What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 70 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 70 of 185

4730-14-430-8956
Fluid Passage Bolt

144308956
0319740020: RNCC: 3 | RNVC: 2

29 Mar 1989

4730-14-554-6021
Adapter And Flange Assembly

145546021
0390137300: RNCC: 3 | RNVC: 2

24 Jul 2007

4730-14-554-0786
Valve Adapter Assembly

145540786
507 804: RNCC: 3 | RNVC: 2
507 804: RNCC: 3 | RNVC: 2

8 Jun 2007

4730-14-533-4748
Return Tube Bend

145334748
05A034: RNCC: 3 | RNVC: 2

5 Feb 2003

4730-14-451-1672
Pipe To Boss Straight Adapter

144511672
1432048: RNCC: 3 | RNVC: 2
1432048: RNCC: 5 | RNVC: 2

6 Nov 1991

4730-14-500-2427
Tube Tee

145002427
81409700: RNCC: 3 | RNVC: 2
10RA14X6X14LNU: RNCC: 5 | RNVC: 2
10RA14X6X14NEL: RNCC: 5 | RNVC: 9
F300 0T 024 2447: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-506-8483
Fluid Pressure Line Multiple Connector

145068483
1513885: RNCC: 3 | RNVC: 2
13885: RNCC: 5 | RNVC: 2

27 May 1998

4730-14-502-7370
Raccord

145027370
3G6927: RNCC: 3 | RNVC: 2

17 Dec 1997

4730-14-562-2416
Pipe To Gas Fitting Straight Adapter

145622416
04DLMR1518Z: RNCC: 3 | RNVC: 2

8 Oct 2009

4730-14-290-7542

4730-14-221-2190

4730-14-283-1094
Bulkhead Hose Connector

142831094
L65DAN9032M21P3: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-522-3419
Return Tube Bend

145223419
36042000500: RNCC: 3 | RNVC: 2

19 Oct 2000

4730-14-222-5062
Tube To Boss Straight Adapter

142225062
328015: RNCC: 3 | RNVC: 2
0554214000: RNCC: 5 | RNVC: 2
3400995: RNCC: 5 | RNVC: 2
35495: RNCC: 5 | RNVC: 2
DBA328015: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-470-2812
Sediment Strainer Element

144702812
BSNGCFF008F11B: RNCC: 3 | RNVC: 2

14 Jun 1994

4730-14-553-1238
Fluid Pressure Line Multiple Connector

145531238
WH12LMKDSOMDCF: RNCC: 3 | RNVC: 2
437213: RNCC: 5 | RNVC: 2
WH12LMKDSOMDCF: RNCC: 5 | RNVC: 9

5 Mar 2007

4730-14-348-0541
Tube To Boss Straight Adapter

143480541
A77853: RNCC: 3 | RNVC: 2

29 Mar 1978

4730-14-530-7603
Pipe To Hose Straight Adapter

145307603
839127040: RNCC: 3 | RNVC: 2

3 Jul 2002

4730-14-563-5883
Swivel Flange To Hose Connector

145635883
5G12FDLORX: RNCC: 3 | RNVC: 2

24 Feb 2010

4730-14-338-6313

4730-14-351-0199
Tube To Boss Straight Adapter

143510199
208690: RNCC: 3 | RNVC: 2
MAF0001003728: RNCC: 6 | RNVC: 9

10 Aug 1978

4730-14-527-0915
Exhaust-Intake Pneumatic Muffler

145270915
19047.518.000: RNCC: 3 | RNVC: 2

2 Oct 2001

4730-14-436-2626
Tube Demi-Bride

144362626
DB2D50: RNCC: 3 | RNVC: 2

12 Dec 1989

4730-14-333-5303
Partie Mobile

143335303
GSM425-007F5REP1: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-461-8078
Jeu Raccords

144618078
1683457082: RNCC: 3 | RNVC: 2

26 Mar 1993

4730-14-229-8263

4730-14-262-1527

4730-14-558-7399
Suction Strainer

145587399
259500: RNCC: 3 | RNVC: 2

29 Oct 2008

4730-14-233-6884

4730-14-270-0135

4730-14-561-8797
Hose Coupling Assembly

145618797
6501BEH112A: RNCC: 3 | RNVC: 2

14 Sep 2009

4730-14-348-4712

4730-14-262-2898

4730-14-569-7011
Sediment Strainer Element

145697011
01002466E20200: RNCC: 3 | RNVC: 2

17 Oct 2011

4730-14-365-3050

4730-14-339-8336

4730-14-281-0012
Tube To Boss Straight Adapter

142810012
32-6-10X100RR: RNCC: 3 | RNVC: 2
32-6-10X100: RNCC: 5 | RNVC: 2
505857: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-452-7528
Tube Tee

144527528
134751: RNCC: 3 | RNVC: 2
91720528: RNCC: 5 | RNVC: 2
LV300-CS16S: RNCC: 5 | RNVC: 9
01-352-9612: RNCC: 6 | RNVC: 9

15 Jan 1992

4730-14-369-7043
Tube-Hose Fitting Compression Sleeve

143697043
4730AB4.6POLYAM-DN25: RNCC: 2 | RNVC: 2
6016379000: RNCC: 3 | RNVC: 2
84242502: RNCC: 5 | RNVC: 2
SYB2941: RNCC: 5 | RNVC: 2
LL023-NS25S: RNCC: 5 | RNVC: 2

17 Apr 1981

4730-14-339-9782
Corps De Raccord

143399782
GSM166-005F33: RNCC: 3 | RNVC: 2
GSM166-05F33: RNCC: 5 | RNVC: 2

18 Jan 1977

4730-14-374-6160
Tube To Boss Straight Adapter

143746160
7380-114: RNCC: 3 | RNVC: 9

30 Jan 1982

4730-14-391-8927
Auto- Raccord Butee

143918927
434-18: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-429-5369
Tube To Boss Straight Adapter

144295369
UMCA44,5X40-49N: RNCC: 3 | RNVC: 2

30 Jan 1989

4730-14-429-5504
Quick Disconnect Coupling Half

144295504
RBE06-7151: RNCC: 3 | RNVC: 2

30 Jan 1989

4730-14-332-3666
Fluid Pressure Line Multiple Connector

143323666
702A30-0619-20: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-306-7561
Diaphragme

143067561
GSM160-002F12REP2: RNCC: 3 | RNVC: 2
411MA502REP1: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-329-9363
Manchette 3 Voies

143299363
32440-021: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-449-5502
Tube Union

144495502
RACCORD IMP R1/2 BB L21,3: RNCC: 3 | RNVC: 2
BN329-507: RNCC: 5 | RNVC: 2

26 Aug 1991

4730-14-376-4493
Tube-Hose Fitting Compression Sleeve

143764493
R95403D4D: RNCC: 2 | RNVC: 2
R94403D4D: RNCC: 3 | RNVC: 2
99079334: RNCC: 5 | RNVC: 2
R94403D4D: RNCC: 5 | RNVC: 9
R95403D4D: RNCC: 5 | RNVC: 9

28 Apr 1982

4730-14-552-9962
Fluid Pressure Line Multiple Connector

145529962
0028221: RNCC: 3 | RNVC: 2

22 Feb 2007

4730-14-508-1411
Tube Coupling

145081411
204828: RNCC: 3 | RNVC: 2

26 Aug 1998

4730-14-378-6500
Tube To Boss Straight Adapter

143786500
4730AJ4.4DN6EQUIPE: RNCC: 2 | RNVC: 2
8905061366: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-494-5517
Tube To Boss Straight Adapter

144945517
643 449 251: RNCC: 3 | RNVC: 2
F300 0T 017 4696: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-565-4941
Tube Elbow

145654941
8009 25 28: RNCC: 3 | RNVC: 2
8009 25 28: RNCC: 5 | RNVC: 2

25 Aug 2010

4730-14-362-0412

4730-14-323-2984
Separateur Huile Ea

143232984
R35217SM: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-369-8732

4730-14-365-3070

4730-14-327-6200
Bulkhead Hose Connector

143276200
0264751260: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-547-1820
Tube Tee

145471820
88409501: RNCC: 3 | RNVC: 2
5005430302: RNCC: 5 | RNVC: 2

3 Oct 2005

4730-14-206-1751

4730-14-490-1005
Racc Embout Epaule

144901005
SIMMAA5000100ADN6: RNCC: 3 | RNVC: 2

11 Sep 1997

4730-14-273-5309

4730-14-272-5572

4730-14-575-7824
Flange To Tube Elbow

145757824
M2811351000100: RNCC: 3 | RNVC: 2

30 Apr 2013

4730-14-240-2903
Ecrou Porte Banjo

142402903
153212: RNCC: 3 | RNVC: 2
89301766: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-402-6798

4730-14-204-8856

4730-14-304-7286

4730-14-576-0578
Flange To Tube Elbow

145760578
M2821329900000: RNCC: 3 | RNVC: 2

28 May 2013

4730-14-556-8497
Special Nipple

145568497
82365841000: RNCC: 3 | RNVC: 2

15 Apr 2008

4730-14-537-0343
Tube Tee

145370343
1204514: RNCC: 3 | RNVC: 2

24 Sep 2003

4730-14-558-5225
Tube Elbow

145585225
8009 10 17: RNCC: 3 | RNVC: 2

13 Oct 2008

4730-14-257-4816

4730-14-252-2588

4730-14-562-7357
Tube Coupling

145627357
7700016197: RNCC: 3 | RNVC: 2

18 Nov 2009

4730-14-557-4691
Blind Pipe Flange

145574691
057.050.140: RNCC: 3 | RNVC: 2

12 Jun 2008

4730-14-463-9498
Flange To Boss Straight Adapter

144639498
851-490-151-0: RNCC: 3 | RNVC: 2

7 Jul 1993

4730-14-496-9890
Fluid Pressure Line Multiple Connector

144969890
NO PRIMARY REF14-496-9890: RNCC: 3 | RNVC: 2
50-5014K: RNCC: 5 | RNVC: 9
F300 0T 022 3971: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-349-6815

4730-14-350-7008

4730-14-230-5376
Raccord A Bride Spe

142305376
0067011110: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-041-1905

4730-14-273-5215
Pipe Flange

142735215
7062TB1F1-108-3UA9NFEM: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-287-0113
Pipe Flange

142870113
6101-1422: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-364-4255
Fluid Passage Bolt

143644255
283493: RNCC: 3 | RNVC: 2
3295-08-23-03: RNCC: 5 | RNVC: 2

7 Aug 1980

4730-14-455-3603
Tube Tee

144553603
130-10: RNCC: 3 | RNVC: 2
5045007: RNCC: 5 | RNVC: 9

21 May 1992

4730-14-378-6820
Sediment Strainer Element

143786820
BM115950: RNCC: 3 | RNVC: 2
85-691-4575: RNCC: 6 | RNVC: 9

11 Aug 1982

4730-14-377-1727
Tube Tee

143771727
TMF12-12-17C08-13K: RNCC: 3 | RNVC: 2
0946710074: RNCC: 5 | RNVC: 2
FD3050: RNCC: 5 | RNVC: 2
TMF12-12X17C08-13K: RNCC: 5 | RNVC: 2
946710074: RNCC: 5 | RNVC: 9
0946710074: RNCC: 5 | RNVC: 9

17 May 1982

4730-14-390-8258
Flexible Tube Coupling Assembly

143908258
LR25X16.0.2: RNCC: 3 | RNVC: 2
LR25-16-0-2: RNCC: 5 | RNVC: 2
LR25X16-02: RNCC: 5 | RNVC: 2

1 Mar 1984

4730-14-339-9021
Tube Coupling Assembly

143399021
0-3951S25X32X32A: RNCC: 3 | RNVC: 2
0-3951S25X32X32A: RNCC: 5 | RNVC: 9
85-688-9611: RNCC: 6 | RNVC: 9

18 Jan 1977

4730-14-500-6321
Tube To Boss Straight Adapter

145006321
XGE16-S-M18X1.5A3C: RNCC: 3 | RNVC: 2
XGE16SM18X1-5A3C: RNCC: 3 | RNVC: 2
F300 0T 024 6507: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-387-2703
Bulkhead Hose Connector

143872703
136-81-22100: RNCC: 3 | RNVC: 9

15 Sep 1983

4730-14-268-8860
Tube To Boss Straight Adapter

142688860
631X4201: RNCC: 3 | RNVC: 2
U1-4A631X4201: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-390-5039
Tube Tee

143905039
NO PRIMARY REF14-390-5039: RNCC: 3 | RNVC: 2
JBTXS20: RNCC: 5 | RNVC: 2

26 Jan 1984

4730-14-415-1925
Tube To Boss Straight Adapter

144151925
Q1-52-15-18X150: RNCC: 3 | RNVC: 2

17 Apr 1987

4730-14-342-8889
Bloc Raccordement

143428889
A0191-013: RNCC: 3 | RNVC: 2

16 May 1977

4730-14-418-6388
Tube To Boss Straight Adapter

144186388
272HP1: RNCC: 3 | RNVC: 2

8 Sep 1987

4730-14-339-1543
Tube To Boss Straight Adapter

143391543
1DM20-27X150: RNCC: 3 | RNVC: 2

17 Dec 1976

4730-14-365-9038
Tube To Boss Straight Adapter

143659038
411199: RNCC: 3 | RNVC: 2

4 Nov 1980

4730-14-410-6958
Quick-Disconnect Nipple

144106958
5172260500: RNCC: 3 | RNVC: 2
3507620000: RNCC: 5 | RNVC: 9
722605: RNCC: 5 | RNVC: 9

9 Jul 1986

4730-14-381-4288
Tube To Boss Straight Adapter

143814288
190810: RNCC: 3 | RNVC: 9

25 Jan 1983

4730-14-463-2333
Fluid Pressure Line Multiple Connector

144632333
LN326063F11: RNCC: 3 | RNVC: 2

2 Jun 1993

4730-14-410-9814
Tube To Boss Straight Adapter

144109814
840138766: RNCC: 3 | RNVC: 2

23 Jul 1986

4730-14-545-0643
Tube To Boss Straight Adapter

145450643
19215232: RNCC: 3 | RNVC: 2
01051617: RNCC: 3 | RNVC: 2

16 Mar 2005

4730-14-541-0597
Tube Coupling Inverted Nut

145410597
5001862971: RNCC: 3 | RNVC: 2

12 May 2004

4730-14-506-8514
Return Tube Bend

145068514
B46176P: RNCC: 3 | RNVC: 2

27 May 1998

4730-14-559-5556
Fluid-Emulsion Spray Nozzle

145595556
3350T1: RNCC: 3 | RNVC: 2
38214: RNCC: 5 | RNVC: 2

23 Jan 2009

4730-14-557-7456
Tube To Hose Elbow

145577456
PE65411DD12: RNCC: 3 | RNVC: 2

8 Jul 2008

4730-14-321-1174

4730-14-214-1702

4730-14-246-9764
Fluid Pressure Line Multiple Connector

142469764
327854109: RNCC: 3 | RNVC: 9
327854109: RNCC: 5 | RNVC: 9
32785B: RNCC: 5 | RNVC: 9
062075568: RNCC: 5 | RNVC: 9
75568: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-516-0535
Fluid Flow Restrictor

145160535
SIFLSMLH10400F56A: RNCC: 3 | RNVC: 2

8 Sep 1999

4730-14-032-3082
Tube To Boss Straight Adapter

140323082
4730AJ4.3DN20EQUIPE: RNCC: 2 | RNVC: 2
8401202166: RNCC: 3 | RNVC: 2

20 Jul 1982

4730-14-325-9073
Pipe Flange

143259073
AS34TV106REP24: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-442-9364
Tube To Boss Straight Adapter

144429364
PZCF149: RNCC: 3 | RNVC: 2

7 Nov 1990

4730-14-250-0440
Tube Coupling Inverted Nut

142500440
E29601E6D: RNCC: 2 | RNVC: 2
0703220200: RNCC: 3 | RNVC: 2
386: RNCC: 3 | RNVC: 2
222611: RNCC: 5 | RNVC: 2
0024385010: RNCC: 5 | RNVC: 2
9202077: RNCC: 5 | RNVC: 2

1 Jan 1968

4730-14-444-9146
Quick Disconnect Coupling Assembly

144449146
N01021983: RNCC: 3 | RNVC: 2

28 Jan 1991

4730-14-468-3669
Quick Disconnect Coupling Half

144683669
N01013174S: RNCC: 3 | RNVC: 2
1057905E00: RNCC: 5 | RNVC: 2

23 Feb 1994

4730-14-559-8478
Pipe To Gas Fitting Straight Adapter

145598478
1AQ42136: RNCC: 3 | RNVC: 2

24 Feb 2009

4730-14-278-8105

4730-14-218-3998

4730-14-575-8915
Tube Tee

145758915
T06LCF: RNCC: 3 | RNVC: 2
427367: RNCC: 5 | RNVC: 2

15 May 2013

4730-14-338-1509

4730-14-330-6526

4730-14-577-0762
Boss Outlet

145770762
0301040130: RNCC: 3 | RNVC: 2

5 Aug 2013

4730-14-353-4365

4730-14-546-3745
Tube Union

145463745
5010248140: RNCC: 3 | RNVC: 2

28 Jun 2005

4730-14-249-1341
Bouchons Filetes Gr

142491341
5172121000: RNCC: 3 | RNVC: 2
460412: RNCC: 5 | RNVC: 2
5146041200: RNCC: 5 | RNVC: 2
721210: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-499-3487
Union

144993487
5005030923: RNCC: 3 | RNVC: 2
81121400: RNCC: 3 | RNVC: 2
F300 0T 021 7089: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-572-3554
Pipe Flange

145723554
M2821303900000: RNCC: 3 | RNVC: 2

27 Jun 2012

4730-14-575-4710
Tube Elbow

145754710
19390B: RNCC: 3 | RNVC: 2

9 Apr 2013

4730-14-434-6952
Adaptateur Bride

144346952
BN329515C2DN150INOX: RNCC: 3 | RNVC: 2

2 Oct 1989

4730-14-208-7822

4730-14-248-3454

4730-14-214-1700

4730-14-406-7327
Sediment Strainer Element

144067327
47817-2-500: RNCC: 3 | RNVC: 9

8 Jan 1986

4730-14-545-0558
Tube Tee

145450558
19210266: RNCC: 3 | RNVC: 2
116990.00.26: RNCC: 3 | RNVC: 2

16 Mar 2005

4730-14-555-0552
Hose To Gas Fitting Straight Adapter

145550552
M4ZS560D2141: RNCC: 3 | RNVC: 2

25 Sep 2007

4730-14-516-8569
Tube To Boss Straight Adapter

145168569
101162941590: RNCC: 3 | RNVC: 2

20 Oct 1999

4730-14-573-3254
Tube To Hose Straight Adapter

145733254
222EB069: RNCC: 3 | RNVC: 2
A430400100384: RNCC: 5 | RNVC: 2

4 Oct 2012

4730-14-554-6457
Hose Splicing Set

145546457
31290: RNCC: 3 | RNVC: 2
CAE01873: RNCC: 5 | RNVC: 2

31 Jul 2007

4730-14-365-9602

4730-14-228-9210
Fluid Pressure Line Multiple Connector

142289210
0201399: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-458-8581
Tube To Boss Straight Adapter

144588581
50000: RNCC: 3 | RNVC: 2

5 Nov 1992

4730-14-359-9231
Tube To Boss Straight Adapter

143599231
4817A3REP20: RNCC: 3 | RNVC: 2

15 Oct 1979

4730-14-329-5608
Fluid Passage Bolt

143295608
VDP2921: RNCC: 3 | RNVC: 2
VDPM02065: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-460-4086
Quick Disconnect Coupling Half

144604086
N00110693: RNCC: 3 | RNVC: 2
S00115493: RNCC: 5 | RNVC: 2

25 Jan 1993

4730-14-472-7935
Quick Disconnect Coupling Half

144727935
118E7450BZ: RNCC: 3 | RNVC: 2

9 Nov 1994

4730-14-367-6239
Fluid Pressure Line Multiple Connector

143676239
A16398: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-564-4671
Tube Tee

145644671
8935017834: RNCC: 3 | RNVC: 2
A231004000153: RNCC: 5 | RNVC: 2

30 Apr 2010

4730-14-432-8869
Fluid Pressure Line Multiple Connector

144328869
M4Z7101943620: RNCC: 3 | RNVC: 2

28 Jun 1989

4730-14-358-5995
Bulkhead Hose Connector

143585995
413192: RNCC: 3 | RNVC: 2

7 Sep 1979

4730-14-223-8715

4730-14-296-2941
Pipe Flange

142962941
0257990020: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-428-0804
Tube To Boss Straight Adapter

144280804
159067: RNCC: 3 | RNVC: 2

29 Nov 1988

4730-14-544-8586
Hydraulic System Accessories Manifold

145448586
5013060: RNCC: 3 | RNVC: 2

1 Mar 2005

4730-14-325-6794
Bulkhead Hose Connector

143256794
0000364810: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-494-3380
Tube To Boss Straight Adapter

144943380
5000296505: RNCC: 3 | RNVC: 2
F300 0T 017 0402: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-494-5453
Tube To Boss Straight Adapter

144945453
641 140 06: RNCC: 3 | RNVC: 2
F300 0T 017 4630: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-503-2004
Bulkhead Hose Connector

145032004
RA1M533303180: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-455-9979
Tube To Boss Straight Adapter

144559979
103091004801: RNCC: 3 | RNVC: 2
103091004801: RNCC: 5 | RNVC: 2

11 Jun 1992

4730-14-389-8212
Tube To Boss Straight Adapter

143898212
84212027: RNCC: 3 | RNVC: 2

20 Dec 1983

4730-14-320-1485

4730-14-409-9392
Hose To Boss Straight Adapter

144099392
1559-67: RNCC: 3 | RNVC: 2
9350235280: RNCC: 3 | RNVC: 2
9350235280: RNCC: 5 | RNVC: 2
9350235280: RNCC: 5 | RNVC: 2
0009772: RNCC: 5 | RNVC: 2
F300 0T 024 6253: RNCC: 6 | RNVC: 9

4 Jun 1986

4730-14-369-1811
Tube To Boss Straight Adapter

143691811
160-632332-01: RNCC: 3 | RNVC: 2

17 Apr 1981

4730-14-468-4787
Flange To Tube Elbow

144684787
A1-53420: RNCC: 3 | RNVC: 2

3 Mar 1994

4730-14-317-1871
Tube Tee

143171871
F781-004: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-390-0069
Tube Tee

143900069
DHS613-647-79: RNCC: 3 | RNVC: 2

26 Jan 1984

4730-14-315-7655
Demi-Corps Presse-E

143157655
773-425-034DET1: RNCC: 3 | RNVC: 2
773-425-034DET1: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-219-0790
Col De Cygne Pour E

142190790
536-441-090: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-404-4055
Tube To Boss Straight Adapter

144044055
243GCU32-1 1/4: RNCC: 3 | RNVC: 2

30 Oct 1985

4730-14-249-6758
Chapeau De Protecti

142496758
2-02523: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-308-5174
Pipe Flange

143085174
A1-84808: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-391-6501
Quick Disconnect Coupling Half

143916501
RBE08-6102-1-5: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-472-0334
Raccord Flexible

144720334
MAT166-3008VERSIONC: RNCC: 3 | RNVC: 2

5 Oct 1994

4730-14-291-0985
Tube Coupling

142910985
7-14-16X14-16: RNCC: 3 | RNVC: 2
0946687018: RNCC: 5 | RNVC: 2
946687018: RNCC: 5 | RNVC: 9
0946687018: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-434-9616
Flexible Tube Coupling Assembly

144349616
5-34765-00-2: RNCC: 3 | RNVC: 2

11 Oct 1989

4730-14-310-3016
Tube-Hose Fitting Compression Sleeve

143103016
801MA022REP19: RNCC: 3 | RNVC: 9

1 Jan 1974

4730-14-518-3312
Lubrication Fitting

145183312
AGRDX000001: RNCC: 3 | RNVC: 9

2 Feb 2000

4730-14-377-5245
Quick Disconnect Coupling Assembly

143775245
9001CTS500131: RNCC: 3 | RNVC: 2

17 May 1982

4730-14-042-6285
Tube To Boss Straight Adapter

140426285
50090175: RNCC: 3 | RNVC: 2
50090175: RNCC: 5 | RNVC: 9

16 Oct 1978

4730-14-516-4006
Tube To Boss Straight Adapter

145164006
A013516 12 12: RNCC: 3 | RNVC: 2

22 Sep 1999

4730-14-514-3770
Tube Tee

145143770
N102866A: RNCC: 3 | RNVC: 2

19 May 1999

4730-14-290-1363
Sediment Strainer Element

142901363
401MA0037REP5: RNCC: 3 | RNVC: 2
401MA037REP5: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-356-1962
Sediment Strainer Element

143561962
5171003300: RNCC: 3 | RNVC: 2
710033: RNCC: 5 | RNVC: 2

25 Apr 1979

4730-14-547-5854
Tube To Boss Straight Adapter

145475854
ZH4532: RNCC: 3 | RNVC: 2

17 Oct 2005

4730-14-335-1370
Pipeline Flexible Spacer

143351370
I131NTH40PN16: RNCC: 2 | RNVC: 2
DILNTH40PN16: RNCC: 3 | RNVC: 2
IT131NTH40: RNCC: 5 | RNVC: 2
DILNTH40PN16: RNCC: 5 | RNVC: 9

3 Jun 1976

4730-14-456-0549
Tube To Boss Straight Adapter

144560549
8120151799: RNCC: 3 | RNVC: 2
99648201517: RNCC: 5 | RNVC: 2

17 Jun 1992

4730-14-493-3043
Fluid Pressure Line Multiple Connector

144933043
WH22LR0MDA3C: RNCC: 3 | RNVC: 2
F300 0T 012 1606: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-505-6961
Hose To Boss Straight Adapter

145056961
A49836: RNCC: 3 | RNVC: 2

26 Mar 1998

4730-14-351-0058
Tube To Boss Straight Adapter

143510058
213156: RNCC: 3 | RNVC: 2
MAF0001003676: RNCC: 6 | RNVC: 9

10 Aug 1978

4730-14-505-9405
Fluid Passage Bolt

145059405
E25001305001: RNCC: 3 | RNVC: 2

30 Mar 1998

4730-14-444-8374
Tube Tee

144448374
S8MB8M10: RNCC: 3 | RNVC: 2
S8MB8M10X1: RNCC: 5 | RNVC: 2
91632282: RNCC: 5 | RNVC: 2
5000785490: RNCC: 5 | RNVC: 2

23 Jan 1991

4730-14-548-8778
Tube Coupling Assembly

145488778
0298737650: RNCC: 3 | RNVC: 2

21 Feb 2006

4730-14-456-6539
Tube Tee

144566539
TK10S: RNCC: 3 | RNVC: 2

17 Jul 1992

4730-14-507-0538
Tube Tee

145070538
PE66772TE060808: RNCC: 3 | RNVC: 2

8 Jun 1998

4730-14-326-8603
Tube Coupling Assembly

143268603
3711PS25A: RNCC: 3 | RNVC: 2
3711PS25A: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-552-3878
Flexible Tube Coupling Assembly

145523878
711B1010Z3: RNCC: 3 | RNVC: 2

18 Dec 2006

4730-14-538-4495
Tube Coupling Assembly

145384495
NGM0010037380391: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-442-4148
Hose To Boss Straight Adapter

144424148
3972: RNCC: 3 | RNVC: 2
03972: RNCC: 5 | RNVC: 2

16 Oct 1990

4730-14-340-6367

4730-14-241-3276
Bouchon Equipe

142413276
GA50319: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-576-3756
Tube Elbow

145763756
10620324: RNCC: 3 | RNVC: 1

14 Jun 2013

4730-14-561-8029
Tube Tee

145618029
JNPMB8: RNCC: 3 | RNVC: 2
JNPMB8: RNCC: 5 | RNVC: 9

8 Sep 2009

4730-14-214-1948

4730-14-356-6851

4730-14-353-3311

4730-14-223-1294
Purgeur Air

142231294
3417: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-295-1286
Palpeur

142951286
81626A: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-329-2540

4730-14-563-5887
Swivel Flange To Hose Elbow

145635887
5G12FDLORX90: RNCC: 3 | RNVC: 2

24 Feb 2010

4730-14-261-7895
Passage De Cloison

142617895
PCL25: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-467-3600
Tuyau Collier

4730-14-451-1227
Tubag Raccord Droit

4730-14-383-2251
Contre-Bride

143832251
E64-35-3200-122BF11-22ETF12-22D-: RNCC: 3 | RNVC: 1

17 Mar 1983

4730-14-457-1287
Tube Union

144571287
METALGRIP 60.3 EPDM 16 BAR INOX: RNCC: 3 | RNVC: 2
1800601: RNCC: 5 | RNVC: 2
1800601: RNCC: 5 | RNVC: 2
91620032: RNCC: 5 | RNVC: 2
91620032: RNCC: 5 | RNVC: 2

11 Aug 1992

4730-14-571-7376
Water Purification Feeder Injector

145717376
3050823107F: RNCC: 3 | RNVC: 2
1B 4X8 TYPE P: RNCC: 5 | RNVC: 2
AU790B: RNCC: 5 | RNVC: 2

26 Apr 2012

4730-14-561-9883
Hose Clamp

145619883
DLT087253: RNCC: 3 | RNVC: 2
FS0006060: RNCC: 6 | RNVC: 9

22 Sep 2009

4730-14-410-9877
Tube Tee

144109877
BN324-554F5-457: RNCC: 3 | RNVC: 2

23 Jul 1986

4730-14-213-8292
Manchon De Renforce

142138292
MS382-12: RNCC: 3 | RNVC: 2
MS382-12: RNCC: 5 | RNVC: 2
MS382-12: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-449-4050
Tube-Pipe Fitting Kit

144494050
2402OUT3: RNCC: 3 | RNVC: 2
85-694-2701: RNCC: 6 | RNVC: 9

7 Aug 1991

4730-14-344-4680
Fluid Pressure Line Multiple Connector

143444680
EA1M712-021: RNCC: 3 | RNVC: 2

10 Aug 1977

4730-14-509-1798
Tube To Boss Straight Adapter

145091798
KQU08-10: RNCC: 3 | RNVC: 2
ND1655: RNCC: 5 | RNVC: 9

21 Oct 1998

4730-14-417-7874
Tube Tee

144177874
ST2069DN80-40Z2CND17-12-02: RNCC: 2 | RNVC: 2

22 Jul 1987

4730-14-494-7013
Tube To Boss Straight Adapter

144947013
NO PRIMARY REF14-494-7013: RNCC: 3 | RNVC: 2
017247: RNCC: 5 | RNVC: 9
F300 0T 017 8015: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-389-5100
Tube To Boss Straight Adapter

143895100
365A72-1295-20: RNCC: 3 | RNVC: 2

20 Dec 1983

4730-14-302-7785
Tube To Boss Straight Adapter

143027785
NO PRIMARY REF14-302-7785: RNCC: 3 | RNVC: 2
41467: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-538-0123
Quick-Disconnect Nipple

145380123
5695-42-12B: RNCC: 3 | RNVC: 2

9 Dec 2003

4730-14-274-6598
Tube-Hose Fitting Compression Sleeve

142746598
7062BA1BT2-20UE10R1: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-324-2238
Tube Tee

143242238
RUAN7523-88-9: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-367-7886

4730-14-365-7739

4730-14-403-6801
Bulkhead Hose Connector

144036801
79101986: RNCC: 3 | RNVC: 2
79101986: RNCC: 5 | RNVC: 9

21 Aug 1985

4730-14-382-7085
Tube To Boss Straight Adapter

143827085
9936300400: RNCC: 3 | RNVC: 2

17 Feb 1983

4730-14-290-2051
Lubricant Pressure Relief Fitting

142902051
0260620890: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-242-5105
Tube Fitting Clinch Sleeve

142425105
205-38: RNCC: 3 | RNVC: 2
DA38N: RNCC: 3 | RNVC: 2
1A38: RNCC: 3 | RNVC: 2
BE38: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-208-1833
Fluid Pressure Line Multiple Connector

142081833
351009: RNCC: 3 | RNVC: 2
2949: RNCC: 5 | RNVC: 2
3153500: RNCC: 5 | RNVC: 2
0812001200: RNCC: 5 | RNVC: 2
6233399: RNCC: 5 | RNVC: 2
DBA351009: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-494-5482
Tube To Boss Straight Adapter

144945482
643 017 06: RNCC: 3 | RNVC: 2
F300 0T 017 4660: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-324-9347
Tube To Boss Straight Adapter

143249347
001461282P: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-239-9974
Te De Reduction Ens

142399974
5TR20X10X20NN: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-576-1828
Flange To Flange Straight Adapter

145761828
M2821319620600: RNCC: 3 | RNVC: 2

4 Jun 2013

4730-14-243-5773

4730-14-295-4080

4730-14-497-2715
Quick Disconnect Coupling Half

144972715
390202-8: RNCC: 3 | RNVC: 2
F300 0T 022 9247: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-481-0949
Tube-Hose Fitting Compression Sleeve

144810949
743 T 10: RNCC: 3 | RNVC: 2
74743T10: RNCC: 5 | RNVC: 2
743T10: RNCC: 5 | RNVC: 2

18 Apr 1996

4730-14-514-9925
Tube To Boss Swivel Joint

145149925
6 AGF 14 KD: RNCC: 3 | RNVC: 2
6AGF14KD: RNCC: 5 | RNVC: 2

25 Jun 1999

4730-14-231-5747
Tube Tee

142315747
130-2 1-4: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-307-0224
Tube To Boss Straight Adapter

143070224
113-8: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-572-3975
Pipe To Tube Straight Adapter

145723975
HLA6513: RNCC: 3 | RNVC: 2

3 Jul 2012

4730-14-311-5846

4730-14-499-3475
Fluid Pressure Line Multiple Connector

144993475
88101000: RNCC: 3 | RNVC: 2
5010013740: RNCC: 3 | RNVC: 2
F300 0T 021 7076: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-553-6110
Tube Tee

145536110
930 135 050: RNCC: 3 | RNVC: 2
TA15L: RNCC: 3 | RNVC: 2

24 Apr 2007

4730-14-557-1118
Flange To Hose Straight Adapter

145571118
7420928930: RNCC: 3 | RNVC: 2

7 May 2008

4730-14-562-7046
Tube Elbow

145627046
1002.10025: RNCC: 3 | RNVC: 9

16 Nov 2009

4730-14-317-8067
Tube Tee

143178067
300589: RNCC: 3 | RNVC: 2

19 Apr 2000

4730-14-344-5103

4730-14-554-2257
Fluid Pressure Line Multiple Connector

145542257
358 156: RNCC: 3 | RNVC: 2
358 156: RNCC: 3 | RNVC: 2

13 Jun 2007

4730-14-457-7399
Bulkhead Hose Connector

144577399
191476: RNCC: 3 | RNVC: 2

17 Sep 1992

4730-14-336-4641
Tube To Boss Straight Adapter

143364641
0000150125: RNCC: 3 | RNVC: 2
0000150125: RNCC: 5 | RNVC: 9
150125: RNCC: 5 | RNVC: 9

14 Aug 1976

4730-14-459-4512
Flange To Hose Straight Adapter

144594512
PM1A759499010A1: RNCC: 3 | RNVC: 2
PM1A759499010A1: RNCC: 5 | RNVC: 2

1 Dec 1992

4730-14-541-1351
Fluid Passage Bolt

145411351
3218R035: RNCC: 3 | RNVC: 2
3218R035: RNCC: 3 | RNVC: 2

14 May 2004

4730-14-282-2460
Tube To Boss Straight Adapter

142822460
10379: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-256-7022
Pipe Flange

142567022
6832: RNCC: 3 | RNVC: 2
00683277: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-369-6239
Tube Coupling

143696239
1464-40-05: RNCC: 3 | RNVC: 2

17 Apr 1981

4730-14-297-5299

4730-14-287-8930
Tube Tee

142878930
TMCFA12-17X14X14-150F: RNCC: 3 | RNVC: 2
062712230: RNCC: 5 | RNVC: 9
712230: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-387-8884
Tube Tee

143878884
788.B.08.12.12T: RNCC: 3 | RNVC: 2
788 B 08 12 12T: RNCC: 5 | RNVC: 2
788B08 12 12T: RNCC: 5 | RNVC: 2
788B08-12-12T: RNCC: 5 | RNVC: 2
788B081212T: RNCC: 5 | RNVC: 2
74788B081212T: RNCC: 5 | RNVC: 2

12 Oct 1983

4730-14-333-5315
Contre-Clips

143335315
79450618: RNCC: 3 | RNVC: 2
79450-618: RNCC: 5 | RNVC: 9
79450618: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-415-9799
Tube Coupling

144159799
20651-4-2: RNCC: 3 | RNVC: 2
20651-4-2: RNCC: 3 | RNVC: 2
91692021: RNCC: 5 | RNVC: 2
85-692-7782: RNCC: 6 | RNVC: 9

1 Jun 1987

4730-14-484-3252
Fluid Pressure Line Multiple Connector

144843252
6AR810M16KDV: RNCC: 3 | RNVC: 2
613-988-537-0: RNCC: 5 | RNVC: 2

7 Nov 1996

4730-14-472-0743
Tube To Boss Straight Adapter

144720743
4A10-16X150NU: RNCC: 3 | RNVC: 2
204104161NU: RNCC: 5 | RNVC: 2

5 Oct 1994

4730-14-449-5387
Tube Union

144495387
UNION MALE G1/4A 2353S13,5: RNCC: 3 | RNVC: 2
BN329-507: RNCC: 5 | RNVC: 2

26 Aug 1991

4730-14-305-9777

4730-14-333-8744

4730-14-247-3699
Bouchon Special

142473699
A55653: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-414-6477
Pipeline Flexible Spacer

144146477
DLT604343: RNCC: 3 | RNVC: 2

20 Feb 1987

4730-14-367-7060

4730-14-549-6333
Tube Union

145496333
PE66001E10: RNCC: 3 | RNVC: 2

24 Apr 2006

4730-14-562-9022
Quick Disconnect Coupling Half

145629022
455133-50: RNCC: 3 | RNVC: 2
445923: RNCC: 5 | RNVC: 2

3 Dec 2009

4730-14-559-9028
Hose Clamp

145599028
31805000223: RNCC: 3 | RNVC: 2

3 Mar 2009

4730-14-328-6349

4730-14-272-5344

4730-14-420-5974
Tube Union

144205974
362304: RNCC: 3 | RNVC: 2
AS06020000C59U0: RNCC: 5 | RNVC: 2

16 Dec 1987

4730-14-262-5741
Pipe De Purgeur

142625741
15945: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-365-9423

4730-14-275-8297

4730-14-354-9311

4730-14-575-4143
Water Feeder Manifold

145754143
391028: RNCC: 3 | RNVC: 2

4 Apr 2013

4730-14-346-9521
Flasque Dentraineme

143469521
A77162: RNCC: 3 | RNVC: 2

19 Jan 1978

4730-14-433-6001
Quick Disconnect Coupling Half

144336001
5623-6-6: RNCC: 3 | RNVC: 2
91597465: RNCC: 5 | RNVC: 2

2 Aug 1989

4730-14-573-9671
Pipe To Gas Fitting Straight Adapter

145739671
B051879: RNCC: 3 | RNVC: 2
M512GPD238RLREP01: RNCC: 5 | RNVC: 2
A2552PD238-1: RNCC: 5 | RNVC: 2

26 Nov 2012

4730-14-262-3016
Raccord Special

142623016
A59442: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-277-3643
Fluid Passage Bolt

142773643
0056500130: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-351-1185
Fluid Pressure Line Multiple Connector

143511185
6127041-921: RNCC: 3 | RNVC: 2

10 Aug 1978

4730-14-495-6962
Tube To Boss Straight Adapter

144956962
63010104: RNCC: 3 | RNVC: 2
203024X07006A: RNCC: 5 | RNVC: 9
306071020004A: RNCC: 5 | RNVC: 9
F300 0T 019 6549: RNCC: 6 | RNVC: 9
F300 0T 019 7298: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-476-5250
Quick Disconnect Coupling Half

144765250
008955010P: RNCC: 3 | RNVC: 2

19 Jun 1995

4730-14-409-4601
Hose To Gas Fitting Straight Adapter

144094601
608832: RNCC: 3 | RNVC: 2

28 May 1986

4730-14-529-7593
Reducing Tube Coupling Nut

145297593
MEASTRED02000: RNCC: 3 | RNVC: 2

10 Apr 2002

4730-14-528-3670
Valve Adapter Assembly

145283670
10RBD40-1SD1NOD: RNCC: 3 | RNVC: 2
10RBD40-1SD1NOD: RNCC: 5 | RNVC: 2

23 Jan 2002

4730-14-487-5450
Bulkhead Hose Connector

144875450
RA1M521404160: RNCC: 3 | RNVC: 2

10 Apr 1997

4730-14-482-0124
Self-Sealing Coupling Half

144820124
96175773: RNCC: 3 | RNVC: 2

13 Jun 1996

4730-14-423-9740
Tube To Boss Straight Adapter

144239740
0500171: RNCC: 3 | RNVC: 2
FOE0500171: RNCC: 5 | RNVC: 9

5 May 1988

4730-14-439-8847
Sediment Strainer Element

144398847
14218: RNCC: 3 | RNVC: 2

30 May 1990

4730-14-227-2992
Bouchon

142272992
2-00134: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-220-6089
Tube Tee

142206089
R6525: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-320-3022
Pipe Flange

143203022
0064771350: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-333-5338
Bloc Mobile Chemise

143335338
A0294-008F12: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-260-9177

4730-14-262-1573

4730-14-367-7323

4730-14-345-5377
Fluid Passage Bolt

143455377
0011200350: RNCC: 3 | RNVC: 2
85-688-6087: RNCC: 6 | RNVC: 9

5 Oct 1977

4730-14-222-7276
Tube Tee

142227276
GSM1297FE3-9TABLEAU1: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-202-3763
Tube Fitting Clinch Sleeve

142023763
405-25RR: RNCC: 3 | RNVC: 2

1 Jan 1963

4730-14-414-5769
Tube Tee

144145769
BN324-554F5-273: RNCC: 3 | RNVC: 2

11 Feb 1987

4730-14-324-1277
Tube Tee

143241277
Q1-5TR30X10X20NN: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-430-4796
Fluid Passage Bolt

144304796
086-01-235: RNCC: 3 | RNVC: 2

22 Mar 1989

4730-14-270-0110
Tube-Hose Fitting Compression Sleeve

142700110
7062BD1B8Z10CNT18-10: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-436-1238
Pipe Flange

144361238
J05150-04-0100P051: RNCC: 3 | RNVC: 2

6 Dec 1989

4730-14-444-3267
Tube To Boss Straight Adapter

144443267
355A53-3002-20: RNCC: 3 | RNVC: 2

8 Jan 1991

4730-14-469-1482
Quick Disconnect Coupling Half

144691482
S61-703-40BRONZE: RNCC: 2 | RNVC: 2

8 Apr 1994

4730-14-333-5313
Hydraulic System Accessories Manifold

143335313
81536601: RNCC: 3 | RNVC: 2
81536-601: RNCC: 5 | RNVC: 9
81536601: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-526-4839
Drainage Pipe Coupling

145264839
RO5828-0-01: RNCC: 3 | RNVC: 2
63D06602: RNCC: 5 | RNVC: 2
R05828-0-01: RNCC: 5 | RNVC: 2

1 Aug 2001

4730-14-489-1854
Fluid-Emulsion Spray Nozzle

144891854
70781-5,8MM: RNCC: 3 | RNVC: 2
4400-22-A-F55-5,8MM: RNCC: 5 | RNVC: 2

2 Jul 1997

4730-14-500-6861
Tube Tee

145006861
EVL12-S0MDKA3C: RNCC: 3 | RNVC: 2
EVL12S0MDKA3C: RNCC: 5 | RNVC: 2
F300 0T 024 7052: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-344-2792
Tube To Boss Straight Adapter

143442792
12-16-15-21CYL: RNCC: 3 | RNVC: 2
UMA16X15-21N: RNCC: 3 | RNVC: 2
4A16-15-21CYL: RNCC: 3 | RNVC: 2
121514: RNCC: 5 | RNVC: 2

10 Aug 1977

4730-14-389-6305
Tube To Boss Straight Adapter

143896305
8405-42-49: RNCC: 3 | RNVC: 2
84054249: RNCC: 3 | RNVC: 2

20 Dec 1983

4730-14-399-8796
Quick Disconnect Coupling Assembly

143998796
N007129-77: RNCC: 3 | RNVC: 2
N007-129-77: RNCC: 5 | RNVC: 2
7729210897: RNCC: 5 | RNVC: 9

11 Apr 1985

4730-14-533-2442
Tube To Boss Straight Adapter

145332442
P106964VD: RNCC: 3 | RNVC: 2

29 Jan 2003

4730-14-324-7889
Swivel Retaining Pipe Flange

143247889
SEAS20584REP3M0NTAGEC: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-360-3764
Collecteur Avant

143603764
0308857700: RNCC: 3 | RNVC: 2

23 Nov 1979

4730-14-247-1559
Bouchon Filete

142471559
0003570013: RNCC: 3 | RNVC: 2
0003570013: RNCC: 5 | RNVC: 9
3570013: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-556-6599
Pipe To Tube Straight Adapter

145566599
16M33F87OMLOS: RNCC: 3 | RNVC: 2

31 Mar 2008

4730-14-297-7543
Barillet 8Voies Tab

142977543
R32977SMBR03: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-520-2984
Tube To Boss Straight Adapter

145202984
6-133-M2-SS-WC0: RNCC: 3 | RNVC: 9

17 May 2000

4730-14-247-3635
Mamelon Special

142473635
S2573: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-354-7531
Fluid Pressure Line Multiple Connector

143547531
150403: RNCC: 3 | RNVC: 2

20 Feb 1979

4730-14-547-3702
Bulkhead Hose Connector

145473702
463105: RNCC: 3 | RNVC: 2

11 Oct 2005

4730-14-348-4746
Bulkhead Hose Connector

143484746
9150505386: RNCC: 3 | RNVC: 2
T3040CX10001F6D22IN0X: RNCC: 5 | RNVC: 2

29 Mar 1978

4730-14-555-2085
Quick Disconnect Coupling Assembly

145552085
1541120: RNCC: 3 | RNVC: 2

10 Oct 2007

4730-14-460-6635
Lubrication Fitting

144606635
NIPS M6: RNCC: 3 | RNVC: 2
NIPS M6: RNCC: 5 | RNVC: 2

4 Feb 1993

4730-14-339-8075

4730-14-223-8648

4730-14-316-9095

4730-14-307-1878
Fluid Pressure Line Multiple Connector

143071878
1070260022: RNCC: 3 | RNVC: 2
1070260022: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-356-6302

4730-14-339-8076

4730-14-462-8461
Bouchon Lisse

144628461
303555-03-01: RNCC: 3 | RNVC: 2

5 May 1993

4730-14-448-0665
Tube To Boss Straight Adapter

144480665
PM1A707121120: RNCC: 3 | RNVC: 2
PM1A707121120: RNCC: 5 | RNVC: 2

12 Jun 1991

4730-14-280-6666
Quick Disconnect Coupling Half

142806666
QSF8: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-270-2431
Sediment Strainer Element

142702431
183882: RNCC: 3 | RNVC: 2
183882: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-355-9429
Tube To Boss Straight Adapter

143559429
7189122108: RNCC: 3 | RNVC: 2
16107200: RNCC: 5 | RNVC: 2
71891221: RNCC: 5 | RNVC: 2

5 Apr 1979

4730-14-340-5516

4730-14-262-1373

4730-14-410-3243
Fluid Pressure Line Multiple Connector

144103243
332A75-2430-00: RNCC: 3 | RNVC: 2

18 Jun 1986

4730-14-562-8554
Tube Coupling Nut

145628554
0462A27-01: RNCC: 3 | RNVC: 2

27 Nov 2009

4730-14-308-5951
Bulkhead Hose Connector

143085951
NO PRIMARY REF14-308-5951: RNCC: 3 | RNVC: 2
4682: RNCC: 5 | RNVC: 9
4682: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-530-5086
Fluid Passage Bolt

145305086
01.22540004: RNCC: 3 | RNVC: 2
SYQ1704: RNCC: 5 | RNVC: 2
01-22540004: RNCC: 5 | RNVC: 2

18 Jun 2002

4730-14-314-4765
Tube To Boss Straight Adapter

143144765
73-071-104: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-256-0571
Raccord Vabco

142560571
UMB14-1-2BUA9M2: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-366-8636
Tube Tee

143668636
330A72-1610-05: RNCC: 3 | RNVC: 2

20 Nov 1980

4730-14-424-4610
Fluid Pressure Line Multiple Connector

144244610
PZCF283: RNCC: 3 | RNVC: 2
PZC-F283: RNCC: 5 | RNVC: 2

19 May 1988

4730-14-498-7280
Tube To Boss Straight Adapter

144987280
NO PRIMARY REF14-498-7280: RNCC: 3 | RNVC: 2
12-10-04-194: RNCC: 5 | RNVC: 9
121004194: RNCC: 5 | RNVC: 9
F300 0T 008 2228: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-500-7394
Tube Tee

145007394
EVT22-L0MDKA3C: RNCC: 3 | RNVC: 2
EVT22L0MDKA3C: RNCC: 5 | RNVC: 2
F300 0T 024 7591: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-379-8225
Tube Tee

143798225
P166B080606S: RNCC: 3 | RNVC: 2
723.B.06S.06.08: RNCC: 3 | RNVC: 2
723B08 06 06S: RNCC: 5 | RNVC: 2
74723B080606S: RNCC: 5 | RNVC: 2
DHS613-643-21: RNCC: 5 | RNVC: 2
723 B 08 06 06S: RNCC: 5 | RNVC: 2
723B08-06-06S: RNCC: 5 | RNVC: 2
723B080606S: RNCC: 5 | RNVC: 2
74723B080606S: RNCC: 5 | RNVC: 2

20 Oct 1982

4730-14-333-4034
Tube Coupling Assembly

143334034
0-3601S16A: RNCC: 3 | RNVC: 2
0-3601S16A: RNCC: 5 | RNVC: 9
85-688-9380: RNCC: 6 | RNVC: 9

2 Jul 1975

4730-14-235-1523
Tube To Boss Straight Adapter

142351523
9910084: RNCC: 3 | RNVC: 2
RAN2816-4-5LAIT0N: RNCC: 3 | RNVC: 9
9910084: RNCC: 5 | RNVC: 2
RAN2816-4-5: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-322-5450

4730-14-322-5459

4730-14-556-1227
Pipe Flange

145561227
0000373020: RNCC: 3 | RNVC: 2

4 Feb 2008

4730-14-355-0215
Tube Union

143550215
02240016200: RNCC: 3 | RNVC: 2
022400162: RNCC: 5 | RNVC: 2

20 Feb 1979

4730-14-288-3029

4730-14-276-2306
Fluid Passage Bolt

142762306
A72695: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-412-9404
Hose To Boss Straight Adapter

144129404
H47094: RNCC: 3 | RNVC: 2

5 Nov 1986

4730-14-485-3111
Bulkhead Hose Connector

144853111
RA1M525001190: RNCC: 3 | RNVC: 2

15 Jan 1997

4730-14-520-0473
Threaded Tube Fitting Plug

145200473
9797ET: RNCC: 3 | RNVC: 2
009990010P: RNCC: 5 | RNVC: 2

9 May 2000

4730-14-496-5261
Tube To Boss Straight Adapter

144965261
550298: RNCC: 3 | RNVC: 2
F300 0T 021 6312: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-496-3801
Tube To Boss Straight Adapter

144963801
190432: RNCC: 3 | RNVC: 2
F300 0T 021 4679: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-281-5312
Tube Fitting Brazing Ferrule

142815312
X515803: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-481-5519
Hose To Gas Fitting Straight Adapter

144815519
45391412: RNCC: 3 | RNVC: 2

16 May 1996

4730-14-542-2052
Fluid-Emulsion Spray Nozzle

145422052
511064608: RNCC: 3 | RNVC: 2
511064608: RNCC: 5 | RNVC: 9

8 Jul 2004

4730-14-460-0353
Hose To Boss Straight Adapter

144600353
321919: RNCC: 3 | RNVC: 2
321919: RNCC: 5 | RNVC: 9

7 Jan 1993

4730-14-542-3510
Return Tube Bend

145423510
162224007: RNCC: 3 | RNVC: 2

8 Jul 2004

4730-14-217-5381
Raccord De Cloison

142175381
R5712: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-285-2695

4730-14-211-4296
Raccord

142114296
43133: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-303-9249

4730-14-575-0334
Fluid Pressure Line Multiple Connector

145750334
WH10LMKDSCF: RNCC: 3 | RNVC: 2
435660: RNCC: 5 | RNVC: 2

7 Mar 2013

4730-14-284-9996

4730-14-392-5325
Asse Fourrure Corps

143925325
215821: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-561-6774
Quick-Disconnect Nipple

145616774
1890743: RNCC: 3 | RNVC: 2

19 Aug 2009

4730-14-561-6035
Return Tube Bend

145616035
12C6MLOS: RNCC: 3 | RNVC: 2
20 236 913 4460: RNCC: 5 | RNVC: 2

3 Aug 2009

4730-14-330-2273
Graisseur Allonge

143302273
9207726: RNCC: 3 | RNVC: 9

2 Jul 1975

4730-14-273-5131

4730-14-330-3314

4730-14-393-1485
Tube Tee

143931485
BP7-6: RNCC: 3 | RNVC: 2

12 Apr 1984

4730-14-283-5532

4730-14-444-7732
Tube To Boss Straight Adapter

144447732
UMA16XJE12-17SNEZJ8: RNCC: 3 | RNVC: 2
LW116AP1606S: RNCC: 5 | RNVC: 2
567891: RNCC: 5 | RNVC: 9
F300 0T 009 9586: RNCC: 6 | RNVC: 9

21 Jan 1991

4730-14-410-3198
Fluid Pressure Line Multiple Connector

144103198
332A75-2120-01: RNCC: 3 | RNVC: 2

18 Jun 1986

4730-14-218-7808
Lubrication Fitting

142187808
G77-10-100: RNCC: 3 | RNVC: 9

30 Jun 1999

4730-14-431-7450
Pipe Flange

144317450
E29203-01B-PN16DN80Z2CND17-12: RNCC: 2 | RNVC: 2
4730HADN080: RNCC: 5 | RNVC: 2

10 May 1989

4730-14-339-9920
Barillet A 5 Voies

143399920
GSM163-006BF14: RNCC: 3 | RNVC: 2
GSM163-06BF14: RNCC: 5 | RNVC: 2

18 Jan 1977

4730-14-271-7730

4730-14-273-5418

4730-14-262-1470

4730-14-366-7801
Distributio Platine

143667801
208406: RNCC: 3 | RNVC: 2

20 Nov 1980

4730-14-434-7108
Adaptateur Bride

144347108
BN329515C2DN50AC: RNCC: 3 | RNVC: 2

2 Oct 1989

4730-14-386-9954
Tube Union

143869954
HBRAB8: RNCC: 3 | RNVC: 2
HBRAB8: RNCC: 3 | RNVC: 2

24 Aug 1983

4730-14-294-2805

4730-14-227-8061

Load More Results