What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 79 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 79 of 185

4730-14-226-1891

4730-14-437-9723
Lubrication Fitting

144379723
80-300905: RNCC: 3 | RNVC: 2

5 Mar 1990

4730-14-226-8783

4730-14-314-6242

4730-14-365-3487

4730-14-268-1026
Lubrication Fitting

142681026
NIPA1: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-414-5099
Tube To Boss Straight Adapter

144145099
8905101866NU: RNCC: 3 | RNVC: 2

5 Feb 1987

4730-14-421-0328
Fluid Pressure Line Multiple Connector

144210328
109051: RNCC: 3 | RNVC: 2

6 Jan 1988

4730-14-342-3515
Raccords Assembles

143423515
8811068000: RNCC: 3 | RNVC: 2

14 Apr 1977

4730-14-567-2069
Tube-Hose Adapter Body

145672069
B001640: RNCC: 3 | RNVC: 2

22 Feb 2011

4730-14-559-5538
Hose Clamp

145595538
926.140: RNCC: 3 | RNVC: 2

23 Jan 2009

4730-14-364-9698

4730-14-367-0287

4730-14-454-0395
Tube Tee

144540395
11RA12L6-16X150COSNU: RNCC: 3 | RNVC: 2
811L22532: RNCC: 5 | RNVC: 2
5005030421: RNCC: 5 | RNVC: 2

19 Mar 1992

4730-14-476-0614
Hose Connector Sleeve

144760614
MA170: RNCC: 3 | RNVC: 2

17 May 1995

4730-14-442-5014
Hose To Gas Fitting Straight Adapter

144425014
01230713: RNCC: 3 | RNVC: 2
1230713: RNCC: 5 | RNVC: 2

17 Oct 1990

4730-14-539-1185
Return Tube Bend

145391185
NGM0099086078575: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-525-2974
Quick Disconnect Coupling Half

145252974
NBA.116: RNCC: 3 | RNVC: 2
1989 111 103: RNCC: 5 | RNVC: 2

23 May 2001

4730-14-505-6881
Fluid Pressure Line Multiple Connector

145056881
A46653: RNCC: 3 | RNVC: 2

26 Mar 1998

4730-14-412-8278
Flange To Hose Elbow

144128278
536181: RNCC: 3 | RNVC: 2
8098426: RNCC: 5 | RNVC: 2

5 Nov 1986

4730-14-524-0286
Tube Tee

145240286
2424-42: RNCC: 3 | RNVC: 2

22 Feb 2001

4730-14-523-4512
Tube Coupling

145234512
19203426: RNCC: 3 | RNVC: 2

22 Jan 2001

4730-14-512-9123
Fluid-Emulsion Spray Nozzle

145129123
562346: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-549-6305
Tube Tee

145496305
PE66003E08: RNCC: 3 | RNVC: 2

24 Apr 2006

4730-14-426-8816
Pipe Flange

144268816
AGQ12: RNCC: 3 | RNVC: 2

27 Sep 1988

4730-14-538-2366
Pipe Flange

145382366
NGM0010033740561: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-569-6552
Fluid Flow Restrictor

145696552
RU7: RNCC: 3 | RNVC: 2

10 Oct 2011

4730-14-208-7600
Fluid Passage Bolt

142087600
0000361755: RNCC: 3 | RNVC: 2
361755: RNCC: 5 | RNVC: 9
0000361755: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-281-0782

4730-14-434-8402
Montage Accessoires

144348402
BEAE3121: RNCC: 3 | RNVC: 2

4 Oct 1989

4730-14-270-5651

4730-14-212-1224

4730-14-334-1985

4730-14-567-2077
Hose Mender

145672077
2401817: RNCC: 3 | RNVC: 2
B001762: RNCC: 5 | RNVC: 2

22 Feb 2011

4730-14-373-9521

4730-14-256-9334
Pipe Flange

142569334
RUHB1-40: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-539-7019
Tube To Boss Straight Adapter

145397019
4A8/12X100EQ: RNCC: 3 | RNVC: 2
4A8/12X100EQ: RNCC: 5 | RNVC: 2

2 Feb 2004

4730-14-431-9475
Pipe Flange

144319475
UA50088012-LSFN-DE25: RNCC: 3 | RNVC: 2

17 May 1989

4730-14-256-6034
Tube Tee

142566034
NG411-02-40PL3UE10Z1: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-041-2477
Bulkhead Hose Connector

140412477
N410-24: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-354-1330
Tube Tee

143541330
57-12NN: RNCC: 3 | RNVC: 2
225970: RNCC: 5 | RNVC: 2

16 Jan 1979

4730-14-423-4047
Pipe Flange

144234047
UA50088006PN20-12D2DN150: RNCC: 2 | RNVC: 2
4730HBPN20DN15012D2: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-434-9601
Fluid Flow Restrictor

144349601
421951-02: RNCC: 3 | RNVC: 2

11 Oct 1989

4730-14-454-7736
Threaded Tube Fitting Plug

144547736
BMD20-17-00: RNCC: 3 | RNVC: 2

14 Apr 1992

4730-14-381-0393
Tube To Boss Straight Adapter

143810393
LL124-CK1004S: RNCC: 3 | RNVC: 2
8359101366: RNCC: 5 | RNVC: 2

14 Dec 1982

4730-14-423-4478
Pipe Flange

144234478
UA50088006PN50-11B2SDN65: RNCC: 2 | RNVC: 2
4730HCPN50DN06511B2S: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-398-5884
Tube Tee

143985884
GSM164-055F4: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-302-5535
Tube To Boss Straight Adapter

143025535
702A30-3200-20: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-395-3101
Tube Coupling

143953101
N410-73: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-503-3618
Pipe Elbow Assembly

145033618
MAT162-0154F43: RNCC: 3 | RNVC: 2

14 Jan 1998

4730-14-454-3616
Fluid-Emulsion Spray Nozzle

144543616
18-0644: RNCC: 3 | RNVC: 2

1 Apr 1992

4730-14-441-4830
Tube To Boss Straight Adapter

144414830
12069: RNCC: 3 | RNVC: 9
MBSP1"MB1": RNCC: 5 | RNVC: 9

29 Aug 1990

4730-14-398-5923
Tube Fitting Brazing Ferrule

143985923
4730AMF2PN250DE48: RNCC: 2 | RNVC: 2
GSM164-062F10Z0NEB: RNCC: 3 | RNVC: 2
MAT164-0352F10ZONEB: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-566-6902
Tube Outlet

145666902
7420891174: RNCC: 3 | RNVC: 2
20891174: RNCC: 5 | RNVC: 2

7 Dec 2010

4730-14-431-9622
Tube Union

144319622
1121606000: RNCC: 3 | RNVC: 2
91675439: RNCC: 5 | RNVC: 2
DAH1121606000: RNCC: 5 | RNVC: 9

18 May 1989

4730-14-436-6804
Flange To Tube Elbow

144366804
DA2C781200001U1: RNCC: 3 | RNVC: 2

3 Jan 1990

4730-14-507-0536
Tube Tee

145070536
PE66771TE06: RNCC: 3 | RNVC: 2

8 Jun 1998

4730-14-457-9923
Bulkhead Hose Connector

144579923
547736: RNCC: 3 | RNVC: 2

2 Oct 1992

4730-14-221-3745

4730-14-463-5397

4730-14-464-5435
Tuyau Collier

4730-14-464-5380
Tuyau Collier

4730-14-496-5544
Raccord

4730-14-458-0836
Union Pour Tube

4730-14-460-2570

4730-14-460-2594

4730-14-480-9687
Raccord Pour Tuyau

4730-14-480-9911
Tuyau Collier

4730-14-499-2011
Tube To Boss Straight Adapter

144992011
63010224: RNCC: 3 | RNVC: 9
203024011007A: RNCC: 3 | RNVC: 9
F300 0T 019 7625: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-514-1050
Tube Coupling

145141050
N102880A: RNCC: 3 | RNVC: 2
89346518: RNCC: 5 | RNVC: 2

26 Apr 1999

4730-14-287-0558
Pipe Flange

142870558
RUAN7625M913P18D: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-500-5545
Tube To Boss Straight Adapter

145005545
E63702000003: RNCC: 3 | RNVC: 2
F300 0T 024 5729: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-503-9358
Fluid Flow Restrictor

145039358
8576.052: RNCC: 3 | RNVC: 2
8576.077: RNCC: 3 | RNVC: 2

4 Feb 1998

4730-14-335-1346
Pipeline Flexible Spacer

143351346
I131NTE25PN16: RNCC: 2 | RNVC: 2
DILNTE25PN16: RNCC: 3 | RNVC: 2
DILNTE25PN16: RNCC: 5 | RNVC: 9

3 Jun 1976

4730-14-372-5197
Tube To Gas Fitting Straight Adapter

143725197
34600002: RNCC: 3 | RNVC: 2
98555280001: RNCC: 5 | RNVC: 2

1 Sep 1981

4730-14-434-2144
Tube Coupling

144342144
X513370B: RNCC: 3 | RNVC: 2

13 Sep 1989

4730-14-512-0511
Return Tube Bend

145120511
0062032: RNCC: 3 | RNVC: 2

3 Feb 1999

4730-14-503-1760
Bulkhead Hose Connector

145031760
RA1M534304110: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-372-2857
Fluid Pressure Line Multiple Connector

143722857
4325000114: RNCC: 3 | RNVC: 2
4325000104: RNCC: 5 | RNVC: 2

1 Sep 1981

4730-14-558-6044
Tube Elbow

145586044
98300902: RNCC: 3 | RNVC: 2
5005430316: RNCC: 5 | RNVC: 2

16 Oct 2008

4730-14-516-5482
Housse Antifeu

145165482
MN-40P16NT1: RNCC: 3 | RNVC: 2
99/339/001/REVB/DN40: RNCC: 3 | RNVC: 2

4 Oct 1999

4730-14-412-3053
Hose Coupling Assembly

144123053
2606-02-12A: RNCC: 3 | RNVC: 2
2606-02-12A: RNCC: 5 | RNVC: 2

8 Oct 1986

4730-14-327-6801
Tube To Boss Straight Adapter

143276801
NO PRIMARY REF14-327-6801: RNCC: 3 | RNVC: 2
416775: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-393-1772
Tube To Boss Straight Adapter

143931772
8405-18-17: RNCC: 3 | RNVC: 2

12 Apr 1984

4730-14-506-4630
Tube To Gas Fitting Straight Adapter

145064630
SO 31111-10-1/4 PVDF: RNCC: 3 | RNVC: 2
12030202: RNCC: 5 | RNVC: 2
S031111-10-1/4PVDF: RNCC: 5 | RNVC: 2
SO31111-10-1-4PVDF: RNCC: 5 | RNVC: 2
S031111-10-1-4PVDF: RNCC: 5 | RNVC: 2
SO31111-10-1/4PVDF: RNCC: 5 | RNVC: 2

29 Apr 1998

4730-14-560-0681
Tube To Boss Straight Adapter

145600681
8501L12 75: RNCC: 3 | RNVC: 2

19 Mar 2009

4730-14-571-8278
Fluid Pressure Line Multiple Connector

145718278
07215000: RNCC: 3 | RNVC: 2
07215000: RNCC: 3 | RNVC: 2
7215000: RNCC: 5 | RNVC: 2
7215000: RNCC: 5 | RNVC: 2

15 May 2012

4730-14-304-0348
Diaphragme Special

143040348
AS34TR10BREP1: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-253-1075
Bride Speciale

142531075
202425: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-323-9222
Pipe Flange

143239222
7062TD1F1F191UE12: RNCC: 2 | RNVC: 2

1 Jan 1975

4730-14-566-0555
Pipeline Flexible Spacer

145660555
6500112: RNCC: 3 | RNVC: 2

14 Oct 2010

4730-14-434-7143
Adaptateur Bride

144347143
BN329515D2DN32AC: RNCC: 3 | RNVC: 2

2 Oct 1989

4730-14-349-0648

4730-14-367-7183

4730-14-331-5832
Mamelon Double Pour

4730-14-274-2218

4730-14-335-4335

4730-14-318-9499
Pipe Flange

143189499
0235221720: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-511-0888
Tube Fitting Brazing Ferrule

145110888
E25591PB22B16AE: RNCC: 2 | RNVC: 2

2 Dec 1998

4730-14-394-7187
Tube To Boss Straight Adapter

143947187
84010867: RNCC: 3 | RNVC: 2

28 Aug 1984

4730-14-437-7982
Tube To Boss Straight Adapter

144377982
564233: RNCC: 3 | RNVC: 2

20 Feb 1990

4730-14-392-9371
Tube To Boss Straight Adapter

143929371
0024248930: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-426-1089
Hose To Boss Straight Adapter

144261089
8814020310: RNCC: 3 | RNVC: 2

4 Aug 1988

4730-14-521-1798
Pipe-Tube Escutcheon

145211798
9136028: RNCC: 3 | RNVC: 2

12 Jul 2000

4730-14-256-6311
Sediment Strainer Element

142566311
20004100: RNCC: 3 | RNVC: 2
200302: RNCC: 5 | RNVC: 2
200302: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-362-4623
Fluid Pressure Line Multiple Connector

143624623
195RD: RNCC: 3 | RNVC: 2

19 Mar 1980

4730-14-523-0577
Valve Adapter Assembly

145230577
07976: RNCC: 3 | RNVC: 2

20 Dec 2000

4730-14-543-8402
Tube To Boss Straight Adapter

145438402
560502536: RNCC: 3 | RNVC: 2

14 Dec 2004

4730-14-432-2537
Tube Repair Plug

144322537
NCHX01H013EF5REP3TAMPON: RNCC: 3 | RNVC: 2
NCHX01H013DF5REP3TAMPON: RNCC: 5 | RNVC: 2

31 May 1989

4730-14-339-2646
Tube To Boss Straight Adapter

143392646
44531: RNCC: 3 | RNVC: 9

18 Jan 1977

4730-14-395-3762
Tube To Boss Straight Adapter

143953762
N0188F17A: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-544-6644
Pressure Plug Retention Cap

145446644
517866: RNCC: 3 | RNVC: 2

15 Feb 2005

4730-14-298-9705
Fluid Pressure Line Multiple Connector

142989705
150388: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-451-2163
Bulkhead Hose Connector

144512163
PM1A522169001: RNCC: 3 | RNVC: 2
PM1A522169001: RNCC: 5 | RNVC: 2

6 Nov 1991

4730-14-430-7176
Bulkhead Hose Connector

144307176
PM1A744100021: RNCC: 3 | RNVC: 2
PM1A744100021: RNCC: 5 | RNVC: 2

22 Mar 1989

4730-14-372-1074
Tube To Boss Straight Adapter

143721074
0000719589: RNCC: 3 | RNVC: 2
5000783670: RNCC: 3 | RNVC: 2
719589: RNCC: 5 | RNVC: 9
0000719589: RNCC: 5 | RNVC: 9
5000783670: RNCC: 5 | RNVC: 9
5000783670: RNCC: 6 | RNVC: 9

1 Sep 1981

4730-14-515-1810
Quick Disconnect Coupling Assembly Set

145151810
D103463: RNCC: 3 | RNVC: 2

12 Jul 1999

4730-14-468-6366
Quick Disconnect Coupling Assembly

144686366
520 000: RNCC: 3 | RNVC: 2
1085991L00: RNCC: 5 | RNVC: 2

14 Mar 1994

4730-14-428-2549
Pipe Fitting Assortment

144282549
XF6403716: RNCC: 3 | RNVC: 2
91578097: RNCC: 5 | RNVC: 2

8 Dec 1988

4730-14-478-0851
Pipe To Tube Straight Adapter

144780851
16M33F870MXS: RNCC: 3 | RNVC: 2
F870XS25M33: RNCC: 5 | RNVC: 2

11 Oct 1995

4730-14-300-6131
Contrebride Huile

143006131
NO PRIMARY REF14-300-6131: RNCC: 3 | RNVC: 2
265H234: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-233-3319
Raccord Soude Speci

142333319
3130S73-86-210: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-570-8625
Exhaust-Intake Pneumatic Muffler

145708625
0673 00 13: RNCC: 3 | RNVC: 2

30 Jan 2012

4730-14-235-1384

4730-14-363-0773

4730-14-275-0319

4730-14-042-9081
Raccord Support

140429081
A11A230352030: RNCC: 3 | RNVC: 2

1 Sep 1981

4730-14-296-7134

4730-14-576-7901
Quick Disconnect Coupling Half

145767901
BN324578F6: RNCC: 3 | RNVC: 2

15 Jul 2013

4730-14-575-1762
Tube Coupling Assembly

145751762
3601U20A: RNCC: 3 | RNVC: 2

18 Mar 2013

4730-14-347-1942

4730-14-346-7077
Plaque De Reduction

143467077
6784-1DH114-3-6: RNCC: 2 | RNVC: 2

12 Dec 1977

4730-14-570-4889
Tube-Hose Adapter Body

145704889
01221413: RNCC: 3 | RNVC: 2

20 Dec 2011

4730-14-290-9499

4730-14-558-5228
Self-Sealing Coupling Half

145585228
92232104: RNCC: 3 | RNVC: 2

13 Oct 2008

4730-14-266-2633
Tube To Boss Straight Adapter

142662633
25480: RNCC: 3 | RNVC: 9

1 Jan 1970

4730-14-489-5328
Tube To Boss Straight Adapter

144895328
20232534: RNCC: 3 | RNVC: 2

30 Jul 1997

4730-14-378-4957
Fluid Pressure Line Multiple Connector

143784957
108120000801: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-564-7523
Hydraulic System Accessories Manifold

145647523
36512363: RNCC: 3 | RNVC: 2

3 Jun 2010

4730-14-470-0964
Bulkhead Hose Connector

144700964
8ED879: RNCC: 3 | RNVC: 2
DAH8ED879: RNCC: 5 | RNVC: 9

1 Jun 1994

4730-14-436-8471
Hose Coupling Assembly

144368471
DA2C729002320A1: RNCC: 3 | RNVC: 2

3 Jan 1990

4730-14-540-6818
Fuel Feeder Manifold

145406818
26448805000: RNCC: 3 | RNVC: 2

17 Apr 2004

4730-14-420-6184
Fluid Passage Bolt

144206184
620645: RNCC: 3 | RNVC: 2

16 Dec 1987

4730-14-329-0422

4730-14-330-9008

4730-14-520-1339
Fluid Pressure Line Multiple Connector

145201339
5000985359: RNCC: 3 | RNVC: 2

15 May 2000

4730-14-513-6782
Tube Coupling

145136782
44188: RNCC: 3 | RNVC: 2

1 Apr 1999

4730-14-509-6761
Fluid Pressure Line Multiple Connector

145096761
RA1M592005010: RNCC: 3 | RNVC: 2

28 Oct 1998

4730-14-213-4205
Fluid Passage Bolt

142134205
403574: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-552-1113
Branched Tubing Connector

145521113
0000360610: RNCC: 3 | RNVC: 2

27 Nov 2006

4730-14-495-7373
Tube To Boss Straight Adapter

144957373
103043003016A: RNCC: 3 | RNVC: 9
F300 0T 019 7744: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-497-6800
Tube To Boss Straight Adapter

144976800
6K8214: RNCC: 3 | RNVC: 2
F300 0T 023 4847: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-500-7476
Tube To Boss Straight Adapter

145007476
E64209012001: RNCC: 3 | RNVC: 2
F300 0T 024 7673: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-512-9469
Tube To Boss Straight Adapter

145129469
94040605: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-298-9653
Fluid Pressure Line Multiple Connector

142989653
181029: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-327-6161
Tube Fitting Brazing Ferrule

143276161
0264300660: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-458-1383
Tube To Boss Straight Adapter

144581383
254371: RNCC: 3 | RNVC: 2
254371: RNCC: 5 | RNVC: 9

8 Oct 1992

4730-14-554-0353
Tube Tee

145540353
228 300: RNCC: 3 | RNVC: 2
228 300: RNCC: 3 | RNVC: 2

7 Jun 2007

4730-14-554-0321
Quick Disconnect Coupling Half

145540321
372 231: RNCC: 3 | RNVC: 2
372 231: RNCC: 3 | RNVC: 2

7 Jun 2007

4730-14-404-3727
Tube To Boss Straight Adapter

144043727
209782: RNCC: 3 | RNVC: 2

30 Oct 1985

4730-14-549-5487
Tube Tee

145495487
16580: RNCC: 3 | RNVC: 2

13 Apr 2006

4730-14-362-8787

4730-14-325-8890

4730-14-236-7002

4730-14-429-4574
Corps De Raccord

144294574
755-1018: RNCC: 3 | RNVC: 2

24 Jan 1989

4730-14-333-4352
Raccord De Drainage

143334352
006A388: RNCC: 3 | RNVC: 2
85-800-5568: RNCC: 6 | RNVC: 9

2 Jul 1975

4730-14-206-8051

4730-14-239-0877

4730-14-407-3883
Armature De Crepine

144073883
31480: RNCC: 3 | RNVC: 2

12 Feb 1986

4730-14-564-1304
Tube To Boss Straight Adapter

145641304
A430400100107: RNCC: 3 | RNVC: 2
609GB055: RNCC: 5 | RNVC: 2

9 Apr 2010

4730-14-331-3272
Separateu Prefiltre

143313272
730-98: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-237-1663

4730-14-321-5045

4730-14-266-2636

4730-14-426-7773
Tube Tee

144267773
4730HEING076,1X7,1-42,4X5: RNCC: 2 | RNVC: 2

21 Sep 1988

4730-14-489-3516
Threaded Tube Fitting Plug

144893516
853-700-953-0: RNCC: 3 | RNVC: 2

9 Jul 1997

4730-14-333-1291
Tube To Boss Straight Adapter

143331291
613-590-624-0: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-455-3671
Tube To Hose Straight Adapter

144553671
31010619: RNCC: 3 | RNVC: 2
8046332D00: RNCC: 5 | RNVC: 2
3101-06-19: RNCC: 5 | RNVC: 2
3-101-06-19: RNCC: 5 | RNVC: 2
111702/2: RNCC: 5 | RNVC: 2

21 May 1992

4730-14-441-9114
Quick Disconnect Coupling Half

144419114
1362132: RNCC: 3 | RNVC: 9

25 Sep 1990

4730-14-560-0974
Tube Coupling Assembly

145600974
16396: RNCC: 3 | RNVC: 2
171 761 37: RNCC: 5 | RNVC: 2

24 Mar 2009

4730-14-431-8368
Bulkhead Hose Connector

144318368
PM1A723115100: RNCC: 3 | RNVC: 2
PM1A723115100: RNCC: 5 | RNVC: 2

10 May 1989

4730-14-402-1679
Bulkhead Hose Connector

144021679
DA2C203500158: RNCC: 3 | RNVC: 2

26 Jun 1985

4730-14-391-7107
Tube-Hose Fitting Compression Sleeve

143917107
741PN16: RNCC: 3 | RNVC: 2
74741PN16: RNCC: 5 | RNVC: 2
741 PN 16: RNCC: 5 | RNVC: 2
741PN16: RNCC: 5 | RNVC: 2

21 Mar 1984

4730-14-473-5684
Tube Coupling

144735684
9090363: RNCC: 3 | RNVC: 2
91745875: RNCC: 5 | RNVC: 2

31 Dec 1994

4730-14-355-7072
Fluid Pressure Line Multiple Connector

143557072
A11A221278010: RNCC: 3 | RNVC: 2

19 Mar 1979

4730-14-550-1157
Fluid Pressure Line Multiple Connector

145501157
RA1M751214601A2: RNCC: 3 | RNVC: 2

1 Jun 2006

4730-14-543-8789
Tube To Hose Straight Adapter

145438789
712001-T08: RNCC: 3 | RNVC: 2

14 Dec 2004

4730-14-374-8636

4730-14-341-4264
Pipe Expansion Joint

143414264
DLT072876: RNCC: 3 | RNVC: 2

16 Mar 1977

4730-14-573-2246
Adapter And Flange Assembly

145732246
752901-01: RNCC: 3 | RNVC: 2

24 Sep 2012

4730-14-451-6023
Quick Disconnect Coupling Half

144516023
PIO06-1016: RNCC: 3 | RNVC: 2
PIO6-1016: RNCC: 5 | RNVC: 2

25 Nov 1991

4730-14-561-6616
Flexible Tube Coupling Assembly

145616616
6G6FBSPORX: RNCC: 3 | RNVC: 2
GAH6G6FBSPORX: RNCC: 5 | RNVC: 2

18 Aug 2009

4730-14-576-9250
Hose Nipple

145769250
280G050: RNCC: 3 | RNVC: 2
ART280G050: RNCC: 3 | RNVC: 2
430671D: RNCC: 5 | RNVC: 2
Y00014187: RNCC: 5 | RNVC: 2

23 Jul 2013

4730-14-365-9804

4730-14-316-9123

4730-14-334-7491

4730-14-565-6887
Tube To Hose Elbow

145656887
PE65425TE12: RNCC: 3 | RNVC: 2

15 Sep 2010

4730-14-256-2047

4730-14-202-7654

4730-14-564-5659
Pipe Flange

145645659
PCFF38SS: RNCC: 3 | RNVC: 2
A230406000016: RNCC: 5 | RNVC: 2

6 May 2010

4730-14-294-9641

4730-14-279-5617

4730-14-309-1785

4730-14-562-1546
Fluid Pressure Line Multiple Connector

145621546
3118 10 13: RNCC: 3 | RNVC: 2
FS0002429: RNCC: 6 | RNVC: 9

2 Oct 2009

4730-14-303-3461

4730-14-282-0352

4730-14-341-6579

4730-14-256-0656
Tube To Boss Straight Adapter

142560656
G12-17 3-8BGS: RNCC: 3 | RNVC: 2
UMAG17X3-8BGSN: RNCC: 3 | RNVC: 2
4AG17 3-8BGS: RNCC: 3 | RNVC: 2
MG17-6B: RNCC: 3 | RNVC: 2
3032514R1: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-323-9033
Tube To Boss Straight Adapter

143239033
UFB12-3-8BSP: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-561-0635
Tube Coupling

145610635
7421286780: RNCC: 3 | RNVC: 2

11 Jun 2009

4730-14-566-6182
Fluid Pressure Line Multiple Connector

145666182
MDS81H320: RNCC: 3 | RNVC: 2

30 Nov 2010

4730-14-402-1883
Tube Bouchon

4730-14-306-7085

4730-14-249-7606

4730-14-367-0429

4730-14-562-6036
Pipeline Flexible Spacer

145626036
R1/50/KR 320-WG/P/AV: RNCC: 3 | RNVC: 2

6 Nov 2009

4730-14-267-7868

4730-14-428-0918
Ens Bride Tape

144280918
B0311F16REP6: RNCC: 3 | RNVC: 2

30 Nov 1988

4730-14-247-3634

4730-14-344-8252

4730-14-562-1545
Fluid Pressure Line Multiple Connector

145621545
3118 06 19: RNCC: 3 | RNVC: 2
FS0002428: RNCC: 6 | RNVC: 9

2 Oct 2009

4730-14-295-9144

4730-14-346-0500
Verin Raccord

143460500
107024003007: RNCC: 3 | RNVC: 2
107024003007: RNCC: 5 | RNVC: 2

5 Nov 1977

4730-14-225-0570
Raccord Siege Clape

142250570
214582: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-260-9376

4730-14-260-9358

4730-14-261-6825

4730-14-418-8116
Raccord Bloc

144188116
DA1D721298001U1: RNCC: 3 | RNVC: 2

16 Sep 1987

4730-14-281-8213
Carter Raccord Tour

142818213
C57687: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-367-0413

4730-14-271-3401
Te Tube Equipe

142713401
5380577: RNCC: 3 | RNVC: 2
5380577: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-273-5245

4730-14-361-0134
Fourrure

143610134
NO PRIMARY REF14-361-0134: RNCC: 3 | RNVC: 2
13D12-5406-15: RNCC: 5 | RNVC: 9

19 Dec 1979

4730-14-428-6466
Tube To Boss Straight Adapter

144286466
S3335RQ: RNCC: 3 | RNVC: 2

8 Dec 1988

4730-14-558-9369
Hose Coupling

145589369
150362: RNCC: 3 | RNVC: 2

24 Nov 2008

4730-14-263-0894

4730-14-263-1097

4730-14-559-8349
Quick Disconnect Coupling Half

145598349
HA0520200: RNCC: 3 | RNVC: 2

23 Feb 2009

4730-14-203-6444

4730-14-311-5300

4730-14-365-9817

4730-14-490-5588
Quick Disconnect Coupling Half

144905588
A02450-00-0000P010: RNCC: 3 | RNVC: 2

2 Oct 1997

4730-14-315-0644
Tube To Boss Straight Adapter

143150644
SP6-00-05-36: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-500-2430
Fluid Pressure Line Multiple Connector

145002430
SWVE14SMA3C: RNCC: 3 | RNVC: 2
XSWVE14SMA3C: RNCC: 5 | RNVC: 2
F300 0T 024 2453: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-230-2757
Tube To Boss Straight Adapter

142302757
12113R: RNCC: 3 | RNVC: 2
12113R: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-561-7157
Tube Elbow

145617157
C8UNPMB16M22: RNCC: 3 | RNVC: 2
C8UNPMB16M22: RNCC: 5 | RNVC: 9

25 Aug 2009

4730-14-216-2843
Raccord Special

142162843
A72456: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-414-8669
Tube To Boss Straight Adapter

144148669
MAT563-0002F3: RNCC: 3 | RNVC: 2

16 Mar 1987

4730-14-497-9203
Bulkhead Hose Connector

144979203
GSM169-018F3REP40: RNCC: 3 | RNVC: 2

24 Oct 1997

4730-14-301-8587
Quick Disconnect Coupling Half

143018587
MR4-1804-0DIB: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-307-8465
Tubulure Speciale

143078465
B252FD2AREP16: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-221-5682

4730-14-490-5585
Tube Union

144905585
AV04080000M49E0: RNCC: 3 | RNVC: 2

2 Oct 1997

4730-14-572-3956
Air Trap

145723956
CA14: RNCC: 3 | RNVC: 2
2725114: RNCC: 5 | RNVC: 2

2 Jul 2012

4730-14-392-3948
Corps Filtre Ebauch

143923948
401MA0571EBAUCHE: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-524-6940
Sediment Strainer Element

145246940
0100115A08250: RNCC: 3 | RNVC: 9
SYB2971: RNCC: 5 | RNVC: 2

5 Apr 2001

4730-14-345-3771

4730-14-378-0137
Tube Tee

143780137
16787955: RNCC: 3 | RNVC: 2
16787955: RNCC: 5 | RNVC: 9

20 Jul 1982

4730-14-281-5062

4730-14-572-4670
Drain Extension Tube

145724670
7393000: RNCC: 3 | RNVC: 2
73930: RNCC: 5 | RNVC: 9

5 Jul 2012

4730-14-277-4415

4730-14-241-3195
Raccord Special

142413195
A61230: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-297-8983
Bloc De Derivation

142978983
411MA0162FB4: RNCC: 3 | RNVC: 2
411MA162FB4: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-563-3408
Quick Disconnect Coupling Half

145633408
9085 23 06: RNCC: 3 | RNVC: 2

28 Jan 2010

4730-14-254-5899

4730-14-243-2885

4730-14-290-3878
Tube To Boss Straight Adapter

142903878
G6710-26: RNCC: 3 | RNVC: 9
062075236: RNCC: 5 | RNVC: 9
75236: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-550-8695
Pipe Flange

145508695
FHS38/12CFX: RNCC: 3 | RNVC: 2
5010616174: RNCC: 5 | RNVC: 2

25 Jul 2006

4730-14-438-7550
Pipe Expansion Joint

144387550
NO PRIMARY REF14-438-7550: RNCC: 3 | RNVC: 2
W0900001: RNCC: 5 | RNVC: 9

4 Apr 1990

4730-14-418-6526
Pipe Flange

144186526
E29203-01B-PN16DN40BF42N: RNCC: 2 | RNVC: 2
MEC10714: RNCC: 3 | RNVC: 2
4730CJ-DN40: RNCC: 5 | RNVC: 2

9 Sep 1987

4730-14-253-3625
Corps De Filtre Spe

142533625
RK5396-20REP1: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-432-0665
Pipe Flange

144320665
BN329-517F4REP5: RNCC: 3 | RNVC: 2
BN329-517DE60,3: RNCC: 5 | RNVC: 2
BN329517-60,3: RNCC: 5 | RNVC: 2

22 May 1989

4730-14-362-1127
Assechement Crepine

143621127
GSM145-014F4ETF5: RNCC: 3 | RNVC: 2

20 Feb 1980

4730-14-500-4865
Tube Tee

145004865
TR-20-20-20: RNCC: 3 | RNVC: 2
TR20-20-20: RNCC: 3 | RNVC: 2
F300 0T 024 5035: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-269-2021
Pipe Flange

142692021
7066ED1F44-5: RNCC: 2 | RNVC: 2
4730BH-44,5F: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-446-0236
Obtura Self Support

144460236
084-18: RNCC: 3 | RNVC: 2

4 Mar 1991

4730-14-273-5079
Tube Coupling

142735079
7062BA1RPET1-20UA9: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-303-1068
Pipe Flange

143031068
U1194-38: RNCC: 2 | RNVC: 2
4730BA-38: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-250-1047

4730-14-241-5252

4730-14-569-0127
Hose Coupling

145690127
7M1018: RNCC: 3 | RNVC: 2

28 Jul 2011

4730-14-429-2213
Equipe Corps

144292213
71190201100099A: RNCC: 3 | RNVC: 2
P7866: RNCC: 5 | RNVC: 2

11 Jan 1989

4730-14-344-5099

4730-14-372-6898

4730-14-211-6448
Tuyauterie Assemble

142116448
102766: RNCC: 3 | RNVC: 2
102766: RNCC: 6 | RNVC: 9

1 Jan 1964

4730-14-563-7581
Tube To Boss Tee

145637581
EL08LOMDCF: RNCC: 3 | RNVC: 2
EL08LOMDCF: RNCC: 5 | RNVC: 2
A231004000450: RNCC: 5 | RNVC: 2
90500038: RNCC: 5 | RNVC: 2
EL08LOMDCF: RNCC: 5 | RNVC: 2

11 Mar 2010

4730-14-267-3059
Raccord Special

142673059
0000280350: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-041-2321
Bulkhead Hose Connector

140412321
N410-127DN50: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-207-6241
Pipe Flange

142076241
NO PRIMARY REF14-207-6241: RNCC: 3 | RNVC: 2
302749: RNCC: 5 | RNVC: 2
302749: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-377-4609
Fluid Passage Bolt

143774609
NO PRIMARY REF14-377-4609: RNCC: 3 | RNVC: 2
18145REPE: RNCC: 5 | RNVC: 9
RE03-0153: RNCC: 5 | RNVC: 9

17 May 1982

4730-14-328-2598
Tube Tee

143282598
ZA29C9WE: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-217-3569

4730-14-031-5498

4730-14-575-8053
Fluid Passage Bolt

145758053
8816517001: RNCC: 3 | RNVC: 2

3 May 2013

4730-14-558-6630
Anchor And Reinforcement Pipe Clamp

145586630
69650003: RNCC: 3 | RNVC: 2

23 Oct 2008

4730-14-561-7878
Tube Reducer

145617878
13810: RNCC: 3 | RNVC: 2

7 Sep 2009

4730-14-349-3157
Tube To Boss Straight Adapter

143493157
1DM12-17C0-7-65-32FILETS: RNCC: 3 | RNVC: 2
061237892: RNCC: 5 | RNVC: 9

22 May 1978

4730-14-319-8002
Fluid Pressure Line Multiple Connector

143198002
121E52-211-00-2: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-403-0377
Quick Disconnect Coupling Half

144030377
RBE06-1101IA6HP: RNCC: 3 | RNVC: 2
RBE6-1101IA6HP: RNCC: 5 | RNVC: 2
91363639: RNCC: 5 | RNVC: 2

25 Jul 1985

4730-14-404-2360
Tube To Boss Straight Adapter

144042360
102327-00200: RNCC: 3 | RNVC: 2

11 Sep 1985

4730-14-380-5595
Quick Disconnect Coupling Half

143805595
3065S5-10D: RNCC: 3 | RNVC: 2
306555-10D: RNCC: 5 | RNVC: 2
3658-10D: RNCC: 5 | RNVC: 2

29 Nov 1982

4730-14-252-7341

4730-14-269-4995

4730-14-032-0745
Tube Tee

140320745
R6SX10X10: RNCC: 3 | RNVC: 2

5 Jul 1980

4730-14-345-1296
Fluid Pressure Line Multiple Connector

143451296
1031040065: RNCC: 3 | RNVC: 2
1031040065: RNCC: 5 | RNVC: 2

5 Oct 1977

4730-14-378-6600
Tube To Boss Straight Adapter

143786600
84052028: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-378-6592
Threaded Tube Fitting Plug

143786592
8200880066: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-032-1902
Pipe Flange

140321902
20E4003REP1DN125: RNCC: 3 | RNVC: 2

8 Dec 1981

4730-14-459-5537
Bulkhead Hose Connector

144595537
90079200012: RNCC: 3 | RNVC: 2

10 Dec 1992

4730-14-562-1534
Hose Clamp

145621534
68981409: RNCC: 3 | RNVC: 2

2 Oct 2009

4730-14-273-5159

4730-14-330-1594

4730-14-375-7144

4730-14-559-3504
Lubrication Fitting

145593504
D71412-A06X1: RNCC: 3 | RNVC: 2

19 Dec 2008

4730-14-504-0628
Tube Coupling

145040628
NNP4730878750171: RNCC: 3 | RNVC: 2

5 Feb 1998

4730-14-258-8312

4730-14-203-6512
Raccord Vabco

142036512
TRA25-25-10: RNCC: 3 | RNVC: 2

1 Jan 1963

4730-14-495-6851
Hydraulic System Accessories Manifold

144956851
E20764: RNCC: 3 | RNVC: 2
F300 0T 019 6272: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-274-1904
Tube To Boss Straight Adapter

142741904
DM56: RNCC: 3 | RNVC: 2
DM56: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-434-7458
Tube Tee

144347458
554807: RNCC: 3 | RNVC: 2

3 Oct 1989

4730-14-569-3219
Hydraulic Manifold Assembly

145693219
000250390N: RNCC: 3 | RNVC: 2

5 Sep 2011

4730-14-340-1159

4730-14-355-5598

4730-14-268-5151

4730-14-349-0898
Raccord Tournant

143490898
3037941: RNCC: 3 | RNVC: 2

19 Apr 1978

4730-14-334-2537
Tube Tee

143342537
GSM163-017F35: RNCC: 3 | RNVC: 2
GSM163-17F35: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-535-5204
Pipe Flange

145355204
350A27-1525-0101: RNCC: 3 | RNVC: 2

31 May 2003

4730-14-475-5808
Fluid Passage Bolt

144755808
802290010116: RNCC: 3 | RNVC: 2
802290010116: RNCC: 5 | RNVC: 9
SDM802290010116: RNCC: 5 | RNVC: 9

19 Apr 1995

4730-14-552-5958
Tube To Gas Fitting Straight Adapter

145525958
6501MPA005A: RNCC: 3 | RNVC: 2

18 Jan 2007

4730-14-430-9010
Fluid Passage Bolt

144309010
9944101200: RNCC: 3 | RNVC: 2
89414589: RNCC: 5 | RNVC: 2

29 Mar 1989

4730-14-504-8816
Pipe Flange

145048816
4139319149: RNCC: 3 | RNVC: 2
5001822185: RNCC: 3 | RNVC: 2

9 Mar 1998

4730-14-397-5642
Tube Union

143975642
0000157111: RNCC: 3 | RNVC: 2

14 Dec 1984

4730-14-233-1746

4730-14-454-5595
Quick Disconnect Coupling Half

144545595
1000-529: RNCC: 3 | RNVC: 2

7 Apr 1992

4730-14-552-6637
Quick Disconnect Coupling Half

145526637
RBE03.1251: RNCC: 3 | RNVC: 2
RBE03.1251: RNCC: 5 | RNVC: 2

22 Jan 2007

4730-14-457-9029
Tube Coupling

144579029
20910035: RNCC: 3 | RNVC: 2
308172: RNCC: 5 | RNVC: 2

29 Sep 1992

4730-14-374-8668
Tube To Boss Straight Adapter

143748668
4110-948: RNCC: 3 | RNVC: 2

30 Jan 1982

4730-14-508-8860
Tube Coupling Inverted Nut

145088860
1100551: RNCC: 3 | RNVC: 2

5 Oct 1998

4730-14-525-1859
Hydraulic Manifold Assembly

145251859
14230470C: RNCC: 3 | RNVC: 2
06310P114003: RNCC: 3 | RNVC: 2

23 May 2001

4730-14-407-3844
Pipe Flange

144073844
23325: RNCC: 3 | RNVC: 2

12 Feb 1986

4730-14-530-8160
Tube-Hose Fitting Compression Sleeve

145308160
01242200: RNCC: 3 | RNVC: 2

8 Jul 2002

4730-14-576-1833
Flange Elbow

145761833
M2821324200100: RNCC: 3 | RNVC: 2

4 Jun 2013

4730-14-376-5238
Tube To Boss Straight Adapter

143765238
NO PRIMARY REF14-376-5238: RNCC: 3 | RNVC: 2
404210697: RNCC: 5 | RNVC: 2
404210697: RNCC: 5 | RNVC: 9

28 Apr 1982

4730-14-456-3313
Tuyauterie Equipee

144563313
DLT211609: RNCC: 3 | RNVC: 2

30 Jun 1992

4730-14-237-7627
Vis Raccord Tube

142377627
R5418: RNCC: 3 | RNVC: 2
84403-180-000-000: RNCC: 5 | RNVC: 2
726467: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-010-0522
Fluid Passage Bolt

140100522
3130S69-01-901: RNCC: 3 | RNVC: 2

1 Jan 1961

4730-14-295-3379
Tube To Boss Straight Adapter

142953379
341A72-5003-20: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-222-7291
Tube Tee

142227291
GSM1297FE3-16TABLEAU2: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-563-2675
Tube Tee

145632675
190155: RNCC: 3 | RNVC: 2

19 Jan 2010

4730-14-574-0448
Boss Bushing

145740448
0000181050: RNCC: 3 | RNVC: 2

30 Nov 2012

4730-14-408-2018
Equipe Embout

144082018
CPH8E40782: RNCC: 3 | RNVC: 2

19 Mar 1986

4730-14-373-4289
Raccord Intermediai

143734289
15172BAA: RNCC: 3 | RNVC: 2

21 Oct 1981

4730-14-299-8558
Tube To Boss Straight Adapter

142998558
4730AJUNI0NMALE0RIRBSM14X125CA10: RNCC: 2 | RNVC: 2
Q1-5204JC10-14X125: RNCC: 3 | RNVC: 2
GSM164-014F36: RNCC: 3 | RNVC: 2
ORK10X14-125N: RNCC: 3 | RNVC: 2
5CA10-14X125RJS: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-424-0630
Fluid Pressure Line Multiple Connector

144240630
NO PRIMARY REF14-424-0630: RNCC: 3 | RNVC: 2
489757: RNCC: 5 | RNVC: 9

11 May 1988

4730-14-359-6221
Pipe Flange

143596221
121273500: RNCC: 3 | RNVC: 9
121273-500: RNCC: 5 | RNVC: 9

15 Oct 1979

4730-14-505-6175
Tube Tee

145056175
EVT16-S0MDKA3C: RNCC: 3 | RNVC: 2

26 Mar 1998

4730-14-511-3447
Hydraulic System Accessories Manifold

145113447
D65718: RNCC: 3 | RNVC: 2

16 Dec 1998

4730-14-439-5503
Tube To Boss Straight Adapter

144395503
2725021MI: RNCC: 3 | RNVC: 2

14 May 1990

4730-14-437-8605
Tube Tee

144378605
39069842: RNCC: 3 | RNVC: 2

21 Feb 1990

4730-14-319-7204
Fluid Passage Bolt

143197204
0172187180: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-427-8646
Quick Disconnect Coupling Assembly

144278646
HA0503000: RNCC: 3 | RNVC: 2

17 Nov 1988

4730-14-413-6238
Tube Fitting Brazing Ferrule

144136238
15-30-3805: RNCC: 3 | RNVC: 9

6 Jan 1987

4730-14-426-1060
Hose To Gas Fitting Straight Adapter

144261060
8814020212: RNCC: 3 | RNVC: 2

4 Aug 1988

4730-14-492-1422
Fluid Pressure Line Multiple Connector

144921422
0000117595: RNCC: 3 | RNVC: 2
F300 0T 007 0596: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-512-8027
Tube Coupling

145128027
175076: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-289-7727
Self-Sealing Coupling Assembly

142897727
15066478: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-378-6515
Tube To Boss Straight Adapter

143786515
8405202866: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-520-2475
Tube Coupling

145202475
RMA33P: RNCC: 3 | RNVC: 2

17 May 2000

4730-14-418-1572
Tube Tee

144181572
40392: RNCC: 3 | RNVC: 2

6 Aug 1987

4730-14-433-3635
Tube To Boss Straight Adapter

144333635
DLT150857: RNCC: 3 | RNVC: 2

24 Jul 1989

4730-14-361-5600
Pipe Expansion Joint

143615600
02528902400: RNCC: 3 | RNVC: 2
025289024: RNCC: 5 | RNVC: 2

24 Jan 1980

4730-14-283-5163
Quick Disconnect Cap

142835163
25965A: RNCC: 3 | RNVC: 9

1 Jan 1972

4730-14-246-1385

4730-14-260-9360

4730-14-434-3424
Metalliq Croisillon

144343424
86503: RNCC: 3 | RNVC: 2

20 Sep 1989

4730-14-322-1793
Raccord Clapet

143221793
A72218: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-578-6623
Garden Hose Nozzle

145786623
PPIST00001: RNCC: 3 | RNVC: 2

17 Dec 2013

4730-14-341-4080

4730-14-566-9400
Quick Disconnect Coupling Half

145669400
HA 05032 EO: RNCC: 3 | RNVC: 2
A231004000467: RNCC: 5 | RNVC: 2

18 Jan 2011

4730-14-205-0415

4730-14-286-1883

4730-14-395-7652
Raccordement Embout

143957652
DA2C512584611A1: RNCC: 3 | RNVC: 2

30 Oct 1984

4730-14-576-2131
Pipe Coupling Leak Repair Clamp

145762131
ABS0071-08: RNCC: 1 | RNVC: 2
ABS0071-08: RNCC: 3 | RNVC: 2
ABS0071-08: RNCC: 5 | RNVC: 2

6 Jun 2013

4730-14-325-8979
Tube To Boss Straight Adapter

143258979
NO PRIMARY REF14-325-8979: RNCC: 3 | RNVC: 2
739: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-367-7887

4730-14-304-0110

4730-14-218-8256

4730-14-010-0677
Dispositifdevidange

140100677
A1469: RNCC: 3 | RNVC: 2
A1469: RNCC: 5 | RNVC: 2

1 Jan 1961

4730-14-543-8382
Tube Union

145438382
544301095: RNCC: 3 | RNVC: 2

14 Dec 2004

4730-14-223-8652

4730-14-526-1301
Tube To Gas Fitting Straight Adapter

145261301
D102863B: RNCC: 3 | RNVC: 2

4 Jul 2001

4730-14-514-8018
Tube To Hose Straight Adapter

145148018
31140613: RNCC: 3 | RNVC: 2
D114060613: RNCC: 5 | RNVC: 2

16 Jun 1999

4730-14-237-5326

4730-14-559-8581
Hose To Gas Fitting Straight Adapter

145598581
1DC27170: RNCC: 3 | RNVC: 2

25 Feb 2009

4730-14-297-2625

4730-14-430-0269
Bloc Raccordement

144300269
2277-55-604: RNCC: 3 | RNVC: 2

24 Feb 1989

4730-14-376-9284

4730-14-348-0530
Raccord Cylindre

143480530
A77355: RNCC: 3 | RNVC: 2

29 Mar 1978

4730-14-367-0442

4730-14-336-8948

Load More Results