What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 71 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 71 of 185

4730-14-256-7023

4730-14-260-9139
Pipe Flange

142609139
7062CB1F1-216AF42-2: RNCC: 2 | RNVC: 2
4730CD-219,1: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-397-7001
Embout Filete A Sou

143977001
GSM164-023F24: RNCC: 3 | RNVC: 2
MAT164-0355F24: RNCC: 3 | RNVC: 2
4730ACF3PN250DE26,67: RNCC: 3 | RNVC: 9

14 Dec 1984

4730-14-275-1170
Tube Tee

142751170
EN10242-B1-1 1/2X1/2X1 1/2-FE-A: RNCC: 2 | RNVC: 2
770130164: RNCC: 3 | RNVC: 2
130-1 1-2X1-2X1 1-2: RNCC: 5 | RNVC: 2
770 130 164: RNCC: 5 | RNVC: 2
E29801B1HDH: RNCC: 5 | RNVC: 9
50-1 1-2X1-2X1 1-2: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-361-0136
Coulisseau

143610136
NO PRIMARY REF14-361-0136: RNCC: 3 | RNVC: 2
15D12-5421-61: RNCC: 5 | RNVC: 9

19 Dec 1979

4730-14-231-5755
Anchor And Reinforcement Pipe Clamp

142315755
NO PRIMARY REF14-231-5755: RNCC: 3 | RNVC: 2
840T33X42: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-389-6414
Fluid Filter Element

143896414
10-200-11: RNCC: 3 | RNVC: 9
1020011: RNCC: 3 | RNVC: 9
10-200-11C: RNCC: 5 | RNVC: 9

20 Dec 1983

4730-14-344-6921
Bulkhead Hose Connector

143446921
EA1M705-30-890: RNCC: 3 | RNVC: 2

9 Sep 1977

4730-14-572-9244
Suction Pump Connector

145729244
NO PRIMARY REF 14-572-9244: RNCC: 3 | RNVC: 2
DEMI000031: RNCC: 5 | RNVC: 2

28 Aug 2012

4730-14-448-8312
Tube Fitting Socket Welded Ferrule

144488312
4730HQ-2DE88,8: RNCC: 2 | RNVC: 2
Y07134-03-0000P002DE88,8: RNCC: 3 | RNVC: 2

17 Jul 1991

4730-14-237-7621
Raccord Coude

142377621
RA6206: RNCC: 3 | RNVC: 2
282316: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-320-1620
Support Tuyaut Ense

143201620
0249967330: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-457-9828
Ens.Tube Reducteur

144579828
E1-2: RNCC: 3 | RNVC: 2

2 Oct 1992

4730-14-474-8520
Quick-Disconnect Nipple

144748520
2-90355: RNCC: 3 | RNVC: 2

8 Mar 1995

4730-14-373-3095
Tube To Boss Straight Adapter

143733095
A23056-4: RNCC: 3 | RNVC: 2
A23056-4: RNCC: 5 | RNVC: 2

21 Oct 1981

4730-14-386-4231
Tube To Boss Straight Adapter

143864231
ARL10-6: RNCC: 3 | RNVC: 9

24 Aug 1983

4730-14-397-6899
Quick Disconnect Coupling Half

143976899
NC 011 402 0: RNCC: 3 | RNVC: 2
NC0114020: RNCC: 5 | RNVC: 2

14 Dec 1984

4730-14-411-5459
Bloc Fore

144115459
590423: RNCC: 3 | RNVC: 2

20 Aug 1986

4730-14-261-8507
Pipe Flange

142618507
RUHB7-30-8: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-238-6750
Pipeline Flexible Spacer

142386750
300053-1-2E120: RNCC: 3 | RNVC: 9
044AT71DREP5: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-252-9746
Tube To Boss Straight Adapter

142529746
9-6-8XG1-8: RNCC: 3 | RNVC: 2
9GAZC06-8XG1-8: RNCC: 3 | RNVC: 2
FIG9: RNCC: 3 | RNVC: 2
9-6-8XG1-8: RNCC: 3 | RNVC: 2
FIG9-6X8G1-8: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-428-9490
Pipe Flange

144289490
4730JAPN150DN400-11D1S-22,2: RNCC: 2 | RNVC: 2

28 Dec 1988

4730-14-455-2897
Swivel Flange To Hose Connector

144552897
4002-9-05: RNCC: 3 | RNVC: 2

21 May 1992

4730-14-426-7692
Tube Tee

144267692
4730HEING048,3X3,6-21,3X2: RNCC: 2 | RNVC: 2

21 Sep 1988

4730-14-479-0374
Bulkhead Hose Connector

144790374
502-517-096-6: RNCC: 3 | RNVC: 2

6 Dec 1995

4730-14-223-2886
Collecteur Circuit

142232886
A10-77-060-11-0: RNCC: 3 | RNVC: 2
A10-77-060-11-0: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-462-1954
Fluid Passage Bolt

144621954
0000137933: RNCC: 3 | RNVC: 2
137933: RNCC: 5 | RNVC: 2

15 Apr 1993

4730-14-230-5965
Raccord Droit Speci

142305965
3655-28D: RNCC: 3 | RNVC: 2
3655-28D: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-255-4599
Raccord Special Cir

142554599
3265-20803-602: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-292-2289
Raccord Special

142922289
702A30-0913-20: RNCC: 3 | RNVC: 2

21 Feb 1996

4730-14-391-6796
Quick Disconnect Coupling Half

143916796
RBE06-2151IA3: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-316-7975
Tube To Boss Straight Adapter

143167975
773-410-323DET1: RNCC: 3 | RNVC: 2
773-410-323DET1: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-530-5747
Fluid Pressure Line Multiple Connector

145305747
WH20-PSR: RNCC: 3 | RNVC: 2
SYB5229: RNCC: 5 | RNVC: 2

25 Jun 2002

4730-14-421-6673
Sediment Strainer Element

144216673
00656: RNCC: 3 | RNVC: 2
4860-89-032: RNCC: 5 | RNVC: 9
00656: RNCC: 5 | RNVC: 9

25 Jan 1988

4730-14-378-6619
Tube Fitting Clinch Sleeve

143786619
LL001-CS12S: RNCC: 3 | RNVC: 2
84241200: RNCC: 5 | RNVC: 2

11 Aug 1982

4730-14-281-7387
Tube Coupling

142817387
NO PRIMARY REF14-281-7387: RNCC: 3 | RNVC: 2
WBB30BW20E: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-410-7733
Quick Disconnect Coupling Half

144107733
RBE11-1813/IA: RNCC: 3 | RNVC: 2
RBE11-1813IA: RNCC: 5 | RNVC: 2

9 Jul 1986

4730-14-360-3271
Tube To Boss Straight Adapter

143603271
A120-22X150: RNCC: 3 | RNVC: 2
9901-20-82: RNCC: 5 | RNVC: 2
5000496963: RNCC: 5 | RNVC: 2
5000496963: RNCC: 5 | RNVC: 9

23 Nov 1979

4730-14-321-9627
Pipe Flange

143219627
MEC10000: RNCC: 3 | RNVC: 2
MAT147-0045F1: RNCC: 3 | RNVC: 2
MAT147-0044: RNCC: 4 | RNVC: 1
GSM147-005F5: RNCC: 5 | RNVC: 2
GSM147-05F5: RNCC: 5 | RNVC: 2
MAT147-0049: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-041-2326
Tube To Boss Straight Adapter

140412326
Q1-52-35-33X42C0: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-371-0461
Tube Fitting Clinch Sleeve

143710461
4730AB4.6DN30: RNCC: 2 | RNVC: 2
6016182449: RNCC: 3 | RNVC: 2
84243000: RNCC: 5 | RNVC: 2
LL001-CS30S: RNCC: 5 | RNVC: 2

5 Jun 1981

4730-14-315-7744
Corps De Presse-Eto

143157744
R28129-1SMDET7: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-441-7546
Quick Disconnect Coupling Half

144417546
RBA06-6101: RNCC: 3 | RNVC: 2

17 Sep 1990

4730-14-530-4641
Threaded Tube Fitting Plug

145304641
702A30-5500-48: RNCC: 3 | RNVC: 2

12 Jun 2002

4730-14-426-7705
Tube Tee

144267705
4730HEING048,3X5-42,4X5: RNCC: 2 | RNVC: 2

21 Sep 1988

4730-14-340-6352
Fluid Pressure Line Multiple Connector

143406352
9118147866: RNCC: 3 | RNVC: 2
CA21R14-18-150: RNCC: 5 | RNVC: 9

14 Feb 1977

4730-14-568-5808
Tube Reducer

145685808
ABS0335-10-08: RNCC: 1 | RNVC: 2
PE20101-1008: RNCC: 3 | RNVC: 2
ABS0335-10-08: RNCC: 5 | RNVC: 2

21 Jun 2011

4730-14-360-3966
Sediment Strainer Element

143603966
2803-0050: RNCC: 3 | RNVC: 2
SAF2803-0050: RNCC: 5 | RNVC: 9

23 Nov 1979

4730-14-242-8000
Tube Tee

142428000
NG40901-4APL64N0M1: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-222-6554
Tube Fitting Brazing Ferrule

142226554
GSM1297F1AF1BTABLEAU2D1-30I21: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-408-4397
Tube To Boss Straight Adapter

144084397
4730AJ4.3DN30NU: RNCC: 2 | RNVC: 2
Q15GE30S1-BSPNU: RNCC: 3 | RNVC: 2
MEC10814: RNCC: 3 | RNVC: 2
8401303466NU: RNCC: 5 | RNVC: 2

27 Mar 1986

4730-14-374-1372
Tube Tee

143741372
713.B.10.06.10: RNCC: 3 | RNVC: 2
P165B100610: RNCC: 3 | RNVC: 2
74713B100610: RNCC: 5 | RNVC: 2
DHS613-641-43: RNCC: 5 | RNVC: 2
713B100610: RNCC: 5 | RNVC: 2
713 B 10 06 10: RNCC: 5 | RNVC: 2
713B10 06 10: RNCC: 5 | RNVC: 2
713B10-06-10: RNCC: 5 | RNVC: 2
74713B100610: RNCC: 5 | RNVC: 2

8 Dec 1981

4730-14-550-8608
Tube Coupling

145508608
23REDN/LN329/042-F10/19-1/4DN8: RNCC: 3 | RNVC: 2

25 Jul 2006

4730-14-333-4036
Tube Coupling Assembly

143334036
0-3601S25A: RNCC: 3 | RNVC: 2
0-3601S25A: RNCC: 5 | RNVC: 9
85-688-9382: RNCC: 6 | RNVC: 9

2 Jul 1975

4730-14-312-7949

4730-14-239-9967
Te De Reduction Ens

142399967
5TR10X14X10NN: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-223-8496
Barillet Air Compri

142238496
7693-8213: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-230-9264

4730-14-569-0690
Quick Disconnect Coupling Half

145690690
7M1019: RNCC: 3 | RNVC: 2

3 Aug 2011

4730-14-356-0675

4730-14-395-3678
Embout A Souder

143953678
N0189F67A: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-303-0476
Raccord Special

143030476
2-12490: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-466-3644
Self-Sealing Coupling Assembly

144663644
690A16-4: RNCC: 3 | RNVC: 2
690A16-4: RNCC: 5 | RNVC: 2
690A16-4: RNCC: 5 | RNVC: 9

3 Nov 1993

4730-14-414-6615
Tube Fitting Socket Welded Ferrule

144146615
4730HK-EME21,3X2,6: RNCC: 2 | RNVC: 2
MEC10474: RNCC: 3 | RNVC: 2

20 Feb 1987

4730-14-497-0161
Racc.Union

144970161
09038733: RNCC: 3 | RNVC: 2
F300 0T 022 5470: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-559-8604
Straight Tubing Connector

145598604
10211-5220: RNCC: 3 | RNVC: 2

25 Feb 2009

4730-14-363-9886

4730-14-392-0000

4730-14-344-5089

4730-14-488-1651
Bulkhead Hose Connector

144881651
200479-1: RNCC: 3 | RNVC: 2
NR001500160: RNCC: 5 | RNVC: 2

18 Apr 1997

4730-14-270-0125

4730-14-403-0389
Quick Disconnect Coupling Half

144030389
RBE11-71030D9: RNCC: 3 | RNVC: 2

25 Jul 1985

4730-14-349-6217
Tube To Boss Straight Adapter

143496217
NO PRIMARY REF14-349-6217: RNCC: 3 | RNVC: 2
4CA0163REP5: RNCC: 5 | RNVC: 9

22 May 1978

4730-14-461-3675
Bulkhead Hose Connector

144613675
0176-752021: RNCC: 3 | RNVC: 2

9 Mar 1993

4730-14-553-3938
Tube Tee

145533938
M4721303800000: RNCC: 3 | RNVC: 2
M4721303800000: RNCC: 5 | RNVC: 2

29 Mar 2007

4730-14-548-4905
Tube Fitting Clinch Sleeve

145484905
5010596368: RNCC: 3 | RNVC: 2

23 Jan 2006

4730-14-413-4706
Quick Disconnect Coupling Half

144134706
BN324578F6: RNCC: 3 | RNVC: 2
BN324578F6DN125: RNCC: 3 | RNVC: 2
RAB9537: RNCC: 5 | RNVC: 2

17 Dec 1986

4730-14-542-7106
Fluid Passage Bolt

145427106
2050000100: RNCC: 3 | RNVC: 2

28 Jul 2004

4730-14-444-7420
Tube To Boss Straight Adapter

144447420
123621413: RNCC: 3 | RNVC: 9

21 Jan 1991

4730-14-445-0647
Lubrication Fitting

144450647
GF90016: RNCC: 3 | RNVC: 2
GF90016: RNCC: 5 | RNVC: 2
GF90016: RNCC: 5 | RNVC: 9

31 Jan 1991

4730-14-504-7031
Return Tube Bend

145047031
455883Q: RNCC: 3 | RNVC: 2
5001833869: RNCC: 3 | RNVC: 2

27 Feb 1998

4730-14-271-6598
Bague Bi-Conique

142716598
7032001: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-202-3762
Tube Fitting Clinch Sleeve

142023762
405-12RR: RNCC: 3 | RNVC: 2

1 Jan 1963

4730-14-494-7015
Tube To Boss Straight Adapter

144947015
NO PRIMARY REF14-494-7015: RNCC: 3 | RNVC: 2
017276: RNCC: 5 | RNVC: 9
F300 0T 017 8018: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-242-7965
Tube Tee

142427965
NG413-44PL5: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-396-0270
Tube To Boss Straight Adapter

143960270
NO PRIMARY REF14-396-0270: RNCC: 3 | RNVC: 2
13318170: RNCC: 5 | RNVC: 9

27 Nov 1984

4730-14-414-2309
Pipe Flange

144142309
U1240-11D1SPN150DN40Z2CND17-12T3: RNCC: 3 | RNVC: 2

27 Jan 1987

4730-14-328-9575
Tube Tee

143289575
Q1-5TR36X25X36NNNU: RNCC: 3 | RNVC: 2
TRK36X25X36NNU: RNCC: 3 | RNVC: 2
10RCA36X25X36NU: RNCC: 3 | RNVC: 2
GSM164-012F43: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-256-9322
Pipe Flange

142569322
RUHB6-17-10: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-521-7707
Fluid Passage Bolt

145217707
43312DE120A: RNCC: 2 | RNVC: 2
12120854: RNCC: 3 | RNVC: 2
3560-12AU4G: RNCC: 5 | RNVC: 1
L43312-120DEA: RNCC: 5 | RNVC: 2
BC3560-8DEA: RNCC: 5 | RNVC: 2
91756680: RNCC: 5 | RNVC: 2

13 Sep 2000

4730-14-311-7844
Pipe Flange

143117844
40CF1297-1510: RNCC: 3 | RNVC: 2
SEAS41681: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-263-8906
Tube To Boss Straight Adapter

142638906
702A30-0705-20: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-289-8776
Bulkhead Hose Connector

142898776
R4A741-002: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-432-7934
Tube To Boss Straight Adapter

144327934
S3110CD: RNCC: 3 | RNVC: 2
S3110X: RNCC: 5 | RNVC: 2
85-692-8723: RNCC: 6 | RNVC: 9

27 Jun 1989

4730-14-279-0547
Tube Tee

142790547
9150011966: RNCC: 3 | RNVC: 2
CAR7-25-14-25HP: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-379-0682
Lubricant Pressure Relief Fitting

143790682
078-40-021: RNCC: 3 | RNVC: 2
7864260001: RNCC: 5 | RNVC: 2
78642600011111: RNCC: 5 | RNVC: 2

6 Sep 1982

4730-14-405-0725
Tube-Hose Fitting Compression Sleeve

144050725
NO PRIMARY REF14-405-0725: RNCC: 3 | RNVC: 2
BA15CDZ: RNCC: 5 | RNVC: 9

20 Nov 1985

4730-14-494-7018
Tube To Boss Straight Adapter

144947018
NO PRIMARY REF14-494-7018: RNCC: 3 | RNVC: 2
017526: RNCC: 5 | RNVC: 9
F300 0T 017 8022: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-041-2491
Tube Fitting Clinch Sleeve

140412491
605-44-5: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-494-0937
Tube To Boss Straight Adapter

144940937
GE12-PL/R1/4-ED: RNCC: 3 | RNVC: 2
GE12PLR1-4: RNCC: 5 | RNVC: 2
F300 0T 015 4443: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-493-7636
Tube To Boss Straight Adapter

144937636
NO PRIMARY REF14-493-7636: RNCC: 3 | RNVC: 2
334174: RNCC: 5 | RNVC: 9
F300 0T 013 9663: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-557-3083
Special Nipple

145573083
DET05AEBTDAM006: RNCC: 3 | RNVC: 2

2 Jun 2008

4730-14-347-1970

4730-14-358-7240

4730-14-278-9572

4730-14-261-5825
Bouchon Special

142615825
101489: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-252-1749

4730-14-561-6694
Fluid Passage Bolt

145616694
7509281G00: RNCC: 3 | RNVC: 2

19 Aug 2009

4730-14-343-2062

4730-14-324-1317

4730-14-289-7735

4730-14-496-4316
Graisseur

144964316
226: RNCC: 3 | RNVC: 2
F300 0T 021 5231: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-236-6340

4730-14-276-2065

4730-14-367-7227

4730-14-395-3747
Obturateur

143953747
N0188F31A: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-301-7188
Silencieux De Purge

143017188
R33595SM: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-240-6847
Adaptateur Special

142406847
PR47572: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-293-6734
Fluid Passage Bolt

142936734
20629401-7: RNCC: 3 | RNVC: 2
VSM051: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-500-7324
Fluid Pressure Line Multiple Connector

145007324
A07051307: RNCC: 3 | RNVC: 2
13DS16 1-2NU: RNCC: 5 | RNVC: 9
A07051307: RNCC: 5 | RNVC: 9
F300 0T 024 7520: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-261-8145
Prise Double De Pre

142618145
24156006600: RNCC: 3 | RNVC: 2
156J266: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-213-0114
Sediment Strainer Body

142130114
04121022: RNCC: 3 | RNVC: 2
4121-2: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-426-7784
Tube Tee

144267784
4730HEING076,1X2,9-60,3X2,9: RNCC: 2 | RNVC: 2

21 Sep 1988

4730-14-250-8059

4730-14-248-4228

4730-14-498-9777
Self-Sealing Coupling Half

144989777
NO PRIMARY REF14-498-9777: RNCC: 3 | RNVC: 2
C-SAE1S60BT-D25: RNCC: 5 | RNVC: 9
CSAE1S60BTD25: RNCC: 5 | RNVC: 9
F300 0T 014 6570: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-458-8007
Hose To Grooved Clamp Coupling Straight Adapter

144588007
41721168+GC34718: RNCC: 3 | RNVC: 2
RAR1599: RNCC: 5 | RNVC: 2
45-721-16-8: RNCC: 5 | RNVC: 2

4 Nov 1992

4730-14-398-5924
Tube Fitting Brazing Ferrule

143985924
4730AMF2PN250DE57: RNCC: 2 | RNVC: 2
GSM164-062F11Z0NEB: RNCC: 3 | RNVC: 2
MAT164-0352F11ZONEB: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-516-1882
Tube Union

145161882
NO PRIMARY REF14-516-1882: RNCC: 3 | RNVC: 2
18090483: RNCC: 5 | RNVC: 2
METAL-GRIP 48.3NBR INOX AL625: RNCC: 5 | RNVC: 2

15 Sep 1999

4730-14-455-7127
Tube Tee

144557127
TFSI12-1/4NPT: RNCC: 3 | RNVC: 2
12-2062M4NPT-SS: RNCC: 5 | RNVC: 9

11 Jun 1992

4730-14-467-8448
Hydraulic System Accessories Manifold

144678448
0521601962+2-0521601213+1-15255-: RNCC: 3 | RNVC: 1
SB2: RNCC: 5 | RNVC: 2
830-04-9801-50-4: RNCC: 5 | RNVC: 2
91621755: RNCC: 5 | RNVC: 2

27 Jan 1994

4730-14-300-4999
Hose Coupling Assembly

143004999
TAH1142-8: RNCC: 3 | RNVC: 2
TAH1142-8: RNCC: 5 | RNVC: 9
85-662-5780: RNCC: 6 | RNVC: 9

1 Jan 1973

4730-14-418-2310
Ensemble Culotte

144182310
8001135: RNCC: 3 | RNVC: 2

6 Aug 1987

4730-14-239-6324

4730-14-275-0304

4730-14-200-5744

4730-14-504-4712
Lubrication Fitting

145044712
TR95219: RNCC: 3 | RNVC: 2

18 Feb 1998

4730-14-503-2079
Tube Coupling

145032079
RP1A504901033: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-515-2679
Tube To Boss Straight Adapter

145152679
9721002015: RNCC: 3 | RNVC: 2

13 Jul 1999

4730-14-459-8846
Fluid Flow Restrictor

144598846
DLT115504: RNCC: 3 | RNVC: 2

22 Dec 1992

4730-14-543-8474
Tube To Boss Straight Adapter

145438474
560502286: RNCC: 3 | RNVC: 2

14 Dec 2004

4730-14-476-8066
Filler Cap Adapter Assembly

144768066
B3471597: RNCC: 3 | RNVC: 2
RAB3930: RNCC: 5 | RNVC: 2
471597: RNCC: 5 | RNVC: 2

4 Jul 1995

4730-14-520-1398
Hydraulic Swivel Joint

145201398
45249962: RNCC: 3 | RNVC: 2

16 May 2000

4730-14-503-1738
Bulkhead Hose Connector

145031738
RA1M534203004: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-505-6823
Pipe Flange Safety Shield

145056823
E28002000019: RNCC: 3 | RNVC: 2

26 Mar 1998

4730-14-325-9019
Pipe Flange

143259019
AS34TV107REP2: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-485-8595
Reaspiration Clapet

144858595
9009-008B: RNCC: 3 | RNVC: 9
9009-008B: RNCC: 5 | RNVC: 2
ROT9009-008B: RNCC: 5 | RNVC: 9

19 Feb 1997

4730-14-302-9934
Tube To Boss Straight Adapter

143029934
7062BB1B1966VCTT2-20UA9C337: RNCC: 2 | RNVC: 2

1 Jan 1973

4730-14-395-4220
Tube Coupling

143954220
GM10011-64: RNCC: 3 | RNVC: 2
43255324: RNCC: 5 | RNVC: 2
99637650040: RNCC: 5 | RNVC: 2

13 Oct 1984

4730-14-500-6251
Tube Tee

145006251
EVL22-L0MDKA3C: RNCC: 3 | RNVC: 2
EVL22L0MDKA3C: RNCC: 5 | RNVC: 2
F300 0T 024 6435: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-316-2068
Tube To Boss Straight Adapter

143162068
F522-40: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-443-7511
Self-Sealing Coupling Half

144437511
VGC3/4NF: RNCC: 3 | RNVC: 2
FEMELLEVGC3-4: RNCC: 5 | RNVC: 2
91484025: RNCC: 5 | RNVC: 2

5 Dec 1990

4730-14-295-0284
Diaphragme Special

142950284
AS34TR10BREP5: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-568-4332
Tube To Hose Tee

145684332
D70803B: RNCC: 3 | RNVC: 2

31 May 2011

4730-14-323-4992

4730-14-219-2354

4730-14-331-5036
Lubrication Fitting

143315036
31: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-525-7913
Tube To Boss Straight Adapter

145257913
F145326: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-300-6456
Tube To Boss Straight Adapter

143006456
83965DET24: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-423-7338
Flange To Tube Elbow

144237338
0320710010: RNCC: 3 | RNVC: 2

28 Apr 1988

4730-14-032-3870
Tube Tee

140323870
1105A-15-21: RNCC: 3 | RNVC: 2

3 Nov 1983

4730-14-515-3596
Lubrication Fitting

145153596
9607021080: RNCC: 3 | RNVC: 2

13 Jul 1999

4730-14-436-2549
Quick Disconnect Coupling Half

144362549
HA0532100: RNCC: 3 | RNVC: 2
239525D: RNCC: 5 | RNVC: 2

12 Dec 1989

4730-14-323-5686
Tube To Boss Straight Adapter

143235686
A3741: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-484-6613
Hydraulic System Accessories Manifold

144846613
29404922: RNCC: 3 | RNVC: 2

28 Nov 1996

4730-14-367-1914
Fluid Passage Bolt

143671914
DLT024782: RNCC: 3 | RNVC: 2

11 Dec 1980

4730-14-497-3872
Tube To Boss Straight Adapter

144973872
N118127: RNCC: 3 | RNVC: 2
F300 0T 023 1091: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-429-8434
Tube Tee

144298434
T12SA3C: RNCC: 3 | RNVC: 2
T12SA3C: RNCC: 3 | RNVC: 9
RAR1410: RNCC: 5 | RNVC: 2
T12PS: RNCC: 5 | RNVC: 9

14 Feb 1989

4730-14-500-2494
Tube To Boss Straight Adapter

145002494
377578X1: RNCC: 3 | RNVC: 2
F300 0T 024 2550: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-311-7874
Pipe Flange

143117874
45463: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-378-0522
Tube To Boss Straight Adapter

143780522
SEB00253: RNCC: 3 | RNVC: 2
ZB1218SEB0253: RNCC: 5 | RNVC: 2
29515155: RNCC: 5 | RNVC: 2
1111540000: RNCC: 5 | RNVC: 2
1375061702: RNCC: 5 | RNVC: 2
ZB1218SEB00253: RNCC: 5 | RNVC: 2
M4ZS460D8953: RNCC: 5 | RNVC: 2
DAHSEB00253: RNCC: 5 | RNVC: 9
65077102: RNCC: 5 | RNVC: 9
MAF0000000187: RNCC: 6 | RNVC: 9

20 Jul 1982

4730-14-525-6304
Return Tube Bend

145256304
20 236 913 2150: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-379-6971
Sediment Strainer Element

143796971
7N6D: RNCC: 3 | RNVC: 2

20 Oct 1982

4730-14-447-2822
Fluid Pressure Line Multiple Connector

144472822
BJIISO20: RNCC: 3 | RNVC: 9
91507019: RNCC: 5 | RNVC: 2

15 May 1991

4730-14-496-1094
Fluid Pressure Line Multiple Connector

144961094
0MA6X10-100NNECJ8: RNCC: 3 | RNVC: 2
F300 0T 020 9124: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-434-6956
Adaptateur Bride

144346956
BN329515C2DN100INOX: RNCC: 3 | RNVC: 2

2 Oct 1989

4730-14-328-2592

4730-14-377-6532

4730-14-576-9181
Hose Clamp

145769181
ASNA0032H232: RNCC: 1 | RNVC: 2
FX08 212-232 C8 H W4: RNCC: 3 | RNVC: 9
ASNA0032H232: RNCC: 5 | RNVC: 2

23 Jul 2013

4730-14-273-0946
Tube Tee

142730946
130 3-4X3-8X3-4Z: RNCC: 3 | RNVC: 2
51 3-4X3-8X3-4Z: RNCC: 5 | RNVC: 9
E29801B1ECEZ: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-444-7819
Fluid Pressure Line Multiple Connector

144447819
13DS16/1/2: RNCC: 3 | RNVC: 2
7013101304: RNCC: 5 | RNVC: 2
13DS16/15-21CYL: RNCC: 5 | RNVC: 2
568089: RNCC: 5 | RNVC: 2
568089: RNCC: 5 | RNVC: 9
F300 0T 009 9596: RNCC: 6 | RNVC: 9

22 Jan 1991

4730-14-402-6566
Tube To Gas Fitting Straight Adapter

144026566
G12-13 3-8BGSNU: RNCC: 3 | RNVC: 2
UMAG13X3-8BGSNNU: RNCC: 3 | RNVC: 2
4AG13 3-8BGSNU: RNCC: 3 | RNVC: 2

19 Jul 1985

4730-14-298-3559
Tube To Boss Straight Adapter

142983559
9916001: RNCC: 3 | RNVC: 2
9-91-60-01: RNCC: 5 | RNVC: 9
9916001: RNCC: 5 | RNVC: 9
2-11-31-25: RNCC: 5 | RNVC: 9
2113125: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-274-8417
Collier Pr Allonge

142748417
NO PRIMARY REF14-274-8417: RNCC: 3 | RNVC: 2
33K17: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-561-7334
Hose Clamp

145617334
NO PRIMARY REF 14-561-7334: RNCC: 3 | RNVC: 2
PRI240000017: RNCC: 5 | RNVC: 2

31 Aug 2009

4730-14-424-5525
Quick Disconnect Wye

144245525
RCS11-8104: RNCC: 3 | RNVC: 2

27 May 1988

4730-14-450-4059
Quick Disconnect Coupling Assembly

144504059
RID06-1810: RNCC: 3 | RNVC: 2
RID6-1810: RNCC: 5 | RNVC: 2

4 Oct 1991

4730-14-471-5079
Quick Disconnect Coupling Half

144715079
RBE03-2200-0DIC4-5HPFB: RNCC: 3 | RNVC: 2

31 Aug 1994

4730-14-390-4468
Fluid Pressure Line Multiple Connector

143904468
DIV105-02: RNCC: 3 | RNVC: 2

26 Jan 1984

4730-14-277-6193
Tube To Boss Straight Adapter

142776193
7062BB1B1966RCET2-10UA9: RNCC: 4 | RNVC: 1

1 Jan 1971

4730-14-417-0087
Tube Tee

144170087
4730AB4.1DN14NU: RNCC: 2 | RNVC: 2
LN329-017REP41: RNCC: 3 | RNVC: 2
LV300-NS14S: RNCC: 3 | RNVC: 2
84041400NU: RNCC: 5 | RNVC: 2

25 Jun 1987

4730-14-265-2373
Tube Fitting Clinch Sleeve

142652373
605-38: RNCC: 3 | RNVC: 2
DL38N: RNCC: 3 | RNVC: 2
1L38: RNCC: 3 | RNVC: 2
BEL38: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-457-8006
Pipe Flange

144578006
4730JADN125-11B2S: RNCC: 2 | RNVC: 2

24 Sep 1992

4730-14-326-6496

4730-14-571-5071
Quick Disconnect Wye

145715071
3140 06 00: RNCC: 3 | RNVC: 2

30 Mar 2012

4730-14-570-8559
Pipe To Gas Fitting Straight Adapter

145708559
AMJ 116 272 OR: RNCC: 3 | RNVC: 2
AMJ 116 272 OR: RNCC: 5 | RNVC: 2

30 Jan 2012

4730-14-561-1559
Flange To Flange Straight Adapter

145611559
R901078947: RNCC: 3 | RNVC: 2

22 Jun 2009

4730-14-225-0617
Repartiteur Deux Vo

142250617
4790P48B: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-516-2100
Tube To Boss Straight Adapter

145162100
0015210: RNCC: 3 | RNVC: 2

15 Sep 1999

4730-14-449-9987
Colma Indic Raccord

144499987
5000915206: RNCC: 3 | RNVC: 2

18 Sep 1991

4730-14-292-4562
Self-Sealing Coupling Half

142924562
C28AA0201: RNCC: 3 | RNVC: 2
C28AA0201: RNCC: 5 | RNVC: 2
C28AA0201: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-325-8996
Pipe Flange

143258996
AS34TV105REP7: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-402-6942
Fluid Pressure Line Multiple Connector

144026942
210084: RNCC: 3 | RNVC: 2

19 Jul 1985

4730-14-521-9243
Tube Coupling

145219243
5005130293: RNCC: 3 | RNVC: 2
5005130293: RNCC: 3 | RNVC: 9

26 Sep 2000

4730-14-426-7381
Tube Tee

144267381
4730HEEG088,9X11: RNCC: 2 | RNVC: 2

20 Sep 1988

4730-14-252-7118
Fluid Passage Bolt

142527118
11203210C: RNCC: 3 | RNVC: 2
20321: RNCC: 5 | RNVC: 2

1 Jan 1968

4730-14-281-0547
Raccord Avec Ecrou

142810547
RK5444REPLA: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-239-4995
Reducteur Pour Tube

142394995
0176-525038: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-276-2062
Jeu De Bagues

142762062
6784-1DM63: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-556-7319
Hose Elbow

145567319
8090 1628: RNCC: 3 | RNVC: 2

7 Apr 2008

4730-14-247-3469
Raccord Special

142473469
321A11-0330-20: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-454-2041
Sand Blast Nozzle

144542041
09-0188: RNCC: 3 | RNVC: 2

26 Mar 1992

4730-14-273-5204
Pipe Flange

142735204
7062TA1F1-36UA9NFEM: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-213-5870
Equipe Bloc Raccord

142135870
M3E781-16: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-329-3341
Pipe Flange

143293341
NO PRIMARY REF14-329-3341: RNCC: 3 | RNVC: 2
325-1861-4BRIDE: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-373-0583
Tube Union

143730583
MAT111-01-00-1: RNCC: 3 | RNVC: 2

21 Sep 1981

4730-14-416-3078
Tube To Boss Straight Adapter

144163078
Q15GE10S3/8BSPK NU: RNCC: 3 | RNVC: 2
8905101766NU: RNCC: 5 | RNVC: 2

3 Jun 1987

4730-14-343-7631
Fluid Passage Bolt

143437631
F230-13-03: RNCC: 3 | RNVC: 2

13 Jul 1977

4730-14-456-5938
Tube To Boss Straight Adapter

144565938
4A12-18X150SNU: RNCC: 3 | RNVC: 2
ATAS05808: RNCC: 5 | RNVC: 2
5005030415: RNCC: 5 | RNVC: 2

9 Jul 1992

4730-14-340-0862
Sediment Strainer Element

143400862
E10-0100-6802-98-98: RNCC: 3 | RNVC: 9
E10-100-6802-98-98: RNCC: 5 | RNVC: 9

18 Jan 1977

4730-14-441-4891
Fluid Flow Restrictor

144414891
332A72-1033-22: RNCC: 3 | RNVC: 2

30 Aug 1990

4730-14-440-1224
Bride A Zinc

144401224
MAT162-0117F14: RNCC: 3 | RNVC: 2

11 Jul 1990

4730-14-578-0746
Tube Nipple

145780746
0292680570: RNCC: 3 | RNVC: 2

28 Oct 2013

4730-14-217-5394

4730-14-355-5577

4730-14-216-5334

4730-14-574-6800
Tube Elbow

145746800
734329: RNCC: 3 | RNVC: 2
0167060: RNCC: 5 | RNVC: 2

12 Feb 2013

4730-14-339-8338

4730-14-569-1250
Quick Disconnect Coupling Half

145691250
7M1013: RNCC: 3 | RNVC: 2

10 Aug 2011

4730-14-372-7731

4730-14-252-1698

4730-14-365-9604

4730-14-369-9073
Fluid Pressure Line Multiple Connector

143699073
5000274828: RNCC: 3 | RNVC: 2
5000274828: RNCC: 5 | RNVC: 9

18 May 1981

4730-14-575-0634
Lubrication Fitting Adapter

145750634
4F642EDMXS: RNCC: 3 | RNVC: 2
82936030014: RNCC: 5 | RNVC: 2
110035508: RNCC: 5 | RNVC: 2

12 Mar 2013

4730-14-397-7828
Tube Tee

143977828
8404080047: RNCC: 3 | RNVC: 2

28 Jan 1985

4730-14-516-9856
Tube To Boss Straight Adapter

145169856
B001B154: RNCC: 3 | RNVC: 2

28 Oct 1999

4730-14-561-5368
Split Flange Parts Kit

145615368
DLT079410: RNCC: 3 | RNVC: 2
FS0000977: RNCC: 6 | RNVC: 9

27 Jul 2009

4730-14-479-1824
Tube Fitting Socket Welded Ferrule

144791824
FI 2.12.09.01: RNCC: 3 | RNVC: 2

19 Dec 1995

4730-14-406-7552
Tube To Boss Straight Adapter

144067552
MF3LAITONNICKELE: RNCC: 3 | RNVC: 2

8 Jan 1986

4730-14-530-7020
Quick Disconnect Coupling Half

145307020
RBE11.1154.OD.IC.JE: RNCC: 3 | RNVC: 2

3 Jul 2002

4730-14-504-9391
Hose-Tube Flange Lateral

145049391
BRIDE93662X00: RNCC: 3 | RNVC: 2

11 Mar 1998

4730-14-212-0768
Tube To Boss Straight Adapter

142120768
673: RNCC: 3 | RNVC: 2

5 Jul 1980

4730-14-525-0027
Quick Disconnect Coupling Half

145250027
NBA.111: RNCC: 3 | RNVC: 2

10 May 2001

4730-14-428-0494
Support Piston Dega

144280494
03350000102519A: RNCC: 3 | RNVC: 2

24 Nov 1988

4730-14-268-1175
Fluid Flow Restrictor Unit

142681175
6784-1CI6: RNCC: 2 | RNVC: 2
MEC11356: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-324-1344
Barillet Cinq Voies

143241344
GSM163-006F6AVECECR0USRACC0RD: RNCC: 3 | RNVC: 2
GSM163-06F6AVECECR0USRACC0RD: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-394-5422
Raccord Pompe

143945422
NO PRIMARY REF14-394-5422: RNCC: 3 | RNVC: 2
54-3001-1: RNCC: 5 | RNVC: 2

28 Aug 1984

4730-14-448-7416
Pipe Flange

144487416
4730HP-1DE33,7: RNCC: 2 | RNVC: 2
Y07134-02-0000P001DE33,7: RNCC: 3 | RNVC: 2

9 Jul 1991

4730-14-512-4891
Tube Tee

145124891
713 B 10 12 10: RNCC: 3 | RNVC: 2
4730-65-0004449: RNCC: 6 | RNVC: 9

17 Feb 1999

4730-14-362-1247
Pipe Flange

143621247
U1198F4-168-3Z2CND17-13: RNCC: 2 | RNVC: 2

20 Feb 1980

4730-14-338-0807
Tube To Boss Straight Adapter

143380807
5-3601S16A: RNCC: 3 | RNVC: 2
3601-161: RNCC: 5 | RNVC: 9
5-3601S16: RNCC: 5 | RNVC: 9
5-3601S16A: RNCC: 5 | RNVC: 9

6 Nov 1976

4730-14-230-1163
Sediment Strainer Element

142301163
9209830000: RNCC: 3 | RNVC: 2
9-209830-000: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-435-3780
Quick Disconnect Coupling Half

144353780
RBE3-21000DIC: RNCC: 3 | RNVC: 2
RBE03-2100/OD/IC: RNCC: 3 | RNVC: 2
093-860-707-0: RNCC: 5 | RNVC: 2
RBE03-21000DIC: RNCC: 5 | RNVC: 2

8 Nov 1989

4730-14-351-8460
Tube To Boss Straight Adapter

143518460
UML10 3-8BSPC: RNCC: 3 | RNVC: 2

16 Oct 1978

4730-14-210-9745
Tube To Boss Straight Adapter

142109745
12-30-33X200: RNCC: 3 | RNVC: 2
121017: RNCC: 3 | RNVC: 2
4A30-33X200: RNCC: 3 | RNVC: 2
M30-33X2: RNCC: 3 | RNVC: 2
UMA30X33-200N: RNCC: 3 | RNVC: 2
99-621-30-335-1: RNCC: 5 | RNVC: 2
99-621-30-335-2: RNCC: 5 | RNVC: 2
99621303351: RNCC: 5 | RNVC: 2
99621303352: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-283-5521
Tube Tee

142835521
TE16X12X16.0.2: RNCC: 3 | RNVC: 2
TE16X12X16-0-2: RNCC: 5 | RNVC: 2
TE16X12X16-02: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-328-1610
Tuyau A Spirale Cre

143281610
4253-89-1250-2CS18TX: RNCC: 3 | RNVC: 2
4253-89-2CSTX1250: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-222-2735

4730-14-031-7816

4730-14-332-0676
Bulkhead Hose Connector

143320676
R5806Z35: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-264-6586
Tube To Boss Straight Adapter

142646586
3552: RNCC: 3 | RNVC: 2
10-748374: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-360-1340
Tube To Boss Straight Adapter

143601340
H43002078REP2: RNCC: 3 | RNVC: 2
ADA39278REP51: RNCC: 5 | RNVC: 2

31 Oct 1979

4730-14-497-4106
Fluid Flow Restrictor

144974106
1011133: RNCC: 3 | RNVC: 2
1011133: RNCC: 5 | RNVC: 2
F300 0T 023 1402: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-382-5671
Pipe Flange

143825671
20068464: RNCC: 3 | RNVC: 2
20068464: RNCC: 5 | RNVC: 9

17 Feb 1983

4730-14-499-5544
Tube To Boss Straight Adapter

144995544
E68353055: RNCC: 3 | RNVC: 2
F300 0T 023 5260: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-305-1207

4730-14-427-8497
Corps Raccord

144278497
AS34TQ103FREP1: RNCC: 3 | RNVC: 2

17 Nov 1988

4730-14-341-5318
Quick Disconnect Coupling Half

143415318
E29-573-26-34MALE: RNCC: 2 | RNVC: 2
GSM162-008F5REP3: RNCC: 3 | RNVC: 2
GSM162-08F5REP3: RNCC: 5 | RNVC: 2
1370: RNCC: 5 | RNVC: 2
1600-26X34: RNCC: 5 | RNVC: 9
306-26X34: RNCC: 5 | RNVC: 9

16 Mar 1977

4730-14-471-6477
Tube To Hose Straight Adapter

144716477
01641817: RNCC: 3 | RNVC: 2
867-140: RNCC: 5 | RNVC: 2

7 Sep 1994

4730-14-316-9013
Tube To Boss Straight Adapter

143169013
18-39286-156098: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-491-5573
Tube To Boss Straight Adapter

144915573
NO PRIMARY REF14-491-5573: RNCC: 3 | RNVC: 2
7701012655: RNCC: 5 | RNVC: 9
F300 0T 003 2812: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-491-4890
Tube To Boss Straight Adapter

144914890
NO PRIMARY REF14-491-4890: RNCC: 3 | RNVC: 2
0024571454: RNCC: 5 | RNVC: 9
F300 0T 003 1377: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-365-7522
Tube Tee

143657522
P08372-13: RNCC: 3 | RNVC: 2
P08372-13: RNCC: 3 | RNVC: 2
E4506-005: RNCC: 5 | RNVC: 2

8 Oct 1980

4730-14-441-9049
Tube Union

144419049
NO PRIMARY REF14-441-9049: RNCC: 3 | RNVC: 2
4-597577-4: RNCC: 5 | RNVC: 9

25 Sep 1990

4730-14-282-4893
Tube Tee

142824893
59-8-8-13C0NN: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-494-1250
Tube To Boss Straight Adapter

144941250
100375-37R: RNCC: 3 | RNVC: 2
F300 0T 015 5992: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-422-0813
Anchor And Reinforcement Pipe Clamp

144220813
2137: RNCC: 3 | RNVC: 2

22 Feb 1988

4730-14-344-1083

4730-14-329-7768

4730-14-342-5983

4730-14-562-9140
Pipe Nipple

145629140
01921321: RNCC: 3 | RNVC: 2

3 Dec 2009

4730-14-344-6158

4730-14-454-2312
Obturateur

144542312
EMDAS07072: RNCC: 3 | RNVC: 2

26 Mar 1992

4730-14-223-5962
Raccord De Flexible

142235962
0645230: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-509-5833

4730-14-435-1122

4730-14-553-0355
Quick Disconnect Coupling Half

145530355
RCS11-2103: RNCC: 3 | RNVC: 2

23 Feb 2007

4730-14-575-7702
Flange To Tube Elbow

145757702
M2811343100100: RNCC: 3 | RNVC: 2

30 Apr 2013

4730-14-371-3190
Tube To Boss Straight Adapter

143713190
1 1-2BSPX1 1-2BSP: RNCC: 3 | RNVC: 2
1 1-2BSPX1 1-2BSP: RNCC: 3 | RNVC: 2
M1 1-2BSPXM1 1-2BSP: RNCC: 5 | RNVC: 2

5 Aug 1981

4730-14-577-5147
Pipeline Flexible Spacer Fire Protective Cover

145775147
HOUSSE AF MX 700 PN6/GREYLOCK 1-: RNCC: 3 | RNVC: 1

20 Sep 2013

4730-14-575-9008
Tube Reducer

145759008
RED15/08LCF: RNCC: 3 | RNVC: 2
431384: RNCC: 5 | RNVC: 2

15 May 2013

4730-14-530-1057
Quick Disconnect Coupling Assembly

145301057
MCR2-6150: RNCC: 3 | RNVC: 2

14 May 2002

4730-14-537-7541
Tube Tee

145377541
TX30Y-IB: RNCC: 3 | RNVC: 2
TX30Y-IB: RNCC: 5 | RNVC: 9

19 Nov 2003

4730-14-501-2348
Tube To Boss Straight Adapter

145012348
471-022: RNCC: 3 | RNVC: 2
471.022: RNCC: 3 | RNVC: 2
F300 0T 025 2753: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-428-9446
Pipe Flange

144289446
4730JAPN150DN350-11B2S-20: RNCC: 2 | RNVC: 2

28 Dec 1988

4730-14-224-3910
Tube Fitting Brazing Ferrule

142243910
GSM163-002F7-14-1-10: RNCC: 3 | RNVC: 2
GSM163-02F7-14-1-10: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-449-9292
Tube To Boss Straight Adapter

144499292
S041121-10-3/8: RNCC: 3 | RNVC: 2

16 Sep 1991

4730-14-438-3826
Tube To Boss Straight Adapter

144383826
4730HL-1DE17,2: RNCC: 2 | RNVC: 2
Y07134-01-0000P001DE17,2: RNCC: 5 | RNVC: 2

19 Mar 1990

4730-14-537-4713
Tube To Boss Straight Adapter

145374713
711.T.06.08: RNCC: 3 | RNVC: 2
P160T0608: RNCC: 3 | RNVC: 2
74711T0608: RNCC: 5 | RNVC: 2
711 T 06 08: RNCC: 5 | RNVC: 2
711T06 08: RNCC: 5 | RNVC: 2
711T06-08: RNCC: 5 | RNVC: 2
711T0608: RNCC: 5 | RNVC: 2

3 Nov 2003

4730-14-503-2107
Tube Tee

145032107
723.T.08.10.08S: RNCC: 3 | RNVC: 2
P166T081008S: RNCC: 3 | RNVC: 2
723 T 08 10 08S: RNCC: 5 | RNVC: 2
723T08 10 08S: RNCC: 5 | RNVC: 2
723T08-10-08S: RNCC: 5 | RNVC: 2
723T081008S: RNCC: 5 | RNVC: 2
74723T081008S: RNCC: 5 | RNVC: 2
74723T081008S: RNCC: 5 | RNVC: 2

7 Jan 1998

4730-14-247-3587

4730-14-309-4123
Corps Intermediaire

143094123
NO PRIMARY REF14-309-4123: RNCC: 3 | RNVC: 2
169J681: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-202-6543

4730-14-361-6142

4730-14-370-2482

4730-14-479-3690
Raccord

144793690
7705030081: RNCC: 3 | RNVC: 2

10 Jan 1996

4730-14-570-3602
Tube Coupling Body

145703602
PER201534011: RNCC: 3 | RNVC: 2

9 Dec 2011

4730-14-322-5437

4730-14-263-6396
Tube To Boss Straight Adapter

142636396
7062BC1RPET2-14C30NCD10: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-385-9071
Tube To Boss Straight Adapter

143859071
10211110800: RNCC: 3 | RNVC: 2
DAH10211110800: RNCC: 5 | RNVC: 2

24 Aug 1983

4730-14-378-7462
Tube To Boss Straight Adapter

143787462
2-27709: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-304-4926
Fluid Pressure Line Multiple Connector

143044926
330A52-9823-00: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-511-0115
Flexible Tube Coupling Assembly

145110115
64-106M SYMETRIQUE: RNCC: 3 | RNVC: 2

25 Nov 1998

4730-14-379-1725
Quick Disconnect Coupling Half

143791725
NO PRIMARY REF14-379-1725: RNCC: 3 | RNVC: 2
19-1102SANSFILETAGE: RNCC: 5 | RNVC: 9

6 Sep 1982

4730-14-278-0948
Pipe Expansion Joint

142780948
BN327-501REP4: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-268-6301
Tube To Boss Straight Adapter

142686301
Q1-53-25-30X150: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-362-8271
Tube To Boss Straight Adapter

143628271
G12-17-12-17C0: RNCC: 3 | RNVC: 2

19 Mar 1980

4730-14-544-9127
Fluid Flow Restrictor

145449127
SB2042-01REP7: RNCC: 3 | RNVC: 2

3 Mar 2005

4730-14-390-5035
Tube To Boss Straight Adapter

143905035
NO PRIMARY REF14-390-5035: RNCC: 3 | RNVC: 2
1820AB6: RNCC: 5 | RNVC: 9

26 Jan 1984

4730-14-269-1864
Pipe Flange

142691864
7066CD1M38: RNCC: 2 | RNVC: 2
4730BB-38M: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-437-9877
Tube To Hose Straight Adapter

144379877
4A8-16X150C0NU: RNCC: 3 | RNVC: 2
204105134: RNCC: 5 | RNVC: 2

5 Mar 1990

4730-14-419-9508
Tube Tee

144199508
P4-1809-16-20X150: RNCC: 3 | RNVC: 2

10 Nov 1987

4730-14-496-9741
Hose To Boss Straight Adapter

144969741
R50375-67: RNCC: 3 | RNVC: 2
F300 0T 022 3461: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-466-5655
Tube-Hose Fitting Compression Sleeve

144665655
S262-09DG: RNCC: 3 | RNVC: 2
S2770DG: RNCC: 5 | RNVC: 2

16 Nov 1993

4730-14-262-1564
Pipe Flange

142621564
7062DJ1F1F48-4XC18: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-426-7690
Tube Tee

144267690
4730HEING048,3X7,1-17,2X2,3: RNCC: 2 | RNVC: 2

21 Sep 1988

4730-14-576-2706
Pipe Flange

145762706
3035: RNCC: 3 | RNVC: 2

10 Jun 2013

4730-14-245-5287

4730-14-341-7376

4730-14-416-5879
Pipe Flange

144165879
4730GG-DN368: RNCC: 2 | RNVC: 2
MEC10428: RNCC: 3 | RNVC: 2
4730GG-DN368: RNCC: 5 | RNVC: 2

19 Jun 1987

4730-14-453-9879
Sediment Strainer Element

144539879
770100100: RNCC: 3 | RNVC: 2

19 Mar 1992

4730-14-375-5153
Fluid Pressure Line Multiple Connector

143755153
6N08SMKR: RNCC: 3 | RNVC: 2

26 Feb 1982

4730-14-356-1723
Tube To Boss Straight Adapter

143561723
9120131430: RNCC: 3 | RNVC: 2

25 Apr 1979

4730-14-207-7393
Fluid Pressure Line Multiple Connector

142077393
50644: RNCC: 3 | RNVC: 2
395882: RNCC: 5 | RNVC: 2
LB50644: RNCC: 5 | RNVC: 2
0024315123: RNCC: 5 | RNVC: 2
00200481: RNCC: 5 | RNVC: 2
617116: RNCC: 5 | RNVC: 2
DLT031147: RNCC: 5 | RNVC: 2
50644: RNCC: 5 | RNVC: 2
DLT31147: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-429-2164
Fluid Pressure Line Multiple Connector

144292164
9T18SM6KDV01: RNCC: 3 | RNVC: 2

11 Jan 1989

4730-14-400-1765
Tube To Boss Straight Adapter

144001765
CPH84830101: RNCC: 3 | RNVC: 2

24 Apr 1985

4730-14-299-2859
Tube To Boss Straight Adapter

142992859
0000360680: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-512-0192
Tube To Boss Straight Adapter

145120192
0052820: RNCC: 3 | RNVC: 2
93811362: RNCC: 3 | RNVC: 9

2 Feb 1999

4730-14-511-0930
Anchor And Reinforcement Pipe Clamp

145110930
E27852BP032032Y: RNCC: 2 | RNVC: 2

2 Dec 1998

4730-14-496-8076
Quick Disconnect Coupling Half

144968076
AR630: RNCC: 3 | RNVC: 9
F300 0T 022 1363: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-500-6601
Fluid Passage Bolt

145006601
E64201121004: RNCC: 3 | RNVC: 2
F300 0T 024 6792: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-506-0396
Tube To Boss Straight Adapter

145060396
RP1A505982005: RNCC: 3 | RNVC: 2

2 Apr 1998

4730-14-326-0475

4730-14-440-5068
Pipeline Flexible Spacer

144405068
DILATOFLEXKDN40-AR/CNPN16: RNCC: 3 | RNVC: 2

16 Jul 1990

4730-14-350-2147
Partie Mobile

143502147
GSM425-024F28: RNCC: 3 | RNVC: 2
GSM425-24F28: RNCC: 5 | RNVC: 2

14 Jun 1978

4730-14-338-2568
Graisseur Allonge

143382568
5011400-8X125: RNCC: 3 | RNVC: 2
ALG5011400-8X125: RNCC: 5 | RNVC: 9

6 Nov 1976

4730-14-473-1086
Fluid Pressure Line Multiple Connector

144731086
31180410: RNCC: 3 | RNVC: 2
24267402: RNCC: 5 | RNVC: 1
2426740240: RNCC: 5 | RNVC: 2
222-9691: RNCC: 5 | RNVC: 2
24267402: RNCC: 5 | RNVC: 9

7 Dec 1994

4730-14-486-1929
Tube To Boss Straight Adapter

144861929
64288-4: RNCC: 3 | RNVC: 2

5 Mar 1997

4730-14-246-1472
Tube Tee

142461472
47-8: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-505-0339
Tube To Boss Straight Adapter

145050339
1004484110: RNCC: 3 | RNVC: 2
5005430069: RNCC: 5 | RNVC: 2

11 Mar 1998

4730-14-456-6471
Tube Tee

144566471
LN326064F8REP7: RNCC: 3 | RNVC: 2
RAR1542: RNCC: 5 | RNVC: 2

16 Jul 1992

4730-14-511-3445
Hydraulic System Accessories Manifold

145113445
D65717: RNCC: 3 | RNVC: 2

16 Dec 1998

4730-14-220-7194

4730-14-410-9543
Ventil Tube Raccord

144109543
16173732: RNCC: 3 | RNVC: 2
16173732: RNCC: 5 | RNVC: 9

23 Jul 1986

4730-14-291-1949

4730-14-237-6826

4730-14-303-0470
Bride De Blocage

143030470
2-12721: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-386-9161
Diaphragme Pour Bri

143869161
GSM772-001F24: RNCC: 3 | RNVC: 2

24 Aug 1983

4730-14-323-5701
Tube To Boss Straight Adapter

143235701
001496282P: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-462-0183
Fluid Flow Restrictor

144620183
D50910R3: RNCC: 3 | RNVC: 2

31 Mar 1993

4730-14-412-6397
Sediment Strainer Element

144126397
TAMIS807DN11/2: RNCC: 3 | RNVC: 2

20 Oct 1986

4730-14-307-6379
Corps Du Doseur

143076379
100004143: RNCC: 3 | RNVC: 2
GI4544: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-310-7858

4730-14-367-7191

4730-14-220-7195

4730-14-414-6603
Racco Embout Filete

144146603
4730HK-EMF21,3X2: RNCC: 2 | RNVC: 2

20 Feb 1987

4730-14-427-3283
Tube Tee

144273283
4730HDING114,3X3,6-42,4X2,6: RNCC: 2 | RNVC: 2

13 Oct 1988

4730-14-449-5545
Tube Union

144495545
RACCORD IMP R1/4 EM S13,5: RNCC: 3 | RNVC: 2
BN329-507: RNCC: 5 | RNVC: 2

26 Aug 1991

4730-14-469-3236
Tube Tee

144693236
BN329512TERED42,4-33,7-2,77: RNCC: 3 | RNVC: 2

20 Apr 1994

4730-14-317-9896
Jeu Demi-Manchons

143179896
L25.311.GB.06: RNCC: 3 | RNVC: 2
L25-311GB06: RNCC: 5 | RNVC: 2
L25GB311-06: RNCC: 5 | RNVC: 2
L25GB31106: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-395-9128
Raccord

143959128
3531-122: RNCC: 3 | RNVC: 9
MUL3531-122: RNCC: 5 | RNVC: 9

23 Nov 1984

4730-14-407-6960
Pipeline Flexible Spacer

144076960
NO PRIMARY REF14-407-6960: RNCC: 3 | RNVC: 2
0329-2702-915-13: RNCC: 5 | RNVC: 9

27 Feb 1986

4730-14-447-5372
Lubricant Pressure Relief Fitting

144475372
SPI4-64770: RNCC: 3 | RNVC: 2

28 May 1991

4730-14-398-5856
Tube Tee

143985856
GSM164-053F2: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-389-2379
Tube To Boss Straight Adapter

143892379
BSC8PA106-0009: RNCC: 3 | RNVC: 2
85-692-3851: RNCC: 6 | RNVC: 9

29 Nov 1983

4730-14-495-4451
Hose Connector Sleeve

144954451
0190 04 10: RNCC: 3 | RNVC: 2
Q35432-10: RNCC: 5 | RNVC: 2
F300 0T 019 2723: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-412-3314
Quick Disconnect Coupling Half

144123314
RBE06-1810/IA: RNCC: 3 | RNVC: 2
RBE06-1810IA: RNCC: 5 | RNVC: 2

8 Oct 1986

4730-14-501-4672
Tube Tee

145014672
NO PRIMARY REF14-501-4672: RNCC: 3 | RNVC: 2
NNP4730844556369: RNCC: 5 | RNVC: 9

29 Oct 1997

4730-14-268-0586
Pipe Flange

142680586
NO PRIMARY REF14-268-0586: RNCC: 3 | RNVC: 2
4T03010369: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-267-6965
Couplor Aro

142676965
6324REP1-3-4-5-7: RNCC: 3 | RNVC: 2
DLT036665: RNCC: 5 | RNVC: 2
DLT036665: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-314-1608
Tube To Boss Straight Adapter

143141608
UMB25G3-4: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-573-4247
Branched Tubing Connector

145734247
P1-0272-A: RNCC: 3 | RNVC: 2

11 Oct 2012

4730-14-338-0856
Tube Coupling Assembly

143380856
0-3951S20X20X16A: RNCC: 3 | RNVC: 2
0-3951S20X20X16A: RNCC: 5 | RNVC: 9
85-688-9449: RNCC: 6 | RNVC: 9
85-688-9612: RNCC: 6 | RNVC: 9

6 Nov 1976

4730-14-238-4140
Tube Tee

142384140
1TR8-10-8: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-274-6949

4730-14-271-0568
Raccord Haute Press

142710568
9580: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-558-8647
Fluid Pressure Line Multiple Connector

145588647
DH0458 41 63: RNCC: 3 | RNVC: 2

18 Nov 2008

4730-14-452-5602
Pipe Flange

144525602
LN320033F27DN80EXT87: RNCC: 3 | RNVC: 2

13 Jan 1992

4730-14-211-1218
Tube To Boss Straight Adapter

142111218
22303: RNCC: 3 | RNVC: 2

1 Jan 1964

Load More Results