 3 | RNVC: 2

4 Dec 1996

4730-14-542-1982
Tube To Boss Straight Adapter

145421982
474030508: RNCC: 3 | RNVC: 2
474030508: RNCC: 5 | RNVC: 9

8 Jul 2004

4730-14-370-7002
Quick Disconnect Plug

143707002
410994: RNCC: 3 | RNVC: 9

5 Jun 1981

4730-14-515-4397
Tube To Boss Straight Adapter

145154397
90MJ916M14BSPT: RNCC: 3 | RNVC: 2
SOA90MJ916M14BSPT: RNCC: 5 | RNVC: 9

13 Jul 1999

4730-14-238-9328
Tube To Boss Straight Adapter

142389328
509P402: RNCC: 3 | RNVC: 2
50902: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-418-0001
Hose To Boss Straight Adapter

144180001
VDP5062: RNCC: 3 | RNVC: 2

6 Aug 1987

4730-14-348-1287
Sediment Strainer Element

143481287
A11A722206010: RNCC: 3 | RNVC: 2

29 Mar 1978

4730-14-550-3059
Sediment Strainer Element

145503059
AL5191: RNCC: 3 | RNVC: 2

15 Jun 2006

4730-14-270-0119
Tube-Hose Fitting Compression Sleeve

142700119
7062CE1F5B30Z10CNT18-10: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-500-6250
Tube To Boss Straight Adapter

145006250
VKA3-22LOMDA3C: RNCC: 3 | RNVC: 2
VKA3-22L0MDKA3C: RNCC: 5 | RNVC: 2
VKA3-22-L0MDKA3C: RNCC: 5 | RNVC: 2
F300 0T 024 6434: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-221-5676
Bouchon Filete

142215676
A453-105A: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-334-0348
Tube Coupling

143340348
DLT023704: RNCC: 3 | RNVC: 2
376-076-7009: RNCC: 3 | RNVC: 2

23 Apr 1976

4730-14-362-3603
Pipe Flange

143623603
NO PRIMARY REF14-362-3603: RNCC: 3 | RNVC: 2
12352-520: RNCC: 5 | RNVC: 9

19 Mar 1980

4730-14-483-2316
Tube To Hose Straight Adapter

144832316
NO PRIMARY REF14-483-2316: RNCC: 3 | RNVC: 2
RD14: RNCC: 5 | RNVC: 2

28 Aug 1996

4730-14-300-6638
Fluid Pressure Line Multiple Connector

143006638
554-413-510FF1DET7: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-381-3950
Tube To Boss Straight Adapter

143813950
9159-4534: RNCC: 3 | RNVC: 2
SAF9159-4534: RNCC: 5 | RNVC: 9

25 Jan 1983

4730-14-557-5909
Sediment Strainer

145575909
ME96404A3F3FWDB: RNCC: 3 | RNVC: 2

25 Jun 2008

4730-14-360-0753
Rallonge De Valve

143600753
15035: RNCC: 3 | RNVC: 2
15035: RNCC: 5 | RNVC: 9

31 Oct 1979

4730-14-253-1707

4730-14-220-0512
Tube To Boss Straight Adapter

142200512
25301: RNCC: 3 | RNVC: 2
25301: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-348-8772
Fluid Passage Bolt

143488772
300-688-801P: RNCC: 3 | RNVC: 2
001394010A: RNCC: 5 | RNVC: 2

19 Apr 1978

4730-14-232-8864

4730-14-212-1230

4730-14-382-9843
Quick Disconnect Coupling Half

143829843
SBA8-7103VR: RNCC: 3 | RNVC: 2

17 Mar 1983

4730-14-362-1240
Pipe Flange

143621240
U1198F4-38Z2CND17-13: RNCC: 2 | RNVC: 2

20 Feb 1980

4730-14-387-2716
Pipe Flange

143872716
136-81-32000: RNCC: 3 | RNVC: 9

15 Sep 1983

4730-14-377-4604
Fluid Passage Bolt

143774604
NO PRIMARY REF14-377-4604: RNCC: 3 | RNVC: 2
24033REPB: RNCC: 5 | RNVC: 9
RE03-0073REPB: RNCC: 5 | RNVC: 9

17 May 1982

4730-14-346-7030
Bride Speciale

143467030
6784-1CL14: RNCC: 2 | RNVC: 2

12 Dec 1977

4730-14-365-9614

4730-14-288-3049

4730-14-428-9670
Douille

144289670
000202927800: RNCC: 3 | RNVC: 2

2 Jan 1989

4730-14-275-6964

4730-14-366-5980

4730-14-213-0003

4730-14-374-7774
Raccord Special

143747774
0000364210: RNCC: 3 | RNVC: 2

30 Jan 1982

4730-14-235-9606
Fluid Passage Bolt

142359606
45080XC38F: RNCC: 3 | RNVC: 9

1 Jan 1967

4730-14-230-9754
Pipe Flange

142309754
DLT002872: RNCC: 3 | RNVC: 2
DLT02872: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-376-7602
Fluid Passage Bolt

143767602
52S0601502: RNCC: 3 | RNVC: 2

28 Apr 1982

4730-14-395-3729
Tube Tee

143953729
N0189F12A: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-285-6717

4730-14-279-0519

4730-14-043-0628

4730-14-475-9753
Embout Bride Plane

144759753
MAT171-1982F17: RNCC: 3 | RNVC: 2

16 May 1995

4730-14-373-1701
Quick Disconnect Coupling Half

143731701
N00213376: RNCC: 3 | RNVC: 2
N002133-76: RNCC: 5 | RNVC: 2

21 Oct 1981

4730-14-269-1815
Pipe Flange

142691815
7066CC1M57: RNCC: 2 | RNVC: 2
4730BE-57M: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-475-7400
Tube Fitting Insert

144757400
ALZ999550000220: RNCC: 3 | RNVC: 2

27 Apr 1995

4730-14-032-1537
Pipe Flange

140321537
CMT30E9030AF3DE57REP3: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-449-4331
Tube-Pipe Fitting Kit

144494331
29779744: RNCC: 3 | RNVC: 9

13 Aug 1991

4730-14-503-2074
Tube Coupling

145032074
RP1A504263072: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-498-0113
Fluid Passage Bolt

144980113
2235715: RNCC: 3 | RNVC: 2
2235715: RNCC: 5 | RNVC: 2
F300 0T 001 5661: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-238-1772

4730-14-227-4654
Bride Speciale

142274654
DLT045087: RNCC: 3 | RNVC: 2
DLT45087: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-550-4278
Quick-Disconnect Nipple

145504278
FEM1001-16FB: RNCC: 3 | RNVC: 2
FEM1001-16FB: RNCC: 5 | RNVC: 2

20 Jun 2006

4730-14-515-8374
Fluid Flow Restrictor Unit

145158374
MAT164-0132F01-R-DPP00021: RNCC: 3 | RNVC: 2

16 Aug 1999

4730-14-575-9883
Pipe To Tube Straight Adapter

145759883
BESS DKO 12 SR 3/8 ED ZN FER NO-: RNCC: 3 | RNVC: 1
4833.700: RNCC: 5 | RNVC: 2
110810U: RNCC: 5 | RNVC: 2
Y00014169: RNCC: 5 | RNVC: 2

22 May 2013

4730-14-330-8796
Tube To Boss Straight Adapter

143308796
91411013: RNCC: 3 | RNVC: 2
A3P10-8-13: RNCC: 5 | RNVC: 9
A3P10-8X13: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-301-4876
Tube To Boss Straight Adapter

143014876
915-1-41-21: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-273-5082
Tube To Boss Straight Adapter

142735082
7062BB1RCET1-10C337A: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-339-9757
Bloc Mobile Chemise

143399757
GSM525-002F33: RNCC: 3 | RNVC: 2
GSM525-09F13: RNCC: 5 | RNVC: 2

18 Jan 1977

4730-14-256-9339
Pipe Flange

142569339
RUHB1-10: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-361-4373
Fluid Pressure Line Multiple Connector

143614373
B14CA1010-033: RNCC: 3 | RNVC: 2
B14CA1010-033: RNCC: 5 | RNVC: 2
B14CA1010-033: RNCC: 5 | RNVC: 9

24 Jan 1980

4730-14-220-5471
Tube To Boss Straight Adapter

142205471
G12X27-1BGGS: RNCC: 3 | RNVC: 2
0946674046: RNCC: 5 | RNVC: 2
0946674046: RNCC: 5 | RNVC: 9
946674046: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-531-7648
Hose To Gas Fitting Straight Adapter

145317648
3821006/FADH6: RNCC: 3 | RNVC: 2
3821006: RNCC: 5 | RNVC: 9

17 Sep 2002

4730-14-338-2502
Tube Fitting Brazing Ferrule

143382502
U1198F5-30UE8: RNCC: 2 | RNVC: 2
CN2: RNCC: 3 | RNVC: 2

6 Nov 1976

4730-14-351-0996
Tube Tee

143510996
NO PRIMARY REF14-351-0996: RNCC: 3 | RNVC: 2
DSVT10SR: RNCC: 5 | RNVC: 9

10 Aug 1978

4730-14-395-2224
Hose To Boss Straight Adapter

143952224
AF152-16/IC: RNCC: 3 | RNVC: 2
AF152-16IC: RNCC: 5 | RNVC: 2

2 Oct 1984

4730-14-497-9354
Diaphragme Non Usin

144979354
MAT178-0119F15: RNCC: 3 | RNVC: 2

28 Oct 1997

4730-14-464-9322
Raccords Ensemble

144649322
9970-133-091: RNCC: 3 | RNVC: 2

8 Sep 1993

4730-14-411-1884
Support Collecteur

144111884
332A75-2223-01: RNCC: 3 | RNVC: 2

6 Aug 1986

4730-14-299-1057
Boite A Purge Equip

142991057
121S77-108-00-0: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-373-0733
Manchette A Ponce V

143730733
7062JA1F2-36CUPR0ALU: RNCC: 3 | RNVC: 9

21 Sep 1981

4730-14-421-7229
Tube Tee

144217229
0301501340: RNCC: 3 | RNVC: 2

27 Jan 1988

4730-14-504-4850
Tube To Boss Straight Adapter

145044850
UM100510: RNCC: 3 | RNVC: 2
TR95937: RNCC: 5 | RNVC: 9

18 Feb 1998

4730-14-377-1768
Pipe Flange

143771768
888302668: RNCC: 3 | RNVC: 9
888302668: RNCC: 5 | RNVC: 2

17 May 1982

4730-14-493-0541
Tube To Boss Straight Adapter

144930541
2729448MI: RNCC: 3 | RNVC: 2
F300 0T 009 7508: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-482-3619
Quick Disconnect Coupling Half

144823619
AE85535Z: RNCC: 3 | RNVC: 2
AE85535Z: RNCC: 5 | RNVC: 9

9 Jul 1996

4730-14-335-5056
Fluid Passage Bolt

143355056
F10A740021: RNCC: 3 | RNVC: 2

30 Jun 1976

4730-14-230-6039
Tube To Boss Straight Adapter

142306039
111231: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-442-5057
Tube Coupling

144425057
20710930: RNCC: 3 | RNVC: 2

17 Oct 1990

4730-14-334-6455
Quick Disconnect Coupling Half

143346455
STH00831: RNCC: 3 | RNVC: 2
STH00831: RNCC: 5 | RNVC: 2

1 Jun 1976

4730-14-434-7256
Tube Fitting Flared Sleeve

144347256
BN324595DN80AC: RNCC: 3 | RNVC: 2

3 Oct 1989

4730-14-311-8066

4730-14-226-8788

4730-14-233-8748
Bague Speciale

142338748
86512: RNCC: 3 | RNVC: 2
9567158310: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-424-4595
Tube To Boss Straight Adapter

144244595
PZCF168: RNCC: 3 | RNVC: 2

19 May 1988

4730-14-358-5329
Tube To Boss Straight Adapter

143585329
5000498342: RNCC: 3 | RNVC: 2
5000498342: RNCC: 5 | RNVC: 9

7 Sep 1979

4730-14-536-0444
Bulkhead Hose Connector

145360444
PE65001D18: RNCC: 3 | RNVC: 2

9 Jul 2003

4730-14-363-6700
Pipe Flange

143636700
H1078SP1PL3A: RNCC: 3 | RNVC: 2

6 Jul 1980

4730-14-321-5006
Pipe Flange

143215006
C11339B: RNCC: 3 | RNVC: 2
C11339: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-298-1643
Fluid Pressure Line Multiple Connector

142981643
0000301340: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-372-2190
Lubrication Fitting

143722190
9214501: RNCC: 3 | RNVC: 9

1 Sep 1981

4730-14-476-7041
Pipe Flange

144767041
101160611031: RNCC: 3 | RNVC: 2

28 Jun 1995

4730-14-503-3306
Fluid Pressure Line Multiple Connector

145033306
107024003301: RNCC: 3 | RNVC: 2
107024003301: RNCC: 5 | RNVC: 2

9 Jan 1998

4730-14-462-5945
Threaded Tube Fitting Plug

144625945
F001718: RNCC: 3 | RNVC: 9

28 Apr 1993

4730-14-504-4859
Tube To Boss Straight Adapter

145044859
UM121217: RNCC: 3 | RNVC: 2
TR95952: RNCC: 5 | RNVC: 9

18 Feb 1998

4730-14-362-1238
Pipe Flange

143621238
U1198F4-25Z2CND17-13: RNCC: 2 | RNVC: 2

20 Feb 1980

4730-14-505-5831
Tube To Boss Straight Adapter

145055831
4A12-16X150NU: RNCC: 3 | RNVC: 9

26 Mar 1998

4730-14-361-7911
Tube To Boss Swivel Joint

143617911
556165-00: RNCC: 3 | RNVC: 2
SOG556165-00: RNCC: 5 | RNVC: 9

20 Feb 1980

4730-14-522-6848
Tube Union

145226848
721-914-207: RNCC: 3 | RNVC: 2
CAE00988: RNCC: 5 | RNVC: 2

15 Nov 2000

4730-14-349-3113
Gicleur Inf Support

143493113
T20-13A1085: RNCC: 3 | RNVC: 2

22 May 1978

4730-14-337-4661
Bulkhead Hose Connector

143374661
SP3-01-09-01: RNCC: 3 | RNVC: 2

7 Oct 1976

4730-14-370-3862
Tube Fitting Brazing Ferrule

143703862
BN320-513CREP11: RNCC: 3 | RNVC: 2

18 May 1981

4730-14-471-7103
Bulkhead Hose Connector

144717103
LN327-01514DN50: RNCC: 3 | RNVC: 2

13 Sep 1994

4730-14-393-4010
Quick Disconnect Coupling Half

143934010
N010-109-81: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-549-8099
Fluid Flow Restrictor

145498099
MAT523-3026F10: RNCC: 3 | RNVC: 2

15 May 2006

4730-14-346-7126
Pipe-Tube Escutcheon

143467126
6784-1EB80A: RNCC: 2 | RNVC: 2

12 Dec 1977

4730-14-352-2929
Self-Sealing Coupling Half

143522929
103647-00226: RNCC: 3 | RNVC: 2
103647-00219: RNCC: 5 | RNVC: 2

16 Oct 1978

4730-14-327-8323
Pipe Expansion Joint

143278323
307-231-32-25-60: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-513-5849
Bulkhead Hose Connector

145135849
704A42-110-037: RNCC: 1 | RNVC: 2
19290263: RNCC: 3 | RNVC: 2

24 Mar 1999

4730-14-561-9470
Tube Coupling Body

145619470
CR490133: RNCC: 3 | RNVC: 2

18 Sep 2009

4730-14-496-3498
Tube To Boss Straight Adapter

144963498
174552: RNCC: 3 | RNVC: 2
F300 0T 021 4236: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-365-2837

4730-14-381-0415

4730-14-282-4802

4730-14-488-8925
Tube Coupling

144888925
2527.082 196: RNCC: 3 | RNVC: 2
F300 0T 023 5999: RNCC: 6 | RNVC: 9

11 Jun 1997

4730-14-450-9943
Flange To Tube Straight Adapter

144509943
MY20522110G02: RNCC: 3 | RNVC: 2

23 Oct 1991

4730-14-032-2742
Threaded Tube Fitting Plug

140322742
00580000106339A: RNCC: 3 | RNVC: 2

17 May 1982

4730-14-458-6469
Quick-Disconnect Nipple

144586469
5000674552: RNCC: 3 | RNVC: 2

29 Oct 1992

4730-14-361-8537

4730-14-514-7933
Tube Tee

145147933
TSL 6: RNCC: 3 | RNVC: 9

16 Jun 1999

4730-14-214-9418
Raccord Flexible Sp

142149418
300151S25A: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-365-9781

4730-14-514-1734
Tube Fitting Locknut

145141734
15261-5437-0: RNCC: 3 | RNVC: 2

28 Apr 1999

4730-14-339-1582
Tube Tee

143391582
31030413: RNCC: 3 | RNVC: 2

16 Dec 1976

4730-14-296-6846

4730-14-561-9871
Pipe Flange

145619871
R987092668+R987092683: RNCC: 3 | RNVC: 2

22 Sep 2009

4730-14-568-7121
Quick Disconnect Coupling Half

145687121
80/9405080: RNCC: 3 | RNVC: 2

29 Jun 2011

4730-14-422-7577
Tube To Boss Straight Adapter

144227577
GE10PL1-4NPT: RNCC: 3 | RNVC: 2
91690881: RNCC: 5 | RNVC: 2

17 Mar 1988

4730-14-379-8315
Tube To Boss Straight Adapter

143798315
2700-22: RNCC: 3 | RNVC: 2

20 Oct 1982

4730-14-531-9284
Special-Shaped Hose Clamp

145319284
2310-08346: RNCC: 3 | RNVC: 2

25 Sep 2002

4730-14-508-7363
Tube To Boss Straight Adapter

145087363
MAT164-0311F1: RNCC: 3 | RNVC: 2

30 Sep 1998

4730-14-399-6558
Tube To Boss Straight Adapter

143996558
52-30-36X150: RNCC: 3 | RNVC: 2

6 Mar 1985

4730-14-305-4506
Fluid Pressure Line Multiple Connector

143054506
F781-006: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-495-2229
Fluid Passage Bolt

144952229
NO PRIMARY REF14-495-2229: RNCC: 3 | RNVC: 2
1000673: RNCC: 5 | RNVC: 9
F300 0T 018 6612: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-553-0186
Pipe Flange

145530186
GC3425-20: RNCC: 3 | RNVC: 2

23 Feb 2007

4730-14-402-0695
Bulkhead Hose Connector

144020695
SMA15R1-2P: RNCC: 3 | RNVC: 2

26 Jun 1985

4730-14-312-7576
Tube To Boss Straight Adapter

143127576
GSM164-040F10: RNCC: 3 | RNVC: 2
411MA792REP3: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-305-6256
Tube Tee

143056256
9104270047: RNCC: 3 | RNVC: 2
I7-27: RNCC: 5 | RNVC: 9
I7-27HP: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-564-7177
Pipe Nipple

145647177
A500707-04-06: RNCC: 3 | RNVC: 2

28 May 2010

4730-14-461-2492
Hose Coupling Assembly

144612492
BC100A010-102: RNCC: 3 | RNVC: 9
0221991S00: RNCC: 5 | RNVC: 2

3 Mar 1993

4730-14-338-8719
Tube To Boss Straight Adapter

143388719
NO PRIMARY REF14-338-8719: RNCC: 3 | RNVC: 2
3942-30A: RNCC: 5 | RNVC: 9

17 Dec 1976

4730-14-494-4607
Tube To Boss Straight Adapter

144944607
MAV1-4MA3: RNCC: 3 | RNVC: 2
F300 0T 017 3605: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-209-1259
Raccord Orientable

142091259
NO PRIMARY REF14-209-1259: RNCC: 3 | RNVC: 2
204100: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-478-2104
Quick Disconnect Coupling Half

144782104
RBE11-1152/OD/IC/6/VS/FB: RNCC: 3 | RNVC: 2
91729040: RNCC: 5 | RNVC: 2

18 Oct 1995

4730-14-260-9129
Pipe Flange

142609129
7062CB1F1-66AF42-2: RNCC: 2 | RNVC: 2
4730CD-66: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-364-0495
Support Collecteur

143640495
365A75-2210-00: RNCC: 3 | RNVC: 2

7 Aug 1980

4730-14-310-5600

4730-14-314-1754

4730-14-367-7181

4730-14-507-9007
Tube To Boss Straight Adapter

145079007
UMM22X150CO: RNCC: 3 | RNVC: 2
896L33180: RNCC: 5 | RNVC: 2
5005030749: RNCC: 5 | RNVC: 2

26 Aug 1998

4730-14-529-4147
Fluid Pressure Line Multiple Connector

145294147
10477042: RNCC: 3 | RNVC: 2

29 Mar 2002

4730-14-329-4269
Swivel Retaining Pipe Flange

143294269
523939: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-538-7874
Tube Coupling Assembly

145387874
NGM0011040382526: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-525-6320
Tube Tee

145256320
20 236 914 1120: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-574-5679
Exhaust-Intake Pneumatic Muffler

145745679
0855 00 17: RNCC: 3 | RNVC: 2

31 Jan 2013

4730-14-260-9205

4730-14-260-9319

4730-14-290-9495

4730-14-359-6256
Quick Disconnect Coupling Half

143596256
00995919900: RNCC: 3 | RNVC: 2
9959199: RNCC: 5 | RNVC: 2
VDP7580: RNCC: 5 | RNVC: 2

15 Oct 1979

4730-14-512-7891
Tube Coupling

145127891
109658: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-407-9978
Quick Disconnect Coupling Half

144079978
FD4249: RNCC: 3 | RNVC: 2

19 Mar 1986

4730-14-554-5949
Tube Fitting Insert

145545949
0000510100: RNCC: 3 | RNVC: 2

23 Jul 2007

4730-14-388-7161
Tube To Boss Straight Adapter

143887161
1077597: RNCC: 3 | RNVC: 2
1077597: RNCC: 5 | RNVC: 2
1077597: RNCC: 5 | RNVC: 2

3 Nov 1983

4730-14-450-7209
Tube To Boss Straight Adapter

144507209
0150096337A016: RNCC: 3 | RNVC: 2
0150096337A016: RNCC: 3 | RNVC: 9
15-16-96: RNCC: 5 | RNVC: 9

16 Oct 1991

4730-14-367-4270
Pipe Flange

143674270
15176877: RNCC: 3 | RNVC: 2
15176877: RNCC: 5 | RNVC: 2
15176877: RNCC: 5 | RNVC: 9

11 Dec 1980

4730-14-478-0115
Tube Coupling

144780115
89058: RNCC: 3 | RNVC: 9
Z00.N7730529178: RNCC: 5 | RNVC: 2
Z00.N7730529178TBM: RNCC: 5 | RNVC: 9

4 Oct 1995

4730-14-314-3419
Tube To Boss Straight Adapter

143143419
180767: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-379-3016
Pipe Expansion Joint

143793016
26442905200: RNCC: 3 | RNVC: 2
N55286: RNCC: 5 | RNVC: 9
264429052: RNCC: 5 | RNVC: 9

6 Sep 1982

4730-14-322-2108

4730-14-312-2774

4730-14-316-8180
Corps De Clapet

143168180
536MF14DET1: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-333-5269
Bloc Raccordement

143335269
A0191-003F6: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-286-1805
Union Simple

142861805
Q1G12-21-21X27: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-525-6278
Tube Union

145256278
236-911-0090: RNCC: 3 | RNVC: 2
20 236 911 0090: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-314-8679

4730-14-301-8586

4730-14-212-7955

4730-14-576-7176
Tube To Boss Straight Adapter

145767176
10560723000: RNCC: 3 | RNVC: 1

5 Jul 2013

4730-14-353-0167
Obturateur

143530167
300F16U: RNCC: 3 | RNVC: 2

14 Nov 1978

4730-14-262-9905
Support De Crepine

142629905
DLT000438: RNCC: 3 | RNVC: 2
DLT00438: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-208-6344

4730-14-214-5219

4730-14-356-6867

4730-14-375-5067
Bouchon De Raccorde

143755067
130-5-21: RNCC: 3 | RNVC: 2

26 Feb 1982

4730-14-362-9342
Tube To Boss Straight Adapter

143629342
RU253-5M48P17: RNCC: 3 | RNVC: 2
253-5M48P17: RNCC: 5 | RNVC: 2

19 Mar 1980

4730-14-210-6863
Fluid Passage Bolt

142106863
17L8/10X100: RNCC: 3 | RNVC: 2
0000290929: RNCC: 3 | RNVC: 2
217404123: RNCC: 5 | RNVC: 2
5000930917: RNCC: 5 | RNVC: 2
0000290929: RNCC: 5 | RNVC: 9
290929: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-430-3103
Pipe Fitting Assortment

144303103
7511 111 36091: RNCC: 3 | RNVC: 2
89410112: RNCC: 5 | RNVC: 2
7511-111-36091: RNCC: 5 | RNVC: 2

15 Mar 1989

4730-14-399-4876
Fluid Passage Bolt

143994876
12120354: RNCC: 3 | RNVC: 2
12012-12812: RNCC: 5 | RNVC: 9
12120354: RNCC: 5 | RNVC: 9

10 Jan 1997

4730-14-498-9389
Fluid Pressure Line Multiple Connector

144989389
MR6797-1C: RNCC: 3 | RNVC: 9
5010054084: RNCC: 5 | RNVC: 2
F300 0T 013 2350: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-410-3244
Fluid Pressure Line Multiple Connector

144103244
332A75-2430-20: RNCC: 3 | RNVC: 2

18 Jun 1986

4730-14-513-5848
Bulkhead Hose Connector

145135848
704A42-110-036: RNCC: 1 | RNVC: 2
19290262: RNCC: 3 | RNVC: 2

24 Mar 1999

4730-14-349-0400
Fluid Pressure Line Multiple Connector

143490400
109-16-15-21: RNCC: 3 | RNVC: 2
13A16-15X21: RNCC: 3 | RNVC: 2

19 Apr 1978

4730-14-433-7907
Sediment Strainer Element

144337907
341A32-1400-01: RNCC: 3 | RNVC: 2

9 Aug 1989

4730-14-283-6229
Tube To Boss Straight Adapter

142836229
262-10-74142-02: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-465-9786
Pipeline Flexible Spacer

144659786
DILATOFLEX-NTMH-DN50PN16: RNCC: 3 | RNVC: 2

27 Oct 1993

4730-14-420-0105
Tube To Boss Straight Adapter

144200105
4A20-21-27CYL: RNCC: 3 | RNVC: 2
204101396: RNCC: 5 | RNVC: 2

17 Nov 1987

4730-14-510-1082
Self-Sealing Coupling Assembly

145101082
FIC97-73MT: RNCC: 3 | RNVC: 2
4220AA8006387: RNCC: 6 | RNVC: 9
FIC97-73MT: RNCC: 6 | RNVC: 9

4 Nov 1998

4730-14-345-1005

4730-14-465-7403
Bouchon Lisse Perce

144657403
MAT144-01-01: RNCC: 3 | RNVC: 2

14 Oct 1993

4730-14-222-6560
Tube Fitting Brazing Ferrule

142226560
GSM1297F1AF1BTABLEAU2D1-36I26: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-268-6303
Tube To Boss Straight Adapter

142686303
Q1-53-36-42X150: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-472-8803
Fluid Flow Restrictor Unit

144728803
332A52-1252-20: RNCC: 3 | RNVC: 2

16 Nov 1994

4730-14-353-1150
Tube Coupling

143531150
RC55-119: RNCC: 3 | RNVC: 2

8 Dec 1978

4730-14-308-8677
Fluid Passage Bolt

143088677
NO PRIMARY REF14-308-8677: RNCC: 3 | RNVC: 2
561459: RNCC: 5 | RNVC: 2
HNFA18: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-514-0318
Tube Fitting Brazing Ferrule

145140318
US3-68: RNCC: 3 | RNVC: 2

22 Apr 1999

4730-14-443-2796
Fluid Passage Bolt

144432796
0000280960: RNCC: 3 | RNVC: 2
85-694-3179: RNCC: 6 | RNVC: 9

14 Nov 1990

4730-14-455-6295
Tube Coupling

144556295
RCN20-16-21: RNCC: 3 | RNVC: 2

2 Jun 1992

4730-14-274-6936
Tube Tee

142746936
R10X6SX10: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-450-7369
Pipe Expansion Joint

144507369
52128013600: RNCC: 3 | RNVC: 2
59316102: RNCC: 5 | RNVC: 2

21 Oct 1991

4730-14-503-1748
Bulkhead Hose Connector

145031748
RA1M534303180: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-535-8185
Fluid Flow Restrictor

145358185
36402970: RNCC: 3 | RNVC: 2

25 Jun 2003

4730-14-336-7137
Fluid Pressure Line Multiple Connector

143367137
104608: RNCC: 3 | RNVC: 2

7 Oct 1976

4730-14-395-1891

4730-14-262-5749

4730-14-483-6779
Pipe Flange

144836779
38621026: RNCC: 3 | RNVC: 2

27 Sep 1996

4730-14-518-5085
Return Tube Bend

145185085
HCOXX000023: RNCC: 3 | RNVC: 9

9 Feb 2000

4730-14-329-2542
Fluid Pressure Line Multiple Connector

143292542
F10A781002001: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-376-6843
Quick Disconnect Coupling Assembly

143766843
HA0502000: RNCC: 3 | RNVC: 2

28 Apr 1982

4730-14-460-9483
Fluid Flow Restrictor

144609483
A81784: RNCC: 3 | RNVC: 2

17 Feb 1993

4730-14-348-1299
Bulkhead Hose Connector

143481299
A11A722109010: RNCC: 3 | RNVC: 2

29 Mar 1978

4730-14-286-1612
Pipeline Flexible Spacer

142861612
DILAT0FLEX25HHBRIDESN0NPERCEES: RNCC: 3 | RNVC: 9

1 Jan 1972

4730-14-213-1026
Fluid Passage Bolt

142131026
0067610160: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-493-5028
Tube To Boss Straight Adapter

144935028
5000786642: RNCC: 3 | RNVC: 2
F300 0T 013 3058: RNCC: 6 | RNVC: 9
5000786642: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-329-2805
Pipeline Flexible Spacer

143292805
I131NTE80STR: RNCC: 2 | RNVC: 2
DILNTE80STR: RNCC: 3 | RNVC: 9

2 Jul 1975

4730-14-571-9255
Lubrication Fitting

145719255
07019807: RNCC: 3 | RNVC: 2
07019807: RNCC: 3 | RNVC: 2
7019807: RNCC: 5 | RNVC: 2
7019807: RNCC: 5 | RNVC: 2

24 May 2012

4730-14-569-4471
Pipe Flange

145694471
02103787: RNCC: 3 | RNVC: 2

16 Sep 2011

4730-14-365-3034

4730-14-263-3247
Joint Tournant Dequ

142633247
GIU1240: RNCC: 3 | RNVC: 9

1 Jan 1970

4730-14-356-6574

4730-14-576-1867
Flange Tee

145761867
M2821352600100: RNCC: 3 | RNVC: 2

4 Jun 2013

4730-14-334-9540
Siege De Graisseur

143349540
415006: RNCC: 3 | RNVC: 2
415006: RNCC: 5 | RNVC: 2
415006: RNCC: 5 | RNVC: 9

2 Jun 1976

4730-14-285-3710
Union Double

142853710
401895: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-222-7333

4730-14-344-5201

4730-14-217-0093
Raccord Dequerre

142170093
9220526: RNCC: 3 | RNVC: 2
GIU1037: RNCC: 5 | RNVC: 9

1 Jan 1965