What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 72 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 72 of 185

4730-14-367-0491

4730-14-306-9829

4730-14-433-4754
Branched Tubing Connector

144334754
008794931: RNCC: 3 | RNVC: 9

1 Aug 1989

4730-14-554-5951
Tube Fitting Insert

145545951
0000510220: RNCC: 3 | RNVC: 2

23 Jul 2007

4730-14-307-9607
Tube To Boss Straight Adapter

143079607
251302: RNCC: 3 | RNVC: 9
062251302: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-570-6920
Pipe Nipple

145706920
D459 04B: RNCC: 3 | RNVC: 2
003240: RNCC: 5 | RNVC: 2

18 Jan 2012

4730-14-301-1595

4730-14-346-5957
Bride Speciale

143465957
2-16399: RNCC: 3 | RNVC: 2

12 Dec 1977

4730-14-426-7375
Tube Tee

144267375
4730HEEG060,3X8,8: RNCC: 2 | RNVC: 2

20 Sep 1988

4730-14-269-2065

4730-14-562-3516
Hose Tee

145623516
JPT8: RNCC: 3 | RNVC: 2

16 Oct 2009

4730-14-490-3826
Tube Coupling

144903826
NO PRIMARY REF14-490-3826: RNCC: 3 | RNVC: 2
NNP5340844554228: RNCC: 5 | RNVC: 9

24 Sep 1997

4730-14-345-1928
Membrane Equipee

143451928
FB1A580-20810: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-302-9262
Lubrication Fitting

143029262
2K780020202: RNCC: 3 | RNVC: 2
70003405: RNCC: 3 | RNVC: 2
K78002020: RNCC: 3 | RNVC: 2
HT31-12: RNCC: 3 | RNVC: 2
2K780020202: RNCC: 5 | RNVC: 9
K78002020: RNCC: 5 | RNVC: 9
70003405: RNCC: 5 | RNVC: 9
HT31-12: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-471-8366
Cale De Reglage

144718366
MAT166-0095F2: RNCC: 3 | RNVC: 2

21 Sep 1994

4730-14-333-5304
Partie Mobile

143335304
GSM425-007F9REP1: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-375-2298
Sediment Strainer Element

143752298
P15-350-196X150: RNCC: 3 | RNVC: 2

26 Feb 1982

4730-14-319-0737
Fluid Pressure Line Multiple Connector

143190737
NO PRIMARY REF14-319-0737: RNCC: 3 | RNVC: 2
215292: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-389-0556
Tube To Boss Straight Adapter

143890556
TB30-45017-100: RNCC: 3 | RNVC: 2

29 Nov 1983

4730-14-032-3875
Electrical Conduit Union

140323875
1207-12-12-17: RNCC: 3 | RNVC: 2

3 Nov 1983

4730-14-331-0890
Tube Tee

143310890
TRA16-10-6: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-449-5388
Tube Union

144495388
UNION MALE G3/8A 2353L17,2: RNCC: 3 | RNVC: 2
BN329-507: RNCC: 5 | RNVC: 2

26 Aug 1991

4730-14-333-5214
Barillet A 4 Voies

143335214
GSM163-018F35: RNCC: 3 | RNVC: 2
GSM163-18F35: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-557-9068
Tube-Hose Fitting Compression Sleeve

145579068
TXS6: RNCC: 3 | RNVC: 2
TXS6: RNCC: 5 | RNVC: 9

29 Jul 2008

4730-14-574-1314
Tube Coupling Assembly

145741314
YDA.210.0446: RNCC: 3 | RNVC: 2

10 Dec 2012

4730-14-367-0430

4730-14-273-5199

4730-14-290-1699

4730-14-417-4430
Raccord Angle Droit

144174430
907: RNCC: 3 | RNVC: 2
N907: RNCC: 5 | RNVC: 2

8 Jul 1987

4730-14-326-8334

4730-14-237-2208

4730-14-344-9313

4730-14-557-4782
Soil Pipe Coupling

145574782
NO PRIMARY REF 14-557-4782: RNCC: 3 | RNVC: 2
6830: RNCC: 5 | RNVC: 2

12 Jun 2008

4730-14-236-0769
Bouchon Equipe

142360769
NO PRIMARY REF14-236-0769: RNCC: 3 | RNVC: 2
164545: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-416-5644
Element Filtrant

144165644
2992-11: RNCC: 3 | RNVC: 2

18 Jun 1987

4730-14-301-1584
Self-Sealing Coupling Assembly

143011584
15066468-714U120: RNCC: 3 | RNVC: 2
96065997: RNCC: 5 | RNVC: 2
15066468: RNCC: 5 | RNVC: 2
96065997: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-516-5487
Housse Antifeu

145165487
MN-125P16NT1: RNCC: 3 | RNVC: 2
99/339/001/REVB/DN125: RNCC: 3 | RNVC: 2

4 Oct 1999

4730-14-219-2477
Raccord Alimentatio

142192477
A10-52-250-17-0: RNCC: 3 | RNVC: 2
A10-52-250-17-0: RNCC: 5 | RNVC: 2

1 Jan 1965

4730-14-489-1815
Fluid-Emulsion Spray Nozzle

144891815
70786-4,7MM: RNCC: 3 | RNVC: 2
4400-22-A-F54-4,7MM: RNCC: 5 | RNVC: 2

2 Jul 1997

4730-14-365-3052

4730-14-572-6400
Tube-Hose Fitting Compression Sleeve

145726400
34380: RNCC: 3 | RNVC: 2
CY008400: RNCC: 5 | RNVC: 2
700 000 002 649: RNCC: 6 | RNVC: 9

19 Jul 2012

4730-14-572-9126
Tube Tee

145729126
TE00000049: RNCC: 3 | RNVC: 2

27 Aug 2012

4730-14-556-7371
Hose Tee

145567371
8130 1607: RNCC: 3 | RNVC: 2

8 Apr 2008

4730-14-259-4032
Raccord Adaptateur

142594032
R30721: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-402-8228
Pipeline Flexible Spacer

144028228
DLT600883: RNCC: 3 | RNVC: 2

19 Jul 1985

4730-14-275-0217
Fluid Passage Bolt

142750217
01164277: RNCC: 3 | RNVC: 2
11642: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-500-8268
Tube Union

145008268
WBFR6: RNCC: 3 | RNVC: 2
F300 0T 024 8470: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-495-5805
Fluid Passage Bolt

144955805
J90754-1: RNCC: 3 | RNVC: 2
F300 0T 019 5058: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-219-7401
Raccord Special A Q

142197401
DNMAMX27C40: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-504-5982
Hose To Boss Straight Adapter

145045982
09930008: RNCC: 3 | RNVC: 2

25 Feb 1998

4730-14-326-7626
Tube Coupling

143267626
411MA0309F25REPY2: RNCC: 3 | RNVC: 2
411MA309F25REPY2: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-423-9026
Fluid Pressure Line Multiple Connector

144239026
117111: RNCC: 3 | RNVC: 2

5 May 1988

4730-14-228-0661
Tube To Boss Swivel Joint

142280661
9774084032: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-503-2085
Tube Coupling

145032085
RP1A504920078: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-503-2069
Tube Coupling

145032069
RP1A504150122: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-214-5214
Tube Coupling Inverted Nut

142145214
R5425: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-457-6208
Tube To Boss Straight Adapter

144576208
PM1A752129001: RNCC: 3 | RNVC: 2
PM1A752129001: RNCC: 5 | RNVC: 2

10 Sep 1992

4730-14-506-1367
Tube Coupling Assembly

145061367
1454: RNCC: 3 | RNVC: 9

8 Apr 1998

4730-14-504-7092
Tube Tee

145047092
810133548: RNCC: 3 | RNVC: 2
5005030336: RNCC: 3 | RNVC: 2

27 Feb 1998

4730-14-549-0821
Fluid Pressure Line Multiple Connector

145490821
RA1M726200065: RNCC: 3 | RNVC: 2

2 Mar 2006

4730-14-521-4876
Quick Disconnect Coupling Half

145214876
GA0066778: RNCC: 3 | RNVC: 2

2 Aug 2000

4730-14-537-2117
Quick Disconnect Coupling Half

145372117
6KP31BS: RNCC: 3 | RNVC: 2

14 Oct 2003

4730-14-538-3255
Return Tube Bend

145383255
NGM0010035824742: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-312-9560
Quick Disconnect Coupling Assembly

143129560
ECEMAT7324A: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-506-0384
Flange To Tube Elbow

145060384
RA1M533102190N1: RNCC: 3 | RNVC: 2

2 Apr 1998

4730-14-548-2870
Hydraulic System Accessories Manifold

145482870
184163: RNCC: 3 | RNVC: 2

4 Jan 2006

4730-14-216-2133
Tube Tee

142162133
R7706: RNCC: 3 | RNVC: 2
R6X6SX6: RNCC: 5 | RNVC: 2
RA7706: RNCC: 5 | RNVC: 2

1 Jan 1965

4730-14-040-7715
Tube Tee

140407715
R7606Z4: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-505-5167
Fluid Passage Bolt

145055167
3086798: RNCC: 3 | RNVC: 2
91780838: RNCC: 5 | RNVC: 2

18 Mar 1998

4730-14-441-5977
Flange To Hose Elbow

144415977
D05427202: RNCC: 3 | RNVC: 2

5 Sep 1990

4730-14-568-1041
Tube Fitting Clinch Sleeve

145681041
ASNA3759V06: RNCC: 1 | RNVC: 2
35211V06: RNCC: 3 | RNVC: 2

9 May 2011

4730-14-562-4928
Quick Disconnect Elbow

145624928
FB384 003 08 P DDPXL-017: RNCC: 3 | RNVC: 2

29 Oct 2009

4730-14-507-3897
Fluid Passage Bolt

145073897
2-60-0331-0: RNCC: 3 | RNVC: 2
2-60-0331-0: RNCC: 5 | RNVC: 9

1 Jul 1998

4730-14-413-4713
Quick Disconnect Coupling Half

144134713
RBE06-2101/OD/IC/FB/D/KR: RNCC: 3 | RNVC: 2
RBE06-2101ODICFBDKR: RNCC: 5 | RNVC: 2
J05190-00-0000T109: RNCC: 5 | RNVC: 2

17 Dec 1986

4730-14-369-7008
Quick Disconnect Coupling Half

143697008
RBE19-6819/OD/IC/0: RNCC: 3 | RNVC: 2
RBE19-68190DIC0: RNCC: 5 | RNVC: 2

17 Apr 1981

4730-14-309-2273
Self-Sealing Coupling Half

143092273
9949611A: RNCC: 3 | RNVC: 2
TAHM155S4-727-12D: RNCC: 5 | RNVC: 2
9-94-96-11A: RNCC: 5 | RNVC: 9
9949611: RNCC: 5 | RNVC: 9
85-801-6010: RNCC: 6 | RNVC: 9

1 Jan 1974

4730-14-515-6364
Quick Disconnect Coupling Assembly

145156364
5W1604: RNCC: 3 | RNVC: 2

21 Jul 1999

4730-14-370-2333
Bulkhead Hose Connector

143702333
4207-3: RNCC: 3 | RNVC: 2

18 May 1981

4730-14-040-3861
Flexible Tube Coupling Assembly

140403861
E16.F.3: RNCC: 3 | RNVC: 2
E16F3: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-403-0333
Tube To Boss Straight Adapter

144030333
F4BXS16-3-8: RNCC: 3 | RNVC: 2

25 Jul 1985

4730-14-340-9412
Tube To Boss Straight Adapter

143409412
RT11326-6: RNCC: 3 | RNVC: 2

30 Oct 2001

4730-14-371-0517
Tube Tee

143710517
8450085766: RNCC: 3 | RNVC: 2

5 Jun 1981

4730-14-368-8156
Tube To Boss Straight Adapter

143688156
9105121766: RNCC: 3 | RNVC: 2

10 Mar 1981

4730-14-391-7125
Tube To Boss Straight Adapter

143917125
P161D06S06: RNCC: 3 | RNVC: 2
721.D.06S.06: RNCC: 3 | RNVC: 2
74721D06S06: RNCC: 5 | RNVC: 2
721 D 06S 06: RNCC: 5 | RNVC: 2
721D06S06: RNCC: 5 | RNVC: 2
74721D06S06: RNCC: 5 | RNVC: 2

21 Mar 1984

4730-14-414-6819
Threaded Tube Fitting Plug

144146819
4730HK-BSC10,2: RNCC: 2 | RNVC: 2
MEC10518: RNCC: 3 | RNVC: 2

24 Feb 1987

4730-14-391-7177
Sediment Strainer Element

143917177
2817-9: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-265-9515
Tube To Boss Straight Adapter

142659515
MF77: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-418-6380
Tube To Boss Straight Adapter

144186380
AF3RAB12-1/2: RNCC: 3 | RNVC: 2
AF3RAB12-1/2: RNCC: 3 | RNVC: 9

8 Sep 1987

4730-14-352-7865
Sediment Strainer Element

143527865
290102: RNCC: 3 | RNVC: 2
290102: RNCC: 5 | RNVC: 2

14 Nov 1978

4730-14-386-4236
Tube To Boss Straight Adapter

143864236
UML6 1-4WCD: RNCC: 3 | RNVC: 9

24 Aug 1983

4730-14-319-9909
Tube To Boss Straight Adapter

143199909
05 114 16 16+05 010 16: RNCC: 3 | RNVC: 2
412-16-16: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-458-2209
Pipe Flange

144582209
BN329-609TUBE60,3: RNCC: 3 | RNVC: 2

13 Oct 1992

4730-14-250-0657

4730-14-456-0614
Lot Adapt Nbc Lrm

144560614
008206005R: RNCC: 3 | RNVC: 2

17 Jun 1992

4730-14-367-3907
Fluid Passage Bolt

143673907
15167914: RNCC: 3 | RNVC: 2
15167914: RNCC: 5 | RNVC: 2
15167914: RNCC: 5 | RNVC: 9

11 Dec 1980

4730-14-437-9822
Hose To Boss Straight Adapter

144379822
05995005: RNCC: 3 | RNVC: 2

5 Mar 1990

4730-14-465-2622
Tube Coupling

144652622
6337: RNCC: 3 | RNVC: 9
359GCL 20-3/4: RNCC: 5 | RNVC: 9

22 Sep 1993

4730-14-442-1384
Tube To Boss Straight Adapter

144421384
040B0142: RNCC: 3 | RNVC: 2
40B0142: RNCC: 5 | RNVC: 2

3 Oct 1990

4730-14-509-2628
Tube Coupling

145092628
0000310920: RNCC: 3 | RNVC: 2

21 Oct 1998

4730-14-396-0759
Bulkhead Hose Connector

143960759
212305: RNCC: 3 | RNVC: 2

27 Nov 1984

4730-14-365-7124
Hose Coupling Assembly

143657124
009849997: RNCC: 3 | RNVC: 9

8 Oct 1980

4730-14-345-2618

4730-14-505-3334
Tube Union

145053334
F88BFR8M14: RNCC: 3 | RNVC: 2

18 Mar 1998

4730-14-382-6771
Filet Adapt Raccord

143826771
0249930550: RNCC: 3 | RNVC: 2

17 Feb 1983

4730-14-552-0634
Fluid Passage Bolt

145520634
0249730050: RNCC: 3 | RNVC: 2

22 Nov 2006

4730-14-551-7911
Tube Tee

145517911
EL12LOMDA3C: RNCC: 3 | RNVC: 2

24 Oct 2006

4730-14-513-0872
Hose-Tube Flange Lateral

145130872
800811263: RNCC: 3 | RNVC: 2

3 Mar 1999

4730-14-536-0462
Tube To Hose Straight Adapter

145360462
PE65401TE06: RNCC: 3 | RNVC: 2

9 Jul 2003

4730-14-506-4114
Tube To Boss Straight Adapter

145064114
004537507X: RNCC: 3 | RNVC: 2

24 Apr 1998

4730-14-539-4926
Tube Union

145394926
T0260002: RNCC: 3 | RNVC: 2

20 Jan 2004

4730-14-311-3643

4730-14-265-9927

4730-14-405-5851
Quick Disconnect Plug

144055851
M4Z7101918720: RNCC: 3 | RNVC: 2

4 Dec 1985

4730-14-403-3584
Tube To Boss Straight Adapter

144033584
211380: RNCC: 3 | RNVC: 2

21 Aug 1985

4730-14-536-0762
Fluid Passage Bolt

145360762
1823837C91-9: RNCC: 3 | RNVC: 2

9 Jul 2003

4730-14-471-9163
Bulkhead Hose Connector

144719163
1/2PPA6-85MM: RNCC: 3 | RNVC: 2

27 Sep 1994

4730-14-578-4609
Quick Disconnect Coupling Half

145784609
805-1/4-1/8PT: RNCC: 3 | RNVC: 2
A05929308: RNCC: 5 | RNVC: 2
Y00015361: RNCC: 5 | RNVC: 2

2 Dec 2013

4730-14-397-7513
Tube Tee

143977513
81051418: RNCC: 3 | RNVC: 2

14 Dec 1984

4730-14-343-7181
Bulkhead Hose Connector

143437181
169944: RNCC: 3 | RNVC: 2

13 Jul 1977

4730-14-393-4364
Tube Union

143934364
0288100380: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-568-9639
Tube Elbow

145689639
CFS1515: RNCC: 3 | RNVC: 2

25 Jul 2011

4730-14-264-9193
Tube Union

142649193
G1204-42-33X42: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-567-6807
Quick Disconnect Coupling Assembly

145676807
5006A-2407: RNCC: 3 | RNVC: 2

5 Apr 2011

4730-14-356-5644
Bouchon Clapet

143565644
BCM12X1-75-80A100G: RNCC: 3 | RNVC: 2

15 May 1979

4730-14-432-9375

4730-14-441-8086

4730-14-311-5822
Tube Tee

143115822
9150023366: RNCC: 3 | RNVC: 2
CAR7-14-6-14HP: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-305-9081
Pipe Flange

143059081
GSM162-011F7DE76-1: RNCC: 3 | RNVC: 2
GSM162-11F7DE76-1: RNCC: 5 | RNVC: 2
A0143-001F5DE76-1: RNCC: 5 | RNVC: 2
39679: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-424-2168
Hose To Boss Straight Adapter

144242168
ASA12-7/16-20UNF2A: RNCC: 3 | RNVC: 9
ASA12-7-16-20UNF2A: RNCC: 5 | RNVC: 2
91954244: RNCC: 5 | RNVC: 2
F300 0T 004 8227: RNCC: 6 | RNVC: 9

19 May 1988

4730-14-393-5628
Col De Cygne

143935628
MN7062RFF2/2: RNCC: 3 | RNVC: 9
MN7062RFF2-2: RNCC: 5 | RNVC: 9

7 Apr 1984

4730-14-535-5876
Pipe To Tube Straight Adapter

145355876
1108-63-5-06: RNCC: 3 | RNVC: 2

4 Jun 2003

4730-14-216-1158

4730-14-237-7611

4730-14-515-1011
Tube Raccordement

145151011
14110160F: RNCC: 3 | RNVC: 2

7 Jul 1999

4730-14-560-3404
Quick Disconnect Wye

145603404
A102010: RNCC: 3 | RNVC: 2
J7837534: RNCC: 5 | RNVC: 2
CV149986: RNCC: 5 | RNVC: 2
J7837534: RNCC: 5 | RNVC: 2

10 Apr 2009

4730-14-245-9043
Distributeur Trois

142459043
NU304: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-270-5831

4730-14-367-0441

4730-14-412-3392
Bloc Sertissage

144123392
PS22X25: RNCC: 3 | RNVC: 2

8 Oct 1986

4730-14-473-2771
Hose To Gas Fitting Straight Adapter

144732771
39182-8-8B: RNCC: 3 | RNVC: 2
39182-8-8B: RNCC: 3 | RNVC: 9

13 Dec 1994

4730-14-578-0978
Flange To Tube Elbow

145780978
0292720630: RNCC: 3 | RNVC: 2

30 Oct 2013

4730-14-229-2230
Vis A Passage De Fl

142292230
278749: RNCC: 3 | RNVC: 2
278749: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-306-7580
Bride A Zinc

143067580
000MA0782F4REP1DN20: RNCC: 3 | RNVC: 2
000MA782F4REP1DN20: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-268-6410

4730-14-561-4282
Filler Cap Adapter Assembly

145614282
CR490260: RNCC: 3 | RNVC: 2

16 Jul 2009

4730-14-575-7671
Flange To Tube Elbow

145757671
M2811342800000: RNCC: 3 | RNVC: 2

30 Apr 2013

4730-14-363-5317

4730-14-210-7886

4730-14-284-4267

4730-14-331-1608
Jeu Demi-Manchons

143311608
L25.311.06: RNCC: 3 | RNVC: 2
L25-311-06: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-567-5488
Tube Coupling Inverted Nut

145675488
C14053520: RNCC: 3 | RNVC: 2
0R/C14053520: RNCC: 5 | RNVC: 9

24 Mar 2011

4730-14-570-3588
Pipe Bushing

145703588
NO PRIMARY REF 14-570-3588: RNCC: 3 | RNVC: 2
3214075M: RNCC: 5 | RNVC: 2

9 Dec 2011

4730-14-259-5034
Tige De Tuyere

142595034
E5271-10REP3: RNCC: 3 | RNVC: 2
E5271-10PC3: RNCC: 5 | RNVC: 9

1 Jan 1969

4730-14-570-6689
Tube Reducer

145706689
MAM152.151/IC: RNCC: 3 | RNVC: 2
003705: RNCC: 5 | RNVC: 2

17 Jan 2012

4730-14-040-2257
Tube To Boss Straight Adapter

140402257
501-327-028-0: RNCC: 3 | RNVC: 2
501-327-059-0: RNCC: 3 | RNVC: 2
501-327-028-0: RNCC: 8 | RNVC: 2

1 Jan 1972

4730-14-263-0901
Passage De Cloison

142630901
PCB30: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-256-0556
Croix Vabco

142560556
CB14UA9NFEM: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-565-8813
Hose Coupling

145658813
0R/C28104185: RNCC: 3 | RNVC: 2

30 Sep 2010

4730-14-351-7697
Tube Tee

143517697
311MA0038F6: RNCC: 3 | RNVC: 2
311MA038F6: RNCC: 5 | RNVC: 2

12 Sep 1978

4730-14-263-4121
Pipe Flange

142634121
R403014: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-470-5200
Bulkhead Hose Connector

144705200
514 000-NIB-S: RNCC: 3 | RNVC: 2
1067274G01: RNCC: 5 | RNVC: 2
1085996R00: RNCC: 5 | RNVC: 2

22 Jun 1994

4730-14-308-0954
Raccord Circuit Car

143080954
BD50V82-1: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-248-1466

4730-14-576-3430
Hose Clamp

145763430
138521: RNCC: 3 | RNVC: 2

13 Jun 2013

4730-14-346-4442
Pipe Flange

143464442
BN314506: RNCC: 3 | RNVC: 2

12 Dec 1977

4730-14-327-6203
Tube Tee

143276203
0264751770: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-543-8080
Tube To Boss Straight Adapter

145438080
560502101: RNCC: 3 | RNVC: 2

11 Dec 2004

4730-14-360-7952
Quick Disconnect Coupling Half

143607952
01770310: RNCC: 3 | RNVC: 2
1770310: RNCC: 5 | RNVC: 2

19 Dec 1979

4730-14-525-6313
Return Tube Bend

145256313
20 236 913 5100: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-318-5419
Tube To Boss Straight Adapter

143185419
1010020: RNCC: 3 | RNVC: 9

1 Jan 1975

4730-14-338-2520
Bronze Tube Coude

143382520
CSN060: RNCC: 3 | RNVC: 2

6 Nov 1976

4730-14-445-5775
Protecteur

144455775
R10698201: RNCC: 3 | RNVC: 2
R10698200: RNCC: 5 | RNVC: 2

18 Feb 1991

4730-14-301-5329

4730-14-203-6467
Manchette

142036467
PCA14: RNCC: 3 | RNVC: 2

1 Jan 1963

4730-14-423-8664
Diffuseur

144238664
4152-41-03: RNCC: 3 | RNVC: 2
4152-41-03: RNCC: 5 | RNVC: 9

4 May 1988

4730-14-561-7356
Hose Clamp

145617356
NO PRIMARY REF 14-561-7356: RNCC: 3 | RNVC: 2
PRI241000017: RNCC: 5 | RNVC: 2

31 Aug 2009

4730-14-414-5147
Tape De Pont

144145147
BN324574AF5REPA-DN80: RNCC: 2 | RNVC: 2

6 Feb 1987

4730-14-225-5614
Raccord De Fixation

142255614
GSM1727DET2: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-553-6009
Tube Fitting Brazing Ferrule

145536009
130 010 010: RNCC: 3 | RNVC: 2
CAB-A: RNCC: 3 | RNVC: 2

23 Apr 2007

4730-14-213-4815

4730-14-328-3902

4730-14-222-5060

4730-14-281-2860
Raccord Tournant

142812860
A24947: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-367-7205

4730-14-558-6403

4730-14-426-7685
Tube Tee

144267685
4730HEING042,4X5-33,7X4,5: RNCC: 2 | RNVC: 2

21 Sep 1988

4730-14-298-2642
Rapid Action Coupled Pipe Cap

142982642
38035: RNCC: 3 | RNVC: 9

1 Jan 1973

4730-14-352-8282
Tube Tee

143528282
R6X10X6: RNCC: 3 | RNVC: 2

14 Nov 1978

4730-14-393-5414
Tube Tee

143935414
R4X12LX12L: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-538-8645
Lubrication Fitting

145388645
NGM0021040403821: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-554-2645
Tube-Hose Adapter Body

145542645
TM2149G001: RNCC: 3 | RNVC: 2

15 Jun 2007

4730-14-401-0216
Quick Disconnect Coupling Half

144010216
8815393000: RNCC: 3 | RNVC: 2

21 May 1985

4730-14-525-7932
Tube To Boss Straight Adapter

145257932
F145365: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-393-9144
Self-Sealing Coupling Half

143939144
434G02: RNCC: 3 | RNVC: 2

23 Jun 1984

4730-14-313-7094
Pipe Flange

143137094
0210050030: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-309-5872
Fuel Feeder Manifold

143095872
0236997350: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-545-9599
Quick Disconnect Coupling Half

145459599
1122.517: RNCC: 3 | RNVC: 2

30 May 2005

4730-14-407-3782
Tube Coupling

144073782
20463: RNCC: 3 | RNVC: 2

12 Feb 1986

4730-14-321-6707
Bulkhead Hose Connector

143216707
0235480330: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-469-0583
Fluid Flow Restrictor

144690583
930241012: RNCC: 3 | RNVC: 2
91676533: RNCC: 5 | RNVC: 2

6 Apr 1994

4730-14-254-9158
Fluid Passage Bolt

142549158
TID14683: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-230-5973
Tube Coupling

142305973
3751P32A: RNCC: 3 | RNVC: 2
3751P32A: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-271-3399
Tube Tee

142713399
5380575: RNCC: 3 | RNVC: 2
5380575: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-502-6414
Lubrication Fitting

145026414
009960: RNCC: 3 | RNVC: 2

17 Dec 1997

4730-14-288-3955
Fluid Pressure Line Multiple Connector

142883955
0000301870: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-282-2426
Tube To Boss Straight Adapter

142822426
RA10606: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-318-0530
Fluid Passage Bolt

143180530
9777060001: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-438-4928
Sediment Strainer Element

144384928
31757086: RNCC: 3 | RNVC: 9

21 Mar 1990

4730-14-545-4156
Tube Tee

145454156
BELVDKO12SZB: RNCC: 3 | RNVC: 2

12 Apr 2005

4730-14-397-1516
Manchette Flexible

143971516
366A58-1149-20: RNCC: 3 | RNVC: 2

1 Dec 1984

4730-14-231-7012
Bride Speciale

142317012
9208799000: RNCC: 3 | RNVC: 2
9-208799-000: RNCC: 5 | RNVC: 2
208-799: RNCC: 5 | RNVC: 2
85-548-8280: RNCC: 6 | RNVC: 9

1 Jan 1967

4730-14-412-4101
Hose To Boss Straight Adapter

144124101
P4-1DM14 1-4BGS: RNCC: 3 | RNVC: 2
PLC3595: RNCC: 5 | RNVC: 2

15 Oct 1986

4730-14-320-0901
Fluid Passage Bolt

143200901
501-456-007-0: RNCC: 3 | RNVC: 2
85-611-1050: RNCC: 6 | RNVC: 9

1 Jan 1975

4730-14-504-9112
Pipeline Flexible Spacer

145049112
ERV125-PN10ROUGE: RNCC: 3 | RNVC: 2
DILATOFLEX-K-CC-DN125PN16: RNCC: 3 | RNVC: 2
GR1/125/KR320-WG/E/PN16: RNCC: 3 | RNVC: 2
ERV-DOUBLEROUGE-DN125PN16: RNCC: 3 | RNVC: 9
SYQ3941: RNCC: 5 | RNVC: 2

11 Mar 1998

4730-14-474-0096
Tube Union

144740096
FLEX1L133PN14EPDM/INOX: RNCC: 3 | RNVC: 2
STRAUB-FLEX1L133EPDM/INOX: RNCC: 5 | RNVC: 2
190 1331: RNCC: 5 | RNVC: 9

23 Jan 1995

4730-14-412-9894
Embout De Raccordem

144129894
447669: RNCC: 3 | RNVC: 2

5 Nov 1986

4730-14-376-3012
Tube To Boss Straight Adapter

143763012
1DM18-22X150: RNCC: 3 | RNVC: 2

30 Mar 1982

4730-14-417-3611
Tube To Boss Straight Adapter

144173611
4730AB4.3DN8EQUPE: RNCC: 2 | RNVC: 2
89010813: RNCC: 3 | RNVC: 2

6 Jul 1987

4730-14-454-1621
Pipe Flange

144541621
44161: RNCC: 3 | RNVC: 2

24 Mar 1992

4730-14-433-4967
Fluid Pressure Line Multiple Connector

144334967
D7N06GS: RNCC: 3 | RNVC: 2
9560151480: RNCC: 5 | RNVC: 2

2 Aug 1989

4730-14-520-5711
Check Valve Adapter

145205711
305711: RNCC: 3 | RNVC: 9

23 May 2000

4730-14-389-9951
Threaded Tube Fitting Plug

143899951
0000157161: RNCC: 3 | RNVC: 2

26 Jan 1984

4730-14-467-7826
Pipeline Flexible Spacer

144677826
291DN40: RNCC: 3 | RNVC: 2
291DN40: RNCC: 5 | RNVC: 2
ART291DN40: RNCC: 5 | RNVC: 2

27 Jan 1994

4730-14-404-5736
Hose To Boss Straight Adapter

144045736
33552417: RNCC: 3 | RNVC: 2

20 Nov 1985

4730-14-381-8996
Tube To Boss Straight Adapter

143818996
A81361: RNCC: 3 | RNVC: 2

25 Jan 1983

4730-14-333-6753
Tube To Boss Straight Adapter

143336753
0000147586: RNCC: 3 | RNVC: 2
0000147586: RNCC: 5 | RNVC: 9
147586: RNCC: 5 | RNVC: 9

23 Apr 1976

4730-14-417-7710
Tube To Boss Straight Adapter

144177710
01141017: RNCC: 3 | RNVC: 2

22 Jul 1987

4730-14-509-6955
Tube-Hose Fitting Compression Sleeve

145096955
741VN14: RNCC: 3 | RNVC: 2
741.VN.14: RNCC: 3 | RNVC: 2
162045: RNCC: 5 | RNVC: 2
741 VN 14: RNCC: 5 | RNVC: 2
741VN14: RNCC: 5 | RNVC: 2

28 Oct 1998

4730-14-261-6778
Swivel Flange To Hose Connector

142616778
17182: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-403-8767
Rapid Action Coupled Pipe Cap

144038767
HA0514200: RNCC: 3 | RNVC: 2

28 Aug 1985

4730-14-281-0075
Tube-Hose Fitting Compression Sleeve

142810075
E29601F14A: RNCC: 2 | RNVC: 2
13525300N: RNCC: 3 | RNVC: 2
52530: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-411-4122
Fluid Passage Bolt

144114122
CG2070699622A1: RNCC: 3 | RNVC: 2

6 Aug 1986

4730-14-329-3432
Diffuseur Hydrogene

143293432
321C0-0208: RNCC: 3 | RNVC: 2
321C0-208: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-420-0079
Echangeur Purgeur

144200079
1136101A0: RNCC: 3 | RNVC: 9
B2-ABL414DN40-PN25: RNCC: 5 | RNVC: 9

16 Nov 1987

4730-14-514-6687
Quick Disconnect Coupling Half

145146687
RBE06.2101/IC/4,5/DKV/JN/OD: RNCC: 3 | RNVC: 2
SIFLSZOB001MOF4MX: RNCC: 5 | RNVC: 2

8 Jun 1999

4730-14-321-5865

4730-14-203-6456

4730-14-564-5749
Tube Elbow

145645749
W15LCFX: RNCC: 3 | RNVC: 2
A231004000029: RNCC: 5 | RNVC: 2

7 May 2010

4730-14-565-9152
Filler Cap Adapter Assembly

145659152
9520011620: RNCC: 1 | RNVC: 2
R1038: RNCC: 3 | RNVC: 2
R1038: RNCC: 3 | RNVC: 9

4 Oct 2010

4730-14-283-5522
Raccord

142835522
129-70: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-284-2086

4730-14-268-6889
Sediment Strainer Element

142686889
1604: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-494-5468
Tube To Boss Straight Adapter

144945468
641 740 12: RNCC: 3 | RNVC: 2
F300 0T 017 4645: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-508-9041
Tube Union

145089041
K102859A: RNCC: 3 | RNVC: 2

7 Oct 1998

4730-14-333-5181
Barillet A 6 Voies

143335181
GSM163-007BF38: RNCC: 3 | RNVC: 2
GSM163-07BF38: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-248-1457

4730-14-296-6843

4730-14-575-7723
Flange Elbow

145757723
M2811343620000: RNCC: 3 | RNVC: 2

30 Apr 2013

4730-14-253-7889
Tube Preforme De 25

142537889
B078CBDBRANGEE10: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-374-7781
Tube Tee

143747781
0264300210: RNCC: 3 | RNVC: 2

30 Jan 1982

4730-14-468-9443
Tube Tee

144689443
51.40.201.74: RNCC: 3 | RNVC: 2

30 Mar 1994

4730-14-355-5337
Tube Coupling Assembly

143555337
3951SB25X32X32A: RNCC: 3 | RNVC: 2
3951SB25X32X32A: RNCC: 5 | RNVC: 9

19 Mar 1979

4730-14-355-7726
Fluid Pressure Line Multiple Connector

143557726
409099: RNCC: 3 | RNVC: 2

19 Mar 1979

4730-14-314-5057
Sediment Strainer Element

143145057
B256069: RNCC: 3 | RNVC: 2
0853540000: RNCC: 5 | RNVC: 2
256069: RNCC: 5 | RNVC: 9
0853540000: RNCC: 5 | RNVC: 9
DBAB256069: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-243-6642
Support Inferieur

142436642
270678: RNCC: 3 | RNVC: 2
270678: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-561-6208
Hose To Gas Fitting Straight Adapter

145616208
0133622139: RNCC: 3 | RNVC: 2
36422: RNCC: 5 | RNVC: 2

7 Aug 2009

4730-14-338-8892
Embout De Raccord

143388892
S1838: RNCC: 3 | RNVC: 2

17 Dec 1976

4730-14-478-8220
Fluid-Emulsion Spray Nozzle

144788220
35784: RNCC: 3 | RNVC: 2

22 Nov 1995

4730-14-313-7551
Tube Coupling

143137551
0064870590: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-388-2071
Tube To Boss Straight Adapter

143882071
T8002MK4F30B: RNCC: 3 | RNVC: 2

12 Oct 1983

4730-14-281-8091
Pipe Flange

142818091
C57291: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-449-8731
Quick Disconnect Coupling Half

144498731
KU4128SEB00437: RNCC: 3 | RNVC: 2
KU4128SEB00437: RNCC: 3 | RNVC: 2
5000792469: RNCC: 5 | RNVC: 2
DAHKU4128SEB00437: RNCC: 5 | RNVC: 9
5000792469: RNCC: 6 | RNVC: 9

11 Sep 1991

4730-14-274-6588
Tube-Hose Fitting Compression Sleeve

142746588
7062BA1BT1-8UE10R1: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-314-3641
Tube To Boss Straight Adapter

143143641
L328381: RNCC: 3 | RNVC: 2
328381: RNCC: 5 | RNVC: 2
B295623: RNCC: 5 | RNVC: 2
0023532859: RNCC: 5 | RNVC: 2
DBAL328381: RNCC: 5 | RNVC: 9
295623: RNCC: 5 | RNVC: 9
L328381: RNCC: 5 | RNVC: 9
0023532859: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-428-1328
Tube To Boss Straight Adapter

144281328
PE40301K12: RNCC: 3 | RNVC: 2

1 Dec 1988

4730-14-575-3250
Branched Tubing Connector

145753250
0301520030: RNCC: 3 | RNVC: 2

27 Mar 2013

4730-14-321-6049

4730-14-348-4704

4730-14-321-6342
Tube To Boss Straight Adapter

143216342
702A30-0715-20: RNCC: 3 | RNVC: 2

7 Mar 1996

4730-14-271-9665
Raccord

142719665
X553104: RNCC: 3 | RNVC: 2
X553-104: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-571-0117
Hose Clamp

145710117
NO PRIMARY REF 14-571-0117: RNCC: 3 | RNVC: 2
6930132: RNCC: 5 | RNVC: 2

10 Feb 2012

4730-14-560-0195
Hose Mender

145600195
POK-5AA.F: RNCC: 3 | RNVC: 2
POK-5AA.F: RNCC: 5 | RNVC: 2

16 Mar 2009

4730-14-372-5108
Embout Raccord

143725108
MAT110-03-00-2: RNCC: 3 | RNVC: 2

1 Sep 1981

4730-14-273-5430
Raccord Femelle

142735430
0799-0211: RNCC: 3 | RNVC: 2
NFEN560: RNCC: 5 | RNVC: 2
SAF0799-0211: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-412-6200
Quick Disconnect Coupling Half

144126200
SH2-63: RNCC: 3 | RNVC: 2
SH2-63: RNCC: 3 | RNVC: 2

15 Oct 1986

4730-14-326-6512

4730-14-328-7885

4730-14-562-6027
Pipeline Flexible Spacer

145626027
R1/32/KR 320-WG/P/AV: RNCC: 3 | RNVC: 2

6 Nov 2009

4730-14-509-5408

4730-14-529-2435

4730-14-424-0397
Tube Coupling

144240397
063U05-230000-1700: RNCC: 3 | RNVC: 2
063U05-230000-17: RNCC: 5 | RNVC: 2

10 May 1988

4730-14-334-2553
Tube Tee

143342553
GSM163-017F56: RNCC: 3 | RNVC: 2
GSM163-17F56: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-521-0281
Lanterne De Purgeur

145210281
OA/C12006750: RNCC: 3 | RNVC: 2

30 Jun 2000

4730-14-412-0036
Quick Disconnect Coupling Half

144120036
RBE03-7100-0D3DKRHP: RNCC: 3 | RNVC: 2
RBE3-7100-0D3DKRHP: RNCC: 5 | RNVC: 2
91463278: RNCC: 5 | RNVC: 2

24 Sep 1986

4730-14-222-7282
Tube Tee

142227282
GSM1297FE3-12TABLEAU1: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-575-3319
Tube Cap

145753319
D030 04B: RNCC: 3 | RNVC: 2

27 Mar 2013

4730-14-271-5241
Raccord Equipe

142715241
R306Z18TF: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-227-7241
Cadre Croisillonne

142277241
SIF601RR00110A: RNCC: 3 | RNVC: 2
B0044MF1BREP8: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-268-9819

4730-14-261-7864

4730-14-290-1715

4730-14-569-0602
Pipe Expansion Joint

145690602
X0150047: RNCC: 3 | RNVC: 2

2 Aug 2011

4730-14-568-1573
Packing Nut

145681573
82582375000: RNCC: 3 | RNVC: 2

11 May 2011

4730-14-311-5841

4730-14-367-7755

4730-14-317-4805
Tube Union

143174805
L4730-01F2-3-14: RNCC: 2 | RNVC: 2
4730AE-VIS30: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-393-9164
Demi-Ra Embout Male

143939164
434-33: RNCC: 3 | RNVC: 2

23 Jun 1984

4730-14-556-9916
Hose Coupling

145569916
NO PRIMARY REF 14-556-9916: RNCC: 3 | RNVC: 2
9574: RNCC: 5 | RNVC: 2

25 Apr 2008

4730-14-351-8601
Equipe Raccord

143518601
7-016-938: RNCC: 3 | RNVC: 2

16 Oct 1978

4730-14-508-2471
Tube Tee

145082471
11A16L/22X150CO: RNCC: 3 | RNVC: 2
111105310: RNCC: 5 | RNVC: 2
5005130238: RNCC: 5 | RNVC: 2

2 Sep 1998

4730-14-288-5966
Pipe Flange

142885966
RK5831DN30REP3: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-425-9035
Fluid Pressure Line Multiple Connector

144259035
BAZ5041: RNCC: 3 | RNVC: 2

28 Jul 1988

4730-14-498-7034
Tube Tee

144987034
81407300: RNCC: 3 | RNVC: 2
5005030557: RNCC: 3 | RNVC: 2
141104310: RNCC: 3 | RNVC: 9
41A16L22X150FNU: RNCC: 5 | RNVC: 9
F300 0T 008 0445: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-413-8101
Purgeur Air Comprim

144138101
211BVSW: RNCC: 3 | RNVC: 9

20 Jan 1987

4730-14-249-2016
Raccord Special

142492016
ST406M53P118: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-444-0318
Tube Union

144440318
PZCA188: RNCC: 3 | RNVC: 2

18 Dec 1990

4730-14-275-8293
Embout Raccord

142758293
4820: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-300-8560
Sediment Strainer Element

143008560
50-85: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-388-7049
Fluid Passage Bolt

143887049
26056006000: RNCC: 3 | RNVC: 2
260560060: RNCC: 5 | RNVC: 2

3 Nov 1983

4730-14-338-3900
Pipe Flange

143383900
I131E50BRIDE: RNCC: 2 | RNVC: 2

6 Nov 1976

4730-14-361-4698
Fluid Passage Bolt

143614698
315216: RNCC: 3 | RNVC: 2
315216: RNCC: 5 | RNVC: 2
315216: RNCC: 5 | RNVC: 2
315216: RNCC: 5 | RNVC: 9

24 Jan 1980

4730-14-472-0043
Tube Coupling Inverted Nut

144720043
98641000103: RNCC: 3 | RNVC: 2
41000865: RNCC: 5 | RNVC: 2

28 Sep 1994

4730-14-548-1016
Tube Fitting Clinch Sleeve

145481016
62169C06: RNCC: 3 | RNVC: 2

10 Dec 2005

4730-14-515-6233
Tube To Boss Straight Adapter

145156233
50560: RNCC: 3 | RNVC: 2

21 Jul 1999

4730-14-507-6136
Quick Disconnect Coupling Half

145076136
44616: RNCC: 3 | RNVC: 9

29 Jul 1998

4730-14-321-6344
Tube To Boss Straight Adapter

143216344
702A30-0717-20: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-294-1088
Raccord Equipe

142941088
J01377-09: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-389-7943
Pipe Flange

143897943
MN6363-1F4-5DN250: RNCC: 2 | RNVC: 2

20 Dec 1983

4730-14-453-8843
Tube Tee

144538843
R1008Z05: RNCC: 3 | RNVC: 2
924557: RNCC: 5 | RNVC: 2
89472360: RNCC: 5 | RNVC: 2

12 Mar 1992

4730-14-209-6645
Fluid Passage Bolt

142096645
058267: RNCC: 3 | RNVC: 2
M058267: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-453-5625
Hose To Boss Straight Adapter

144535625
624390: RNCC: 3 | RNVC: 2

26 Feb 1992

4730-14-555-3451
Pressure Plug Retention Cap

145553451
718768: RNCC: 3 | RNVC: 2

29 Oct 2007

4730-14-314-1230
Tube To Boss Straight Adapter

143141230
30039: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-311-8491
Pipe Flange

143118491
0064580460: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-477-2294
Fluid Flow Restrictor

144772294
221001: RNCC: 3 | RNVC: 2

2 Aug 1995

4730-14-436-7065
Bulkhead Hose Connector

144367065
DA2C203520711A1: RNCC: 3 | RNVC: 2

3 Jan 1990

4730-14-507-8649
Sediment Strainer Element

145078649
01000115A08300: RNCC: 3 | RNVC: 9

20 Aug 1998

4730-14-494-1238
Tube To Boss Straight Adapter

144941238
022375-31Z: RNCC: 3 | RNVC: 2
F300 0T 015 5860: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-506-2993
Tube-Hose Fitting Compression Sleeve

145062993
TXSS16: RNCC: 3 | RNVC: 2
TXSS16: RNCC: 3 | RNVC: 9
91720312: RNCC: 5 | RNVC: 2
77091904: RNCC: 5 | RNVC: 2

22 Apr 1998

4730-14-226-3193
Quick Disconnect Coupling Half

142263193
E29-573-21X27FEMELLELAIT0N: RNCC: 2 | RNVC: 2

1 Jan 1966

4730-14-497-0272
Fluid Pressure Line Multiple Connector

144970272
50-4858: RNCC: 3 | RNVC: 2
F300 0T 022 5740: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-393-6943
Pipe Expansion Joint

143936943
NO PRIMARY REF14-393-6943: RNCC: 3 | RNVC: 2
M17489-2: RNCC: 5 | RNVC: 9

7 Jun 1984

4730-14-497-8891
Sediment Strainer Element

144978891
FILTRE:C-304L-DN50LG110-500MICR: RNCC: 3 | RNVC: 2

22 Oct 1997

4730-14-393-1476
Tube To Boss Straight Adapter

143931476
BP2-6-1-4BGS: RNCC: 3 | RNVC: 2

12 Apr 1984

4730-14-561-7363
Tube Coupling

145617363
SMK15-M14X1,5-VC: RNCC: 3 | RNVC: 2
SMK15-M14X1,5-VC: RNCC: 5 | RNVC: 2

31 Aug 2009

4730-14-386-5484
Tube To Boss Straight Adapter

143865484
801369: RNCC: 3 | RNVC: 2
25-801369-0: RNCC: 5 | RNVC: 2

24 Aug 1983

4730-14-309-7718
Tube Tee

143097718
502-507-338-0: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-563-7556
Tube To Boss Straight Adapter

145637556
20F50MXS: RNCC: 3 | RNVC: 2

11 Mar 2010

4730-14-222-5058

4730-14-219-2832

4730-14-545-6051
Fluid Pressure Line Multiple Connector

145456051
10623736: RNCC: 3 | RNVC: 2

25 Apr 2005

4730-14-509-6552
Tube To Boss Straight Adapter

145096552
RA1B726200046Z1: RNCC: 3 | RNVC: 2

28 Oct 1998

4730-14-274-2454

4730-14-254-2774

4730-14-300-4412

4730-14-499-9067
Union Simple

144999067
UMA30-33X200NU: RNCC: 3 | RNVC: 2
F300 0T 023 9008: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-554-1961
Tube To Boss Straight Adapter

145541961
356 032: RNCC: 3 | RNVC: 2
356 032: RNCC: 3 | RNVC: 2

13 Jun 2007

4730-14-325-6775
Fluid Pressure Line Multiple Connector

143256775
0000364310: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-387-5672
Pipe Flange

143875672
STAC1350: RNCC: 3 | RNVC: 2

15 Sep 1983

4730-14-376-3552
Pipe Flange

143763552
065-30-9013PL2DN175: RNCC: 3 | RNVC: 2

30 Mar 1982

4730-14-382-8731
Tube To Boss Straight Adapter

143828731
PE60844H06: RNCC: 3 | RNVC: 2

26 Jul 2000

4730-14-273-6041
Fluid Pressure Line Multiple Connector

142736041
9694: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-202-5276
Tube Tee

142025276
R120812: RNCC: 3 | RNVC: 2
R12X8X12: RNCC: 5 | RNVC: 2
R14089: RNCC: 5 | RNVC: 2

1 Jan 1963

4730-14-396-9684
Pipe Flange

143969684
E29282PN10DN80: RNCC: 2 | RNVC: 2

27 Nov 1984

4730-14-229-2170
Raccord Droit Speci

142292170
271723: RNCC: 3 | RNVC: 2
271723: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-471-1621
Pipe To Gas Fitting Straight Adapter

144711621
98B12160006: RNCC: 3 | RNVC: 2
40342783: RNCC: 5 | RNVC: 2

2 Aug 1994

4730-14-516-7429
Tube Tee

145167429
5202098: RNCC: 3 | RNVC: 2
Y00005944: RNCC: 3 | RNVC: 2
Y00005944: RNCC: 5 | RNVC: 9

13 Oct 1999

4730-14-202-3766
Tube Coupling Inverted Nut

142023766
R5408: RNCC: 3 | RNVC: 2
91361007: RNCC: 5 | RNVC: 2
021192: RNCC: 5 | RNVC: 2
91361007: RNCC: 5 | RNVC: 9
91361007: RNCC: 5 | RNVC: 9

1 Jan 1963

4730-14-391-6434
Quick Disconnect Coupling Assembly

143916434
9959346: RNCC: 3 | RNVC: 2
9959346: RNCC: 5 | RNVC: 9

21 Mar 1984

4730-14-547-6710
Tube Tee

145476710
0162772007: RNCC: 3 | RNVC: 2
444370M: RNCC: 5 | RNVC: 2
162781: RNCC: 5 | RNVC: 2

25 Oct 2005

4730-14-501-8866
Tube To Gas Fitting Straight Adapter

145018866
77719470K: RNCC: 3 | RNVC: 2
301734E: RNCC: 5 | RNVC: 2

19 Nov 1997

4730-14-242-4243
Fluid Pressure Line Multiple Connector

142424243
B263664: RNCC: 3 | RNVC: 2
0853557000: RNCC: 5 | RNVC: 2
263664: RNCC: 5 | RNVC: 9
711432: RNCC: 5 | RNVC: 9
DBAB263664: RNCC: 5 | RNVC: 9
0853557000: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-496-3736
Tube To Boss Straight Adapter

144963736
186276: RNCC: 3 | RNVC: 2
F300 0T 021 4614: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-376-3548
Pipe Flange

143763548
065-30-9013PL2DN80: RNCC: 3 | RNVC: 2

30 Mar 1982

4730-14-383-9615
Tete De Jet

143839615
504317202: RNCC: 3 | RNVC: 9
10032: RNCC: 5 | RNVC: 9

4 May 1983

4730-14-440-5708
Tube Tee

144405708
LN326-045REP01: RNCC: 3 | RNVC: 2
LN326-045 10,2-10,2-10,2: RNCC: 5 | RNVC: 2

18 Jul 1990

4730-14-576-2786
Fluid Flow Restrictor

145762786
55-2553239-01: RNCC: 3 | RNVC: 2

11 Jun 2013

4730-14-223-5122
Raccord Intermediai

142235122
773-410-873F21: RNCC: 3 | RNVC: 2
773-410-873F21: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-390-6806
Pipe Flange

143906806
260090008: RNCC: 3 | RNVC: 2

26 Jan 1984

4730-14-399-2797
Fluid Pressure Line Multiple Connector

143992797
A21A221278021: RNCC: 3 | RNVC: 2

6 Mar 1985

4730-14-296-8304
Tube To Boss Straight Adapter

142968304
AA6X10X100: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-506-8474
Hydraulic Manifold Assembly

145068474
COL-Q92324X0N: RNCC: 3 | RNVC: 2

27 May 1998

4730-14-427-1929
Fluid Pressure Line Multiple Connector

144271929
462047: RNCC: 3 | RNVC: 2
462047: RNCC: 5 | RNVC: 2

6 Oct 1988

4730-14-407-8869
Pipe Coupling Leak Repair Clamp

144078869
1148: RNCC: 3 | RNVC: 2

5 Mar 1986

4730-14-408-0624
Quick-Disconnect Nipple

144080624
2497092: RNCC: 3 | RNVC: 2
FOE2497092: RNCC: 5 | RNVC: 9

19 Mar 1986

4730-14-208-1696
Fluid Passage Bolt

142081696
50844N: RNCC: 3 | RNVC: 2
427068: RNCC: 5 | RNVC: 2
VDP3368: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-504-5322
Flange To Hose Elbow

145045322
3571C021: RNCC: 3 | RNVC: 2

18 Feb 1998

4730-14-484-6597
Hydraulic System Accessories Manifold

144846597
29404297: RNCC: 3 | RNVC: 2

28 Nov 1996

4730-14-399-0132
Tube To Boss Straight Adapter

143990132
H102855: RNCC: 3 | RNVC: 2

6 Mar 1985

4730-14-517-0892
Hydraulic System Accessories Manifold

145170892
2078: RNCC: 3 | RNVC: 2
2078: RNCC: 5 | RNVC: 2
FES2078: RNCC: 5 | RNVC: 9

3 Nov 1999

4730-14-538-2209
Tube Coupling

145382209
NGM0010032981679: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-452-5597
Pipe Flange

144525597
LN320033F27DN32EXT36: RNCC: 3 | RNVC: 2

13 Jan 1992

4730-14-487-4910
Fluid Pressure Line Multiple Connector

144874910
261472: RNCC: 3 | RNVC: 2

10 Apr 1997

4730-14-277-2822
Tube Tee

142772822
Q1-5TR20X10X14NN: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-361-5598
Pipe Flange

143615598
U1194-38Z2CND17-13: RNCC: 2 | RNVC: 2

24 Jan 1980

4730-14-471-8361
Cale De Reglage

144718361
MAT166-0095F10: RNCC: 3 | RNVC: 2

21 Sep 1994

4730-14-432-4682
Pipe Flange

144324682
BN329-506C2DN40: RNCC: 3 | RNVC: 2

14 Jun 1989

4730-14-478-5965
Tube Coupling

144785965
RAC538060012: RNCC: 3 | RNVC: 2

8 Nov 1995

4730-14-365-9709
Sediment Strainer Element

143659709
559007: RNCC: 3 | RNVC: 2

4 Nov 1980

4730-14-559-5539
Hose Clamp

145595539
926.191: RNCC: 3 | RNVC: 2

23 Jan 2009

4730-14-561-6061
Tube To Boss Straight Adapter

145616061
10WMLOWLNMLS: RNCC: 3 | RNVC: 2
20 250 100 2880: RNCC: 5 | RNVC: 2

4 Aug 2009

4730-14-362-1402

4730-14-238-9857
Fluid Passage Bolt

142389857
NO PRIMARY REF14-238-9857: RNCC: 3 | RNVC: 2
RSD5016-15: RNCC: 5 | RNVC: 9
SD5016-15: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-305-6318
Tube To Boss Straight Adapter

143056318
Q1-52-12-16-125: RNCC: 3 | RNVC: 2

1 Jan 1974

Load More Results