What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 86 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 86 of 185

4730-14-547-6370
Tube-Pipe Fitting Kit

145476370
KRCY-4: RNCC: 3 | RNVC: 2

20 Oct 2005

4730-14-486-2077
Tube To Boss Straight Adapter

144862077
64780-0: RNCC: 3 | RNVC: 2

5 Mar 1997

4730-14-325-9036
Pipe Flange

143259036
AS34TV102REP3: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-540-0495
Dispositif Recupera

145400495
MAT383-0012: RNCC: 3 | RNVC: 2

4 Mar 2004

4730-14-215-1527
Raccord Special Equ

142151527
FF50V: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-271-3382
Raccord

142713382
5380555: RNCC: 3 | RNVC: 2
5380555: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-576-3436
Hose Clamp

145763436
509604: RNCC: 3 | RNVC: 2

13 Jun 2013

4730-14-476-5377
Jeu Tape Pleine

144765377
BSNGCVF033A: RNCC: 3 | RNVC: 2

20 Jun 1995

4730-14-278-0950

4730-14-278-3130

4730-14-568-9662
Adapter Bushing

145689662
MS15: RNCC: 3 | RNVC: 2

25 Jul 2011

4730-14-565-4262
Exhaust-Intake Pneumatic Muffler

145654262
34600485: RNCC: 3 | RNVC: 2
A430409900051: RNCC: 5 | RNVC: 2

18 Aug 2010

4730-14-315-9623

4730-14-260-9314

4730-14-261-2330

4730-14-233-5208
Adaptateur Pour Bou

142335208
10032: RNCC: 3 | RNVC: 2
98144: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-248-9661

4730-14-550-4447
Tube To Boss Straight Adapter

145504447
RED22 18LVOMDCF: RNCC: 3 | RNVC: 2
5010631304: RNCC: 5 | RNVC: 2
RED2218LVOMDCF: RNCC: 5 | RNVC: 9

21 Jun 2006

4730-14-320-3031
Pipe Flange

143203031
0064771160: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-420-5037
Fluid Pressure Line Multiple Connector

144205037
13A8S: RNCC: 3 | RNVC: 2
813131628: RNCC: 5 | RNVC: 2
817Z33604: RNCC: 5 | RNVC: 2
0024288932: RNCC: 5 | RNVC: 2

10 Dec 1987

4730-14-372-2204
Tube Fitting Flared Sleeve

143722204
91271412: RNCC: 3 | RNVC: 2

1 Sep 1981

4730-14-382-8713
Tube To Boss Straight Adapter

143828713
PE60807H22: RNCC: 3 | RNVC: 2

17 Feb 1983

4730-14-427-4310
Tube Tee

144274310
352245: RNCC: 3 | RNVC: 2
AS10101000N59QO: RNCC: 5 | RNVC: 2

19 Oct 1988

4730-14-527-4039
Tube To Boss Straight Adapter

145274039
H77744: RNCC: 3 | RNVC: 2

24 Oct 2001

4730-14-279-1662
Fluid Pressure Line Multiple Connector

142791662
200138: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-418-1425
Quick-Disconnect Nipple

144181425
69392010: RNCC: 3 | RNVC: 2
69392110: RNCC: 5 | RNVC: 9
69402110: RNCC: 5 | RNVC: 9

6 Aug 1987

4730-14-298-3049
Fluid Pressure Line Multiple Connector

142983049
000548282P: RNCC: 3 | RNVC: 2
0UT1-119: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-514-6703
Reducing Tube Coupling Nut

145146703
10000D30525: RNCC: 3 | RNVC: 2

8 Jun 1999

4730-14-329-2722
Pipe Flange

143292722
R35625SMREP150: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-319-6605
Sediment Strainer Element

143196605
M23934SD: RNCC: 3 | RNVC: 9
23934: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-387-0517
Tube Tee

143870517
JBPLB6X1: RNCC: 3 | RNVC: 2
8202884: RNCC: 5 | RNVC: 9

24 Aug 1983

4730-14-300-6820
Tube To Boss Straight Adapter

143006820
R33337SM: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-562-1477
Fluid Passage Bolt

145621477
0043392: RNCC: 3 | RNVC: 2
43392: RNCC: 5 | RNVC: 2

1 Oct 2009

4730-14-368-0815
Crepine Equipee

143680815
N3051TP1BREP1ET2: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-425-0000
Tube To Boss Straight Adapter

144250000
0308740250: RNCC: 3 | RNVC: 2
0308740010: RNCC: 5 | RNVC: 2
89404394: RNCC: 5 | RNVC: 2
89414548: RNCC: 5 | RNVC: 2

16 Jun 1988

4730-14-514-4662
Tube Coupling

145144662
10498220: RNCC: 3 | RNVC: 2

26 May 1999

4730-14-486-4238
Filtre

144864238
051689: RNCC: 3 | RNVC: 2

19 Mar 1997

4730-14-287-9017

4730-14-233-9968
Bouchon Special

142339968
A59410: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-362-1005
Pipe Flange

143621005
GSM162-011F22REPG: RNCC: 3 | RNVC: 2

20 Feb 1980

4730-14-542-0543
Tube To Boss Straight Adapter

145420543
25212139-161: RNCC: 3 | RNVC: 2
502105007045A: RNCC: 3 | RNVC: 9
2521 2139-161: RNCC: 5 | RNVC: 2

2 Jul 2004

4730-14-319-2301
Reglable Raccord

143192301
420-66400L20X27: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-229-8326

4730-14-526-1197
Tube Union

145261197
20 242 230 1450: RNCC: 3 | RNVC: 2

4 Jul 2001

4730-14-502-5999
Valve

145025999
5010038819: RNCC: 3 | RNVC: 2

17 Dec 1997

4730-14-323-5702
Tube To Boss Straight Adapter

143235702
001462282P: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-382-8794
Tube To Boss Straight Adapter

143828794
PE40301K04: RNCC: 3 | RNVC: 2

2 Aug 2000

4730-14-493-2980
Tube To Boss Straight Adapter

144932980
5000515441: RNCC: 3 | RNVC: 2
F300 0T 012 1176: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-300-7475
Fluid Pressure Line Multiple Connector

143007475
411MA0295F5REPBRB200: RNCC: 3 | RNVC: 2
411MA295F5REPBRB200: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-322-9134

4730-14-362-7679

4730-14-280-8584

4730-14-270-0122
Tube-Hose Fitting Compression Sleeve

142700122
7062CE1F5B48Z10CNT18-10: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-536-2479
Tube To Boss Straight Adapter

145362479
RI3/8X1/4: RNCC: 3 | RNVC: 2
M710190085: RNCC: 5 | RNVC: 2

22 Jul 2003

4730-14-427-3368
Tube Tee

144273368
4730HDING355,6X8-139,7X4: RNCC: 2 | RNVC: 2

13 Oct 1988

4730-14-566-1947
Fluid Passage Bolt

145661947
NO PRIMARY REF 14-566-1947: RNCC: 3 | RNVC: 2
VCM 12/150: RNCC: 5 | RNVC: 9
FS0000166: RNCC: 6 | RNVC: 9

26 Oct 2010

4730-14-262-1553
Pipe Flange

142621553
7062DJ1F1M87-5XC18: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-459-9536
Tube To Boss Straight Adapter

144599536
Q1-52-25/26-34CYL-NU: RNCC: 3 | RNVC: 2

5 Jan 1993

4730-14-568-1088
Pipe Tee

145681088
ASNA3752-080806: RNCC: 1 | RNVC: 2
PE20103-080806: RNCC: 3 | RNVC: 2

9 May 2011

4730-14-271-0590
Raccord

142710590
F511BCL: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-491-2177
Fluid Passage Bolt

144912177
601941: RNCC: 3 | RNVC: 2
F300 0T 001 9250: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-210-7203
Quick Disconnect Coupling Half

142107203
IREXPX19: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-575-3548
Tube To Boss Straight Adapter

145753548
D100 015: RNCC: 3 | RNVC: 2

29 Mar 2013

4730-14-367-5306
Tube To Boss Straight Adapter

143675306
A013516 08 08: RNCC: 3 | RNVC: 2
9910150: RNCC: 3 | RNVC: 9
2816G21-8: RNCC: 5 | RNVC: 9

19 Jan 1981

4730-14-298-4683
Tube Fitting Brazing Ferrule

142984683
GSM163-011F7-1X: RNCC: 3 | RNVC: 2
GSM163-11-1X: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-268-8931
Tube To Boss Straight Adapter

142688931
631X4231: RNCC: 3 | RNVC: 2
U15-6T631X4231: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-334-2489
Tube Tee

143342489
GSM163-015F19: RNCC: 3 | RNVC: 2
GSM163-15F19: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-327-5521
Tube Union

143275521
1204-12-16X125: RNCC: 3 | RNVC: 2
0RSA12X16-125N: RNCC: 3 | RNVC: 2
5A12-16X125: RNCC: 3 | RNVC: 2
121093: RNCC: 5 | RNVC: 2
91758297: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-310-7588

4730-14-268-5160

4730-14-476-2184
Pipeline Flexible Spacer

144762184
DILATOFLEX-MD40DN500PN10: RNCC: 3 | RNVC: 2

31 May 1995

4730-14-500-2429
Lubrication Fitting Adapter

145002429
601133: RNCC: 3 | RNVC: 2
F300 0T 024 2452: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-553-6169
Tube Tee

145536169
930 135 030: RNCC: 3 | RNVC: 2
TA10L: RNCC: 3 | RNVC: 2

24 Apr 2007

4730-14-471-5730
Quick Disconnect Plug

144715730
120E41LTAJ: RNCC: 3 | RNVC: 2

1 Sep 1994

4730-14-340-9341

4730-14-249-4651
Ecrou-Raccord

142494651
A30420RR: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-568-6674
Tube Elbow

145686674
1500900002600: RNCC: 3 | RNVC: 2
COUDE00021: RNCC: 5 | RNVC: 2

27 Jun 2011

4730-14-269-1977

4730-14-551-0075
Pipe To Tube Straight Adapter

145510075
F47136: RNCC: 3 | RNVC: 2

18 Aug 2006

4730-14-395-0421
Fluid Passage Bolt

143950421
0000281090: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-540-1555
Pipe To Tube Straight Adapter

145401555
8816183131: RNCC: 3 | RNVC: 2

11 Mar 2004

4730-14-402-1901
Threaded Tube Fitting Plug

144021901
20PNMTXS: RNCC: 3 | RNVC: 2
PNTXS30: RNCC: 5 | RNVC: 2
PNTXS32: RNCC: 5 | RNVC: 2

26 Jun 1985

4730-14-515-3839
Tube To Boss Straight Adapter

145153839
6200048: RNCC: 3 | RNVC: 2

13 Jul 1999

4730-14-341-1279
Tube To Boss Straight Adapter

143411279
002497050P: RNCC: 3 | RNVC: 2

16 Mar 1977

4730-14-220-6364
Tube To Boss Straight Adapter

142206364
263425: RNCC: 3 | RNVC: 2
263425: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-238-6088

4730-14-393-8449
Flange To Hose Straight Adapter

143938449
8811891001: RNCC: 3 | RNVC: 2

23 Jun 1984

4730-14-220-6292
Fluid Passage Bolt

142206292
1B20: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-350-4123
Pipeline Flexible Spacer

143504123
214291: RNCC: 3 | RNVC: 2
MAF0001003383: RNCC: 6 | RNVC: 9

12 Jul 1978

4730-14-253-7864

4730-14-363-7819
Tube To Boss Straight Adapter

143637819
31350413: RNCC: 3 | RNVC: 2

6 Jul 1980

4730-14-496-5523
Union

144965523
518343: RNCC: 3 | RNVC: 2
F300 0T 021 6576: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-268-6412

4730-14-255-0350

4730-14-268-5115

4730-14-415-2426
Tube Tee

144152426
U1238F14DE33,7X2,3ETDE10,2X1,6: RNCC: 2 | RNVC: 2

21 Apr 1987

4730-14-560-0218
Quick Disconnect Coupling Half

145600218
GD 10526 14: RNCC: 3 | RNVC: 2

16 Mar 2009

4730-14-422-2527
Tube Union

144222527
8813949007: RNCC: 3 | RNVC: 2

24 Feb 1988

4730-14-393-1604

4730-14-303-9355

4730-14-474-1526
Tuyere

144741526
10000D30344: RNCC: 3 | RNVC: 2

31 Jan 1995

4730-14-356-6862

4730-14-269-4647

4730-14-041-9183
Detendeur-Compteur

140419183
ECEMAT7618: RNCC: 3 | RNVC: 2

1 Jun 1976

4730-14-305-0571

4730-14-381-0376

4730-14-450-2617
Flange To Tube Straight Adapter

144502617
PM1A241514002: RNCC: 3 | RNVC: 2
PM1A241514002: RNCC: 5 | RNVC: 2

25 Sep 1991

4730-14-218-3433

4730-14-293-7828

4730-14-260-9112
Pipe Flange

142609112
7062CA1F1-98AF42-2: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-433-3722
Hose To Gas Fitting Straight Adapter

144333722
DLT024612: RNCC: 3 | RNVC: 2
RAR1430: RNCC: 5 | RNVC: 2
DLT565179EREP8FOLIO2-1/3: RNCC: 5 | RNVC: 2

24 Jul 1989

4730-14-267-6341
Raccord Special

142676341
24019008800: RNCC: 3 | RNVC: 2
18JN188: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-506-4495
Tube Union

145064495
N1-1 1/2: RNCC: 3 | RNVC: 2
77091894: RNCC: 5 | RNVC: 2
91720317: RNCC: 5 | RNVC: 2

29 Apr 1998

4730-14-562-6070
Hose Coupling

145626070
3-23609A-48D: RNCC: 3 | RNVC: 2

6 Nov 2009

4730-14-369-9352
Tube-Hose Fitting Compression Sleeve

143699352
BI47: RNCC: 3 | RNVC: 9
7701001276: RNCC: 5 | RNVC: 2
7701001276: RNCC: 5 | RNVC: 9

18 May 1981

4730-14-563-5998
Tube Nipple

145635998
05C029: RNCC: 3 | RNVC: 2

24 Feb 2010

4730-14-316-8573
Tube Fitting Brazing Ferrule

143168573
RF2: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-494-3387
Tube To Boss Straight Adapter

144943387
5000296519: RNCC: 3 | RNVC: 2
F300 0T 017 0412: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-277-6190

4730-14-213-4229
Fluid Pressure Line Multiple Connector

142134229
56051Z: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-352-7755
Tube To Boss Straight Adapter

143527755
270104: RNCC: 3 | RNVC: 2
270104: RNCC: 5 | RNVC: 2

14 Nov 1978

4730-14-327-6184
Fluid Pressure Line Multiple Connector

143276184
0264401800: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-307-3984
Swivel Retaining Pipe Flange

143073984
DLT008519: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-538-9668
Return Tube Bend

145389668
NGM0053236506755: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-204-9277
Tube Fitting Brazing Ferrule

142049277
8082: RNCC: 3 | RNVC: 2

1 Jan 1963

4730-14-509-2582
Tube Coupling

145092582
0000311000: RNCC: 3 | RNVC: 2

21 Oct 1998

4730-14-451-5324
Tube Tee

144515324
996: RNCC: 3 | RNVC: 2
91301443: RNCC: 5 | RNVC: 2

21 Nov 1991

4730-14-398-6491
Pipe Coupling Leak Repair Clamp

143986491
1154: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-456-3455
Tube To Gas Fitting Straight Adapter

144563455
UMCK10X8.13S: RNCC: 3 | RNVC: 2

30 Jun 1992

4730-14-512-9252
Self-Sealing Coupling Assembly

145129252
72339: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-409-6896
Tube-Hose Fitting Compression Sleeve

144096896
741PN25: RNCC: 3 | RNVC: 9
74741PN25: RNCC: 5 | RNVC: 2
741 PN 25: RNCC: 5 | RNVC: 9
741PN25: RNCC: 5 | RNVC: 9

28 May 1986

4730-14-468-6350
Quick Disconnect Coupling Assembly

144686350
521 000: RNCC: 3 | RNVC: 2
1085231L00: RNCC: 5 | RNVC: 2

14 Mar 1994

4730-14-561-3956
Tube Coupling

145613956
SKA 28X3: RNCC: 3 | RNVC: 2
SKA 28X3: RNCC: 3 | RNVC: 2
FS0003160: RNCC: 6 | RNVC: 9

10 Jul 2009

4730-14-560-5346
Hose Coupling Assembly

145605346
3180014: RNCC: 3 | RNVC: 2

28 Apr 2009

4730-14-280-7303
Bride

142807303
206306: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-294-7292

4730-14-234-8746
Bouchon

142348746
201264: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-209-4003

4730-14-575-6174
Tube Coupling

145756174
ASNA3767E08: RNCC: 1 | RNVC: 2
PE29056D08: RNCC: 3 | RNVC: 2

18 Apr 2013

4730-14-262-9906
Patte Inferieure

142629906
DLT006439: RNCC: 3 | RNVC: 2
DLT006439: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-561-7437
Quick Disconnect Coupling Half

145617437
SSH6-63Y-BSPP: RNCC: 3 | RNVC: 2
SSH6-63Y-BSPP: RNCC: 3 | RNVC: 2
91794227: RNCC: 5 | RNVC: 2

1 Sep 2009

4730-14-560-1259
Pipe To Tube Straight Adapter

145601259
GE06SR1/2EDOMDCF: RNCC: 3 | RNVC: 2

26 Mar 2009

4730-14-495-8588
Tube To Boss Straight Adapter

144958588
NO PRIMARY REF14-495-8588: RNCC: 3 | RNVC: 2
66586: RNCC: 5 | RNVC: 9
F300 0T 020 2877: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-535-3636
Tube Tee

145353636
82422401: RNCC: 3 | RNVC: 2
5005130483: RNCC: 5 | RNVC: 2

22 May 2003

4730-14-506-3049
Tube Tee

145063049
130CU10: RNCC: 3 | RNVC: 2
77091077: RNCC: 5 | RNVC: 2
91348847: RNCC: 5 | RNVC: 2

22 Apr 1998

4730-14-558-0876
Tube To Boss Straight Adapter

145580876
E64900000024: RNCC: 3 | RNVC: 2

29 Aug 2008

4730-14-288-9030
Tube Tee

142889030
9104200066: RNCC: 3 | RNVC: 2
CA7-20: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-331-1612
Tube Coupling

143311612
0.311.25.08: RNCC: 3 | RNVC: 2
0-311-25-08: RNCC: 5 | RNVC: 2
0311-25-08: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-352-8277
Tube Tee

143528277
Q0-1R8X10X8: RNCC: 3 | RNVC: 2

14 Nov 1978

4730-14-308-4983
Tube To Boss Straight Adapter

143084983
4A8-12X100NU: RNCC: 3 | RNVC: 2
M8-12X1: RNCC: 3 | RNVC: 2
121011NU: RNCC: 3 | RNVC: 2
12 08 12 100 NU: RNCC: 3 | RNVC: 2
UMA8X12-100NNU: RNCC: 3 | RNVC: 2
12-8-12X100NU: RNCC: 5 | RNVC: 2
544764G0806: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-575-0484
Tube Coupling Body

145750484
ABS0395A4-32M: RNCC: 1 | RNVC: 2
ABS0395A4-32M: RNCC: 3 | RNVC: 2
ABS0395A4-32M: RNCC: 5 | RNVC: 2

11 Mar 2013

4730-14-303-1073
Pipe Flange

143031073
U1194-108: RNCC: 2 | RNVC: 2
4730BA-108: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-474-0098
Tube Union

144740098
FLEX1L139,7PN13EPDM/INOX: RNCC: 3 | RNVC: 2
STRAUB-FLEX1L139,7EPDM/INOX: RNCC: 5 | RNVC: 2
190 1391: RNCC: 5 | RNVC: 9

23 Jan 1995

4730-14-228-7989
Tube Tee

142287989
NO PRIMARY REF14-228-7989: RNCC: 3 | RNVC: 2
81384: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-401-8726
Lubricating Oil Cup

144018726
LUBS1-4016: RNCC: 3 | RNVC: 9

13 Jun 1985

4730-14-043-1865
Tube To Boss Straight Adapter

140431865
702A30-0967-20: RNCC: 3 | RNVC: 2

10 Apr 1984

4730-14-268-1187
Pipe Flange

142681187
6784-1DD50: RNCC: 2 | RNVC: 2
MEC11409: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-310-5874
Tube To Boss Straight Adapter

143105874
32-10-14X125RR: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-427-8466
Tube To Boss Straight Adapter

144278466
GE6PL1/4NPT: RNCC: 3 | RNVC: 2

17 Nov 1988

4730-14-440-8992
Tube Union

144408992
F9BPB6M12X1,5CO: RNCC: 3 | RNVC: 2
F9BPB6M12X150C0: RNCC: 5 | RNVC: 2
5005330079: RNCC: 5 | RNVC: 2
5005330202: RNCC: 5 | RNVC: 2
F9BPAB6M12X1,5PT: RNCC: 5 | RNVC: 2

7 Aug 1990

4730-14-485-5326
Tube To Boss Straight Adapter

144855326
15145574: RNCC: 3 | RNVC: 2

29 Jan 1997

4730-14-365-2028

4730-14-273-5264

4730-14-252-7469

4730-14-421-1919
Pipe To Hose Straight Adapter

144211919
01232534: RNCC: 3 | RNVC: 2
1232534: RNCC: 5 | RNVC: 2

6 Jan 1988

4730-14-313-4899

4730-14-543-8001
Tube To Boss Straight Adapter

145438001
9320747: RNCC: 3 | RNVC: 2

11 Dec 2004

4730-14-225-2834

4730-14-330-8832

4730-14-324-1291

4730-14-470-4281
Manchette Ventilati

144704281
BSNGCHF008F5D: RNCC: 3 | RNVC: 2

16 Jun 1994

4730-14-233-9454

4730-14-561-6067
Tube To Boss Straight Adapter

145616067
10F642EDMLS: RNCC: 3 | RNVC: 2
2501001800: RNCC: 5 | RNVC: 2
20 250 100 1800: RNCC: 5 | RNVC: 9

4 Aug 2009

4730-14-221-9635
Raccord Vabco

142219635
UMB10-3-8BSPUA10: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-456-2815
Quick Disconnect Coupling Half

144562815
SBA08-1103JV: RNCC: 3 | RNVC: 2
91726928: RNCC: 5 | RNVC: 2

25 Jun 1992

4730-14-448-8274
Swivel Flange To Hose Connector

144488274
81011-24: RNCC: 3 | RNVC: 2

17 Jul 1991

4730-14-403-7079
Sediment Strainer Element

144037079
250-50DIA13INOX: RNCC: 3 | RNVC: 2
250-50DIA13INOX: RNCC: 3 | RNVC: 2
250-50DIA13IN0X: RNCC: 5 | RNVC: 9

21 Aug 1985

4730-14-209-1270
Raccord Orientable

142091270
NO PRIMARY REF14-209-1270: RNCC: 3 | RNVC: 2
216171: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-494-8317
Lubrication Fitting

144948317
NO PRIMARY REF14-494-8317: RNCC: 3 | RNVC: 2
51-7853: RNCC: 5 | RNVC: 9
51-7853: RNCC: 5 | RNVC: 9
517853: RNCC: 5 | RNVC: 9
F300 0T 017 9592: RNCC: 6 | RNVC: 9
F300 0T 019 6222: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-436-1091
Lubricating Oil Cup

144361091
790-281: RNCC: 3 | RNVC: 2

5 Dec 1989

4730-14-228-6929
Tube Coupling

142286929
GSM1297FC1TABLEAU2D1-36: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-353-8222
Return Tube Bend

143538222
9090-0812-00: RNCC: 3 | RNVC: 2

16 Jan 1979

4730-14-535-8766
Self-Sealing Coupling Assembly

145358766
SCB04.7151/IC/JE: RNCC: 3 | RNVC: 2
91766903: RNCC: 5 | RNVC: 2

25 Jun 2003

4730-14-530-6347
Bride Raccordememen

145306347
MAT425-3006F17: RNCC: 3 | RNVC: 2

28 Jun 2002

4730-14-314-5627
Fluid Pressure Line Multiple Connector

143145627
121E52-217-00-0M1: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-443-6958
Fluid Flow Restrictor

144436958
B14DC1060-027: RNCC: 3 | RNVC: 2
B14DC1060-027: RNCC: 5 | RNVC: 2
B14DC1060-027: RNCC: 5 | RNVC: 9

5 Dec 1990

4730-14-516-8689
Tube To Boss Straight Adapter

145168689
3RA16-12: RNCC: 3 | RNVC: 2

20 Oct 1999

4730-14-273-5025
Tube To Boss Straight Adapter

142735025
7062BA1RCET1-20C337A: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-304-4885
Fluid Pressure Line Multiple Connector

143044885
F781-35: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-221-2748

4730-14-396-0611
Tube To Boss Straight Adapter

143960611
CM13979210: RNCC: 3 | RNVC: 9

27 Nov 1984

4730-14-422-7283
Tube To Boss Straight Adapter

144227283
0298561620: RNCC: 3 | RNVC: 2

17 Mar 1988

4730-14-348-4738
Fluid Pressure Line Multiple Connector

143484738
91181417: RNCC: 3 | RNVC: 2

29 Mar 1978

4730-14-543-1530
Flange To Hose Elbow

145431530
922214: RNCC: 3 | RNVC: 9

26 Aug 2004

4730-14-421-0277
Sediment Strainer Body

144210277
711933: RNCC: 3 | RNVC: 2

6 Jan 1988

4730-14-428-5858
Raccord Buse

144285858
SBE1046: RNCC: 3 | RNVC: 2

8 Dec 1988

4730-14-362-1793
Tube Coupling Nut Assembly

143621793
IE-JET12V: RNCC: 3 | RNVC: 2
IEJET12V: RNCC: 5 | RNVC: 2
KE-JETI12V: RNCC: 5 | RNVC: 2
RU47064: RNCC: 5 | RNVC: 2
RU47064: RNCC: 5 | RNVC: 2
EJETI12V: RNCC: 5 | RNVC: 2
85-800-7432: RNCC: 6 | RNVC: 9

20 Feb 1980

4730-14-575-9939
Pipe To Tube Straight Adapter

145759939
BESS DKO 20 SR 3/4 ED ZN FER NO-: RNCC: 3 | RNVC: 1
Y00014171: RNCC: 5 | RNVC: 2
109820A: RNCC: 5 | RNVC: 2
4838.700: RNCC: 5 | RNVC: 2

22 May 2013

4730-14-296-1927
Obturateur Tube Nu

142961927
121E77-216-01-0: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-333-5274

4730-14-032-0871
Support De Raccord

140320871
A11A231474590A1: RNCC: 3 | RNVC: 2

5 Jul 1980

4730-14-430-4255
Capsule Obturation

144304255
61744M3REP28: RNCC: 3 | RNVC: 2

21 Mar 1989

4730-14-568-9599
Tube Elbow

145689599
CLS4518: RNCC: 3 | RNVC: 2

22 Jul 2011

4730-14-250-1440
Tube Tee

142501440
EN10242-B1-3/8-ZN-A: RNCC: 2 | RNVC: 2
770130203: RNCC: 3 | RNVC: 2
770 130 203: RNCC: 5 | RNVC: 2
130 3-8Z: RNCC: 5 | RNVC: 2
E29801B1CZ: RNCC: 5 | RNVC: 9
50 3-8Z: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-343-5660
Tube Tee

143435660
GSM523-026F5: RNCC: 3 | RNVC: 2
GSM523-26F5: RNCC: 5 | RNVC: 2

16 Jun 1977

4730-14-257-0968
Embout Reducteur

142570968
330A31-1189-20: RNCC: 3 | RNVC: 2
330A31-1189-2000: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-389-5834
Tube To Boss Straight Adapter

143895834
ST159-2M886P18: RNCC: 3 | RNVC: 2

20 Dec 1983

4730-14-244-0285
Tube Tee

142440285
NG40901-4APL23N0M1: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-512-6378
Pipe Flange

145126378
NO PRIMARY REF14-512-6378: RNCC: 3 | RNVC: 2
NNP 4730864527651: RNCC: 5 | RNVC: 9

17 Feb 1999

4730-14-222-7289
Tube Tee

142227289
GSM1297FE3-15TABLEAU2: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-378-8887
Pipe Flange

143788887
PAA50-05-002: RNCC: 3 | RNVC: 2

6 Sep 1982

4730-14-502-7668
Raccord

145027668
6I1052: RNCC: 3 | RNVC: 2

17 Dec 1997

4730-14-561-6702
Fluid Pressure Line Multiple Connector

145616702
7508786F01: RNCC: 3 | RNVC: 2

19 Aug 2009

4730-14-329-0929
Tube Tee

143290929
411316: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-349-3248
Quick Disconnect Coupling Half

143493248
72275996: RNCC: 3 | RNVC: 2
3085400W: RNCC: 5 | RNVC: 2

22 May 1978

4730-14-352-5833
Fluid Pressure Line Multiple Connector

143525833
A11B221278010A1: RNCC: 3 | RNVC: 2

16 Oct 1978

4730-14-334-0340

4730-14-551-7759
Bulkhead Hose Connector

145517759
S304A2017217: RNCC: 3 | RNVC: 2

23 Oct 2006

4730-14-423-4314
Pipe Flange

144234314
UA50088006PN150-11D1DN25: RNCC: 2 | RNVC: 2
4730HCPN150DN02511D1: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-475-4591
Tube Union

144754591
LN329-017REP94: RNCC: 3 | RNVC: 2
925470: RNCC: 5 | RNVC: 2

7 Apr 1995

4730-14-453-2827
Quick Disconnect Coupling Assembly

144532827
RBE11-1103-ODIAHPFB: RNCC: 3 | RNVC: 2
91727180: RNCC: 5 | RNVC: 2

12 Feb 1992

4730-14-418-6532
Pipe Flange

144186532
E29203-01B-PN16DN125BF42N: RNCC: 2 | RNVC: 2
MEC10337: RNCC: 3 | RNVC: 2
4730CJ-DN125: RNCC: 5 | RNVC: 2

9 Sep 1987

4730-14-501-2163
Tube To Boss Straight Adapter

145012163
420-008: RNCC: 3 | RNVC: 2
420.008: RNCC: 3 | RNVC: 2
F300 0T 025 2568: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-501-2441
Tube To Boss Straight Adapter

145012441
490-118: RNCC: 3 | RNVC: 2
490.118: RNCC: 3 | RNVC: 2
F300 0T 025 2846: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-293-1398

4730-14-213-4225

4730-14-335-9908
Equip Bloc Distribu

143359908
17-7-70216: RNCC: 3 | RNVC: 2
17-7-70216: RNCC: 5 | RNVC: 2

24 Jul 1976

4730-14-278-8197

4730-14-325-1169

4730-14-433-5997
Tube To Boss Straight Adapter

144335997
LV117-CS1206L: RNCC: 3 | RNVC: 2
91617218: RNCC: 5 | RNVC: 2
UMCA12X12-17L: RNCC: 5 | RNVC: 2

2 Aug 1989

4730-14-552-6709
Quick Disconnect Coupling Half

145526709
RBE 06.6101/IC/HPI: RNCC: 3 | RNVC: 2

23 Jan 2007

4730-14-041-5082
Diaphragme

140415082
6784-1CI20-625: RNCC: 2 | RNVC: 2

1 Jan 1974

4730-14-405-0698
Tube Coupling

144050698
FILETAGE1 1/4MALE: RNCC: 3 | RNVC: 9

20 Nov 1985

4730-14-427-6297
Rouleau Nylon Dia70

144276297
PN298-05-8: RNCC: 3 | RNVC: 2

27 Oct 1988

4730-14-292-5092
Fluid Pressure Line Multiple Connector

142925092
F794-30: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-501-2366
Tube To Boss Straight Adapter

145012366
471-148: RNCC: 3 | RNVC: 2
471.148: RNCC: 3 | RNVC: 2
F300 0T 025 2771: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-333-6191
Quick Disconnect Coupling Half

143336191
9949511: RNCC: 3 | RNVC: 2
9949511: RNCC: 5 | RNVC: 9
TAHM155S4-722-10D: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-334-2501
Tube Tee

143342501
GSM163-015F35: RNCC: 3 | RNVC: 2
GSM163-15F35: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-277-6559

4730-14-428-5861
Corps Obturateur

144285861
SBE1116: RNCC: 3 | RNVC: 2

8 Dec 1988

4730-14-291-0034
Couvercle Prepare

142910034
27657220W: RNCC: 3 | RNVC: 2
65722: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-564-3692
Tube To Boss Straight Adapter

145643692
MDS81X132: RNCC: 3 | RNVC: 2

26 Apr 2010

4730-14-572-8666
Boss Outlet

145728666
0298721080: RNCC: 3 | RNVC: 2

20 Aug 2012

4730-14-374-4459
Bride Speciale

143744459
MX69REP2: RNCC: 3 | RNVC: 2

8 Dec 1981

4730-14-568-9697
Adapter Bushing

145689697
MLS22: RNCC: 3 | RNVC: 2

25 Jul 2011

4730-14-367-5011
Fluid Pressure Line Multiple Connector

143675011
EDE53260-01-01: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-385-8109
Quick Disconnect Coupling Half

143858109
RBE03-2904-ODIC3W: RNCC: 3 | RNVC: 2
RBE3-2904-OD3ICW: RNCC: 5 | RNVC: 2

26 Jul 1983

4730-14-271-6766
Raccord Degazage

142716766
29-1-057673-0: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-299-8489
Tube To Boss Straight Adapter

142998489
4730AJUNI0NMALERBSM18X150CA14: RNCC: 2 | RNVC: 2
GSM164-014F13: RNCC: 3 | RNVC: 2
Q1-52-14-18X150NU: RNCC: 3 | RNVC: 2
UMK14X18-150NNU: RNCC: 3 | RNVC: 2
4CA14-18X150NU: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-314-1327

4730-14-331-0997
Tube Coupling Inverted Nut

143310997
3201724: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-524-0807
Fluid Flow Restrictor

145240807
20714465: RNCC: 3 | RNVC: 2

22 Feb 2001

4730-14-543-8749
Tube To Boss Straight Adapter

145438749
560503384: RNCC: 3 | RNVC: 2

14 Dec 2004

4730-14-418-4464
Pipe Flange

144184464
3550022: RNCC: 3 | RNVC: 2

26 Aug 1987

4730-14-465-5212
Fluid Flow Restrictor

144655212
A61816: RNCC: 3 | RNVC: 2

30 Sep 1993

4730-14-393-5886
Tube To Boss Straight Adapter

143935886
890028C655AC: RNCC: 3 | RNVC: 2

7 Jun 1984

4730-14-394-1685
Pipe Coupling Leak Repair Clamp

143941685
1156: RNCC: 3 | RNVC: 2

23 Jun 1984

4730-14-250-0766
Fluid Passage Bolt

142500766
B018X150: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-225-0618
Repartiteur Deux Vo

142250618
4790P48A: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-505-3405
Quick Disconnect Coupling Half

145053405
RBE06.2906: RNCC: 3 | RNVC: 2

18 Mar 1998

4730-14-556-8675
Pipe True Wye

145568675
RA1A225150161A1: RNCC: 3 | RNVC: 2

16 Apr 2008

4730-14-390-2750
Quick Disconnect Coupling Half

143902750
QSM8: RNCC: 3 | RNVC: 2

26 Jan 1984

4730-14-300-1564

4730-14-346-4561
Bouchon Blocage Man

143464561
C193SANSP0USS0IR: RNCC: 3 | RNVC: 2

12 Dec 1977

4730-14-217-3594
Raccord Coude Speci

142173594
205036: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-319-6543
Fluid Pressure Line Multiple Connector

143196543
C52134105REP2: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-336-2975

4730-14-499-2640
Tube To Boss Straight Adapter

144992640
5R6/16X150OR: RNCC: 3 | RNVC: 2
5005430092: RNCC: 5 | RNVC: 2
1004484104: RNCC: 5 | RNVC: 2
91100601: RNCC: 5 | RNVC: 2
F300 0T 020 5446: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-568-9011
Hose Clamp

145689011
16700006: RNCC: 3 | RNVC: 2
010,5-505R: RNCC: 5 | RNVC: 2
OSE 10,5/5W4: RNCC: 5 | RNVC: 9

20 Jul 2011

4730-14-405-3872
Pipe Elbow Assembly

144053872
NO PRIMARY REF14-405-3872: RNCC: 3 | RNVC: 2
28525-1: RNCC: 5 | RNVC: 9
2852510000: RNCC: 5 | RNVC: 9

27 Nov 1985

4730-14-498-6633
Tube To Boss Straight Adapter

144986633
81119201: RNCC: 3 | RNVC: 2
5000118492: RNCC: 3 | RNVC: 2
122121183: RNCC: 3 | RNVC: 9
22A12L-8-13F: RNCC: 5 | RNVC: 2
F300 0T 007 4456: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-263-6381
Tube Coupling

142636381
7062BC1RPET2-14CA52-3: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-373-4270
Tube To Boss Straight Adapter

143734270
8000-9-212: RNCC: 3 | RNVC: 2

21 Oct 1981

4730-14-224-3897
Tube Fitting Brazing Ferrule

142243897
GSM163-002DETNF: RNCC: 3 | RNVC: 2
GSM163-02DETNF: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-500-6318
Tube To Boss Straight Adapter

145006318
XGE25-S-R3-4A3C: RNCC: 3 | RNVC: 2
XGE25SR3-4A3C: RNCC: 3 | RNVC: 2
F300 0T 024 6504: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-576-1276
Non-Metallic Connecting Sleeve

145761276
ABS1150B16-001: RNCC: 1 | RNVC: 2
ABS1150B16-001: RNCC: 3 | RNVC: 2
ABS1150B16-001: RNCC: 5 | RNVC: 2

30 May 2013

4730-14-547-6005
Tube To Hose Straight Adapter

145476005
RS-281-7866: RNCC: 3 | RNVC: 2
RS2817866: RNCC: 5 | RNVC: 2

18 Oct 2005

4730-14-393-4008
Quick Disconnect Coupling Half

143934008
0799-1085: RNCC: 3 | RNVC: 2
0799-0085: RNCC: 5 | RNVC: 2
SAF0799-1085: RNCC: 5 | RNVC: 9

7 Apr 1984

4730-14-370-3856
Tube Fitting Brazing Ferrule

143703856
BN320-513CREP5: RNCC: 3 | RNVC: 2

18 May 1981

4730-14-462-8465
Flange To Hose Straight Adapter

144628465
306229-01-02: RNCC: 3 | RNVC: 2

5 May 1993

4730-14-423-4629
Pipe Flange

144234629
UA50088006PN420-11B2SDN80: RNCC: 2 | RNVC: 2
4730HCPN420DN08011B2S: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-410-7520
Pipeline Flexible Spacer

144107520
A02358-03-1000P017: RNCC: 3 | RNVC: 2

9 Jul 1986

4730-14-324-8791
Threaded Tube Fitting Plug

143248791
330A87-9826-21: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-465-5342
Fluid Flow Restrictor

144655342
A82045-70: RNCC: 3 | RNVC: 2

30 Sep 1993

4730-14-508-8173
Tube To Boss Straight Adapter

145088173
00129725: RNCC: 3 | RNVC: 2
136260-00-26: RNCC: 5 | RNVC: 9
136260.00.26: RNCC: 5 | RNVC: 9

30 Sep 1998

4730-14-443-7526
Hose To Boss Straight Adapter

144437526
AF151-13: RNCC: 3 | RNVC: 2
91536059: RNCC: 5 | RNVC: 2

5 Dec 1990

4730-14-443-2841
Tube Tee

144432841
IB-005TL/DIV50: RNCC: 3 | RNVC: 2
IB-005TL: RNCC: 5 | RNVC: 2

14 Nov 1990

4730-14-346-9434
Fluid Pressure Line Multiple Connector

143469434
341A75-2015-00: RNCC: 3 | RNVC: 2

19 Jan 1978

4730-14-311-3648

4730-14-284-4059

4730-14-375-7115
Tube To Boss Straight Adapter

143757115
4730AJ4.3DN25EQUIPE: RNCC: 2 | RNVC: 2
8401252766: RNCC: 3 | RNVC: 2

26 Feb 1982

4730-14-388-1760
Quick Disconnect Coupling Half

143881760
SH4-63: RNCC: 3 | RNVC: 2
SH4-63: RNCC: 3 | RNVC: 2

12 Oct 1983

4730-14-311-7799
Tube To Boss Straight Adapter

143117799
3097-09-03-002: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-380-9172
Quick Disconnect Coupling Half

143809172
NO PRIMARY REF14-380-9172: RNCC: 3 | RNVC: 2
752142: RNCC: 5 | RNVC: 9
VG2-15-2F: RNCC: 5 | RNVC: 9

14 Dec 1982

4730-14-313-6394
Bulkhead Hose Connector

143136394
121A21-260-09-0M1: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-281-6594
Tube Tee

142816594
511-410-129R1: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-452-0202
Rapid Action Coupled Pipe Cap

144520202
MRA04-8550: RNCC: 3 | RNVC: 2
MRA04.8550: RNCC: 5 | RNVC: 2

18 Dec 1991

4730-14-348-2034
Fluid Pressure Line Multiple Connector

143482034
608-12-90ARSKS: RNCC: 3 | RNVC: 2

29 Mar 1978

4730-14-250-1050
Fluid Pressure Line Multiple Connector

142501050
50218-12-14: RNCC: 3 | RNVC: 2
50218-12-14: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-529-8374
Tube Tee

145298374
EVL8-PL: RNCC: 3 | RNVC: 2
EVL8-PL: RNCC: 3 | RNVC: 9
EVL8PL: RNCC: 5 | RNVC: 2

17 Apr 2002

4730-14-559-8784
Tube To Boss Straight Adapter

145598784
GE16SRA3CX: RNCC: 3 | RNVC: 2

27 Feb 2009

4730-14-545-2125
Flange To Hose Straight Adapter

145452125
PW3231: RNCC: 3 | RNVC: 2
6KK114: RNCC: 5 | RNVC: 2

24 Mar 2005

4730-14-392-0269
Tube To Boss Straight Adapter

143920269
30-88846: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-394-9885
Bulkhead Hose Connector

143949885
39086006: RNCC: 3 | RNVC: 2
39086006: RNCC: 5 | RNVC: 9

2 Oct 1984

4730-14-211-1970
Embout Intermediair

142111970
34282: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-440-0719
Ens Adaptateur Dn25

144400719
A4H41770: RNCC: 3 | RNVC: 2

10 Jul 1990

4730-14-344-1011
Coude Plastique

143441011
CH8: RNCC: 3 | RNVC: 2

13 Jul 1977

4730-14-221-2184

4730-14-448-6296
Suction Pump Connector

144486296
RAC 110: RNCC: 3 | RNVC: 2

4 Jul 1991

4730-14-245-9464

4730-14-306-9312

4730-14-327-5108

4730-14-302-9870
Sediment Strainer Element

143029870
4860-01-40-3: RNCC: 3 | RNVC: 2
4860-01-40-3: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-246-6449
Lubrication Fitting

142466449
9212031: RNCC: 3 | RNVC: 2
55713-11: RNCC: 3 | RNVC: 2
0735-006-50: RNCC: 5 | RNVC: 2
G55BIS10-100: RNCC: 5 | RNVC: 2
5002112: RNCC: 5 | RNVC: 2
1 507 697 E 00: RNCC: 5 | RNVC: 2
9-21-20-31: RNCC: 5 | RNVC: 9
ALG5004.112: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-560-5181
Tube Coupling

145605181
G 185296-10E: RNCC: 3 | RNVC: 2

28 Apr 2009

4730-14-347-5655
Fluid Pressure Line Multiple Connector

143475655
329534: RNCC: 3 | RNVC: 2
MA31-12: RNCC: 5 | RNVC: 2

1 Mar 1978

4730-14-449-9565
Quick Disconnect Coupling Half

144499565
PS006-1116LNSVI: RNCC: 3 | RNVC: 2
PSO06-1116/LD/VI: RNCC: 3 | RNVC: 2
PSO06-1116NSVI: RNCC: 3 | RNVC: 2

18 Sep 1991

4730-14-334-2449
Tube Tee

143342449
GSM163-004BF13: RNCC: 3 | RNVC: 2
GSM163-04BF13: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-438-7415
Pipe Joint Welding Ring

144387415
LN324-079REP13: RNCC: 3 | RNVC: 2
LN324-079F7REP13: RNCC: 5 | RNVC: 2

3 Apr 1990

4730-14-501-4674
Tube Tee

145014674
NO PRIMARY REF14-501-4674: RNCC: 3 | RNVC: 2
NNP4730844556371: RNCC: 5 | RNVC: 9

29 Oct 1997

4730-14-332-5762
Tube Tee

143325762
319A73-37-090-04: RNCC: 3 | RNVC: 2
85-800-5485: RNCC: 6 | RNVC: 9

2 Jul 1975

4730-14-218-3432
Special Raccord

142183432
3919292: RNCC: 3 | RNVC: 2
3919-292: RNCC: 5 | RNVC: 2

1 Jan 1965

4730-14-493-0000
Graisseur

144930000
4046 822 253 642: RNCC: 3 | RNVC: 2
F300 0T 009 4311: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-376-3538
Pipe Flange

143763538
1818: RNCC: 3 | RNVC: 9

30 Mar 1982

4730-14-565-7350
Hose Coupling

145657350
0024558064: RNCC: 3 | RNVC: 2
25291137: RNCC: 5 | RNVC: 2

20 Sep 2010

4730-14-368-9141
Butee Autoreglable

143689141
N0224F5A: RNCC: 3 | RNVC: 2

10 Mar 1981

4730-14-458-8491
Hose To Boss Straight Adapter

144588491
854-640-040-0: RNCC: 3 | RNVC: 2

5 Nov 1992

4730-14-300-6581
Tube To Boss Straight Adapter

143006581
773-418-059FF8DET12: RNCC: 3 | RNVC: 2
773-418-059FF8DET12: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-041-1887
Tube Coupling

140411887
N410-83: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-428-9463
Pipe Flange

144289463
4730JAPN150DN80-11D1S-11: RNCC: 2 | RNVC: 2

28 Dec 1988

4730-14-544-5252
Tube To Gas Fitting Straight Adapter

145445252
HLA-1630: RNCC: 3 | RNVC: 2
HLA-1630: RNCC: 3 | RNVC: 9

8 Feb 2005

4730-14-222-6535
Tube Fitting Brazing Ferrule

142226535
GSM1297F1AF1BTABLEAU1D1-36I31: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-365-5086

4730-14-435-6992
Hose To Boss Straight Adapter

144356992
211200015: RNCC: 3 | RNVC: 9

20 Nov 1989

4730-14-211-4324
Fluid Pressure Line Multiple Connector

142114324
43265: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-376-3537
Pipe Flange

143763537
1815: RNCC: 3 | RNVC: 2

1 Sep 1999

4730-14-476-7039
Fluid Pressure Line Multiple Connector

144767039
101160601790: RNCC: 3 | RNVC: 2

28 Jun 1995

4730-14-540-8026
Tube To Boss Straight Adapter

145408026
0101 10 17: RNCC: 3 | RNVC: 2
01011017: RNCC: 5 | RNVC: 2

23 Apr 2004

4730-14-524-3395
Self-Sealing Coupling Assembly

145243395
TB4012371: RNCC: 3 | RNVC: 2

14 Mar 2001

4730-14-553-3936
Flange To Tube Elbow

145533936
M4721303600000: RNCC: 3 | RNVC: 2
M4721303600000: RNCC: 5 | RNVC: 2

29 Mar 2007

4730-14-416-3271
Tube To Boss Straight Adapter

144163271
LW118-NS2512S: RNCC: 3 | RNVC: 2
84052528NU: RNCC: 5 | RNVC: 2

3 Jun 1987

4730-14-424-9706
Tube Coupling

144249706
SKA16: RNCC: 3 | RNVC: 2
SKA16: RNCC: 3 | RNVC: 9

16 Jun 1988

4730-14-436-7061
Bulkhead Hose Connector

144367061
DA2C203520610A1: RNCC: 3 | RNVC: 2

3 Jan 1990

4730-14-374-1140
Tube Tee

143741140
8JMTXS: RNCC: 3 | RNVC: 2
8JMTXS: RNCC: 3 | RNVC: 2
JTXS12: RNCC: 5 | RNVC: 2

8 Dec 1981

4730-14-400-1793
Self-Sealing Coupling Half

144001793
CPH8E49001: RNCC: 3 | RNVC: 2

24 Apr 1985

4730-14-575-4151
Tube Cap

145754151
80304: RNCC: 3 | RNVC: 2

4 Apr 2013

4730-14-509-1519
Fluid Passage Bolt

145091519
ER3193: RNCC: 3 | RNVC: 2

21 Oct 1998

4730-14-394-6270

4730-14-367-7936

4730-14-564-7773
Hydraulic Manifold Assembly

145647773
E14985: RNCC: 3 | RNVC: 2

4 Jun 2010

4730-14-335-6146
Tube To Boss Straight Adapter

143356146
12-10-12-17CYL: RNCC: 3 | RNVC: 2
UMA10X12-17N: RNCC: 3 | RNVC: 2
12-10-17CYL: RNCC: 3 | RNVC: 2

30 Jun 1976

4730-14-031-0816
Hose Coupling Assembly

140310816
9957161: RNCC: 3 | RNVC: 2
9957161: RNCC: 5 | RNVC: 9
9-95-71-61: RNCC: 5 | RNVC: 9

14 Jun 1980

4730-14-415-1232
Tube Tee

144151232
4730-51INGDN25/10: RNCC: 2 | RNVC: 2
ST2069TEDN25-10I47X25N: RNCC: 5 | RNVC: 2

1 Apr 1987

4730-14-242-1955
Fluid Passage Bolt

142421955
145-08T02-02: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-375-6773
Tube To Boss Straight Adapter

143756773
GSM164-064F11: RNCC: 3 | RNVC: 2

26 Feb 1982

4730-14-388-2603
Pipe Expansion Joint

143882603
NO PRIMARY REF 14-388-2603: RNCC: 3 | RNVC: 2
M16412: RNCC: 5 | RNVC: 9

12 Oct 1983

4730-14-345-0152
Pipe Flange

143450152
54000-04: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-277-6553
Pipe Flange

142776553
6784-1CD20-10: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-555-8776
Tube Elbow

145558776
0301042070: RNCC: 3 | RNVC: 2

20 Dec 2007

4730-14-274-6989

4730-14-353-1366

4730-14-568-9026
Tube To Hose Straight Adapter

145689026
7420809233: RNCC: 3 | RNVC: 2
20809233: RNCC: 5 | RNVC: 2

20 Jul 2011

4730-14-262-1799

4730-14-238-5578

4730-14-371-5205
Tube To Boss Straight Adapter

143715205
17552761: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-413-2358
Aiguillage

144132358
8001259: RNCC: 3 | RNVC: 2
8001259: RNCC: 5 | RNVC: 9

26 Nov 1986

4730-14-223-8498
Barillet Air Compri

142238498
7693-8212: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-240-9034

4730-14-209-4896
Raccord Equipe

142094896
F522DN12: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-230-5978
Bulkhead Hose Connector

142305978
3761S32A: RNCC: 3 | RNVC: 2
3761S32A: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-551-1252
Hydraulic Swivel Joint

145511252
47175367: RNCC: 3 | RNVC: 2

28 Aug 2006

4730-14-528-5595
Tube To Boss Straight Adapter

145285595
375669: RNCC: 3 | RNVC: 2

30 Jan 2002

4730-14-362-4489
Pipe Flange

143624489
32064: RNCC: 3 | RNVC: 2
365113120: RNCC: 5 | RNVC: 9
4104572: RNCC: 5 | RNVC: 9

19 Mar 1980

4730-14-342-3466

4730-14-500-9371
Tube Coupling

145009371
E68509999002: RNCC: 3 | RNVC: 2
F300 0T 024 9583: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-305-3488
Pipe Flange

143053488
557788: RNCC: 3 | RNVC: 2
5155778800: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-514-3818
Fluid Pressure Line Multiple Connector

145143818
WH8PLMKDSA3C: RNCC: 3 | RNVC: 2

19 May 1999

4730-14-451-7545
Sediment Strainer Element

144517545
250-50DIA8-5CQ: RNCC: 3 | RNVC: 2

4 Dec 1991

4730-14-333-5336
Bloc Mobile Tiroir

143335336
A0294-008F8: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-478-3861
Pipe Flange

144783861
DEV010890/004: RNCC: 3 | RNVC: 2

26 Oct 1995

4730-14-400-4486
Tube To Boss Straight Adapter

144004486
GSM524-014F4B: RNCC: 3 | RNVC: 2

24 Apr 1985

4730-14-323-9034
Tube To Boss Straight Adapter

143239034
UFB14-1-2BSP: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-377-5244
Quick Disconnect Coupling Assembly

143775244
3001CTS500-121: RNCC: 3 | RNVC: 2
3001CTS500121: RNCC: 3 | RNVC: 2
3001CTS500121: RNCC: 5 | RNVC: 2

17 May 1982

4730-14-329-5389
Lubrication Fitting

143295389
7014010: RNCC: 3 | RNVC: 2
61930001: RNCC: 3 | RNVC: 2
68789: RNCC: 3 | RNVC: 2
68789: RNCC: 3 | RNVC: 9
203024X02011A: RNCC: 3 | RNVC: 9
109071X02010A: RNCC: 5 | RNVC: 9
ALG7014010: RNCC: 5 | RNVC: 9
F300 0T 019 7001: RNCC: 6 | RNVC: 9
F300 0T 019 7290: RNCC: 6 | RNVC: 9

2 Jul 1975

4730-14-367-7173

4730-14-487-5141
Bulkhead Hose Connector

144875141
RA1M525203190: RNCC: 3 | RNVC: 2

10 Apr 1997

4730-14-528-4154
Quick Disconnect Coupling Half

145284154
RBE03.7804-1A-W: RNCC: 3 | RNVC: 2
RBE0378041A-W: RNCC: 5 | RNVC: 2

28 Jan 2002

4730-14-309-1268

4730-14-561-6617
Flexible Tube Coupling Assembly

145616617
6G6FBSPORX90: RNCC: 3 | RNVC: 2
GAH6G6FBSPORX90: RNCC: 5 | RNVC: 2

18 Aug 2009

4730-14-522-8567
Fluid Flow Restrictor

145228567
234489: RNCC: 3 | RNVC: 2

1 Dec 2000

4730-14-338-0861

4730-14-301-7987
Tube To Boss Straight Adapter

143017987
NO PRIMARY REF14-301-7987: RNCC: 3 | RNVC: 2
B4C361466REP5: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-423-4444
Pipe Flange

144234444
UA50088006PN420-11D1DN32: RNCC: 2 | RNVC: 2
4730HCPN420DN03211D1: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-397-0252
Tube Coupling

143970252
NO PRIMARY REF14-397-0252: RNCC: 3 | RNVC: 2
9104100047: RNCC: 5 | RNVC: 9

1 Dec 1984

4730-14-395-3172
Pipe Flange

143953172
CAA007-76,1MALE: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-324-1321
Tube To Boss Straight Adapter

143241321
9107-00-02A: RNCC: 3 | RNVC: 2
9107-00-02A: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-398-5847
Tube Tee

143985847
GSM164-052F2: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-353-4196
Fluid Passage Bolt

143534196
99641124001: RNCC: 3 | RNVC: 2
99-641-124-001: RNCC: 5 | RNVC: 2

8 Dec 1978

4730-14-530-1942
Swivel Flange To Hose Connector

145301942
7-1000-001: RNCC: 3 | RNVC: 2
8039182W00: RNCC: 5 | RNVC: 2

22 May 2002

4730-14-330-2331
Ecrou Presse-Etoupe

143302331
401080: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-335-7130

4730-14-375-4030
Ele Bouchon Femelle

143754030
A46316: RNCC: 3 | RNVC: 2

26 Feb 1982

4730-14-217-5380

4730-14-367-7894

4730-14-367-7242

4730-14-262-6238
Levier Dinverseur

142626238
GIU1137: RNCC: 3 | RNVC: 9

1 Jan 1970

4730-14-040-5258
Raccord Trois Voies

140405258
M5BA521-71-04: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-264-4929

4730-14-564-3957
Adapter Bushing

145643957
A430400100059: RNCC: 3 | RNVC: 2
222EB203: RNCC: 5 | RNVC: 2

27 Apr 2010

4730-14-564-1149
Hose Connector Sleeve

145641149
A430400100036: RNCC: 3 | RNVC: 2
609GB028: RNCC: 5 | RNVC: 2

8 Apr 2010

4730-14-371-2727
Tube Tee

143712727
49-12-12-17C0NU: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-297-4265
Tube Coupling

142974265
NO PRIMARY REF14-297-4265: RNCC: 3 | RNVC: 2
511-15X21: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-423-3940
Pipe Flange

144233940
UA50088006PN20-12C2DN200: RNCC: 2 | RNVC: 2
4730HBPN20DN20012C2: RNCC: 5 | RNVC: 2

16 Apr 1988

4730-14-392-5441
Raccord Corps

143925441
700201-15: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-571-3637
Tube Elbow

145713637
7421564291: RNCC: 1 | RNVC: 2
3199 06 67: RNCC: 3 | RNVC: 2
21564291: RNCC: 5 | RNVC: 2
5000987013: RNCC: 5 | RNVC: 9
5005330089: RNCC: 5 | RNVC: 9
5005330190: RNCC: 5 | RNVC: 9

16 Mar 2012

4730-14-571-0993
Flange To Tube Straight Adapter

145710993
M2821352520000: RNCC: 3 | RNVC: 2

20 Feb 2012

4730-14-561-4145
Tube Nipple

145614145
15011: RNCC: 3 | RNVC: 2

15 Jul 2009

4730-14-517-5376
Tube Union

145175376
366A52-1084-20: RNCC: 3 | RNVC: 2

5 Jan 2000

4730-14-417-7865
Tube Tee

144177865
ST2069DN20-10Z2CND17-12-02: RNCC: 2 | RNVC: 2

22 Jul 1987

4730-14-242-1063
Tube Union

142421063
EN10242-U2-1-FE-A: RNCC: 2 | RNVC: 2
770331106: RNCC: 3 | RNVC: 2
331-1: RNCC: 5 | RNVC: 2
770 331 106: RNCC: 5 | RNVC: 2
E29801U2F: RNCC: 5 | RNVC: 9
253-1: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-565-5613
Hydraulic System Accessories Manifold

145655613
35500101: RNCC: 3 | RNVC: 2

2 Sep 2010

4730-14-213-8263

Load More Results