What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 84 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 84 of 185

4730-14-566-9518
Hose Elbow

145669518
3182 08 00: RNCC: 3 | RNVC: 2
102AB009: RNCC: 5 | RNVC: 2

20 Jan 2011

4730-14-362-1401

4730-14-292-7065

4730-14-236-1812
Raccord Special

142361812
A71-70966: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-283-1068

4730-14-315-9619

4730-14-279-5521

4730-14-461-0014
Tube Union

144610014
UFL14-3-8BSP: RNCC: 3 | RNVC: 2

17 Feb 1993

4730-14-561-7569
Tube Tee

145617569
3203 56 11: RNCC: 3 | RNVC: 2

2 Sep 2009

4730-14-564-6816
Tube Cap

145646816
VKA08CF: RNCC: 3 | RNVC: 2
VKA08CF: RNCC: 5 | RNVC: 2

26 May 2010

4730-14-456-0871

4730-14-567-5067
Fluid Passage Bolt

145675067
7400025167: RNCC: 3 | RNVC: 2
25167: RNCC: 5 | RNVC: 2

22 Mar 2011

4730-14-434-6988
Adaptateur Bride

144346988
BN329515D2DN20INOX: RNCC: 3 | RNVC: 2

2 Oct 1989

4730-14-387-8919
Tube To Boss Straight Adapter

143878919
721.D.16.16S: RNCC: 3 | RNVC: 2
P161D1616S: RNCC: 3 | RNVC: 2
74721D1616S: RNCC: 5 | RNVC: 2
721D16 16S: RNCC: 5 | RNVC: 2
721D16-16S: RNCC: 5 | RNVC: 2
74721D1616S: RNCC: 5 | RNVC: 2
721 D 16 16S: RNCC: 5 | RNVC: 2
721D1616S: RNCC: 5 | RNVC: 2

12 Oct 1983

4730-14-463-4657
Fluid Flow Restrictor

144634657
BN324598-168,3: RNCC: 2 | RNVC: 2

15 Jun 1993

4730-14-506-8597
Tube Coupling

145068597
JC1 2-1 4DR0IT: RNCC: 3 | RNVC: 2

27 May 1998

4730-14-262-1432

4730-14-365-3407

4730-14-221-9810

4730-14-526-4452
Bulkhead Hose Connector

145264452
RA1M592247100: RNCC: 3 | RNVC: 2

1 Aug 2001

4730-14-389-1660
Self-Sealing Coupling Assembly

143891660
5440818: RNCC: 3 | RNVC: 9

29 Nov 1983

4730-14-487-5126
Tube To Boss Straight Adapter

144875126
RA1M504863094: RNCC: 3 | RNVC: 2

10 Apr 1997

4730-14-456-6543
Tube Fitting Clinch Sleeve

144566543
DK6S: RNCC: 3 | RNVC: 2

17 Jul 1992

4730-14-441-0278
Fluid Passage Bolt

144410278
007606010P: RNCC: 3 | RNVC: 2

14 Aug 1990

4730-14-428-6589
Flange To Hose Straight Adapter

144286589
021147001101: RNCC: 3 | RNVC: 2

8 Dec 1988

4730-14-567-1051
Tube Tee

145671051
8274L1200: RNCC: 3 | RNVC: 2
8274L1200: RNCC: 5 | RNVC: 2

8 Feb 2011

4730-14-365-9496

4730-14-576-2198
Hose Clamp

145762198
ASNA0032H036: RNCC: 1 | RNVC: 2
ASNA0032H036: RNCC: 3 | RNVC: 2
ASNA0032H036: RNCC: 3 | RNVC: 9
ASNA0032H036: RNCC: 5 | RNVC: 2

6 Jun 2013

4730-14-253-2278

4730-14-261-1770

4730-14-234-6266

4730-14-523-7391
Tube To Boss Straight Adapter

145237391
Z5037597: RNCC: 3 | RNVC: 2
2115411103: RNCC: 3 | RNVC: 2

31 Jan 2001

4730-14-434-6579
Pipe Flange

144346579
1056-DN 150: RNCC: 3 | RNVC: 9

27 Sep 1989

4730-14-306-3138
Quick Disconnect Coupling Half

143063138
69272012: RNCC: 3 | RNVC: 2
561405: RNCC: 5 | RNVC: 2
14400647C: RNCC: 5 | RNVC: 2
5156140500: RNCC: 5 | RNVC: 2
RD112M: RNCC: 5 | RNVC: 9
69272012: RNCC: 5 | RNVC: 9
MAF0001002201: RNCC: 6 | RNVC: 9

1 Jan 1974

4730-14-368-2213
Tube To Boss Straight Adapter

143682213
909616007: RNCC: 3 | RNVC: 2
1405307007: RNCC: 5 | RNVC: 2
909616007: RNCC: 5 | RNVC: 2

20 Feb 1981

4730-14-333-7594

4730-14-561-7508
Hose Clamp

145617508
NORM BLI16-27/9: RNCC: 3 | RNVC: 2

2 Sep 2009

4730-14-394-0137
Tube Coupling

143940137
492-15090-0: RNCC: 3 | RNVC: 2
492-15090-0: RNCC: 3 | RNVC: 9

23 Jun 1984

4730-14-246-0475
Tube Tee

142460475
TE21-12-14X12-14X12-14: RNCC: 3 | RNVC: 2
TE21-12-14X12-14X12-14: RNCC: 3 | RNVC: 2
21 12-14X12-14X12-14: RNCC: 5 | RNVC: 2
061250525: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-564-5597
Tube To Boss Straight Adapter

145645597
GE28L3/4NPTCFX: RNCC: 3 | RNVC: 2
A231004000348: RNCC: 5 | RNVC: 2

5 May 2010

4730-14-540-3497
Tube Coupling Assembly

145403497
NNP4730848463311: RNCC: 3 | RNVC: 2

18 Mar 2004

4730-14-388-7535
Bulkhead Hose Connector

143887535
0000241010: RNCC: 3 | RNVC: 2

3 Nov 1983

4730-14-510-3951
Tube-Pipe Fitting Kit

145103951
SOJAG: RNCC: 3 | RNVC: 2
4730AA8023143: RNCC: 6 | RNVC: 9

4 Nov 1998

4730-14-214-4980
Tube Tee

142144980
R7612: RNCC: 3 | RNVC: 2
91352664: RNCC: 5 | RNVC: 2
91352664: RNCC: 5 | RNVC: 2

1 Jan 1965

4730-14-529-4889
Hose To Boss Straight Adapter

145294889
1820 10 13: RNCC: 3 | RNVC: 2

29 Mar 2002

4730-14-555-9982
Fluid Pressure Line Multiple Connector

145559982
0319734000: RNCC: 3 | RNVC: 2

21 Jan 2008

4730-14-494-5473
Tube To Boss Straight Adapter

144945473
642 440 12: RNCC: 3 | RNVC: 2
F300 0T 017 4650: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-298-5957

4730-14-560-5064
Fluid Passage Bolt

145605064
A13 714 150: RNCC: 3 | RNVC: 2
1580018: RNCC: 5 | RNVC: 9

27 Apr 2009

4730-14-229-6691

4730-14-321-9643

4730-14-322-5445

4730-14-393-3088
Tube Fitting Brazing Ferrule

143933088
4730GB0168,3: RNCC: 2 | RNVC: 2
BN324-551F4-168,3: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-333-5236
Barillet A 5 Voies

143335236
GSM163-022F7: RNCC: 3 | RNVC: 2
GSM163-22F7: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-517-0404
Tube Coupling Nut Assembly

145170404
KEJETISD16V: RNCC: 3 | RNVC: 2
KEJET1D16V: RNCC: 3 | RNVC: 9
613-700-029-0: RNCC: 5 | RNVC: 2

28 Oct 1999

4730-14-428-3312
Capotage Hydrauliqu

144283312
25377: RNCC: 3 | RNVC: 2

8 Dec 1988

4730-14-243-6118

4730-14-388-5940

4730-14-367-0348

4730-14-560-5066
Fluid Passage Bolt

145605066
A13 04: RNCC: 3 | RNVC: 2
1580221: RNCC: 5 | RNVC: 9

27 Apr 2009

4730-14-367-0389

4730-14-367-0373

4730-14-367-7992

4730-14-543-8224
Tube To Boss Straight Adapter

145438224
560502026: RNCC: 3 | RNVC: 2

11 Dec 2004

4730-14-367-7391

4730-14-242-8781
Fluid Pressure Line Multiple Connector

142428781
352004: RNCC: 3 | RNVC: 2
14942: RNCC: 5 | RNVC: 2
DBA352004: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-568-9354
Tube Elbow

145689354
CLS18: RNCC: 3 | RNVC: 2

21 Jul 2011

4730-14-362-3260

4730-14-278-1047

4730-14-250-9848

4730-14-206-4233
Tube Tee

142064233
EN10242-B1-1-FE-A: RNCC: 2 | RNVC: 2
770130106: RNCC: 3 | RNVC: 2
130-1: RNCC: 5 | RNVC: 2
770 130 106: RNCC: 5 | RNVC: 2
RAR1323: RNCC: 5 | RNVC: 2
E29801B1F: RNCC: 5 | RNVC: 9
50-1: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-417-1098
Tube To Gas Fitting Straight Adapter

144171098
42-10-8-13C0NU: RNCC: 3 | RNVC: 2
42-10-8-13CONU: RNCC: 5 | RNVC: 2

1 Jul 1987

4730-14-529-8294
Little Plate Pipes

145298294
DLT110478: RNCC: 3 | RNVC: 2

15 Apr 2002

4730-14-440-1216
Bride A Zinc

144401216
MAT162-0114F12: RNCC: 3 | RNVC: 2

11 Jul 1990

4730-14-562-5943
Pipeline Flexible Spacer

145625943
R1/200/KR 320-WG/E/AV: RNCC: 3 | RNVC: 2

5 Nov 2009

4730-14-345-6133
Lubrication Fitting

143456133
NO PRIMARY REF14-345-6133: RNCC: 3 | RNVC: 2
C6 1-4: RNCC: 5 | RNVC: 9
85-689-4087: RNCC: 6 | RNVC: 9

5 Oct 1977

4730-14-265-2382
Tube-Hose Fitting Compression Sleeve

142652382
NO PRIMARY REF14-265-2382: RNCC: 3 | RNVC: 2
DLT030385: RNCC: 5 | RNVC: 2
DLT030385: RNCC: 5 | RNVC: 9
5947: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-317-9895
Jeu Demi-Manchons

143179895
L25.GB.06: RNCC: 3 | RNVC: 2
L25GB06: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-468-3678
Quick-Disconnect Nipple

144683678
521 010-F: RNCC: 3 | RNVC: 2
1064527S00: RNCC: 5 | RNVC: 2

23 Feb 1994

4730-14-444-9971
Tube Union

144449971
F8RAB12M16X1-5: RNCC: 3 | RNVC: 2

30 Jan 1991

4730-14-292-8538

4730-14-427-9137
Tuyau Y Raccord

144279137
3684520: RNCC: 3 | RNVC: 2

22 Nov 1988

4730-14-221-6619
Mamelon Double Pour

142216619
A10-75-610-08-0: RNCC: 3 | RNVC: 2
A10-75-610-08-0: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-465-7029
Hydraulic System Accessories Manifold

144657029
Z00095-04: RNCC: 3 | RNVC: 2

6 Oct 1993

4730-14-426-7677
Tube Tee

144267677
4730HEING042,4X6,3-21,3X3,6: RNCC: 2 | RNVC: 2

21 Sep 1988

4730-14-349-5568
Fluid Pressure Line Multiple Connector

143495568
51524: RNCC: 3 | RNVC: 2
51-524: RNCC: 5 | RNVC: 2
51524: RNCC: 5 | RNVC: 2
501-802-200-0: RNCC: 5 | RNVC: 2
85-688-8787: RNCC: 6 | RNVC: 9

22 May 1978

4730-14-557-2819
Branched Tubing Connector

145572819
0R/C28003762: RNCC: 3 | RNVC: 2

29 May 2008

4730-14-304-0243

4730-14-240-0846

4730-14-558-8104
Pipe To Tube Elbow

145588104
8CMTXS: RNCC: 3 | RNVC: 2

7 Nov 2008

4730-14-568-1698
Pipe Cap

145681698
1502900001200: RNCC: 3 | RNVC: 2

11 May 2011

4730-14-313-8318
Raccord Tuyau Flexi

143138318
113RT12-14: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-225-3334
Raccord Special

142253334
54155: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-268-1178
Fluid Flow Restrictor Unit

142681178
6784-1CI14: RNCC: 2 | RNVC: 2
RUAN7530-14: RNCC: 3 | RNVC: 2
MEC11359: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-357-0926
Quick Disconnect Plug

143570926
MR4-8500-3IBSP: RNCC: 3 | RNVC: 2
2428131340: RNCC: 5 | RNVC: 2
2428131340: RNCC: 5 | RNVC: 9

7 Jun 1979

4730-14-481-5249
Tube Coupling

144815249
NO PRIMARY REF14-481-5249: RNCC: 3 | RNVC: 2
88980: RNCC: 5 | RNVC: 2
N88980: RNCC: 5 | RNVC: 2

15 May 1996

4730-14-554-2740
Hose Clamp

145542740
TORRO20-32/12C7W5: RNCC: 3 | RNVC: 2
TORRO 20-32/12 C7 W5: RNCC: 3 | RNVC: 2
TORRO 20-32/12 C7 W5: RNCC: 5 | RNVC: 2
CAE01828: RNCC: 5 | RNVC: 2

18 Jun 2007

4730-14-365-3399

4730-14-243-2722

4730-14-365-2858

4730-14-215-5859
Pointeau Du Limiteu

142155859
FKPU16X50B: RNCC: 3 | RNVC: 2
0948809297: RNCC: 5 | RNVC: 2
23266: RNCC: 5 | RNVC: 2
0948809297: RNCC: 5 | RNVC: 9
948809297: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-357-4145

4730-14-568-9775
Tube Tee

145689775
TS18: RNCC: 3 | RNVC: 2

25 Jul 2011

4730-14-398-0928
Tube To Gas Fitting Straight Adapter

143980928
ST159-2M112-2P16: RNCC: 3 | RNVC: 2
J05087-112-2000P016: RNCC: 5 | RNVC: 2

31 Jan 1985

4730-14-370-4647
Quick Disconnect Coupling Half

143704647
23MEPK324500005PL1TYPEA-REP3: RNCC: 3 | RNVC: 2
CMT30E9047PL1TYPEA-REP3-UE12: RNCC: 5 | RNVC: 2
CMT30L9047-3ABR0NZEUE12: RNCC: 5 | RNVC: 2

18 May 1981

4730-14-227-6571
Collier De Serrage

142276571
1050-12-191-14-0: RNCC: 3 | RNVC: 2
12-191-14-0: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-304-4689
Tube To Boss Straight Adapter

143044689
F781-002: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-468-1449
Fluid Pressure Line Multiple Connector

144681449
1400-957-03: RNCC: 3 | RNVC: 2
714650: RNCC: 5 | RNVC: 2
89296276: RNCC: 5 | RNVC: 2

9 Feb 1994

4730-14-289-4150
Drain Compart Prise

142894150
121E23-056-15-0: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-524-8714
Self-Sealing Coupling Assembly

145248714
NO PRIMARY REF14-524-8714: RNCC: 3 | RNVC: 2
S0M75-0-3-8-2064: RNCC: 5 | RNVC: 9

25 Apr 2001

4730-14-230-4833
Fluid Pressure Line Multiple Connector

142304833
L351013: RNCC: 3 | RNVC: 2
351013: RNCC: 5 | RNVC: 2
35439: RNCC: 5 | RNVC: 2
B295716: RNCC: 5 | RNVC: 2
4438-04: RNCC: 5 | RNVC: 2
TID5287: RNCC: 5 | RNVC: 2
295716: RNCC: 5 | RNVC: 9
711662: RNCC: 5 | RNVC: 9
118029: RNCC: 5 | RNVC: 9
DBAL351013: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-507-0510
Tube Tee

145070510
PE66750E06: RNCC: 3 | RNVC: 2

8 Jun 1998

4730-14-369-4411
Fluid Pressure Line Multiple Connector

143694411
NZ13: RNCC: 3 | RNVC: 2

17 Apr 1981

4730-14-558-6400
Pipe Locknut

145586400
11190219: RNCC: 3 | RNVC: 2

21 Oct 2008

4730-14-391-7154
Bulkhead Hose Connector

143917154
74552BP: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-319-6608
Tamis De Fi Flasque

143196608
23583B: RNCC: 3 | RNVC: 9

1 Jan 1975

4730-14-208-2853
Rallonge Speciale D

142082853
A24497: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-572-2396
Non-Metallic Connecting Sleeve

145722396
AMPC GENE E 290140: RNCC: 3 | RNVC: 2

18 Jun 2012

4730-14-536-0150

4730-14-431-3918
Tu Droit Adaptateur

4730-14-561-8124
Fluid Pressure Line Multiple Connector

145618124
SWVE08LMCF: RNCC: 3 | RNVC: 2
SWVE08LMCF: RNCC: 5 | RNVC: 9

9 Sep 2009

4730-14-241-5970
Prise Haute Pressio

142415970
402648: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-443-2869

4730-14-445-3019

4730-14-442-4752

4730-14-568-1631
Pipe Elbow

145681631
1500400002600: RNCC: 3 | RNVC: 2

11 May 2011

4730-14-565-7476
Lubrication Fitting

145657476
5010332866: RNCC: 3 | RNVC: 2
25335148: RNCC: 5 | RNVC: 2

20 Sep 2010

4730-14-269-1877
Pipe Flange

142691877
7066CD1M168-3: RNCC: 2 | RNVC: 2
4730BB-168,3M: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-489-1841
Fluid-Emulsion Spray Nozzle

144891841
70781-7,8MM: RNCC: 3 | RNVC: 2
4400-22-A-F55-7,8MM: RNCC: 5 | RNVC: 2

2 Jul 1997

4730-14-293-3364
Pipe Flange

142933364
121E52-125-02-0: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-562-3002
Tube Coupling

145623002
3824034660: RNCC: 3 | RNVC: 2

13 Oct 2009

4730-14-231-3277

4730-14-261-7892
Passage De Cloison

142617892
PCL14: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-561-4178
Hydraulic System Accessories Manifold

145614178
10390844: RNCC: 3 | RNVC: 2

16 Jul 2009

4730-14-365-9434

4730-14-240-2966
Bride Speciale

142402966
ST406M73P14: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-352-8616
Hose Coupling Assembly

143528616
9956783: RNCC: 3 | RNVC: 2

14 Nov 1978

4730-14-232-9048
Fluid Pressure Line Multiple Connector

142329048
0000300100: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-395-3704
Tube To Gas Fitting Straight Adapter

143953704
N0189F5A: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-352-8567
Tube To Boss Straight Adapter

143528567
1503: RNCC: 3 | RNVC: 2

14 Nov 1978

4730-14-235-3889
Fluid Pressure Line Multiple Connector

142353889
10916Z206: RNCC: 3 | RNVC: 2
10916S0F: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-399-0789
Tube Coupling Inverted Nut

143990789
603529: RNCC: 3 | RNVC: 2
603529: RNCC: 6 | RNVC: 9

6 Mar 1985

4730-14-294-0688
Quick Disconnect Coupling Half

142940688
E29572C100BZ: RNCC: 2 | RNVC: 2

1 Jan 1973

4730-14-378-6519
Tube To Boss Straight Adapter

143786519
8941081366: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-280-4502

4730-14-414-5522
Hydrauliq Reduction

144145522
534248: RNCC: 3 | RNVC: 2

11 Feb 1987

4730-14-229-8297

4730-14-577-2209
Tube-Pipe Fitting Kit

145772209
NO PRIMARY REF 14-577-2209: RNCC: 3 | RNVC: 2
419M217: RNCC: 5 | RNVC: 2

23 Aug 2013

4730-14-466-6835
Vanne De Dech Coude

144666835
365A54-5028-02: RNCC: 3 | RNVC: 2

24 Nov 1993

4730-14-360-9858
Tube Fitting Flared Sleeve

143609858
01270600: RNCC: 3 | RNVC: 2
0127 06 00: RNCC: 5 | RNVC: 2
0127-06-00: RNCC: 5 | RNVC: 2
5000495262: RNCC: 5 | RNVC: 2
1270600: RNCC: 5 | RNVC: 2
5000495262: RNCC: 5 | RNVC: 9

19 Dec 1979

4730-14-576-3037
Quick Disconnect Coupling Half

145763037
1989 061 151: RNCC: 3 | RNVC: 2

11 Jun 2013

4730-14-340-6361

4730-14-479-6542
Fluid Pressure Line Multiple Connector

144796542
1108-905: RNCC: 3 | RNVC: 2

30 Jan 1996

4730-14-417-3672
Tube To Boss Straight Adapter

144173672
5124226: RNCC: 3 | RNVC: 2

6 Jul 1987

4730-14-525-7912
Tube To Boss Straight Adapter

145257912
F145325: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-385-1710
Tube To Boss Straight Adapter

143851710
1021111080: RNCC: 3 | RNVC: 2
DAH1021111080: RNCC: 5 | RNVC: 9

26 Jul 1983

4730-14-496-2867
Tube To Boss Straight Adapter

144962867
165131: RNCC: 3 | RNVC: 2
F300 0T 021 3480: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-236-1345
Raccord Special

142361345
160-70782: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-494-9445
Tube To Boss Straight Adapter

144949445
5448638: RNCC: 3 | RNVC: 2
F300 0T 018 1005: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-422-0797
Anchor And Reinforcement Pipe Clamp

144220797
RISPAL5022PPDPALAS: RNCC: 3 | RNVC: 2

22 Feb 1988

4730-14-397-9404
Tube Tee

143979404
17-18NU: RNCC: 3 | RNVC: 2
TA18NNU: RNCC: 3 | RNVC: 2
10A18NU: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-342-5990
Tube-Hose Fitting Compression Sleeve

143425990
9009CPH4031: RNCC: 3 | RNVC: 2
9009CPH40311: RNCC: 5 | RNVC: 2

16 May 1977

4730-14-397-7286
Tube To Boss Straight Adapter

143977286
16017710E: RNCC: 3 | RNVC: 2
T23435: RNCC: 5 | RNVC: 2

14 Dec 1984

4730-14-330-1416
Tube To Boss Straight Adapter

143301416
401MA0184REPRC15: RNCC: 3 | RNVC: 2
401MA184REPRC15: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-574-7671
Pipeline Flexible Spacer

145747671
DIL K ARCN 125 PN10/16 COND/MAR: RNCC: 3 | RNVC: 2

18 Feb 2013

4730-14-389-3921
Embout Dadaptation

143893921
MKE02-11: RNCC: 3 | RNVC: 2

20 Dec 1983

4730-14-269-1989

4730-14-221-3106

4730-14-427-1099
Obturation Raccord

144271099
547707: RNCC: 3 | RNVC: 2

6 Oct 1988

4730-14-378-1664

4730-14-225-0568
Bouchon Filete

142250568
A158383LAITON-CHX: RNCC: 3 | RNVC: 2
214443: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-216-1224
Raccord Special

142161224
30010MEB: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-247-9414
Raccord Daccoupleme

142479414
110390: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-577-5982
Hose Reducer

145775982
058173: RNCC: 3 | RNVC: 2

26 Sep 2013

4730-14-335-7308

4730-14-307-8457
Ebauche Tubulure

143078457
B252FD4AREP5: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-367-0276

4730-14-335-9198

4730-14-232-6106

4730-14-388-3140
Voyant Pour Manchon

143883140
12.65.02.22: RNCC: 3 | RNVC: 2

3 Nov 1983

4730-14-556-5719
Tube To Hose Straight Adapter

145565719
718094: RNCC: 3 | RNVC: 2

25 Mar 2008

4730-14-294-2211

4730-14-365-9508

4730-14-226-8267

4730-14-407-5848
Compl Presse-Etoupe

144075848
223446-002: RNCC: 3 | RNVC: 2

27 Feb 1986

4730-14-340-2398
Jeu Filtre Tamis

143402398
3911-980-5800: RNCC: 3 | RNVC: 2
PX58-00: RNCC: 5 | RNVC: 9

14 Feb 1977

4730-14-472-0278
Threaded Tube Fitting Plug

144720278
MAT164-0160F3: RNCC: 3 | RNVC: 2

4 Oct 1994

4730-14-498-5654
Tube To Boss Straight Adapter

144985654
PAA58-53-001: RNCC: 3 | RNVC: 2
PAA5853001: RNCC: 3 | RNVC: 2
F300 0T 005 7256: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-573-7213
Tube To Boss Straight Adapter

145737213
1805 06 13: RNCC: 3 | RNVC: 2
18050613: RNCC: 5 | RNVC: 2

6 Nov 2012

4730-14-576-2252
Hose Mender

145762252
JDT 1010: RNCC: 3 | RNVC: 2
JDT1010: RNCC: 5 | RNVC: 9

6 Jun 2013

4730-14-230-7152
Pipe Flange

142307152
GSM1487DET5: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-236-1544
Bouchon Equipe Spec

142361544
523598: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-531-3143
Tube Fitting Socket Welded Ferrule

145313143
PA00407.47: RNCC: 3 | RNVC: 2

6 Aug 2002

4730-14-512-5141
Sediment Strainer Element

145125141
CREPI00874X00: RNCC: 3 | RNVC: 2

17 Feb 1999

4730-14-468-9446
Tube Tee

144689446
51.40.205.78: RNCC: 3 | RNVC: 2

30 Mar 1994

4730-14-211-2298
Tube To Boss Straight Adapter

142112298
8205: RNCC: 3 | RNVC: 2
8205: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-338-3851
Self-Sealing Coupling Assembly

143383851
S03AC: RNCC: 3 | RNVC: 2

6 Nov 1976

4730-14-528-6699
Fluid Pressure Line Multiple Connector

145286699
903916: RNCC: 3 | RNVC: 2

5 Feb 2002

4730-14-427-7544
Tube To Boss Straight Adapter

144277544
4A12L16X150C0CL 10NU: RNCC: 3 | RNVC: 2
4A12L16X150C0CL10NU: RNCC: 3 | RNVC: 2
804130735: RNCC: 5 | RNVC: 2
91699498: RNCC: 5 | RNVC: 2

9 Nov 1988

4730-14-465-5199
Sediment Strainer Element

144655199
A3-52856: RNCC: 3 | RNVC: 2

30 Sep 1993

4730-14-421-5992
Tube Union

144215992
20321532: RNCC: 3 | RNVC: 2

20 Jan 1988

4730-14-387-8592
Tube To Boss Straight Adapter

143878592
NO PRIMARY REF14-387-8592: RNCC: 3 | RNVC: 2
0026-151DN40: RNCC: 5 | RNVC: 9

12 Oct 1983

4730-14-568-1612
Quick Disconnect Coupling Half

145681612
IL 0097065: RNCC: 3 | RNVC: 2
M4ZS460D8419A: RNCC: 5 | RNVC: 9

11 May 2011

4730-14-360-5388

4730-14-391-7189
Auto Embout Raccord

143917189
435-16: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-400-3649
Tube To Boss Straight Adapter

144003649
DBGPA496: RNCC: 3 | RNVC: 2

24 Apr 1985

4730-14-256-1805
Fluid Passage Bolt

142561805
6743CCPA: RNCC: 3 | RNVC: 2
6743Z5CN18: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-489-5326
Tube To Boss Straight Adapter

144895326
20232530: RNCC: 3 | RNVC: 2

30 Jul 1997

4730-14-398-9440
Hose To Boss Straight Adapter

143989440
0506738: RNCC: 3 | RNVC: 2
FOE0506738: RNCC: 5 | RNVC: 9

6 Mar 1985

4730-14-378-6508
Tube To Boss Straight Adapter

143786508
4730AJ4.4DN30EQUIPE: RNCC: 2 | RNVC: 2
8405303466: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-400-9503
Bulkhead Hose Connector

144009503
DA2C203500154: RNCC: 3 | RNVC: 2

21 May 1985

4730-14-382-8995
Pipe Flange

143828995
192986: RNCC: 3 | RNVC: 2

17 Mar 1983

4730-14-207-6160
Tube Coupling Inverted Nut

142076160
E29601E12D: RNCC: 2 | RNVC: 2
392: RNCC: 3 | RNVC: 2
9202080: RNCC: 5 | RNVC: 2
0024385015: RNCC: 5 | RNVC: 2
303144: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-506-7478
Hose To Gas Fitting Straight Adapter

145067478
1760.131: RNCC: 3 | RNVC: 2
368620: RNCC: 5 | RNVC: 2

13 May 1998

4730-14-524-8769
Tube To Boss Straight Adapter

145248769
421727: RNCC: 3 | RNVC: 9

25 Apr 2001

4730-14-470-5364
Tube To Boss Straight Adapter

144705364
675: RNCC: 3 | RNVC: 2
89486731: RNCC: 5 | RNVC: 2

22 Jun 1994

4730-14-355-7914
Sediment Strainer Element

143557914
RECHARGET25: RNCC: 3 | RNVC: 2
16311487: RNCC: 5 | RNVC: 2
4205387: RNCC: 5 | RNVC: 2
007600016: RNCC: 5 | RNVC: 9
16311487: RNCC: 5 | RNVC: 9
16311487: RNCC: 5 | RNVC: 9
16311487: RNCC: 5 | RNVC: 9

19 Mar 1979

4730-14-474-9769
Pipeline Flexible Spacer

144749769
5506701: RNCC: 3 | RNVC: 2
5506701: RNCC: 3 | RNVC: 2
SYB2142: RNCC: 5 | RNVC: 2

16 Mar 1995

4730-14-540-3267
Tube Coupling Assembly

145403267
NNM0023513001525: RNCC: 3 | RNVC: 2

18 Mar 2004

4730-14-549-1443
Tube Tee

145491443
420173: RNCC: 3 | RNVC: 2

3 Mar 2006

4730-14-426-7961
Tube Tee

144267961
4730HEING219,1X12,5-60,3X4: RNCC: 2 | RNVC: 2

22 Sep 1988

4730-14-348-8564
Bulkhead Hose Connector

143488564
055U08-534183X: RNCC: 3 | RNVC: 2

19 Apr 1978

4730-14-320-0546
Fluid Pressure Line Multiple Connector

143200546
42251900: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-491-4420
Tube To Boss Straight Adapter

144914420
101437587: RNCC: 3 | RNVC: 2
F300 0T 002 9612: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-285-3921
Fluid Pressure Line Multiple Connector

142853921
0000362550: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-381-4646
Pipe Flange

143814646
2206-830A504: RNCC: 3 | RNVC: 2

25 Jan 1983

4730-14-509-1484
Hose To Boss Straight Adapter

145091484
HV6632127: RNCC: 3 | RNVC: 2
21114G17-6: RNCC: 5 | RNVC: 9

21 Oct 1998

4730-14-318-6903
Lubrication Fitting

143186903
GN 6: RNCC: 3 | RNVC: 2
GN6: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-367-7990

4730-14-262-9965
Bossage

142629965
DLT007374: RNCC: 3 | RNVC: 2
DLT007374: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-565-2170
Tube Elbow

145652170
820.015.050: RNCC: 3 | RNVC: 2
SA017495: RNCC: 5 | RNVC: 2

27 Jul 2010

4730-14-304-9268
Tube To Boss Straight Adapter

143049268
NO PRIMARY REF14-304-9268: RNCC: 3 | RNVC: 2
308302: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-301-0604
Fluid Passage Bolt

143010604
52S1002903: RNCC: 3 | RNVC: 2
52S10-29-3: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-259-9426
Tube Tee

142599426
NO PRIMARY REF14-259-9426: RNCC: 3 | RNVC: 2
26891: RNCC: 5 | RNVC: 9

1 Jan 1969

4730-14-207-8784
Tube To Boss Straight Adapter

142078784
22866: RNCC: 3 | RNVC: 9
19299: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-492-3261
Tube To Boss Straight Adapter

144923261
5000030324: RNCC: 3 | RNVC: 2
F300 0T 007 3957: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-445-7580
Fluid Pressure Line Multiple Connector

144457580
BLC235059: RNCC: 3 | RNVC: 2

25 Feb 1991

4730-14-369-7974
Fluid Passage Bolt

143697974
52S0802402: RNCC: 3 | RNVC: 2
52S0802402: RNCC: 5 | RNVC: 2

17 Apr 1981

4730-14-428-5554
Quick Disconnect Coupling Half

144285554
RAC077060001: RNCC: 3 | RNVC: 2

8 Dec 1988

4730-14-503-2184
Self-Sealing Coupling Assembly

145032184
C25263010: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-505-9813
Lubrication Fitting

145059813
3CM2151: RNCC: 3 | RNVC: 2

2 Apr 1998

4730-14-479-6987
Tube Coupling

144796987
9606171080: RNCC: 3 | RNVC: 2
000758: RNCC: 5 | RNVC: 2
434791: RNCC: 5 | RNVC: 9

31 Jan 1996

4730-14-420-8951
Tube To Boss Straight Adapter

144208951
8421259166: RNCC: 3 | RNVC: 2

23 Dec 1987

4730-14-388-7532
Bulkhead Hose Connector

143887532
0000240860: RNCC: 3 | RNVC: 2

3 Nov 1983

4730-14-434-3017
Fluid Pressure Line Multiple Connector

144343017
554544: RNCC: 3 | RNVC: 2

20 Sep 1989

4730-14-358-9594
Tube Tee

143589594
R4X12X12L: RNCC: 3 | RNVC: 2

7 Sep 1979

4730-14-332-6899
Tube Tee

143326899
411MA295R1F4: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-546-4619
Hose Connector Sleeve

145464619
5010579838: RNCC: 3 | RNVC: 2

6 Jul 2005

4730-14-336-1163
Tube To Boss Straight Adapter

143361163
161350: RNCC: 3 | RNVC: 2

24 Jul 1976

4730-14-410-9879
Tube To Boss Straight Adapter

144109879
91011278: RNCC: 3 | RNVC: 2

23 Jul 1986

4730-14-434-2918
Fluid Pressure Line Multiple Connector

144342918
562521: RNCC: 3 | RNVC: 2

20 Sep 1989

4730-14-403-8931

4730-14-260-2136
Raccord Special

142602136
SK17603M16-150: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-567-5043
Fuel Feeder Manifold

145675043
RM5289-0-00: RNCC: 3 | RNVC: 2

22 Mar 2011

4730-14-202-0330

4730-14-361-8944

4730-14-326-2831

4730-14-239-9435
Crepine

142399435
SBM089: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-314-1729

4730-14-041-3811
Raccord Droit Tourn

140413811
6AB: RNCC: 3 | RNVC: 9

1 Jan 1974

4730-14-200-4131

4730-14-221-6628

4730-14-303-7994

4730-14-564-3114
Pipe To Hose Straight Adapter

145643114
618086: RNCC: 3 | RNVC: 2

22 Apr 2010

4730-14-573-9626
Bulkhead Hose Connector

145739626
SV06LCF: RNCC: 3 | RNVC: 2
426275: RNCC: 5 | RNVC: 2

26 Nov 2012

4730-14-570-6087
Tube Reducer

145706087
2021006: RNCC: 3 | RNVC: 2
002424: RNCC: 5 | RNVC: 2

11 Jan 2012

4730-14-496-7508
Fluid Pressure Line Multiple Connector

144967508
Y00004254: RNCC: 3 | RNVC: 2
Y00004254: RNCC: 5 | RNVC: 9
SM12L1X/AVM011D2R5AHM01: RNCC: 5 | RNVC: 9
F300 0T 022 0118: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-405-1859
Tube To Boss Straight Adapter

144051859
G12-13-18X150NU: RNCC: 3 | RNVC: 2
UMAG13X18-150NNU: RNCC: 3 | RNVC: 2
4AG13-18X150NU: RNCC: 3 | RNVC: 2
10247: RNCC: 5 | RNVC: 2

27 Nov 1985

4730-14-427-3364
Tube Tee

144273364
4730HDING323,9X7,1-168,3X4,5: RNCC: 2 | RNVC: 2

13 Oct 1988

4730-14-577-3809
Quick Disconnect Coupling Assembly

145773809
TAP22FN: RNCC: 3 | RNVC: 2

11 Sep 2013

4730-14-335-3084
Raccord Hydrau Bloc

143353084
189039: RNCC: 3 | RNVC: 2

30 Jun 1976

4730-14-577-0164
Tube Coupling Nut Ring

145770164
BM411451: RNCC: 3 | RNVC: 2
4730MT0200518: RNCC: 6 | RNVC: 9

29 Jul 2013

4730-14-320-3054
Pipe Flange

143203054
0064771170: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-503-2081
Tube Coupling

145032081
RP1A504901041A1: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-397-9417
Bulkhead Hose Connector

143979417
PPA10NU: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-316-9988
Tube To Boss Straight Adapter

143169988
A31005: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-332-0653
Bulkhead Hose Connector

143320653
R7808Z50: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-365-3490

4730-14-460-1990
Tube Tee

144601990
10000 D3 0339: RNCC: 3 | RNVC: 2

14 Jan 1993

4730-14-554-1359
Hydraulic Swivel Joint

145541359
214 043: RNCC: 3 | RNVC: 2
214 043: RNCC: 3 | RNVC: 2

12 Jun 2007

4730-14-328-2609
Pipe Flange

143282609
ZA29C6XG: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-329-2823
Pipeline Flexible Spacer

143292823
I131NTH175MAR: RNCC: 2 | RNVC: 2
DILNTH175MAR: RNCC: 3 | RNVC: 2
DILNTH175MAR: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-210-9631

4730-14-365-3481

4730-14-365-3017

4730-14-421-6681
Sediment Strainer Element

144216681
00660: RNCC: 3 | RNVC: 2
00660: RNCC: 5 | RNVC: 9

25 Jan 1988

4730-14-400-0151
Fluid Passage Bolt

144000151
603906: RNCC: 3 | RNVC: 2

24 Apr 1985

4730-14-538-7202
Pipe Flange

145387202
NGM0010281516239: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-346-0368

4730-14-344-5056

4730-14-223-8688

4730-14-557-9670
Hose Tee

145579670
R1137227: RNCC: 3 | RNVC: 2

11 Aug 2008

4730-14-564-3324
Special Nipple

145643324
536410: RNCC: 3 | RNVC: 2

23 Apr 2010

4730-14-573-2594
Hose Elbow

145732594
1SE99510: RNCC: 3 | RNVC: 2

26 Sep 2012

4730-14-577-4123
Tube Coupling Nut

145774123
236895: RNCC: 3 | RNVC: 2

13 Sep 2013

4730-14-365-3491

4730-14-248-9795

4730-14-340-1222

4730-14-576-7490
Tube To Boss Elbow

145767490
RT.16.06.18: RNCC: 3 | RNVC: 2

9 Jul 2013

4730-14-562-6691
Tube To Hose Straight Adapter

145626691
3101 08 60: RNCC: 3 | RNVC: 2
B000337: RNCC: 5 | RNVC: 2
52017: RNCC: 5 | RNVC: 2

12 Nov 2009

4730-14-328-6353

4730-14-561-6057
Tube Tee

145616057
4R6MLOS: RNCC: 3 | RNVC: 2
20 236 911 2800: RNCC: 5 | RNVC: 2

4 Aug 2009

4730-14-442-5879
Raccord Degazage

144425879
5000659393: RNCC: 3 | RNVC: 2

22 Oct 1990

4730-14-225-0080

4730-14-217-6090
Tube Tee

142176090
TB14: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-278-8112
Tube Tee

142788112
10193AREP127: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-505-3981
Fluid Pressure Line Multiple Connector

145053981
12023023: RNCC: 3 | RNVC: 2

18 Mar 1998

4730-14-427-8511
Element Raccord

144278511
AS34TQ104GREP12A: RNCC: 3 | RNVC: 2

17 Nov 1988

4730-14-523-2391
Flange To Tube Straight Adapter

145232391
RA1M522404280: RNCC: 3 | RNVC: 2

10 Jan 2001

4730-14-418-6248
Tube Fitting Locknut

144186248
300-8X13BRONZE: RNCC: 3 | RNVC: 2

7 Sep 1987

4730-14-220-6105
Tube Tee

142206105
R10X6LX10: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-422-4372
Bulkhead Hose Connector

144224372
152010: RNCC: 3 | RNVC: 2

3 Mar 1988

4730-14-313-7110
Pipe Flange

143137110
0235550290: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-504-0626
Tube Coupling

145040626
NNP4730878750169: RNCC: 3 | RNVC: 2

5 Feb 1998

4730-14-313-2740
Swivel Retaining Pipe Flange

143132740
36233431: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-445-5955
Tube Tee

144455955
PEM20003B12: RNCC: 3 | RNVC: 2

19 Feb 1991

4730-14-333-5200
Barillet A 4 Voies

143335200
GSM163-018F13: RNCC: 3 | RNVC: 2
GSM163-18F13: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-520-3926
Bulkhead Hose Connector

145203926
AS2-0.000.247: RNCC: 3 | RNVC: 2

17 May 2000

4730-14-321-6337
Fluid Passage Bolt

143216337
702A30-0117-20: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-221-2168
Raccord A Joint Cou

142212168
GSM1297FE5-3TABLEAU1: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-303-0870
Tube Tee

143030870
91042000: RNCC: 3 | RNVC: 2
A7-20: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-295-6671
Tube To Boss Straight Adapter

142956671
UMA14X3-8BGSNNU: RNCC: 3 | RNVC: 2
4A14 3-8BGSNU: RNCC: 3 | RNVC: 2
M14V6B: RNCC: 3 | RNVC: 2
12-14 3-8BGSNU: RNCC: 3 | RNVC: 2
555676: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-474-7724
Tube To Boss Straight Adapter

144747724
3/8-16S: RNCC: 3 | RNVC: 2

1 Mar 1995

4730-14-378-1654

4730-14-298-0006

4730-14-261-7877

4730-14-485-5868
Tube Support Montag

144855868
PL1NA003AA012610: RNCC: 3 | RNVC: 2

30 Jan 1997

4730-14-340-6347

4730-14-339-1581

4730-14-572-3627
Flange To Tube Tee

145723627
M2821345100000: RNCC: 3 | RNVC: 2

28 Jun 2012

4730-14-560-6108
Pipe Elbow Assembly

145606108
10452156: RNCC: 3 | RNVC: 2

5 May 2009

4730-14-572-9404
Tube Coupling

145729404
B009648: RNCC: 3 | RNVC: 2

29 Aug 2012

4730-14-256-7017

4730-14-562-0039
Tube To Boss Tee

145620039
ET15LMEDOMDCF: RNCC: 3 | RNVC: 2
ET15LMEDOMDCF: RNCC: 5 | RNVC: 9

23 Sep 2009

4730-14-256-0574
Te Vabco

142560574
TB14UA9M2: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-273-5154

4730-14-240-7860
Bride De Retenue Ba

142407860
0000177750: RNCC: 3 | RNVC: 2
0000177750: RNCC: 5 | RNVC: 9
177750: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-563-0042
Quick Disconnect Plug

145630042
4200006160: RNCC: 3 | RNVC: 2

14 Dec 2009

4730-14-512-8261
Tube Union

145128261
209632: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-575-4567
Pipe Elbow

145754567
D235 04B: RNCC: 3 | RNVC: 2

8 Apr 2013

4730-14-295-0277
Diaphragme Special

142950277
AS34TQ109BREP1: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-314-6113

4730-14-252-1717

4730-14-464-0889
Flange To Grooved Clamp Straight Adapter

144640889
366A54-1155-20: RNCC: 3 | RNVC: 2

15 Jul 1993

4730-14-552-9196
Quick Disconnect Coupling Half

145529196
RCS06-2101: RNCC: 3 | RNVC: 2

13 Feb 2007

4730-14-393-8755
Tube To Boss Straight Adapter

143938755
NO PRIMARY REF14-393-8755: RNCC: 3 | RNVC: 2
980313: RNCC: 5 | RNVC: 9

7 Mar 1996

4730-14-232-6777
Tube To Boss Straight Adapter

142326777
NO PRIMARY REF14-232-6777: RNCC: 3 | RNVC: 2
98018: RNCC: 5 | RNVC: 9
98018: RNCC: 5 | RNVC: 9

22 Dec 1988

4730-14-344-4558
Bulkhead Hose Connector

143444558
EA1M704-70-840: RNCC: 3 | RNVC: 2

10 Aug 1977

4730-14-569-1052
Fluid Passage Bolt

145691052
A556937: RNCC: 3 | RNVC: 2

8 Aug 2011

4730-14-316-6714

4730-14-210-7210

4730-14-220-6575

4730-14-575-3256
Tube Tee

145753256
0000302680: RNCC: 3 | RNVC: 2

27 Mar 2013

4730-14-319-8916
Entree Huil Raccord

4730-14-273-5212

4730-14-381-1998
Graisseurs Ratelier

143811998
24183: RNCC: 3 | RNVC: 2
00024183: RNCC: 5 | RNVC: 2

25 Jan 1983

4730-14-494-5551
Graisseur

144945551
644 142 03: RNCC: 3 | RNVC: 2
F300 0T 017 4732: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-426-1065
Raccord Equipe

144261065
8814020227: RNCC: 3 | RNVC: 2

4 Aug 1988

4730-14-338-9062

4730-14-273-5193

4730-14-338-8894

4730-14-317-0598
Tube To Boss Straight Adapter

143170598
0000310140: RNCC: 3 | RNVC: 2

1 Jan 1975

Load More Results