What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 81 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 81 of 185

4730-14-541-8189
Tube To Gas Fitting Straight Adapter

145418189
RM8 1/4: RNCC: 3 | RNVC: 2
LX1177A00: RNCC: 5 | RNVC: 2

26 Jun 2004

4730-14-331-1602
Jeu Demi-Manchons

143311602
E50.06: RNCC: 3 | RNVC: 2
E50-06: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-429-2915
Tube Tee

144292915
F530-10-23: RNCC: 3 | RNVC: 2

11 Jan 1989

4730-14-404-5318
Self-Sealing Coupling Half

144045318
NO PRIMARY REF14-404-5318: RNCC: 3 | RNVC: 2
0687-62: RNCC: 5 | RNVC: 9

20 Nov 1985

4730-14-404-2907
Quick Disconnect Coupling Half

144042907
CROQ3-85BBECNMACHN: RNCC: 3 | RNVC: 2

18 Sep 1985

4730-14-269-1785
Pipe Flange

142691785
7066CB1-30: RNCC: 2 | RNVC: 2
4730BD-30: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-553-4796
Flange To Boss Elbow

145534796
0000370640: RNCC: 3 | RNVC: 2

5 Apr 2007

4730-14-524-0290
Tube Tee

145240290
2424-46: RNCC: 3 | RNVC: 2

22 Feb 2001

4730-14-453-8767
Hose To Boss Straight Adapter

144538767
564503: RNCC: 3 | RNVC: 2

12 Mar 1992

4730-14-528-4087
Tube Coupling Assembly

145284087
SIFLS1R001200F5: RNCC: 3 | RNVC: 2

25 Jan 2002

4730-14-386-4233
Tube Tee

143864233
TL6: RNCC: 3 | RNVC: 9
92E0703: RNCC: 5 | RNVC: 2

24 Aug 1983

4730-14-512-9308
Return Tube Bend

145129308
0121817: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-220-6111

4730-14-526-4684
Flange To Hose Straight Adapter

145264684
RA1M751213130: RNCC: 3 | RNVC: 2

1 Aug 2001

4730-14-325-8997
Pipe Flange

143258997
AS34TV105REP8: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-513-3695
Tube Coupling

145133695
N5131150: RNCC: 3 | RNVC: 2

17 Mar 1999

4730-14-525-6314
Return Tube Bend

145256314
20 236 913 5120: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-329-2203
Fluid Pressure Line Multiple Connector

143292203
F10A740005: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-547-1710
Tube Tee

145471710
93400311: RNCC: 3 | RNVC: 2
5005630074: RNCC: 5 | RNVC: 2

30 Sep 2005

4730-14-553-2748
Tube Coupling

145532748
872334: RNCC: 3 | RNVC: 2

20 Mar 2007

4730-14-537-0317
Tube To Hose Straight Adapter

145370317
1201083: RNCC: 3 | RNVC: 2

24 Sep 2003

4730-14-221-8777
Raccord Special

142218777
C146: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-367-3211

4730-14-229-8290

4730-14-317-9889
Jeu Demi-Manchons

143179889
E32.GB.06: RNCC: 3 | RNVC: 2
E32GB06: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-341-4989

4730-14-261-8468

4730-14-410-9185
Swivel Flange To Hose Connector

144109185
210088: RNCC: 3 | RNVC: 2

23 Jul 1986

4730-14-561-6040
Return Tube Bend

145616040
8C6MLOS: RNCC: 3 | RNVC: 2
20 250 100 0590: RNCC: 5 | RNVC: 2
003755: RNCC: 5 | RNVC: 2
4730PL0574190: RNCC: 6 | RNVC: 9

3 Aug 2009

4730-14-440-0739
Raccord-Bride Dn25

144400739
A3H93150: RNCC: 3 | RNVC: 2

10 Jul 1990

4730-14-274-4452

4730-14-350-2727
Graisseur Allonge

143502727
9207721: RNCC: 3 | RNVC: 9
BFC20848: RNCC: 5 | RNVC: 2
406044: RNCC: 5 | RNVC: 2

14 Jun 1978

4730-14-496-1486
Union

144961486
68014-0: RNCC: 3 | RNVC: 2
F300 0T 020 9625: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-269-1986

4730-14-348-4735

4730-14-347-7555
Tube To Boss Straight Adapter

143477555
GSM292-006F26: RNCC: 3 | RNVC: 2
A0184-005F26: RNCC: 5 | RNVC: 2

1 Mar 1978

4730-14-395-3178
Pipe Flange

143953178
CAA007-48,3FEMELLE: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-344-7132
Fluid Pressure Line Multiple Connector

143447132
EA1M744-001: RNCC: 3 | RNVC: 2

9 Sep 1977

4730-14-302-9838
Tube To Boss Straight Adapter

143029838
Q1-5204-18-24X150: RNCC: 3 | RNVC: 2
Q1-5204JC18-24X150: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-243-9462
Tube To Boss Straight Adapter

142439462
872-80: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-276-9902
Tube Tee

142769902
TR3-446-631X6222: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-453-9498
Tube To Hose Straight Adapter

144539498
LN324-100-11-073DN10: RNCC: 3 | RNVC: 2
RAB9489: RNCC: 5 | RNVC: 2

17 Mar 1992

4730-14-225-5624
Bride De Manoeuvre

142255624
773-410-332DET3: RNCC: 3 | RNVC: 2
773-410-332DET3: RNCC: 5 | RNVC: 9
773-410-332FF4: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-288-9028

4730-14-517-6500
Pipe Flange

145176500
CTT201730032A1: RNCC: 3 | RNVC: 2

5 Jan 2000

4730-14-515-2298
Tube Tee

145152298
0019521001: RNCC: 3 | RNVC: 2

13 Jul 1999

4730-14-371-0522
Tube Tee

143710522
8450086266: RNCC: 3 | RNVC: 2

5 Jun 1981

4730-14-371-0533
Tube Tee

143710533
84500852: RNCC: 3 | RNVC: 2

5 Jun 1981

4730-14-515-1688
Lubrication Fitting

145151688
A91000043: RNCC: 3 | RNVC: 2

9 Jul 1999

4730-14-416-5813
Tube Fitting Brazing Ferrule

144165813
4730GF-DN419I108: RNCC: 2 | RNVC: 2
4730GF-DN419I108: RNCC: 5 | RNVC: 2

18 Jun 1987

4730-14-461-1606
Adapter And Flange Assembly

144611606
7233949908: RNCC: 3 | RNVC: 2
7233949908: RNCC: 5 | RNVC: 2
5001001506: RNCC: 5 | RNVC: 2
5001001506: RNCC: 6 | RNVC: 9

24 Feb 1993

4730-14-447-9458
Fluid Flow Restrictor

144479458
170918: RNCC: 3 | RNVC: 2

10 Jun 1991

4730-14-524-5209
Tube To Boss Straight Adapter

145245209
813172: RNCC: 3 | RNVC: 2

21 Mar 2001

4730-14-268-6455

4730-14-515-3210
Fluid Flow Restrictor

145153210
2343454000: RNCC: 3 | RNVC: 2

13 Jul 1999

4730-14-449-4361
Tube-Pipe Fitting Kit

144494361
44029822: RNCC: 3 | RNVC: 2
44029822: RNCC: 5 | RNVC: 9

13 Aug 1991

4730-14-438-9557
Tube Tee

144389557
TI14: RNCC: 3 | RNVC: 9
9104140047: RNCC: 5 | RNVC: 2
A7 14INOX: RNCC: 5 | RNVC: 2
91517854: RNCC: 5 | RNVC: 2

11 Apr 1990

4730-14-333-8735

4730-14-356-6859

4730-14-336-7009
Coude Pour Tube

4730-14-363-5181

4730-14-212-1716

4730-14-499-2607
Tube To Boss Straight Adapter

144992607
5DS12-3-8R: RNCC: 3 | RNVC: 2
5DS12 3-8R: RNCC: 3 | RNVC: 9
705151183: RNCC: 5 | RNVC: 2
A07050839: RNCC: 5 | RNVC: 2
A07050839: RNCC: 5 | RNVC: 9
F300 0T 020 4986: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-412-3323
Quick Disconnect Coupling Half

144123323
RBE11-1154/IA/9: RNCC: 3 | RNVC: 2
RBE11-1154IA9: RNCC: 5 | RNVC: 2

8 Oct 1986

4730-14-280-9562
Cage Ac Moule Purg

142809562
E16932-1REP1: RNCC: 3 | RNVC: 9

1 Jan 1971

4730-14-229-1910
Bouchon Special Sou

142291910
3100-62: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-255-3645
Raccord Special

142553645
154461: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-405-5488
Tube Coupling

144055488
5000040082: RNCC: 3 | RNVC: 2

27 Nov 1985

4730-14-548-0620
Tube Tee

145480620
93406502: RNCC: 3 | RNVC: 2
5005630210: RNCC: 5 | RNVC: 2

8 Dec 2005

4730-14-395-0432
Flange To Tube Cross

143950432
0164162260: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-354-1146
Tube To Boss Straight Adapter

143541146
3042-003-0: RNCC: 3 | RNVC: 2

16 Jan 1979

4730-14-213-4237
Fluid Pressure Line Multiple Connector

142134237
50643-4-6: RNCC: 3 | RNVC: 2
MAF0001000420: RNCC: 6 | RNVC: 9

1 Jan 1964

4730-14-369-4395
Quick Disconnect Coupling Half

143694395
M0F20G3-4: RNCC: 3 | RNVC: 2

17 Apr 1981

4730-14-505-8730

4730-14-509-5837

4730-14-509-6248

4730-14-414-6294
Tube To Boss Straight Adapter

144146294
J05107-02-4200P003: RNCC: 3 | RNVC: 2

18 Feb 1987

4730-14-286-3954
Fluid Passage Bolt

142863954
670-160141: RNCC: 3 | RNVC: 2
679-160141: RNCC: 5 | RNVC: 2
5100105972: RNCC: 5 | RNVC: 2
1563-74: RNCC: 5 | RNVC: 2
9401563748: RNCC: 5 | RNVC: 2
9889993137: RNCC: 5 | RNVC: 2
91759726: RNCC: 5 | RNVC: 9
PUR670-160141: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-522-7745
Self-Sealing Coupling Assembly

145227745
N00440498: RNCC: 3 | RNVC: 2
SCB12.7104/IC/VR/KR/SP/N00440498: RNCC: 5 | RNVC: 2
91784160: RNCC: 5 | RNVC: 2

22 Nov 2000

4730-14-327-4365
Tube Tee

143274365
GSM163-014: RNCC: 3 | RNVC: 2
411MA364F6: RNCC: 5 | RNVC: 2
GSM163-14: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-457-6993
Pipe Joint Welding Ring

144576993
BN329514DN40INOX: RNCC: 3 | RNVC: 2
BN329-514DN40INOXEXTRUDE: RNCC: 3 | RNVC: 2

15 Sep 1992

4730-14-572-9241
Suction Pump Connector

145729241
NO PRIMARY REF 14-572-9241: RNCC: 3 | RNVC: 2
DEMI000030: RNCC: 5 | RNVC: 2

28 Aug 2012

4730-14-431-1552
Prolongateur Specia

144311552
6784-1DS28A: RNCC: 3 | RNVC: 9

10 Apr 1989

4730-14-250-4083
Tube To Boss Straight Adapter

142504083
D1010-655: RNCC: 3 | RNVC: 2
AT5611: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-323-4988

4730-14-221-9767

4730-14-564-0652
Hose Clamp

145640652
A430400100025: RNCC: 3 | RNVC: 2
302BA211: RNCC: 5 | RNVC: 2

6 Apr 2010

4730-14-273-5273

4730-14-367-7175

4730-14-372-7745

4730-14-434-6960
Adaptateur Bride

144346960
BN329515C2DN50INOX: RNCC: 3 | RNVC: 2

2 Oct 1989

4730-14-570-1069
Tube Union

145701069
NSA855111C4: RNCC: 1 | RNVC: 2
NSA855111C4: RNCC: 3 | RNVC: 2
NSA855111C4: RNCC: 5 | RNVC: 2

18 Nov 2011

4730-14-387-0511
Souflette Busette

143870511
8202965: RNCC: 3 | RNVC: 2
8202965: RNCC: 5 | RNVC: 9

24 Aug 1983

4730-14-282-8254

4730-14-390-4072
Siege De Filtre

143904072
401MA0574F1: RNCC: 3 | RNVC: 2

26 Jan 1984

4730-14-273-5209
Pipe Flange

142735209
7062TA1F1-76UA9NFEM: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-334-8357
Tube Fitting Clinch Sleeve

143348357
91242100: RNCC: 3 | RNVC: 2
BAH21: RNCC: 5 | RNVC: 9

2 Jun 1976

4730-14-525-4960
Tube To Boss Straight Adapter

145254960
L91050814: RNCC: 3 | RNVC: 2
L91050814: RNCC: 5 | RNVC: 9
SOGL91050814: RNCC: 5 | RNVC: 9

6 Jun 2001

4730-14-434-2054
Hydraulic System Accessories Manifold

144342054
552501: RNCC: 3 | RNVC: 2

12 Sep 1989

4730-14-395-3100
Pipeline Flexible Spacer

143953100
KLEDIL40GZ: RNCC: 3 | RNVC: 2
KLEDIL40GZ: RNCC: 5 | RNVC: 9

2 Oct 1984

4730-14-551-2123
Pipe Flange

145512123
RA1B722273: RNCC: 3 | RNVC: 2

6 Sep 2006

4730-14-382-5097
Fluid Pressure Line Multiple Connector

143825097
16766571: RNCC: 3 | RNVC: 2
16766571: RNCC: 5 | RNVC: 9

17 Feb 1983

4730-14-538-7875
Tube Coupling Assembly

145387875
NGM0011040382527: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-515-1720
Quick Disconnect Coupling Half

145151720
A95000012: RNCC: 3 | RNVC: 2

9 Jul 1999

4730-14-306-4501
Lubricant Pressure Relief Fitting

143064501
0210165030: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-364-7185
Tube Tee

143647185
R4X6LX6: RNCC: 3 | RNVC: 2

2 Sep 1980

4730-14-376-0300
Tube To Boss Straight Adapter

143760300
71454: RNCC: 3 | RNVC: 2

30 Mar 1982

4730-14-459-3231
Tube To Boss Straight Adapter

144593231
DLT606421: RNCC: 3 | RNVC: 2
RAR1615: RNCC: 5 | RNVC: 2

25 Nov 1992

4730-14-416-5745
Tube Fitting Brazing Ferrule

144165745
4730GF-DN88,9I108: RNCC: 2 | RNVC: 2
4730GF-DN88,9I108: RNCC: 5 | RNVC: 2

18 Jun 1987

4730-14-287-0554
Pipe Flange

142870554
RUAN7625M913P2D: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-519-9492
Tube To Boss Straight Adapter

145199492
813197: RNCC: 3 | RNVC: 2

26 Apr 2000

4730-14-436-6946
Fluid Pressure Line Multiple Connector

144366946
DA2C781231: RNCC: 3 | RNVC: 2

3 Jan 1990

4730-14-506-4001
Tube Coupling

145064001
3751P40A: RNCC: 3 | RNVC: 2
3751P40A: RNCC: 5 | RNVC: 2

22 Apr 1998

4730-14-413-4702
Quick Disconnect Coupling Half

144134702
BN324578F5: RNCC: 3 | RNVC: 2
BN324578F5DN125: RNCC: 3 | RNVC: 2
RAB9536: RNCC: 5 | RNVC: 2

17 Dec 1986

4730-14-214-1552
Raccord Special

142141552
R8606: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-297-8981
Bloc De Derivation

142978981
411MA0162FB15: RNCC: 3 | RNVC: 2
411MA162FB15: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-511-6623
Quick Disconnect Coupling Half

145116623
NC4034010: RNCC: 3 | RNVC: 2

8 Jan 1999

4730-14-242-8012

4730-14-295-7961

4730-14-294-7290

4730-14-411-7159
Tube Tee

144117159
NO PRIMARY REF14-411-7159: RNCC: 3 | RNVC: 2
397917: RNCC: 5 | RNVC: 2
17455: RNCC: 5 | RNVC: 9

27 Aug 1986

4730-14-459-2508
Tube To Gas Fitting Straight Adapter

144592508
01141217: RNCC: 3 | RNVC: 2
0114-12-17: RNCC: 5 | RNVC: 2

19 Nov 1992

4730-14-343-9212
Pipe Flange

143439212
CR0Q012-168-3FEMELLE: RNCC: 3 | RNVC: 2
7062TD1F1F168-3UA9NFEM: RNCC: 4 | RNVC: 1
4730CG-168,3F: RNCC: 5 | RNVC: 2

13 Jul 1977

4730-14-301-9876
Sediment Strainer Element

143019876
NO PRIMARY REF14-301-9876: RNCC: 3 | RNVC: 2
216873: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-313-0334
Tube To Boss Straight Adapter

143130334
A2-72137: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-526-1650
Self-Sealing Coupling Assembly

145261650
N00327898: RNCC: 3 | RNVC: 2
SCB20.7105/IC/VR/KB/SP-N00327898: RNCC: 5 | RNVC: 2
SCB207105IC/VR/KB/SP: RNCC: 5 | RNVC: 2
SCB207195IC/VR/KB/SP: RNCC: 5 | RNVC: 2
91790270: RNCC: 5 | RNVC: 2
SCB20.7195/IC/VR/KB/SP-N00327898: RNCC: 5 | RNVC: 2
91790270: RNCC: 5 | RNVC: 9

4 Jul 2001

4730-14-462-7183
Tube Tee

144627183
SUD0130CU14-14-12: RNCC: 3 | RNVC: 9
130CU14-14-12: RNCC: 5 | RNVC: 2
SUD0130CU14-14-12: RNCC: 5 | RNVC: 2
130CU14-14-12: RNCC: 5 | RNVC: 9
SUD0130CU14-14-12: RNCC: 5 | RNVC: 9
130CU14-14-12: RNCC: 5 | RNVC: 9

28 Apr 1993

4730-14-485-7984
Threaded Tube Fitting Plug

144857984
438623: RNCC: 3 | RNVC: 2
438623-001: RNCC: 5 | RNVC: 9

12 Feb 1997

4730-14-330-8797
Tube To Boss Straight Adapter

143308797
91141421: RNCC: 3 | RNVC: 2
A4-14-15X21: RNCC: 5 | RNVC: 9
A4-14-15-21CYL: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-427-4065
Tube To Boss Straight Adapter

144274065
2103-01-17-00: RNCC: 3 | RNVC: 9
9610000320: RNCC: 5 | RNVC: 2
32-140-32: RNCC: 5 | RNVC: 9

18 Oct 1988

4730-14-427-3392
Tube To Boss Straight Adapter

144273392
Q1-5GE14SRK12X17CO: RNCC: 3 | RNVC: 2
921614: RNCC: 5 | RNVC: 2
Q1-5GE14SR3/8BSPK: RNCC: 5 | RNVC: 2

13 Oct 1988

4730-14-392-9364
Tube Tee

143929364
0024248779: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-494-5483
Tube To Boss Straight Adapter

144945483
643 017 10: RNCC: 3 | RNVC: 2
F300 0T 017 4661: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-512-8517
Tube Coupling

145128517
222483: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-512-9053
Fluid-Emulsion Spray Nozzle

145129053
552710: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-436-2742
Tube To Boss Straight Adapter

144362742
01011221: RNCC: 3 | RNVC: 2
439-688: RNCC: 5 | RNVC: 2

13 Dec 1989

4730-14-401-8081
Tube Coupling

144018081
0X152: RNCC: 3 | RNVC: 2

13 Jun 1985

4730-14-216-1561
Obturateur Special

142161561
A1-72878: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-560-5177
Tube Coupling

145605177
GC6573-0606: RNCC: 3 | RNVC: 2
GC 6573-0606: RNCC: 5 | RNVC: 9

28 Apr 2009

4730-14-223-3386
Bouchon Equipe

142233386
G1248: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-556-9908
Hose To Gas Fitting Straight Adapter

145569908
P032200: RNCC: 3 | RNVC: 2
KIT0000010: RNCC: 5 | RNVC: 2

25 Apr 2008

4730-14-273-5192

4730-14-561-0713
Lubrication Fitting

145610713
5002212: RNCC: 3 | RNVC: 2
5002212: RNCC: 5 | RNVC: 2
5002212: RNCC: 5 | RNVC: 2

12 Jun 2009

4730-14-323-9036

4730-14-323-9039

4730-14-424-3542
Tube Union

144243542
4AG13-16X150NU: RNCC: 3 | RNVC: 2

19 May 1988

4730-14-462-2116
Tube To Boss Straight Adapter

144622116
002137584L: RNCC: 3 | RNVC: 2
L21375-84: RNCC: 5 | RNVC: 2

15 Apr 1993

4730-14-427-0411
Tube Union

144270411
169-16E: RNCC: 3 | RNVC: 2
85-693-7463: RNCC: 6 | RNVC: 9

5 Oct 1988

4730-14-280-3097
Pietement Pour Robi

142803097
NO PRIMARY REF14-280-3097: RNCC: 3 | RNVC: 2
206H1488: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-484-2788
Tuyauterie Calotte

144842788
3202-30: RNCC: 3 | RNVC: 2

31 Oct 1996

4730-14-265-1594
Pipe Flange

142651594
553-000MA018DN65DE76: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-553-1174
Swivel Flange To Hose Straight Adapter

145531174
GFS63-16SCFX: RNCC: 3 | RNVC: 2
437199: RNCC: 5 | RNVC: 2
GFS63-16SCFX: RNCC: 5 | RNVC: 9

5 Mar 2007

4730-14-298-4695
Tube Fitting Brazing Ferrule

142984695
GSM163-011F8-2U: RNCC: 3 | RNVC: 2
GSM163-11-2U: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-498-3941
Tube Tee

144983941
91961242: RNCC: 3 | RNVC: 2
12-05-02-113: RNCC: 5 | RNVC: 9
F300 0T 004 9961: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-300-7531
Tube Tee

143007531
GSM523-026F50: RNCC: 3 | RNVC: 2
411MA127FB15: RNCC: 5 | RNVC: 2
GSM523-26F50: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-524-2435
Fluid Passage Bolt

145242435
GF01187: RNCC: 3 | RNVC: 2
GF01187: RNCC: 5 | RNVC: 9

7 Mar 2001

4730-14-360-7193
Fluid Pressure Line Multiple Connector

143607193
BAZ94843: RNCC: 3 | RNVC: 2

19 Dec 1979

4730-14-244-4960
Tube To Boss Straight Adapter

142444960
40072: RNCC: 3 | RNVC: 2
512747: RNCC: 5 | RNVC: 2

1 Jan 1968

4730-14-329-2808
Pipeline Flexible Spacer

143292808
I131NTE100STR: RNCC: 2 | RNVC: 2
DILNTE100STR: RNCC: 3 | RNVC: 9

2 Jul 1975

4730-14-332-0621
Bulkhead Hose Connector

143320621
R5708Z10: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-401-0298
Tube To Gas Fitting Straight Adapter

144010298
01051427: RNCC: 3 | RNVC: 2

21 May 1985

4730-14-502-7831
Return Tube Bend

145027831
7C3455: RNCC: 3 | RNVC: 2

17 Dec 1997

4730-14-432-3015
Fluid Pressure Line Multiple Connector

144323015
BJIWCYL14: RNCC: 3 | RNVC: 9

2 Jun 1989

4730-14-361-5239
Pipe Flange

143615239
DID43005: RNCC: 3 | RNVC: 2

24 Jan 1980

4730-14-306-4500
Fluid Pressure Line Multiple Connector

143064500
0235557170: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-462-7154
Tube To Boss Straight Adapter

144627154
SBE1129: RNCC: 3 | RNVC: 2

28 Apr 1993

4730-14-528-9162
Tube Coupling

145289162
8931293872: RNCC: 3 | RNVC: 2

22 Feb 2002

4730-14-513-5211
Fluid Flow Restrictor Unit

145135211
68G2056: RNCC: 3 | RNVC: 2

23 Mar 1999

4730-14-454-0401
Fluid Pressure Line Multiple Connector

144540401
15340560: RNCC: 3 | RNVC: 2
15340560: RNCC: 5 | RNVC: 9

19 Mar 1992

4730-14-543-8002
Tube To Boss Straight Adapter

145438002
9320650: RNCC: 3 | RNVC: 2

11 Dec 2004

4730-14-519-0032
Sediment Strainer Element

145190032
8565: RNCC: 3 | RNVC: 2

1 Mar 2000

4730-14-200-2031
Self-Sealing Coupling Assembly

142002031
43944: RNCC: 3 | RNVC: 2

1 Jan 1962

4730-14-552-1661
Tube To Boss Straight Adapter

145521661
481963: RNCC: 3 | RNVC: 2

29 Nov 2006

4730-14-536-5756
Quick Disconnect Coupling Half

145365756
590052: RNCC: 3 | RNVC: 2

2 Sep 2003

4730-14-211-2296
Tube To Boss Straight Adapter

142112296
8125: RNCC: 3 | RNVC: 2
8125: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-431-2738
Bague Moletee

144312738
2310210012: RNCC: 3 | RNVC: 2

12 Apr 1989

4730-14-259-7585

4730-14-344-8293

4730-14-215-2431

4730-14-489-2642
Fluid Passage Bolt

144892642
0000158444: RNCC: 3 | RNVC: 2
F300 0T 007 0894: RNCC: 6 | RNVC: 9

9 Jul 1997

4730-14-417-0760
Tube Fitting Flared Sleeve

144170760
109092: RNCC: 3 | RNVC: 2

1 Jul 1987

4730-14-465-4053
Threaded Tube Fitting Plug

144654053
H47300003AA: RNCC: 3 | RNVC: 2

28 Sep 1993

4730-14-243-5781

4730-14-245-7154

4730-14-227-2195
Bride Speciale

142272195
DLT002994: RNCC: 3 | RNVC: 2
DLT02994: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-304-7596
Embase De Purge

143047596
E4M241-13-62: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-442-8231
Fluid Passage Bolt

144428231
NO PRIMARY REF14-442-8231: RNCC: 3 | RNVC: 2
VCMD10/100: RNCC: 5 | RNVC: 9

6 Nov 1990

4730-14-561-9120
Hose Plug

145619120
5280.12: RNCC: 3 | RNVC: 2

16 Sep 2009

4730-14-560-2895
Hydraulic System Accessories Manifold

145602895
H6543346: RNCC: 3 | RNVC: 2
CV155619: RNCC: 5 | RNVC: 2
H6543346: RNCC: 5 | RNVC: 2

8 Apr 2009

4730-14-290-8057

4730-14-262-1433

4730-14-361-0353

4730-14-558-8482
Hose Clamp

145588482
1466101: RNCC: 3 | RNVC: 2

14 Nov 2008

4730-14-509-3985

4730-14-553-2465
Fluid Passage Bolt

145532465
754-43890: RNCC: 3 | RNVC: 2

19 Mar 2007

4730-14-414-6529
Tube Tee

144146529
LL8450-08-69UK: RNCC: 3 | RNVC: 2
8450086966NU: RNCC: 5 | RNVC: 2

20 Feb 1987

4730-14-496-9894
Fluid Pressure Line Multiple Connector

144969894
NO PRIMARY REF14-496-9894: RNCC: 3 | RNVC: 2
50-5060K: RNCC: 5 | RNVC: 9
F300 0T 022 3975: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-498-3056
Tube To Boss Straight Adapter

144983056
PAA58-43-002-01: RNCC: 3 | RNVC: 2
91952492: RNCC: 3 | RNVC: 2
F300 0T 004 7683: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-541-8168
Tube To Boss Straight Adapter

145418168
1000.06.08.13: RNCC: 3 | RNVC: 2
LX1153A00: RNCC: 5 | RNVC: 2

26 Jun 2004

4730-14-554-5836
Flange To Tube Straight Adapter

145545836
9945100060: RNCC: 3 | RNVC: 2

23 Jul 2007

4730-14-458-3724
Pipe Flange

144583724
DLT087293: RNCC: 3 | RNVC: 2

21 Oct 1992

4730-14-519-2773
Lubrication Fitting

145192773
M7075265: RNCC: 3 | RNVC: 2

15 Mar 2000

4730-14-434-3053
Hydraulic Manifold Assembly

144343053
553437: RNCC: 3 | RNVC: 2

20 Sep 1989

4730-14-557-7382
Bulkhead Hose Connector

145577382
PE65001E14: RNCC: 3 | RNVC: 2

8 Jul 2008

4730-14-273-5239

4730-14-440-8993
Tube Union

144408993
F9BPB6M14X1,5C0: RNCC: 3 | RNVC: 2
F9BPB6M14X1,5PTC: RNCC: 5 | RNVC: 2
5005330080: RNCC: 5 | RNVC: 2
91632280: RNCC: 5 | RNVC: 2

7 Aug 1990

4730-14-321-8665

4730-14-556-5694
Tube Coupling

145565694
717276: RNCC: 3 | RNVC: 2

25 Mar 2008

4730-14-356-6293

4730-14-577-2926
Tube Elbow

145772926
MJ 7/16 - FJ 7/16 90DEG: RNCC: 3 | RNVC: 2
Y00014276: RNCC: 5 | RNVC: 2
4622: RNCC: 5 | RNVC: 2
V870500: RNCC: 5 | RNVC: 2

3 Sep 2013

4730-14-485-6341
Tube To Boss Straight Adapter

144856341
51306-9: RNCC: 3 | RNVC: 2
513069: RNCC: 5 | RNVC: 9

6 Feb 1997

4730-14-532-4454
Tube To Gas Fitting Straight Adapter

145324454
0RSA8X8-13DTCW12: RNCC: 3 | RNVC: 2

30 Oct 2002

4730-14-537-7619
Quick Disconnect Coupling Half

145377619
N002.482.03: RNCC: 3 | RNVC: 2

20 Nov 2003

4730-14-553-7953
Hydraulic System Accessories Manifold

145537953
R900561180: RNCC: 3 | RNVC: 2

22 May 2007

4730-14-488-2046
Tube To Boss Straight Adapter

144882046
0149 071 000: RNCC: 3 | RNVC: 2
LV035-NS0608S: RNCC: 5 | RNVC: 2

23 Apr 1997

4730-14-290-9541

4730-14-268-1024

4730-14-400-7091
Flange To Tube Straight Adapter

144007091
J05085-04-0200P028: RNCC: 3 | RNVC: 2

8 May 1985

4730-14-329-1020
Tube Coupling

143291020
34-12X17-14: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-549-2256
Self-Sealing Coupling Half

145492256
2006/02 EATSEA/BVM: RNCC: 3 | RNVC: 2

13 Mar 2006

4730-14-395-2203
Tube To Boss Straight Adapter

143952203
1464-40-02REP4: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-433-5995
Tube Tee

144335995
LV303-CP12L: RNCC: 3 | RNVC: 2
TELA12L: RNCC: 5 | RNVC: 2
91600101: RNCC: 5 | RNVC: 2

2 Aug 1989

4730-14-268-5072

4730-14-544-6266
Tube To Boss Straight Adapter

145446266
073106012008013: RNCC: 3 | RNVC: 2
0110662007: RNCC: 5 | RNVC: 2

14 Feb 2005

4730-14-555-6179
Tube Fitting Flared Sleeve

145556179
9932201200: RNCC: 3 | RNVC: 2

3 Dec 2007

4730-14-476-5399
Quick Disconnect Coupling Half

144765399
7027: RNCC: 3 | RNVC: 2
RCS06.1808: RNCC: 3 | RNVC: 2
7027: RNCC: 5 | RNVC: 2

20 Jun 1995

4730-14-524-5302
Tube To Boss Straight Adapter

145245302
23S10064: RNCC: 3 | RNVC: 2

21 Mar 2001

4730-14-526-8601
Pipeline Flexible Spacer

145268601
303282: RNCC: 3 | RNVC: 2

12 Sep 2001

4730-14-250-1132

4730-14-407-6892
Tube Coupling

144076892
MOD8538-2: RNCC: 3 | RNVC: 2

27 Feb 1986

4730-14-288-9681
Pipe Flange

142889681
D3-6: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-375-5629
Tube Coupling

143755629
280-9-29: RNCC: 3 | RNVC: 2

26 Feb 1982

4730-14-234-6220
Vis A Passage De Fl

142346220
281679: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-269-1820
Pipe Flange

142691820
7066CC1F44-5: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-505-3407
Reducteur Pour Tube

4730-14-566-6303
Pipe Flange

145666303
303-969-901-0: RNCC: 3 | RNVC: 2

1 Dec 2010

4730-14-333-5091
Raccord Flexible

143335091
GSM166-005F11: RNCC: 3 | RNVC: 2
GSM166-05F11: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-220-6065

4730-14-260-9178

4730-14-204-4036

4730-14-506-0325
Tube Coupling

145060325
RA1M504232091: RNCC: 3 | RNVC: 2

2 Apr 1998

4730-14-503-2217
Tube Coupling

145032217
RA1M522004151U1: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-506-0381
Flange To Tube Elbow

145060381
RA1M533101190: RNCC: 3 | RNVC: 2

2 Apr 1998

4730-14-478-5898
Fluid Pressure Line Multiple Connector

144785898
530308: RNCC: 3 | RNVC: 2

8 Nov 1995

4730-14-399-9474
Tube Tee

143999474
9450057058: RNCC: 3 | RNVC: 2

24 Apr 1985

4730-14-563-3293
Tube Tee

145633293
2451 710L: RNCC: 3 | RNVC: 2

26 Jan 2010

4730-14-561-6273
Swivel Retaining Pipe Flange

145616273
268139662: RNCC: 3 | RNVC: 2

10 Aug 2009

4730-14-502-4004
Quick Disconnect Coupling Half

145024004
484981: RNCC: 3 | RNVC: 2

11 Dec 1997

4730-14-490-3193
Fluid Pressure Line Multiple Connector

144903193
8816517000: RNCC: 3 | RNVC: 2

24 Sep 1997

4730-14-268-9755
Tube To Boss Straight Adapter

142689755
12471P12469: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-269-1997
Pipe Flange

142691997
7066ED1M57: RNCC: 2 | RNVC: 2
4730BH-57M: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-511-9365
Pipe Flange

145119365
2527: RNCC: 3 | RNVC: 2

28 Jan 1999

4730-14-294-0683
Quick Disconnect Coupling Half

142940683
E29572C30BZ: RNCC: 2 | RNVC: 2

1 Jan 1973

4730-14-296-9480
Tube To Boss Straight Adapter

142969480
177169: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-476-0497
Bulkhead Hose Connector

144760497
5000289662: RNCC: 3 | RNVC: 2

17 May 1995

4730-14-382-8757
Tube To Boss Straight Adapter

143828757
PE60841H14: RNCC: 3 | RNVC: 2

2 Aug 2000

4730-14-500-2506
Tube To Boss Straight Adapter

145002506
377646X91: RNCC: 3 | RNVC: 2
F300 0T 024 2562: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-365-9618
Quick Disconnect Coupling Assembly

143659618
SJA32ACD: RNCC: 3 | RNVC: 2

4 Nov 1980

4730-14-536-1869
Fluid Pressure Line Multiple Connector

145361869
61029269AA: RNCC: 3 | RNVC: 2

15 Jul 2003

4730-14-385-7070
Tube Tee

143857070
G2H: RNCC: 3 | RNVC: 2

26 Jul 1983

4730-14-278-0941

4730-14-262-1411

4730-14-557-6191
Tube Nipple

145576191
SV08LOMDCF: RNCC: 3 | RNVC: 2
A231004000161: RNCC: 5 | RNVC: 2

30 Jun 2008

4730-14-576-0386
Tube To Boss Straight Adapter

145760386
110809G: RNCC: 3 | RNVC: 2
Y00014113: RNCC: 5 | RNVC: 2

24 May 2013

4730-14-576-2649
Pipe Coupling

145762649
7022: RNCC: 3 | RNVC: 2

10 Jun 2013

4730-14-411-6100
Couvercle Graisseur

144116100
7164256: RNCC: 3 | RNVC: 9
7164256: RNCC: 5 | RNVC: 2
007164257: RNCC: 5 | RNVC: 9

27 Aug 1986

4730-14-358-8304

4730-14-562-4816
Tube Nipple

145624816
G25-PS: RNCC: 3 | RNVC: 2

29 Oct 2009

4730-14-233-8753
Bague Speciale

142338753
86065: RNCC: 3 | RNVC: 2
9567157600: RNCC: 5 | RNVC: 2
RFL86065: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-263-0091
Support De Crepine

142630091
DLT008712: RNCC: 3 | RNVC: 2
DLT008712: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-243-6098

4730-14-279-0550
Tube Tee

142790550
9150016066: RNCC: 3 | RNVC: 2
CAR7-25-20-20HP: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-555-6178
Tube Fitting Flared Sleeve

145556178
9932200800: RNCC: 3 | RNVC: 2

3 Dec 2007

4730-14-426-6071
Tube To Boss Straight Adapter

144266071
GE25SMEDA3C: RNCC: 3 | RNVC: 2
GE25SMEDA3C: RNCC: 3 | RNVC: 9
RAR1403: RNCC: 5 | RNVC: 2
GE25PSMED: RNCC: 5 | RNVC: 9

8 Sep 1988

4730-14-215-5858
Pointeau Debrayage

142155858
FKPU18X60: RNCC: 3 | RNVC: 2
9764: RNCC: 5 | RNVC: 2
0948809296: RNCC: 5 | RNVC: 2
0948809296: RNCC: 5 | RNVC: 9
948809296: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-203-6448

4730-14-359-6442
Tube To Boss Straight Adapter

143596442
PPA28: RNCC: 3 | RNVC: 2

15 Oct 1979

4730-14-537-5947
Tube To Boss Straight Adapter

145375947
5005030770: RNCC: 3 | RNVC: 2
5005030770: RNCC: 6 | RNVC: 9

12 Nov 2003

4730-14-454-5586
Quick Disconnect Coupling Half

144545586
1000-511: RNCC: 3 | RNVC: 2

7 Apr 1992

4730-14-374-9977
Fluid Passage Bolt

143749977
15534: RNCC: 3 | RNVC: 2

30 Jan 1982

4730-14-427-0415
Quick Disconnect Coupling Half

144270415
RBE19-1104ICJV: RNCC: 3 | RNVC: 2
85-693-4760: RNCC: 6 | RNVC: 9

5 Oct 1988

4730-14-329-9272
Tube Tee

143299272
NO PRIMARY REF14-329-9272: RNCC: 3 | RNVC: 2
820: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-360-0502
Tube To Boss Straight Adapter

143600502
NO PRIMARY REF14-360-0502: RNCC: 3 | RNVC: 2
685-42: RNCC: 5 | RNVC: 9

31 Oct 1979

4730-14-379-3062
Pipe Flange

143793062
E64-35-3200-122BF9-22ETF10-22DN-: RNCC: 3 | RNVC: 1

6 Sep 1982

4730-14-290-1372
Appareil Desodorisa

142901372
GSM865-001F4: RNCC: 3 | RNVC: 2
211MA005F5: RNCC: 5 | RNVC: 2
GSM865-01F4: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-464-9403
Fluid Pressure Line Multiple Connector

144649403
9970-146-301: RNCC: 3 | RNVC: 2

8 Sep 1993

4730-14-287-7494
Tube Coupling

142877494
NO PRIMARY REF14-287-7494: RNCC: 3 | RNVC: 2
D4567: RNCC: 5 | RNVC: 9
D4567: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-556-0723
Hose To Gas Fitting Straight Adapter

145560723
200014494: RNCC: 3 | RNVC: 2

28 Jan 2008

4730-14-212-1215

4730-14-326-1892

4730-14-365-1517
Ventilatio Goulotte

143651517
969628: RNCC: 3 | RNVC: 2
969628: RNCC: 5 | RNVC: 9

2 Sep 1980

4730-14-287-9728

4730-14-226-2153

4730-14-032-3085
Tube To Boss Straight Adapter

140323085
8454148066: RNCC: 3 | RNVC: 2

20 Jul 1982

4730-14-507-6608
Fluid Pressure Line Multiple Connector

145076608
704542: RNCC: 3 | RNVC: 2

11 Aug 1998

4730-14-524-0418
Tube Coupling

145240418
GFACA73: RNCC: 3 | RNVC: 2

22 Feb 2001

4730-14-485-6426
Quick Disconnect Coupling Half

144856426
45390179: RNCC: 3 | RNVC: 2
45390179: RNCC: 5 | RNVC: 2

6 Feb 1997

4730-14-405-1644
Quick Disconnect Plug

144051644
EDM0135: RNCC: 3 | RNVC: 2
91360559: RNCC: 5 | RNVC: 2

27 Nov 1985

4730-14-368-2154
Tube To Boss Straight Adapter

143682154
532717: RNCC: 3 | RNVC: 2

20 Feb 1981

4730-14-280-3409

4730-14-233-8334
Quick Disconnect Wye

142338334
750X50X40X40: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-328-2607
Pipe Flange

143282607
ZA29C8UT: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-418-1976
Fluid Pressure Line Multiple Connector

144181976
0301520430: RNCC: 3 | RNVC: 2

6 Aug 1987

4730-14-555-7740
Adapter And Flange Assembly

145557740
0292910040: RNCC: 3 | RNVC: 2

13 Dec 2007

4730-14-453-0379
Fluid Passage Bolt

144530379
15051420P: RNCC: 3 | RNVC: 2

31 Jan 1992

4730-14-272-5574

4730-14-502-8277
Raccord

145028277
9R2483: RNCC: 3 | RNVC: 2

17 Dec 1997

4730-14-506-3037
Straight Tubing Connector

145063037
38225216: RNCC: 3 | RNVC: 2
38225216: RNCC: 5 | RNVC: 9

22 Apr 1998

4730-14-345-2353
Bulkhead Hose Connector

143452353
A11A231553001U1: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-414-5982
Lubrication Fitting

144145982
L13300MPED: RNCC: 3 | RNVC: 2
L13300MPED: RNCC: 5 | RNVC: 9

11 Feb 1987

4730-14-040-5493
Raccord

140405493
NO PRIMARY REF14-040-5493: RNCC: 3 | RNVC: 2
11721: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-200-2736
Pipe Clamp Coupling

142002736
VICTAULICECEMAT6552-150: RNCC: 3 | RNVC: 2

1 Jan 1962

4730-14-439-0989
Lubricant Pressure Relief Fitting

144390989
0257150780: RNCC: 3 | RNVC: 2

25 Apr 1990

4730-14-327-6156
Tube Tee

143276156
0264202440: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-327-6157
Bulkhead Hose Connector

143276157
0264202250: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-516-3903
Tube To Boss Straight Adapter

145163903
206131: RNCC: 3 | RNVC: 2

22 Sep 1999

4730-14-541-9144
Tube To Boss Straight Adapter

145419144
8201S10 17: RNCC: 3 | RNVC: 2

2 Jul 2004

4730-14-366-7736
Fluid Pressure Line Multiple Connector

143667736
157851: RNCC: 3 | RNVC: 2

20 Nov 1980

4730-14-202-5538
Fluid Passage Bolt

142025538
50842: RNCC: 3 | RNVC: 2
VDP3050: RNCC: 5 | RNVC: 2
708999: RNCC: 5 | RNVC: 2

1 Jan 1963

4730-14-362-6884
Tube To Boss Straight Adapter

143626884
56703: RNCC: 3 | RNVC: 2

19 Mar 1980

4730-14-523-9843
Sediment Strainer Element

145239843
RM2050NC3137: RNCC: 3 | RNVC: 2

16 Feb 2001

4730-14-351-5947
Fluid Passage Bolt

143515947
VDP4545: RNCC: 3 | RNVC: 2

12 Sep 1978

4730-14-520-5415
Quick Disconnect Coupling Half

145205415
1814015: RNCC: 3 | RNVC: 2

22 May 2000

4730-14-399-1215
Fluid Pressure Line Multiple Connector

143991215
5000783673: RNCC: 3 | RNVC: 2
5000783673: RNCC: 6 | RNVC: 9

6 Mar 1985

4730-14-541-9187
Quick Disconnect Coupling Half

145419187
5010260538: RNCC: 3 | RNVC: 2

2 Jul 2004

4730-14-341-1492
Fluid Passage Bolt

143411492
12180152: RNCC: 3 | RNVC: 2
12018A: RNCC: 5 | RNVC: 9
12180152: RNCC: 5 | RNVC: 9

16 Mar 1977

4730-14-501-2387
Tube To Boss Straight Adapter

145012387
471-395: RNCC: 3 | RNVC: 2
471.395: RNCC: 3 | RNVC: 2
F300 0T 025 2792: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-458-3584
Tube To Boss Straight Adapter

144583584
LN329-017REP101: RNCC: 3 | RNVC: 2
LN329-017F18DE13,5EQ: RNCC: 5 | RNVC: 2

20 Oct 1992

4730-14-578-4664
Pressure Plug Retention Cap

145784664
9100-06-00: RNCC: 3 | RNVC: 2
Y00015370: RNCC: 5 | RNVC: 2
A05929296: RNCC: 5 | RNVC: 2

3 Dec 2013

4730-14-450-6708
Hose To Boss Straight Adapter

144506708
624110: RNCC: 3 | RNVC: 2

16 Oct 1991

4730-14-546-7292
Quick Disconnect Plug

145467292
169.227: RNCC: 3 | RNVC: 2

8 Aug 2005

4730-14-246-2509
Tube To Boss Straight Adapter

142462509
262344: RNCC: 3 | RNVC: 2
262344: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-515-3871
Tube To Boss Straight Adapter

145153871
6200275: RNCC: 3 | RNVC: 2

13 Jul 1999

4730-14-530-6302
Pipeline Flexible Spacer

145306302
6110517010: RNCC: 3 | RNVC: 2
Z00.N7511290301: RNCC: 5 | RNVC: 2

28 Jun 2002

4730-14-518-3334
Tube To Boss Straight Adapter

145183334
DPAUF000029: RNCC: 3 | RNVC: 9

2 Feb 2000

4730-14-389-4046
Tube Tee

143894046
7700544327: RNCC: 3 | RNVC: 2

20 Dec 1983

4730-14-542-7274
Tube To Boss Straight Adapter

145427274
DLT614638: RNCC: 3 | RNVC: 2

4 Aug 2004

4730-14-392-0090
Hose To Boss Straight Adapter

143920090
510057: RNCC: 3 | RNVC: 2
510057U: RNCC: 5 | RNVC: 2
510057: RNCC: 5 | RNVC: 2

21 Mar 1984

4730-14-576-0607
Flange To Tube Tee

145760607
M2821343620000: RNCC: 3 | RNVC: 2

28 May 2013

4730-14-240-6806
Bouchon Equipe Spec

142406806
502644: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-492-2793
Union

144922793
0024255400: RNCC: 3 | RNVC: 2
F300 0T 007 2944: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-418-2327
Piege Equipe

144182327
16042529: RNCC: 3 | RNVC: 2

6 Aug 1987

4730-14-542-5026
Quick Disconnect Coupling Half

145425026
LL12-K46BS-143: RNCC: 3 | RNVC: 2
LL12K46BS143: RNCC: 5 | RNVC: 2

21 Jul 2004

4730-14-556-9009
Pipe Clamp Coupling

145569009
AS22-38-12C: RNCC: 3 | RNVC: 2

21 Apr 2008

4730-14-564-6915
Tube Elbow

145646915
H102874D: RNCC: 3 | RNVC: 2
7422045205: RNCC: 5 | RNVC: 2

26 May 2010

4730-14-565-5028
Self-Sealing Coupling Assembly

145655028
704A44421040: RNCC: 1 | RNVC: 2
SAPIMSM12: RNCC: 3 | RNVC: 2

25 Aug 2010

4730-14-550-9635
Tube Union

145509635
N25F: RNCC: 3 | RNVC: 2

3 Aug 2006

4730-14-347-8193

4730-14-351-8451

4730-14-320-3680
Quick Disconnect Coupling Half

143203680
RBE6-1101-0VD: RNCC: 3 | RNVC: 2
2120B: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-362-4390
Tube To Boss Straight Adapter

143624390
NO PRIMARY REF14-362-4390: RNCC: 3 | RNVC: 2
105605-01: RNCC: 5 | RNVC: 9

19 Mar 1980

4730-14-273-5078
Tube Coupling

142735078
7062BA1RPET1-14UA9: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-452-1524
Tube To Gas Fitting Straight Adapter

144521524
A580-021: RNCC: 3 | RNVC: 2

18 Dec 1991

4730-14-484-3552
Quick Disconnect Coupling Half

144843552
WZ10037-13: RNCC: 3 | RNVC: 2
91726617: RNCC: 5 | RNVC: 2
91726617: RNCC: 5 | RNVC: 2

14 Nov 1996

4730-14-470-5613
Pipe Expansion Joint

144705613
25442817100: RNCC: 3 | RNVC: 2
215627-01: RNCC: 5 | RNVC: 2

22 Jun 1994

4730-14-350-6808
Protective Lubrication Fitting Cap

143506808
605022: RNCC: 3 | RNVC: 2
1323001-79008: RNCC: 5 | RNVC: 2

12 Jul 1978

4730-14-367-2073
Fluid Pressure Line Multiple Connector

143672073
EA1M712-022: RNCC: 3 | RNVC: 2

11 Dec 1980

4730-14-423-4638
Pipe Flange

144234638
UA50088006PN420-11D1SDN50: RNCC: 2 | RNVC: 2
4730HCPN420DN05011D1S: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-326-0872
Bulkhead Hose Connector

143260872
10-74CHREP1A6-11-12: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-429-3710
Fluid Passage Bolt

144293710
755-2185: RNCC: 3 | RNVC: 2

18 Jan 1989

4730-14-279-5591
Self-Sealing Coupling Half

142795591
9949112A: RNCC: 3 | RNVC: 2
9949112: RNCC: 5 | RNVC: 2
TAHM155S5-710-4D: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-452-6836
Tube To Hose Straight Adapter

144526836
RV6E16-3E16DEAL: RNCC: 3 | RNVC: 2
8603-656: RNCC: 5 | RNVC: 9

15 Jan 1992

4730-14-289-7927
Tube To Boss Straight Adapter

142897927
G05-525: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-340-6456
Pipe Flange

143406456
E29-282DN32: RNCC: 2 | RNVC: 2

14 Feb 1977

4730-14-276-2048
Tube Fitting Brazing Ferrule

142762048
6784-1DB80-50: RNCC: 2 | RNVC: 2
MEC11396: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-485-7956
Tube To Boss Straight Adapter

144857956
432090: RNCC: 3 | RNVC: 2
432090-001: RNCC: 5 | RNVC: 9

12 Feb 1997

4730-14-389-2380
Tube Coupling

143892380
BSC8PA106-0010: RNCC: 3 | RNVC: 2
85-692-3852: RNCC: 6 | RNVC: 9

29 Nov 1983

4730-14-427-9229
Tube Union

144279229
MAT164-0074F13: RNCC: 3 | RNVC: 2

23 Nov 1988

4730-14-276-3537
Reducteur Symetriqu

142763537
9688-02-40X20: RNCC: 3 | RNVC: 2
0688-02-40X20: RNCC: 5 | RNVC: 2
9688-02-40X20: RNCC: 5 | RNVC: 9
0688-02-40X20: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-293-9324
Tube To Boss Straight Adapter

142939324
NO PRIMARY REF14-293-9324: RNCC: 3 | RNVC: 2
8641-00-15X21: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-320-2010
Tube To Boss Straight Adapter

143202010
ECHC289J11-12REP1: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-561-7957
Bulkhead Hose Connector

145617957
82492348000: RNCC: 3 | RNVC: 2

8 Sep 2009

4730-14-262-5765
Chapeau-Ecrou Racco

142625765
01088: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-263-7898
Collier Inferieur

142637898
DLT002736: RNCC: 3 | RNVC: 2
DLT002736: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-365-9664

4730-14-269-2093

4730-14-346-6803

4730-14-476-0117
Cone

144760117
A64779: RNCC: 3 | RNVC: 2

17 May 1995

4730-14-281-1702

4730-14-203-6446

4730-14-526-4682
Tube Coupling

145264682
RA1M741214606: RNCC: 3 | RNVC: 2

1 Aug 2001

4730-14-476-0612
Hose Connector Sleeve

144760612
MA100: RNCC: 3 | RNVC: 2

17 May 1995

4730-14-337-2827

4730-14-511-0768
Non-Metallic Connecting Sleeve

145110768
A49186JB100UD: RNCC: 2 | RNVC: 2

2 Dec 1998

4730-14-530-5734
Bulkhead Hose Connector

145305734
EVS20-PS: RNCC: 3 | RNVC: 2
SYB5240: RNCC: 5 | RNVC: 2

25 Jun 2002

4730-14-379-6402

4730-14-294-3207
Fluid Pressure Line Multiple Connector

142943207
A24941-3: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-515-8377
Fluid Flow Restrictor Unit

145158377
MAT164-0132F01-R-DPP00020: RNCC: 3 | RNVC: 2

16 Aug 1999

4730-14-392-4624
Tube To Hose Straight Adapter

143924624
FBMB6-1/8: RNCC: 3 | RNVC: 2
FBMB6-1/8: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-375-5218
Tube To Boss Straight Adapter

143755218
F40XS12 3-4: RNCC: 3 | RNVC: 2
F40XS12-3-4: RNCC: 5 | RNVC: 9

26 Feb 1982

4730-14-466-4771
Tube Union

144664771
45560027: RNCC: 3 | RNVC: 9

15 Nov 1993

4730-14-208-8992
Tuyau Caoutchouc Re

142088992
AF5180-16-70-2CS6AX: RNCC: 3 | RNVC: 2
506-16SC: RNCC: 5 | RNVC: 2
AF16-70-2X: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-462-8454
Hose To Boss Straight Adapter

144628454
303293-01-01: RNCC: 3 | RNVC: 2

5 May 1993

4730-14-320-2162
Tube To Boss Straight Adapter

143202162
200114-05900: RNCC: 3 | RNVC: 2
200114: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-271-9724
Tube To Boss Straight Adapter

142719724
NO PRIMARY REF14-271-9724: RNCC: 3 | RNVC: 2
AB132MREP2: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-324-1345
Barillet Cinq Voies

143241345
GSM163-006F7AVECECR0USRACC0RD: RNCC: 3 | RNVC: 2
GSM163-06F7AVECECR0USRACC0RD: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-285-5281
Raccord Complet

142855281
NO PRIMARY REF14-285-5281: RNCC: 3 | RNVC: 2
9567150010: RNCC: 5 | RNVC: 2
87090: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-263-3777
Bride Pour Tube

142633777
R402190: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-366-5955

4730-14-512-8344
Tube Union

145128344
213046: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-263-6343

4730-14-363-5040
Tube To Boss Straight Adapter

143635040
UML24G3-4B: RNCC: 3 | RNVC: 2

9 May 1980

4730-14-362-8757
Threaded Tube Fitting Plug

143628757
045019-00233: RNCC: 3 | RNVC: 2
101270-00200: RNCC: 5 | RNVC: 2

19 Mar 1980

4730-14-374-7722
Sediment Strainer Body

143747722
365A32-6752-23: RNCC: 3 | RNVC: 2

30 Jan 1982

4730-14-247-3161
Fluid Pressure Line Multiple Connector

142473161
M3B745-005: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-373-0577
Pipe Flange

143730577
B0326-009F11: RNCC: 3 | RNVC: 2

21 Sep 1981

4730-14-478-5472
Lubrication Fitting

144785472
EN2646-03: RNCC: 2 | RNVC: 2

8 Nov 1995

4730-14-439-8249
Pipe Coupling Leak Repair Clamp

144398249
332A55-2004-21: RNCC: 3 | RNVC: 2

23 May 1990

4730-14-228-6881
Tube Fitting Clinch Sleeve

142286881
BAGUERBSCA36: RNCC: 2 | RNVC: 2
Q1-605-36: RNCC: 3 | RNVC: 2
MAT164-0367F17: RNCC: 3 | RNVC: 2
1CA36: RNCC: 3 | RNVC: 2
DK36N: RNCC: 3 | RNVC: 2
GSM164-13F17: RNCC: 5 | RNVC: 2
GSM164-013F17: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-466-4434
Quick Disconnect Coupling Half

144664434
9687-02 40X45+9683-02+9684-02: RNCC: 3 | RNVC: 2

5 Nov 1993

4730-14-213-4363
Pipe Flange

142134363
MG60-3B22: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-513-2910
Lubrication Fitting

145132910
NO PRIMARY REF14-513-2910: RNCC: 3 | RNVC: 2
NNP 4730864531787: RNCC: 5 | RNVC: 9

10 Mar 1999

4730-14-371-0254
Pipe Flange

143710254
E29-283-50-60-3Z10CNT18-11: RNCC: 2 | RNVC: 2

5 Jun 1981

4730-14-510-7362
Hose Connector Sleeve

145107362
3K55-053: RNCC: 3 | RNVC: 2

10 Nov 1998

4730-14-426-7672
Tube Tee

144267672
4730HEING042,4X5-17,2X2: RNCC: 2 | RNVC: 2

21 Sep 1988

4730-14-527-5896
Fluid Passage Bolt

145275896
NO PRIMARY REF14-527-5896: RNCC: 3 | RNVC: 2
B014X100: RNCC: 5 | RNVC: 2

30 Oct 2001

4730-14-408-7225
Quick Disconnect Coupling Half

144087225
H8-63W: RNCC: 3 | RNVC: 2

2 Apr 1986

4730-14-277-2812
Tube To Boss Straight Adapter

142772812
Q1-52-16-20X150: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-452-8983
Anchor And Reinforcement Pipe Clamp

144528983
SP213,5PA-DPAS: RNCC: 3 | RNVC: 2

27 Jan 1992

4730-14-417-7720
Tube To Boss Straight Adapter

144177720
Q15GE38S1-BSPNU: RNCC: 3 | RNVC: 2
8401383466NU: RNCC: 5 | RNVC: 2

22 Jul 1987

4730-14-458-6031
Tube To Boss Swivel Joint

144586031
1980-900-10: RNCC: 3 | RNVC: 2

29 Oct 1992

4730-14-513-2886
Tube Coupling Inverted Nut

145132886
NO PRIMARY REF14-513-2886: RNCC: 3 | RNVC: 2
NNP 4730864528273: RNCC: 5 | RNVC: 9

10 Mar 1999

4730-14-486-5589
Te Equipe

144865589
2M86092-01: RNCC: 3 | RNVC: 2

21 Mar 1997

4730-14-309-5581
Fluid Pressure Line Multiple Connector

143095581
0000367070: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-324-7791
Bulkhead Hose Connector

143247791
000MA0041F42: RNCC: 3 | RNVC: 2
000MA041F42: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-527-4040
Tube To Boss Straight Adapter

145274040
H77745: RNCC: 3 | RNVC: 2

24 Oct 2001

4730-14-367-7418

4730-14-371-3070

4730-14-378-6575

4730-14-522-0562
Tube Fitting Locknut

145220562
2MD110N53-64: RNCC: 3 | RNVC: 2

2 Oct 2000

4730-14-562-1792
Fluid Passage Bolt

145621792
3528 00 17: RNCC: 3 | RNVC: 2
FS0002450: RNCC: 6 | RNVC: 9

6 Oct 2009

4730-14-515-5942
Tube To Boss Straight Adapter

145155942
45010061A: RNCC: 3 | RNVC: 2

21 Jul 1999

Load More Results