What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 85 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 85 of 185

4730-14-454-8711
Hose To Boss Straight Adapter

144548711
5000718496: RNCC: 3 | RNVC: 2

24 Apr 1992

4730-14-282-8581
Tube Tee

142828581
R8X8LX12: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-381-5360
Fluid Pressure Line Multiple Connector

143815360
218684: RNCC: 3 | RNVC: 2

25 Jan 1983

4730-14-408-7229
Tube-Hose Fitting Compression Sleeve

144087229
TXS12: RNCC: 3 | RNVC: 2

2 Apr 1986

4730-14-337-5696
Pipe Flange

143375696
522912: RNCC: 3 | RNVC: 2

7 Oct 1976

4730-14-541-7939
Tube To Boss Straight Adapter

145417939
E64209018000: RNCC: 3 | RNVC: 2

26 Jun 2004

4730-14-332-8980

4730-14-442-0882
Tube Union

144420882
4A16L26X150NU: RNCC: 3 | RNVC: 2
104104316: RNCC: 5 | RNVC: 2
5005030420: RNCC: 5 | RNVC: 2
5005030420: RNCC: 6 | RNVC: 9

1 Oct 1990

4730-14-434-6983
Adaptateur Bride

144346983
BN329515D2DN40INOX: RNCC: 3 | RNVC: 2

2 Oct 1989

4730-14-251-9148
Creux Boulon

4730-14-411-7073
Raccords De Sortie

144117073
5638161: RNCC: 3 | RNVC: 2
FOE5638161: RNCC: 5 | RNVC: 9

27 Aug 1986

4730-14-238-3363

4730-14-532-4460
Tube To Boss Swivel Joint

145324460
36991213: RNCC: 3 | RNVC: 2

30 Oct 2002

4730-14-528-3276
Flexible Tube Coupling Assembly

145283276
HA06A10MZ16A: RNCC: 3 | RNVC: 2

22 Jan 2002

4730-14-389-4710
Fluid Pressure Line Multiple Connector

143894710
365A61-2514-04: RNCC: 3 | RNVC: 2

20 Dec 1983

4730-14-460-2084
Tube To Boss Straight Adapter

144602084
KGE18M-1,2RK: RNCC: 3 | RNVC: 2

15 Jan 1993

4730-14-306-4493
Tube Coupling Nut Assembly

143064493
E-JET22V: RNCC: 3 | RNVC: 2
9520010356: RNCC: 5 | RNVC: 2
9520010356: RNCC: 5 | RNVC: 2
EJET22V: RNCC: 5 | RNVC: 2
KE-JET22V: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-207-3395
Fluid Passage Bolt

142073395
9775100034: RNCC: 3 | RNVC: 2
9775-10-00-34: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-539-9225
Tube Union

145399225
RCP10 08 150: RNCC: 3 | RNVC: 2
L01392F: RNCC: 5 | RNVC: 2
RCP10.08.150: RNCC: 5 | RNVC: 2

20 Feb 2004

4730-14-374-3968

4730-14-362-8784

4730-14-573-9281
Pipe Elbow

145739281
YDA.220.0444: RNCC: 3 | RNVC: 2

21 Nov 2012

4730-14-210-9783
Croix De Reduction

142109783
5CXR14X25X14X14: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-290-9532

4730-14-338-0842

4730-14-527-3847
Tube To Boss Swivel Joint

145273847
H145330A: RNCC: 3 | RNVC: 2

24 Oct 2001

4730-14-328-2573
Tube Coupling

143282573
ZA29C9XH: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-388-7536
Bulkhead Hose Connector

143887536
0000240890: RNCC: 3 | RNVC: 2

3 Nov 1983

4730-14-438-8301
Tube Coupling

144388301
DLT6124575: RNCC: 3 | RNVC: 2

9 Apr 1990

4730-14-527-1155
Tube To Boss Straight Adapter

145271155
10244728: RNCC: 3 | RNVC: 2

3 Oct 2001

4730-14-358-5786
Tube Coupling

143585786
824: RNCC: 3 | RNVC: 2

7 Sep 1979

4730-14-527-1696
Tube Coupling

145271696
160 26: RNCC: 3 | RNVC: 2
8034306E00: RNCC: 5 | RNVC: 2

10 Oct 2001

4730-14-416-1186
Bulkhead Hose Connector

144161186
213311: RNCC: 3 | RNVC: 2

3 Jun 1987

4730-14-355-9566
Tube To Boss Straight Adapter

143559566
DLT587755: RNCC: 3 | RNVC: 2

5 Apr 1979

4730-14-316-9577

4730-14-367-7264

4730-14-367-7037

4730-14-408-6442
Accouplemen Raccord

144086442
160G732010-29: RNCC: 3 | RNVC: 2

2 Apr 1986

4730-14-374-7567
Equipe Raccord

143747567
74510: RNCC: 3 | RNVC: 2
R303Z33: RNCC: 5 | RNVC: 9

30 Jan 1982

4730-14-380-4554

4730-14-308-2256

4730-14-316-9564

4730-14-571-9559
Pipe Nipple

145719559
461724: RNCC: 3 | RNVC: 2

25 May 2012

4730-14-341-1721

4730-14-575-0000
Hose Tee

145750000
7421168509: RNCC: 3 | RNVC: 2
7421168509: RNCC: 5 | RNVC: 2
21168509: RNCC: 5 | RNVC: 2

6 Mar 2013

4730-14-209-6501

4730-14-491-5972
Racc0rdcc0rd

144915972
81010813: RNCC: 3 | RNVC: 2
F300 0T 003 5638: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-378-6569

4730-14-278-3096
Tube To Boss Straight Adapter

142783096
10 12-14XG3-8GAZCY: RNCC: 3 | RNVC: 2
10 12-14XG3-8GAZCY: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-516-4256
Pipeline Flexible Spacer

145164256
803524090010: RNCC: 3 | RNVC: 2
SDM803524090010: RNCC: 5 | RNVC: 9

22 Sep 1999

4730-14-462-7411
Bulkhead Hose Connector

144627411
PM1A523169001: RNCC: 3 | RNVC: 2
PM1A523169001: RNCC: 5 | RNVC: 2

28 Apr 1993

4730-14-576-8401
Tube Elbow

145768401
D83204800000: RNCC: 3 | RNVC: 2

18 Jul 2013

4730-14-330-8841

4730-14-248-3153
Diaphragme

142483153
91637: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-217-3581
Tube Coupling Assembly

142173581
3901S63A: RNCC: 3 | RNVC: 2
3901S63A: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-492-2774
Union

144922774
0024248266: RNCC: 3 | RNVC: 2
F300 0T 007 2894: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-507-8461
Canne Equipee

145078461
MTFLXM9000100AA: RNCC: 3 | RNVC: 2
SAV001A: RNCC: 5 | RNVC: 2

21 Aug 1998

4730-14-032-1678
Pipe Flange

140321678
CMT30E9002PL2B150: RNCC: 3 | RNVC: 2

8 Dec 1981

4730-14-400-9505
Bulkhead Hose Connector

144009505
DA2C203513910: RNCC: 3 | RNVC: 2

21 May 1985

4730-14-462-7332
Tube Tee

144627332
PM1A742127001: RNCC: 3 | RNVC: 2
PM1A742127001: RNCC: 5 | RNVC: 2

28 Apr 1993

4730-14-375-7096
Tube To Boss Straight Adapter

143757096
4730AJ4.4DN20EQUIPE: RNCC: 2 | RNVC: 2
8405202166: RNCC: 3 | RNVC: 2

26 Feb 1982

4730-14-462-0221
Tube To Boss Straight Adapter

144620221
285780: RNCC: 3 | RNVC: 2

31 Mar 1993

4730-14-213-1652
Pipe Flange

142131652
47729: RNCC: 3 | RNVC: 2
47729: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-408-4497
Tube To Boss Straight Adapter

144084497
LW110-NC2024S: RNCC: 3 | RNVC: 2
8401208347NU: RNCC: 5 | RNVC: 2

27 Mar 1986

4730-14-259-7289
Tube To Boss Straight Adapter

142597289
202963: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-354-3382
Fluid Pressure Line Multiple Connector

143543382
164129: RNCC: 3 | RNVC: 2

31 Jan 1979

4730-14-509-1184
Quick Disconnect Coupling Half

145091184
931124: RNCC: 3 | RNVC: 2

21 Oct 1998

4730-14-513-5393
Tube Coupling Nut Assembly

145135393
D1849A-3.8+JIN002: RNCC: 3 | RNVC: 2
D1849 A3: RNCC: 5 | RNVC: 2

24 Mar 1999

4730-14-468-3903
Quick Disconnect Coupling Half

144683903
RBE06-2806FB: RNCC: 3 | RNVC: 2
91737856: RNCC: 5 | RNVC: 2

23 Feb 1994

4730-14-320-8669
Tube To Boss Straight Adapter

143208669
A7-70966: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-211-0282
Raccord Droit De Bo

142110282
NO PRIMARY REF14-211-0282: RNCC: 3 | RNVC: 2
49660: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-273-5105
Tube Coupling

142735105
7062BB1RPET2-36C337A: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-265-9722
Soufflet Detancheit

142659722
C0229AC8B182: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-558-8493
Tube Outlet

145588493
1379383: RNCC: 3 | RNVC: 2

14 Nov 2008

4730-14-554-1859
Flange To Hose Elbow

145541859
355 148: RNCC: 3 | RNVC: 2
355 148: RNCC: 3 | RNVC: 2

13 Jun 2007

4730-14-554-7107
Tube To Boss Straight Adapter

145547107
4657: RNCC: 3 | RNVC: 2

7 Aug 2007

4730-14-502-7763
Tube Tee

145027763
6V8792: RNCC: 3 | RNVC: 2

17 Dec 1997

4730-14-325-9013
Pipe Flange

143259013
AS34TV107REP9: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-388-8013
Pipe Flange

143888013
418102637: RNCC: 3 | RNVC: 2

29 Nov 1983

4730-14-424-3923
Fluid Pressure Line Multiple Connector

144243923
16765894: RNCC: 3 | RNVC: 2

19 May 1988

4730-14-306-2895
Quick Disconnect Coupling Half

143062895
6328: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-291-3987
Raccord Filete Equi

142913987
0268307760: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-402-1916
Tube To Boss Straight Adapter

144021916
16F64XS: RNCC: 3 | RNVC: 2

26 Jun 1985

4730-14-468-9441
Tube Tee

144689441
51.40.204.77: RNCC: 3 | RNVC: 2

30 Mar 1994

4730-14-540-7438
Anchor And Reinforcement Pipe Clamp

145407438
38052020: RNCC: 3 | RNVC: 2
ND069497: RNCC: 5 | RNVC: 2
4848ZG8613181514: RNCC: 6 | RNVC: 9

23 Apr 2004

4730-14-365-9665

4730-14-558-6886
Pipe To Tube To Hose Tee

145586886
81407501: RNCC: 3 | RNVC: 2

27 Oct 2008

4730-14-274-2407

4730-14-233-3855
Raccord Orientable

142333855
RA13106: RNCC: 3 | RNVC: 2
RA13106: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-301-0292
Buse

143010292
S12593DB: RNCC: 3 | RNVC: 2
S12593: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-245-1412
Te Tube Special

142451412
RA4X8X8: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-321-5808

4730-14-251-3066
Tuyau Caoutchouc Re

142513066
GI7648: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-252-7355

4730-14-273-5307

4730-14-564-4240
Tube Fitting Clinch Sleeve

145644240
8930405434: RNCC: 3 | RNVC: 2
A231004000104: RNCC: 5 | RNVC: 2

28 Apr 2010

4730-14-333-5204
Barillet A 4 Voies

143335204
GSM163-018F23: RNCC: 3 | RNVC: 2
GSM163-18F23: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-412-3057
Tube To Boss Straight Adapter

144123057
2607-25A: RNCC: 3 | RNVC: 2

8 Oct 1986

4730-14-562-5443
Fluid Pressure Line Multiple Connector

145625443
3119 08 10: RNCC: 3 | RNVC: 2
FS0002426: RNCC: 6 | RNVC: 9

3 Nov 2009

4730-14-315-3432
Fluid Pressure Line Multiple Connector

143153432
10381700: RNCC: 3 | RNVC: 2
720468: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-451-3802
Tube To Boss Straight Adapter

144513802
333003: RNCC: 3 | RNVC: 2

15 Nov 1991

4730-14-400-2460
Tube To Boss Straight Adapter

144002460
0000252310: RNCC: 3 | RNVC: 2

24 Apr 1985

4730-14-505-6973
Return Tube Bend

145056973
A49853: RNCC: 3 | RNVC: 2

26 Mar 1998

4730-14-032-1679
Pipe Flange

140321679
CMT30E9002PL2B175: RNCC: 3 | RNVC: 2

8 Dec 1981

4730-14-372-7930
Tube To Boss Straight Adapter

143727930
304-792-703-0: RNCC: 3 | RNVC: 2

21 Sep 1981

4730-14-262-1716
Pipe Flange

142621716
7062DL1F1M57-5-14CD2-5: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-440-1268
Quick Disconnect Coupling Half

144401268
RBE08-6810/4,5: RNCC: 3 | RNVC: 2
RBE08-6810-4,5: RNCC: 5 | RNVC: 2

11 Jul 1990

4730-14-495-6108
Union

144956108
F48375-72: RNCC: 3 | RNVC: 2
F300 0T 019 5380: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-297-8960
Bloc De Derivation

142978960
411MA0162FB26: RNCC: 3 | RNVC: 2
411MA162FB26: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-297-8256
Raccord Manometre

142978256
82403363: RNCC: 3 | RNVC: 2
403363: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-387-8023
Lubrication Fitting

143878023
S139: RNCC: 3 | RNVC: 9

12 Oct 1983

4730-14-449-3129
Flange To Boss Elbow

144493129
519B020: RNCC: 3 | RNVC: 2

7 Aug 1991

4730-14-370-7896
Fluid Pressure Line Multiple Connector

143707896
109-8JE12X100TF: RNCC: 3 | RNVC: 2

5 Jun 1981

4730-14-231-0885
Tube Coupling Inverted Nut

142310885
R5510: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-250-9547
Fluid Pressure Line Multiple Connector

142509547
80521: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-536-0470
Tube To Hose Straight Adapter

145360470
PE65404TE1816: RNCC: 3 | RNVC: 2

9 Jul 2003

4730-14-349-0163
Fluid Pressure Line Multiple Connector

143490163
R13008Z63: RNCC: 3 | RNVC: 2
RA13008Z63: RNCC: 5 | RNVC: 2

19 Apr 1978

4730-14-565-4291
Tube Elbow

145654291
W22LCFX: RNCC: 3 | RNVC: 2
A231004000328: RNCC: 5 | RNVC: 2

18 Aug 2010

4730-14-558-6057
Tube Coupling

145586057
86110210: RNCC: 3 | RNVC: 2
5010588547: RNCC: 5 | RNVC: 2

16 Oct 2008

4730-14-461-1982
Tube Union

144611982
5012004: RNCC: 3 | RNVC: 2

2 Mar 1993

4730-14-285-7458
Fluid Passage Bolt

142857458
007-01-00-251: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-235-8773
Tube To Boss Straight Adapter

142358773
12-10-12-17: RNCC: 3 | RNVC: 2
00375-92: RNCC: 5 | RNVC: 2
L00375-92: RNCC: 5 | RNVC: 2
711719: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-299-9190
Swivel Retaining Pipe Flange

142999190
RUAN7516-25: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-459-4270
Tuyau Porion

144594270
TAS550-3600: RNCC: 3 | RNVC: 2
85-694-6209: RNCC: 6 | RNVC: 9

26 Nov 1992

4730-14-457-7068
Pipe Fitting Flared Collar

144577068
89044-300: RNCC: 3 | RNVC: 2
RAR1552: RNCC: 5 | RNVC: 2
89044300: RNCC: 5 | RNVC: 2

16 Sep 1992

4730-14-281-6563
Raccord En Te

142816563
F7908: RNCC: 3 | RNVC: 9

1 Jan 1971

4730-14-572-8011
Tube Tee

145728011
ABS1153E050505: RNCC: 1 | RNVC: 2
ABS1153E050505: RNCC: 3 | RNVC: 2
ABS1153E050505: RNCC: 5 | RNVC: 2

3 Aug 2012

4730-14-339-9953
Ebauche Du Corps

143399953
401MA0399R1F4: RNCC: 3 | RNVC: 2
401MA399R1F4: RNCC: 5 | RNVC: 2

18 Jan 1977

4730-14-464-3069
Buse De Chauffe

144643069
857501151: RNCC: 3 | RNVC: 2
857501151: RNCC: 5 | RNVC: 2

28 Jul 1993

4730-14-500-6668
Tube To Boss Straight Adapter

145006668
E64201221003: RNCC: 3 | RNVC: 2
F300 0T 024 6859: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-536-0479
Tube To Hose Straight Adapter

145360479
PE65409E06: RNCC: 3 | RNVC: 2

9 Jul 2003

4730-14-497-2000
Quick-Disconnect Nipple

144972000
69151110: RNCC: 3 | RNVC: 2
F300 0T 022 8155: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-502-5976
Tube Tee

145025976
5005030833: RNCC: 3 | RNVC: 2
5005030833: RNCC: 6 | RNVC: 9

17 Dec 1997

4730-14-420-0915
Fluid Pressure Line Multiple Connector

144200915
219313: RNCC: 3 | RNVC: 2

18 Nov 1987

4730-14-361-0364
Pipe Flange

143610364
075-20-4011DN100: RNCC: 3 | RNVC: 2

19 Dec 1979

4730-14-553-8996
Fluid Flow Restrictor

145538996
353 113: RNCC: 3 | RNVC: 2
353 113: RNCC: 3 | RNVC: 2

29 May 2007

4730-14-558-1680
Tube Outlet

145581680
8043615: RNCC: 3 | RNVC: 2

9 Sep 2008

4730-14-432-3410
Tube To Boss Straight Adapter

144323410
UML-WCO-6-1/8: RNCC: 3 | RNVC: 9

7 Jun 1989

4730-14-356-0720

4730-14-462-2927
Quick-Disconnect Nipple

144622927
817: RNCC: 3 | RNVC: 2

15 Apr 1993

4730-14-553-7468
Fluid Flow Restrictor Unit

145537468
9898050524: RNCC: 3 | RNVC: 2

21 May 2007

4730-14-474-9706
Water Distribution Nozzle

144749706
6500024: RNCC: 3 | RNVC: 2

16 Mar 1995

4730-14-254-2158
Tube To Boss Straight Adapter

142542158
81010860: RNCC: 3 | RNVC: 2
ALL8M: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-349-7172
Fluid Pressure Line Multiple Connector

143497172
0000302260: RNCC: 3 | RNVC: 2

22 May 1978

4730-14-482-0802
Hose To Gas Fitting Straight Adapter

144820802
01231621: RNCC: 3 | RNVC: 2
0123 16 21: RNCC: 5 | RNVC: 2
1231621: RNCC: 5 | RNVC: 2
91537057: RNCC: 5 | RNVC: 2
F300 0T 023 5658: RNCC: 6 | RNVC: 9

20 Jun 1996

4730-14-270-2092
Tube To Boss Straight Adapter

142702092
12109R: RNCC: 3 | RNVC: 2
9567120000: RNCC: 5 | RNVC: 2
12109Z: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-405-5839
Tube To Boss Straight Adapter

144055839
M4Z6184902802: RNCC: 3 | RNVC: 2

4 Dec 1985

4730-14-402-1899
Tube Tee

144021899
JTXS32: RNCC: 3 | RNVC: 2

26 Jun 1985

4730-14-554-5934
Flange To Tube Elbow

145545934
0000371420: RNCC: 3 | RNVC: 2

23 Jul 2007

4730-14-426-8639
Fluid Passage Bolt

144268639
800056: RNCC: 3 | RNVC: 9
800056: RNCC: 5 | RNVC: 9

23 Sep 1988

4730-14-286-0395
Tube Tee

142860395
R6X8X6S: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-376-7603
Fluid Passage Bolt

143767603
52S0802001: RNCC: 3 | RNVC: 2

28 Apr 1982

4730-14-222-7308
Tube Tee

142227308
GSM1297FE3-25TABLEAU1: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-457-4708
Swivel Flange To Hose Connector

144574708
K10A50-203: RNCC: 3 | RNVC: 2
RAR1547: RNCC: 5 | RNVC: 2

5 Sep 1992

4730-14-434-3203
Tube To Boss Straight Adapter

144343203
OUT50307-4011: RNCC: 3 | RNVC: 2
0UT50307-4011: RNCC: 5 | RNVC: 2

20 Sep 1989

4730-14-298-4699
Tube Fitting Brazing Ferrule

142984699
GSM163-011F8-2Y: RNCC: 3 | RNVC: 2
GSM163-11-2Y: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-214-4852
Tube Tee

142144852
19X10-12X17C0NN: RNCC: 3 | RNVC: 2
0946710102: RNCC: 5 | RNVC: 2
0946710102: RNCC: 5 | RNVC: 9
946710102: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-395-3054
Tube Union

143953054
M2F: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-325-3723

4730-14-305-6623

4730-14-571-0972
Flange To Tube Straight Adapter

145710972
M2821317500000: RNCC: 3 | RNVC: 2

20 Feb 2012

4730-14-265-1595

4730-14-328-4674

4730-14-432-4142
Compensation Cale

144324142
I131CALEDN100MAR: RNCC: 3 | RNVC: 2

12 Jun 1989

4730-14-557-2657
Tube To Boss Straight Adapter

145572657
EGE20SREDCF: RNCC: 3 | RNVC: 2
A231004000627: RNCC: 5 | RNVC: 2

28 May 2008

4730-14-391-5667
Tube Union

143915667
0000725424: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-570-1970
Tube Elbow

145701970
P769587: RNCC: 3 | RNVC: 2
1KP877: RNCC: 5 | RNVC: 2

28 Nov 2011

4730-14-523-1070
Quick Disconnect Coupling Half

145231070
IB6NMC2: RNCC: 3 | RNVC: 2
IB6NMC2: RNCC: 5 | RNVC: 2

4 Jan 2001

4730-14-478-5912
Quick Disconnect Coupling Half

144785912
N01219790: RNCC: 3 | RNVC: 2

8 Nov 1995

4730-14-235-1901
Tube Tee

142351901
10RA10X8X10NUCB: RNCC: 3 | RNVC: 2
TRA10X8X10N: RNCC: 3 | RNVC: 2
1TR10X8X10NN: RNCC: 3 | RNVC: 2
210111008: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-453-1009
Tube To Hose Straight Adapter

144531009
16011550J: RNCC: 3 | RNVC: 2

5 Feb 1992

4730-14-461-9190
Fluid Pressure Line Multiple Connector

144619190
T700A3235088000: RNCC: 3 | RNVC: 2

31 Mar 1993

4730-14-413-6240
Tube Fitting Brazing Ferrule

144136240
15-25-3805: RNCC: 3 | RNVC: 9

6 Jan 1987

4730-14-382-4028
Fluid Pressure Line Multiple Connector

143824028
44326: RNCC: 3 | RNVC: 9

17 Feb 1983

4730-14-471-5222
Fluid Pressure Line Multiple Connector

144715222
16559699: RNCC: 3 | RNVC: 2
16559699: RNCC: 5 | RNVC: 9

31 Aug 1994

4730-14-334-8359

4730-14-372-6872

4730-14-399-1427
Fluid Passage Bolt

143991427
620714: RNCC: 3 | RNVC: 2

6 Mar 1985

4730-14-519-6444
Tube Tee

145196444
98641000023: RNCC: 3 | RNVC: 2

29 Mar 2000

4730-14-458-3481
Swivel Flange To Hose Elbow

144583481
20432: RNCC: 3 | RNVC: 9
91367929: RNCC: 5 | RNVC: 2

20 Oct 1992

4730-14-462-4594
Straight Tubing Connector

144624594
010295-02800MODIFIE25X200SI: RNCC: 3 | RNVC: 9

21 Apr 1993

4730-14-300-7528
Tube Tee

143007528
GSM523-026F48: RNCC: 3 | RNVC: 2
411MA127FB12: RNCC: 5 | RNVC: 2
GSM523-26F48: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-378-4795
Tube To Boss Straight Adapter

143784795
702A30-0956-20: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-270-6429
Fluid Pressure Line Multiple Connector

142706429
3180S54-10-904: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-461-0093
Tube Tee

144610093
S4710X0002-9732: RNCC: 2 | RNVC: 2
F0532S4710X0002-9732: RNCC: 3 | RNVC: 2
EMDAS05850: RNCC: 5 | RNVC: 2

17 Feb 1993

4730-14-377-2194
Tube To Boss Straight Adapter

143772194
3035671: RNCC: 3 | RNVC: 2

17 May 1982

4730-14-383-6321
Tube To Boss Straight Adapter

143836321
S3806: RNCC: 3 | RNVC: 2

11 Apr 1983

4730-14-451-2169
Hose To Boss Straight Adapter

144512169
PM1A526169006: RNCC: 3 | RNVC: 2
PM1A526169006: RNCC: 5 | RNVC: 2

6 Nov 1991

4730-14-459-1538
Fluid Filter Element

144591538
60961: RNCC: 3 | RNVC: 2
91610845: RNCC: 5 | RNVC: 2

19 Nov 1992

4730-14-342-5997

4730-14-347-4650
Tube Union

143474650
A11A522360603: RNCC: 3 | RNVC: 2

1 Mar 1978

4730-14-334-4683
Fluid Passage Bolt

143344683
320556: RNCC: 3 | RNVC: 2
8473205560: RNCC: 3 | RNVC: 2
0003045941: RNCC: 3 | RNVC: 2

1 Jun 1976

4730-14-325-8994
Pipe Flange

143258994
AS34TV105REP4: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-570-2264
Quick Disconnect Coupling Half

145702264
N01158909: RNCC: 3 | RNVC: 2
N01158909: RNCC: 5 | RNVC: 2

30 Nov 2011

4730-14-230-6052

4730-14-397-7045
Pipe Flange

143977045
MAT147-0043F10EQUIPEE: RNCC: 3 | RNVC: 2
GSM147-004F14EQUIPEE: RNCC: 3 | RNVC: 9
MAT147-0044: RNCC: 4 | RNVC: 1

14 Dec 1984

4730-14-218-3431
Spec Equipe Raccord

142183431
3919271: RNCC: 3 | RNVC: 2
3919-271: RNCC: 5 | RNVC: 2
3953-271: RNCC: 5 | RNVC: 2

1 Jan 1965

4730-14-031-6157
Tube To Boss Straight Adapter

140316157
MAT164-0310F1: RNCC: 3 | RNVC: 2
GSM164-038F6: RNCC: 5 | RNVC: 2

14 Jun 1980

4730-14-334-2454
Tube Tee

143342454
GSM163-004BF18: RNCC: 3 | RNVC: 2
GSM163-04BF18: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-227-5621
Graisseur Dair

142275621
NO PRIMARY REF14-227-5621: RNCC: 3 | RNVC: 2
TE879: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-567-9124
Sediment Strainer

145679124
335-100-501-0: RNCC: 3 | RNVC: 2

21 Apr 2011

4730-14-562-5440
Fluid Pressure Line Multiple Connector

145625440
3119 04 19: RNCC: 3 | RNVC: 2
FS0002423: RNCC: 6 | RNVC: 9

3 Nov 2009

4730-14-282-1143
Bloc De Raccordemen

142821143
8056: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-358-7339
Bulkhead Hose Connector

143587339
A11A232952001U2: RNCC: 3 | RNVC: 2

7 Sep 1979

4730-14-444-5224
Fluid Pressure Line Multiple Connector

144445224
123067209: RNCC: 3 | RNVC: 9

14 Jan 1991

4730-14-542-1984
Tube To Boss Straight Adapter

145421984
475434808: RNCC: 3 | RNVC: 2
475434808: RNCC: 5 | RNVC: 9

8 Jul 2004

4730-14-268-6499

4730-14-573-0110
Water Well Strainer

145730110
CLAPE00019: RNCC: 3 | RNVC: 2

3 Sep 2012

4730-14-389-7975
Tu Droit Adaptateur

4730-14-368-8821
Quick Disconnect Coupling Half

143688821
MX80DN40TYPEA: RNCC: 3 | RNVC: 2

10 Mar 1981

4730-14-462-2231
Droit Raccord

144622231
T700A2120085000: RNCC: 3 | RNVC: 2

15 Apr 1993

4730-14-548-6748
Fluid Pressure Line Multiple Connector

145486748
10560114: RNCC: 3 | RNVC: 2

30 Jan 2006

4730-14-540-7049
Tube Tee

145407049
38011070: RNCC: 3 | RNVC: 2
ND064661: RNCC: 5 | RNVC: 2
4848ZG8613180959: RNCC: 6 | RNVC: 9

21 Apr 2004

4730-14-397-9540
Tube To Boss Straight Adapter

143979540
430-901: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-228-9211
Fluid Passage Bolt

142289211
0095350: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-512-0376
Lubrication Fitting

145120376
10000174: RNCC: 3 | RNVC: 2
0000701: RNCC: 3 | RNVC: 2

3 Feb 1999

4730-14-553-9451
Tube Coupling

145539451
200014241: RNCC: 3 | RNVC: 2

4 Jun 2007

4730-14-553-8834
Tube To Boss Straight Adapter

145538834
223 099: RNCC: 3 | RNVC: 2
223 099: RNCC: 3 | RNVC: 2

29 May 2007

4730-14-508-9017
Bulkhead Hose Connector

145089017
H102874J: RNCC: 3 | RNVC: 2

7 Oct 1998

4730-14-434-3161
Tube To Boss Straight Adapter

144343161
557967: RNCC: 3 | RNVC: 2
557967: RNCC: 5 | RNVC: 2

20 Sep 1989

4730-14-347-2889
Tube To Boss Straight Adapter

143472889
9101343401: RNCC: 3 | RNVC: 2

19 Jan 1978

4730-14-543-8605
Tube To Boss Straight Adapter

145438605
560503366: RNCC: 3 | RNVC: 2

14 Dec 2004

4730-14-436-8785
Tube Coupling

144368785
RSM37947F16REP37: RNCC: 3 | RNVC: 2

8 Jan 1990

4730-14-553-9695
Quick Disconnect Coupling Assembly

145539695
200014237: RNCC: 3 | RNVC: 2

5 Jun 2007

4730-14-546-9036
Hydraulic System Accessories Manifold

145469036
9520011: RNCC: 3 | RNVC: 2

5 Sep 2005

4730-14-540-6651
Tube To Boss Straight Adapter

145406651
1030910048: RNCC: 3 | RNVC: 2
1030910048: RNCC: 5 | RNVC: 2

15 Apr 2004

4730-14-203-6453

4730-14-377-8118
Sediment Strainer Element

143778118
1030774: RNCC: 3 | RNVC: 9

10 Jun 1982

4730-14-321-9301
Piece Dadaptation

143219301
411MA0309F25REPX: RNCC: 3 | RNVC: 2
411MA309F25REPX: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-542-2051
Fluid-Emulsion Spray Nozzle

145422051
511062708: RNCC: 3 | RNVC: 2
511062708: RNCC: 5 | RNVC: 9

8 Jul 2004

4730-14-043-0254
Tube Coupling

140430254
PE60001K15: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-452-1984
Tube Union

144521984
45560048: RNCC: 3 | RNVC: 9

6 Jan 1992

4730-14-503-1726
Bulkhead Hose Connector

145031726
RA1M534004110A1: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-503-2072
Tube Coupling

145032072
RP1A504250067: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-200-5739

4730-14-376-7621
Tube To Boss Straight Adapter

143767621
111003000901: RNCC: 3 | RNVC: 2

28 Apr 1982

4730-14-359-6220
Pipe Flange

143596220
120411500: RNCC: 3 | RNVC: 9
120411-500: RNCC: 5 | RNVC: 9

15 Oct 1979

4730-14-495-3305
Fluid Passage Bolt

144953305
NO PRIMARY REF14-495-3305: RNCC: 3 | RNVC: 2
H0R1-4-1.4571: RNCC: 5 | RNVC: 9
F300 0T 019 0744: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-041-1907

4730-14-284-2118

4730-14-328-8664

4730-14-492-2799
Union

144922799
0024255461: RNCC: 3 | RNVC: 2
F300 0T 007 2951: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-264-9013

4730-14-405-0697
Tube Coupling

144050697
FILETAGE1MALE: RNCC: 3 | RNVC: 9

20 Nov 1985

4730-14-434-3063
Hydraulic Manifold Assembly

144343063
553441: RNCC: 3 | RNVC: 2

20 Sep 1989

4730-14-214-0129
Pipe Flange

142140129
65403: RNCC: 3 | RNVC: 9

1 Jan 1965

4730-14-325-9054
Pipe Flange

143259054
AS34TV106REP4: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-331-5831
Bulkhead Hose Connector

143315831
01160600: RNCC: 3 | RNVC: 2
427131: RNCC: 5 | RNVC: 2
1160600: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-553-4780
Flange To Boss Elbow

145534780
0000371280: RNCC: 3 | RNVC: 2

5 Apr 2007

4730-14-270-0117

4730-14-403-7506
Tube Tee

144037506
R6XS20: RNCC: 3 | RNVC: 2

21 Aug 1985

4730-14-224-9842

4730-14-457-6230
Tube To Boss Straight Adapter

144576230
PM1A752399001: RNCC: 3 | RNVC: 2
PM1A752399001: RNCC: 5 | RNVC: 2

10 Sep 1992

4730-14-570-6758
Union Thread Piece

145706758
1821 21 21: RNCC: 3 | RNVC: 2

17 Jan 2012

4730-14-495-4651
Tube To Boss Straight Adapter

144954651
U33752-0: RNCC: 3 | RNVC: 2
F300 0T 019 3033: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-573-0990
Quick Disconnect Coupling Half

145730990
N 010 222 00: RNCC: 3 | RNVC: 2
N01022200: RNCC: 5 | RNVC: 2

13 Sep 2012

4730-14-387-0502
Tube To Boss Straight Adapter

143870502
RBF03227: RNCC: 3 | RNVC: 2
8203490: RNCC: 5 | RNVC: 9

24 Aug 1983

4730-14-470-2796
Sediment Strainer Element

144702796
BSNGCGF004F23A: RNCC: 3 | RNVC: 2
BSNGCGF009F16A: RNCC: 5 | RNVC: 2
BSNGCGF005F23A: RNCC: 5 | RNVC: 2
BSNGCGF006F23A: RNCC: 5 | RNVC: 2

14 Jun 1994

4730-14-463-6982
Tube To Boss Straight Adapter

144636982
9DM8-12X100: RNCC: 3 | RNVC: 2
105124126: RNCC: 3 | RNVC: 2
5005030453: RNCC: 5 | RNVC: 2
5A8L-12X100: RNCC: 5 | RNVC: 2
5000497349: RNCC: 5 | RNVC: 2
5000497349: RNCC: 5 | RNVC: 9

23 Jun 1993

4730-14-503-1795
Bulkhead Hose Connector

145031795
RA1M543004180A1: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-552-8402
Tube Fitting Clinch Sleeve

145528402
D18LA3C: RNCC: 3 | RNVC: 2
431355: RNCC: 5 | RNVC: 2
D18LA3C: RNCC: 5 | RNVC: 9

7 Feb 2007

4730-14-275-1400
Tube To Boss Straight Adapter

142751400
12108: RNCC: 3 | RNVC: 2
503167: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-390-4752
Tube To Boss Straight Adapter

143904752
DLT604934: RNCC: 3 | RNVC: 2

26 Jan 1984

4730-14-300-7112
Pietement De Raccor

143007112
24117065800: RNCC: 3 | RNVC: 2
117J658: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-333-8741

4730-14-494-5481
Tube To Boss Straight Adapter

144945481
642 990 11: RNCC: 3 | RNVC: 2
F300 0T 017 4659: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-339-9945

4730-14-497-1920
Tube To Gas Fitting Straight Adapter

144971920
95000445: RNCC: 3 | RNVC: 2
F300 0T 022 8037: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-241-9120
Sediment Strainer Element

142419120
400324: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-466-3972
Self-Sealing Coupling Assembly

144663972
RS10FT: RNCC: 3 | RNVC: 2

3 Nov 1993

4730-14-402-2090
Tube To Boss Straight Adapter

144022090
91335889: RNCC: 3 | RNVC: 2

26 Jun 1985

4730-14-399-1430
Tube To Boss Straight Adapter

143991430
620736: RNCC: 3 | RNVC: 2

6 Mar 1985

4730-14-396-3679
Fluid Pressure Line Multiple Connector

143963679
476710N: RNCC: 3 | RNVC: 2

27 Nov 1984

4730-14-402-1898
Tube Tee

144021898
16JMTXS: RNCC: 3 | RNVC: 2
16JMTXS: RNCC: 3 | RNVC: 2
JTXS25: RNCC: 5 | RNVC: 2

26 Jun 1985

4730-14-221-8778
Raccord Special

142218778
C166: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-339-9922

4730-14-257-7667

4730-14-363-9496
Tube To Boss Straight Adapter

143639496
RA12-6-16X150: RNCC: 3 | RNVC: 2
RA126-16X150: RNCC: 5 | RNVC: 2
99058237: RNCC: 5 | RNVC: 2
99058237: RNCC: 5 | RNVC: 2

7 Aug 1980

4730-14-458-5150
Tube Coupling Inverted Nut

144585150
L327010: RNCC: 3 | RNVC: 2
91638472: RNCC: 5 | RNVC: 2
DBAL327010: RNCC: 5 | RNVC: 9
396597010: RNCC: 5 | RNVC: 9

23 Oct 1992

4730-14-546-4559
Quick Disconnect Coupling Half

145464559
QA 29031 00: RNCC: 3 | RNVC: 2
18767002-6: RNCC: 5 | RNVC: 2
5010631022: RNCC: 5 | RNVC: 2
QA29031-00: RNCC: 5 | RNVC: 2

6 Jul 2005

4730-14-432-3405
Straight Tubing Connector

144323405
31/7203: RNCC: 3 | RNVC: 2

7 Jun 1989

4730-14-427-3320
Tube Tee

144273320
4730HDING219,1X5,6-88,9X3,2: RNCC: 2 | RNVC: 2

13 Oct 1988

4730-14-443-4636
Tube To Boss Straight Adapter

144434636
4-588322-1: RNCC: 3 | RNVC: 2
4-588322-1: RNCC: 5 | RNVC: 9

23 Nov 1990

4730-14-289-8382
Tube-Hose Fitting Compression Sleeve

142898382
FIG111-6-8: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-408-1831
Bulkhead Hose Connector

144081831
401962-1: RNCC: 3 | RNVC: 2

19 Mar 1986

4730-14-471-9426
Diaphragmes Apparie

144719426
GA71269-6: RNCC: 3 | RNVC: 2

28 Sep 1994

4730-14-489-8476
Quick Disconnect Coupling Half

144898476
RBE11-7104/IC: RNCC: 3 | RNVC: 2

26 Aug 1997

4730-14-522-3547
Fluid Passage Bolt

145223547
43312CA160: RNCC: 2 | RNVC: 2
12160658: RNCC: 3 | RNVC: 2
3560-10CA: RNCC: 5 | RNVC: 2
BC3560-10CA: RNCC: 5 | RNVC: 2
P64502346: RNCC: 5 | RNVC: 2
44312CA100: RNCC: 5 | RNVC: 9

24 Oct 2000

4730-14-542-5237
Tube Tee

145425237
2594-104: RNCC: 3 | RNVC: 2

21 Jul 2004

4730-14-363-8028

4730-14-275-0328

4730-14-491-8673
Tube To Boss Straight Adapter

144918673
430754: RNCC: 3 | RNVC: 2
F300 0T 005 7609: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-495-7386
Bulkhead Hose Connector

144957386
103043X03014A: RNCC: 3 | RNVC: 2
103043X03014A: RNCC: 3 | RNVC: 9
F300 0T 019 7792: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-448-0685
Bulkhead Hose Connector

144480685
PM1A711022050: RNCC: 3 | RNVC: 2
PM1A711022050: RNCC: 5 | RNVC: 2

12 Jun 1991

4730-14-218-9345
Tube Coupling Inverted Nut

142189345
384: RNCC: 3 | RNVC: 2
384: RNCC: 5 | RNVC: 2
5922650: RNCC: 5 | RNVC: 2
0024385008: RNCC: 5 | RNVC: 2

1 Jan 1965

4730-14-268-0739
Sediment Strainer Element

142680739
B0553SV4APL2REP8F: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-219-7402
Tube Coupling

142197402
DNAR574: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-538-3139
Return Tube Bend

145383139
NGM0010035824006: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-350-3900
Pipe Flange

143503900
7932560790: RNCC: 3 | RNVC: 2
7056079000: RNCC: 5 | RNVC: 2
7932560790: RNCC: 5 | RNVC: 2

12 Jul 1978

4730-14-375-6858
Raccord Special

143756858
SNA990MC78100F60: RNCC: 3 | RNVC: 2

26 Feb 1982

4730-14-356-6307

4730-14-210-2858
Raccord Souple Equi

142102858
AF40C: RNCC: 3 | RNVC: 2
VDP4619: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-220-6173

4730-14-324-5399

4730-14-575-6577
Fluid Pressure Line Multiple Connector

145756577
FE400309001: RNCC: 3 | RNVC: 2

22 Apr 2013

4730-14-367-7417

4730-14-258-0644

4730-14-561-6133
Tube To Boss Straight Adapter

145616133
4M12F87OMLOS: RNCC: 3 | RNVC: 2
20 250 100 0520: RNCC: 5 | RNVC: 2

5 Aug 2009

4730-14-252-1720

4730-14-562-9121
Pipe Bushing

145629121
01691727: RNCC: 3 | RNVC: 2

3 Dec 2009

4730-14-290-1709

4730-14-218-3993

4730-14-414-4949
Tube To Boss Straight Adapter

144144949
8401212147NU: RNCC: 3 | RNVC: 2

4 Feb 1987

4730-14-230-7107
Pipe Flange

142307107
GSM1947REP4MALE: RNCC: 3 | RNVC: 2
GSM1947DET4MALE: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-254-2691
Tube To Boss Straight Adapter

142542691
A5659: RNCC: 3 | RNVC: 2
A6307: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-230-7146
Pipe Flange

142307146
GSM1947REP21FEMELLE: RNCC: 3 | RNVC: 2
GSM1947DET21FEMELLE: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-553-3944
Tube Coupling

145533944
M4721306000000: RNCC: 3 | RNVC: 2
M4721306000000: RNCC: 5 | RNVC: 2

29 Mar 2007

4730-14-549-6307
Tube Tee

145496307
PE66003E10: RNCC: 3 | RNVC: 2

24 Apr 2006

4730-14-535-8132
Lubrication Fitting

145358132
36402917: RNCC: 3 | RNVC: 2

25 Jun 2003

4730-14-313-4852
Sediment Strainer Body

143134852
401MA0386F4: RNCC: 3 | RNVC: 2
401MA386F4: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-040-6755
Tube Coupling

140406755
3751P12A: RNCC: 3 | RNVC: 2
3751P12A: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-355-7536
Tube To Boss Straight Adapter

143557536
RT22193: RNCC: 3 | RNVC: 2

30 Oct 2001

4730-14-301-0581
Tube To Boss Straight Adapter

143010581
23S10009: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-548-8009
Hydraulic System Accessories Manifold

145488009
AUT 0402J11A: RNCC: 3 | RNVC: 2

13 Feb 2006

4730-14-494-5526
Tube Tee

144945526
643 459 10: RNCC: 3 | RNVC: 2
F300 0T 017 4705: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-313-2595
Fuel Feeder Manifold

143132595
0243897250: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-365-9530
Quick Disconnect Coupling Assembly

143659530
SJA25CDB: RNCC: 3 | RNVC: 2

4 Nov 1980

4730-14-371-7131
Threaded Tube Fitting Plug

143717131
431-91600: RNCC: 3 | RNVC: 2
431-91600: RNCC: 3 | RNVC: 9

5 Aug 1981

4730-14-465-0532
Tube To Boss Straight Adapter

144650532
7361: RNCC: 3 | RNVC: 2

8 Sep 1993

4730-14-426-7776
Tube Tee

144267776
4730HEING076,1X4,5-48,3X3,6: RNCC: 2 | RNVC: 2

21 Sep 1988

4730-14-373-1168
Tube To Boss Straight Adapter

143731168
A12083-4: RNCC: 3 | RNVC: 2
A12083-4: RNCC: 5 | RNVC: 2

21 Sep 1981

4730-14-340-0888
Tube To Boss Straight Adapter

143400888
8-10-12XG3-8ACIER: RNCC: 3 | RNVC: 2
8-10-12XG3-8ACIER: RNCC: 3 | RNVC: 2

18 Jan 1977

4730-14-531-1454
Tube Fitting Clinch Sleeve

145311454
ESR06L-S: RNCC: 3 | RNVC: 2

24 Jul 2002

4730-14-347-4663
Pipe Flange

143474663
A11A522340011: RNCC: 3 | RNVC: 2

1 Mar 1978

4730-14-514-3681
Fluid Pressure Line Multiple Connector

145143681
RA1M726228001: RNCC: 3 | RNVC: 2

18 May 1999

4730-14-427-8513
Corps Special

144278513
AS34TQ104GREP26: RNCC: 3 | RNVC: 2

17 Nov 1988

4730-14-315-9458

4730-14-419-9463
Vis De Purge

144199463
2006E: RNCC: 3 | RNVC: 2

10 Nov 1987

4730-14-576-1822
Tube Coupling

145761822
M0003020000000: RNCC: 3 | RNVC: 2

4 Jun 2013

4730-14-576-1877
Pipe Elbow Assembly

145761877
610973: RNCC: 3 | RNVC: 2

4 Jun 2013

4730-14-575-9274
Fluid Pressure Line Multiple Connector

145759274
WH08LRKDSCF: RNCC: 3 | RNVC: 2
435949: RNCC: 5 | RNVC: 2

16 May 2013

4730-14-227-4626

4730-14-226-8833
Tube Coupling

142268833
GSM1363D1-57TABLEAU2: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-260-9189
Pipe Flange

142609189
7062CD1F1F48AF42-2: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-468-2587
Pipeline Flexible Spacer

144682587
30377-08: RNCC: 3 | RNVC: 2

16 Feb 1994

4730-14-416-1406
Flange To Boss Straight Adapter

144161406
NO PRIMARY REF14-416-1406: RNCC: 3 | RNVC: 2
Z52173: RNCC: 5 | RNVC: 9

3 Jun 1987

4730-14-411-1882
Fluid Pressure Line Multiple Connector

144111882
332A75-2221-20: RNCC: 3 | RNVC: 2

6 Aug 1986

4730-14-531-6149
Tube Coupling Nut Assembly

145316149
5396083: RNCC: 3 | RNVC: 2
B3051AS066REP61: RNCC: 5 | RNVC: 2
5396083: RNCC: 5 | RNVC: 2

4 Sep 2002

4730-14-448-5753
Tube Coupling

144485753
WBRAB6: RNCC: 3 | RNVC: 2
WBRAB6: RNCC: 3 | RNVC: 9

2 Jul 1991

4730-14-371-0526
Tube Tee

143710526
8450086566: RNCC: 3 | RNVC: 2

5 Jun 1981

4730-14-500-8061
Tube To Boss Straight Adapter

145008061
E64603000004: RNCC: 3 | RNVC: 2
F300 0T 024 8261: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-469-2531
Pipeline Flexible Spacer

144692531
DILATOFLEXNT200HHPN16: RNCC: 3 | RNVC: 2
98657300050: RNCC: 5 | RNVC: 2
ASSY112IP2: RNCC: 5 | RNVC: 2
NT1GZDN200PN16: RNCC: 5 | RNVC: 9

13 Apr 1994

4730-14-358-1881
Fluid Pressure Line Multiple Connector

143581881
47A6124: RNCC: 3 | RNVC: 2
47A6124: RNCC: 5 | RNVC: 2

13 Aug 1979

4730-14-362-4966
Tube To Boss Straight Adapter

143624966
002848282P: RNCC: 3 | RNVC: 2

19 Mar 1980

4730-14-397-9419
Bulkhead Hose Connector

143979419
PPA16NU: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-512-7392
Fluid Passage Bolt

145127392
800041113: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-463-2306
Tube To Boss Straight Adapter

144632306
LN326052REP1: RNCC: 3 | RNVC: 2

2 Jun 1993

4730-14-333-6188
Tube Tee

143336188
R10SX6X10M: RNCC: 3 | RNVC: 2

7 Mar 1996

4730-14-515-7525
Bouche D'arrivee

145157525
89090219100099A: RNCC: 3 | RNVC: 2

28 Jul 1999

4730-14-503-1850
Bulkhead Hose Connector

145031850
RA1M592004131: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-256-8825
Lubrication Fitting

142568825
9202141: RNCC: 3 | RNVC: 9

21 Oct 1981

4730-14-500-8037
Tube To Boss Straight Adapter

145008037
E64602000002: RNCC: 3 | RNVC: 2
F300 0T 024 8237: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-378-5640
Tube To Boss Straight Adapter

143785640
GA70875: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-214-1715

4730-14-401-2591
Pipe Flange

144012591
224269: RNCC: 3 | RNVC: 2

5 Jun 1985

4730-14-430-0268
Bloc Raccordement

144300268
2277-55-603: RNCC: 3 | RNVC: 2

24 Feb 1989

4730-14-363-2247

4730-14-237-7624

4730-14-216-1238

4730-14-561-9488
Tube Nipple

145619488
CR490522: RNCC: 3 | RNVC: 2

18 Sep 2009

4730-14-575-7833
Flange To Tube Elbow

145757833
M2811351200100: RNCC: 3 | RNVC: 2

30 Apr 2013

4730-14-369-7041
Tube-Hose Fitting Compression Sleeve

143697041
4730AB4.6POLYAM-DN20: RNCC: 2 | RNVC: 2
6016369000: RNCC: 3 | RNVC: 2
84242002: RNCC: 5 | RNVC: 2
LL023-NS20S: RNCC: 5 | RNVC: 2

17 Apr 1981

4730-14-347-6367
Fluid Pressure Line Multiple Connector

143476367
307272: RNCC: 3 | RNVC: 2
307272: RNCC: 5 | RNVC: 9

1 Mar 1978

4730-14-444-5393
Tube Coupling

144445393
F85BAB8M22: RNCC: 3 | RNVC: 2
A05050232: RNCC: 5 | RNVC: 2
A05050232: RNCC: 5 | RNVC: 9

15 Jan 1991

4730-14-257-6699
Tube To Boss Straight Adapter

142576699
12-6-1-8BGGSP2: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-213-0113
Fluid Passage Bolt

142130113
04122002: RNCC: 3 | RNVC: 2
4122: RNCC: 5 | RNVC: 2
0802615300: RNCC: 5 | RNVC: 2
16558713: RNCC: 5 | RNVC: 2
91466859: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-552-8191
Pipe Coupling Leak Repair Clamp

145528191
50151: RNCC: 3 | RNVC: 2

5 Feb 2007

4730-14-368-8795
Pipe Flange

143688795
CMT20E4003DN50REP4BRONZE: RNCC: 3 | RNVC: 2
CMT20E4003DN50REPABR0NZE: RNCC: 5 | RNVC: 2

10 Mar 1981

4730-14-285-3527
Tube To Boss Straight Adapter

142853527
9101148066: RNCC: 3 | RNVC: 2
CA1-14-20-150: RNCC: 5 | RNVC: 9
CA1-14-20X150: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-410-7724
Quick Disconnect Coupling Half

144107724
RBA06-1809/IA: RNCC: 3 | RNVC: 2
RBA6-1809IA: RNCC: 5 | RNVC: 2

9 Jul 1986

4730-14-399-8794
Quick Disconnect Coupling Assembly

143998794
N003106-78: RNCC: 3 | RNVC: 2
N003-106-78: RNCC: 5 | RNVC: 2
7729212209: RNCC: 5 | RNVC: 9

11 Apr 1985

4730-14-391-2980
Tu Droit Adaptateur

4730-14-279-0536

4730-14-233-9456
Embout Pour Tube Sp

142339456
11-19: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-552-1107
Straight Tubing Connector

145521107
0000380440: RNCC: 3 | RNVC: 2

27 Nov 2006

4730-14-455-5726
Tube-Hose Fitting Compression Sleeve

144555726
228177: RNCC: 3 | RNVC: 2
91727042: RNCC: 5 | RNVC: 2
228177: RNCC: 5 | RNVC: 2

28 May 1992

4730-14-228-0843
Tube Coupling

142280843
9781100632: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-364-0441
Fluid Passage Bolt

143640441
52S1003703: RNCC: 3 | RNVC: 2
52S1003703: RNCC: 5 | RNVC: 2

7 Aug 1980

4730-14-300-6443
Tube To Boss Straight Adapter

143006443
79575DET30: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-258-0719

4730-14-224-4924

4730-14-221-8218

4730-14-405-4435
Tube Coupling

144054435
CB2A28-1: RNCC: 3 | RNVC: 9

27 Nov 1985

4730-14-561-7203
Tube Elbow

145617203
ENPMB12: RNCC: 3 | RNVC: 2
ENPMB12: RNCC: 5 | RNVC: 9

26 Aug 2009

4730-14-254-7924

4730-14-362-0868

4730-14-222-7326

4730-14-395-3725
Tube Tee

143953725
N0189F8A: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-260-9239
Pipe Flange

142609239
7062DB1F1M394XC18: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-434-2917
Fluid Pressure Line Multiple Connector

144342917
562520: RNCC: 3 | RNVC: 2

20 Sep 1989

4730-14-328-2574
Tube Coupling

143282574
ZA29C9XJ: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-533-2491
Fluid Passage Bolt

145332491
V103466: RNCC: 3 | RNVC: 2

29 Jan 2003

4730-14-344-1013
Culotte

143441013
BF14: RNCC: 3 | RNVC: 2

13 Jul 1977

4730-14-253-5917

4730-14-578-4579
Tube To Boss Straight Adapter

145784579
222EB089: RNCC: 3 | RNVC: 2
A09903172: RNCC: 5 | RNVC: 2
Y00015355: RNCC: 5 | RNVC: 2

2 Dec 2013

4730-14-333-4047
Tube Coupling

143334047
0-3751S40A: RNCC: 3 | RNVC: 2
0-3751S40A: RNCC: 5 | RNVC: 9
AR03-06: RNCC: 5 | RNVC: 9
85-688-9411: RNCC: 6 | RNVC: 9

2 Jul 1975

4730-14-326-8349
Tube To Boss Straight Adapter

143268349
91052028: RNCC: 3 | RNVC: 2
A2-20-21X27BR: RNCC: 5 | RNVC: 9
A2-20-21-27BR: RNCC: 5 | RNVC: 9

2 Jul 1975

Load More Results