What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 68 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 68 of 185

4730-14-350-9890

4730-14-480-0453
Adaptateur

144800453
U9101531: RNCC: 3 | RNVC: 2
5000790473: RNCC: 5 | RNVC: 2

21 Feb 1996

4730-14-576-9938
Hydraulic Manifold Assembly

145769938
COLLE92324A10: RNCC: 3 | RNVC: 2
4730MT0200352: RNCC: 6 | RNVC: 9

26 Jul 2013

4730-14-321-3159

4730-14-285-3524

4730-14-223-5946

4730-14-432-4141
Compensation Cale

144324141
I131CALEDN80MAR: RNCC: 3 | RNVC: 2

12 Jun 1989

4730-14-367-7999

4730-14-297-2223

4730-14-311-6293

4730-14-393-9151
Raccord Embout Male

143939151
434-35: RNCC: 3 | RNVC: 2

23 Jun 1984

4730-14-284-2087

4730-14-350-9211

4730-14-545-8701
Straight Tubing Connector

145458701
Z6699: RNCC: 3 | RNVC: 2

23 May 2005

4730-14-552-1048
Tube To Boss Straight Adapter

145521048
0000311920: RNCC: 3 | RNVC: 2

27 Nov 2006

4730-14-512-0178
Tube To Boss Straight Adapter

145120178
0052978: RNCC: 3 | RNVC: 2
93814420: RNCC: 3 | RNVC: 9

2 Feb 1999

4730-14-552-1059
Pipe To Gas Fitting Straight Adapter

145521059
809605: RNCC: 3 | RNVC: 2
360A303: RNCC: 5 | RNVC: 2

27 Nov 2006

4730-14-239-7512

4730-14-250-2137

4730-14-427-4450
Reducteur

144274450
19437: RNCC: 3 | RNVC: 2

19 Oct 1988

4730-14-253-9720
Raccord Special

142539720
PR47283: RNCC: 3 | RNVC: 2

13 Jan 2000

4730-14-387-0498
Tube Tee

143870498
RBF03285: RNCC: 3 | RNVC: 2
D060-1-4: RNCC: 3 | RNVC: 2
8206319: RNCC: 5 | RNVC: 9

24 Aug 1983

4730-14-548-9141
Tube Coupling

145489141
98787-2: RNCC: 3 | RNVC: 2

23 Feb 2006

4730-14-273-5276

4730-14-260-9167

4730-14-333-8713

4730-14-448-7676
Tube To Boss Straight Adapter

144487676
59102-314-1: RNCC: 3 | RNVC: 2
59102-314-1: RNCC: 5 | RNVC: 9

10 Jul 1991

4730-14-387-8869
Tube Tee

143878869
723 B 06S 08 08: RNCC: 3 | RNVC: 2
P166B06S0808: RNCC: 3 | RNVC: 2
74723B06S0808: RNCC: 5 | RNVC: 2
74723B06S0808: RNCC: 5 | RNVC: 2
723B06S08 08: RNCC: 5 | RNVC: 2
723B06S08-08: RNCC: 5 | RNVC: 2
723B06S0808: RNCC: 5 | RNVC: 2

12 Oct 1983

4730-14-477-3973
Pipe To Tube Swivel Joint

144773973
704A34-422-027: RNCC: 1 | RNVC: 2
614-3/4EK: RNCC: 3 | RNVC: 2

23 Aug 1995

4730-14-504-9125
Pipeline Flexible Spacer

145049125
DILATOFLEX-K-CC-DN250PN16: RNCC: 3 | RNVC: 2
GR1/250/KR320-WG/E/PN16: RNCC: 3 | RNVC: 2
ERV-DOUBLEROUGE-DN250PN16: RNCC: 3 | RNVC: 9

11 Mar 1998

4730-14-387-8874
Tube Tee

143878874
728 B 08 06S 08: RNCC: 3 | RNVC: 2
P167B0806S08: RNCC: 3 | RNVC: 2
74728B0806S08: RNCC: 5 | RNVC: 2
728B08-06S08: RNCC: 5 | RNVC: 2
728B08 06S08: RNCC: 5 | RNVC: 2
728B0806S08: RNCC: 5 | RNVC: 2
74728B0806S08: RNCC: 5 | RNVC: 2

12 Oct 1983

4730-14-328-5003
Bride A Raccord

143285003
GSM162-006F6: RNCC: 3 | RNVC: 2
000MA069REP12: RNCC: 5 | RNVC: 2
GSM162-06F6: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-350-5513
Raccord Corps

143505513
A1-76976: RNCC: 3 | RNVC: 2

12 Jul 1978

4730-14-237-2207
Bouchon Etanche Pou

142372207
10-64-113: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-324-7763
Tube Tee

143247763
GSM163-004F15AVECECR0USRACC0RD: RNCC: 3 | RNVC: 2
GSM163-04F15AVECECR0USRACC0RD: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-419-1843
Quick Disconnect Coupling Half

144191843
NO PRIMARY REF14-419-1843: RNCC: 3 | RNVC: 2
QSU12/05: RNCC: 5 | RNVC: 9

12 Oct 1987

4730-14-415-3855
Tube Tee

144153855
1809-25-30X200NU: RNCC: 3 | RNVC: 2
T0RSA25X30-200NNU: RNCC: 3 | RNVC: 2
105A25-30-200NU: RNCC: 3 | RNVC: 2
1809-25-30X200NNNU: RNCC: 5 | RNVC: 2
121056NU: RNCC: 5 | RNVC: 2

11 May 1987

4730-14-230-6063

4730-14-360-1070

4730-14-260-9359

4730-14-562-6202
Tube Union

145626202
G30SCFX: RNCC: 3 | RNVC: 2
A231004000233: RNCC: 5 | RNVC: 2
G30SCFX: RNCC: 5 | RNVC: 9

9 Nov 2009

4730-14-564-7524
Hydraulic System Accessories Manifold

145647524
36512364: RNCC: 3 | RNVC: 2

3 Jun 2010

4730-14-280-8648
Raccord Amortisseur

142808648
26492-3CM: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-335-1870

4730-14-446-4750
Raccord Spherique

144464750
9932080080: RNCC: 3 | RNVC: 2

20 Mar 1991

4730-14-370-2615

4730-14-337-0912

4730-14-262-1364

4730-14-345-2030
Bulkhead Hose Connector

143452030
A11B231253004U1: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-503-1954
Hose Coupling Assembly

145031954
DA2C729001700A2: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-560-0298
Tube To Hose Elbow

145600298
7421020465: RNCC: 1 | RNVC: 2
27742010: RNCC: 3 | RNVC: 2
21020465: RNCC: 5 | RNVC: 2

16 Mar 2009

4730-14-265-9455
Raccord Souple

142659455
5533070: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-477-3154
Quick Disconnect Coupling Half

144773154
LP-006-2-WR013: RNCC: 3 | RNVC: 2
4880: RNCC: 5 | RNVC: 9

10 Aug 1995

4730-14-368-7395
Fluid Passage Bolt

143687395
17A10-14X150: RNCC: 3 | RNVC: 2
217-1-04158: RNCC: 5 | RNVC: 2
217104158: RNCC: 5 | RNVC: 2
585 90 30 043 11: RNCC: 5 | RNVC: 2

10 Mar 1981

4730-14-362-9847
Tube To Boss Straight Adapter

143629847
UMCA12X8-13NNU: RNCC: 3 | RNVC: 2
4A12-8-13C0NU: RNCC: 3 | RNVC: 2
12-12-8-13C0NU: RNCC: 3 | RNVC: 2

3 Apr 1980

4730-14-568-9013
Hose Clamp

145689013
16702492: RNCC: 3 | RNVC: 2
010,9-505R: RNCC: 5 | RNVC: 2
OSE 10,9/5W4: RNCC: 5 | RNVC: 9

20 Jul 2011

4730-14-500-7919
Swivel Flange To Tube Elbow

145007919
WFS35/30-SOMDA3C: RNCC: 3 | RNVC: 2
WFS35/30-SOMDA3C: RNCC: 3 | RNVC: 9
F300 0T 024 8119: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-559-8583
Hose To Gas Fitting Straight Adapter

145598583
1DC27430: RNCC: 3 | RNVC: 2

25 Feb 2009

4730-14-230-5517

4730-14-573-2322
Tube Coupling

145732322
JL-3512: RNCC: 3 | RNVC: 2
703B16: RNCC: 5 | RNVC: 2
SPP2680238: RNCC: 5 | RNVC: 2

25 Sep 2012

4730-14-230-5823
Robinet Equipe

142305823
M3E712-18: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-233-2477
Buse Speciale

142332477
S11686DB: RNCC: 3 | RNVC: 2
S11686: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-569-5510
Return Pipe Bend

145695510
5430571: RNCC: 3 | RNVC: 2

26 Sep 2011

4730-14-204-8531
Tube To Boss Straight Adapter

142048531
8085: RNCC: 3 | RNVC: 2
8085: RNCC: 6 | RNVC: 9

1 Jan 1963

4730-14-349-4861
Tube To Boss Straight Adapter

143494861
4001-9-25: RNCC: 3 | RNVC: 2

22 May 1978

4730-14-203-0752
Fluid Pressure Line Multiple Connector

142030752
501-772-023-0: RNCC: 3 | RNVC: 2

1 Jan 1963

4730-14-353-4051
Tube To Boss Straight Adapter

143534051
MCB12V13: RNCC: 3 | RNVC: 2
Q1-52-12-8-13C0NU: RNCC: 3 | RNVC: 2

8 Dec 1978

4730-14-246-1502
Tube To Boss Straight Adapter

142461502
42-8-8-13C0: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-435-7180
Tube To Boss Straight Adapter

144357180
5-4F3MXS: RNCC: 3 | RNVC: 2
5-4F3MXS: RNCC: 3 | RNVC: 9
98156-1574: RNCC: 5 | RNVC: 2
RAR1438: RNCC: 5 | RNVC: 2
98156/1574: RNCC: 5 | RNVC: 2
F3XS8-1/4: RNCC: 5 | RNVC: 9
F3XS8-1-4: RNCC: 5 | RNVC: 9

21 Nov 1989

4730-14-232-1647

4730-14-269-1841

4730-14-420-0718
Flange To Hose Straight Adapter

144200718
NO PRIMARY REF14-420-0718: RNCC: 3 | RNVC: 2
89165024: RNCC: 5 | RNVC: 2
R4: RNCC: 5 | RNVC: 9

18 Nov 1987

4730-14-452-8264
Pipe Expansion Joint

144528264
98657332002: RNCC: 3 | RNVC: 2
201A0174: RNCC: 5 | RNVC: 2
5BST2DN500/1/L700: RNCC: 5 | RNVC: 2
43587305: RNCC: 5 | RNVC: 2

22 Jan 1992

4730-14-263-6363
Tube To Boss Straight Adapter

142636363
7062BC1RCET1-30A52-3: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-257-6000
Pipe Flange

142576000
NO PRIMARY REF14-257-6000: RNCC: 3 | RNVC: 2
141063: RNCC: 5 | RNVC: 9
2-141063-8: RNCC: 5 | RNVC: 9

1 Jan 1969

4730-14-562-5413
Tube To Boss Tee

145625413
3198 06 13: RNCC: 3 | RNVC: 2
FS0002400: RNCC: 6 | RNVC: 9

3 Nov 2009

4730-14-247-3697
Raccord Special

142473697
A3-71178: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-523-1330
Tube Coupling

145231330
067180Z: RNCC: 3 | RNVC: 2

8 Jan 2001

4730-14-438-4410
Self-Sealing Coupling Assembly

144384410
SBE 1192: RNCC: 3 | RNVC: 2
SBE1192: RNCC: 5 | RNVC: 2
89138654: RNCC: 5 | RNVC: 2

21 Mar 1990

4730-14-372-3888
Fluid Pressure Line Multiple Connector

143723888
109-12Z131: RNCC: 3 | RNVC: 2

1 Sep 1981

4730-14-504-0591
Tube Coupling

145040591
NNP4730878750138: RNCC: 3 | RNVC: 2

5 Feb 1998

4730-14-548-0110
Hydraulic System Accessories Manifold

145480110
2327-32: RNCC: 3 | RNVC: 2
V803100: RNCC: 5 | RNVC: 2

5 Dec 2005

4730-14-503-2048
Tube Coupling

145032048
RA1M504901071A1: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-261-7866

4730-14-266-2580

4730-14-355-5580
Tube To Boss Straight Adapter

143555580
1DM8 1-8BGS: RNCC: 3 | RNVC: 2
AA8X1-8BGSN: RNCC: 3 | RNVC: 2

19 Mar 1979

4730-14-305-2232

4730-14-558-6008
Adapter Bushing

145586008
L15035: RNCC: 3 | RNVC: 9

16 Oct 2008

4730-14-512-6375
Tube Fitting Socket Welded Ferrule

145126375
NO PRIMARY REF14-512-6375: RNCC: 3 | RNVC: 2
NNP 4730864526660: RNCC: 5 | RNVC: 9

17 Feb 1999

4730-14-318-5448
Tube To Boss Straight Adapter

143185448
7062BB1VCT1-10UA9: RNCC: 2 | RNVC: 1
46H165: RNCC: 5 | RNVC: 9
46L165: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-455-4016
Quick Disconnect Coupling Half

144554016
RBE06-1151-0DIA4-5JV: RNCC: 3 | RNVC: 2
91726923: RNCC: 5 | RNVC: 2
91727012: RNCC: 5 | RNVC: 2

21 May 1992

4730-14-265-1203
Tube Tee

142651203
702A30-4202-20: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-390-0066
Tube Tee

143900066
DHS613-646-53: RNCC: 3 | RNVC: 2

26 Jan 1984

4730-14-435-3778
Quick Disconnect Coupling Half

144353778
RBE11-1103ICHPJVFB: RNCC: 3 | RNVC: 2

8 Nov 1989

4730-14-263-6401
Tube To Boss Straight Adapter

142636401
7062BC1RPET2-41-5C30NCD10: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-218-3361
Tube To Boss Straight Adapter

142183361
UMA20X24-150N: RNCC: 3 | RNVC: 2
4A20-24X150: RNCC: 3 | RNVC: 2
M20-24X1-5: RNCC: 3 | RNVC: 2
12-20-24X150: RNCC: 3 | RNVC: 2
121015: RNCC: 5 | RNVC: 2
99-621-20-244-1: RNCC: 5 | RNVC: 2
99621202441: RNCC: 5 | RNVC: 2
UMA20X24-150: RNCC: 5 | RNVC: 2

1 Jan 1965

4730-14-290-9530

4730-14-231-9184
Raccord Special

142319184
6891476540: RNCC: 3 | RNVC: 2
689-147654-0: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-325-8965
Tube To Boss Straight Adapter

143258965
UMB14 3-8BSPC: RNCC: 3 | RNVC: 2
UMB14 3-8C0: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-328-7913
Tube To Boss Straight Adapter

143287913
0000251800: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-375-6860
Raccord Special

143756860
SNA990MC78100F68: RNCC: 3 | RNVC: 2

26 Feb 1982

4730-14-574-9999
Hose Tee

145749999
7421168488: RNCC: 3 | RNVC: 2
7421168488: RNCC: 5 | RNVC: 2
21168488: RNCC: 5 | RNVC: 2

6 Mar 2013

4730-14-201-0570

4730-14-340-1216

4730-14-568-9785
Tube Tee

145689785
TRS1815: RNCC: 3 | RNVC: 2

25 Jul 2011

4730-14-365-7172
Adaptateur Dazote

143657172
003873035P: RNCC: 3 | RNVC: 2

8 Oct 1980

4730-14-546-5646
Tube Union

145465646
4A10-15-21CYL: RNCC: 3 | RNVC: 2
82112300: RNCC: 5 | RNVC: 2

20 Jul 2005

4730-14-261-3891
Bouchon Special

142613891
33205: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-397-3777
Tube To Boss Straight Adapter

143973777
16011120R: RNCC: 3 | RNVC: 2

18 Dec 1984

4730-14-382-8793
Tube Coupling

143828793
PE60001K06: RNCC: 3 | RNVC: 2

17 Feb 1983

4730-14-272-2582
Fluid Passage Bolt

142722582
0000290130: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-416-2365
Tube Coupling

144162365
91511269: RNCC: 3 | RNVC: 2

3 Jun 1987

4730-14-265-7310

4730-14-365-1523
Venti Gaine Raccord

143651523
969900: RNCC: 3 | RNVC: 2
969900: RNCC: 5 | RNVC: 9

2 Sep 1980

4730-14-316-6713

4730-14-367-7839

4730-14-448-1769
Tube To Boss Straight Adapter

144481769
A0338-004FF7: RNCC: 3 | RNVC: 2

12 Jun 1991

4730-14-470-6150
Drain Extension Tube

144706150
1991-11-02REP08PLC1990/A: RNCC: 3 | RNVC: 2

28 Jun 1994

4730-14-260-2867
Tube To Boss Straight Adapter

142602867
676-306-012-0: RNCC: 3 | RNVC: 2
959201: RNCC: 3 | RNVC: 2
676-306-012-0: RNCC: 5 | RNVC: 2
959201: RNCC: 5 | RNVC: 2
676-306-012: RNCC: 5 | RNVC: 2
676-306-012-0: RNCC: 5 | RNVC: 2
60290-03-00: RNCC: 5 | RNVC: 2
60290-03-00B: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-441-4832
Tube To Boss Straight Adapter

144414832
12071: RNCC: 3 | RNVC: 9
MBSP1/2XMB3/4: RNCC: 3 | RNVC: 9

29 Aug 1990

4730-14-350-7012

4730-14-223-6537
Bride Pour Tube Mod

142236537
466A222: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-327-8315

4730-14-267-8336

4730-14-367-7759

4730-14-567-5961
Flange To Hose Straight Adapter

145675961
F2121007520000: RNCC: 3 | RNVC: 2

29 Mar 2011

4730-14-353-0911
Sediment Strainer Element

143530911
RC55-78: RNCC: 3 | RNVC: 2

8 Dec 1978

4730-14-556-3727
Quick Disconnect Coupling Half

145563727
RBE08.6152/OD/IA/HP: RNCC: 3 | RNVC: 2
RBE08-6152-OD-IA-HP: RNCC: 5 | RNVC: 2
RBE8-61520DIAHP: RNCC: 5 | RNVC: 2
RBE08-6152/OD/IA/HP: RNCC: 5 | RNVC: 2
RBE08-61520DIAHP: RNCC: 5 | RNVC: 2
RBE8-6152/OD/IA/HP: RNCC: 5 | RNVC: 2
EQF25867089: RNCC: 5 | RNVC: 2

3 Mar 2008

4730-14-479-9215
Quick Disconnect Coupling Half

144799215
K06L38-201: RNCC: 3 | RNVC: 2

14 Feb 1996

4730-14-495-6346
Union

144956346
U50375-01: RNCC: 3 | RNVC: 2
F300 0T 019 5626: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-459-3030
Tube To Boss Straight Adapter

144593030
109851: RNCC: 3 | RNVC: 2
LV111-CS2533S: RNCC: 5 | RNVC: 2

24 Nov 1992

4730-14-438-3189
Quick Disconnect Coupling Half

144383189
RBE03-1250: RNCC: 3 | RNVC: 2

13 Mar 1990

4730-14-262-1731
Pipe Flange

142621731
7062DL1F1F98-7-14CD2-5: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-387-1330
Pipeline Flexible Spacer

143871330
C8002SA02REP0-01001: RNCC: 3 | RNVC: 2

24 Aug 1983

4730-14-457-7077
Pipe Fitting Flared Collar

144577077
89056-300: RNCC: 3 | RNVC: 2
RAR1558: RNCC: 5 | RNVC: 2
89056300: RNCC: 5 | RNVC: 2

16 Sep 1992

4730-14-449-5539
Tube Union

144495539
RACCORD IMP G1/4A EM S13,5: RNCC: 3 | RNVC: 2
BN329-507: RNCC: 5 | RNVC: 2

26 Aug 1991

4730-14-040-4032
Tube To Boss Straight Adapter

140404032
R 32 16 22 150 NU: RNCC: 3 | RNVC: 2
R32-16-22-150: RNCC: 3 | RNVC: 9
91313822: RNCC: 5 | RNVC: 2
EDM0146: RNCC: 5 | RNVC: 2
R32-16-22X1-5: RNCC: 5 | RNVC: 2
R32-16-22X150: RNCC: 5 | RNVC: 2
R3216-22X150: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-337-4663
Raccord Banjo

143374663
SP3-01-09-02: RNCC: 3 | RNVC: 2

7 Oct 1976

4730-14-294-7960

4730-14-268-6429

4730-14-435-5597
Multiple Raccord

144355597
DA2C781210S1: RNCC: 3 | RNVC: 2

8 Nov 1989

4730-14-391-2998
Pipe Clamp Coupling

143912998
4845: RNCC: 3 | RNVC: 9

1 Mar 1984

4730-14-496-5524
Tube To Boss Straight Adapter

144965524
518344: RNCC: 3 | RNVC: 2
F300 0T 021 6577: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-202-9587
Fluid Pressure Line Multiple Connector

142029587
P3818: RNCC: 3 | RNVC: 2
3818: RNCC: 5 | RNVC: 2
00381877: RNCC: 5 | RNVC: 2

1 Jan 1963

4730-14-213-0761

4730-14-303-7816

4730-14-313-6749
Raccord Prise Bp

143136749
71190200000NA0A: RNCC: 3 | RNVC: 2
P6213BP: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-405-4443
Tube Coupling

144054443
CB3A12 3/4: RNCC: 3 | RNVC: 9

27 Nov 1985

4730-14-561-3269
Tube Elbow

145613269
ASNA0191AD20: RNCC: 1 | RNVC: 2
Q01R7020: RNCC: 3 | RNVC: 2
A0191AD20: RNCC: 5 | RNVC: 2
ASNA0191AD20: RNCC: 5 | RNVC: 2
A0191AD20: RNCC: 5 | RNVC: 2

6 Jul 2009

4730-14-280-1682
Ajutage De Raccord

142801682
15207732: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-563-6911
Water Distribution Nozzle

145636911
001783: RNCC: 3 | RNVC: 2

5 Mar 2010

4730-14-367-7803

4730-14-369-8846

4730-14-563-6309
Tube Coupling

145636309
SMK 20-G.3/8-PB/VB: RNCC: 3 | RNVC: 2
911112438: RNCC: 5 | RNVC: 2
FS0002094: RNCC: 6 | RNVC: 9

2 Mar 2010

4730-14-272-1039
Tube Tee

142721039
EN10242-B1-3/4X1/2X3/4-ZN-A: RNCC: 2 | RNVC: 2
770130227: RNCC: 3 | RNVC: 2
130 3-4X1-2X3-4Z: RNCC: 5 | RNVC: 2
770 130 227: RNCC: 5 | RNVC: 2
51 3-4X1-2X3-4Z: RNCC: 5 | RNVC: 9
E29801B1EDEZ: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-372-4371
Cloche Degagement A

143724371
BN324-509DN40: RNCC: 3 | RNVC: 2

1 Sep 1981

4730-14-372-3912
Tuyau Raccord Droit

143723912
G4411-4-4S: RNCC: 3 | RNVC: 2

1 Sep 1981

4730-14-561-8171
Tube Union

145618171
WF8UNPMB12M16: RNCC: 3 | RNVC: 2
WF8UNPMB12M16: RNCC: 5 | RNVC: 9

9 Sep 2009

4730-14-575-7724
Flange To Tube Elbow

145757724
M2811343700000: RNCC: 3 | RNVC: 2

30 Apr 2013

4730-14-265-9526
Raccord Double Male

142659526
DM101: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-389-1972
Ensemble Drain Equi

143891972
CG2070699610: RNCC: 3 | RNVC: 2

29 Nov 1983

4730-14-269-2119

4730-14-251-1351

4730-14-282-2430

4730-14-339-8994
Tube Coupling

143398994
0-3751P16A: RNCC: 3 | RNVC: 2
0-3751P16A: RNCC: 5 | RNVC: 9
85-688-9401: RNCC: 6 | RNVC: 9

18 Jan 1977

4730-14-574-5593
Hose Clamp

145745593
ABS0901R030: RNCC: 1 | RNVC: 3
ABS0901R030: RNCC: 3 | RNVC: 3
901030: RNCC: 5 | RNVC: 1
E-ABS-0901-R030: RNCC: 5 | RNVC: 2

30 Jan 2013

4730-14-269-2052
Pipe Flange

142692052
7066EE1M76-1: RNCC: 2 | RNVC: 2
4730BJ-76,1M: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-271-1741
Tube To Boss Straight Adapter

142711741
611-110-020-0: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-508-0434
Return Tube Bend

145080434
0248206: RNCC: 3 | RNVC: 2

26 Aug 1998

4730-14-395-3760
Tube To Boss Straight Adapter

143953760
N0117F30A: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-365-7339
Tube To Boss Straight Adapter

143657339
7123501: RNCC: 3 | RNVC: 9
ROT7123501: RNCC: 5 | RNVC: 9

8 Oct 1980

4730-14-365-3397

4730-14-575-4549
Pipe Reducer

145754549
D055 04B: RNCC: 3 | RNVC: 2

8 Apr 2013

4730-14-576-3042
Quick Disconnect Coupling Half

145763042
4485: RNCC: 3 | RNVC: 2

11 Jun 2013

4730-14-243-6122

4730-14-367-7378

4730-14-272-9639

4730-14-562-1730
Fluid Pressure Line Multiple Connector

145621730
3538 10 17: RNCC: 3 | RNVC: 2
FS0002437: RNCC: 6 | RNVC: 9

5 Oct 2009

4730-14-238-4073

4730-14-321-7398

4730-14-496-3140
Reduction

4730-14-427-0897
Embou Obtur Raccord

144270897
537468: RNCC: 3 | RNVC: 2

6 Oct 1988

4730-14-295-1008
Fluid Passage Bolt

142951008
274636: RNCC: 3 | RNVC: 2
274636: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-358-8681

4730-14-552-1116
Branched Tubing Connector

145521116
0000361740: RNCC: 3 | RNVC: 2

27 Nov 2006

4730-14-500-6306
Flange To Tube Straight Adapter

145006306
3695102007: RNCC: 3 | RNVC: 2
0195101007: RNCC: 5 | RNVC: 2
F300 0T 024 6492: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-287-7422
Tube To Boss Straight Adapter

142877422
27300840B: RNCC: 3 | RNVC: 2
130084: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-378-6501
Tube To Boss Straight Adapter

143786501
8905101766: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-262-4314
Fluid Passage Bolt

142624314
398198: RNCC: 3 | RNVC: 2
398198: RNCC: 5 | RNVC: 2
398198: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-031-9670
Quick Disconnect Coupling Half

140319670
15173BAA: RNCC: 3 | RNVC: 2

5 Jul 1980

4730-14-516-7516
Tube Tee

145167516
8306292: RNCC: 3 | RNVC: 2
Y00005924: RNCC: 3 | RNVC: 2
Y00005924: RNCC: 5 | RNVC: 9

13 Oct 1999

4730-14-417-9977
Pipe Flange

144179977
3110468: RNCC: 3 | RNVC: 2
3110468: RNCC: 3 | RNVC: 2

6 Aug 1987

4730-14-560-6026
Fluid Pressure Line Multiple Connector

145606026
WH12LRKDSCF: RNCC: 3 | RNVC: 2
CV150541: RNCC: 5 | RNVC: 2
D4937597: RNCC: 5 | RNVC: 2
WH12LRKDSA3: RNCC: 5 | RNVC: 2
D4937597: RNCC: 5 | RNVC: 2

4 May 2009

4730-14-280-0050
Embout Tournant

142800050
A1-71903: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-420-3375
Dobturation Crepine

144203375
LS01-002-09: RNCC: 3 | RNVC: 2

1 Dec 1987

4730-14-465-3940
Manchette Double

144653940
LN326056-27-DN20: RNCC: 3 | RNVC: 2

28 Sep 1993

4730-14-244-8463

4730-14-242-8011

4730-14-262-1524

4730-14-505-3344
Tube Union

145053344
GE10-PLM-ED-0MD: RNCC: 3 | RNVC: 2

18 Mar 1998

4730-14-433-7110
Tube Repair Plug

144337110
NO PRIMARY REF14-433-7110: RNCC: 3 | RNVC: 2
910835P4: RNCC: 5 | RNVC: 9

2 Aug 1989

4730-14-496-9887
Fluid Pressure Line Multiple Connector

144969887
NO PRIMARY REF14-496-9887: RNCC: 3 | RNVC: 2
50-4980: RNCC: 5 | RNVC: 9
F300 0T 022 3968: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-397-0868
Fluid Pressure Line Multiple Connector

143970868
D7N04-90M: RNCC: 3 | RNVC: 2
0000302660: RNCC: 5 | RNVC: 2

1 Dec 1984

4730-14-471-7083
Bulkhead Hose Connector

144717083
LN327-01501DN20: RNCC: 3 | RNVC: 2

13 Sep 1994

4730-14-410-7707
Quick Disconnect Coupling Half

144107707
SBA12-5104: RNCC: 3 | RNVC: 2

9 Jul 1986

4730-14-222-7303
Tube Tee

142227303
GSM1297FE3-22TABLEAU2: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-417-7864
Tube Tee

144177864
ST2069DN80Z2CND17-12-02: RNCC: 2 | RNVC: 2

22 Jul 1987

4730-14-494-7029
Tube To Boss Straight Adapter

144947029
NO PRIMARY REF14-494-7029: RNCC: 3 | RNVC: 2
017978: RNCC: 5 | RNVC: 9
F300 0T 017 8035: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-379-3906
Tube To Boss Straight Adapter

143793906
NO PRIMARY REF14-379-3906: RNCC: 3 | RNVC: 2
345-70213-0: RNCC: 5 | RNVC: 9
345702130: RNCC: 5 | RNVC: 9

1 Oct 1982

4730-14-331-0903
Tube To Boss Straight Adapter

143310903
UMAC12 1/4: RNCC: 3 | RNVC: 2
UMA12-1-4BSPC: RNCC: 5 | RNVC: 2
UMA12G1-4: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-545-3159
Exhaust-Intake Pneumatic Muffler

145453159
SE 3/8L: RNCC: 3 | RNVC: 2

4 Apr 2005

4730-14-304-2963
Fluid Pressure Line Multiple Connector

143042963
121E52-217-00-0: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-212-1475
Tube Coupling Assembly

142121475
0-3901SB25A: RNCC: 3 | RNVC: 2
0-3901SB25A: RNCC: 5 | RNVC: 9
85-691-3824: RNCC: 6 | RNVC: 9

5 Jul 1980

4730-14-557-9836
Self-Sealing Coupling Half

145579836
3320 04 00 12: RNCC: 3 | RNVC: 2

12 Aug 2008

4730-14-245-2120

4730-14-562-6372
Flange To Boss Straight Adapter

145626372
CRB201710150B1: RNCC: 3 | RNVC: 2

10 Nov 2009

4730-14-278-8131
Tube Tee

142788131
10193AREP154: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-543-4890
Hose Connector Sleeve

145434890
F1450987: RNCC: 3 | RNVC: 2

9 Nov 2004

4730-14-213-5827
Tube Coupling Assembly

142135827
3951S32X40X32A: RNCC: 3 | RNVC: 2
3951S32X40X32A: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-302-7891
Sediment Strainer Element

143027891
4860-99: RNCC: 3 | RNVC: 2
4860-99: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-423-7640
Flange To Boss Elbow

144237640
5172307300: RNCC: 3 | RNVC: 2

28 Apr 1988

4730-14-459-3652
Hose To Boss Straight Adapter

144593652
A365183: RNCC: 3 | RNVC: 2
91637881: RNCC: 5 | RNVC: 2
5000787897: RNCC: 5 | RNVC: 2
A365183: RNCC: 5 | RNVC: 9
A365183: RNCC: 5 | RNVC: 9

26 Nov 1992

4730-14-210-7885
Fluid Passage Bolt

142107885
0000128533: RNCC: 3 | RNVC: 2
128533: RNCC: 5 | RNVC: 9
0000128533: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-547-5523
Flange To Tube Straight Adapter

145475523
RA1B236530621: RNCC: 3 | RNVC: 2

15 Oct 2005

4730-14-307-7279
Tube To Boss Straight Adapter

143077279
288020: RNCC: 3 | RNVC: 2
288020: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-279-8422
Fluid Pressure Line Multiple Connector

142798422
0213100260: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-357-9273
Fluid Pressure Line Multiple Connector

143579273
211861: RNCC: 3 | RNVC: 2

20 Jul 1979

4730-14-290-9526
Bulkhead Hose Connector

142909526
000MA1050F28REPPM48D1: RNCC: 3 | RNVC: 2
000MA022F45REPPM48D1: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-374-7773
Bulkhead Hose Connector

143747773
0000364100: RNCC: 3 | RNVC: 2

30 Jan 1982

4730-14-303-7998

4730-14-287-9725

4730-14-560-2307
Hose Elbow

145602307
U6237066: RNCC: 3 | RNVC: 2
CV155784: RNCC: 5 | RNVC: 2
U6237066: RNCC: 5 | RNVC: 2

2 Apr 2009

4730-14-297-8952
Bloc De Derivation

142978952
411MA0162FA4: RNCC: 3 | RNVC: 2
411MA162FA4: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-496-5653
Union

144965653
5010113231: RNCC: 3 | RNVC: 2
F300 0T 021 7162: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-216-1148

4730-14-263-2076

4730-14-275-8741
Siege E Purgeur

142758741
5492: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-269-1894
Pipe Flange

142691894
7066CD1F63-5: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-359-8993
Bride Arriere

143598993
2-23476: RNCC: 3 | RNVC: 2

15 Oct 1979

4730-14-416-5851
Pipe Flange

144165851
4730GG-DN219,1: RNCC: 2 | RNVC: 2
MEC10424: RNCC: 3 | RNVC: 2
4730GG-DN219,1: RNCC: 5 | RNVC: 2

19 Jun 1987

4730-14-430-4597
Tube Fitting Clinch Sleeve

144304597
19RA12-8: RNCC: 3 | RNVC: 2

22 Mar 1989

4730-14-392-4627
Tube To Hose Straight Adapter

143924627
CBMB6-1/8: RNCC: 3 | RNVC: 2
CBMB6-1/8: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-553-9676
Quick Disconnect Coupling Half

145539676
N 012 363 06: RNCC: 3 | RNVC: 2
HCB28/L N 012 363 06: RNCC: 5 | RNVC: 2

5 Jun 2007

4730-14-531-8678
Hose To Gas Fitting Straight Adapter

145318678
8VTXS3/4: RNCC: 3 | RNVC: 2

24 Sep 2002

4730-14-515-4417
Tube To Boss Straight Adapter

145154417
MJ12MJ12MJ12MJ12: RNCC: 3 | RNVC: 2
SOAMJ12MJ12MJ12MJ12: RNCC: 5 | RNVC: 9

13 Jul 1999

4730-14-396-4001
Tube Tee

143964001
TA25NU: RNCC: 3 | RNVC: 2

27 Nov 1984

4730-14-396-2199
Fluid Pressure Line Multiple Connector

143962199
476320P: RNCC: 3 | RNVC: 2

27 Nov 1984

4730-14-273-6040
Fluid Pressure Line Multiple Connector

142736040
11173: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-367-7780

4730-14-292-2375

4730-14-573-2321
Flexible Tube Coupling Assembly

145732321
9911659A: RNCC: 3 | RNVC: 2

25 Sep 2012

4730-14-250-6202
Hose Clamp

142506202
41724: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-346-7108
Pipe Flange

143467108
6784-1EA10A: RNCC: 2 | RNVC: 2

12 Dec 1977

4730-14-364-3893
Fluid Pressure Line Multiple Connector

143643893
616-22ARSK: RNCC: 3 | RNVC: 2

7 Aug 1980

4730-14-268-8725
Tube Tee

142688725
631X6119: RNCC: 3 | RNVC: 2
TR2-10108-631X6119: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-308-8633
Tube To Boss Straight Adapter

143088633
353-149-10805XC38: RNCC: 3 | RNVC: 2
353-149-10805: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-223-8629
Raccord A Joint Cou

142238629
GSM1297FD4-2TABLEAU2D1-25: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-573-0233
Return Pipe Bend

145730233
SPP2650914: RNCC: 3 | RNVC: 2

4 Sep 2012

4730-14-432-4147
Compensation Cale

144324147
I131CALEDN200MAR: RNCC: 3 | RNVC: 2

12 Jun 1989

4730-14-395-3796
Tube Fitting Brazing Ferrule

143953796
N0189F62A: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-397-7627
Quick Disconnect Coupling Half

143977627
1232540: RNCC: 3 | RNVC: 2

9 Jan 1985

4730-14-514-3679
Fluid Pressure Line Multiple Connector

145143679
RA1M726212001A1: RNCC: 3 | RNVC: 2

18 May 1999

4730-14-500-4623
Exhaust-Intake Pneumatic Muffler

145004623
C63403000000: RNCC: 3 | RNVC: 2
F300 0T 024 4792: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-526-9651
Tube Tee

145269651
10317582: RNCC: 3 | RNVC: 2

19 Sep 2001

4730-14-577-8552
Tube Nipple

145778552
0121 10 10: RNCC: 3 | RNVC: 2

15 Oct 2013

4730-14-340-2877

4730-14-240-7530
Reducteur Pour Tube

142407530
0506944: RNCC: 3 | RNVC: 2
50R6944: RNCC: 5 | RNVC: 2
FOE0506944: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-240-2747

4730-14-533-6270
Tube To Boss Straight Adapter

145336270
D109419V: RNCC: 3 | RNVC: 2

12 Feb 2003

4730-14-475-6469
Pipe Flange

144756469
BSNGA40007A: RNCC: 3 | RNVC: 2

25 Apr 1995

4730-14-559-1208
Tube To Boss Straight Adapter

145591208
E.5080784: RNCC: 3 | RNVC: 2

9 Dec 2008

4730-14-261-8487
Pipe Flange

142618487
RUHB4-4: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-522-6448
Lubrication Fitting

145226448
22811-1: RNCC: 3 | RNVC: 2

8 Nov 2000

4730-14-206-1002
Tube Tee

142061002
ES308-4: RNCC: 3 | RNVC: 2
1435: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-514-9902
Tube To Boss Swivel Joint

145149902
M 2605 K ABG 16: RNCC: 3 | RNVC: 2
M2605KABG16: RNCC: 5 | RNVC: 2

25 Jun 1999

4730-14-040-6753
Flexible Tube Coupling Assembly

140406753
3601S45A: RNCC: 3 | RNVC: 2
3601S45A: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-226-2552
Tube-Hose Fitting Compression Sleeve

142262552
2441834: RNCC: 3 | RNVC: 2
8006666: RNCC: 5 | RNVC: 2
0566004: RNCC: 5 | RNVC: 2
P109325D: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-435-3279
Tube Tee

144353279
10RA12L12L8LNU: RNCC: 3 | RNVC: 2

7 Nov 1989

4730-14-373-4263
Fluid Passage Bolt

143734263
50816: RNCC: 3 | RNVC: 2

21 Oct 1981

4730-14-297-5598
Tube Tee

142975598
R6SX8X6: RNCC: 3 | RNVC: 2
3ARS230: RNCC: 5 | RNVC: 1

1 Jan 1973

4730-14-453-9511
Tube To Hose Straight Adapter

144539511
LN324-100-11-084DN150: RNCC: 3 | RNVC: 2

17 Mar 1992

4730-14-309-3193
Tube To Boss Straight Adapter

143093193
NO PRIMARY REF14-309-3193: RNCC: 3 | RNVC: 2
56376: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-492-1181
Hose To Boss Straight Adapter

144921181
NO PRIMARY REF14-492-1181: RNCC: 3 | RNVC: 2
20-0037: RNCC: 5 | RNVC: 9
F300 0T 006 9648: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-299-6575
Threaded Tube Fitting Plug

142996575
A3-24268: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-228-6926
Tube Coupling

142286926
GSM1297FC1TABLEAU2D1-20: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-361-3065
Tube To Boss Straight Adapter

143613065
143E45-25-02: RNCC: 3 | RNVC: 2

24 Jan 1980

4730-14-479-7032
Air Shift Chamber Hose Adapter

144797032
4125-0800: RNCC: 3 | RNVC: 2
544314: RNCC: 5 | RNVC: 2

31 Jan 1996

4730-14-501-2164
Tube To Boss Straight Adapter

145012164
420.009: RNCC: 3 | RNVC: 2
420-009: RNCC: 3 | RNVC: 2
F300 0T 025 2569: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-282-6475
Raccord Chargement

142826475
10155: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-247-1684

4730-14-552-0197
Tube Coupling Nut Assembly

145520197
ABE04-02: RNCC: 3 | RNVC: 2

20 Nov 2006

4730-14-367-9746
Quick Disconnect Coupling Half

143679746
RBE03.2904/3/FB: RNCC: 3 | RNVC: 2
RBE3-2904-3DKRFB: RNCC: 5 | RNVC: 9
RBE03-2904-3DKRFB: RNCC: 5 | RNVC: 9
85-691-3481: RNCC: 6 | RNVC: 9

19 Jan 1981

4730-14-484-4942
Fluid Flow Restrictor

144844942
566205: RNCC: 3 | RNVC: 2

21 Nov 1996

4730-14-436-6079
Fluid Pressure Line Multiple Connector

144366079
A11B532360310N1: RNCC: 3 | RNVC: 2

3 Jan 1990

4730-14-496-5540
Tube To Boss Straight Adapter

144965540
643 060 02: RNCC: 3 | RNVC: 2
64306002: RNCC: 5 | RNVC: 2
F300 0T 017 4664: RNCC: 6 | RNVC: 9
F300 0T 021 6594: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-443-6970
Reducing Tube Coupling Nut

144436970
0271801130: RNCC: 3 | RNVC: 2

5 Dec 1990

4730-14-540-5951
Return Tube Bend

145405951
510718639: RNCC: 3 | RNVC: 2

7 Apr 2004

4730-14-551-5288
Fluid Pressure Line Multiple Connector

145515288
533024: RNCC: 3 | RNVC: 2

28 Sep 2006

4730-14-378-5012
Fluid Pressure Line Multiple Connector

143785012
6T18SM6KDV: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-503-2084
Tube Coupling

145032084
RP1A504920036: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-410-9542
Ventil Tube Raccord

144109542
16173731: RNCC: 3 | RNVC: 2
16173731: RNCC: 5 | RNVC: 9

23 Jul 1986

4730-14-554-1966
Tube Union

145541966
356 033: RNCC: 3 | RNVC: 2
356 033: RNCC: 3 | RNVC: 2

13 Jun 2007

4730-14-220-6157
Tube Tee

142206157
R10X12X10: RNCC: 3 | RNVC: 2
R 10 12 10: RNCC: 5 | RNVC: 2
R14085: RNCC: 5 | RNVC: 2

1 Jan 1965

4730-14-414-5256
Tube Tee

144145256
4730GD0273: RNCC: 2 | RNVC: 2
BN324-554F4-273: RNCC: 3 | RNVC: 2

10 Feb 1987

4730-14-473-9621
Tube To Boss Straight Adapter

144739621
5A10L12-17CYL: RNCC: 3 | RNVC: 2
105121153: RNCC: 5 | RNVC: 2

18 Jan 1995

4730-14-349-1733
Tube To Boss Straight Adapter

143491733
702A30-0624-21: RNCC: 3 | RNVC: 2

19 Apr 1978

4730-14-485-1259
Tube Union

144851259
3EB01445/6: RNCC: 3 | RNVC: 2
DAH3EB01445/6: RNCC: 5 | RNVC: 9

10 Jan 1997

4730-14-214-4989

4730-14-210-9627

4730-14-341-4267
Manchon A Braser

143414267
NO PRIMARY REF14-341-4267: RNCC: 3 | RNVC: 2
419: RNCC: 5 | RNVC: 9

16 Mar 1977

4730-14-508-3388
Tube Fitting Insert

145083388
300908B: RNCC: 3 | RNVC: 2
213EPA64100-001REP.7: RNCC: 5 | RNVC: 2
300908A: RNCC: 5 | RNVC: 9

7 Sep 1998

4730-14-499-2605
Tube To Boss Straight Adapter

144992605
4DS16-3-8RNU: RNCC: 3 | RNVC: 2
4DS16 3-8RCYNU: RNCC: 3 | RNVC: 9
A07051708: RNCC: 5 | RNVC: 2
A07051708: RNCC: 5 | RNVC: 9
F300 0T 020 4978: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-357-1287
Tube To Boss Straight Adapter

143571287
9315-076-0: RNCC: 3 | RNVC: 2

7 Jun 1979

4730-14-542-6782
Tube Union

145426782
HLA5657-17: RNCC: 3 | RNVC: 9

28 Jul 2004

4730-14-228-0012
Bouchon Special

142280012
R530-11-9-205: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-498-8649
Tube To Boss Straight Adapter

144988649
522-13-22-0: RNCC: 3 | RNVC: 2
91931310: RNCC: 3 | RNVC: 2
F300 0T 009 4708: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-374-2958
Self-Sealing Coupling Half

143742958
S075-0-3-4-2026: RNCC: 3 | RNVC: 2
SM07512AU2026: RNCC: 5 | RNVC: 2
85-694-1302: RNCC: 6 | RNVC: 9

8 Dec 1981

4730-14-393-8952
Fluid Pressure Line Multiple Connector

143938952
366A76-1027-20: RNCC: 3 | RNVC: 2

23 Jun 1984

4730-14-537-0829
Fluid Pressure Line Multiple Connector

145370829
84423-10: RNCC: 1 | RNVC: 2
RA13010: RNCC: 3 | RNVC: 2

24 Sep 2003

4730-14-460-2745
Hose To Gas Fitting Straight Adapter

144602745
MAT139-01-01: RNCC: 3 | RNVC: 2

21 Jan 1993

4730-14-341-6690
Tube To Boss Straight Adapter

143416690
P4-12-6-12X125: RNCC: 3 | RNVC: 2

14 Apr 1977

4730-14-481-7584
Tube To Boss Straight Adapter

144817584
9DM6 5 10 C0: RNCC: 3 | RNVC: 2
4DM6P5-10C0: RNCC: 5 | RNVC: 2
9DM6-5-10C0: RNCC: 5 | RNVC: 2
F300 0T 005 2897: RNCC: 6 | RNVC: 9

30 May 1996

4730-14-304-0166
Tape Intermediaire

143040166
K1697CPL2REP24: RNCC: 3 | RNVC: 2
K1459APL2REP21: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-207-0591
Attache Chainette

142070591
0603480900: RNCC: 3 | RNVC: 2
0603480900: RNCC: 3 | RNVC: 2
0603480900: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-244-7197

4730-14-203-6477

4730-14-315-5121

4730-14-561-6250
Fluid Passage Bolt

145616250
073161X: RNCC: 3 | RNVC: 2

10 Aug 2009

4730-14-574-7148
Pipe Coupling

145747148
KA XX2510A: RNCC: 3 | RNVC: 2

14 Feb 2013

4730-14-535-3033
Tube Union

145353033
10663680: RNCC: 3 | RNVC: 2

20 May 2003

4730-14-243-2873

4730-14-240-5384
Bouchon Filete Spec

142405384
70112: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-219-7963
Collier Tuyau Flexi

142197963
0947661011: RNCC: 3 | RNVC: 2
0947661011: RNCC: 5 | RNVC: 9
947661011: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-272-4902

4730-14-526-1859
Tube Union

145261859
VR161764-Z+VR16885: RNCC: 3 | RNVC: 2

9 Jul 2001

4730-14-375-5206
Tube To Boss Straight Adapter

143755206
FTXS10 3-8: RNCC: 3 | RNVC: 2
6-6FMTXS: RNCC: 3 | RNVC: 2
6-6FMTXS: RNCC: 3 | RNVC: 2
FTXS10-3-8: RNCC: 5 | RNVC: 9

26 Feb 1982

4730-14-404-4056
Tube Union

144044056
340GCU18 3/4: RNCC: 3 | RNVC: 2

30 Oct 1985

4730-14-419-0219
Fluid Pressure Line Multiple Connector

144190219
C0R4BRAB10-1/4: RNCC: 3 | RNVC: 2
C0R4BRAB10-1/4: RNCC: 3 | RNVC: 9

29 Sep 1987

4730-14-269-1603
Pipeline Flexible Spacer

142691603
4054: RNCC: 3 | RNVC: 2
4: RNCC: 5 | RNVC: 2
42: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-274-2483
Sediment Strainer Element

142742483
326590: RNCC: 3 | RNVC: 2
20326590-7: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-432-9490
Tube Union

144329490
X78888-2-8: RNCC: 3 | RNVC: 2

5 Jul 1989

4730-14-506-9568
Hose To Gas Fitting Straight Adapter

145069568
1760.105: RNCC: 3 | RNVC: 2
368624: RNCC: 5 | RNVC: 2

27 May 1998

4730-14-277-8426

4730-14-456-9954
Hose Coupling Assembly

144569954
DA2C500053250: RNCC: 3 | RNVC: 2

30 Jul 1992

4730-14-484-6692
Fluid Passage Bolt

144846692
29445194: RNCC: 3 | RNVC: 2

28 Nov 1996

4730-14-369-4447
Tube To Boss Straight Adapter

143694447
DLT587870: RNCC: 3 | RNVC: 2

17 Apr 1981

4730-14-426-7366
Tube Tee

144267366
4730HEEG017,2X2,3: RNCC: 2 | RNVC: 2

20 Sep 1988

4730-14-505-4791
Pipe Flange

145054791
374297: RNCC: 3 | RNVC: 2

18 Mar 1998

4730-14-386-9964
Tube Coupling

143869964
HBRAB22: RNCC: 3 | RNVC: 2
HBRAB22: RNCC: 3 | RNVC: 2

24 Aug 1983

4730-14-394-7747
Tube Tee

143947747
39305482REP3: RNCC: 3 | RNVC: 2

28 Aug 1984

4730-14-358-2145
Tube Coupling

143582145
RFL87098: RNCC: 3 | RNVC: 2
9567150380: RNCC: 5 | RNVC: 2

13 Aug 1979

4730-14-370-4959
Hose Coupling Assembly

143704959
9945715: RNCC: 3 | RNVC: 2

18 May 1981

4730-14-410-7239
Fluid Pressure Line Multiple Connector

144107239
160H702501-21: RNCC: 3 | RNVC: 2

9 Jul 1986

4730-14-492-2577
Tube To Boss Straight Adapter

144922577
0011052236: RNCC: 3 | RNVC: 2
F300 0T 007 2491: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-274-4344

4730-14-269-2091

4730-14-216-4969
Coude Pour Tube

4730-14-278-4612
Fluid Passage Bolt

142784612
NO PRIMARY REF14-278-4612: RNCC: 3 | RNVC: 2
14588: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-273-5077
Tube Coupling

142735077
7062BA1RPET1-10UA9: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-498-3942
Tube To Boss Straight Adapter

144983942
91961243: RNCC: 3 | RNVC: 2
12-05-02-114: RNCC: 5 | RNVC: 9
F300 0T 004 9962: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-269-1818
Pipe Flange

142691818
7066CC1F30: RNCC: 2 | RNVC: 2
4730BE-30F: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-436-4572
Quick Disconnect Coupling Half

144364572
9970-115-734: RNCC: 3 | RNVC: 2

3 Jan 1990

4730-14-501-2161
Tube To Boss Straight Adapter

145012161
420-005: RNCC: 3 | RNVC: 2
420.005: RNCC: 3 | RNVC: 2
F300 0T 025 2566: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-366-5947

4730-14-325-3836
Buse Fixe

143253836
HM43582A: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-249-8458

4730-14-315-5260

4730-14-306-7080

4730-14-416-3081
Tube To Boss Straight Adapter

144163081
4730AJ4.4DN20NU: RNCC: 2 | RNVC: 2
Q15GE20S1/2BSPK NU: RNCC: 3 | RNVC: 2
MEC10819: RNCC: 3 | RNVC: 2
8405202166NU: RNCC: 5 | RNVC: 2

3 Jun 1987

4730-14-449-9568
Quick Disconnect Coupling Half

144499568
RBA06-6810/CP: RNCC: 3 | RNVC: 2

18 Sep 1991

4730-14-260-9197
Pipe Flange

142609197
7062CE1F2-57AF42-2: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-261-2596
Corps De Raccord

142612596
175-52-29: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-268-1183
Tube Tee

142681183
6784-1CK14: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-346-7049
Plaque De Reduction

143467049
6784-1DH28-10A: RNCC: 2 | RNVC: 2
MEC11221: RNCC: 3 | RNVC: 2

12 Dec 1977

4730-14-312-5097
Tube Tee

143125097
A10-71-493-15-0: RNCC: 3 | RNVC: 2
A10-71-493-15-0: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-365-3024

4730-14-212-7711

4730-14-215-1541
Raccord Special Equ

142151541
632F39-90: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-563-3256
Hose Clamp

145633256
W1ZCE916: RNCC: 3 | RNVC: 2

26 Jan 2010

4730-14-341-7894
Tube Coupling Inverted Nut

143417894
202067: RNCC: 3 | RNVC: 2

14 Apr 1977

4730-14-270-5579
Pipeline Flexible Spacer

142705579
DILAT0FLEXSTANDARD125REPBLANC: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-386-9647
Tube-Hose Fitting Compression Sleeve

143869647
BI38S: RNCC: 3 | RNVC: 9

24 Aug 1983

4730-14-463-1797
Tube To Boss Straight Adapter

144631797
GE12LRA3CX: RNCC: 3 | RNVC: 2
149616819NU: RNCC: 3 | RNVC: 2
XGE12PLR: RNCC: 5 | RNVC: 9
XGE12PLR: RNCC: 5 | RNVC: 9

26 May 1993

4730-14-230-4108
Pipe Flange

142304108
DLT000202: RNCC: 3 | RNVC: 2
DLT00202: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-484-1706
Fluid Pressure Line Multiple Connector

144841706
AD1428C: RNCC: 3 | RNVC: 2

31 Oct 1996

4730-14-407-6808
Fluid Filter Element

144076808
64138001: RNCC: 3 | RNVC: 2

27 Feb 1986

4730-14-211-4093
Tube To Boss Straight Adapter

142114093
29337: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-295-3405
Tube Tee

142953405
R10X12X10L: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-226-4118
Tube To Boss Straight Adapter

142264118
0333900: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-549-0302
Tube Coupling Nut Assembly

145490302
9016CPV50813: RNCC: 3 | RNVC: 2

1 Mar 2006

4730-14-329-0302
Tube To Boss Straight Adapter

143290302
12-28-30X200: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-436-8417
Tube To Boss Straight Adapter

144368417
DA2C500051160: RNCC: 3 | RNVC: 2

3 Jan 1990

4730-14-376-8539

4730-14-282-9921
Quick Disconnect Coupling Half

142829921
E29572A80WW: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-562-9099
Tube To Boss Straight Adapter

145629099
01672122: RNCC: 3 | RNVC: 2

3 Dec 2009

4730-14-519-4313
Raccord Manometre

145194313
MTFLXM9007200A: RNCC: 3 | RNVC: 2

17 Mar 2000

4730-14-253-9718
Raccord Special

142539718
A21935: RNCC: 3 | RNVC: 2

13 Jan 2000

4730-14-575-8933
Tube-Hose Adapter Body

145758933
8816968011: RNCC: 3 | RNVC: 2

15 May 2013

4730-14-566-1199
Hose Cap

145661199
VKAM35LCF: RNCC: 3 | RNVC: 2

20 Oct 2010

4730-14-272-9640

4730-14-243-6645
Support De Tuyauter

142436645
272163: RNCC: 3 | RNVC: 2
272163: RNCC: 5 | RNVC: 9

1 Jan 1968

Load More Results